5-1-1 Unicolor lamps 5mm Pitch Lead Bow Shaped LEDs SEL5023 Series (available as Direct Mount) Forward Voltage Part Number SEL5223S SEL5823A SEL5923A SEL5723C SEL5423E SEL5523C SEL5E23C SELK5E23C-D SELU5223C-S SELU5823A-S SELS5B23C SELU5923C-S SELU5723C * SELT5D23C-S SELS5L23C-S SELT5E23C-S Emitting Color Lens Color Red Amber Orange Yellow Green Pure green Blue High luminosity Blue Red Amber Light amber Ultrahigh Orange luminosity Yellow Pure green Aqua blue Blue Transparent red Transparent orange Transparent orange Water clear Transparent green Water clear Water clear Water clear Water clear Transparent orange Water clear Water clear Water clear Water clear Water clear Water clear TYP 1.9 1.9 1.9 2.0 2.0 2.0 4.0 3.6 2.0 2.0 2.0 2.0 2.0 3.3 3.6 3.3 Luminous Intensity Peak Wavelength Conditions IF (mA) VF (V) MAX 2.5 2.5 2.5 2.5 2.5 2.5 4.8 4.0 2.5 2.5 2.5 2.5 2.5 4.0 4.0 4.0 10 10 10 10 10 10 20 20 20 20 20 20 20 20 20 20 Iv Conditions (mcd) IF (mA) TYP 25 20 35 20 35 20 60 20 40 20 13 20 20 20 60 20 100 20 200 20 135 20 145 20 155 20 600 10 600 20 130 10 P Conditions (nm) IF (mA) TYP 630 10 610 10 587 10 570 10 560 10 555 10 430 20 468 20 635 20 611 20 600 20 591 20 572 20 512 20 483 20 460 20 Dominant Wavelength Spectrum Half Bandwidth d Conditions (nm) IF (mA) TYP 620 10 605 10 590 10 571 10 567 10 559 10 466 20 470 20 625 20 605 20 596 20 590 20 571 20 520 20 487 20 465 20 (nm) TYP 35 35 33 30 20 20 65 30 15 17 15 15 15 35 30 25 Conditions IF (mA) 10 10 10 10 10 10 20 20 20 20 20 20 20 20 20 20 Chip Material GaAsP GaAsP GaAsP GaP GaP GaP GaN GaN on Si AlGaInP AlGaInP AlGaInP AlGaInP AlGaInP InGaN InGaN InGaN * Mass production in preparation External Dimensions Directional Characteristics (representative example) (Unit: mm) Cathode mark Resin burr 0.3max Resin heap 0.8max Dimensional Tolerance: 0.3 6.00.2 3.60.2 30 30 30 3.9 30 0 5.80.5 0 3.1 50 90 100% 90 100% 50 0 50 90 100% 0.5+0.1 (5.0) 1.4 0.50.1 Cathode 0 60 3.6 50 60 1.0min 90 100% 60 23.0min 0.65max 60 6.2 Product Mass: Approx. 0.23 g LEDs 243 5-1 Visible Light LEDs Absolute Maximum Ratings Visible Light Unicolor Lamp Parameter Unit PD IF IF IFP VR Top Tstg mW mA mA/C mA V C C Ratings GaP GaAsP GaAlAs AlGaInP InGaN 75 Conditions GaN 120 30 -0.45 25C or higher f=1kHz, tw100 s 70 100 3 5 -30 to +80 -30 to +85 -30 to +100 Visible Light Bicolor Lamp Parameter Unit PD IF IF IFP VR Top Tstg mW mA mA/C mA V C C GaP Ratings GaAlAs GaAsP 75 AlGaInP Conditions InGaN 120 Same conditions for simultaneous lighting 30 -0.45 100 25C or higher f=1kHz, tw100 s 4 5 -30 to +85 -30 to +100 Visible Light Unicolor Surface Mount LEDs Parameter Unit IF IF IFP VR Top Tstg mA mA/C mA V C C Ratings GaP GaAsP GaAlAs AlGaInP InGaN Conditions GaN 20 -0.27 70*2 30 -0.45 100*1 25C or higher f=1kHz, tw100 s 5 3 -30 to +85 -30 to +100 -30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series Visible Light Bicolor Surface Mount LEDs Ratings Parameter Unit PD mW IF IF IFP VR Top Tstg mA mA/C mA V C C Conditions SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 -0.45 70 4 -30 to +85 -30 to +100 25C or higher f=1kHz, tw100 s Visible Light Three Element Surface Mount LEDs Parameter 218 PD mW IF IF IFP VR Top Tstg mA mA/C mA V C C LEDs Ratings SECT3M02C-S Unit Conditions Red Green/Blue 75 120 30 -0.45 50 70 5 -30 to +80 -30 to +100 When one chip lights up (same as green/blue for simultaneous lighting) 25C or higher f=1kHz, tw100 s