83
回転方向 風吹出方向
60±0.5
50±0.3
60±0.5
50±0.3
(10)
+50
300 0
4-ø4.5±0.3
38±0.5
4±0.3 4±0.3
取付用穴
ード
AWG24
UL 1430
静圧
風量
(Pa) DC12 V
(inch H2O)
(CFM)
(m3/min)
1800
1600
200
400
600
800
1000
1200
1400
1.6
01.20.4 0.8 2.0
0 10 20 30 40 50 60 70
0
1
2
3
4
5
6
7
PWMデューティ
100%
20%
静圧
風量
(Pa)(inch H2O)
(CFM)
(m3/min)
PWMデューティ100%
1800
1600
200
400
600
800
1000
1200
1400
1.6
01.20.4 0.8 2.0
0 10 20 30 40 50 60 70
0
1
2
3
4
5
6
712 V/12.6 V
10.8 V
回転速度
PWM デューティサイクル
電圧:DC12 V
PWM周波数:25 kHz
(min-1)
(%)
0 100
18000
16000
14000
12000
10000
8000
6000
4000
22000
20000
2000
21700 min-1
DC
DC Fan 60 mm sq.
Model no.
Rated voltage
Operating voltage range
PWM duty
cycle*
[%]
Rated current
Rated input
Rated speed Max. airow
Max. static pressure
SPL
Operating temperature
Expected life
[V] [V] [A] [W] [min-1]
[m³/min]
[CFM] [Pa] [inchH²O] [dB (A)] [˚C] [h]
9HV0612P1J001 12 10.8 to 12.6 100 2.7 32.4 21700 1.88 66.4 1750 7.0 68 -20 to +70
40000/60˚C
(70000/40˚C)
20 0.17 2.04 5300 0.43 15.2 102 0.41 34
* PWM frequency: 25 kHz. Fan does not rotate when PWM duty cycle is 0%.
Rotating direction Airow direction
Lead wire
Mounting hole
Static pressure
Airow
Static pressure
Airow
Fan speed
PWM duty cycle
Voltage: 12 VDC
PWM frequency: 25 kHz
PWM duty cycle
PWM duty cycle 100%
12 VDC
DC Fan
60×60×38 mm
San Ace 60 9HV type
General Specications
Material ………………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
Expected life …………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C,
rated voltage)
Motor protection function ………………… Locked rotor burnout protection, Reverse polarity protection
For details, please refer to p. 529.
Dielectric strength …………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
Insulation resistance ………………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
Sound pressure level (SPL) ……………… At 1 m away from the air inlet
Storage temperature ……………………… -30 to +70˚C (Non-condensing)
Lead wire ……………………………………… Red Black Sensor Yellow Control Brown
Mass ……………………………………………… 135 g
Specications
The models listed below
have ribs and pulse sensors with PWM control function.
For models without ribs, append "1" to the end of model numbers.
PWM duty cycle Operating voltage range PWM duty - Speed characteristics example
Airow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example
9HV0612P1J001 With pulse sensor with PWM control function
Dimensions (unit: mm) (With ribs)
84
29.7
50±0.3
4-ø4.5
59
50±0.3
29.7
59
62.7
Inlet side, Outlet side
Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)
Options
Finger guards page: p. 513 Resin nger guards page: p. 520
Model no.: 109-139E, 109-139H Model no.: 109-1003G
Resin lter kits page: p. 521
Model no.: 109-1003F13 (13PPI), 109-1003F20 (20PPI),
109-1003F30 (30PPI), 109-1003F40 (40PPI)