PicoScope 2205 MSO (R) USB-POWERED MIXED SIGNAL OSCILLOSCOPE Think logically... 2 ANALOG CHANNELS * 16 DIGITAL CHANNELS * AWG 25 MHz analog bandwidth 100 MHz max. digital input frequency 200 MS/s mixed signal sampling Advanced digital triggers SDK and example programs YE AR 2+16 CHANNEL MSO Supplied with a full SDK including example programs * Software compatible with Windows XP, Windows Vista, Windows 7 and 8 * Free Technical Support ...from a name you can trust PicoScope 2205 MSO PicoScope 2205 MSO Introduction Selecting digital channels, or groups The PicoScope 2205 MSO from Pico Technology is a 2+16 channel, 8-bit resolution oscilloscope. This means that along with 2 analog channels, the PicoScope 2205 MSO also has 16 digital inputs, so you can view your digital and analog signals simultaneously. Selecting the digital channels in the software couldn't be easier. Just open the user interface ( ), and then drag and drop to add the channels you want to see. These channels can be arranged into any order, grouped, renamed, and even temporarily disabled if required. Full-featured oscilloscope ANALO G DIGITA L The PicoScope 2205 MSO is a full-featured oscilloscope. A function generator and arbitrary waveform generator are built-in and include a sweep function. It also offers mask limit testing, math and reference channels, advanced digital triggering, serial decoding, automatic measurements and color persistence display. Triggering The PicoScope 2205 MSO offers a comprehensive set of advanced digital triggers including: pulse width, windowed and dropout triggers to help you capture the data you need. Digital triggering reduces timing errors and allows our oscilloscopes to trigger on the smallest signals, even at the full bandwidth. Trigger levels and hysteresis can be set with high resolution. Digital triggering reduces rearm delay and, combined with the segmented memory, allows the triggering and capture of events that happen in rapid sequence. The mask limit testing function can then scan through these waveforms to highlight failed waveforms for viewing in the waveform buffer. Arbitrary waveform and function generator The unit has a built-in signal generator (sine, square, triangle, DC level). As well as basic controls to set level, offset and frequency, more advanced controls allow you to sweep over a range of frequencies. Also included is a fully programmable arbitrary waveform generator with a 8 ksample buffer. Our commitment The 16 digital inputs can be displayed individually or in arbitrary groups labelled with binary, decimal or hexadecimal values. A separate logic threshold from -5 V to +5 V can be defined for each 8-bit input port. The digital trigger can be activated by any bit pattern combined with an optional transition on any single input. Advanced logic triggers can be set on either the analog or digital input channels, or both. To protect your investment, both the API and the firmware inside the unit can be updated. We have a long history of providing new features for free via our software downloads. Other companies make vague promises about future enhancements but we deliver on our promise of free updates, year after year. Users of our products reward us by becoming lifelong customers, frequently recommending us to their colleagues. www.picotech.com PicoScope 2205 MSO specifications VERTICAL (Analog) Number of channels Input connectors Bandwidth (-3 dB) 14 ns Resolution 8 bits AC/DC Input sensitivity Input ranges DC accuracy 10 mV/div to 4 V/div (10 vertical divisions) 50 mV, 100 mV, 200 mV, 500 mV, 1 V, 2 V, 5 V, 10 V, 20 V 3 % of full scale Noise count Number of channels Input connectors Maximum input frequency Input impedance (with TA136 cable) 3 counts 100 V (DC + AC peak) 16 2.54 mm, 10 x 2 way connector 100 MHz 200 k 2 % 8 pF 2 pF Digital threshold range 5 V Input dynamic range 20 V Overvoltage protection 