Six-Element SMD Photodiode Array OPR2100, OPR2100T, OPR2100HS, OPR2100HST Features: * * * * * * Six-PIN photodiode array High-temperature chip carrier Closely matched responsivity between elements Choice of low or high speed Easily mountable in any configuration Suitable for harsh industrial operating conditions Description: Each OPR2100 device is a six-element photodiode that is designed to meet the needs of motor encoder applications. Designed specifically for industrial encoder applications, the OPR2100 features a high temperature SMD chip carrier, a temperature range and a low leakage current that can withstand extreme operating conditions. These devices have an opaque chip carrier that encloses six individual chips, which are mounted on isolated cathode contacts to allow external connection in any desired configuration. The opaque polyimide package shields the photodiodes from stray light and can withstand multiple exposures to the most demanding soldering conditions, while the gold-plated wraparound solder pads provide exceptional storage and wetting characteristics. See Application Bulletin 237 for handling instructions. Applications: * * Motor encoder applications Industrial encoder applications Ordering Information Part Number Sensor OPR2100 Photodiode Array 6 0.45 50 3.45 55kHz Tube OPR2100T Photodiode Array 6 0.45 50 3.45 55kHz Tape & Reel OPR2100HS Photodiode Array 6 0.45 50 3.45 200kHz Tube OPR2100HST Photodiode Array 6 0.45 50 3.45 200kHz Tape & Reel # of Responsivity Reverse Voltage Active Area Bandwidth Packaging Elements (mA/mW) Min Breakdown mm2(each) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue E 06/2012 Page 1 of 2 Six-Element SMD Photodiode Array OPR2100, OPR2100T, OPR2100HS, OPR2100HST Pin # Description 0 Ground Plane 1 Cathode A 2 Cathode B 3 Anode B 4 Anode C 5 Cathode C 6 Cathode D 7 Anode D 8 Cathode E 9 Anode E 10 Anode F 11 Cathode F 12 Anode A OPR2100 Warning: Front Window is pressure sensitive. Do not apply pressure or high vacuum to window. Cathode Anode Absolute Maximum Ratings (TA = 25 C unless otherwise noted) Storage and Operating Temperature -55 C to +125 C Reverse Breakdown Voltage 50 V / minute (1) Solder reflow time within 5C of peak temperature is 20 to 40 seconds 250 C Electrical Characteristics (TA = 25 C unless otherwise noted) SYMBOL R VBR PARAMETER Responsivity Reverse Breakdown Voltage MIN TYP MAX UNITS TEST CONDITIONS 0.45 - - A/W 50 - - V IR= 10 A Ee = 10 W, = 890 nm, V = 0 V ID Reverse Dark Current - - 10 nA VR= 10 V, Ee = 0 BW Bandwidth - - 200 kHz TA 125C CT Capacitance - 10 - pF VR = 10 V Lx W Active Area (per diode) - 3.45 - 2 mm 2.73 mm x 1.34 mm Notes: 1. Solder time less than 5 seconds at temperature extreme. 2. Package thermal resistance is 142 C / W Spectral Responsivity 100 90 Relative Response (%) 80 70 60 50 40 30 20 10 0 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 Wavelength (m) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue E 06/2012 Page 2 of 2 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com