P ROGRAMMABLE L OGIC P RODUCTS ATF15XX-DK3 CPLD DEVELOPMENT KIT LOGIC DOUBLING(R) T he ATF15xx-DK3 is a third-generation low-cost development/programmer kit for the designer who wishes to begin working with Atmel's ATF15xx family of industry-standard pin-compatible Complex Programmable Logic Devices (CPLDs) with Logic Doubling. Like the ATF15xx-DK2, the ATF15xx-DK3 allows designers to design, synthesize, simulate, program and evaluate their designs using either the free Atmel WinCUPL software or an evaluation version of Atmel's ProChip Designer(R) as well as the included 44-lead TQFP package adapter. The leading-edge synthesis and simulation software from Mentor Graphics(R) and Altium(R) are included in the ProChip Designer tool. The kit can be extended to be used to program all the different packages of the ATF15xx family by simply adding the package adapter options. Once the design is completed, the designer can install a sample ATF15xx family device in the provided PCB and program it using the built-in In-System Programmable (ISP) industry-standard 4-pin JTAG interface, the ATMISP software, and the provided PC parallel port cable. The included tutorial takes the designer through the complete CPLD development process. All the software runs on Windows(R) platforms. LEDs, switches, and expansion headers for all pins are provided to allow comprehensive prototyping and evaluation. The ATF15xx-DK3, includes everything a designer needs to get started with the Atmel Logic Doubling CPLDs. CPLD Demo/Programmer Board 44-lead TQFP Adapter ISP (JTAG) Port CPLD Programming Cable 5V, 3.3V and 1.8V ISP Cable for PC Parallel Port Expansion Headers 2 MHz Crystal Oscillator Four 7-segment LED Displays Eight Individual LEDs VCC Operation: 1.8V, 3.3V and 5.0V Easy Access to CPLD I/O Pins Global Clear, Output Enable, I/O and Power Switches Logic Doubling CPLDs ATF1502BE-7AU44, 1.8V, 32 Macrocell CPLD with ISP ATF1504ASV-15AU44, 3.3V, 64 Macrocell CPLD with ISP A TMEL ATF15 XX -DK3 EPLD S OFTWARE M ATRIX ProChip Designer Evaluation Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon, Hong Kong Tel: (852) 2721-9778 Fax: (852) 2722-1369 Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033, Japan Tel: (81) 3-3523-3551 Fax: (81) 3-3523-7581 Product Contact Programmable Logic Products 2325 Orchard Parkway San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 487-2600 www.atmel.com/products/PLD Literature Requests www.atmel.com/literature Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL'S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL'S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel's products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life. (c)Atmel Corporation 2006. All rights reserved. Atmel(R), logo and combinations thereof, Everywhere You Are(R), ProChip Designer(R), Logic Doubling(R) and others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Windows(R) and others are registered trademarks or trademarks of Microsoft Corporation. Mentor Graphics(R), ModelSIM(R) and others are registered trademarks or trademarks of Mentor Graphics Corporation or its subsidiaries in US and/or other countries. Other terms and product names may be trademarks of others. 3611A-PLD-01/06 VHDL(R) Verilog(R) CUPL(R) Schematic Atmel WinCupl Mentor Graphics Precision Synthesis(1) Synthesis Europe Atmel Sarl Route des Arsenaux 41 Case Postale 80 CH-1705 Fribourg, Switzerland Tel: (41) 26-426-5555 Fax: (41) 26-426-5500 VHDL Synthesis Verilog Synthesis Altium PeakFPGATM(2) VHDL Synthesis Altium Design Explorer 99SE(2) Schematic CUPL ModelSIM(R)(1) Simulation Regional Headquarters VHDL Simulation Verilog Simulation Altium PeakSIM (2) VHDL Simulation ATF15xxAS/ASL ATF15xxASV/ASVL ATF15xxBE Atmel's Fitters with Logic Doubling Fitters & Devices 2325 Orchard Parkway San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 487-2600 Design Entry Atmel Corporation Notes: CPLD Devices ATF1500A/AL ATF2500C SPLD Devices 1. 2. The evaluation period for Mentor Graphics Precision Synthesis and ModelSIM is six months. The evaluation period for Altium tools is 30 days. Ordering Information Ordering Code Description Price (USD) ATF15xx-DK3 Development/Programming Kit ATF15xx-DK3-SAA44 44-lead TQFP Package Adapter Included in DK3 Kit ATF15xx-DK3-SAJ44 44-lead PLCC Package Adapter $35 ATF15xx-DK3-SAJ84 84-lead PLCC Package Adapter $35 ATF15xx-DK3-SAA100 100-lead TQFP Package Adapter $135 ATF15xx-DK3-SAA144 144-lead TQFP Package Adapter $149 $99 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Atmel: ATF15XXDK3-SAJ84