50 V Threshold grouping Two independent threshold controls - Port 0: D7-D0 and Port 1: D15-D8 Threshold selection TTL, CMOS, ECL, PECL, User Defined Threshold accuracy 100 mV Minimum input voltage swing 500 mV Channel-to-channel skew Minimum input slew rate Max. sampling rate Ch A / Ch A + 1 digital port: 1 or 2 digital ports: All other combinations: Maximum equivalent sampling rate (repetitive signals) Maximum sampling rate (continuous USB streaming) Buffer memory Buffer memory (continuous streaming) Waveform buffer: PicoScope software PicoScope software (rapid trigger mode) SDK SDK (user's software) Timebase ranges Timebase accuracy Sampling jitter DYNAMIC PERFORMANCE (typical) 1 M 1 % 14 pF 2 pF Input coupling Overvoltage protection HORIZONTAL 25 MHz Rise time Input impedance VERTICAL (Digital) 2 BNC Crosstalk < 5 ns 10 V/s 200 MS/s 200 MS/s 100 MS/s 4 GS/s 1 MS/s on all scope channels and digital ports in PicoScope 6 (4 MS/s total) > 20 MS/s using supplied SDK (PC-dependent) 48 kS shared between active channels and ports 20 MS in PicoScope software. Up to available PC memory when using supplied SDK 10,000 software segments 32 hardware segments 32 hardware segments Unlimited Real-time: 50 ns/div to 5000 s/div. ETS* mode: 2 ns/div to 5000 s/div. 100 ppm < 300 ps RMS > 200:1 up to full bandwidth for equal voltage ranges Harmonic distortion < -55 dB @ 100 kHz full scale input SFDR > 55 dB @ 100 kHz full scale input Noise 3 counts (all ranges) Linearity Pulse response Bandwidth flatness * (ETS is available on analog channels only) 1 LSB < 7% overshoot -3 dB, +0.3 dB from DC to full bandwidth Specifications continued... TRIGGER (Main features) Trigger modes 100% of capture size Max. post-trigger delay 4 billion samples Trigger rearm time Max. trigger rate TRIGGER (Analog) TRIGGER (Digital) Source Ch A, Ch B Rising, falling Advanced triggers Edge, Window, Pulse width, Window pulse width, Dropout, Window dropout, Interval, Runt pulse, Logic Trigger sensitivity Digital triggering provides 1 LSB accuracy up to full bandwidth of scope. ETS mode: Typical 10 mV p-p, at full bandwidth Source Trigger types TRIGGER (Logic) Source FUNCTION GENERATOR/ ARBITRARY WAVEFORM GENERATOR Connector Trigger types Standard waveforms Standard signal frequency Sweep modes Output frequency resolution Output voltage range Output voltage adjustment Amplitude flatness DC accuracy SFDR Output resistance MASK LIMIT TESTING DISPLAY Ch A, Ch B, and D15 to D0 Logic trigger across analog and digital inputs (using AND, NAND, OR, NOR, XOR, XNOR) Rear panel, BNC Sine, square, triangle, DC voltage, ramp, sinc, gaussian, half-sine, white noise DC to 100 kHz Up, down, dual with selectable start / stop frequencies and increments < 0.01 Hz 2 V Signal amplitude and offset adjustable in 1 mV steps within overall 2 V range < 1 dB to 100 kHz 1 % of full scale > 55 dB @ 1 kHz, full scale sine wave 600 10 V 2 MS/s AWG buffer size 8 ksamples AWG resolution 12 bits AWG bandwidth 100 kHz AWG rise time (10-90 %) < 2 s Buffer index mode Repeat Phase accumulator 32 bits Pk-pk output range 250 mV to 2 V Frequency range Display modes Number of FFT points SERIAL DECODING Combined Level and Edge Data pattern (can be grouped by user) AWG update rate Windowing functions AUTOMATIC MEASUREMENTS D15 to D0 Overvoltage protection Arbitrary Waveform MATH CHANNELS < 2 s on fastest time base 32 waveforms in a 100 s burst Trigger types Advanced triggers SPECTRUM ANALYZER None, Auto, Repeat, Single, Rapid (segmented memory) Max. pre-trigger capture Downloadable user defined waveforms. 