20
Catalog 1773408-1 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 2-09 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
SFP+ Products
Pluggable Input / Output Solutions
Fibre Channel is a trademark of the Fibre
Channel Industry Association.
PCI is a trademark of PCI-SIG.
Product Facts
■SFP+ interconnect system
supports data rates of
10 Gb/s
■Connector designed to
support 10 Gb/s+ signal
speeds, backward
compatible with SFP
■Both EMI spring and gasket
options for cages provide
excellent shielding
■All cage configurations are
offered with lightpipes for
LED applications
■Heat sink optional for single
port cages
■Cages are available for
PCI card applications
(one degree mounting angle)
■Cages accommodate
belly-to-belly mounting
■Stacked cages include
integrated high speed
connector using patented
wafer construction
■Active and passive copper
cable assemblies provide a
cost-effective solution for
short reach applications
Applications
■Storage
■Servers
■Networking
■Switches
■Routers
■Hubs
■Network Interface Cards
(NICs)
SFP+ extends the use of the
Small Form-Factor Pluggable
(SFP) interconnect up to
10 Gb/s. This system meets
the performance require-
ments of SFF (Small Form-
Factor) specification
SFF-8431 and supports
8G Fibre Channel and
10G Ethernet applications.
The SFP+ product family
includes cages, connectors,
and copper cable assem-
blies. SFP+ cages are
offered with both EMI
springs and elastomeric
conductive gaskets for EMI
containment at the panel
opening, and come in sin-
gle port, ganged and
stacked port configurations.
Connectors are designed to
optimize performance at
higher data rates. A con-
ductive EMI plug is avail-
able to reduce EMI through
an empty (unused) SFP+
cage port. Tyco Electronics
also offers LC optical con-
nectors and cable assem-
blies to link with SFP+
transceivers.
Technical Documents
Application Specifications
114-13120 Single & Ganged Cages
114-13219 Stacked Cages
Product Specification
108-2331
Industry Standards
SFF-8432 Cage and module definition
SFF-8083 Mating Interface and
performance requirements
SFF-8431 Electrical Interface
Specifications
21
Catalog 1773408-1 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 2-09 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
SFP+ Single Port and Ganged Cages
Pluggable Input / Output Solutions
Note: All part numbers are RoHS compliant.
PCI is a trademark of PCI-SIG.
Cages with EMI Springs
Description Single Port 1x2 1x4 1x6
Cage Assy w/ Lightpipes 2007254-1 2007262-1 2007178-1 2007250-1
Cage Assy 2007198-1 2007263-1 2007132-1 2007251-1
Cage Assy w/ PCI Heat Sink 2007464-1 ———
Cage Assy w/ SAN Heat Sink 2007464-2 ———
Cage Assy w/ Networking Heat Sink 2007464-3 ———
Cages with
Elastomeric Gaskets
Description 1x2 1x4 1x6
Cage Assy w/ Lightpipes 2007180-1 2007093-1 2007169-1
Cage Assy 2007181-1 2007135-1 2007170-1
Cages for PCI Applications
One degree mounting angle
to meet requirements of
SFF-8075
Description Solder Press-Fit
Cage Assy 2007194-1 2007215-1
Cage Assy w/ PCI Heat Sink & Clip 2007193-1 2007277-1
Connectors
Contact Plating Part Number
0.76 µm (30 µin) gold 1888247-1
0.38 µm (15 µin) gold 1888247-2
1°
22
Catalog 1773408-1 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 2-09 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
SFP+ Stacked (Dual Row) Cage/Connector Assemblies
Pluggable Input / Output Solutions
Note: All part numbers are RoHS compliant.
PCI is a trademark of PCI-SIG.
Stacked SFP+ Cage/
Connector Assemblies
Description
EMI Containment Style Lightpipe Option 2x1 2x2 2x4 2x6
Elastomeric Gasket Four Per Column 2007538-5 2007417-5 2007399-5 2007567-5
Elastomeric Gasket Inner Lightpipes Only 2007538-6 2007417-6 2007399-6 2007567-6
Elastomeric Gasket Outer Lightpipes Only 2007538-7 2007417-7 2007399-7 2007567-7
Elastomeric Gasket None 2007538-8 2007417-8 2007399-8 2007567-8
EMI Springs Four Per Column 2007492-5 2007637-5 2007394-5 2007562-5
EMI Springs Inner Lightpipes Only 2007492-6 2007637-6 2007394-6 2007562-6
EMI Springs Outer Lightpipes Only 2007492-7 2007637-7 2007394-7 2007562-7
EMI Springs None 2007492-8 2007637-8 2007394-8 2007562-8
Note: Tin plated compliant pins listed, tin-lead compliant pins available for signal connector.
See Tyco Electronics drawing.
Dust Plug (Non-conductive) For Uses In Part Number
Single Port Cages 1367147-1 or 1761394-1
Ganged and Stacked (Multi-port) Cages 1761394-1
Note: Dust plug 1761394-1 has narrow width, required for port density in
ganged and stacked cages.
