World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
Transient Voltage Suppression Diodes
The Protection Products Group of World Products Inc. is committed to providing the optimum products for your
transient/surge protection problems. Our TVS Diode satisfies the toughest requirements for a low clamping device and
provides superior performance in all applications.
World Products expands your options . . . . Large selection of equivalents to essentially all TVS Diodes. World
Products specifications are designed to provide all of the necessary physical and electrical parameters required for
proper component selection.
Discover why the first choice in TVS Diodes is WPI.
Table of Contents
General
Information
Selecting the Correct Part Type,
Definition of Terms, General
Characteristics.
Axial Type
P4KE Series 400 Watt
SA Series 500 Watt
P6KE Series 600 Watt
1.5KE Series 1500 Watt
3KP Series 3000 Watt
5KP Series 5000 Watt
15KP Series 15000 Watt
Surface Mount
P6SMBJ Series 600 Watt
1.5SMCJ Series 1500 Watt
P4SMAJ Series 400 Watt
3.0SMCJ Series 3000 Watt
Circuit Examples Data Line Protection, AC Line Protection, Telecom Circuit Protection
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
Transient Voltage Suppression Diodes
General Information
TVS Diode Technology
World Products Transient Voltage Suppression (TVS) Diodes are silicon avalanche devices designed, manufactured,
specified and tested according to voltage suppression applications.
These devices, with their fast response and low clamping characteristics, protect all MOS technology based devices,
hybrids, and other voltage sensitive components. The low clamping factor and pico-second response time of World
Products TVS Diodes clamps transient pulses early and maintains them at an acceptable level for their entire duration. In
other overvoltage protection devices, response times are delayed by 24nS to 2µs allowing transients to reach dangerous
levels. World Products TVS Diodes are designed to meet a 1.30 maximum clamping factor at their rated peak impulse
current. This can be compared to clamping factors of 2 to 5 found in other protection devices.
TVS Diode Applications
TVS Diodes are the optimum choice in protecting computer or data processor circuits and power supplies, airframe
avionics and controls, numerically controlled machines, telecom circuits, and many other applications. These devices are
designed to protect against transient voltages generated by lightning, electro-static discharge (ESD), and inductive
switching.
Selecting the Correct Part Type
The following guidelines should be observed in selecting the correct diode:
TVS Parameters Application Parameters
1. Stand-off Voltage (Vwm) >= Operating Voltage (Vop)
2. Peak Pulse Current (Ippm) >= Source Transient Current (Is)
3. Clamping Voltage (Vc) =< Voltage Withstand (Vws)
1. If the stand-off voltage is less than the operating voltage of the application, the diode will continually clamp the
circuit voltage.
2. The Peak Pulse Current (Ippm) is the maximum current the TVS can handle. The source transient current is
determined by dividing the peak transient voltage by the source impedance - this is often difficult to determine. In
many cases, however, this may be obtained from industry standard documents, customer requirements, etc.
3. Determine the maximum voltage level that the protected device can withstand (Vws). Select a suppressor which will
clamp the transient at a lower level (Vc).
Consider the transient source: lightning, electro-static discharge, inductive switching or nuclear explosion (NEMP). Often,
a 1500 watt peak pulse rated device will protect against transients due to secondary lightning effects or inductive switching
on power, data and telephone lines. A 500 watt device is sufficient to protect sensitive components against transients
generated by electro-static discharge.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
Transient Voltage Suppression Diodes
General Information - (Continued)
Schematic Symbols
Definitions of Terms
Vc Clamping Voltage:
Peak voltage across the suppressor measured at a specific Ippm. (Note: due to thermal, reactive or other effects, peak
voltage and peak current are not necessarily coincident in time.)
Ipp Peak Impulse Current:
Peak current measured using a specified waveform.
Ippm Rated Peak Impulse Current:
Rated maximum value of peak impulse current (Ipp) applied using a 10 x 1000µs waveform. (Minimum of 10 pulses
applied.)
Vwm Rated Standoff Voltage:
Maximum working (continuous) DC or peak voltage which may be applied over the standard operating temperature
range. (Note: Vwm of a selected device must be greater than or equal to the maximum operating voltage of the line to
be protected.)
Id Stand-By Current:
Maximum current that flows through the suppressor at rated standoff voltage (Vwm) at a specified temperature.
Vbr Breakdown Voltage:
The voltage measured across the suppressor at a specified DC test current (It).
It Test Current:
The specific DC current applied to the suppressor used to determine breakdown voltage (Vbr).
