Advanced Power TOPLED(R) Plus Enhanced ThinFilm LED Lead (Pb) Free Product - RoHS Compliant LR G5AP Released Besondere Merkmale * Gehausetyp: weies P-LCC-4 Gehause, klarer Silikon - Verguss, klare Silikonlinse * Besonderheit des Bauteils: mehr Licht durch Features * package: white P-LCC-4 package, colorless clear silicone resin, clear silicone lens * feature of the device: more light due to higher erhohten optischen Wirkungsgrad; hoherer Strom bei gleicher Umgebungstemperatur im Vergleich zur PowerTOPLED moglich; Linse mit Uberverguss * * * * * * * * * optical efficiency; higher current at the same ambient temperature possible compared to Power TOPLED; lens with overcasting * * * * * Wellenlange: 623 nm (rot) Abstrahlwinkel: 145 Technologie: InGaAlP Dunnfilm optischer Wirkungsgrad: 65 lm/W (rot) Gruppierungsparameter: Lichtstarke, Durchflussspannung Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet Lotmethode: Reflow Loten Vorbehandlung: nach JEDEC Level 2 Gurtung: 12 mm Gurt mit 3500/Rolle, * * * * * o 330 mm wavelength: 623 nm (red) viewing angle: 145 technology: InGaAlP ThinFilm optical efficiency: 65 lm/W (red) grouping parameter: luminous intensity, forward voltage assembly methods: suitable for all SMT assembly methods soldering methods: reflow soldering preconditioning: acc. to JEDEC Level 2 taping: 12 mm tape with 3500/Rolle, o 330 mm ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-D * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-D Anwendungen * Hinterleuchtung (LCD, Displays, Werbebeleuchtung, Allgemeinbeleuchtung) * Ersatz von Kleinst-Gluhlampen * Dekorative Lichtleiter-Anwendungen * Signal- und Symbolleuchten zur Orientierung * Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.a.) * Fassadenbeleuchtung im Innen- und Auenbereich 2010-11-17 Applications * backlighting (LCD, displays, illuminated advertising, general lighting) * substitution of micro incandescent lamps * decorative and entertainment lighting (incl. fiber optic illumination) * signal and symbol luminaire for orientation * marker lights (e.g. steps, exit ways, etc.) * indoor and outdoor commercial and residential architectural lighting 1 Released LR G5AP Bestellinformation Ordering Indormation Typ Type LR G5AP-BZCZ-1-1 Anm.: Emissionsfarbe Color of Emission Lichtstarke1) Seite 17 Lichtstrom2) Seite 17 Bestellnummer Luminous Intensity1) page 17 IF = 100 mA IV (mcd) Luminous Flux2) page 17 IF = 100 mA V (mlm) Ordering Code red 2400 ... 4500 13800 (typ.) Q65110A8036 Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LR G5AP-BZCZ-1-1 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen BZ, CX, CY oder CZ enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LR G5AP-BZCZ-1-1 bedeutet, dass das Bauteil innerhalb der auf Seite 4 spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Gleiches gilt fur die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Durchlassspannungsgruppe geliefert. Z.B.: LR G5AP-BZCZ-1-1 bedeutet, dass nach Durchlassspannung gruppiert wird. Auf einem Gurt ist nur eine der Durchlasspannungsgruppen -L, -M oder -H enthalten (siehe Seite 5 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Durchlassspannungsgruppen nicht direkt bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LR G5AP-BZCZ-1-1 means that only one group BZ, CX, CY or CZ will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LR G5AP-BZCZ-1-1 means that the device will be shiped within the specified limits as stated on page 4. In order to ensure availability, single wavelength groups will not be orderable. In a similar manner for LED, where forward voltage groups are measured and binned, single forward voltage groups will be shipped on any one reel. E.g. LR G5AP-BZCZ-1-1 means that only 1 forward voltage group -L, -M or -H will be shippable. In order to ensure availability, single forward voltage groups will not be orderable (see page 5 for explanation). 