RQ5RW54AA - Ricoh Co., Ltd.

APPLICATION MANUAL

SMALL PACKAGE

VOLTAGE REGULATOR

RQ5RW SERIES

NO. EA-048-9803

ELECTRONIC DEVICES DIVISION

NOTICE

1. The products and the product specifications described in this application manual are subject to change or

discontinuation of production without notice for reasons such as improvement. Therefore, before deciding to

use the products, please refer to Ricoh sales representatives for the latest information thereon.

2. This application manual may not be copied or otherwise reproduced in whole or in part without prior written

consent of Ricoh.

3. Please be sure to take any necessary formalities under relevant laws or regulations before exporting or

otherwise taking out of your country the products or the technical information described herein.

4. The technical information described in this application manual shows typical characteristics of and example

application circuits for the products. The release of such information is not to be construed as a warranty of or a

grant of license under Ricoh's or any third party's intellectual property rights or any other rights.

5. The products listed in this document are intended and designed for use as general electronic components in

standard applications (office equipment, computer equipment, measuring instruments, consumer electronic

products, amusement equipment etc.). Those customers intending to use a product in an application requiring

extreme quality and reliability, for example, in a highly specific application where the failure or misoperation of

the product could result in human injury or death (aircraft, spacevehicle, nuclear reactor control system, traffic

control system, automotive and transportation equipment, combustion equipment, safety devices, life support

system etc.) should first contact us.

6. We are making our continuous effort to improve the quality and reliability of our products, but semiconductor

products are likely to fail with certain probability. In order prevent any injury to persons or damages to property

resulting from such failure, customers should be careful enough to incorporate safety measures in their design,

such as redundancy feature, fire-containment feature and fail-safe feature. We do not assume any liability or

responsibility for any loss or damage arising from misuse or inappropriate use of the products.

7. Anti-radiation design is not implemented in the products described in this application manual.

8. Please contact Ricoh sales representatives should you have any questions or comments concerning the

products or the technical information.

June 1995

RQ5RW SERIES

APPLICATION MANUAL

CONTENTS

OUTLINE

......................................................................................................1

FEATURES

...................................................................................................1

APPLICATIONS

.............................................................................................1

BLOCK DIAGRAM

.........................................................................................2

SELECTION GUIDE

.......................................................................................2

PIN CONFIGURATION

...................................................................................3

PIN DESCRIPTION

........................................................................................3

ABSOLUTE MAXIMUM RATINGS

...................................................................3

ELECTRICAL CHARACTERISTICS

................................................................4

ELECTRICAL CHARACTERISTICS BY OUTPUT VOLTAGE

.............................6

ELECTRICAL CHARACTERISTICS BY OUTPUT VOLTAGE

(common characteristics)

..........................................................................7

OPERATION

..................................................................................................7

TEST CIRCUITS

............................................................................................8

TYPICAL CHARACTERISTICS

.......................................................................9

1) Output Voltage vs. Output Current ......................................................................9

2) Output Voltage vs. Input Voltage.......................................................................10

3) Dropout Voltage vs. Output Current...................................................................11

4) Output Voltage vs. Temperature .......................................................................11

5) Supply Current vs. Input Voltage ......................................................................12

6) Supply Current vs. Temperature.......................................................................13

7) Dropout Voltage vs. Set Output Voltage ..............................................................13

8) Line Transient Response ...............................................................................14

9) Load Transient Response ..............................................................................15

10) Ripple Rejection .........................................................................................16

TYPICAL APPLICATION

..............................................................................17

PACKAGE DIMENSION

................................................................................17

TAPING SPECIFICATION

.............................................................................18

SMALL PA CKA GE V OLTA GE REGULAT OR

RQ5RW SERIES

OUTLINE

The RQ5RW Series are voltage regulator ICs with high accuracy output voltage and ultra-low supply current developed by

CMOS process. Each of these ICs consists of a voltage reference unit, an error amplifier, resistors for setting output volt-

age and a current limit circuit.