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
Transient Voltage Suppression Diodes
General Information - (Continued)
Vbr Temperature Coefficient:
The ratio of change in breakdown voltage (Vbr) to changes in temperature. Expressed either as millivolts per degree
centigrade (mV/°C) or percent change in breakdown voltage per degree centigrade (%Vbr/°C).
Cf Clamping Factor:
Ratio of the measured clamping voltage (Vc) at specified peak pulse current (Ipp) to breakdown voltage (Vbr) on a
specific device.
Vc
Cf = -----
Vbr
C Capacitance:
Capacitance between the two terminals of a suppressor measured at a specific frequency and bias voltage.
Pppm Rated Multiple Peak Pulse Power:
Derived by multiplying the maximum clamping voltage (Vc) times the Rated Peak Impulse Current (Ippm).
Ifsm Rated Forward Surge Current:
Unidirectional devices only. Maximum forward current during a 8.3ms half sine wave of AC line frequency (60Hz).
Impulse Current Waveform
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
Transient Voltage Suppression Diodes
General Information - (Continued)
Mechanical Characteristics
Case: UL94V-0 Molded Epoxy
Leads: Tinned Copper
Solderability: Military Standard 202E Method 208C
Marking: World Products Logo, Part Number and EIA Date Code
Method Avaliable: Tape and Reel to EIA-296-D
Part Numbering System
Example - SA170A
SA 170 A
Series Voltage Polarity Tolerance
Axial Type Blank=Unipolar
C=Bipolar
Blank=10%
A=5%
P4KE = 400 Watt Nominal Breakdown Voltage
SA = 500 Watt Rated Standoff Voltage
P6KE = 600 Watt Nominal Breakdown Voltage
1.5KE = 1500 Watt Nominal Breakdown Voltage
3KP = 3000 Watt Rated Standoff Voltage
5KP = 5000 Watt Rated Standoff Voltage
15KP = 15000 Watt Rated Standoff Voltage
Surface Mount
P4SMAJ = 400 Watt Surface Mount Rated Standoff Voltage
P6SMBJ = 600 Watt Surface Mount Rated Standoff Voltage
1.5SMCJ = 1500 Watt Surface Mount Rated Standoff Voltage
3.0SMCJ = 3000 Watt Surface Mount Rated Standoff Voltage
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 400 Watt Specifications - Electrical Characteristics
Part Number*
Rated
Standoff
Voltage
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current Ippm#
Vbr (Volts) @It
Vwm (Volts) Min Max (mA) (µA) (Volts) (Amperes)
P4KE6.8 5.50 6.12 7.48 10 1000 10.8 38.0
P4KE6.8A 5.80 6.45 7.14 10 1000 10.5 40.0
P4KE7.5 6.05 6.75 8.25 10 500 11.7 36.0
P4KE7.5A 6.40 7.13 7.88 10 500 11.3 37.0
P4KE8.2 6.63 7.38 9.02 10 200 12.5 33.0
P4KE8.2A 7.02 7.79 8.61 10 200 12.1 35.0
P4KE9.1 7.37 8.19 10.00 150 13.8 30.0
P4KE9.1A 7.78 8.65 9.55 150 13.4 31.0
P4KE10 8.10 9.00 11.00 110 15.0 28.0
P4KE10A 8.55 9.50 10.50 110 14.5 29.0
P4KE11 8.92 9.90 12.10 1 5 16.2 26.0
P4KE11A 9.40 10.50 11.60 1 5 15.6 27.0
P4KE12 9.72 10.80 13.20 1 5 17.3 24.0
P4KE12A 10.20 11.40 12.60 1 5 16.7 25.0
P4KE13 10.50 11.70 14.30 1 5 19.0 22.0
P4KE13A 11.10 12.40 13.70 1 5 18.2 23.0
P4KE15 12.10 13.50 16.50 1 5 22.0 19.0
P4KE15A 12.80 14.30 15.80 1 5 21.2 20.0
P4KE16 12.90 14.40 17.60 1 5 23.5 18.0
P4KE16A 13.60 15.20 16.80 1 5 22.5 19.0
