+V+V O
0.1 µF0.33 µF
µA78xx
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
uA7805
,
uA7808
,
uA7810
uA7812
,
uA7815
,
uA7824
SLVS056P MAY 1976REVISED JANUARY 2015
µA78xx Fixed Positive Voltage Regulators
1 Features 3 Description
This series of fixed-voltage integrated-circuit voltage
1 3-Terminal Regulators regulators is designed for a wide range of
Available in fixed 5-V/8-V/10-V/12-V/15-V/24-V applications. These applications include on-card
options regulation for elimination of noise and distribution
Output Current up to 1.5 A problems associated with single-point regulation.
Each of these regulators can deliver up to 1.5 A of
Internal Thermal-Overload Protection output current. The internal current-limiting and
High Power-Dissipation Capability thermal-shutdown features of these regulators
Internal Short-Circuit Current Limiting essentially make them immune to overload. In
addition to use as fixed-voltage regulators, these
Output Transistor Safe-Area Compensation devices can be used with external components to
Output Capacitor Not Needed for Stability obtain adjustable output voltages and currents, and
also can be used as the power-pass element in
2 Applications precision regulators.
On-card Regulation Device Information(1)
Portable Devices PART NUMBER PACKAGE BODY SIZE (NOM)
Computing & Servers TO-220 (3) 10.16 mm x 8.82 mm
Telecommunications μA78xx TO-220 (3) 10.16 mm x 8.82 mm
TO-263 (3) 10.06 mm x 9.02 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
4 Simplified Schematic
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
uA7805
,
uA7808
,
uA7810
uA7812
,
uA7815
,
uA7824
SLVS056P MAY 1976REVISED JANUARY 2015
www.ti.com
Table of Contents
1 Features.................................................................. 18 Detailed Description............................................ 11
8.1 Overview................................................................. 11
2 Applications ........................................................... 18.2 Functional Schematic.............................................. 11
3 Description............................................................. 18.3 Feature Description................................................. 11
4 Simplified Schematic............................................. 18.4 Device Functional Modes........................................ 11
5 Revision History..................................................... 29 Application and Implementation ........................ 12
6 Pin Configuration and Functions......................... 39.1 Application Information............................................ 12
7 Specifications......................................................... 49.2 Typical Application ................................................. 12
7.1 Absolute Maximum Ratings ...................................... 410 Power Supply Recommendations ..................... 14
7.2 ESD Ratings ............................................................ 411 Layout................................................................... 15
7.3 Recommended Operating Conditions....................... 411.1 Layout Guidelines ................................................. 15
7.4 Thermal Information.................................................. 411.2 Layout Example .................................................... 15
7.5 Electrical Characteristics uA7805......................... 512 Device and Documentation Support................. 15
7.6 Electrical Characteristics uA7808......................... 612.1 Related Links ........................................................ 15
7.7 Electrical Characteristics uA7810......................... 712.2 Trademarks........................................................... 15
7.8 Electrical Characteristics uA7812 ........................ 812.3 Electrostatic Discharge Caution............................ 15
7.9 Electrical Characteristics uA7815......................... 912.4 Glossary................................................................ 15
7.10 Electrical Characteristics uA7824..................... 10 13 Mechanical, Packaging, and Orderable
7.11 Typical Characteristics.......................................... 10 Information........................................................... 15
5 Revision History
Changes from Revision O (August 2012) to Revision P Page
Added Applications,Device Information table, Pin Functions table, ESD Ratings table, Thermal Information table,
Typical Characteristics,Feature Description section, Device Functional Modes,Application and Implementation
section, Power Supply Recommendations section, Layout section, Device and Documentation Support section, and
Mechanical, Packaging, and Orderable Information section.................................................................................................. 1
Deleted Ordering Information table. ....................................................................................................................................... 1
2Submit Documentation Feedback Copyright © 1976–2015, Texas Instruments Incorporated
Product Folder Links: uA7805 uA7808 uA7810 uA7812 uA7815 uA7824
KTE (PowerFLEX ) PACKAGE
(TOP VIEW)
TM
OUTPUT
COMMON
INPUT
COMMON
COMMON
KTT (TO-263) PACKAGE
(TOP VIEW)
OUTPUT
COMMON
INPUT
KC (TO-220) PACKAGE
(TOP VIEW)
COMMON
OUTPUT
INPUT
COMMON
OUTPUT
KCS OR KCT (TO-220) PACKAGE
(TOP VIEW)
INPUT
COMMON
COMMON
OBSOLETE
OBSOLETE
uA7805
,
uA7808
,
uA7810
uA7812
,
uA7815
,
uA7824
www.ti.com
SLVS056P MAY 1976REVISED JANUARY 2015
6 Pin Configuration and Functions
Pin Functions
PIN TYPE DESCRIPTION
NAME NO.
