A
Laird Technologies’ unique Phantom® antenna operates simultaneously in the 698-960 MHz and 1700-
2700 MHz bands, making it ideal for 4G/3G applications. The mechanically robust design is suitable for
both indoor and outdoor applications with wide bandwidth and a low angle radiation pattern that is superior
to traditional gain antennas in most applications. The antenna is ideal for both ceiling and surface mount
applications.
The industry standard NMO mounting socket mates with all Laird Technologies’ magnetic, trunk lid and
hole mount configurations. A threaded permanent stud mount model is also available for vandal resistant
mounting on brackets, panels, ceilings or any other kind of housing.
Mechanically robust for both indoor and outdoor
applications
Applicable for both 3G and 4G application
Domestic LTE 700 band and Global LTE 2600 band
WiMAX 2300/2500/2600 bands
Domestic Cellular and Global GSM
Phantom out-performs a 3-dBi whip in
many applications
Operating Frequency (MHz)
698-960, 1710-2700
VSWR
698-806 MHz
1710-2110 MHz
2110- 2170 MHz
2300- 2700 MHz
< 2.5: 1.0
< 2.0: 1.0
< 2.5: 1.0
< 2.0: 1.0
Peak Gain (dBi)
698-960 MHz
1710-1990 MHz
2100-2700 MHz
3.5
5.5
4.6
Efficiency (%)
698-960 MHz
1710-1990 MHz
2100-2700 MHz
90 (max: 96)
91 (max: 95)
80 (max: 86)
Nominal Impedance (Ohms)
50
Max Power - Ambient 25°C (W)
100
Polarization
Vertical
Terminations
NMO or P-Mount w/Type N(f)
Dimensions diameter x height cm (inches)
8.38 x 3.65 (3.3 x 1.44)
Color
Black or white available
Cable and Mount
MB195 (sold separately)
Radome Material
SABIC Lexan
Operating Environment (Indoor or Outdoor)
Indoor and Outdoor
Operating Temperature °C (°F)
-40 to +85°C (-40 to +185°F)
Material Substance Compliance
RoHS
Ingress Protection Rating
IP67
TRA6927M3PB-001
4G/3G Phantom®
Black
3.30”
0.31 lbs Type N(f)
TRA6927M3NB-001
4G/3G Phantom®
Black
3.30”
0.28 lbs NMO
TRA6927M3PW-001
4G/3G Phantom®
White
3.30”
0.31 lbs Type N(f)
TRA6927M3NW-001
4G/3G Phantom®
White
3.30”
0.28 lbs NMO
TRA6927M3PB-002¹
4G/3G Phantom®
Black
3.30”
0.38 lbs Type N(f)
TRA6927M3PW-002¹
4G/3G Phantom®
White
3.30”
0.38 lbs Type N(f)
Permanent Mounting Option:
The letter P in the above part numbers indicates a permanent mounting option.
¹ Extended Connector 23 mm maximum plate thickness.
Americas: +1.847 839.6925
IAS-AmericasSales@lairdtech.com
Europe: +44.1628.858941
IAS-EUSales@lairdtech.com
Asia: IAS-AsiaSales@lairdtech.com
Middle East and Africa:
+44.1628.858941
IAS-MEAUSales@lairdtech.com
www.lairdtech.com
Laird warrants to the original end user customer of its products that its products are free from defects in material and workmanship. Subject to conditions and
limitations Laird will, at its option, either repair or replace any part of its products that prove defective because of improper workmanship or materials. This limited
warranty is in force for the useful lifetime of the original end product into which the Laird product is installed. Useful lifetime of the original end product may vary
but is not to exceed five (5) years from the original date of the end product purchase.
Any information furnished by Laird Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility
for the use and application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties
as to the fitness,
merchantability or suitability of any Laird materials or products for any specific or general uses. Laird shall not be liable for incidental or consequential damages
of any kind. All Laird products are sold pursuant to the Laird Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon
request.
© Copyright 2018 Laird Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Logo, and other marks are trademarks or registered trademarks of Laird
Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird or
any third party intellectual property rights.