US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Surface Mount Wideband RF Transformers
Document 591-1
Document 591-1 Revised 09/01/11
Part 3 dB 2 dB 1 dB
number (MHz) (MHz) (MHz)
PWB-1-AL_ 0.08 – 450 0.13 – 325 0.30 – 190
PWB-1.5-AL_ 0.03 – 300 0.035 – 250 0.06 – 150
PWB-2-AL_ 0.05 – 200 0.06 – 160 0.10 – 100
PWB-4-AL_ 0.15 – 500 0.24 – 300 0.60 – 140
PWB-16-AL_ 0.05 – 80 0.06 – 75 0.11 – 30
PWB1010L_ 0.0035 – 125 0.0045 – 100 0.007 – 80
PWB1010-1L_ 0.03 – 250 0.04 – 225 0.06 – 200
PWB1015L_ 0.07 – 225 0.10 – 200 0.20 – 125
PWB1040L_ 0.15 – 400 0.25 – 350 0.80 – 250
PWB-1-BL_ 0.13 – 425 0.18 – 325 0.32 – 190
PWB-1.5-BL_ 0.50 – 250 0.80 – 175 1.50 – 120
PWB-2-BL_ 0.20 – 400 0.225 – 275 0.50 – 150
PWB-4-BL_ 0.14 – 700 0.20 – 400 0.40 – 150
PWB-16-BL_ 0.075 – 90 0.11 – 75 0.20 – 65
PWB2010L_ 0.0035 – 125 0.0045 – 100 0.007 – 80
PWB2010-1L_ 0.03 – 250 0.04 – 225 0.06 – 200
PWB2040L_ 0.15 – 400 0.25 – 350 0.80 – 250
PWB-1-CL_ 0.10 – 300 0.13 – 200 0.20 – 150
PWB-1.5-CL_ 0.15 – 200 0.225 – 150 0.35 – 100
PWB-2-CL_ 0.13 – 285 0.20 – 175 0.325 – 125
PWB-4-CL_ 0.14 – 500 0.20 – 230 0.40 – 110
PWB3010L_ 0.0035 – 125 0.0045 – 100 0.007 – 80
PWB3010-1L_ 0.03 – 250 0.04 – 225 0.06 – 200
PWB3015L_ 0.07 – 225 0.10 – 200 0.20 – 125
PWB3040L_ 0.15 – 400 0.25 – 350 0.80 – 250
Typical Frequency Response
Core material Ferrite
Terminations RoHS compliant tin-silver-copper over tin over nickel
over phos bronze. Other terminations available at additional cost.
Weight 250 – 270 mg
Ambient temperature –40°C to +85°C
Storage temperature Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
60 per billion hours / 16,666,667 hours, calculated per Telcordia SR-332
Packaging 250/7″reel; 1000/13″ reel Plastic tape: 16 mm wide,
0.35 mm thick, 12 mm pocket spacing, 5.0 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf
• Cost effective surface mount wideband transformers
• 300 V interwinding isolation, 1/4 Watt RF input power
• 250 mA max current rating.
