PTFA091203EL Thermally-Enhanced High Power RF LDMOS FETs 120 W, 920 - 960 MHz Description The PTFA091203EL is a 120-watt, internally-matched FET intended for use in power amplifier applications in the 920 to 960 MHz band. This device features internal I/O matching and thermally-enhanced open cavity ceramic package. Manufactured with Infineon's advanced LDMOS process, this device provides excellent thermal performance and superior reliability.. PTFA091203EL Package H-33288-6 t c u Features Two-carrier WCDMA Performance 3GPP signal, 10 MHz carrier spacing, BW = 3.84 MHz, PAR = 8 dB VDD = 30 V , IDQ = 1.05 A -20 -25 -45 -50 -55 30 IMD Up n o sc di 32 34 36 Typical two-carrier WCDMA performance, 960 MHz, 30 V - Average output power = 28 W - Gain = 17 dB - Efficiency = 27% - Intermodulation Distortion = -36 dBc 35 25 -40 * d e u n ti Efficiency -30 -35 Broadband internal matching 40 960 MHz 940 MHz 920 MHz 38 20 15 10 IMD Low Drain Efficiency (%) Intermodulation Distortion (dBc) -15 5 0 40 42 44 46 48 d o r p * * Typical CW performance, 960 MHz, 30 V - Output power at P1dB = 140 W - Gain = 17 dB - Efficiency = 54% * Integrated ESD protection: Human Body Model, Class 2 (minimum) * Excellent thermal stability, low HCI drift * Capable of handling 10:1 VSWR @ 30 V, 120 W (CW) output power * Pb-free and RoHS-compliant Output Power (dBm) RF Characteristics Two-carrier WCDMA Measurements (not subject to production test--verified by design/characterization in Infineon test fixture) VDD = 30 V, IDQ = 1050 mA, POUT = 28 W Avg 1 = 950 MHz, 2 = 960 MHz, 3GPP signal, channel bandwidth = 3.84 MHz, peak/average = 8.0 dB @ 0.01% CCDF Characteristic Symbol Min Typ Max Unit Gain Gps -- 17 -- dB Drain Efficiency hD -- 27 -- % Intermodulation Distortion IMD -- -36 -- dBc All published data at TCASE = 25C unless otherwise indicated ESD: Electrostatic discharge sensitive device--observe handling precautions! Data Sheet - DISCONTINUED 1 of 10 Rev. 06, 2013-05-16 PTFA091203EL RF Characteristics (cont.) Two-tone Measurements (tested in Infineon test fixture) VDD = 30 V, IDQ = 1050 mA, POUT = 110 W PEP, = 960 MHz, tone spacing = 1 MHz Characteristic Symbol Min Typ Max Unit Gain Gps 17 18 -- dB Drain Efficiency hD 38 40 -- % Intermodulation Distortion IMD -- -30 -28 dBc Typ Max Unit -- ct -- V -- 1.0 A -- 10.0 A DC Characteristics Characteristic Conditions Symbol Min Drain-Source Breakdown Voltage VGS = 0 V, IDS = 10 mA V(BR)DSS 65 Drain Leakage Current VDS = 28 V, VGS = 0 V IDSS -- Drain Leakage Current VDS = 63 V, VGS = 0 V IDSS -- On-State Resistance VGS = 10 V, VDS = 0.1 V Operating Gate Voltage Gate Leakage Current Maximum Ratings ed u d o r p RDS(on) -- 0.07 -- W VDS = 30 V, IDQ = 1050 mA VGS 2.0 2.5 3.0 V VGS = 10 V, VDS = 0 V IGSS -- -- 1.0 A u n ti n o Parameter Symbol Value Drain-Source Voltage VDSS 65 V Gate-Source Voltage VGS -0.5 to +12 V Junction Temperature TJ 200 C Storage Temperature Range TSTG -40 to +150 C Thermal Resistance (TCASE = 70C, 120 W CW) RqJC 0.42 sc di Unit C/W Ordering Information Type and Version Package Type Package Description Shipping PTFA091203EL V4 H-33288-6 Thermally-enhanced slotted flange, single-ended Tray PTFA091203EL V4 R250 H-33288-6 Thermally-enhanced slotted flange, single-ended Tape & Reel, 250 pcs Data Sheet - DISCONTINUED 2 of 10 Rev. 06, 2013-05-16 PTFA091203EL Typical Performance (data taken in a production test fixture) Two-tone Drive Up CW Conditions VDD = 30V, IDQ = 1.05 A 20 ct 16 47 ed 36 49 Average Output Power (dBm) n o sc Z Source di D 0. 