European PowerSemiconductor and Electronics Company Marketing Information T 588 N T 589 N o36 o30 C C A A o30 o3,5 x 2 deep on both sides o36 HK plug 2,8 x 0,8 2 G plug 2,8 x 0,8 3,5+0,1 x 3,5 deep on both sides HK plug 4,8 x 0,8 G plug 2,8 x 0,8 4 VWK Aug. 1996 T 588 N T 589 N Elektrische Eigenschaften Hochstzulassige Werte Electrical properties Maximum rated values Periodische Vorwarts- und RuckwartsSpitzensperrspannung repetitive peak forward off-state and reverse voltages tvj = -40C...t vj max VDRM , VRRM 600 800 1000 1200 1400 1600 1800* V Vorwarts-Stospitzensperrspannung non-repetitive peak forward off-state voltage tvj = -40C...t vj max VDSM = VDRM 600 800 1000 1200 1400 1600 1800* V Ruckwarts-Stospitzensperrspannung non-repetitive peak reverse voltage tvj = +25C...t vj max VRSM = VRRM 700 900 1100 1300 1500 1700 1900 V Durchlastrom-Grenzeffektivwert RMS on-state current ITRMSM 1250 A Dauergrenzstrom average on-state current ITAVM 588 A 795 A tc = 85C tc = 61C Stostrom-Grenzwert surge current tvj = 25C, t p = 10 ms ITSM tvj = tvj max , tp = 10 ms Grenzlastintegral I2 t-value tvj = 25C, t p = 10 ms I2 t tvj = tvj max , tp = 10 ms Kritische Stromsteilheit critical rate of rise of on-state current Kritische Spannungssteilheit critical rate of rise of off-state voltage 9400 A 8000 A 442000 A 2s 320000 (diT/dt)cr 200 A 2s A/s tvj = tvj max , vD = 67% V DRM (dv/dt)cr 1000 V/s max. 2,15 V vD 67%, v DRM , f = 50 Hz vL = 10 V, i GM= 1 A, di G/dt = 1 A/s Charakteristische Werte Characteristic values Durchlaspannung on-state voltage tvj = tvj max , iT = 2400 A vT Schleusenspannung threshold voltage tvj = tvj max VT(TO) 0,8 V Ersatzwiderstand slope resistance tvj = tvj max rT 0,5 m Zundstrom gate trigger current tvj = 25 C, v D = 6 V IGT max. 250 mA Zundspannung gate trigger voltage tvj = 25 C, v D = 6 V VGT max. 2,2 V Nicht zundender Steuerstrom gate non-trigger current tvj = tvj max , vD = 6 V IGD max. 10 mA Nicht zundende Steuerspannung gate non-trigger voltage tvj = tvj max , vD = 0,5 V DRM VGD max. 0,25 V Haltestrom holding current tvj = 25 C, v D = 6 V, R A = 5 IH max. 300 mA Einraststrom latching current tvj = 25 C,v D = 6 V, R GK 10 IL max. 1,2 A iGM = 1 A, di G /dt = 1 A/s, t g = 20 s Vorwarts- und Ruckwarts-Sperrstrom forward off-state and reverse currents tvj = tvj max, vD = VDRM , vR = VRRM i D, i R max. 50 mA Zundverzug gate controlled delay time tvj=25C, i GM = 1 A, di G/dt = 1 A/s tgd max. 4 s Freiwerdezeit circuit commutated turn-off time siehe Techn.Erl./see Techn. Inf. tq typ. 250 s =180 el, sin RthJC max. 0,045 C/W max. 0,041 C/W max. 0,074 C/W max. 0,07 C/W max. 0,104 C/W max. 0,1 C/W max. 0,007 C/W max. 0,014 C/W 125 C Thermische Eigenschaften Thermal properties Innerer Warmewiderstand fur beidseitige Kuhlung thermal resistance, junction to case for two-sided cooling fur anodenseitige Kuhlung for anode-sided cooling DC =180 el, sin RthJC(A) DC fur kathodenseitige Kuhlung for cathode-sided cooling =180 el, sin RthJC(K) DC Ubergangs-Warmewiderstand thermal resistance, case to heatsink beidseitig/two-sided RthCK einseitig/one-sided Hochstzul.Sperrschichttemperatur max. junction temperature tvj max Betriebstemperatur operating temperature tc op -40...