Dimensions are in inches
mm
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 591-2 Revised 09/01/11
Document 591-2
Impedance Insertion
Primary (pins 1-3) Secondary (pins 6-4)
ratio2 Bandwidth Idc loss max L min3 DCR max L min3 DCR max
Type Part number1 pri:sec (MHz) (mA) (dB) (µH) (Ohms) (µH) (Ohms)
PWB-1-AL_ 1:1 0.08 - 450 250 0.60 40 0.070 40 0.070
PWB-1.5-AL_ 1:1.5 0.03 - 300 250 0.35 110 0.080 160 0.110
PWB-2-AL_ 1:2 0.05 - 200 250 0.25 75 0.088 150 0.120
PWB-4-AL_ 1:4 0.15 - 500 250 0.50 25 0.075 98 0.135
PWB-16-AL_ 1:16 0.05 - 80 250 0.35 75 0.260 1250 0.910
PWB1010L_ 1:1 0.0035 - 125 250 0.20 780 0.320 780 0.320
PWB1010-1L_ 1:1 0.03 - 250 250 0.20 95 0.200 95 0.200
PWB1015L_ 1:1.5 0.07 - 225 250 0.40 51 0.130 80 0.145
PWB1040L_ 1:4 0.15 - 400 250 0.40 25 0.115 95 0.160
PWB-1-BL_ 1:1 0.13 - 425 250 0.40 22 0.070 22 0.070
PWB-1.5-BL_ 1:1.5 0.50 - 250 250 0.40 140 0.100 200 0.120
PWB-2-BL_ 1:2 0.20 - 400 250 0.35 75 0.088 150 0.130
PWB-4-BL_ 1:4 0.14 - 700 250 0.50 25 0.075 98 0.135
PWB-16-BL_ 1:16 0.075 - 90 250 0.30 75 0.260 1250 0.910
PWB2010L_ 1:1 0.0035 - 125 250 0.20 780 0.320 780 0.320
PWB2010-1L_ 1:1 0.03 - 250 250 0.20 95 0.200 95 0.200
PWB2040L_ 1:4 0.15 - 400 250 0.40 25 0.115 95 0.160
PWB-1-CL_ 1:1 0.10 - 300 250 0.60 22 0.070 22 0.070
PWB-1.5-CL_ 1:1.5 0.15 - 200 250 0.30 140 0.110 200 0.120
PWB-2-CL_ 1:2 0.13 - 285 250 0.30 75 0.105 150 0.130
PWB-4-CL_ 1:4 0.14 - 500 250 0.50 25 0.075 98 0.135
PWB3010L_ 1:1 0.0035 - 125 250 0.20 780 0.320 780 0.320
PWB3010-1L_ 1:1 0.03 - 250 250 0.20 95 0.200 95 0.200
PWB3015L_ 1:1.5 0.07 - 225 250 0.40 51 0.130 80 0.145
PWB3040L_ 1:4 0.15 - 400 250 0.40 25 0.115 95 0.160
1. When ordering, please specify termination and packaging codes:
PWB-3010-1LD
Termination: L = RoHS compliant tin-silver-copper over tin over nickel over phos bronze.
Special order: S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine ready reel. EIA-481 embossed plastic tape, 250 parts per full reel.
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13″ machine ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1000 parts per full reel).
2. Impedance ratio is for the full primary winding to the full secondary winding.
3. Inductance tested at 130 kHz, 0.1 Vrms, 0 Adc.
4. Electrical specifications at 25°C. Measurements are referenced to 50 Ohms.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Surface Mount Wideband RF Transformers
6
4
3
1
Type A
PriSec
3
16
5
4
Type B
PriSec
6
5
4
3
2
1
Type C
PriSec
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 591-3 Revised 09/01/11
Document 591-3
8
7
6
5
4
3
2
1
-1
0
0.01 0.1 110 100 1000
dBm Attenuation
Frequency (MHz)
8
7
6
5
4
3
2
1
-1
0
0.001 0.01 0.1 110100
dBm Attenuation
Frequency (MHz)
8
7
6
5
4
3
2
1
-1
0
0.01 0.1 110 100 1000
dBm Attenuation
Frequency (MHz)
8
7
6
5
4
3
2
1
-1
0
0.01 0.1 110 100 1000
dBm Attenuation
Frequency (MHz)
8
7
6
5
4
3
2
1
-1
0
0.01 0.1 110 100 1000
dBm Attenuation
Frequency (MHz)
8
7
6
5
4
3
2
1
-1
0
0.01 0.1 110 100 1000