COMMON 2 Ground
INPUT 1 I Supply Input
OUTPUT 3 O Voltage Output
Copyright © 1976–2015, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Links: uA7805 uA7808 uA7810 uA7812 uA7815 uA7824
uA7805
,
uA7808
,
uA7810
uA7812
,
uA7815
,
uA7824
SLVS056P MAY 1976REVISED JANUARY 2015
www.ti.com
7 Specifications
7.1 Absolute Maximum Ratings
over virtual junction temperature range (unless otherwise noted) MIN MAX UNIT
μA7824C 40
VlInput voltage V
All others 35
TJOperating virtual junction temperature 150 °C
Lead temperature 1,6 mm (1/16 in) from case for 10 s 260 °C
Tstg Storage temperature range –65 150 °C
7.2 ESD Ratings VALUE UNIT
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins(1) 3000
V(ESD) Electrostatic discharge V
Charged device model (CDM), per JEDEC specification JESD22-C101, 2000
all pins(2)
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
7.3 Recommended Operating Conditions MIN MAX UNIT
μA7805 7 25
μA7808 10.5 25
μA7810 12.5 28
VlInput voltage V
μA7812 14.5 30
μA7815 17.5 30
μA7824 27 38
IOOutput current 1.5 A
TJOperating virtual junction temperature 0 125 °C
7.4 Thermal Information
μA78XX
KTE KCS, KCT, KTT
THERMAL METRIC(1) UNIT
KC
3 PINS 3 PINS 3 PINS
RθJA Junction-to-ambient thermal resistance 23 19 25.3
RθJC(top) Junction-to-case (top) thermal resistance 3 17 18 °C/W
RθJP(top) Junction-to-exposed-pad thermal resistance 2.7 3 1.94
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report (SPRA953).
4Submit Documentation Feedback Copyright © 1976–2015, Texas Instruments Incorporated
Product Folder Links: uA7805 uA7808 uA7810 uA7812 uA7815 uA7824
uA7805
,
uA7808
,
uA7810
uA7812
,
uA7815
,
uA7824
www.ti.com
SLVS056P MAY 1976REVISED JANUARY 2015
7.5 Electrical Characteristics uA7805
at specified virtual junction temperature, VI= 10 V, IO= 500 mA (unless otherwise noted)
μA7805C
PARAMETER TEST CONDITIONS TJ(1) UNIT
MIN TYP MAX
25°C 4.8 5 5.2
IO= 5 mA to 1 A, VI= 7 V to 20 V,
Output voltage V
PD15 W 0°C to 125°C 4.75 5.25
VI= 7 V to 25 V 3 100
Input voltage regulation 25°C mV
VI= 8 V to 12 V 1 50
VI= 8 V to 12 V, f = 120 Hz 62 78
Ripple rejection(2) 0°C to 125°C dB
VI= 8 V to 12 V, f = 120 Hz (KCT) 68
IO= 5 mA to 1.5 A 15 100
Output voltage regulation 25°C mV
IO= 250 mA to 750 mA 5 50
Output resistance f = 1 kHz 0°C to 125°C 0.017
Temperature coefficient of output voltage IO= 5 mA 0°C to 125°C –1.1 mV/°C
Output noise voltage f = 10 Hz to 100 kHz 25°C 40 μV
Dropout voltage IO= 1 A 25°C 2 V
Bias current 25°C 4.2 8 mA
VI= 7 V to 25 V 1.3
Bias current change 0°C to 125°C mA
IO= 5 mA to 1 A 0.5
Short-circuit output current 25°C 750 mA
Peak output current 25°C 2.2 A
(1) Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be
taken into account separately. All characteristics are measured with a 0.33-μF capacitor across the input and a 0.1-μF capacitor across
the output.
(2) This parameter is validated by design and verified during product characterization. It is not tested in production.
Copyright © 1976–2015, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Links: uA7805 uA7808 uA7810 uA7812 uA7815 uA7824
uA7805
,
uA7808
,
uA7810
uA7812
,
uA7815
,
uA7824
SLVS056P MAY 1976REVISED JANUARY 2015
www.ti.com
7.6 Electrical Characteristics uA7808
at specified virtual junction temperature, VI= 14 V, IO= 500 mA (unless otherwise noted)
μA7808C
PARAMETER TEST CONDITIONS TJ(1) UNIT
MIN TYP MAX
25°C 7.7 8 8.3
IO= 5 mA to 1 A, VI= 10.5 V to 23 V,
Output voltage V
PD15 W 0°C to 125°C 7.6 8.4
VI= 10.5 V to 25 V 6 160
Input voltage regulation 25°C mV
VI= 11 V to 17 V 2 80
VI= 11.5 V to 21.5 V, f = 120 Hz 55 72
Ripple rejection(2) 0°C to 125°C dB
VI= 11.5 V to 21.5 V, f = 120 Hz 62
(KCT)
IO= 5 mA to 1.5 A 12 160
Output voltage regulation 25°C mV
IO= 250 mA to 750 mA 4 80
Output resistance f = 1 kHz 0°C to 125°C 0.016
Temperature coefficient of output voltage IO= 5 mA 0°C to 125°C –0.8 mV/°C
Output noise voltage f = 10 Hz to 100 kHz 25°C 52 μV
Dropout voltage IO= 1 A 25°C 2 V
Bias current 25°C 4.3 8 mA
VI= 10.5 V to 25 V 1
Bias current change 0°C to 125°C mA
IO= 5 mA to 1 A 0.5
Short-circuit output current 25°C 450 mA
Peak output current 25°C 2.2 A
(1) Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be
taken into account separately. All characteristics are measured with a 0.33-μF capacitor across the input and a 0.1-μF capacitor across
the output.
