2W005G thru 2W10G
Document Number 88528
08-Jul-05
Vishay General Semiconductor
www.vishay.com
1
~
~
Case Style WOG
Glass Passivated Single-Phase Bridge Rectifier
Major Ratings and Characteristics
IF(AV) 2.0 A
VRRM 50 V to 1000 V
IFSM 60 A
IR5.0 µA
VF1.1 V
Tj max. 150 °C
Features
• UL Recognition, file number E54214
• Ideal for printed circuit boards
• Typical IR less than 0.5 µA
• High case dielectric strength
• High surge current capability
• Solder Dip 260 °C, 40 seconds
Typical Applications
General purpose use in ac-to-dc bridge full wave rec-
tification for Power Supply, Adapter, Charger, lighting
Ballaster on Consumers and Home Appliances appli-
cations
Mechanical Data
Case: WOG
Epoxy meets UL-94V-0 Flammability rating
Terminals: Silver plated (E4 Suffix) leads, solderable
per J-STD-002B and JESD22-B102D
Polarity: As marked on body
Maximum Ratings
Ratings at 25 °C ambient temperature unless otherwise specified.
Parameter Symbols 2W005G 2W01G 2W02G 2W04G 2W06G 2W08G 2W10G Units
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V
Maximum average forward rectified current at
0.375" (9.5 mm) lead length (See Fig. 1)
IF(AV) 2.0 A
Peak forward surge current single sine-wave
superimposed on rated load
IFSM 60 A
Rating for fusing (t < 8.3 ms) I2t 15 A2sec
Operating junction and storage temperature
range
TJ, TSTG - 55 to + 150 °C
www.vishay.com
2
Document Number 88528
08-Jul-05
2W005G thru 2W10G
Vishay General Semiconductor
Electrical Characteristics
Ratings at 25 °C ambient temperature unless otherwise specified.
Thermal Characteristics
Ratings at 25 °C ambient temperature unless otherwise specified.
Notes:
(1) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5 mm) lead length P.C.B. mounting
Ratings and Characteristics Curves
(TA = 25 °C unless otherwise noted)
Parameter Test condition Symbols 2W005G 2W01G 2W02G 2W04G 2W06G 2W08G 2W10G Units
Maximum instantaneous
forward voltage drop per leg
at 2.0 A VF 1.1 V
Maximum DC reverse current
at rated DC blocking voltage
per leg
TA = 25 °C
TA = 125 °C
IR 5.0
500
µA
Typical junction capacitance
per leg
at 4.0 V,
1 MHz
CJ 40 20 pF
Parameter Symbols 2W005G 2W01G 2W02G 2W04G 2W06G 2W08G 2W10G Units
Typical thermal resistance per leg (1) RθJA
RθJL
40
15
°C/W
Figure 1. Derating Curve Output Rectified Current
Figure 2. Maximum Non-Repetitive Peak Forward Surge Current
Per Leg
Ambient Temperature (°C)
Average Forward Output Current (A)
025 50 75 100 125 150
0
0.4
0.8
1.2
1.6
2.0
2.4
P.C.B.
0.375"
(9.5 mm)
Copper Pads
0.22 x 0.22"
(5.5 x 5.5 mm)
Capacitive Load
5.0
10
20
=
I(pk)
I(AV)
60 HZ
Resistive or
Inductive Load
(Per Leg)
Number of Cycles at 60 HZ
Peak Forward Surge Current (A)
0
10
20
40
50
60
30
100
10
1
1.0 Cycle
T
A
=25°C
Single Sine-Wave
Figure 3. Typical Forward Characteristics Per Leg
Figure 4. Typical Reverse Leakage Characteristics Per Leg
Instantaneous Forward Voltage (V)
Instantaneous Forward Current (A)
0.4 0.6 0.8 1.0 1.2 1.4 1.6
0.01
0.1
1
10
20
TJ=25°C
Pulse Width = 300 µs
1% Duty Cycle
Percent of Rated Peak Reverse Voltage (%)
Instantaneous Reverse Current (µΑ)
020 40 60 80 100
0.01
0.1
1
10
100
TJ= 100°C
TJ=25°C
TJ= 125°C
2W005G thru 2W10G
Document Number 88528
08-Jul-05
Vishay General Semiconductor
www.vishay.com
3
Package outline dimensions in inches (millimeters)
Figure 5. Typical Junction Capacitance Per Leg
Reverse Voltage (V)
Junction Capacitance (pF)
100
0.1 110
1
10
100
TJ=25 °C
f = 1.0 MHZ
Vsig = 50mVp-p
Figure 6. Typical Transient Thermal Impedance
t, Heating Time (sec.)
Transient Thermal Impedance (°C/W)
100
0.01 0.1 110 100
0.1
1
10
0.220 (5.6)
0.160 (4.1)
0.388 (9.86)
0.348 (8.84)
0.032 (0.81)
0.028 (0.71)
1.0
(25.4)
MIN.
0.060 (1.52)
0.020 (0.51)
0.348 (8.84)
0.308 (7.82)
0.220 (5.6)
0.180 (4.6)
0.220 (5.6)
0.180 (4.6)
Case Style WOG
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