+125 C Lagertemperatur storage temperature tstg -40...+140 C F 6...12 kN G typ. 100/270 g 17/28 mm 50 m/s Mechanische Eigenschaften Mechanical properties Si-Elemente mit Druckkontakt Si-pellet with pressure contact Anprekraft clamping force Gewicht weight T 588 N/T 589 N Kriechstrecke creepage distance T 588 N/T 589 N Feuchteklasse humidity classification DIN 40040 Schwingfestigkeit vibration resistance f = 50 Hz Mabild, anliegend outline, attached DIN 41814-152 A4/-153C4 * Fur groere Stuckzahlen Liefertermin erfragen / Delivery for larger quantities on request C T 588 N, T 589 N 3,5 1600 180 3,0 0 iT [kA] 120 90 1200 PTAV [W ] 60 = 30 2 ,0 800 1 ,5 1 ,0 400 0 ,5 1 0 2 3 v T [ V] T 588 N / 1 0 200 600 400 800 I TAV [A ] T 588 N / 2 Bild / Fig. 1 Gre nzd urchlakennlin ie / Limitin g o n-state ch aracte ristic iT = f( vT), tvj = tvj max 1000 Bild / Fig. 2 Durchlave rlustle istung / O n-state power loss PTAV = f(ITAV) Para me ter : Stromfluwinkel / Curren t co nducti on angle 12 0 120 0 0 tC [C ] tC [C ] 80 80 60 60 40 40 20 0 = 30 60 2 00 90 400 120 600 180 80 0 I TAVM [ A] T 588 N / 3 20 100 0 = 30 0 20 0 60 90 400 120 600 800 I TAVM [ A] T 588 N / 4 Bild / Fig. 3 Hochstzulassige Geha use tempe ratur / Ma x. a llowable case tempera tur e t C = f(I TAVM) Bei dse itig e K uhlun g / Two -si ded co oling Par amete r: Stromflu winkel / Curren t conduction angle 180 1000 Bild / Fig. 4 Hoch stzulassi ge Gehau setemper atu r / Max. al lowable case temperature tC = f(ITAVM) Ano denseitige Kuhlu ng / Anod e-sided cooling Para me ter : Stromfluwinkel / Curren t co nducti on angle 12 0 120 0 0 tA [C ] tA [C ] 80 80 60 60 40 40 20 0 T 588 N / 5 = 30 40 80 120 60 160 90 120 200 I TAVM [A ] Bild / Fig. 5 Hoch stzulassige Ku hlmitteltemperatur / Max. a llowab le cooling mediu m temperatur tA = f(I TAVM) Luftsel bstkuhlun g / Na tura l ai r-co oling Kuh lko rper / Heatsi nk: K0.36S Par amete r: Stromflu winkel / Curren t conduction angle 180 240 20 = 30 0 T 588 N / 6 10 0 200 60 90 300 120 180 400 I TAVM [ A] Bild / Fig. 6 Hochstzulassig e Kuhlmitteltemperatu r / Max. allo wable cooling medium te mp eratur tA = f(I TAVM) Verstar kte Luftkuhlu ng / Fo rce d a ir cool ing Kuh lkor per / Heatsin k: K 0.1 2F, VL = 50 l/s Para me ter : Stromfluwinkel / Curren t co nducti on angle 500 T 588 N, T 589 N 200 0 0 160 0 120 DC PTAV [W ] 90 60 120 0 0 tC [C ] 180 120 = 30 80 80 0 60 40 0 40 0 0 2 50 500 750 1000 I TAV [A] T 588 N / 7 = 30 20 0 125 0 60 90 120 180 500 DC 10 00 T 588 N / 8 Bild / Fig. 7 Durchlaverlustl eistun g / O n-sta te power loss PTAV = f(ITAV ) Par amete r: Stromflu winkel / Curren t conduction angle 1 500 I TAVM [ A] Bild / Fig. 8 Hoch stzulassi ge Gehau setemper atu r / Max. al lowable case temperature tC = f(ITAVM) Beid sei tige Ku hlung / Two- sid ed coo ling Para me ter : Stromfluwinkel / Curren t co nducti on angle 12 0 120 0 0 tA [C ] tC [C ] 80 80 60 60 40 40 20 0 = 30 200 60 400 90 120 600 180 8 00 T 588 N / 9 DC 1000 I TAVM [ A] = 30 20 0 120 0 60 100 90 120 DC 3 00 ITAVM [A] T 588 N / 10 Bild / Fig. 9 Hochstzulassige Geha use tempe ratur / Ma x. a llowable case tempera tur e t C = f(I TAVM) Ano denseitige Kuh lung / Ano