(2) This parameter is validated by design and verified during product characterization. It is not tested in production.
6Submit Documentation Feedback Copyright © 1976–2015, Texas Instruments Incorporated
Product Folder Links: uA7805 uA7808 uA7810 uA7812 uA7815 uA7824
uA7805
,
uA7808
,
uA7810
uA7812
,
uA7815
,
uA7824
www.ti.com
SLVS056P MAY 1976REVISED JANUARY 2015
7.7 Electrical Characteristics uA7810
at specified virtual junction temperature, VI= 17 V, IO= 500 mA (unless otherwise noted)
μA7810C
PARAMETER TEST CONDITIONS TJ(1) UNIT
MIN TYP MAX
25°C 9.6 10 10.4
IO= 5 mA to 1 A, VI= 12.5 V to 25 V,
Output voltage V
PD15 W 0°C to 125°C 9.5 10.5
VI= 12.5 V to 28 V 7 200
Input voltage regulation 25°C mV
VI= 14 V to 20 V 2 100
Ripple rejection(2) VI= 13 V to 23 V, f = 120 Hz 0°C to 125°C 55 71 dB
IO= 5 mA to 1.5 A 12 200
Output voltage regulation 25°C mV
IO= 250 mA to 750 mA 4 100
Output resistance f = 1 kHz 0°C to 125°C 0.018
Temperature coefficient of output voltage IO= 5 mA 0°C to 125°C –1 mV/°C
Output noise voltage f = 10 Hz to 100 kHz 25°C 70 μV
Dropout voltage IO= 1 A 25°C 2 V
Bias current 25°C 4.3 8 mA
VI= 12.5 V to 28 V 1
Bias current change 0°C to 125°C mA
IO= 5 mA to 1 A 0.5
Short-circuit output current 25°C 400 mA
Peak output current 25°C 2.2 A
(1) Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be
taken into account separately. All characteristics are measured with a 0.33-μF capacitor across the input and a 0.1-μF capacitor across
the output.
(2) This parameter is validated by design and verified during product characterization. It is not tested in production.
Copyright © 1976–2015, Texas Instruments Incorporated Submit Documentation Feedback 7
Product Folder Links: uA7805 uA7808 uA7810 uA7812 uA7815 uA7824
uA7805
,
uA7808
,
uA7810
uA7812
,
uA7815
,
uA7824
SLVS056P MAY 1976REVISED JANUARY 2015
www.ti.com
7.8 Electrical Characteristics uA7812
at specified virtual junction temperature, VI= 19 V, IO= 500 mA (unless otherwise noted)
μA7812C
PARAMETER TEST CONDITIONS TJ(1) UNIT
MIN TYP MAX
25°C 11.5 12 12.5
IO= 5 mA to 1 A, VI= 14.5 V to 27 V,
Output voltage V
PD15 W 0°C to 125°C 11.4 12.6
VI= 14.5 V to 30 V 10 240
Input voltage regulation 25°C mV
VI= 16 V to 22 V 3 120
VI= 15 V to 25 V, f = 120 Hz 55 71
Ripple rejection(2) 0°C to 125°C dB
VI= 15 V to 25 V, f = 120 Hz (KCT) 61
IO= 5 mA to 1.5 A 12 240
Output voltage regulation 25°C mV
IO= 250 mA to 750 mA 4 120
Output resistance f = 1 kHz 0°C to 125°C 0.018
Temperature coefficient of output voltage IO= 5 mA 0°C to 125°C –1 mV/°C
Output noise voltage f = 10 Hz to 100 kHz 25°C 75 μV
Dropout voltage IO= 1 A 25°C 2 V
Bias current 25°C 4.3 8 mA
VI= 14.5 V to 30 V 1
Bias current change 0°C to 125°C mA
IO= 5 mA to 1 A 0.5
Short-circuit output current 25°C 350 mA
Peak output current 25°C 2.2 A
(1) Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be
taken into account separately. All characteristics are measured with a 0.33-μF capacitor across the input and a 0.1-μF capacitor across
the output.
(2) This parameter is validated by design and verified during product characterization. It is not tested in production.