The output voltage of these ICs is fixed with high accuracy.

Even if VOUT is shorted to GND, the included current limit circuit protects the ICs from the destruction.

Furthermore, these ICs have a chip enable function, so that the supply current on standby can be minimized.

Since the package for these ICs are SC-82AB(Super Mini-mold)package, high density mounting of the ICs on boards is pos-

sible.

FEATURES

• Ultra-Low Supply Current....................................TYP. 1.5µA

• Standby Current ...................................................TYP. 0.1µA

• Dropout Voltage....................................................TYP. 40mV (IOUT=1mA, RQ5RW30A/B)

• Low Temperature-Drift Coefficient of

Output Voltage......................................................TYP. ±100ppm/˚C

• Excellent Line Regulation....................................TYP. 0.05%/V

• High Accuracy Output Voltage...........................±2.0%

• Ultra-Small Package ............................................SC-82AB (Super Mini-mold)

• Built-in Current Llimit Circuits

APPLICATIONS

• Power source for battery-powered equipment.

• Power source for cameras, VCRs, camcorders, hand-held audio instruments and hand-held communication equipment.

• Precision voltage references.

RQ5RW

BLOCK DIAGRAM

VOUT

GND

VDD

Vref

Current Limit

VOUT

GND

VDD

–

Vref

Current Limit

–

RQ5RW××ARQ5RW××B

SELECTION GUIDE

The output voltage, the active type, the packing type and the taping type for the ICs can be selected at the user's request.

The selection can be made by designating the part number as shown below:

RQ5RW ××××–×× ← Part Number

↑ ↑↑ ↑

a b c d

Code Contents

aSetting Output Voltage (VOUT) :

Stepwise setting with a step of 0.1V in the range of 2.0V to 6.0V is possible.

Designation of Chip enable Active Type :

b A : “L” active type

B : “H” active type

Designation of Packing Type :

c A : Taping

B : Antistatic bag (for Sample only)

dDesignation of Taping Type :

TR (refer to Taping Specifications)

}

RQ5RW

PIN CONFIGURATION

4 3

(mark side)

• SC-82AB

PIN DESCRIPTION

Pin No. Symbol Pin Description

1 GND Ground Pin

2 VDD Input Pin

3 VOUT Output Pin

4 CE or CE Chip Enable Pin

ABSOLUTE MAXIMUM RATINGS

Symbol Item Rating Unit

VIN Input Voltage 9 V

VCE Input Voltage for CE/CE Pin –0.3 to VIN +0.3 V

VOUT Output Voltage –0.3 to VIN +0.3 V

IOUT Output Current 150 mA

PDPower Dissipation 150 mW

Topt Operating Temperature –40 to +85 ˚C

Tstg Storage Temperature –55 to +125 ˚C

ABSOLUTE MAXIMUM RATINGS

Absolute Maximum ratings are threshold limit values that must not be exceeded even for an instant under

any conditions. Moreover, such values for any two items must not be reached simultaneously. Operation

above these absolute maximum ratings may cause degradation or permanent damage to the device. These

are stress ratings only and do not necessarily imply functional operation below these limits.