2010-11-17 2 Released LR G5AP Grenzwerte Maximum Ratings (TA=25C) Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebstemperatur Operating temperature range Top - 40 ... + 85 C Lagertemperatur Storage temperature range Tstg - 40 ... + 85 C Sperrschichttemperatur Junction temperature Tj >150 for short term applications C Sperrschichttemperatur Junction temperature Tj + 125 C 27 200 mA mA Durchlassstrom Forward current (TA=25C) (min.) IF (max.) IF Stostrom Surge current t 10 s, D = 0.1; TA=25C IFM 500 mA Sperrspannung3) Seite 17 Reverse voltage3) page 17 (TA=25C) VR not designed for reverse operation V 2010-11-17 3 Released LR G5AP Kennwerte Characteristics (TA = 25 C) Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 100 mA Dominantwellenlange4) Seite 17 Dominant wavelength4) page 17 IF = 100 mA Symbol Symbol Werte Values Einheit Unit (typ.) peak 632 nm (min.) (typ.) (max.) dom dom dom 616 623 628 nm nm nm Spektrale Bandbreite bei 50 % rel max Spectral bandwidth at 50 % rel max IF = 100 mA (typ.) 18 nm Abstrahlwinkel bei 50 % V (Vollwinkel) Viewing angle at 50 % V (typ.) 2 145 Grad deg. Durchlassspannung5) Seite 17 Forward voltage5) page 17 IF = 100 mA (min.) (typ.) (max.) VF VF VF 1.80* 2.30 2.50 Sperrstrom Reverse current VR = 12 V (typ.) IR (max.) IR Optischer Wirkungsgrad Optical efficiency IF = 100 mA Warmewiderstand Thermal resistance Sperrschicht/Lotpad Junction/solder point opt (typ.) Rth JS Rth JS (typ.) (max.) * Einzelgruppen siehe Seite 5 Individual groups on page 5 **Rth(max) basiert auf statistischen Werten Rth(max) is based on statistic values 2010-11-17 4 not designed for reverse operation V V V A A 59 lm/W 40 50** K/W K/W Released LR G5AP Durchlassspannungsgruppen3) Seite 17 Forward Voltage Groups3) page 17 Gruppe Group rot red Einheit Unit min. max. L 1.80 2.10 V M 2.00 2.30 V H 2.20 2.50 V Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group BZ CX CY CZ Anm.: Note: Lichtstarke1) Seite 17 Luminous Intensity1) page 17 IV (mcd) 2400 ... 2800 ... 3300 ... 3900 ... 2800 3300 3900 4500 Lichtstrom2) Seite 17 Luminous Flux2) page 17 V (mlm) 10400 12200 14400 16800 Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus 4 Helligkeitsgruppen. Einzelne Helligkeitsgruppen sind nicht bestellbar. The standard shipping format for serial types includes a family group of 4 individual brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: BZ-L Example: BZ-L Helligkeitsgruppe Brightness Group Durchlassspannungsgruppe Forward Voltage Group BZ L Anm.: Note: (typ.) (typ.) (typ.) (typ.) In einer Verpackungseinheit / Gurt ist immer nur eine Gruppen fur jede Selektion enthalten. No packing unit / tape ever contains more than one group for each selection. 2010-11-17 5 Released LR G5AP Relative spektrale Emission2) Seite 17 Relative Spectral Emission2) page 17 V() = spektrale Augenempfindlichkeit / Standard eye response curve rel = f (); TA = 25 C; IF = 100 mA OHL03666 100 I rel % 80 V red 60 40 20 0 400 450 550 500 600 650 nm 700 Abstrahlcharakteristik2) Seite 17 Radiation Characteristic2) page 17 rel = f (); TA=25C 40 30 20 10 0 OHL03691 1.0 50 0.8 60 0.6 70 0.4 80 0.2 0 90 100 2010-11-17 1.0 0.8 0.6 0.4 0 6 20 40 60 80 100 120 Released LR G5AP Durchlassstrom2) Seite 17 Forward Current2) page 17 IF = f (VF); TA = 25 C solid line: specified DC-range IF 10 3 mA Relative Lichtstarke2)6) Seite 17 Relative Luminous Intensity2) 6) page 17 V/V(100 mA) = f (IF); TA = 25 C solid line: specified DC-range OHL03808 IV (100 mA) 5 10 2 10 0 5 5 10 1 1.6 1.8 2 2.2 2.4 2.6 2.8 10 -1 10 1 V 3.2 5 10 2 mA 10 3 IF VF 2010-11-17 OHL03803 10 1 IV 