8Submit Documentation Feedback Copyright © 1976–2015, Texas Instruments Incorporated
Product Folder Links: uA7805 uA7808 uA7810 uA7812 uA7815 uA7824
uA7805
,
uA7808
,
uA7810
uA7812
,
uA7815
,
uA7824
www.ti.com
SLVS056P MAY 1976REVISED JANUARY 2015
7.9 Electrical Characteristics uA7815
at specified virtual junction temperature, VI= 23 V, IO= 500 mA (unless otherwise noted)
μA7815C
PARAMETER TEST CONDITIONS TJ(1) UNIT
MIN TYP MAX
25°C 14.4 15 15.6
IO= 5 mA to 1 A, VI= 17.5 V to 30 V,
Output voltage V
PD15 W 0°C to 125°C 14.25 15.75
VI= 17.5 V to 30 V 11 300
Input voltage regulation 25°C mV
VI= 20 V to 26 V 3 150
VI= 18.5 V to 28.5 V, f = 120 Hz 54 70
Ripple rejection(2) 0°C to 125°C dB
VI= 18.5 V to 28.5 V, f = 120 Hz 60
(KCT)
IO= 5 mA to 1.5 A 12 300
Output voltage regulation 25°C mV
IO= 250 mA to 750 mA 4 150
Output resistance f = 1 kHz 0°C to 125°C 0.019
Temperature coefficient of output voltage IO= 5 mA 0°C to 125°C –1 mV/°C
Output noise voltage f = 10 Hz to 100 kHz 25°C 90 μV
Dropout voltage IO= 1 A 25°C 2 V
Bias current 25°C 4.4 8 mA
VI= 17.5 V to 30 V 1
Bias current change 0°C to 125°C mA
IO= 5 mA to 1 A 0.5
Short-circuit output current 25°C 230 mA
Peak output current 25°C 2.1 A
(1) Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be
taken into account separately. All characteristics are measured with a 0.33-μF capacitor across the input and a 0.1-μF capacitor across
the output.
(2) This parameter is validated by design and verified during product characterization. It is not tested in production.
Copyright © 1976–2015, Texas Instruments Incorporated Submit Documentation Feedback 9
Product Folder Links: uA7805 uA7808 uA7810 uA7812 uA7815 uA7824
2.5
3.0
3.5
4.0
4.5
0 5 10 15 20
Bias Current (mA)
VIN - VOUT (typ)
IBIAS
C001
uA7805
,
uA7808
,
uA7810
uA7812
,
uA7815
,
uA7824
SLVS056P MAY 1976REVISED JANUARY 2015
www.ti.com
7.10 Electrical Characteristics uA7824
at specified virtual junction temperature, VI= 33 V, IO= 500 mA (unless otherwise noted)
μA7824C
PARAMETER TEST CONDITIONS TJ(1) UNIT
MIN TYP MAX
25°C 23 24 25
IO= 5 mA to 1 A, VI= 27 V to 38 V,
Output voltage V
PD15 W 0°C to 125°C 22.8 25.2
VI= 27 V to 38 V 18 480
Input voltage regulation 25°C mV
VI= 30 V to 36 V 6 240
Ripple rejection(2) VI= 28 V to 38 V, f = 120 Hz 0°C to 125°C 50 66 dB
IO= 5 mA to 1.5 A 12 480
Output voltage regulation 25°C mV
IO= 250 mA to 750 mA 4 240
Output resistance f = 1 kHz 0°C to 125°C 0.028
Temperature coefficient of output voltage IO= 5 mA 0°C to 125°C –1.5 mV/°C
Output noise voltage f = 10 Hz to 100 kHz 25°C 170 μV
Dropout voltage IO= 1 A 25°C 2 V
Bias current 25°C 4.6 8 mA
VI= 27 V to 38 V 1
Bias current change 0°C to 125°C mA
IO= 5 mA to 1 A 0.5
Short-circuit output current 25°C 150 mA
Peak output current 25°C 2.1 A
(1) Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be
taken into account separately. All characteristics are measured with a 0.33-μF capacitor across the input and a 0.1-μF capacitor across
the output.
(2) This parameter is validated by design and verified during product characterization. It is not tested in production.
7.11 Typical Characteristics
Figure 1. µA7805 Bias Current vs Voltage Differential at 25°C
10 Submit Documentation Feedback Copyright © 1976–2015, Texas Instruments Incorporated
Product Folder Links: uA7805 uA7808 uA7810 uA7812 uA7815 uA7824
INPUT
OUTPUT
COMMON
uA7805
,
uA7808
,
uA7810
uA7812
,
uA7815
,
uA7824
www.ti.com
SLVS056P MAY 1976REVISED JANUARY 2015
8 Detailed Description
8.1 Overview
This series of fixed-voltage integrated-circuit voltage regulators is designed for a wide range of applications.
These applications include on-card regulation for elimination of noise and distribution problems associated with
single-point regulation. Each of these regulators can deliver up to 1.5 A of output current. The internal current-
limiting and thermal-shutdown features of these regulators essentially make them immune to overload. In
addition to use as fixed-voltage regulators, these devices can be used with external components to obtain
adjustable output voltages and currents, and also can be used as the power-pass element in precision
regulators.
8.2 Functional Schematic
8.3 Feature Description
8.3.1 Thermal Overload
When the die temperature increases to unwanted levels, the device will reduce the output current to lower its
temperature. Under heavy loads, the device may alternate between on and off output states to regulate
temperature.
