Part Number 856771 358.4 MHz SAW Filter Data Sheet Features For WCDMA Applications Usable Bandwidth of 19.2 MHz Low Loss High Attenuation Balanced Operation Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Package Pin Configuration Surface Mount 7.01 x 5.51 x 1.63 mm SMP-28B Bottom View 1 0.76 1.63 NOM. 1.78 MAX. 7.01 4 11 5 10 6 9 1.27 Pin No. 10 12 4 6 1,2,3,5 7,8,9,11 5.51 0.79 1.14 3 12 1.27 1.70 2 8 7 Description Input + Input Output + Output Case Ground Case Ground Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.13mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating Subject to change or obsolescence without notice Rev C 12/09 (c) TriQuint Semiconductor Page 1 of 5 Part Number 856771 358.4 MHz SAW Filter Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) -33 to +85 C Parameter (3) Minimum Typical (4) Maximum Unit Center Frequency Insertion Loss at Center Frequency Lower 5 dB Bandedge (5) Upper 5 dB Bandedge (5) Amplitude Variation 348.8 - 368 MHz Absolute Group Delay Group Delay Variation 348.8 - 368 MHz Absolute Attenuation (5) 10.00 - 286.40 MHz 286.40 - 307.40 MHz 307.40 - 327.70 MHz 327.70 - 335.40 MHz 335.40 - 341.15 MHz 341.15 - 341.65 MHz 341.65 - 342.15 MHz 342.15 - 342.90 MHz 373.90 - 374.65 MHz 374.65 - 375.15 MHz 375.15 - 375.40 MHz 375.40 - 381.40 MHz 381.40 - 389.10 MHz 389.10 - 409.40 MHz 409.40 - 430.40 MHz 430.40 - 640.00 MHz 640.00 - 720.00 MHz 720.00 - 1000 MHz Time Side-lobe Response Attenuation (1.0 - 500 s) Source Impedance Balanced (6) Load Impedance Balanced (6) 343.4 - 358.4 10.1 344.8 371.8 12.5 373.4 MHz dB MHz MHz - 0.3 470 1.0 600 dB p-p ns - 25 60 ns p-p 55 55 40 30 25 20 15 10 10 15 20 25 30 40 55 55 50 55 40 - 70 62 52 51 38 31 25 17 17 25 32 37 49 51 64 66 55 70 48 200 200 - dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB Notes: 1. All specifications are based on the TriQuint test circuit shown on page 4 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Relative to insertion loss at center frequency 6. This is the optimum impedance in order to achieve the performance shown Subject to change or obsolescence without notice Rev C 12/09 (c) TriQuint Semiconductor Page 2 of 5 Part Number 856771 358.4 MHz SAW Filter Data Sheet Typical Performance (at room temperature) Subject to change or obsolescence without notice Rev C 12/09 (c) TriQuint Semiconductor Page 3 of 5 Part Number 856771 358.4 MHz SAW Filter Data Sheet Matching Schematics Actual matching values may vary due to PCB layout and parasitics 4pF 3pF 12 200 Balanced Input 4 36nH 200 10 1,2,3,5 7,8,9,11 6 3pF 4pF Marking PCB Footprint 1.34 TriQuint 856771 JJJYHH ID dot 200 Balanced Output 200 30nH .28 .99 1.34 .28 Date code 5.71 .99 7.21 The date code consists of: day of the current year (Julian, 3 digits), Y=last digit of the year (1 digit) and H=military hour (2 digits) This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 16.8 2.7 ID dot O330 4.0 0.3 2.0 O1.5 A 1.75 7.5 16.0 7.3 O102 Direction of travel O20.2 O13.0 2.0 2.2 5.8 8.0 O1.5 A Section A-A Dimensions shown are nominal in millimeters Packaging quantity: 3000 units/reel Subject to change or obsolescence without notice Rev C 12/09 (c) TriQuint Semiconductor Page 4 of 5 Part Number 856771 358.4 MHz SAW Filter Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Input Power (at +50 C for 24 hours max) Symbol Minimum Maximum T Tstg Pin -33 -40 - +85 +85 +19 Unit o C C dBm o Important Notes Warnings Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance This product complies with EU directive 2002/95/EC (RoHS) Pb Solderability Compatible with JESD22-B102, Pb-free process, 260C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters Soldering Profile RoHS Information Other Technical Information TriQuint's liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: info-product@tqs.com Web: www.triquint.com Rev C 12/09 Or contact one of our worldwide Network of sales offices, Representatives or distributors (c) TriQuint Semiconductor Page 5 of 5