1 sample to 8 ksamples (user-selectable) DC to 25 MHz Magnitude, average, peak hold Rectangular, Gaussian, triangular, Blackman, Blackman-Harris, Hamming, Hann, flat-top Selectable from 128 to half available buffer memory in powers of 2 Functions +, -, *, /, sqrt, ^, exp, ln, log, abs, norm, sign, sin, cos, tan, asin, acos, atan, sinh, cosh, tanh, derivative, integral, freq, min, max, average, peak Operands A, B (input channels), T (time), reference waveforms, constants, pi Oscilloscope AC RMS, true RMS, DC average, cycle time, frequency, duty cycle, falling rate, fall time, rising rate, rise time, high pulse width, low pulse width, maximum, minimum, peak to peak Spectrum Frequency at peak, amplitude at peak, average amplitude at peak, total power, THD %, THD dB, THD plus noise, SFDR, SINAD, SNR, IMD Statistics Minimum, maximum, average and standard deviation Protocols IC, I2S, SPI, RS-232/UART, CAN, LIN, FlexRay Statistics Pass/fail, failure count, total count Interpolation Persistence modes Linear Digital color, analog intensity, custom, or none Specifications continued... GENERAL PC connectivity USB 2.0 hi-speed Dimensions 200 x 140 x 40 mm (including connectors) Weight < 0.5 kg Power requirements Powered from USB port Operating: Temperature range Humidity range 0 C to 50 C (20 C to 30 C for stated accuracy) 5% to 80% RH, non-condensing Storage: Temperature range Humidity range -20 C to +60 C 5% to 95% RH, non-condensing Safety approvals Designed to EN 61010-1:2010 EMC approvals CE: Tested to EN61326-1:2006. FCC: Tested to part 15 subpart B Environmental approvals RoHS and WEEE compliant PicoScope 6, SDK and example programs. Microsoft Windows XP, Windows Vista, Windows 7 or 8 (32-bit or 64-bit). Software/PC requirements Languages (software and manuals) English, French, German, Italian, Spanish Chinese (Simplified), Chinese (Traditional), Czech, Danish, Dutch, Finnish, Greek, Hungarian, Japanese, Norwegian, Polish, Portuguese, Romanian, Russian, Swedish, Turkish Languages (software only) Product packs and accessories Product Packs The following Product Packs are available for the PicoScope 2205 MSO: PP798 PP823 * * * * * * * * * * * * PicoScope 2205 MSO TA136 digital cable 2 x TA139 pack of 10 test clips 2 x MI007 probes PicoScope probe pouch Software and Reference CD Quick Start Guide USB cable PicoScope 2205 MSO Software and Reference CD Quick Start Guide USB cable Accessories The following accessories for the PicoScope 2205 MSO are also available separately: PP787 TA136 * * * 2 x MI007 probes PicoScope probe pouch TA139 * Pack of 10 test clips 20-way 25 cm digital cable PicoScope 2205 MSO connections Arbitrary waveform generator and function generator USB Ch A 20-way digital connector Ch B The front panel of the PicoScope 2205 MSO has two BNC analog input channels and a 20-way connector with 16 digital inputs. The rear panel of the PicoScope 2205 MSO has two connections: a USB port for connection to the PC, and a BNC for the AWG/function generator connection. Have you seen our PicoScope 2000 Series data sheet? It shows the full range of features available with the PicoScope software, making your PicoScope 2000 Series oscilloscope even more powerful. This includes how to use your oscilloscope as a spectrum analyzer. All of these capabilities are included in the price of your oscilloscope. Ordering information ORDER CODE PP823 PP798 TA136 TA139 PP787 PART DESCRIPTION PicoScope 2205 MSO PicoScope 2205 MSO kit 25 cm digital cable Pack of 10 clips 2 x 60 MHz MI007 probes with probe pouch UK headquarters: Pico Technology James House Colmworth Business Park St. Neots Cambridgeshire PE19 8YP United Kingdom +44 (0) 1480 396 395 +44 (0) 1480 396 296 sales@picotech.com GBP* 299 349 10 18 30 US headquarters: Pico Technology 320 N Glenwood Blvd Tyler Texas 75702 United States +1 800 591 2796 +1 620 272 0981 sales@picotech.com *Prices are correct at the time of publication. VAT not included. Please contact Pico Technology for the latest prices before ordering. Errors and omissions excepted. Copyright (c) 2012-2014 Pico Technology Ltd. All rights reserved. MM031.en-4 www.picoscopemso.com USD* 493 576 17 30 50 EUR* 362 422 12 22 36