8.3.2 Short-Circuit Current Limiting
In the event of a short circuit, the device will limit its own current to safe levels by lowering the bias voltage of
internal pass transistors. If the device becomes overheated, the thermal overload protection will take over.
8.4 Device Functional Modes
8.4.1 Fixed-Output Mode
These devices are available in fixed-output voltages. See the orderable part list for the desired output.
Copyright © 1976–2015, Texas Instruments Incorporated Submit Documentation Feedback 11
Product Folder Links: uA7805 uA7808 uA7810 uA7812 uA7815 uA7824
+V+V O
0.1 µF0.33 µF
µA78xx
uA7805
,
uA7808
,
uA7810
uA7812
,
uA7815
,
uA7824
SLVS056P MAY 1976REVISED JANUARY 2015
www.ti.com
9 Application and Implementation
NOTE
Information in the following applications sections is not part of the TI component
specification, and TI does not warrant its accuracy or completeness. TI’s customers are
responsible for determining suitability of components for their purposes. Customers should
validate and test their design implementation to confirm system functionality.
9.1 Application Information
The following section shows application details of the µA78xx as a linear regulator.
9.2 Typical Application
Figure 2. Fixed-Output Regulator
9.2.1 Design Requirements
Input supply capacitor recommended for filtering noise on the input
Output supply decoupling capacitor for stabilizing the output
9.2.2 Detailed Design Procedure
9.2.2.1 Operation With a Load Common to a Voltage of Opposite Polarity
In many cases, a regulator powers a load that is not connected to ground but, instead, is connected to a voltage
source of opposite polarity (e.g., operational amplifiers, level-shifting circuits, etc.). In these cases, a clamp diode
should be connected to the regulator output as shown in Figure 3. This protects the regulator from output polarity
reversals during startup and short-circuit operation.
Figure 3. Output Polarity-Reversal-Protection Circuit
9.2.2.2 Reverse-Bias Protection
Occasionally, the input voltage to the regulator can collapse faster than the output voltage. This can occur, for
example, when the input supply is crowbarred during an output overvoltage condition. If the output voltage is
greater than approximately 7 V, the emitter-base junction of the series-pass element (internal or external) could
break down and be damaged. To prevent this, a diode shunt can be used as shown in Figure 4.
12 Submit Documentation Feedback Copyright © 1976–2015, Texas Instruments Incorporated
Product Folder Links: uA7805 uA7808 uA7810 uA7812 uA7815 uA7824
R1
0.33 µF
Input Output
µA78xx
0.1 µF
I
R2
O
A: The following formula is used when V
xx is the nominal output voltage (output to common) of the fixed regulators
XX
O XX Q
V
V V I R2
R1
æ ö
= + +
ç ÷
è ø
OUTIN G
−VO
COM
+
VI
A78xx
IL
µ
1.00
1.20
1.40
1.60
1.80
2.00
2.20
2.40
0.00 0.25 0.50 0.75 1.00 1.25 1.50
Voltage Loss (V)
Output Current (A)
Voltage Loss
C001
µA78xx +VO
VI
uA7805
,
uA7808
,
uA7810
uA7812
,
uA7815
,
uA7824
www.ti.com
SLVS056P MAY 1976REVISED JANUARY 2015
Typical Application (continued)
Figure 4. Reverse-Bias-Protection Circuit
9.2.3 Application Curves
Figure 5. µA7805 Voltage Loss vs Output Current at 25°C
9.2.4 General Configurations
Figure 6. Positive Regulator in Negative Configuration (VIMust Float)
Figure 7. Adjustable-Output Regulator
Copyright © 1976–2015, Texas Instruments Incorporated Submit Documentation Feedback 13
Product Folder Links: uA7805 uA7808 uA7810 uA7812 uA7815 uA7824
µA7815C
0.1 µF1N4001
0.1 µF1N4001
0.33 µF
2µF
1N4001
1N4001
VO= 15 V
VO= −15 V
20-V Input
−20-V Input µA7915C
1µF
VO(Reg)
R1
Input
I
I
O
O= (VO/R1) + IOBias Current
0.33 µF
µA78xx
Output
uA7805
,
uA7808
,
uA7810
uA7812
,
uA7815
,
uA7824
SLVS056P MAY 1976REVISED JANUARY 2015
www.ti.com
Typical Application (continued)
Figure 8. Current Regulator
Figure 9. Regulated Dual Supply
10 Power Supply Recommendations
See Recommended Operating Conditions for the recommended power supply voltages for each variation of the
μA78xx device. Different orderable part numbers will be able to tolerate different levels of voltage. It is also
recommended to have a decoupling capacitor on the output of the μA78xx device's power supply to limit noise
on the device input.