7 Released LR G5AP Relative Spannung2) Seite 17 Relative Voltage2) page 17 VF = f (Tj); IF = 100 mA Relative Lichtstarke2) Seite 17 Relative Luminous Intensity2) page 17 V/V(25 C)= f (Tj); IF = 100 mA OHL03796 0.20 V OHL03799 1.4 IV VF IV (25 C) 0.10 1.0 0.05 0.8 0 -0.05 0.6 -0.10 0.4 -0.15 -0.20 -40 -20 0 20 40 60 80 0.2 -40 -20 0 C 120 Tj OHL03797 dom 3 1 -1 -3 -5 -7 -40 -20 0 20 40 60 80 C 120 Tj 2010-11-17 C 120 Tj Dominante Wellenlange2) Seite 17 Dominant Wavelength2) page 17 LR, dom = f (Tj); IF = 100 mA 7 nm 20 40 60 80 8 Released LR G5AP Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (TS) IF OHL03681 300 mA 200 150 100 50 Do not use current below 30 mA 0 0 20 40 60 80 C 100 TS Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C OHL03683 0.55 A t IF D = TP D = TP T 0.40 0.35 0.35 0.25 0.20 0.15 0.10 0.05 0.30 D= 0.25 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.20 0.15 0.10 0.05 tP IF T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2010-11-17 t IF IF 0.40 0.30 OHL03683 0.55 A tP 9 Released LR G5AP Mazeichnung7) Seite 17 Package Outlines7) page 17 Gurtung / Polaritat und Lage7) Seite 17 Method of Taping / Polarity and Orientation7) page 17 Verpackungseinheit 3500/Rolle, o330 mm Packing unit 3500/reel, o330 mm 2 (0.079) 0.05 (0.002) 0.3 (0.012) 0.05 (0.002) 12 (0.472) 4 (0.157) 6.05 (0.238) 1.5 (0.059) +0.1 (0.004) 1.5 (0.059) Cathode/ Collector Side 1.75 (0.069) Markierung mark 50 mg 5.5 (0.217) 0.05 (0.002) Kathodenkennung: Cathode mark: Gewicht / Approx. weight: 1.4 (0.055) 8 (0.315) 2.25 (0.089) 3.6 (0.142) 2010-11-17 10 OHTY3600 Released LR G5AP Empfohlenes Lotpaddesign7) Seite 17 Recommended Solder Pad7) page 17 Reflow Loten Reflow Soldering 6.2 (0.244) 0.8 (0.031) 0.3 (0.012) 1.5 (0.059) 3.8 (0.150) 1.9 (0.075) Cu-Flache 16 mm 2 Cu-area OHPY3665 Anm.: Das Gehause ist fur Ultraschallreinigung nicht geeignet Note: Package not suitalbe for ultra sonic cleaning 2010-11-17 11 Released LR G5AP Lotbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering (nach J-STD-020D) (acc. to J-STD-020D) OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C 255 C 240 C T 250 C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 t 2010-11-17 12 s 300 Released LR G5AP Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto LMW CNAP Semiconductors BIN1: EA-5O-0-140-D OSLON RoHS Compliant (6P) BATCH NO: 1004067407 ML Temp ST 2 260 C R (1T) LOT NO: 1234567890 (9D) D/C: 1013 Pack: R18 DEMY 022 B_R999_1880.1642 R (X) PROD NO: 11058300 (Q)QTY: 2000 (G) GROUP: EA-5O-0-D OHA04563 Gurtverpackung Tape and Reel Tape dimensions in mm (inch) W P0 P1 P2 D0 E F 12 + 0.3 - 0.1 4 0.1 8 0.1 2 0.05 1.5 + 0.1 1.75 0.1 5.5 0.05 (0.157 0.004) (0.315 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.217 0.002) Reel dimensions in mm (inch) A 330 (13) 2010-11-17 W Nmin W1 W2 max 12 (0.472) 60 (2.362) 12.4 + 2 (0.488 + 0.079) 18.4 (0.724) 13 Released LR G5AP Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print L VE LE l k, If see labe code blan bar ). (RH . RH idity hum 0% e tive d C/6 kag rela are 30 s _ < infr pac IVE RS of TO rs 90% to ak tain SIT rs < ns ed (pe UC e). or rs con Hou SEN rs Hou ND and ject ditio cod C, 72 sing Hou e 5 bag E 48 C sub Hou con s UR ICO ces 24 6 dat 40 be time C ory ThiISTSEM pro < time . or 23 time at t will l with or fact entC) . MO Flo time s TO at or at Flo l tica d tha or ival ure nth OP Flo 4 if: rea w Flo labe mo ices iden 5 ced equ el n e 5a is el ing, belo or 24 pro 6 Lev e dev : el e cod , unt whe Lev el re ow, see bag Lev l dat re mo bak bar ned Lev refl istu 10% re led time sea for istu ore> re ope e Mo see istu k, is or . sea is has k, Mo bef istu d 033 Mo in Flo RH blan Mo or-p blan in bag Car ing, r TDlife (if If with t. r lf 10%bak or J-S