COMMUNICATION COMPONENTS 1xN Optical Switch SCN Series Key Features * Low insertion loss * Built-in position monitor * Latching and non-latching configurations * High durability Applications * Configurable optical add/drop multiplexing * Optical network protection and restoration * Network monitoring * Transmitter and receiver equipment protection JDSU SCN series 1XN Optical Switch is the ideal switching solution to increase network flexibility. The switch can be mounted directly on printed circuit boards (PCBs). Its advanced mirror and prism design minimizes insertion loss and provides maximum reliability under demanding central office conditions. The switch is also equipped with status contacts, providing an electrical readout of the switch position to facilitate monitoring, and a latching configuration to ensure the switch remains in position following a power loss. On request, JDSU provides customized modular assemblies that incorporate taps, WDMs, splitters, and other components. Compliance * Telcordia GR-1073 NORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com 1XN OPTICAL SWITCH 2 Dimensions Diagram (Specifications in mm unless otherwise noted.) 8.4 Pinout 15 6.75 4X 4-40UNC 2.54 6 17.55 Pin Description Function 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 +5 V DC AGND NC NC A0 A1 A2 NC NC NC B0 B1 B2 NC NC NC Power supply Analog ground No connection No connection Control input Control input Control input No connection No connection No connection Status output Status output Status output No connection No connection No connection 2 1 2.54 53 15 20 60 16 20 15.5 3.70 93 100 1x4 Switch Note: Pins 7 and 13 are not used for 1x4 switch 15 8.4 6.8 2.54 4X 4-40UNC 6 27.6 5 TYP 1 2 2.54 73 15 8X5=40 80 16 15.5 20 103 110 1x8 Switch 3.7 1XN OPTICAL SWITCH 3 Configurations Selected Port Control Signals A2 A1 A0 Status Signals B2 B1 B0 1 2 3 4 5 6 7 8 0 0 0 0 0 1 0 1 0 0 1 1 1 0 0 1 0 1 1 1 0 1 1 1 0 0 0 0 0 1 0 1 0 0 1 1 1 0 0 1 0 1 1 1 0 1 1 1 Specifications Parameter Wavelength range Insertion loss1,2 Switching time Crosstalk1 Return loss1 Polarization dependent loss (PDL)1 Repeatability Supply voltage Drive frequency Operating temperature Storage temperature Fiber type Dimensions 1x4 Switch Maximum Maximum Minimum Minimum Maximum Maximum Maximum 1x5, 1x6, 1x7, 1x8 Switch 1290 to 1330 nm and/or 1525 to 1610 nm 0.9 dB 1.3 dB 6 ms 8 ms 55 dB 55 dB 50 dB 50 dB 0.1 dB 0.2 dB 0.05 dB 0.05 dB 4.5 to 5.5 V DC 4.5 to 5.5 V DC 10 Hz 10 Hz 0 to 70 C 0 to 70 C -40 to 85 C -40 to 85 C 900 m tight buffer 900 m tight buffer 100 x 60 x 15 mm 110 x 80 x 15 mm 1. Excluding connectors. 2. Defined at room temperature and 1310/1550 nm. Add additional 0.5 dB over whole temperature and wavelength range. 1XN OPTICAL SWITCH Ordering Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at customer.service@jdsu.com. Sample: SCN-0013L10 SCN-00 1 Code 1 Input Port Number 1 Code 3 4 5 6 7 8 Output Port Number 3 4 5 6 7 8 NORTH AMERICA : 800 498-JDSU (5378) Code L N Switching Type Latching Non-latching Code 1 2 Fiber Length 1 meter 2 meters WORLDWIDE : +800 5378-JDSU Code 0 1 2 3 4 5 6 Connector Type No connector FC/PC FC/APC SC/PC SC/APC LC/PC MU WEBSITE : www.jdsu.com Product specifications and descriptions in this document subject to change without notice. (c) 2007 JDS Uniphase Corporation 30149043 Rev. 002 08/07 SCNSWITCH.DS.CC.AE Telcordia is a registered trademark of Telcordia Technologies Incorporated. August 2007