40 42 Z Load G S 44 46 Z Source 970 MHz Z Load W R jX R jX 910 1.42 -2.36 2.43 -3.11 920 1.40 -2.21 2.41 -2.97 930 1.38 -2.07 2.39 -2.83 940 1.35 -1.92 2.37 -2.68 950 1.33 -1.78 2.36 -2.54 960 1.32 -1.64 2.34 -2.40 970 1.30 -1.50 2.33 -2.26 Z Load 0. 6 970 MHz 910 MHz 0.1 0. 2 0. 3 Rev. 06, 2013-05-16 .4 5 0 0. 3 of 10 0. Data Sheet - DISCONTINUED 45 0 0. 5 MHz 52 E W AV <--- Z Source W 10 50 Z0 = 50 910 MHz Frequency 48 Output Power (dBm) - W AV E LE NGT H S T OW A Broadband Circuit Impedance u n ti 38 0.0 45 R --> 43 RA T O 41 RD G E NE 39 W ARD LOA D T HS T O L E NG 37 0 .1 15 0 35 0. 2 -65 20 45 Nornalized to 50 Ohms 5 -60 30 0.4 10 17 5 15 0.3 -55 u d o r p ptfa091203ef 20 IMD3 -50 40 0. 0 -45 Gain 0.1 25 3 -40 Gain (dB) 30 ga091203ef Sept. 2, 2010 12:02:32 PM 18 -35 33 50 5 Drain Efficiency (%) 19 0. 40 35 0. -30 4 -25 60 Efficiency 960 MHz 940 MHz 920 MHz Drain Efficiency (%) 45 Efficiency 960 MHz 940 MHz 920 MHz 0.2 -20 0. Intermodulation Distortion (dBc) VDD = 30V, IDQ = 1.05 A PTFA091203EL Reference Circuit C802 100000 pF S3 8 C804 10000 R804 10 Ohm R802 10 Ohm S1 In Out 2 3 R805 1200 Ohm 3 1 NC NC 4 6 7 C103 33 pF TL101 C104 10000 pF TL131 TL113 TL129 3 1 C105 4710000 pF 2 TL128 3 1 TL109 TL118 TL115 R101 10 Ohm 2 RF_IN 2 1 TL108 3 2 1 2 TL124 TL103 TL132 TL135 1 TL130 2 2 TL119 TL120 c s i TL134 GATE DUT (Pin A) 1 3 C106 5.1 pF C107 6.2 pF n o TL104 TL111 TL114 3 1 a 0 9 1 2 0 3 e l _ b d i n _ 0 9 - 0 7 - 2 0 1 0 3 TL106 t c u TL116 TL126 d o pr 2 TL136 TL105 TL125 3 1 TL133 E C102 10000 pF 3 R103 10 Ohm C108 33 pF TL117 TL121 R801 1300 Ohm d e u n ti TL123 TL110 TL122 3 C101 4.7 pF TL127 3 1 TL107 TL102 TL112 2 S B R102 5100 Ohm C 4 1 C803 10000 C801 100000 pF S2 2 R803 1000 Ohm C805 10000 pF 5 Reference circuit input schematic for = 960 MHz d C204 10000000 pF TL227 TL222 1 TL224 C203 10000000 pF C201 1000000 pF C205 10000000 pF TL223 2 3 2 3 C202 10000000 pF TL225 3 3 1 1 2 1 2 VDD 4 C211 20000 pF TL226 DUT (Pin D) C214 1.5 pF TL212 TL204 DRAIN DUT (Pin C) TL219 TL207 TL209 TL218 2 C212 33 pF TL205 TL201 TL206 TL221 TL202 TL210 TL211 3 1 TL213 TL220 RF_OUT 4 TL203 C213 1.5 pF DUT (Pin D) C215 20000 pF TL208 TL216 2 TL217 2 3 1 TL228 TL215 2 3 1 2 C206 10000000 pF 1 a 0 9 1 2 0 3 e l _ b d o u t _ 0 9 - 0 7 - 2 0 1 0 3 1 3 4 C210 10000000 pF TL214 C209 10000000 pF C208 1000000 pF C207 10000000 pF VDD Reference circuit output schematic for = 960 MHz Data Sheet - DISCONTINUED 4 of 10 Rev. 06, 2013-05-16 PTFA091203EL Reference Circuit (cont.) Description DUT PCB PTFA091203EL 0.760 mm [.030"] thick, er = 3.48, Rogers 4350, 1 oz. copper Electrical Characteristics at 960 MHz Transmission Electrical Line Characteristics Dimensions: mm Dimensions: mils W = 0.762 W = 30 W = 600, L = 405 Input TL101, TL102, TL122, TL123, TL124 TL103 0.059 , 8.94 W = 15.240, L = 10.287 TL104, TL106 0.040 , 51.58 W = 1.651, L = 7.620 TL105 0.086 , 38.82 W = 2.540, L = 15.900 TL107 0.007 , 78.27 W = 0.762, L = 1.270 TL108 0.002 , 38.82 W = 2.540, L = 0.330 TL109 0.015 , 