thisvapp. Yea _ eks rs < r ed icat med, C 1 Yea tem She ow, at uire not > y 1 WeHou DE unt Afte Ind 4 uire refl is red req 2. bod Mo /JE time 168 req : 2b a) Sto ices idity time or is IPC or time b) ned Flo or Hum ing ce time or Dev 2a e Flo a) ope or 3. b) bakren Flo 1 l dat Flo If 2 refe time el 2a 4. el sea 3 Lev el and Lev el re Bag e Lev re Lev istu Dat re istu re Mo istu Mo istu Mo Mo Barcode label N O TI U A C 1. M RA OS Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM OSR Desiccant OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials 8 Q- 1 R1 lti LS TO Y T6 PL 76 1+ P- Mu rs D/C : 01 O pt o to uc nd 00 (9D ) 4 co 20 23 (1T ) 5 14 2 110 0 (Q) QT Y: BA TC H H1 NO : 998 3G O SR mi AM 021 LO T (6P ) Se 210 44 ). NO : 12 see labe N NO : TIO PR OD U (X) A (G) l k, C GR OU P: Muster L VE LE code (RH blan If y bar . idit RH hum 60% e tive d C/ kag rela are 30 E S s _ < infr pac OR of tainITIV 90% to ak urs CT < e). or urs ted (pe ons con NS Ho g urs SE DU Ho and jec diti cod C, 72 sin Ho urs e 5 bag E ON 48 C sub e Ho con ces is UR 24 6 dat e MIC 40 be tim h C e ThISTSE pro < tory tim . or t wit 23 tim e at t will C) or fac MO . Flo al len tim TO s at or at Flo d or iva ure el nth s tha OP ntic Flo 4 if: rea Flo , lab ow mo ice equ ide 5 ced el e 5a is el ingen bel or 24 pro 6 Lev e dev, : el cod e , unt wh Lev el re ow see bag Lev l dat re mo bak e bar ned Lev refl istu 10% re led tim sea for istu ore> re ope se Mo see 3 istu is or . sea is Mo nk, bef istu pha nk, Flo , rd -03 Mo RH bla in Mo orbag Ca bla ing TD life (if ar If with t. vapp. 10%baktor J-S this elf Ye ar eks , _ < ed ica med, C 1 urs Ye erow tem Sh at uire not > y 1 WeHo unt DE Aft Ind 1. e 4 uire refl red req 2. bod Mo e ity is /JE tim 168 req : e 2b a) Sto es tim or mid is IPC or tim e vic b) ned Flo or Hu tim ing ce or De e 2a Flo a) ope or ren 3. b) bak Flo e 1 l dat Flo If 2 el refe tim 2a 4. el sea 3 Lev g el and Lev el re Ba te Lev re Lev istu Da re istu re Mo istu Mo istu Mo Mo DE MY Barcode label ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Tem 2a 220 3 240 p ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: Barcode label DE MY 8 Q- 1 R1 lti LS TO Y T6 PL 76 1+ P- Mu AM 99 8 D/C : 01 21 00 (9D ) 00 SR 21 : 4 20 23 O (6P ) (X) PR OD O NO : (1T ) 11 00 LO T 14 2 5 NO : 12 3G BA TC H H1 (Q) QT Y: Se SR m A ico M nd O uc pt to o rs NO 44 (G) GR OU P: Muster ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Te 2a 220 mp 3 240 ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: in Packing Sealing label OHA02044 Dimensions of transportation box in mm (inch) Breite / Width 352 5 (13,858 0,1968) 2010-11-17 Lange / length Hohe / height 352 5 (13,858 0,1968) 33 5 (1,3 0,1968) 14 Released LR G5AP Revision History: 2010-11-17 Previous Version: 2010-10-04 Page Subjects (changes since last revision) Date of change 2, 5 brightness range changed 2008-01-22 1, 9 reel quantity changed 2008-01-22 5 Forward Voltage Groups changed 2008-04-10 3 Forward current (min) changed 2008-04-10 9 Package Outlines updated 2008-04-10 7, 8 Diagrams updated 2008-04-10 13 Tape and Reel updated 2008-04-10 13 Tape and Reel updated 2008-06-05 2 ordering code added 2008-09-17 all datasheet released 2008-09-17 1, 10 packing unit changed 2008-10-16 1, 12 preconditioning corrected 2008-11-20 1, 10 Packing unit corrected 2009-10-13 15 Eye safety information added 2010-08-26 1, 10 Packing unit corrected 2010-08-26 13 Packagelabel changed, OS-IN-2010-032 2010-10-04 1,12 JEDEC Level changed from 4 to 2 2010-11-17 2010-11-17 15 Released LR G5AP Wegen der Streichung der LED aus der IEC 60825 erfolgt die Bewertung der Augesicherheit nach dem Standard CIE S009/E:2002 / IEC 62741 ("photobiological safety of lamps and lamp systems") Im