EMI Plug
Part Number 1888901-1
Springs comply with SFF-8432
requirements for Improved
Pluggable Form-factor (IPF)
23
Catalog 1773408-1 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 2-09 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Pluggable Input / Output Solutions
Note: All part numbers are RoHS compliant.
SFP+ Copper Cable Assemblies
The Tyco Electronics SFP+
direct attach copper cable
assembly is a low cost
alternative for short reach
applications. The design
allows for a serial data
transmission up to 10 Gbps
in each direction. These
SFP+ assemblies are
hot swappable and the
programmed EEPROM
signature enables the host
to differentiate between a
copper cable assembly
and a fiber optic module.
The mechanical design of
the braid crimp and EMI
skirt help ensure that EMI
radiation is sufficiently
suppressed. Additionally,
the copper cable acts as a
natural heat sink. The low
power consumption assists
in making the passive
copper cable assembly
an economic solution for
within rack, or rack to rack
applications. Standard
SFP+ assemblies are
offered in 24 AWG, however,
several smaller wire gauges
are available.
Product Facts
■Truly broadband — operates
from 1 Gbps to 10 Gbps
■Compatible with industry
standard SFP cages
■100 Ohm differential
impedance
■3.3 V input source voltage
■EEPROM signature which
can be customized
■Pull-to-release retractable
pin latch design
■Pull tab allows compact
belly-to-belly application
■360 degree cable braid
crimp and enhanced
EMI skirt
■Various wire gauges provide
flexible cable management
options
■Uses MADISON TURBOTWIN
copper cable
Type Part Number AWG Description
2032237-1 24 0.5 meter SFP+ Cable Assembly
Standard 2032237-2 24 1 meter SFP+ Cable Assembly
Passive 2032237-4 24 3 meter SFP+ Cable Assembly
2032237-6 24 5 meter SFP+ Cable Assembly
1-2032237-1 24 10 meter SFP+ Cable Assembly
2032247-1 26 0.5 meter SFP+ Cable Assembly
2032247-2 26 1 meter SFP+ Cable Assembly
2032247-4 26 3 meter SFP+ Cable Assembly
2032247-6 26 5 meter SFP+ Cable Assembly
1-2032247-1 26 10 meter SFP+ Cable Assembly
Other AWG 2053649-1 28 0.5 meter SFP+ Cable Assembly
Passive 2053649-2 28 1 meter SFP+ Cable Assembly
2053649-4 28 3 meter SFP+ Cable Assembly
2053649-6 28 5 meter SFP+ Cable Assembly
2032246-1 30 0.5 meter SFP+ Cable Assembly
2032246-2 30 1 meter SFP+ Cable Assembly
2032246-4 30 3 meter SFP+ Cable Assembly
2032246-6 30 5 meter SFP+ Cable Assembly
2032757-1 24 1 meter SFP+ Cable Assembly
Active 2032757-5 24 5 meter SFP+ Cable Assembly
(Coming Soon) 1-2032757-0 24 10 meter SFP+ Cable Assembly
1-2032757-5 24 15 meter SFP+ Cable Assembly
Note: All part numbers are RoHS compliant.
24
Catalog 1773408-1 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 2-09 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Pluggable Input / Output Solutions
SFP+ Copper Cable Assemblies (Continued)
High Speed Electrical
Measurements
Tyco Electronics SFP+ passive
copper cable assemblies are
fully compliant to SFF-8431.
WDP Specifications
Cable Gauge Cable Length WDPo (dB) WDPi (dB) dWDP
Spec Limit ———6.75
30 AWG 3 meter 6.16 2.4 3.76
28 AWG 5 meter 7.49 2.4 5.09
26 AWG 6 meter 8.36 2.4 5.96
24 AWG 7 meter 7.44 2.4 5.04
VMA and VCR Measurements
VMA and VCR measure-
ments listed in the table
below are for the set
lengths. To be compliant
with SFF 8431 Rev 3.2 the
VMA measurements must
be less than 4.5 dB while
testing with the module
compliance test board.
The VCR measurement is
determined by computing
VMA and NEXT RMS
voltage measurements.
The VCR measurement
must be greater than 33 dB
to be SFF-8431 Rev 3.2
compliant.
WDP Measurements
WDP measurements listed
in the table below are for set
lengths at two different
cable gauges. Any cable
with the same gauge and a
shorter length than the
length listed will have a
lower dWDP number.
Measurements were taken
with an input signal that had
pre-emphasis applied to
achieve a WDPi of 2.4 dBe
while using the SFP+
Module Compliance
Board (MCB) and Host
Compliance Board (HCB).
A copper cable assembly
will be compliant with the
SFP+ MSA Rev 3.2 if the
dWDP number is less than
6.75 dBe.
VMA and VCR Specifications
Cable Gauge Cable Length VMA (dB) VCR (dB)
Spec Limit — 4.5 33
30 AWG 3 meter 3.03875 40.6572
28 AWG 5 meter 3.93609 38.53281
26 AWG 6 meter 3.94267 35.82669
24 AWG 7 meter 2.86154 37.79826
For additional SFP+ cable assembly technical information, see customer drawing 2032237.
