SURFACE MOUNT DISPLAY APSC03-41SRWA SUPER BRIGHT RED Features !0.3 INCH !LOW Description DIGIT HEIGHT. The Super Bright Red source color devices are made CURRENT OPERATION. !EXCELLENT CHARACTER APPEARANCE. Diode. !I.C. COMPATIBLE. !MECHANICALLY !GRAY with Gallium Aluminum Arsenide Red Light Emitting RUGGED. FACE,WHITE SEGMENT. !PACKAGE : 1100PCS / REEL. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: DSAB2950 APPROVED : J. Lu REV NO: V.1 CHECKED :Joe Lee DATE: MAY/19/2002 DRAWN:L.ZHANG PAGE: 1 OF 5 Selection Guide Par t No . Dic e APSC03-41SRWA L en s Ty p e SUPER BRIGHT RED (GaAlAs) Iv (m c d ) @ 10 m A D es c r i p t i o n Min . Ty p . 8 15.9 WHITE DIFFUSED Common Cathode,Rt. Hand Decimal Electrical / Optical Characteristics at T)=25C Sy m b o l Par am et er peak D 1/2 D ev i c e Ty p . Peak Wavelength Super Bright Red Dominate Wavelength Un it s Tes t Co n d it io n s 660 nm I F =20mA Super Bright Red 6 40 nm I F =20mA Spectral Line Half-width Super Bright Red 20 nm I F =20mA pF VF=0V;f=1MHz 2.5 V I F =20mA 10 uA V R = 5V C Capacitance Super Bright Red 45 VF Forward Voltage Super Bright Red 1.85 IR Reverse Current Super Bright Red Max . Absolute Maximum Ratings at T)=25C P ar am e t e r S u p er B r i g h t R ed Un it s Power dissipation 100 mW DC Forward Current 30 mA Peak Forward Current [1] 155 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB2950 APPROVED : J. Lu REV NO: V.1 CHECKED :Joe Lee DATE: MAY/19/2002 DRAWN:L.ZHANG PAGE: 2 OF 5 Super Bright Red SPEC NO: DSAB2950 APPROVED : J. Lu APSC03-41SRWA REV NO: V.1 CHECKED :Joe Lee DATE: MAY/19/2002 DRAWN:L.ZHANG PAGE: 3 OF 5 APSC03-41SRWA SMT Reflow Soldering Instruction Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) SPEC NO: DSAB2950 APPROVED : J. Lu REV NO: V.1 CHECKED :Joe Lee DATE: MAY/19/2002 DRAWN:L.ZHANG PAGE: 4 OF 5 Tape Specification (Units : mm) SPEC NO: DSAB2950 APPROVED : J. Lu REV NO: V.1 CHECKED :Joe Lee DATE: MAY/19/2002 DRAWN:L.ZHANG PAGE: 5 OF 5