RQ5RW

ELECTRICAL CHARACTERISTICS

Symbol Item Conditions MIN. TYP. MAX. Unit

VOUT Output Voltage VIN=5.0V 2.940 3.000 3.060 V

10µA≤IOUT≤10mA

IOUT Output Current VIN=5.0V 50 mA

∆VOUT Load Regulation VIN=5.0V 40 60 mV

∆IOUT 1mA≤IOUT≤50mA

VDIF Dropout Voltage IOUT=1mA 40 60 mV

Iss Supply Current VIN=5.0V 1.5 3.0 µA

Istandby Standby Current VIN=5.0V, VCE=5.0V 0.1 1.0 µA

∆VOUT Line Regulation IOUT=1mA 0 0.05 0.20 %/V

∆VIN VOUT+0.5V≤VIN≤8V

VIN Input Voltage 8.0 V

∆VOUT Output Voltage IOUT=10mA ±100 ppm/˚C

∆Topt Temperature Coefficient –40˚C≤Topt≤85˚C

Ilim Short Current Limit 40 mA

RPU Pull up resistance for CE pin 1.5 4.0 12.0 MΩ

VCEH CE Input Voltage “H” 1.5 V

VCEL CE Input Voltage “L” 0.25 V

Topt=25˚C

• RQ5RW30A

RQ5RW

• RQ5RW30B

Symbol Item Conditions MIN. TYP. MAX. Unit

VOUT Output Voltage VIN=5.0V 2.940 3.000 3.060 V

10µA≤IOUT≤10mA

IOUT Output Current VIN=5.0V 50 mA

∆VOUT Load Regulation VIN=5.0V 40 60 mV

∆IOUT 1mA≤IOUT≤50mA

VDIF Dropout Voltage IOUT=1mA 40 60 mV

Iss Supply Current VIN=5.0V 1.5 3.0 µA

Istandby Standby Current VIN=5.0V, VCE=GND 0.1 1.0 µA

∆VOUT Line Regulation IOUT=1mA 0 0.05 0.20 %/V

∆VIN VOUT+0.5V≤VIN≤8V

VIN Input Voltage 8.0 V

∆VOUT Output Voltage IOUT=1mA ±100 ppm/˚C

∆Topt Temperature Coefficient –40˚C≤Topt≤85˚C

Ilim Short Current Limit 40 mA

RPD Pull down resistance for CE pin 1.5 4.0 12.0 MΩ

VCEH CE Input Voltage “H” 1.5 V

VCEL CE Input Voltage “L” 0.25 V

Topt=25˚C

RQ5RW

ELECTRICAL CHARACTERISTICS BY OUTPUT VOLTAGE

VIN–60 90

VOUT

=2.0V

35 30 45

1mA≤50 75

IOUT

≤35mA

40 60

VIN–

VOUT

=2.0V 35 55

50 40 60

1mA≤

IOUT

≤50mA 30 45

IOUT

=1mA

VIN–

VOUT

=2.0V

65 50 70

1mA≤

IOUT

≤65mA

25 40

VIN–

VOUT

=2.0V

80 60 90

1mA≤

IOUT

≤80mA

RQ5RW20 1.960 2.000 2.040

RQ5RW21 2.058 2.100 2.142

RQ5RW22 2.156 2.200 2.244

RQ5RW23 2.254 2.300 2.346

RQ5RW24 2.352 2.400 2.448

RQ5RW25 2.450 2.500 2.550

RQ5RW26 2.548 2.600 2.652

RQ5RW27 2.646 2.700 2.754

RQ5RW28 2.744 2.800 2.856

RQ5RW29 2.842 2.900 2.958

RQ5RW30 2.940 3.000 3.060

RQ5RW31 3.038 3.100 3.162

RQ5RW32 3.136 3.200 3.264

RQ5RW33 3.234 3.300 3.366

RQ5RW34 3.332 3.400 3.468

RQ5RW35 3.430 3.500 3.570

RQ5RW36 3.528 3.600 3.672

RQ5RW37 3.626 3.700 3.774

RQ5RW38 3.724 3.800 3.876

RQ5RW39 3.822 3.900 3.978

RQ5RW40 3.920 4.000 4.080

RQ5RW41 4.018 4.100 4.182

RQ5RW42 4.116 4.200 4.284

RQ5RW43 4.214 4.300 4.386

RQ5RW44 4.312 4.400 4.488

RQ5RW45 4.410 4.500 4.590

RQ5RW46 4.508 4.600 4.692

RQ5RW47 4.606 4.700 4.794

RQ5RW48 4.704 4.800 4.896

RQ5RW49 4.802 4.900 4.998

RQ5RW50 4.900 5.000 5.100

RQ5RW51 4.998 5.100 5.202

RQ5RW52 5.096 5.200 5.304

RQ5RW53 5.194 5.300 5.406

RQ5RW54 5.292 5.400 5.508

RQ5RW55 5.390 5.500 5.610

RQ5RW56 5.488 5.600 5.712

RQ5RW57 5.586 5.700 5.814

RQ5RW58 5.684 5.800 5.916

RQ5RW59 5.782 5.900 6.018

RQ5RW60 5.880 6.000 6.120

Output Voltage Output Current Load Regulation Dropout Votage

Part Number VOUT(V) IOUT(mA) ∆VOUT/∆IOUT(mV) VDIF(mV)