78.27 W = 0.762, L = 2.921 TL110 0.098 , 78.27 W = 0.762, L = 19.050 TL111 0.004 , 51.58 W = 1.651, L = 0.762 TL112 0.026 , 78.27 TL113 0.014 , 36.29 TL114 0.039 , 8.94 TL115 0.033 , 51.58 TL116 0.001 , 36.29 W = 30, L = 50 W = 100, L = 13 W = 30, L = 115 W = 30, L = 750 W = 65, L = 30 W = 30, L = 200 W = 110, L = 104 W = 15.240, L = 6.731 W = 600, L = 265 W = 1.651, L = 6.302 W = 65, L = 248 W = 2.794, L = 0.254 W = 110, L = 10 W = 1.651, L = 1.270 W = 65, L = 50 W = 1.651 W = 65 0.011 , 36.29 W1 = 2.794, W2 = 2.794, W3 = 2.032 W1 = 110, W2 = 110, W3 = 80 n o sc di u n ti W = 100, L = 626 W = 2.794, L = 2.642 TL118, TL119, TL120, TL121 TL125, TL126, TL127, TL128 d o r p W = 65, L = 300 W = 0.762, L = 5.080 0.007 , 51.58 TL117 ed t c u 0.012 , 36.29 W1 = 2.794, W2 = 2.794, W3 = 2.286 W1 = 110, W2 = 110, W3 = 90 TL130 0.015 , 8.94 W1 = 15.240, W2 = 15.240, W3 = 2.540 W1 = 600, W2 = 600, W3 = 100 TL132 0.004 , 8.94 W1 = 15.240, W2 = 15.240, W3 = 0.762 W1 = 600, W2 = 600, W3 = 30 TL133 0.000 , 38.82 TL129, TL131 W1 = 2.540, W2 = 2.540, W3 = 0.025 W1 = 100, W2 = 100, W3 = 1 TL134 W1 = 17.780, W2 = 12.700 W1 = 700, W2 = 500 TL135 W1 = 2.540, W2 = 15.240 W1 = 100, W2 = 600 W = 0.762, L = 0.508 W = 30, L = 20 TL136 0.003 , 78.27 table continued on page 6 Data Sheet - DISCONTINUED 5 of 10 Rev. 06, 2013-05-16 PTFA091203EL Reference Circuit (cont.) Electrical Characteristics at 960 MHz Transmission Electrical Line Characteristics Dimensions: mm Dimensions: mils Output TL201, TL221 0.058 , 51.58 W = 1.651, L = 10.922 W = 65, L = 430 TL202 0.014 , 51.58 W = 1.651, L = 2.720 W = 65, L = 107 TL203, TL204 0.000 , 146.88 W = 0.025, L = 0.025 W = 1, L = 1 TL205 0.014 , 38.82 W = 2.540, L = 2.540 W = 100, L = 100 TL206 0.013 , 51.58 W = 1.651, L = 2.540 W = 65, L = 100 TL207 0.128 , 10.17 W = 13.208, L = 22.352 W = 520, L = 880 TL208, TL226 0.014 , 23.03 W = 5.080, L = 2.540 W = 200, L = 100 t c u d o pr TL209 W1 = 5.080, W2 = 0.025, W3 = 5.080 W4 = 0.025 W1 = 200, W2 = 1, W3 = 200, W4 = 1 TL210, TL211, TL212, TL213 W = 1.651 W = 65 TL214, TL225 0.090 , 28.85 W = 3.810, L = 16.398 TL215, TL223 0.021 , 28.85 W1 = 3.810, W2 = 3.810, W3 = 3.810 W1 = 150, W2 = 150, W3 = 150 TL216, TL222 0.004 , 28.85 W1 = 3.810, W2 = 3.810, W3 = 0.762 W1 = 150, W2 = 150, W3 = 30 TL217, TL224 0.021 , 23.03 W1 = 5.080, W2 = 5.080, W3 = 3.810 W1 = 200, W2 = 200, W3 = 150 TL218 (taper) 0.015 , 23.03 / 38.82 W1 = 5.080, W2 = 2.540, L = 2.794 W1 = 200, W2 = 100, L = 110 TL219 (taper) 0.064 , 10.17 / 23.03 W1 = 13.208, W2 = 5.080, L = 11.176 W1 = 520, W2 = 200, L = 440 TL220 0.004 , 51.58 W = 1.651, L = 0.762 W = 65, L = 30 W1 = 3.810, W2 = 2.540, W3 = 3.810 W4 = 2.540 W1 = 150, W2 = 100, W3 = 150, W4 = 100 TL227, TL228 u n ti n o c s i ed W = 150, L = 646 See further reference circuit information on next page d Data Sheet - DISCONTINUED 6 of 10 Rev. 06, 2013-05-16 PTFA091203EL Reference Circuit (cont.) Circuit Assembly Information Test Fixture Part No. LTN/PTFA091203EF Find Gerber files for this test fixture on the Infineon Web site at http://www.infineon.com/rfpower VDD C805 C804 R801 C803 R805 S3 d o r p C801 S1 R803 C211 R101 R103 d e u n ti C106 d PTFA091203_IN_01 C213 C209 10 F n o c s i RF_OUT C212 C215 + C107 10 F C108 C202 C214 + C101 C102 RF_IN t c