14 Submit Documentation Feedback Copyright © 1976–2015, Texas Instruments Incorporated
Product Folder Links: uA7805 uA7808 uA7810 uA7812 uA7815 uA7824
COMMON
OUTPUT
COMMON
INPUT
PF
Ground
PF
Ground
uA7805
,
uA7808
,
uA7810
uA7812
,
uA7815
,
uA7824
www.ti.com
SLVS056P MAY 1976REVISED JANUARY 2015
11 Layout
11.1 Layout Guidelines
Keep trace widths large enough to eliminate problematic I×R voltage drops at the input and output terminals.
Input decoupling capacitors should be placed as close to the μA78XX as possible.
11.2 Layout Example
Figure 10. Layout Diagram
12 Device and Documentation Support
12.1 Related Links
The table below lists quick access links. Categories include technical documents, support and community
resources, tools and software, and quick access to sample or buy.
Table 1. Related Links
TECHNICAL TOOLS & SUPPORT &
PARTS PRODUCT FOLDER SAMPLE & BUY DOCUMENTS SOFTWARE COMMUNITY
μA7805 Click here Click here Click here Click here Click here
uA7808 Click here Click here Click here Click here Click here
uA7810 Click here Click here Click here Click here Click here
uA7812 Click here Click here Click here Click here Click here
uA7815 Click here Click here Click here Click here Click here
uA7924 Click here Click here Click here Click here Click here
12.2 Trademarks
12.3 Electrostatic Discharge Caution
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
12.4 Glossary
SLYZ022 TI Glossary.
This glossary lists and explains terms, acronyms, and definitions.
13 Mechanical, Packaging, and Orderable Information
The following pages include mechanical, packaging, and orderable information. This information is the most
current data available for the designated devices. This data is subject to change without notice and revision of
this document. For browser-based versions of this data sheet, refer to the left-hand navigation.
Copyright © 1976–2015, Texas Instruments Incorporated Submit Documentation Feedback 15
Product Folder Links: uA7805 uA7808 uA7810 uA7812 uA7815 uA7824
PACKAGE OPTION ADDENDUM
www.ti.com 11-Apr-2017
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status
(1)
Package Type Package
Drawing Pins Package
Qty Eco Plan
(2)
Lead/Ball Finish
(6)
MSL Peak Temp
(3)
Op Temp (°C) Device Marking
(4/5)
Samples
UA7805CKCS ACTIVE TO-220 KCS 3 50 Pb-Free
(RoHS) CU SN N / A for Pkg Type 0 to 125 UA7805C
UA7805CKCSE3 ACTIVE TO-220 KCS 3 50 Pb-Free
(RoHS) CU SN N / A for Pkg Type 0 to 125 UA7805C
UA7805CKCT ACTIVE TO-220 KCT 3 50 Pb-Free
(RoHS) CU SN N / A for Pkg Type 0 to 125 UA7805C
UA7805CKTTR ACTIVE DDPAK/
TO-263 KTT 3 500 Green (RoHS
& no Sb/Br) CU SN Level-3-245C-168 HR 0 to 125 UA7805C
UA7805CKTTRG3 ACTIVE DDPAK/
TO-263 KTT 3 500 Green (RoHS
& no Sb/Br) CU SN Level-3-245C-168 HR 0 to 125 UA7805C
UA7808CKCS ACTIVE TO-220 KCS 3 50 Pb-Free
(RoHS) CU SN N / A for Pkg Type 0 to 125 UA7808C
UA7808CKCSE3 ACTIVE TO-220 KCS 3 50 Pb-Free
(RoHS) CU SN N / A for Pkg Type 0 to 125 UA7808C
UA7808CKCT ACTIVE TO-220 KCT 3 50 Pb-Free
(RoHS) CU SN N / A for Pkg Type 0 to 125 UA7808C
UA7808CKTTR ACTIVE DDPAK/
TO-263 KTT 3 500 Green (RoHS
& no Sb/Br) CU SN Level-3-245C-168 HR 0 to 125 UA7808C
UA7808CKTTRG3 ACTIVE DDPAK/
TO-263 KTT 3 500 Green (RoHS
& no Sb/Br) CU SN Level-3-245C-168 HR 0 to 125 UA7808C
UA7810CKCS ACTIVE TO-220 KCS 3 50 Pb-Free
(RoHS) CU SN N / A for Pkg Type 0 to 125 UA7810C
UA7810CKCSE3 ACTIVE TO-220 KCS 3 50 Pb-Free
(RoHS) CU SN N / A for Pkg Type 0 to 125 UA7810C
UA7810CKTTR ACTIVE DDPAK/