Conditions

MIN. TYP. MAX.

Conditions

MIN. TYP.

Conditions

TYP. MAX.

Conditions

TYP. MAX.

VIN–

VOUT

=2.0V

10µA≤

IOUT

≤10mA

VIN–

VOUT

=2.0V

Topt=25˚C

RQ5RW

VOUT

GND

VDD

Vref

Current Limit

VOUT

GND

VDD

–

Vref

Current Limit

–

RQ5RW××ARQ5RW××B

Error Amp. Error Amp. R1

OPERATION

In these ICs, Output Voltage VOUT is detected by Feed-back Registers R1, R2, and the detected Output Voltage is compare

with a reference voltage by Error Amplifier, so that a constant voltage is output.

A current limit circuit working for Short Protect and a chip enable circuit are included.

ELECTRICAL CHARACTERISTICS BY OUTPUT VOLTAGE

(common characteristics) Topt=25˚C

Symbol Item Conditions MIN. TYP. MAX. Unit

ISS Supply Current VIN=setVOUT+2.0V 1.5 3.0 µA

VIN=setVOUT+2.0V

Istandby Standby Current VCE=VIN(RQ5RW××A), 0.1 1.0 µA

VCE=GND(RQ5RW××B)

∆VOUT Line Regulation IOUT=1mA 0 0.05 0.20 %/V

∆VIN setVOUT+0.5V≤VIN≤8V

VIN Input Voltage 8.0 V

∆VOUT Output Voltage IOUT=10mA ±100

ppm/

˚C

∆Topt Temperature Coefficient –40˚C≤Topt≤85˚C

Ilim Short Current Limit 40 mA

RPU/RPD

CE Pull-up / CE Pull-down Resistance

1.5 4.0 12.0 MΩ

VCEH CE/CE Input Voltage “H” 1.5 V

VCEL CE/CE Input Voltage “L” 0.25 V

RQ5RW

2VDD VOUT

GND

RQ5RW××B

C1,C2=1µF

VIN C2

IOUT

2VDD VOUT

GND

RQ5RW××B

C1=1µF

VIN

ISS

2VDD VOUT

GND

RQ5RW××B

C2=1µF

VIN

IOUT

P.G.

2VDD VOUT

GND

RQ5RW××B

C1,C2=1µF

VIN C2

1mA

10mA

TEST CIRCUITS

Standard Test Circuit Test Circuit for Supply Current

Test Circuit for Ripple Rejection and Line Transient Response

Test Circuit for Load Transient Response

RQ5RW

RQ5RW30B

3.0

2.5

2.0

1.5

1.0

0.5

0.0

Output Current IOUT(mA)

Output Voltage VOUT(V)

0 20 40 80 100 12060

Topt=25

˚C

8.0V

5.0V

VIN=3.3V

5.5V

RQ5RW30B

3.0

2.5

2.0

1.5

1.0

0.5

0.0

Output Current IOUT(mA)

Output Voltage VOUT(V)

0 30 90 120 15060

=5.0V

Topt=85˚C

25˚C

–40˚C

RQ5RW40B

Output Current IOUT(mA)

Output Voltage VOUT(V)

Topt=25

˚C

3.5

3.0

2.5

2.0

1.5

1.0

0.0

0.5

0 40 80 160120

4.0

6.0V

6.5V

VIN=4.3V

8.0V

RQ5RW50B

Output Current IOUT(mA)