u + 10 F R802 VDD S2 R102 C103 10 F + C802 + R804 C104 C105 C201 C204 C203 C205 C206 VDD C207 C210 C208 PTFA091203_OUT_01 RO4350, .030 (62) RO4350, .030 (62) a 0 9 1 2 0 3 e l _ C D _ 1 1 - 1 2 - 2 0 1 0 Reference circuit assembly diagram (not to scale) Data Sheet - DISCONTINUED 7 of 10 Rev. 06, 2013-05-16 PTFA091203EL Reference Circuit (cont.) Component Description Suggested Manufacturer P/N Input C101 Chip capacitor, 4.7 pF ATC ATC100B4R7BW500XB C102 Chip capacitor, 10000 pF ATC ATC200B103MW C103, C108 Chip capacitor, 33 pF ATC ATC100B330FW500XB C104 Chip capacitor, 0.01 F ATC ATC200B103MW C105 Chip capacitor, 4.71 F Digi-Key 493-2372-2-ND C106 Chip capacitor, 5.1 pF ATC ATC100B5R1BW500XB C107 Chip capacitor, 6.2 pF ATC ATC100B6R2BW500XB C801, C802 Chip capacitor, 0.1 F Digi-Key C803, C804, C805 Capacitor, 0.01 F Digi-Key R101, R103, R802, R804 Resistor, 10 Digi-Key R102 Resistor, 5100 Digi-Key R801 Resistor, 1300 Digi-Key R803 Resistor, 1000 Digi-Key R805 Resistor, 1200 Digi-Key d e u n ti S1 Potentiometer, 2k Digi-Key S2 Transistor Digi-Key S3 Voltage Regulator Output C201, C208 C202, C203, C206, C207 C211, C215 C213, C214 Capacitor, 10 F c s i C204, C205, C209, C210 C212 n o Chip capacitor, 1 F d Capacitor, 10 F t c u PCC104BCT-ND PCC1772CT-ND d o pr P10ECT-ND P5.1KECT-ND P1.3KGCT-ND P1.0KECT-ND P1.2KGCT-ND 3224W-202ECT-ND BCP5616TA-ND Digi-Key LM78L05ACM-ND Digi-Key 478-3993-2-ND Digi-Key 281M5002106K Digi-Key 587-1818-2-ND Chip capacitor, 20000 pF ATC ATC200B203MW Chip capacitor, 33 pF ATC ATC100B330FW500XB Chip capacitor, 1.5 pF ATC ATC100B1R5BW500XB Data Sheet - DISCONTINUED 8 of 10 Rev. 06, 2013-05-16 PTFA091203EL Package Outline Specifications Package H-33288-6 t c u d e u n ti d o r p n o c s i d Diagram Notes--unless otherwise specified: 1. Interpret dimensions and tolerances per ASME Y14.5M-1994. 2. Primary dimensions are mm. Alternate dimensions are inches. 3. All tolerances 0.127 [.005] unless specified otherwise. 4. Pins: G = gate, S = source, D = drain, V = VDD, E, F = N.C. 5. Lead thickness: 0.10 + 0.051/-0.025 mm [.004 +0.002/-0.001 inch]. 6. Gold plating thickness: 0.25 micron [10 microinch] max. Find the latest and most complete information about products and packaging at the Infineon Internet page http://www.infineon.com/rfpower Data Sheet - DISCONTINUED 9 of 10 Rev. 06, 2013-05-16 PTFA091203EL V4 Revision History: 2013-05-16 Previous Version: 2010-11-12 Data Sheet Page Subjects (major changes since last revision) All Product Discontinued. Please see PD Notes : PD_044_13 Discontinued Data Sheet We Listen to Your Comments Any information within this document that you feel is wrong, unclear or missing at all? Your feedback will help us to continuously improve the quality of this document. Please send your proposal (including a reference to this document) to: highpowerRF@infineon.com To request other information, contact us at: +1 877 465 3667 (1-877-GO-LDMOS) USA or +1 408 776 0600 International d e d o r p u tin n o c s i Edition 2013-05-16 Published by Infineon Technologies AG 85579 Neubiberg, Germany t c u d (c) 2009 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com/rfpower). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Data Sheet - DISCONTINUED 10 of 10 Rev. 06, 2013-05-16