Darlington Phototransistors PNA2W01M (PN207) Darlington Phototransistor Unit : mm For optical control systems 0.50.1 Features High sensitivity Type number : Emitter mark (Black) 10.0 min. 10.0 min. 3.20.3 3.20.3 o1.8 2.80.2 1.8 2.80.2 0.15 R0.9 0.85 0.15 Absolute Maximum Ratings (Ta = 25C) Parameter Symbol Ratings Unit Collector to emitter voltage VCEO 20 V Emitter to collector voltage VECO 5 V IC 30 mA Collector current Collector power dissipation PC 100 mW Operating ambient temperature Topr -25 to +85 C Storage temperature Tstg -30 to +100 C 0.40.1 45 1.8 1.050.1 Small size designed for easier mounting to printed circuit board 2.20.15 (0.7) 2 Easy to combine with red and infrared light emitting diodes (0.7) 1 1: Collector 2: Emitter Electro-Optical Characteristics (Ta = 25C) Parameter *1 *2 Symbol Conditions Dark current ICEO VCE = 10V Collector photo current ICE(L) VCE = 10V, L = 2 lx*1 min 0.5 typ max 0.1 0.5 3 Unit A mA Peak sensitivity wavelength P VCE = 10V 800 nm Acceptance half angle Measured from the optical axis to the half power point 18 deg. Response time tr, tf*2 VCC = 10V, ICE(L) = 5mA, RL = 100 200 Collector saturation voltage VCE(sat) ICE(L) = 1mA, L = 100 lx*1 0.7 s 1.5 V Measurements were made using a tungsten lamp (color temperature T = 2856K) as a light source. Switching time measurement circuit Sig.IN VCC (Input pulse) Sig.OUT RL ;; ;; 50 (Output pulse) 90% 10% td tr tf td : Delay time tr : Rise time (Time required for the collector photo current to increase from 10% to 90% of its final value) tf : Fall time (Time required for the collector photo current to decrease from 90% to 10% of its initial value) Note) The part number in the parenthesis shows conventional part number. 1 PNA2W01M Darlington Phototransistors PC -- Ta ICE(L) -- VCE 60 40 20 ICE(L) (mA) 80 PC = 100mW 24 Collector photo current ICE(L) (mA) 100 L = 10 lx 16 5 lx 8 10 2 10 1 2 lx 1 lx 20 40 60 80 0 100 Ta (C ) 0 4 8 12 16 Collector to emitter voltage ICEO -- Ta 10 2 Collector photo current 1 10 -1 10 -2 20 40 Ambient temperature 60 80 S (%) 1 Ta (C ) 50 40 30 20 40 80 40 0 200 120 10 5 30 40 50 60 70 400 600 800 1000 1200 Wavelength (nm) Ta (C ) tf -- ICE(L) 10 5 VCC = 10V Ta = 25C 104 VCC = 10V Ta = 25C 104 tr (s) 60 60 tr -- ICE(L) 20 Rise time 70 Relative sensitivity S (%) 90 0 Ambient temperature 100 80 80 tf (s) 10 VCE = 10V Ta = 25C 20 Directivity characteristics 0 10 3 L (lx) Spectral sensitivity characteristics 100 10 10 -1 - 40 100 10 2 10 Illuminance Relative sensitivity ICE(L) (mA) 10 1 VCE (V) VCE = 10V T = 2856K VCE = 10V 0 10 -1 24 ICE(L) -- Ta 10 2 10 -3 - 20 20 RL = 1k 103 500 RL = 1k 103 500 100 100 10 2 Fall time 0 Ambient temperature ICEO (A) VCE = 10V Ta = 25C T = 2856K Ta = 25C T = 2856K 0 - 20 Dark current ICE(L) -- L 10 3 32 Collector photo current Collector power dissipation PC (mW) 120 10 2 80 90 10 10 -2 10 -1 Collector photo current 2 1 10 ICE(L) (mA) 10 10 -2 10 -1 Collector photo current 1 10 ICE(L) (mA) Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR