1
Power Supply Connectors For Industrial Equipment
PX Series
Structure prevents mis-insertion
As this window is opened, contact
section can easily be checked.
Since the retainer portion is lowered
by onestep, the possibility of spring
deformation is minimized even if the
lock is released.
retainer
Wall structure prevents
retainer deformation
Contact spring
guard section
Applicable Wire Size (AWG No.)
Sealing section
(3 contacts)
16-18
Reliable contact structure
■Features
1. Power supply connector for high-current
Withstands voltage of 2200V AC max. and 10A/contact
(60A/6contacts) of rating current.
2. Housing design prevents incorrect insertion
Opening section is designed to prevent reverse insertion and
mating direction is easily checked.
Additionally, the opening section is keyed to prevent
misalignment of plugs in parallel applications.
3. Reduced Size
When compared to traditional products, Hirose’s plug is
smaller in size by 65% and the receptacle is smaller by 55%.
4. Reliable contact structure
➀Three point contact
➁Gold plated contacts (standard) with high-level environmental
resistance
➂Contact spring guard structure
➃Structure prevents retainer deformation
5. Easy Cable Assembly
➀Use of dedicated crimping tools will make harness work
easier.One tool crimps both AWG#16 and AWG#18 wire.
➁Positive lock can be felt on contact insertion.
➂Release of contact lock can easily be performed with
dedicated jig, which facilitates the wiring modification after
assembly.
Key
Label space
Avoid any
short between
adjacent
contacts
Two layer structure
enables high-density
mounting.
Shape of opening prevents reverse insertion
2006.3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
2
■Product Specifications
■Materials
Parts
Contacts
Insulator
Metal fixture
Copper alloy
PBT (UL94V-0)
Copper alloy
Gold plating
Tin reflow plating
Material Finish
BComparison In Size With Conventional Equivalent
Plug Width
Height
Depth
Width
Height
Depth
34.2
07.0
23.0
28.0
14.8
27.4
44.94
07.15
22.80
39.40
18.47
27.18
Receptacle
PX A company-made
Description
1.Contact resistance
2.
Insulation resistance
3.Withstanding voltage
10mø max.
1000Mø min.
No flashover or insulation breakdown.
100mA
500V DC
2200V AC / 1 minute.
1000 cycles
Frequency:10 to 55Hz,single amplitude of 0.75mm,
2 hours,3axis
Acceleration: 490m/s2Duration: 11ms
Test at sine half-wave, 3 axes, bi-directional three times, respectively.
Temperature
: -55
/
+5~+35
/
+85
/
+5~+35ç
Time : -30
/
+10~+15
/
+30
/
+10~15
Minutes
5 cycles
96 hours at 40±2çand humidity of 90~95%
5% salt water for 48 hours
➀Contact resistance : 20mømax.
➁No damage, cracks or looseness of parts
➀No electrical discontinuity of 10µs or more.
➁Contact resistance : 20mø max.
➂No damage, cracks or looseness of parts
➀Contact resistance : 20mømax.
➁Insulation resistance : 1000Mø min.
➂No damage, cracks or looseness of parts
➀Contact resistance : 20mø max.
➁Insulation resistance : 1000Mø min.
➂No damage, cracks or looseness of parts
➀No corrosions
4.Durability
5.Vibration
6.Shock
9.
Salt spray
7.Temperature cycle
8.Humidity
Specifications Requirements
Ratings
Operating temperature range
Voltage rating
Current rating
-55ç~+105ç
600V AC
10A
For volume ratio, plug is downsized to : nearly 65%; and
receptacle : nearly 55%.
(mm) Plug Receptacle
width
7
1
12
6
R
S
width
depth
1
8
3456
79
10
PX10
1112
AF6WP
2
AF
PX50-AF6S
height
12345
depth
6
A
A
F
F
A
height
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
3
■Receptacles
B
Dimensions For Circuit Board
Installation(For your reference)
t=1.6~2.4
✽ Where t=1.6 (Setting value depends on thickness of boards.)
BPCB mounting pattern
●6position/2r ow Type
Part No.
