5962-8755401M2A(54ACT138LMQB) - National Semiconductor

Original Creation Date: 07/02/96

Last Update Date: 03/17/97

Last Major Revision Date: 07/02/96

MN54ACT138-X REV 1B0 MICROCIRCUIT DATA SHEET

1-of-8 Decoder/Demultiplexer

General Description

The ACT138 is a high-speed 1-of-8 decoder / demultiplexer. This device is ideally suited

for high-speed bipolar memory chip select address decoding. The multiple input enables

allow parallel expansion to a 1-of-24 decoder using just three ACT138 devices or a 1-of-32

decoder using four ACT138 devices and one inverter.

NS Part Numbers

54ACT138DMQB

54ACT138FMQB

54ACT138LMQB

Industry Part Number

54ACT138

Prime Die

J138

Processing

MIL-STD-883, Method 5004

Quality Conformance Inspection

MIL-STD-883, Method 5005

Subgrp Description Temp ( C)

1 Static tests at +25 C

2 Static tests at +125 C

3 Static tests at -55 C

4 Dynamic tests at +25 C

5 Dynamic tests at +125 C

6 Dynamic tests at -55 C

7 Functional tests at +25 C

8A Functional tests at +125 C

8B Functional tests at -55 C

9 Switching tests at +25 C

10 Switching tests at +125 C

11 Switching tests at -55 C

MICROCIRCUIT DATA SHEET

MN54ACT138-X REV 1B0

Features

- Icc reduced by 50%

- Demultiplexing capability

- Multiple input enable for easy expansion

- Active LOW mutually exclusive outputs

- Outputs source/sink 24 mA

- ACT138 has TTL-compatible inputs

- Standard Military Drawing (SMD)

- ACT138: 5962-87554

MICROCIRCUIT DATA SHEET

MN54ACT138-X REV 1B0

(Absolute Maximum Ratings)

(Note 1)

Supply Voltage (Vcc) -0.5V to +7.0V

DC Input Diode Current (Iik) -20 mAVi = -0.5V +20 mAVi = Vcc +0.5V

DC Input Voltage (Vi) -0.5V to Vcc +0.5V

DC Output Diode Current (Iok) -20 mAVo = -0.5V +20 mAVo = Vcc +0.5V

DC Output Voltage (Vo) -0.5V to Vcc +0.5V

DC Output Source or Sink Current (Io) +50 mA

DC Vcc or Ground Current per Output Pin (Icc or Ignd) +50 mA

Storage Temperature (Tstg) -65 C to +150 C

Junction Temperature (Tj) 175 CCDIP

Note 1: Absolute maximum ratings are those values beyond which damage to the device may

occur. The databook specifications should be met, without exception, to ensure that

the system design is reliable over its power supply, temperature, and output/input

loading variables. National does not recommend operation of FACT TM circuits outside

databook specifications.

Recommended Operating Conditions

Supply Voltage (Vcc) 4.5V to 5.5V

Input Voltage (Vi) 0V to Vcc

Output Voltage (Vo) 0V to Vcc

Operating Temperature(Ta) -55 C to +125 C

Minimum Input Edge Rate (Delta V/ Delta t)

ACT Devices

Vin from 0.8V to 2.0V 125 mV/nsVcc @ 4.5V, 5.5V

MN54ACT138-X REV 1B0 MICROCIRCUIT DATA SHEET

Electrical Characteristics

DC PARAMETERS

(The following conditions apply to all the following parameters, unless otherwise specified.)

DC: VCC 4.5V to 5.5V, Temp. Range:-55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 3 IS GUARANTEED BUT NOT

TESTED.

