Silicon Bridge Rectifiers Features: * * * * Surge overload rating -50 amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique results in expensive product Mounting position : Any Specifications: Reverse Voltage : 100Volts to 1,000Volts Forward Current : 1.5 Amperes Maximum Ratings And Electrical Characteristics: Rating at 25C ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% Characteristics Symbol W01M W02M W04M W06M W08M W10M Unit Max. Recurrent Peak Reverse Voltage Vrrm 100 200 400 600 800 1,000 V Max. RMS Voltage Vrms 70 140 280 420 560 700 V Max. DC Blocking Voltage Vdc 100 200 400 600 800 1,000 V Max. Average Forward Rectified Current @Ta=25C I(av) 1.5 A Peak Forward Surge Current , 8.3ms Single Half Sine-Wave Super Imposed on Rated Load Ifsm 50 A I2t Rating for Fusing (t < 8.3ms) I 2t 5 A2s Max. Forward Voltage Drop Per Element at 1.5A Peak Vf 1.1 V Max. Reverse Current at Rated Tj = 25C DC Blocking Voltage Tj = 100C Ir 10 1 A mA Operating Temperature Range Tj -55 to +150 C Tstg -55 to +150 C Storage Temperature Range www.element14.com www.farnell.com www.newark.com Page <1> 12/02/13 V1.0 Silicon Bridge Rectifiers www.element14.com www.farnell.com www.newark.com Page <2> 12/02/13 V1.0 Silicon Bridge Rectifiers Dimensions : Inches (Millimetres) Part Number Table Description Part Number W01M W10M Silicon Bridge Rectifier 1.5A W04M W06M W08M W02M Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <3> 12/02/13 V1.0