Meets ANSI/ESD S20.20 and Packaging standard ANSI/ESD S541 --- - -W - --- ----------- D -- * Lids sold separately SPECIFICATIONS Properties Surface Resistance Discharge Shielding Sloughing Test 37509 37508 37501 37500 37512 37520* 37505 37506 37527 37524 17" x 9-7/8" x 2-1/2" 16-7/8" x 10" x 3-1/2" 16-7/8" x 10" x 5-3/8" 17" x 9-7/8" x 7-1/4" 17" x 13" x 8-3/4" 18-3/8" x 12-3/8" x 6-3/4" 18-1/2" x 12-3/8" x 18-3/4" 18-5/8" x 15" x 5-7/8" 18-5/8" x 15" x 8" 18-5/8" x 15" x 10" * Inside Dimension Sold Separately * These items made to order -- -- Typical Values 1 x 106 to < 1 x 109 ohms < 50 nanoJoules Negligible surface damage at 10 cycles and <5% of surface damage at 200 cycles in Taber Abrasion Test. No conductive particles abrased from surface Complete recyclability of package Recyclability Part # Box Size - L x W x D* -- - L- -- Lid 37550 37550 37550 37550 37551 37553 37553 37554 37554 37554 Part # Box Size - L x W x D* 37525 37526 37530 37532 37516 37517 37514 37504 37515 18-5/8" x 15" x 12" 18-5/8" x 15" x 14" 21-7/8" x 18-7/8" x 4-1/4" 22" X 18-7/8" X 8" 22-7/8" x 12-7/8" x 6" 22-7/8" x 12-7/8" x 8" 22-7/8" x 12-7/8" x 10" 22-7/8" x 12-7/8" x 12-5/8" 22-7/8" x 12-7/8" x 15-1/4" Features * Shields ESD sensitive items from electrostatic charges and electrostatic discharges (with lid in place). * Available with optional lid, steel reinforcing frame for additional strength and durability, ESD handles, and permanently static dissipative bottom foam pad for cushioning * Impregnated corrugated material; greater durability than coated or printed material * Constructed with double sides, double (boxes under 6" deep) or triple (boxes over 6" deep) ends, and single (boxes under 6" deep) or double (boxes over 6" deep) thickness bottom for greater durability * Surface Resistance: 1 x 106 to < 1 x 109 ohms per ANSI/ESD STM11.11 minimizing the potential of rapid discharge or sparking * Buried shielding layer minimizing the potential of sloughing and rub-off contamination * Made from 100% recycled material, and is 100% recyclable * No tooling cost * Easy assebmly without the need for tape, glue, or staples * Reusable, ensuring low cost Test Procedures/Method ANSI/ESD STM11.11 ANSI/ESD STM11.31 ASTM D4060 at 70 rpm with CS-17 abrasive-coated wheels and 1000 grams load Rockwell International Test Report of January 8, 1992 Rockwell International Test Report of January 8, 1992 Lid 37554 37554 37557 37557 37552 37552 37552 37552 37552 Made in the United States of America STORAGE CONTAINERS PROTEKTIVE PAK 13520 MONTE VISTA AVENUE, CHINO, CA 91710 PHONE (909) 627-2578 ProtektivePak.com (c) 2018 DESCO INDUSTRIES INC Employee Owned DRAWING NUMBER 37500 DATE: October 2018