Product Lineup
LCD
Image Sensors
Power Devices
Photocouplers
Phototriac Couplers
Solid State Relay
Photointerrupters
Proximity/Gesture
Sensor
Light Detectors
Infrared Emitting Diode
Distance Measuring
Sensors (1)
PSD, 2PD Type
Distance Measuring
Sensors (2)
CMOS type
Distance Measuring
Sensors (3)
(ToF = Time of Flight)
Dust Sensor Unit
Optical-Electric
Sensors
IR Detecting Units for
Remote Control
Optoelectronics
Laser Diodes
RF Components
Sensor
Dust Sensor Unit
(Ta = 25°C)
Dust Sensor PDF(157KB)
BACK - NEXT
☆New product
Output Features Model No.
Analog output Pulse analog output, single-shot detection of house dust, general purpose GP2Y1010AU0F
Pulse analog output, single-shot detection of house dust, high sensitivity GP2Y1012AU0F
Pulse analog output, single-shot detection of house dust,
high precision GP2Y1014AU0F
Digital output
Digital (PWM) output, built-in microprocessor controller, single-shot detection of house dust, high
sensitivity GP2Y1023AU0F
Digital (UART) output, built-in microprocessor controller,
single-shot detection of house dust, high concentration ☆GP2Y1026AU0F
Digital (UART) output, built-in microprocessor controller, sensing can discriminate between PM2.5 and
PM10,
internal cleaning possible GP2Y1030AU0F
Model No. Features Topr
(°C)
Operating
supply
voltage (V)
Electro-optical characteristics
Dissipation
current
(mA)
Detection
concentration
µg/m 3 (TYP.)
Sensitivity Output
GP2Y1010AU0F
Datasheet
Application
Note
•Built-in infrared emitting diode, photodiode
and signal processing circuit
•Compact, single-shot detection of house
dust
•Output: Analog voltage
–10 to
+65
4.5 to 5.5 TYP. 11
0 to 600
0.5±0.15
V/
(0.1 mg/m
3)
Precision
±30%
Analog
voltage
GP2Y1012AU0F
•High sensitivity
•Built-in infrared emitting diode, photodiode
and signal processing circuit
•Compact, single-shot detection of house
dust
•Output: Analog voltage
0 to 240
1.0±0.15
V/
(0.1 mg/m
3)
Precision
±15%
Analog
voltage
GP2Y1014AU0F
•High precision
•Built-in infrared emitting diode, photodiode
and signal processing circuit
•Compact, single-shot detection of house
dust
•Output: Analog voltage
0 to 600
0.5±0.075
V/
(0.1 mg/m
3)
Precision
±15%
Analog
voltage
GP2Y1023AU0F
•High sensitivity
•Built-in microcomputer
•Built-in infrared emitting diode, photodiode
and signal processing circuit
•Compact, single-shot detection of house
dust
•Output: Digital signal output (PWM) 4.75 to
5.25 TYP. 15
0 to 240
1.4±0.21
ms/
(0.1 mg/m
3)
Precision
±15%
Digital
signal
(PWM)
Temperature
correction
Averaging
☆GP2Y1026AU0F
•High concentration
•Built-in microcomputer
•Built-in infrared emitting diode, photodiode
and signal processing circuit
•Compact, single-shot detection of house
dust
•Output: Digital signal output (UART)
0 to 1 000
0.35±0.06
V/
(0.1 mg/m
3)
Precision
±15%
Digital
signal
(UART)
Temperature
correction
Averaging
GP2Y1030AU0F
•Built-in microcomputer
•Built-in infrared emitting diode, photodiode
and signal processing circuit
•Compact, single-shot detection of house
dust
•Sensing can discriminate between PM2.5
and PM10
•Internal cleaning possible
3 to 5.5 TYP. 25 0 to 500 Precision
±15%
Digital
signal
(UART)
Product Lineup > Optoelectronics > Distance Measuring Sensor > Dust Sensor Unit
GP2Y1010AU0F
(GP2Y1012AU0F, GP2Y1014AU0F, GP2Y1023AU0F, GP2Y1026AU0F)
GP2Y1030AU0F
※Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please
contact SHARP.
*RoHS Directive:Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain
exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
You need Adobe Reader to view PDF files.
Click the banner to download.
Back to top