de-sided coolin g Par amete r: Stromflu winkel / Curren t conduction angle 180 20 0 Bild / Fig. 1 0 Hochstzulassig e Kuhlmitteltemperatu r / Max. allo wable cooling medium te mp eratur tA = f(I TAVM) Luftselb stkuhlung / Natural air -co oling Kuh lkor per / Heatsin k: K 0.3 6S Para me ter : Stromfluwinkel / Curren t co nducti on angle 10 12 0 0 6 ITAV(vor) = 0 tA [C ] 60 A 100 A IT(OV) [kA] 130 A 150 A 80 2 170 A 60 1 40 0,7 20 0 T 588 N / 11 = 30 200 60 90 120 4 00 180 I TAVM [ A] Bild / Fig. 11 Hoch stzulassige Ku hlmitteltemperatur / Max. a llowab le cooling mediu m temperatur tA = f(I TAVM) Versta rkte Luftkuhlu ng / Forced air coo ling Kuh lko rper / Heatsi nk: K0.12F, VL = 50 l/s Par amete r: Stromflu winkel / Curren t conduction angle DC 6 00 0,5 10 20 40 T 588 N / 12 1 00 200 400 ms 1 2 4 10 20 40 1 s Bild / Fig. 1 2 Uberstro m / O ver load on-state curren t IT(OV) = f(t) Luftselb stkuhlung / Natural air -co oling tA = 45C Kuh lkor per / Heatsin k: K 0.3 6S Para me ter: Vo rlaststrom / P re-load curre nt ITAV(vor) 2 4 10 20 40 1h 2h min t T 588 N, T 589 N 10 2000 20s 8 ITINT 1s 1min [A] ITAV (vor) =0 4 200 A 280 A 800 1 10 20 40 1 00 200 400 T 588 N / 13 1 ms 2 4 10 20 40 1 2 s 4 200 0 ITAV(vor ) = 20s 4s SD 10min 0,5 1 2 I TAV(vor) 0 10 20 50 100 ED [% ] 5 40 0 800 1200 160 0 2 000 I TINT [A ] 10 170A 150A 130A 100A 60A 0 8 IT(OV)M 0,4s 1min [kA] 6 SD = 0,1s 4min 80 0 a K 0,12 F tA =35 C,VL=50 I/s 4 2h 40 0 SD 40min 0,5 1 2 T 588 N / 15 b 2 10min ITAV(vor) 0 0 ,1 0,2 ITINT Bild / Fig. 1 4 Hoch stzulassi ger Du rch lastrom bei Ausse tzbetrieb / Max. allo wa ble on-state curre nt at in termittent ope ration ITINT = f(E D) Luftselb stkuhlung / Natural air -co oling, t A = 45 C Kuh lkor per / Heatsin k: K 0.3 6S Para me ter: Spie ldauer / Cycl e d uration SD Vorlaststrom / Pre-lo ad cur rent I TAV(vor) ITA V(vor) =0 0 10 20 50 100 E D [%] 5 4 00 800 K 0,36 S tA=45 C ITINT 1200 16 00 I TINT [A] 2000 0 10 20 40 60 T 588 N / 16 Bild / Fig. 15 Hochstzulassiger Durchlastrom bei Aussetzbetrieb / Max. al lowable on- state curre nt at i nte rmittent op eration ITINT = f( ED) Versta rkte Luftkuhlu ng / Forced air-cooling , tA = 35 C Kuh lko rper / Heatsi nk: K0.12F, VL = 50 l/s Par amete r: Spi eldaue r / Cycle d uration SD Vorlaststrom / Pre-l oad cu rrent I TAV(vor) 20 1000 100 ms 200 400 600 1 2 s 4 6 10 t Bild / Fig. 1 6 Gren zstrom / Max. overl oad on-state curren t IT(OV)M = f(t), v RM = 0,8 V RRM Beid sei tige Ku hlung / Two- sid ed coo ling Kuh lkor per / Heatsin k: K 0.3 6S, K 0.12 F Bela stung aus / Surg e curr ent occurs: a - Leer lauf / No-l oad co nditions b - Betrieb mit Dauer grenzstro m / During op eration at max. averag e o n-state current ITAVM 400 10 vG [V ] 40min T 588 N / 14 t 1s 160 0 2h 0 0,1 0,2 10 20 40 1 h 2h min Bild / Fig. 13 Uberstrom / O ve rload on-state curre nt I T(OV) = f(t) Versta rkte Luftkuhlu ng / Forced air-cooling , tA = 35 C Kuh lko rper / Heatsi nk: K0.12F, VL = 50 l/s Par amete r: Vorlaststrom / Pre-lo ad cur rent I TAV(vor) [A ] SD = 0,1s 360 A 400 ITINT 0,4s 4min 330 A 2 4s 1600 6 ITAV(vor) = 0 IT(OV) 120 A [kA] ITAV(vor ) = 170 A 150 A 130 A 100 A 60 A 0 6 b 200 c tgd 100 [s] 40 a 4 20 10 2 4 1 2 1 0,6 max