731
P&B
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Catalog 1308242
Issued 3-03
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
Mechanical Data
Termination: .187" x .020" quick connect.
Enclosures: Clear polycarbonate dust cover.
Weight: 3.0 oz. (86g) approximately.
Environmental Data
Temperature Range:
Storage:
All Coils: -45°C to +105°C.
Operating:
DC Coils: -45°C to +70°C.
AC Coils: -45°C to +45°C.
Initial Dielectric Strength
Between Open Contacts: 500V rms.
Between Adjacent Contacts: 1,500V rms.
Between Contacts and Coil: 1,500V rms.
Operate Data @ 25°C
Must Operate Voltage:
DC Coils: 75% of nominal voltage or less.
AC Coils: 85% of nominal voltage or less.
Operate Time (Excluding Bounce): 15 milliseconds, typical,
at nominal voltage.
Release Time (Excluding Bounce):
DC Coils: 10 milliseconds, typical, at nominal voltage.
AC Coils: 10 milliseconds, typical, at nominal voltage.
Features
• AC coils 24, 120 & 240V 50/60 Hz.; DC 12 & 24VDC.
• Contact arrangement to 3PDT.
• Sockets available for all models.
• Accepted pin pattern for HVAC industry.
• Primarily designed for the HVAC industry.
KUP93 series
General Purpose
3 to 10 Amp, Multicontact
AC or DC Relay
File E22575
File LR15734
Users should thoroughly review the technical data before selecting a product
part number. It is recommended that users also seek out the pertinent
approvals files of the agencies/laboratories and review them to ensure the
product meets the requirements for a given application.
Coil Data @ 25°C
Nominal Power:
DC Coils: 1.2 Watts.
AC Coils: 2.7VA.
Initial Insulation Resistance: 100 megohms, min., at 25°C.
Contact Data @ 25°C
Material: Fine silver or silver-cadmium oxide.
Coil Data
*AC coils, ± 15%
Contact Ratings
Material UL/CSA Ratings Life
Expected
Fine silver 5A @ 28VDC or 240VAC, 80% PF,
1/10 HP @ 120VAC, 1/4 HP @ 240VAC 100,000
Silver- 10A @ 28VDC or 240VAC, 80% PF,
cadmium 1/4 HP @ 120VAC,1/3 HP @ 240VAC 100,000
oxide 10 FLA, 30 LRA @ 120VAC,
5 FLA,15 LRA @ 240VAC 30,000
DC Must Nominal
Nominal Resistance Operate Coil
Voltage in Ohms Voltage Current
± 10%* (mA)
DC 12 120 9.0 100
Coils 24 472 18.0 51
AC 24 72 20.4 115
Coils 120 1,700 102.0 24
240 7,200 204.0 12
732
P&B
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Catalog 1308242
Issued 3-03
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
Our authorized distributors are more likely to stock the following items for immediate delivery.
No items in this series typically are stocked.
KUP93 Sockets
.054 DIA.
(1.37)
.187 TYP.
(4.75)
1.906 MAX.
(48.41) .250
(6.35)
1.531 MAX.
(38.89)
1.406 MAX.
(35.71) 5
6
4
8
9
7
2
31
C1C2
MTG. HOLE
.157 ± .003
(3.99 ± .08)
.218 REF.
(5.54)
2.350
(59.69)
.469 ± .015
(11.91 ± .38)
1.308
(33.22)
1.250
(31.75)
.790
(20.07) .10 0
(2.54)
1.858
(47.19)
.205 DIA.
(5.21)
(2 HOLES)
.710
(18.03)
.465
(11.81)
.276
(7.01)
.338
(8.58)
.062
(1.57)
.097 ± .004
(2.46 ± .10)
DIA. (11) HOLES
1.858
(47.19)
.737
(18.72)
.790
20.07
.395
(10.03)
.317
(8.05)
.161 ± .005
(4.09 ± .13)
DIA. (2) HOLES
Outline Dimensions Wiring Diagrams
3 Form C
Ordering Information
Socket PC Board Layout (Component Side of Board)
KUP93 Socket Number
Socket P C Socket With
Color Terminals
Natural Nylon 27E168**
**UL Recognized, file E22575
Socket: Rated 10 amperes. Will accept .187" (4.75mm)
quick-connect terminals of all KUP93 relays.
Typical Part No. BKUP93 11 A 2 1 -24
1. Type:
KUP93 = Enclosed general purpose relay.
2. Contact Arrangement:
14 = 3 Form C (3PDT)
3. Coil Input:
A = AC D = DC
4. Mounting:
1 = PLAIN CASE;
5. Terminals, Contact Material & Rating:
1 = .187" (4.75mm) quick connect, silver, 5 amps.
3 = .187" (4.75mm) quick connect, silver-cadmium oxide, 10 amps.
6. Coil Voltage:
To 240VAC, 50/60 Hz. or 110VDC.