Output Voltage VOUT(V)

Topt=25

˚C

4.0

3.0

2.0

1.0

00 40 120 200160

5.0

7.0V

7.5V

VIN=5.3V

8.0V

RQ5RW50B

Output Current IOUT(mA)

Output Voltage VOUT(V)

=7.0V

4.0

3.0

2.0

1.0

0.0 0 40 120 200160

5.0

Topt=85˚C

25˚C –40˚C

TYPICAL CHARACTERISTICS

1) Output Voltage vs. Output Current

RQ5RW40B

Output Current IOUT(mA)

Output Voltage VOUT(V)

=6.0V

3.5

3.0

2.5

2.0

1.5

1.0

0.0

0.5

0 60 120 180150

4.0

30 90

Topt=85˚C

25˚C –40˚C

RQ5RW

RQ5RW30B

Input Voltage VIN(V)

Output Voltage VOUT(V)

2.96

2.97

2.98

2.99

3.00

3.01

3.02

3.03

3.04

3.05

2.95 345678

Topt=25˚C

IOUT=1mA

RQ5RW40B

Input Voltage VIN(V)

Output Voltage VOUT(V)

Topt=25˚C

4.1

4.0

3.9

3.83.7 3.8 4.1 4.34.2

4.2

4.0

3.9

IOUT=1mA

5mA

10mA

RQ5RW40B

Input Voltage VIN(V)

Output Voltage VOUT(V)

3.96

3.97

3.98

3.99

4.00

4.01

4.02

4.03

4.04

4.05

3.95 45678

Topt=25˚C

IOUT=1mA

RQ5RW30B

Input Voltage VIN(V)

Output Voltage VOUT(V)

Topt=25˚C

3.1

3.0

2.9

2.82.7 2.8 3.1 3.33.2

3.2

3.0

2.9

IOUT=1mA

5mA 10mA

2) Output Voltage vs. Input Voltage

RQ5RW50B

Input Voltage VIN(V)

Output Voltage VOUT(V)

Topt=25˚C

5.1

5.0

4.9

4.84.7 4.8 5.1 5.35.2

5.2

5.0

4.9

IOUT=1mA

5mA

10mA

RQ5RW50B

Input Voltage VIN(V)

Output Voltage VOUT(V)

4.96

4.97

4.98

4.99

5.00

5.01

5.02

5.03

5.04

5.05

4.95 5678

Topt=25˚C

IOUT=1mA

RQ5RW

RQ5RW30B

Output Current IOUT(mA)

Dropout Voltage VDIF(V)

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

1.8

2.0

0.0 0 10 20 30 40 50

Topt=25˚C

85˚C

–40˚C

RQ5RW40B

Output Current IOUT(mA)

Dropout Voltage VDIF(V)

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

1.8

2.0

0.0 0 10 20 30 40 50

Topt=25˚C

85˚C

–40˚C

RQ5RW50B

Output Current IOUT(mA)

Dropout Voltage VDIF(V)

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

1.8

2.0

0.0 0 10 20 30 40 50

Topt=25˚C 85˚C

–40˚C

RQ5RW30B

2.92

2.94

2.96

2.98

3.00

3.02

3.04

3.06

3.08

3.10

2.90

Temperature Topt(˚C)

Output Voltage VOUT(V)

–50 –25 0 25 50 75 100

=5.0V

IOUT=10mA

RQ5RW40B

3.92

3.94

3.96

3.98

4.00

4.02

4.04

4.06

4.08

4.10

3.90

Temperature Topt(˚C)

Output Voltage VOUT(V)

–50 –25 0 25 50 75 100

=6.0V

IOUT=10mA

4) Output Voltage vs. Temperature

3) Dropout Voltage vs. Output Current

RQ5RW

RQ5RW30B

1.2

1.1

1.4

1.3

1.6

1.5

1.8

1.7

2.0

1.9

1.0 3 4 5 6 7 8 9

Topt=25˚C

Input Voltage VIN(V)