P4KE18 14.50 16.20 19.80 1 5 26.5 16.0
P4KE18A 15.30 17.10 18.90 1 5 25.2 17.0
P4KE20 16.20 18.00 22.00 1 5 29.1 14.0
P4KE20A 17.10 19.00 21.00 1 5 27.7 15.0
P4KE22 17.80 19.80 24.20 1 5 31.9 13.0
P4KE22A 18.80 20.90 23.10 1 5 30.6 14.0
P4KE24 19.40 21.60 26.40 1 5 34.7 12.0
P4KE24A 20.50 22.80 25.20 1 5 33.2 13.0
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 400 Watt Specifications - Electrical Characteristics - (Continued)
Part Number*
Rated
Standoff
Voltage
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current Ippm#
Vbr (Volts) @It
Vwm (Volts) Min Max (mA) (µA) (Volts) (Amperes)
P4KE27 21.80 24.30 29.70 1 5 39.1 11.0
P4KE27A 23.10 25.70 28.40 1 5 37.5 11.2
P4KE30 24.30 27.00 33.00 1 5 43.5 10.0
P4KE30A 25.60 28.50 31.50 1 5 41.4 10.0
P4KE33 26.80 29.70 36.30 1 5 47.7 9.0
P4KE33A 28.20 31.40 34.70 1 5 45.7 9.0
P4KE36 29.10 32.40 39.60 1 5 52.0 8.0
P4KE36A 30.80 34.20 37.80 1 5 49.9 8.4
P4KE39 31.60 35.10 42.90 1 5 56.4 7.4
P4KE39A 33.30 37.10 41.00 1 5 53.9 7.8
P4KE43 34.80 38.70 47.30 1 5 61.9 6.8
P4KE43A 36.80 40.90 45.20 1 5 59.3 7.1
P4KE47 38.10 42.30 51.70 1 5 67.8 6.2
P4KE47A 40.20 44.70 49.40 1 5 64.8 5.0
P4KE51 41.30 45.90 56.10 1 5 73.5 5.7
P4KE51A 43.60 48.50 53.60 1 5 70.1 6.0
P4KE56 45.60 50.40 61.60 1 5 80.5 5.2
P4KE56A 47.80 53.20 58.80 1 5 77.0 5.5
P4KE62 50.20 55.80 68.20 1 5 89.0 4.7
P4KE62A 53.00 58.90 65.10 1 5 85.0 5.0
P4KE68 55.10 61.20 74.80 1 5 98.0 4.3
P4KE68A 58.10 64.60 71.40 1 5 92.0 4.6
P4KE75 60.70 67.50 82.50 1 5 108.0 3.9
P4KE75A 64.10 71.30 78.80 1 5 103.0 4.1
P4KE82 66.40 73.80 90.20 1 5 118.0 3.6
P4KE82A 70.10 77.90 86.10 1 5 113.0 3.7
P4KE91 73.70 81.90 100.00 1 5 131.0 3.2
P4KE91A 77.80 86.50 95.50 1 5 125.0 3.4
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 400 Watt Specifications - Electrical Characteristics - (Continued)
Part Number*
Rated
Standoff
Voltage
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current Ippm#
Vbr (Volts) @It
Vwm (Volts) Min Max (mA) (µA) (Volts) (Amperes)
P4KE100 81.00 90.00 110.00 1 5 144.0 2.9
P4KE100A 85.50 95.00 105.00 1 5 137.0 3.1
P4KE110 89.20 99.90 121.00 1 5 158.0 2.7
P4KE110A 94.00 105.00 116.00 1 5 152.0 2.8
P4KE120 97.20 108.00 132.00 1 5 173.0 2.4
P4KE120A 102.00 114.00 126.00 1 5 165.0 2.5
P4KE130 105.00 117.00 143.00 1 5 187.0 2.2
P4KE130A 111.00 124.00 137.00 1 5 179.0 2.3
P4KE150 121.00 135.00 165.00 1 5 215.0 2.0
P4KE150A 128.00 143.00 158.00 1 5 207.0 2.0
P4KE160 130.00 144.00 176.00 1 5 230.0 1.8
P4KE160A 136.00 152.00 168.00 1 5 219.0 1.9
P4KE170 138.00 153.00 187.00 1 5 244.0 1.7
P4KE170A 145.00 162.00 179.00 1 5 234.0 1.8
P4KE180 146.00 162.00 198.00 1 5 258.0 1.6
P4KE180A 154.00 171.00 189.00 1 5 246.0 1.7
P4KE200 162.00 180.00 220.00 1 5 287.0 1.5
P4KE200A 171.00 190.00 210.00 1 5 274.0 1.53
P4KE220 175.00 198.00 242.00 1 5 344.0 1.16
P4KE220A 185.00 209.00 231.00 1 5 328.0 1.22
P4KE250 202.00 225.00 275.00 1 5 360.0 1.10
P4KE250A 214.00 237.00 263.00 1 5 344.0 1.16
P4KE300 243.00 270.00 330.00 1 5 430.0 0.93
P4KE300A 256.00 285.00 315.00 1 5 414.0 0.97
