SINGLE-IN-LINE SOCKETS Solder Tail Double Row 2,54 2,54 0,38 0,25 Series 41X double row strip sockets are on 2,54 grid. Various solder pins available (standard, long for multi-layer boards, very low and ultra low). Using Mill-Max pin #'s 1001, 0134, 0501 & 1534. Hi-Rel, 4-finger BeCu #30 & #12 clips are rated at 3 amps. See pages 207 & 208 for details. 0,64 0,46 2,41 3,71 5,08 2,54 2,79 0,51 4,19 3,18 Ordering Information 2,54 Fig. 1 Series 410...001 0,38 0,64 0,25 0,46 3,81 2,62 Series 410, 411, 415 Fig. 1 2,79 Standard Solder Tail 410-XX-2_ _-41-001000 Specify # of pins 4,19 02-64 Series 411...001 0,51 4,32 Fig. 2 Long Solder Tail 411-XX-2_ _-41-001000 Specify # of pins 02-64 2,54 Series 415...001 Fig. 2 0,38 0,64 0,25 0,46 Fig. 3 Very Low Profile 415-XX-2_ _-41-001000 Specify # of pins 3,84 2,44 2,79 3,1 2,74 0,76 02-64 Series 415...003 Fig. 4 Ultra Low Profile 415-XX-2_ _-41-003000000 Specify # of pins 02-72 (Standard Insulator is High Temperature) 2,54 Fig. 3 0,38 0,25 0,56 0,46 1,8 1,8 2,41 For RoHS compliance, select plating code. For the all gold option (XX=13) also change part number from 41X-XX-2XX-41-00X000 to 41X-13-2XX-41-00X100 XX=Plating Code See Below 3,94 2,41 2,54 SPECIFY PLATING CODE XX= Sleeve (Pin) Fig. 4 w w w. m i l l - m a x . c o m 13 91 93 99 41 0,25m Au 200" Sn/Pb 5,08m Sn/Pb 200" Sn/Pb Contact (Clip) 0,76m Au 51 10" Au 0,76m Au 200" Sn/Pb 43 44 200" Sn 5,08m Sn 200" Sn 10" Au 0,76m Au 200" Sn 516-922-6000