1
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
1
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
2012.1.10
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
EMIFILr (Inductor type) Chip Ferrite Bead
BLM18P Series (0603 Size)
c Dimensions
0.4±0.2
1.6±0.15 0.8±0.15
0.8±0.15
(in mm)
: Electrode
c Equivalent Circuit
(Resistance element becomes dominant
at high frequencies.)
c Packaging
Code Packaging Minimum Quantity
D180mm Paper Tape 4000
J330mm Paper Tape 10000
BBulk(Bag) 1000
c Rated Value (p: packaging code)
Part Number Impedance
(at 100MHz/20°C)
Impedance
(at 1GHz/20°C) Rated Current DC Resistance Operating
Temperature Range
BLM18PG300SN1p30ohm (Typ.) - 1000mA 0.05ohm max. -55 to +125°C
BLM18PG330SN1p33ohm ±25% - 3000mA 0.025ohm max. -55 to +125°C
BLM18PG600SN1p60ohm (Typ.) - 500mA 0.10ohm max. -55 to +125°C
BLM18PG121SN1p120ohm ±25% - 2000mA 0.05ohm max. -55 to +125°C
BLM18PG181SN1p180ohm ±25% - 1500mA 0.09ohm max. -55 to +125°C
BLM18PG221SN1p220ohm ±25% - 1400mA 0.10ohm max. -55 to +125°C
BLM18PG331SN1p330ohm ±25% - 1200mA 0.15ohm max. -55 to +125°C
BLM18PG471SN1p470ohm ±25% - 1000mA 0.20ohm max. -55 to +125°C
Number of Circuits: 1
Continued on the following page.
2
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
2
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
2012.1.10
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
Continued from the preceding page.
c Derating of Rated Current
In operating temperature exceeding +85°C,
derating of current is necessary for
BLM18PG series.
Please apply the derating curve shown in
chart according to the operating
temperature.
Derating of Rated Current
Operating Temperature (°C)
Rated Current (mA)
850 125
0
1000
500
1200
1400
2000
3000
1500
c Impedance-Frequency Characteristics (Main Items)
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
600
450
300
150
0
BLM18PG471SN1
BLM18PG331SN1
BLM18PG221SN1
BLM18PG181SN1
BLM18PG121SN1
BLM18PG600SN1
BLM18PG330SN1
BLM18PG300SN1
c Impedance-Frequency Characteristics
BLM18PG300SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
00
10
20
30
40
Z
R
X
c Impedance-Frequency Characteristics
BLM18PG330SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
10
20
30
40
50
c Impedance-Frequency Characteristics
BLM18PG600SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
25
50
75
100
Continued on the following page.
3
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
3
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
2012.1.10
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
Continued from the preceding page.
c Impedance-Frequency Characteristics
BLM18PG121SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
200
150
100
50
0
Z
R
X
c Impedance-Frequency Characteristics
BLM18PG181SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
100
200
300
c Impedance-Frequency Characteristics
BLM18PG221SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
R
X
0
100
200
300
Z
c Impedance-Frequency Characteristics
BLM18PG331SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
X
0
150
300
450
ZR
c Impedance-Frequency Characteristics
BLM18PG471SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
X
0
150
300
450
600
ZR
Continued on the following page.
4
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
4
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
2012.1.10
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
Continued from the preceding page.
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat and deteriorate
the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profi le
where peak solder temperature is below the Tin melting
point is used. Please confi rm the solderability of Tin
plating termination chip before use.
