Telefon: +49 (0) 6135 931069
Telefax: +49 (0) 6135 931070
www.peak-electronics.de
info@peak-electronics.de
MD SERIES PEN6-XXXXZ4:1 1.5 KV ISOLATED 5 - 6 W REGULATED DUAL OUTPUT DIP24
Other specifications please enquire.
Electrical Specifications
(Typical at + 25° C, nominal input voltage, rated output current unless otherwise specified)
Input Specifications
Voltage range 9 - 36 VDC (24 VDC), 18 – 72 VDC (48 VDC)
Filter Pi Network
Isolation Specifications
Rated voltage 1500 Vdc
Resistance 109 Ohm
Capacitance 390 pF typ.
Output Specifications
Voltage accuracy +/- 1 % typ. +/-2% max.
Ripple and noise (at 20 MHz BW) 75 mV p-p max.
Short circuit protection Continuous , restart automatic
Line voltage regulation +/- 0,5 % max.
Load voltage regulation +/- 0,5 % max.
Temperature coefficient +/- 0,02 % / °C
General Specifications
Efficiency 80 % typ.
Switching frequency 260 KHz typ.
Environmental Specifications
Operating temperature (ambient) -40°C to +85°C
Storage temperature - 55 °C to + 125 °C
Derating See graph
Humidity Up to 90 %, non condensing
Cooling Free air convection
Physical Characteristics
Dimensions 31,75 x 20,32 x 10,16 mm
1,25 x 0,80 x 0,40 inches
Weight 19,0 g
Case material Nickel Coated Copper
Examples of Partnumbers/Modelcode
PART
NO.
INPUT
VOLTAGE
(VDC)
Nominal
INPUT
CURRENT
NO LOAD
INPUT
CURRENT
FULL
LOAD
OUTPUT
VOLTAGE
(VDC)
OUTPUT
CURRENT
(max. mA)
EFFICIENCY FULL LOAD
(% TYP.)
PEN6-2405Z4:1 9 - 36 15 260 +/- 5 +/- 500 80
PEN6-2412Z4:1 9 - 36 15 309 +/- 12 +/- 250 81
PEN6-2415Z4:1 9 - 36 20 309 +/- 15 +/- 200 81
PEN6-4805Z4:1 18 - 72 15 131 +/- 5 +/- 500 80
PEN6-4812Z4:1 18 - 72 15 155 +/- 12 +/- 250 81
PEN6-4815Z4:1 18 - 72 15 155 +/- 15 +/- 200 81