TO-263 KTT 3 500 Green (RoHS
& no Sb/Br) CU SN Level-3-245C-168 HR 0 to 125 UA7810C
UA7810CKTTRG3 ACTIVE DDPAK/
TO-263 KTT 3 500 Green (RoHS
& no Sb/Br) CU SN Level-3-245C-168 HR 0 to 125 UA7810C
UA7812CKCS ACTIVE TO-220 KCS 3 50 Pb-Free
(RoHS) CU SN N / A for Pkg Type 0 to 125 UA7812C
UA7812CKCSE3 ACTIVE TO-220 KCS 3 50 Pb-Free
(RoHS) CU SN N / A for Pkg Type 0 to 125 UA7812C
UA7812CKCT ACTIVE TO-220 KCT 3 50 Pb-Free
(RoHS) CU SN N / A for Pkg Type 0 to 125 UA7812C
PACKAGE OPTION ADDENDUM
www.ti.com 11-Apr-2017
Addendum-Page 2
Orderable Device Status
(1)
Package Type Package
Drawing Pins Package
Qty Eco Plan
(2)
Lead/Ball Finish
(6)
MSL Peak Temp
(3)
Op Temp (°C) Device Marking
(4/5)
Samples
UA7812CKTTR ACTIVE DDPAK/
TO-263 KTT 3 500 Green (RoHS
& no Sb/Br) CU SN Level-3-245C-168 HR 0 to 125 UA7812C
UA7812CKTTRG3 ACTIVE DDPAK/
TO-263 KTT 3 500 Green (RoHS
& no Sb/Br) CU SN Level-3-245C-168 HR 0 to 125 UA7812C
UA7815CKCS ACTIVE TO-220 KCS 3 50 Pb-Free
(RoHS) CU SN N / A for Pkg Type 0 to 125 UA7815C
UA7815CKCSE3 ACTIVE TO-220 KCS 3 50 Pb-Free
(RoHS) CU SN N / A for Pkg Type 0 to 125 UA7815C
UA7815CKCT ACTIVE TO-220 KCT 3 50 Pb-Free
(RoHS) CU SN N / A for Pkg Type 0 to 125 UA7815C
UA7815CKTTR ACTIVE DDPAK/
TO-263 KTT 3 500 Green (RoHS
& no Sb/Br) CU SN Level-3-245C-168 HR 0 to 125 UA7815C
UA7824CKCS ACTIVE TO-220 KCS 3 50 Pb-Free
(RoHS) CU SN N / A for Pkg Type 0 to 125 UA7824C
UA7824CKCSE3 ACTIVE TO-220 KCS 3 50 Pb-Free
(RoHS) CU SN N / A for Pkg Type 0 to 125 UA7824C
UA7824CKTTR ACTIVE DDPAK/
TO-263 KTT 3 500 Green (RoHS
& no Sb/Br) CU SN Level-3-245C-168 HR 0 to 125 UA7824C
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
PACKAGE OPTION ADDENDUM
www.ti.com 11-Apr-2017
Addendum-Page 3
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
UA7805CKTTR DDPAK/
TO-263 KTT 3 500 330.0 24.4 10.8 16.3 5.11 16.0 24.0 Q2
UA7805CKTTR DDPAK/
TO-263 KTT 3 500 330.0 24.4 10.8 16.1 4.9 16.0 24.0 Q2
UA7808CKTTR DDPAK/
TO-263 KTT 3 500 330.0 24.4 10.8 16.3 5.11 16.0 24.0 Q2
UA7810CKTTR DDPAK/
TO-263 KTT 3 500 330.0 24.4 10.8 16.3 5.11 16.0 24.0 Q2
UA7812CKTTR DDPAK/
TO-263 KTT 3 500 330.0 24.4 10.8 16.3 5.11 16.0 24.0 Q2
UA7812CKTTR DDPAK/
TO-263 KTT 3 500 330.0 24.4 10.8 16.1 4.9 16.0 24.0 Q2
UA7815CKTTR DDPAK/
TO-263 KTT 3 500 330.0 24.4 10.8 16.3 5.11 16.0 24.0 Q2
UA7824CKTTR DDPAK/
TO-263 KTT 3 500 330.0 24.4 10.8 16.3 5.11 16.0 24.0 Q2
PACKAGE MATERIALS INFORMATION
www.ti.com 21-Mar-2017
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
UA7805CKTTR DDPAK/TO-263 KTT 3 500 340.0 340.0 38.0
UA7805CKTTR DDPAK/TO-263 KTT 3 500 350.0 334.0 47.0
UA7808CKTTR DDPAK/TO-263 KTT 3 500 340.0 340.0 38.0
UA7810CKTTR DDPAK/TO-263 KTT 3 500 340.0 340.0 38.0
UA7812CKTTR DDPAK/TO-263 KTT 3 500 340.0 340.0 38.0
UA7812CKTTR DDPAK/TO-263 KTT 3 500 350.0 334.0 47.0
UA7815CKTTR DDPAK/TO-263 KTT 3 500 340.0 340.0 38.0
UA7824CKTTR DDPAK/TO-263 KTT 3 500 340.0 340.0 38.0
PACKAGE MATERIALS INFORMATION
www.ti.com 21-Mar-2017
Pack Materials-Page 2
www.ti.com
PACKAGE OUTLINE
9.25
9.05
6.5
6.1
2.9
2.6
10.36
9.96
13.12
12.70
3X
3.9 MAX
3X 1.36
1.23
3X 0.90
0.77
( )3.84
5.08
2X 2.54
8.55
8.15
12.5
12.1
(6.3)
19.65 MAX
4.7
4.4
1.32
1.22
2.79
2.59
0.47
0.34
4222214/A 10/2015
TO-220 - 19.65 mm max heightKCS0003B
TO-220
NOTES:
1. All controlling linear dimensions are in inches. Dimensions in brackets are in millimeters. Any dimension in brackets or parenthesis are for
reference only. Dimensioning and tolerancing per ASME Y14.5M.
