12-22/R6GHC-A33/2C - Everlight International Corp.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 1 of 12

Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao

Technical Data Sheet

Right Angle Lens Chip LEDs with Bi-Color(Multi-Color)

12-22/R6GHC-A33/2C

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow

solder process.

․Multi-color type.

․Pb-free.

․The product itself will remain within RoHS compliant version.

Descriptions

․The 12-22 SMD LED is much smaller

than lead frame type components, thus

enable smaller board size, higher packing

density, reduced storage space and finally

smaller equipment to be obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Backlighting in dashboard and switch.

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

Device Selection Guide

Chip

Emitted Color Resin Color

Type Material

R6 AlGaInP Brilliant Red

Water Clear

GH InGaN Brilliant Green

12-22/R6GHC-A30/2C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 2 of 12

Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao

Package Outline Dimensions

Note: The tolerances unless mentioned is ±0.1mm,Unit = mm

12-22/R6GHC-A30/2C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 3 of 12

Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao

Absolute Maximum Ratings (Ta=25℃

℃℃

℃)

Parameter Symbol Rating Unit

Reverse Voltage V

R

5 V

Forward Current I

F

R6:25

GH:25 mA

Peak Forward Current

(Duty 1/10 @1KHz) I

FP

R6:60

GH:100 mA

Power Dissipation Pd R6:60

GH:95 mW

Electrostatic Discharge(HBM)

ESD R6:2000

GH:150 V

Operating Temperature Topr -40 ~ +85 ℃

Storage Temperature Tstg -40 ~ +90 ℃

Soldering Temperature Tsol

Reflow Soldering : 260 ℃ for 10 sec.

Hand Soldering : 350 ℃ for 3 sec.

12-22/R6GHC-A30/2C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 4 of 12

Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao

Electro-Optical Characteristics (Ta=25℃

℃℃

℃)

Parameter

Symbol

Min. Typ. Max. Unit

Condition

Luminous Intensity Iv

R6

GH

72.0

112

----

180

285 mcd

I

F

=20mA

Viewing Angle 2θ1/2

----- 120 ----- deg

Peak Wavelength λp

R6

GH

----- 632

518 ----- nm

Dominant Wavelength

λd

R6

GH

617.5

517.5

-----

633.5

529.5

nm

Spectrum Radiation

Bandwidth

△λ

R6

GH

-----

20

35

-----

nm

Forward Voltage V

F

R6

GH

1.7

2.7

2.0

3.3

2.4

3.7

V

Reverse Current I

R

R6

GH

----- ----- 10

50

μA V

R

=5V

Notes:

1.Tolerance of Luminous Intensity ±

±±

±11%

2.Tolerance of Dominant Wavelength ±

±±

±1nm

12-22/R6GHC-A30/2C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 5 of 12

Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao

Bin Range Of Luminous Intensity

R6

Bin Min Max Unit Condition

Q 72.0 112

mcd I

F

=20mA

R 112 180

GH

Bin Min Max Unit Condition

R 112 180 mcd I

F

=20mA

S 180 285

Bin Range Of Dom. Wavelength

R6

Group Bin Min Max Unit Condition

A

E4 617.5 621.5

nm I

F

=20mA

E5 621.5 625.5

E6 625.5 629.5

E7 629.5 633.5

GH

Group Bin Min Max Unit Condition

C

B10 517.5 519.5

nm I

F

=20mA

B11 519.5 521.5

B12 521.5 523.5

B13 523.5 525.5

B14 525.5 527.5

B15 527.5 529.5

Notes:

1.Tolerance of Luminous Intensity ±

±±

±11%

2.

Tolerance of Dominant Wavelength: ±

±±

±1nm

12-22/R6GHC-A30/2C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 6 of 12

Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao

Typical Electro-Optical Characteristics Curves

R6

Relative luminous intensity

Ambient Temperature T (°C )

a

% )

(Relative luminous intensity()%

Wavelength λ(nm)

Ta=25°C

Forward Voltage V (V)

F

Forward Current I (mA)

Relative luminous intensity ()%

Forward Current I (mA)

Ta=25°C

Ambient Temperature T (°C

a)

Forward Current I (mA)

Ta=25°C

0°

0.5 0.3 0.1

0.7

0.8

0.9

1.0

40°

80°

0.60.2 0.4

90°

70°

60°

50°

10° 20°

30°

Ta=25°C

12-22/R6GHC-A30/2C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 7 of 12

Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao

Typical Electro-Optical Characteristics Curves

GH

Relative luminous intensity

Ambient Temperature T (°C )

a

% )

(Relative luminous intensity()%

Wavelength λ(nm)

Ta=25°C

Forward Voltage V (V)

F

Forward Current I (mA)

Relative luminous intensity ()%

Forward Current I (mA)

Ta=25°C

Ambient Temperature T (°C

a)

Forward Current I (mA)

Ta=25°C

0°

0.5 0.3 0.1

0.7

0.8

0.9

1.0

40°

80°

0.60.2 0.4

90°

70°

60°

50°

10° 20°

30°

Ta=25°C

12-22/R6GHC-A30/2C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 8 of 12

Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao

Label explanation

CAT: Luminous Intensity Rank

HUE: Dom. Wavelength Rank

REF: Forward Voltage Rank

Reel Dimensions

Note: The tolerances unless mentioned is ±0.1mm, Unit = mm

RoHS

Pb

CPN :

P N : XXXXXXXXXXXXX

XXXXXXXXXXXXX

QTY : XXX

LOT NO : XXXXXXXXXX

Reference : XXXXXXXX

CAT : XXX

HUE : XXX

REF : XXX

EVERLIGHT

MADE IN TAIWAN

12-22/R6GHC-A30/2C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 9 of 12

Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao

Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel

Note: The tolerances unless mentioned is ±0.1mm, Unit = mm

Moisture Resistant Packaging

Label Desiccant Label

Aluminum moisture-proof bag

12-22/R6GHC-A30/2C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 10 of 12

Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.

Confidence level：90%

LTPD：10%

No. Items Test Condition Test

Hours/Cycles

Sample

Size Ac/Re

1 Reflow Soldering Temp. : 260℃±5℃

Min. 5sec. 6 Min. 22 PCS.

0/1

2 Temperature Cycle

H : +100℃ 15min

∫ 5 min

L : -40℃ 15min

300 Cycles

22 PCS.

0/1

3 Thermal Shock

H : +100℃ 5min

∫ 10 sec

L : -10℃ 5min

300 Cycles

22 PCS.

0/1

4 High Temperature

Storage Temp. : 100℃ 1000 Hrs. 22 PCS.

0/1

5 Low Temperature

Storage Temp. : -40℃ 1000 Hrs. 22 PCS.

0/1

6 DC Operating Life I

F

= 20 mA 1000 Hrs. 22 PCS.

0/1

7 High Temperature /

High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS.

0/1

12-22/R6GHC-A30/2C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 11 of 12

Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection , otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.

If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

12-22/R6GHC-A30/2C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 12 of 12

Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds

within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do

soldering of each terminal. Be careful because the damage of the product is often started at the time of the

hand solder.

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a

double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether

the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306

Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com