Supply Current ISS(µA)

RQ5RW40B

1.2

1.1

1.4

1.3

1.6

1.5

1.8

1.7

2.0

1.9

1.0 456789

Topt=25˚C

Input Voltage VIN(V)

Supply Current ISS(µA)

RQ5RW50B

1.2

1.1

1.4

1.3

1.6

1.5

1.8

1.7

2.0

1.9

1.0 56789

Topt=25˚C

Input Voltage VIN(V)

Supply Current ISS(µA)

RQ5RW50B

4.92

4.94

4.96

4.98

5.00

5.02

5.04

5.06

5.08

5.10

4.90

Temperature Topt(˚C)

Output Voltage VOUT(V)

–50 –25 0 25 50 75 100

=7.0V

IOUT=10mA

5) Supply Current vs. Input Voltage

RQ5RW

RQ5RW40B

1.2

1.1

1.4

1.3

1.6

1.5

1.8

1.7

2.0

1.9

1.0–50 –25 0 25 50 75 100

=6.0V

Temperature Topt(˚C)

Supply Current ISS(µA)

RQ5RW50B

1.2

1.1

1.4

1.3

1.6

1.5

1.8

1.7

2.0

1.9

1.0–50 –25 0 25 50 75 100

=7.0V

Temperature Topt(˚C)

Supply Current ISS(µA)

RQ5RW××B

0.1

0.3

0.2

0.5

0.4

0.7

0.6

0.0 0 1 2 3 4 5 6

Set Output Voltage VREG(V)

Dropout Voltage VDIF(V)

IOUT=10mA

5mA

1mA

RQ5RW30B

1.2

1.1

1.4

1.3

1.6

1.5

1.8

1.7

2.0

1.9

1.0–50 –25 0 25 50 75 100

=5.0V

Temperature Topt(˚C)

Supply Current ISS(µA)

7) Dropout Voltage vs. Set Output Voltage

6) Supply Current vs. Temperature

RQ5RW

RQ5RW40B

4.0

5.0

4.5

6.0

5.5

7.0

6.5

3.50.0 1.0 2.0 3.0 4.0

Time t(ms)

Input Voltage VIN/

Output Voltage VOUT (V)

COUT=1.0µF,IOUT=1mA

Input Voltage

Output Voltage

RQ5RW40B

4.0

5.0

4.5

6.0

5.5

7.0

6.5

3.50.0 1.0 2.0 3.0 4.0

Time t(ms)

COUT=1.0µF,IOUT=10mA

Input Voltage

Output Voltage

Input Voltage VIN/

Output Voltage VOUT (V)

RQ5RW30B

3.0

4.0

3.5

5.0

4.5

6.0

5.5

2.50.0 1.0 2.0 3.0 4.0

Time t(ms)

Input Voltage VIN/

Output Voltage VOUT (V)

COUT=1.0µF,IOUT=1mA

Input Voltage

Output Voltage

RQ5RW30B

3.0

4.0

3.5

5.0

4.5

6.0

5.5

2.50.0 1.0 2.0 3.0 4.0

Time t(ms)

Input Voltage VIN/

Output Voltage VOUT (V)

COUT=1.0µF,IOUT=10mA

Input Voltage

Output Voltage

8) Line Transient Response

RQ5RW50B

5.0

6.0

5.5

7.0

6.5

8.0

7.5

4.50.0 1.0 2.0 3.0 4.0

Time t(ms)

COUT=1.0µF,IOUT=1mA

Input Voltage

Output Voltage

Input Voltage VIN/

Output Voltage VOUT (V)

RQ5RW50B

5.0

6.0

5.5

7.0

6.5

8.0

7.5

4.50.0 1.0 2.0 3.0 4.0

Time t(ms)

COUT=1.0µF,IOUT=10mA

Input Voltage

Output Voltage

Input Voltage VIN/

Output Voltage VOUT (V)

RQ5RW

COUT=Tantalum10µF

RQ5RW30B

5.0

4.5

4.0

3.5

3.0

2.5

2.0

–10

–20

–30

–40

–50

Time t(ms)

Output Voltage VOUT(V)

Output Current IOUT(mA)

0.50.0 1.0 2.0 2.5 3.0 3.5 4.0 4.5 5.01.5

Output Current

Output Voltage

10mA

1mA

COUT=Tantalum10µF

RQ5RW40B

6.0

5.5

5.0

4.5

4.0

3.5

3.0

–10

–20

–30

–40

–50

Time t(ms)

Output Voltage VOUT(V)

Output Current IOUT(mA)

0.50.0 1.0 2.0 2.5 3.0 3.5 4.0 4.5 5.01.5

Output Current

Output Voltage

10mA

1mA

COUT=Tantalum10µF

RQ5RW50B

7.0

6.5

6.0

5.5

5.0

4.5

4.0

–10

–20

–30

–40

–50

Time t(ms)

Output Voltage VOUT(V)

Output Current IOUT(mA)

0.50.0 1.0 2.0 2.5 3.0 3.5 4.0 4.5 5.01.5

Output Current

Output Voltage

10mA

1mA

9) Load Transient Response

RQ5RW

10) Ripple Rejection

RQ5RW50B

Frequency f(kHZ)

Ripple Rejection RR(dB)

0.1 1 10 100

VIN=7VDC+0.5Vp-p

IOUT=10mA

COUT=1µF

RQ5RW30B

Frequency f(kHZ)

Ripple Rejection RR(dB)

0.1 1 10 100

VIN=5VDC+0.5Vp-p

IOUT=10mA

COUT=1µF

RQ5RW40B

Frequency f(kHZ)

Ripple Rejection RR(dB)

0.1 1 10 100

VIN=6VDC+0.5Vp-p

IOUT=10mA

COUT=1µF

RQ5RW

TYPICAL APPLICATION

2VDD VOUT

GND

RQ5RW××B

VIN C2

IOUT

2VDD VOUT

GND

RQ5RW××A

VIN C2

IOUT

In RQ5RW Series, a constant voltage can be obtained without using Capacitor C1 and C2. However, when the wire con-

nected VIN is long, use Capacitor C1. Output noise can be reduced by using Capacitor 2.

Insert Capacitors C1 and C2 with the capacitance of 0.1µF to 0.2µF between Input/Output Pins and GND Pin with mini-

mum wiring.

2±0.2 0.9±0.1

0.3±0.1

1.3±0.2

+0.2

–0.1

1.25

+0.1

–0.06

0.16

2.1±0.3

0 to 0.1

0.1MIN.

0.3±0.1

0.4±0.1

0.05

(0.7)

PACKAGE DIMENSION (Unit : mm)

• SC-82AB

RQ5RW

TAPING SPECIFICATION (Unit : mm)

• SC82AB

T R

User Direction of Feed.

1.6MAX.

0.2±0.1 4.0±0.1

2.0±0.05

4.0±0.1

2.2

2.6

8.0±0.3

1.75±0.1

3.5±0.05

1.5+0.1

–0

RICOH COMPANY, LTD.

ELECTRONIC DEVICES DIVISION

HEADQUARTERS

13-1, Himemuro-cho, Ikeda City, Osaka 563-8501, JAPAN

Phone 81-727-53-1111 Fax 81-727-53-6011

YOKOHAMA OFFICE (International Sales)

3-2-3, Shin-Yokohama, Kohoku-ku, Yokohama City, Kanagawa 222-8530,

JAPAN

Phone 81-45-477-1697 Fax 81-45-477-1694 • 1695

http://www.ricoh.co.jp/LSI/english/

RICOH CORPORATION

ELECTRONIC DEVICES DIVISION

SAN JOSE OFFICE

3001 Orchard Parkway, San Jose, CA 95134-2088, U.S.A.

Phone 1-408-432-8800 Fax 1-408-432-8375