dBm Attenuation
Frequency (MHz)
8
7
6
5
4
3
2
1
-1
0
0.01 0.1 110 100 1000
dBm Attenuation
Frequency (MHz)
8
7
6
5
4
3
2
1
-1
0
0.01 0.1 110 100 1000
dBm Attenuation
Frequency (MHz)
8
7
6
5
4
3
2
1
-1
0
0.01 0.1 110 100 1000
dBm Attenuation
Frequency (MHz)
Type A Transformers
PWB-1-A
3 dB bandwidth 0.08 - 450 MHz
PWB-1.5-A
3 dB bandwidth 0.03 - 300 MHz
PWB-2-A
3 dB bandwidth 0.05 - 200 MHz
PWB-4-A
3 dB bandwidth 0.15 - 500 MHz
PWB-16-A
3 dB bandwidth 0.05 - 80 MHz
PWB1010-1
3 dB bandwidth 0.03 - 250 MHz
PWB1015
3 dB bandwidth 0.07 - 225 MHz
PWB1040
3 dB bandwidth 0.15 - 400 MHz
PWB1010
3 dB bandwidth 0.0035 - 125 MHz
Attenuation measured on a network analyzer (re: 50 Ohms)
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 591-4 Revised 09/01/11
Document 591-4
8
7
6
5
4
3
2
1
-1
0
0.01 0.1 110 100 1000
dBm Attenuation
Frequency (MHz)
8
7
6
5
4
3
2
1
-1
0
0.01 0.1 110 100 1000
dBm Attenuation
Frequency (MHz)
8
7
6
5
4
3
2
1
-1
0
0.01 0.1 110 100 1000
dBm Attenuation
Frequency (MHz)
8
7
6
5
4
3
2
1
-1
0
0.01 0.1 110 100 1000
dBm Attenuation
Frequency (MHz)
8
7
6
5
4
3
2
1
-1
0
0.01 0.1 110 100 1000
dBm Attenuation
Frequency (MHz)
8
7
6
5
4
3
2
1
-1
0
0.01 0.1 110 100 1000
dBm Attenuation
Frequency (MHz)
8
7
6
5
4
3
2
1
-1
0
0.01 0.1 110 100 1000
dBm Attenuation
Frequency (MHz)
8
7
6
5
4
3
2
1
-1
0
0.001 0.01 0.1 110100
dBm Attenuation
Frequency (MHz)
Type B Transformers
PWB-1-B
3 dB bandwidth 0.13 - 425 MHz
PWB-1.5-B
3 dB bandwidth 0.50 - 250 MHz
PWB-2-B
3 dB bandwidth 0.20 - 400 MHz
PWB-4-B
3 dB bandwidth 0.14 - 700 MHz
PWB-16-B
3 dB bandwidth 0.075 - 90 MHz
PWB2010-1
3 dB bandwidth 0.03 - 250 MHz
PWB2040
3 dB bandwidth 0.15 - 400 MHz
PWB2010
3 dB bandwidth 0.0035-125 MHz
Attenuation measured on a network analyzer (re: 50 Ohms)
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 591-5 Revised 09/01/11
Document 591-5
8
7
6
5
4
3
2
1
-1
0
0.01 0.1 110 100 1000
dBm Attenuation
Frequency (MHz)
8
7
6
5
4
3
2
1
-1
0
0.01 0.1 110 100 1000
dBm Attenuation
Frequency (MHz)
8
7
6
5
4
3
2
1
-1
0
0.01 0.1 110 100 1000
dBm Attenuation
Frequency (MHz)
8
7
6
5
4
3
2
1
-1
0
0.01 0.1 110 100 1000
dBm Attenuation
Frequency (MHz)
Type C Transformers
PWB-1-C
3 dB bandwidth 0.10 - 300 MHz
PWB-1.5-C
3 dB bandwidth 0.15 - 200 MHz
PWB-2-C
3 dB bandwidth 0.13 - 285 MHz
PWB-4-C
3 dB bandwidth 0.14 - 50 MHz
PWB3010
3 dB bandwidth .0035-125 MHz
PWB3010-1
3 dB bandwidth .03 - 250 MHz
PWB3015
3 dB bandwidth .07 - 225 MHz
PWB3040
3 dB bandwidth .15 - 400 MHz
8
7
6
5
4
3
2
1
-1
0
0.01 0.1 110 100 1000
dBm Attenuation
Frequency (MHz)
8
7
6
5
4
3
2
1
-1
0
0.01 0.1 110 100 1000
dBm Attenuation
Frequency (MHz)
8
7
6
5
4
3
2
1
-1
0
0.01 0.1 110 100 1000
dBm Attenuation
Frequency (MHz)
8
7
6
5
4
3
2
1
-1
0
0.001 0.01 0.1 110100
dBm Attenuation
Frequency (MHz)
PWB3010-1
3 dB bandwidth 0.03 - 250 MHz
PWB3015
3 dB bandwidth 0.07 - 225 MHz
PWB3040
3 dB bandwidth 0.15 - 400 MHz
PWB3010
3 dB bandwidth 0.0035 - 125 MHz
Attenuation measured on a network analyzer (re: 50 Ohms)