PX10-AF6WP(50)
CL No.
236-0001-0-50
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
4
B
Dimensions For Circuit Board
Installation(For your reference)
t=1.6~2.4
✽ Where t=1.6 (Setting value depends on thickness of boards.)
BPCB mounting pattern
●4Position/2 Row Type
terminal No.1 terminal No.4
terminal No.5 terminal No.8
Label space size 17.2∞10.2
R
S
8
14
D
56
25.2
1
8
34
7
PX10
AD4WP
2
21.2
14.8
22.8
4.1
8 6.7
4.5
27.4
A
A
D
5
3.4
10.2
11.4
3.8
7.3
8.4
terminal No.6
terminal No.5
terminal No.2
terminal No.1
(through-hole)
terminal No.8
terminal No.7
terminal No.4
terminal No.3
connector position
10.2
P=3.4
6.7 11.4
P= 3.8
8-Ø1.4
(6)
(through-hole)
22.8
board end
(8)
3.7
R0.75
1.5
π
5.09
5.09
Part No.
PX10-AD4WP(50)
CL No.
236-0005-0-50
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
5
■Plug
●6-Position Type
●4-Position Type
21.5
PX50
--- AD4S
1234
A
terminal No.1
terminal No.2 terminal No.3
terminal No.4
AD
7
21.2
27.4
23
Label space size 11.6∞6.1
(This picture shows the state of cable insertion.)
Part No.
PX50-AF6S
CL No.
236-0002-2
RoHS
YES
Part No.
PX50-AD4S
CL No.
236-0006-3
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
6
■Simple-Type Plug Holder Cover
●For 6-Position Type
BInstallation method
●6-Position Type
●4-Position Type
BInstallation status
●For 4-Position Type
A
PX-
22.8
10.6
15.9
4WS-CV
Label Space Size 17.2∞6.1
D
A
AD
PX50-AD4S
(2-layerd)
1234
A
PX-
4WS-CV
➀➁
➂➃
<Caution>The holder cover is not a rugged support fixture but only meant for alignment of the plugs. If external force is imposed by pulling of cables,
etc. before mating, please bundle all cables together around the connector with union bands, etc.
Part No.
PX-6WS-CV
CL No.
236-0004-8
RoHS
YES
Part No.
PX-4WS-CV
CL No.
236-0007-6
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
7
■Crimp contact
Applicable wire size Packaging Part No. CL No. Quantity RoHS
16, 18 Reel
Bag PX50-SC-231
PX50-SC-131 236-0003-5
236-0008-9 5,000
200 YES
Please order by integral multiple of the packing volume.
■Tools
Type Description Part No. CL No. Applicable contacts
Automatic
Manual
Contact extraction tool
Press unit
Applicator
Hand tool (✽)
CM-105
AP105-PX50-3
HT104/PX50-3
PX50-SC-TC
901-0005-4
901-2573-8
250-0229-4
250-0233-1 PX50-SC-131
PX50-SC-✽31
PX50-SC-231
✽ For our manual crimping tools, we employ the rotate-replace procedure to use the crimper depending on wire size.
Note : Since manual crimping tool cannot provide fine adjustment of crimp height, please use the proper crimp height of auto crimper in crimping of
the wires other than specified ones
Applicable AWG size
Rotate to set the crimper such that applicable
AWG size fits the crimping section.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
8
■Crimp Terminal Drawing Jig
●How To Extract Crimp Terminal
PX50-SC-TC CL250-0233-1
When the crimp terminal drawing jig is inserted and pushed from the fitting section of a connector as shown below, retainer lock of the
terminal will be released. Then please extract the cable. If the retainer is too lowered after extracting terminal, put it in a former position and
reinsert. Position and direction of the jig top to be inserted are as shown in the Figures below.
Be careful that any mistake will lead to the damage of terminal.
➀ ➁
➂➃
<WARNING>
✽ Insert the jig top into the peak of convex section on terminal hole.
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
®
Part No.
PX-50-SC-TC
CL No.
250-0233-1
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