2. This drawing is subject to change without notice.
3. Reference JEDEC registration TO-220.
13
SCALE 0.850
www.ti.com
EXAMPLE BOARD LAYOUT
0.07 MAX
ALL AROUND
0.07 MAX
ALL AROUND
(1.7)
3X ( )1.2
(2.54)
(5.08)
R ( )0.05
2X ( )
METAL
1.7
2X SOLDER MASK
OPENING
4222214/A 10/2015
TO-220 - 19.65 mm max heightKCS0003B
TO-220
LAND PATTERN EXAMPLE
NON-SOLDER MASK DEFINED
SCALE:15X
123
OPENING
SOLDER MASK
IMPORTANT NOTICE
Texas Instruments Incorporated (TI) reserves the right to make corrections, enhancements, improvements and other changes to its
semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers
should obtain the latest relevant information before placing orders and should verify that such information is current and complete.
TI’s published terms of sale for semiconductor products (http://www.ti.com/sc/docs/stdterms.htm) apply to the sale of packaged integrated
circuit products that TI has qualified and released to market. Additional terms may apply to the use or sale of other types of TI products and
services.
Reproduction of significant portions of TI information in TI data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such reproduced
documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements
different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the
associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Buyers and others who are developing systems that incorporate TI products (collectively, “Designers”) understand and agree that Designers
remain responsible for using their independent analysis, evaluation and judgment in designing their applications and that Designers have
full and exclusive responsibility to assure the safety of Designers' applications and compliance of their applications (and of all TI products
used in or for Designers’ applications) with all applicable regulations, laws and other applicable requirements. Designer represents that, with
respect to their applications, Designer has all the necessary expertise to create and implement safeguards that (1) anticipate dangerous
consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and
take appropriate actions. Designer agrees that prior to using or distributing any applications that include TI products, Designer will
thoroughly test such applications and the functionality of such TI products as used in such applications.
TI’s provision of technical, application or other design advice, quality characterization, reliability data or other services or information,
including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to
assist designers who are developing applications that incorporate TI products; by downloading, accessing or using TI Resources in any
way, Designer (individually or, if Designer is acting on behalf of a company, Designer’s company) agrees to use any particular TI Resource
solely for this purpose and subject to the terms of this Notice.
TI’s provision of TI Resources does not expand or otherwise alter TI’s applicable published warranties or warranty disclaimers for TI
products, and no additional obligations or liabilities arise from TI providing such TI Resources. TI reserves the right to make corrections,
enhancements, improvements and other changes to its TI Resources. TI has not conducted any testing other than that specifically
described in the published documentation for a particular TI Resource.
Designer is authorized to use, copy and modify any individual TI Resource only in connection with the development of applications that
include the TI product(s) identified in such TI Resource. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE
TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTY
RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or
endorsement thereof. Use of TI Resources may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
TI RESOURCES ARE PROVIDED “AS IS” AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES OR
REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING RESOURCES OR USE THEREOF, INCLUDING BUT NOT LIMITED TO
ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL
PROPERTY RIGHTS. TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY DESIGNER AGAINST ANY CLAIM,
INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF
PRODUCTS EVEN IF DESCRIBED IN TI RESOURCES OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL,
DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN
CONNECTION WITH OR ARISING OUT OF TI RESOURCES OR USE THEREOF, AND REGARDLESS OF WHETHER TI HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Unless TI has explicitly designated an individual product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949
and ISO 26262), TI is not responsible for any failure to meet such industry standard requirements.
Where TI specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, such
products are intended to help enable customers to design and create their own applications that meet applicable functional safety standards
and requirements. Using products in an application does not by itself establish any safety features in the application. Designers must
ensure compliance with safety-related requirements and standards applicable to their applications. Designer may not use any TI products in
life-critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use.
Life-critical medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., life
support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). Such equipment includes, without limitation, all
medical devices identified by the U.S. Food and Drug Administration as Class III devices and equivalent classifications outside the U.S.
TI may expressly designate certain products as completing a particular qualification (e.g., Q100, Military Grade, or Enhanced Product).
Designers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applications
and that proper product selection is at Designers’ own risk. Designers are solely responsible for compliance with all legal and regulatory
requirements in connection with such selection.
Designer will fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of Designer’s non-
compliance with the terms and provisions of this Notice.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2017, Texas Instruments Incorporated
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Texas Instruments:
UA7805CKC UA7805CKTER UA7805CKCS UA7805CKCSE3 UA7805CKCE3 UA7805CKCT UA7805CKTTR
UA7805CKTTRG3