por OF MODEL SERIES 400 Linear Actuation Conductive Plastic Precision Potentiometer / Position Sensor Model # Body Style Termination Style Weight (grams) 423 Round Wire Leads 28 + (16 x mechanical travel) 424 Round Gold Plated Terminals 28 + (16 x mechanical travel) 432 Round with Mounting Flange Wire Leads 38 + (16 x mechanical travel) 434 Round with Mounting Flange Gold Plated Terminals 38 + (16 x mechanical travel) 472 Rectangular Wire Leads 21 + (12 x mechanical travel) 474 Rectangular Gold Plated Terminals 21 + (12 x mechanical travel) 482 Rectangular with Mounting Flange Wire Leads 23 + (12 x mechanical travel) 484 Rectangular with Mounting Flange Gold Plated Terminals 23 + (12 x mechanical travel} pouctaicat Resistance Range, Ohms See Table 1 Standard Resistance Tolerance +10% Minimum Practical Resistance Tolerance +5% Independent Linearity See Table 1 Minimum Practical Independent Linearity See Table 1 Input Voltage, Maximum 400V dc, but not to exceed power rating Power Rating, Watts See Table 1 Dielectric Strength 1,000V rms Insulation Resistance, Minimum 1,000 Megohms Output Smoothness, Maximum 0.1% at 10 to 18/ Minute Actual Electrical Travel, Nominal See Table 1 Electrical Continuity Travel, Minimum Within Mechanical Travel Resolution Essentially infinite Temperature Coefticient* 800 ppm/C *Special tempco available to +100ppm/C. ENVIRONMENTAL (MIL-R-39023) Operating Temperature Range Static: -55C to +125C Dynamic: -40C to +125C Load Life 10 mil. shaft actuations (10% AR) Specifications subject to change without notice. Pp dD O2F MM 1336610 0003315 153 & Si fechnologies 2-17 Model Series 400 Total Mechanical Travel See Table 1 Actuating Force, Maximum 10 oz. Shaft Rotation Continuous Backlash, Maximum .003 Static Stop Strength 10 Ib. Pra Electrical Travel, Inches 0.5 1.0 2.0 3.0 (Ordering #) (-050) (-100} (-200) (-300) Standard Resistance Range, Ohms 1K to 150K 2K to 300K 4K to 600K 8K to 900K Standard Independent Linearity +1.0% +0.75% +0.5% +0.5% Minimum Practical Independent Linearity 0.5% 0.25% 0.25% 0.25% Power Rating, Watts 0.5 0.75 1.0 1.5 Mechanical Travel, Inches 0.6 1.1 2.1 3.1 Electrical Travel, Inches 4.0 5.0 6.0 (Ordering #) (-400) (-500) (-600) Standard Resistance Range, Ohms 1.2K to iMeg 1.5K to 1.3Meg 2K to 1.5Meg Standard independent Linearity +0.5% +0.5% +0.25% Minimum Practical Independent Linearity 0.25% 0.25% 0.15% Power Rating, Watts 2.0 2.5 3.0 Mechanical Travel, Inches 4.1 5.1 6.1 p . D O2F MM 1336610 0003316 O2T mM 551 technologies 2-18 Model Series 400 MODEL SERIES 400 WIRE LEAD MODEL TERMINAL MODEL Made! 423 Model 424 wire Lead << "L" +090 _ + 1000 =.030 |- re Leads. ~_ (Fully | 200 Max. Retracted) t 4 500 20.10 Dia. Dual Single Dual* Single f Solderable L_ 4248 Dia."* Section Section Section Section Terminals WIRE LEAD MODEL TERMINAL MODEL Model 432 Model 434 s| C+ 030 1,000 +.036 je-1.150 Max.-o-| . * (Fully : . Terminals for Dual + 885i--| Wire Leads Section (if required) | Solderable 745 00 _| Petras Max L f 1 t 1 1 t 9-9 9 -\(- _ O- rope et a a we + Lead Wires for Dual* L Mounting Hole vagane . Section (if required) 188 Dia. (Typ. 4 Pies) | M43 + 020 | 188 Typ WIRE LEAD MODEL TERMINAL MODEL Model 472 Model 474 oy 030 4000 .030|-- (Fully = 1.030-~| | 625 j= Retracted) Max. rn f-+) 500 a0 (T : (2-0 - ---o- od Dual* Single Dual* tT Single Solderable 1248 Dia.* t Section Section Section Section Terminals WIRE LEAD MODEL TERMINAL MODEL Model 482 Model 484 L =.030 1.000.030) Wire Leads! ae (Fully ir "\ a 1030 | 825 | L. = vermin Retracted) 1 I fs] Goh OC SES oa Ee bog {-+--| t atl ; ae -O- oO a 3te Oo, pid a Dual* Single val Osage Mounting Hole .136 Dia.(Typ. 4 Pies) | 2248 Section Section Section Section Mag =.020 375 = 010 Notes: Model Elect, Travel] Mech. Travel DimL | Dim*maz | pimmas" | The dimensions for Wire Lead models are the same as the Number Inch #.015 Inch 2.030 Inch #.030 Inch +.020 Inch +.020 Terminal models, except as indicated. 4XX-050 500 560 1.415 1.188 4.750 Housing, Brackets and Caps: Aluminum (Anodized). 4XX-100 4.000 1.060 1.915 1.688 2,250 Wire Leads: #26 lead wire, 12 inch minimum length 4xX-200 2.000 2.060 2.915 2.688 3.250 (Meets MIL-W-16878C). 4XX-300 3.000 3.060 3.915 3.688 4.250 * * Dual Sections and Center Tap are available on special order only. 4XX-400 4.000 4.100 5.000 | 4.688 5.260 * Shafts: Stainless Steel (Passivated). Chamfer is .015 x 45. 4XX-500 5.000 5.100 | 6000 | 5.688 6.250 cs +.0000 AXX-600 6.000 6100 | 7000 | 6.688 7.250 Diameter is 1248 * qg93 * Unspecified Tolerance: + .005. Pp _d O2F ME 1336610 0003317 Thbh Bi technologies 2-19 Model Series 400 SPECIAL FEATURE CODES Center Tap CT Linearity Tape LT Two Gangs (Dual Section) 2G ORDERING INFORMATION 423 600 RA 10K T5 L.25 Xx Model Series ty LL Optional Special Electrical Travel Feature Code(s) Resistance Prefix Linearity i Optional Resistance Value Non- Standard Tolerance CIRCUIT DIAGRAM Green Single Brown (if req'd.) oO _7 Section | yettow Red -______________ Shaitt Extend White/Red Dual : Section White/Yellow (if req'd.) White/Brn (if req'd.) __t White/Green D OcF MM 1336610 0003318 9T2 535i technologies 2-20 Model Series 400 SORPORATION.