SYMBOL PARAMETER CONDITIONS NOTES PIN-

NAME MIN MAX UNIT SUB-

GROUPS

IIH High level input

Current VCC=5.5V, VM=5.5V, VINH=5.5V 1, 2 INPUT 0.1 uA 1

1, 2 INPUT 1.0 uA 2, 3

IIL Low level input

Current VCC=5.5V, VM=0.0V, VINL=0.0V 1, 2 INPUT -0.1 uA 1

1, 2 INPUT -1.0 uA 2, 3

VOL Low level output

Voltage VCC=4.5V, VIH=2.0V, VIL=0.8V,

IOL=24.0mA 1, 2 OUTPUT .36 V 1

1, 2 OUTPUT .50 V 2, 3

VCC=5.5V, VIH=2.0V, VIL=0.8V,

IOL=24.0mA 1, 2 OUTPUT .36 V 1

1, 2 OUTPUT .50 V 2, 3

VCC=4.5V, VIH=2.0V, VIL=0.8V,

IOL=50.0uA 1, 2 OUTPUT .10 V 1, 2,

VCC=5.5V, VIH=2.0V, VIL=0.8V,

IOL=50.0uA 1, 2 OUTPUT .10 V 1, 2,

VIOL Low level Output

Current VCC=5.5V, VIH=2.0V, VIL=0.8V,

IOL=50.0mA 1,

2, 5 OUTPUT 1.65 V 1, 2,

VOH High Level Output

Voltage VCC=4.5V, VIH=2.0V, VIL=0.8V,

IOH=-24.0mA, VINH=4.5V, VINL=0.0V 1, 2 OUTPUT 3.86 V 1

1, 2 OUTPUT 3.70 V 2, 3

VCC=5.5V, VIH=2.0V, VIL=0.8V,

IOH=-24.0mA, VINH=5.5V, VINL=0.0V 1, 2 OUTPUT 4.86 V 1

1, 2 OUTPUT 4.70 V 2, 3

VCC=4.5V, VIH=2.0V, VIL=0.8V,

IOH=-50.0uA, VINH=4.5V, VINL=0.0V 1, 2 OUTPUT 4.40 V 1, 2,

VCC=5.5V, VIH=2.0V, VIL=0.8V,

IOH=-50.0uA, VINH=5.5V, VINL=0.0V 1, 2 OUTPUT 5.40 V 1, 2,

VIOH Dynamic Output

Current VCC=5.5V, VIH=2.0V, VIL=0.8V,

IOH=-50.0mA 1,

2, 5 OUTPUT 3.85 V 1, 2,

ICCH Supply Current

Outputs HIGH VCC=5.5V, VINH=5.5V 1, 2 VCC 4.0 uA 1

1, 2 VCC 80 uA 2, 3

ICCL Supply Current

Outputs LOW VCC=5.5V, VINH=5.5V, VINL=0.0V 1, 2 VCC 4.0 uA 1

1, 2 VCC 80 uA 2, 3

ICCT Supply Current

per Input VCC=5.5V, VIHT=VCC-2.1 1, 2 VCC 1.0 mA 1

1, 2 VCC 1.6 mA 2, 3

MN54ACT138-X REV 1B0 MICROCIRCUIT DATA SHEET

Electrical Characteristics

AC PARAMETERS

(The following conditions apply to all the following parameters, unless otherwise specified.)

AC: CL=50pf, RL=500 OHMS, TRISE=3.0ns, TFALL=3.0ns, Temp Range: -55C to 125C. NOTE: -55C TEMPERATURE,

SUBGROUP 11 IS GUARANTEED BUT NOT TESTED.

SYMBOL PARAMETER CONDITIONS NOTES PIN-

NAME MIN MAX UNIT SUB-

GROUPS

tpLH(1) Propagation Delay VCC=4.5V 3,

4, 6 An to

On 1.5 11.0 ns 9

4, 6 An to

On 1.5 12.5 ns 10, 11

tpHL(1) Propagation Delay VCC=4.5V 3,

4, 6 An to

On 1.5 11.0 ns 9

4, 6 An to

On 1.5 12.5 ns 10, 11

tpLH(2) Propagation Delay VCC=4.5V 3,

4, 6 E1orE2

to On 1.5 12.0 ns 9

4, 6 E1orE2

to On 1.5 13.5 ns 10, 11

tpHL(2) Propagation Delay VCC=4.5V 3,

4, 6 E1orE2

to On 1.5 11.5 ns 9

4, 6 E1orE2

to On 1.5 12.5 ns 10, 11

tpLH(3) Propagation Delay VCC=4.5V 3,

4, 6 E3 to

On 1.5 12.5 ns 9

4, 6 E3 to

On 1.5 14.0 ns 10, 11

tpHL(3) Propagation Delay VCC=4.5V 3,

4, 6 E3 to

On 1.5 10.5 ns 9

4, 6 E3 to

On 1.5 12.0 ns 10, 11

Note 1: SCREEN TESTED 100% ON EACH DEVICE AT +25C & +125C TEMPERATURE, SUBGROUPS 1, 2, 7, &

Note 2: SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE,

SUBGROUPS A1, 2, 7 & 8.

Note 3: SCREEN TESTED 100% ON EACH DEVICE AT +25C TEMPERATURE ONLY, SUBGROUP A9.

Note 4: SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE,

SUBGROUPS A9 & 10.

Note 5: TRANSMISSION LINE DRIVING TEST, GUARDBAND LIMITS SET FOR +25C, 2 MSEC DURATION MAX.

Note 6: +25C & +125C MIN LIMITS GUARANTEED FOR 5.5V BY GUARDBANDING 4.5V MIN. LIMITS.