Risikogruppensystem dieser CIE- Norm erfullen die in diesem Datenblatt angegebenen LED die "exempt"- Gruppe (die die sich im "sichtbaren" Spektralbereich auf eine Expositionsdauer von 10000s bezieht). Unter realen Umstanden (fur Expositionsdauer, Augenpupille, Betrachtungsabstand) geht damit von diesen Bauelementen keinerlei Augengefahrdung aus. Grundsatzlich sollte jedoch erwahnt werden, dass intensive Lichtquellen durch ihre Blendwirkung ein hohes sekundares Gefahrenpotenzial besitzen. Wie nach dem Blick in andere helle Lichtquellen (z.B. Autoscheinwerfer) auch, konnen temporar eingeschranktes Sehvermogen und Nachbilder je nach Situation zu Irritationen, Belastigungen, Beeintrachtigungen oder sogar Unfallen fuhren. Due to the cancellation of the LED from IEC 60825, the evaluation of eye safety occurs according to the standard CIE S009/E:2002 / IEC 62741 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LEDs specified in this data sheet fall into the "exempt" group (relating to devices in the visible spectrum with an exposure time of 10000s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components8) page 17 may only be used in life-support devices or systems9) page 17 with the express written approval of OSRAM OS. 2010-11-17 16 Released LR G5AP Funoten: 1) Helligkeitswerte werden wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 8 % und einer erweiterten Messunsicherheit von +/- 11 % gemessen (gema GUM mit Erweiterungsfaktor k = 3). 2) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische technische oder abgeleitete Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen oder abgeleiteten Werten unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 3) Die LED kann kurzzeitig in Sperrichtung betrieben werden. 4) Die dominante Wellenlange wird wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 0,5 nm und einer erweiterten Messunsicherheit von +/- 1 nm gemessen (gema GUM mit Erweiterungsfaktor k = 3). 5) Vorwartsspannungen werden wahrend eines Strompulses einer typischen Dauer von 8 ms, mit einer internen Reproduzierbarkeit von +/- 0,05 V und einer erweiterten Messunsicherheit von +/- 0,1 V gemessen (gema GUM mit Erweiterungsfaktor k=3). 6) Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. Dimmverhaltnis im Gleichstrom-Betrieb max. 5:1. 7) Mae werden wie folgt angegeben: mm (inch) 8) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. 9) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: 1.) Brightness values are measured during a current pulse of typical 25 ms, with an internal reproducibility of +/- 8 % and an expanded uncertainty of +/- 11 % (acc. to GUM with a covage factor of k = 3) Due to the special conditions of the manufacturing processes of LED, the typical or calculated data of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical or calculated data of the typical characeristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 3) Driving the LED in reverse direction is suitable for short term application. The dominant wavelength is measured at a current pulse of typical 25 ms, with an internal reproducibility of +/- 0,5 nm and an expanded uncertainty of +/- 1 nm (acc. to GUM with a coverage factor of k=3). 4) 5) The forward voltage is measured during a current pulse of typical 8 ms, with an internal reproducibility of +/- 0,05 V and an expanded uncertainty of +/- 0,1 V (acc. to GUM with a coverage factor of k=3). 6) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. Dimming range for direct current mode max. 5:1 7) Dimensions are specified as follows: mm (inch) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 8) 9) Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2010-11-17 2) 17 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.