typ 0,4 0,4 0,2 0,2 10 20 T 588 N / 17 40 60 10 0 mA 200 400 600 1 2 A iG 4 6 Bild / Fig. 17 Steuer cha rakter istik mit Zund bereichen / G ate chara cteristic with triggin g are as v G = f(iG ), VD = 6 V Par amete --- -----r: ----- ----- ----- ----- ----- ----- -----a-----b-----c ----- Steuer imp ulsdauer / trigge r pu ls dur atio n t g [ms] 10 1 0 ,5 --- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- Hochstzulassige Spitzensteu erverlustl eistung / Max. rated peak gate p ower d issipa tion [W] 20 40 6 0 --- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 10 0,1 10 -1 2 4 6 100 2 4 6 1 01 T 588 N / 18 Bild / Fig. 1 8 Zundverzug / Gate controlled dela y time t gd = f(iGM ) tvj = 25 C, diG/dt = iGM /1s a - Ma ximale r Verla uf / Limiting characteristic b - Typ ischer Verla uf / Typical characteristic 2 iGM [A ] 4 6 10 2 T 588 N, T 589 N 104 0,10 8 6 Qr [As ] 4 iTM = 1000 A 500 A 200 A 100 A 50 A 2 103 8 0,08 0 ZthJC [C/W ] 0,06 20 A 0,04 6 = 30 4 2 102 60 90 120 180 0,02 2 1 4 6 8 20 10 40 60 -di/dt [ A/s] T 588N / 19 0 10-3 2 80 100 4 6 10 -2 2 4 6 10-1 2 4 6 100 T 588 N / 20 Bild / Fig. 19 Spe rrverzogerun gsladung / Recovered charg e Q r = f(di/d t) t vj = t vj max, v R = 0,5 VRRM , v RM = 0,8 VRRM Par amete r: Durchlastrom / On-state curre nt iTM 2 4 6 t [s ] 101 Bi ld / Fig . 20 Transienter inner er War me wid erstan d / Transient ther mal imped ance Z thJC = f(t) Be idseitige Kuhlu ng / Two-sided cooling Pa rameter: Stromfluwin kel / curre nt conduction angle 0,10 0 ,12 0,08 0 ZthJC [C/W ] ZthJC [C/W ] 0,06 0 0 ,08 30 0 ,06 60 0 ,04 0,04 90 120 180 0,02 = 30 60 90 120 180 0 ,02 DC 0 10-3 2 4 6 1 0-2 2 4 6 10-1 2 4 T 588 N / 21 6 100 2 4 t [s] 6 101 0 10-3 2 4 6 1 0-2 2 4 6 1 0-1 2 4 6 100 2 4 6 101 Bild / Fig. 21 Tr ansienter innere r Warmewide rstand / Tra nsient thermal impeda nce Z thJC = f( t) Bei dse itig e K uhlun g / Two -si ded co oling Par amete r: Stromflu winkel / curren t co nduction angle 2 4 6 10 2 t [s ] T 588 N / 22 Bild / Fig. 2 2 Tra nsi enter in nerer Warmewider stand / Tra nsie nt thermal impedan ce Z thJC = f(t) Ano denseitige Kuhlu ng / Anod e-sided cooling Para me ter : Stromfluwinkel / current co nductio n a ngle Analytische Ele me nte de s tr ansienten Wa rmewidersta ndes Z thJC pro Zweig fu r DC Analytica l el ements of transient the rma l impe dance ZthJC p er arm for DC 0,1 2 0 Beidseitig / Two-sided ZthJC [C/W ] Pos. n 0,0 8 1 2 3 4 R thn [C/W] 0,00043 0 ,00 557 0,019 0 ,01 6 n [s] 0,00027 0 ,00 221 0,085 0 ,36 5 Anode nseiti g / A node -sid ed 0,0 6 Pos. n = 30 0,0 4 60 90 120 180 0,0 2 0 10-3 2 T 588 N / 23 2 3 4 5 0,00034 0,005 41 0,00486 0,023 4 0,036 n [s] 0,00024 0,002 1 0,0376 0,158 2,47 Kathoden se itig / Cathode -sid ed Pos. n DC 4 6 1 0-2 2 1 R thn [C/W] 4 6 10-1 2 4 6 10 0 2 4 6 101 2 t [s] B ild / Fi g. 23 Transienter inne rer Wa rmewi dersta nd / Transient the rma l impe dance Z thJC = f(t) A noden se itige K uhlung / A node- side d coo ling P arameter: Stromfluwi nke l / curr ent condu ction ang le 4 6 1 02 R thn [C/W] n [s] 3 4 5 0,00026 1 0,005 24 2 0,0132 0,034 6 0,0468 0,00019 0,001 92 0,0562 0,65 2,91 Analytische Funktio n / Analytical functio n: nmax ZthJC = n=1 t R thn (1-e n )