PART NUMBER PLAN
www.andersonpower.com - 3 -
Wire Protection Housing Arrangement Custom Configuration
(4 Characters) Dash (3 Characters) Dash (3 Characters)
XXXX - XXX - A01
0000 = None Plug Custom Configuration*
PB01 = Max ID 0.217 (5.5mm) P00 - Custom Configuration (Pin & Wire Sealing Grommets)
PB02 = Max ID 0.256 (6.5mm) P41 = 3 each #16 to #14 AWG (PM16P1416S30 Pin & 114916P3 Wire Sealing Grommet)
P42 = 3 each #20 to #16 AWG (PM16P1620S30 Pin & 114916P2 Wire Sealing Grommet)
P43 = 3 each #24 to #20 AWG (PM16P2024S30 Pin & 114916P1 Wire Sealing Grommet)
Receptacle
S00 - Custom Configuration (Socket & Wire Sealing Grommets)
S41 = 3 each #16 to #14 AWG (PM16S1416S32 Socket & 114916P3 Wire Sealing Grommet)
S42 = 3 each #20 to #16 AWG (PM16S1620S32 Socket & 114916P2 Wire Sealing Grommet)
S43 = 3 each #24 to #20 AWG (PM16S2024S32 Socket & 114916P1 Wire Sealing Grommet)
Part Numbering Notes:
1. To Order Mini 3 Pole SPEC Pak™
shell kits only (no contacts or wire sealing grommets), use part numbering on page 2 only. Contacts, wire seals
and wire protection may be ordered separately.
2. To order customer configured Mini 3 Pole SPEC Pak™
connectors (including contacts, wire sealing grommet and wire protection) use Part Number
Plan across the top of page 2 and 3. Customer configured Mini 3 Pole SPEC Pak™ Plug connector example: SK6-016M03PB01-P41
ORDERING INFORMATION
NOTE:
1. Pre-mate 9.3 contacts can not be used.
2. For IP68 sealing of custom configurations, order 1 wire seal for every 1
pin and/or socket contact that is ordered.
* Custom configuration may not be UL recognized.
NOTE :
1. For IP68 sealing of custom configurations, order 1 wire seal for every 1
pin and/or socket contact that is ordered.
Socket Contacts
- Wire -
AWG mm²
PM16S2024S32 #24 / 20 0.50 / 0.75
PM16S1620S32 #20 / 16 0.50 / 1.5
PM16S1416S32
PM16S2024S32-50
PM16S1620S32-50
PM16S1416S32-50 #16 / 14 1.5 / 2.5
Housing
Arrangement
Designation
S43
S42
S41
Standard Qty 500 Packaged Qty 50
----------------- APP® Part Number -----------------
PM16P2024C30 #24 / 20 0.50 / 0.75
PM16P1620C30 #20 / 16 0.50 / 1.5
PM16P1416C30 #16 / 14 1.5 / 2.5
Pin Contacts
- Wire -
AWG mm²
PM16P2024S30 #24 / 20 0.50 / 0.75
PM16P1620S30 #20 / 16 0.50 / 1.5
PM16P1416S30 #16 / 14 1.5 / 2.5
PM16P2024B30 #24 / 20 0.50 / 0.75
PM16P1620B30 #20 / 16 0.50 / 1.5
PM16P1416B30 #16 / 14 1.5 / 2.5
Housing
Arrangement
Designation
Standard Length 7.7mm
Post-Mate 6.6mm
P00
P00
P00
P43
P42
P41
Pre-Mate 8.5mm
P00
P00
P00
Standard Qty 500 Packaged Qty 50
PM16P2024C30-50
PM16P1620C30-50
PM16P1416C30-50
PM16P2024S30-50
PM16P1620S30-50
PM16P1416S30-50
PM16P2024B30-50
PM16P1620B30-50
PM16P1416B30-50
----------------- APP® Part Number -----------------
Tooling
Part Number Description
PM1000G1 Four Indent Hand Crimp Tool for Pins and Sockets
TM0001 Mil Standard Hand Crimp Tool (Locator/Turret Required)
TP0001 Pneumatic Crimp Tool (Locator/Turret Required)
TL0001 Pin Locator/Turret for TM0001 or TP0001
TL0002 Socket Locator/Turret for TM0001 or TP0001
PM1001G1 Loose Piece Crimp Machine (Semi automatic)
PM1002G1 Contact Insertion Tool
PM1003G1 Contact Extraction Tool
PM1000G1
TM0001
When purchasing the following part numbers, it will be considered
a custom configuration
* Custom configured Mini 3 Pole SPEC Pak™ Plug connector example: SK6-016M03PB01-P00-A01