P4KE350 284.00 315.00 385.00 1 5 504.0 0.79
P4KE350A 300.00 332.00 368.00 1 5 482.0 0.83
P4KE400 324.00 360.00 440.00 1 5 574.0 0.70
P4KE400A 342.00 380.00 420.00 1 5 548.0 0.73
P4KE440 356.00 396.00 484.00 1 5 631.0 0.66
P4KE440A 376.00 418.00 462.00 1 5 600.0 0.69
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 400 Watt Specifications - P4KE Series Features
P4KE Series Features
400 watt peak pulse power dissipation
Avaliable in voltages form 6.8V to 440V
Unidirectional and Bidirectional
Glass passivated junction
Low clamping factor
Avaliable in bulk or tape and reel (Reel quantity = 4,000 pieces)
Each device 100% surge tested
Absolute Maximum Ratings
Peak pulse power dissipation (Pppm) at 25°C................................................................................ 400W
Steady state power dissipation at lead temperature = 75°C (Lead length 3/8" min.).......................... 1W
Operating and storage temperatures............................................................................ -65°C to + 175°C
UL497B, File # E135015
Mechanical Dimensions
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 500 Watt Specifications - Electrical Characteristics
Part Number*
Rated
Standoff
Voltage
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current Ippm#
Vbr (Volts) @It
Vwm (Volts) Min Max (mA) (µA) (Volts) (Amperes)
SA5.0 5.0 6.40 7.30 10 600 9.6 52.0
SA5.0A 5.0 6.40 7.00 10 600 9.2 54.3
SA6.0 6.0 6.67 8.15 10 600 11.4 43.9
SA6.0A 6.0 6.67 7.37 10 600 10.3 48.5
SA6.5 6.5 7.22 8.82 10 400 12.3 40.7
SA6.5A 6.5 7.22 7.98 10 400 11.2 44.7
SA7.0 7.0 7.78 9.51 10 150 13.3 37.8
SA7.0A 7.0 7.78 8.60 10 150 12.0 41.7
SA7.5 7.5 8.33 10.2 150 14.3 35.0
SA7.5A 7.5 8.33 9.21 150 12.9 38.8
SA8.0 8.0 8.89 10.9 125 15.0 33.3
SA8.0A 8.0 8.89 8.93 125 13.6 36.7
SA8.5 8.5 9.44 11.5 110 15.9 31.4
SA8.5A 8.5 9.44 10.4 110 14.4 34.7
SA9.0 9.0 10.0 12.2 1 5 16.9 29.5
SA9.0A 9.0 10.0 11.1 1 5 15.4 32.5
SA10 10 11.1 13.6 1 3 18.8 26.6
SA10A 10 11.1 12.3 1 3 17.0 29.4
SA11 11 12.2 14.9 1 3 20.1 24.9
SA11A 11 12.2 13.5 1 3 18.2 27.4
SA12 12 13.3 16.3 1 3 22.0 22.7
SA12A 12 13.3 14.7 1 3 19.9 25.1
SA13 13 14.4 17.6 1 3 23.8 21.0
SA13A 13 14.4 15.9 1 3 21.5 23.2
SA14 14 15.6 19.1 1 3 25.8 19.4
SA14A 14 15.6 17.2 1 3 23.2 21.5
* = Add "C" or "CA" suffix for bidirectional device types. (SA5.0A is not avaliable in Bi-Directional)
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 500 Watt Specifications - Electrical Characteristics - (Continued)
Part Number*
Rated
Standoff
Voltage
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current Ippm#
Vbr (Volts) @It
Vwm (Volts) Min Max (mA) (µA) (Volts) (Amperes)
SA15 15 16.7 20.4 1 3 26.9 18.8
SA15A 15 16.7 18.5 1 3 24.4 20.6
SA16 16 17.8 21.8 1 3 28.8 17.6
SA16A 16 17.8 19.7 1 3 26.0 19.2
SA17 17 18.9 23.1 1 3 30.5 16.4
SA17A 17 18.9 20.9 1 3 27.6 18.1
SA18 18 20.0 24.4 1 3 32.2 15.5
SA18A 18 20.0 22.1 1 3 29.2 17.2
SA20 20 22.2 27.1 1 3 35.8 13.9
SA20A 20 22.2 24.5 1 3 32.4 15.4
SA22 22 24.4 29.8 1 3 39.4 12.7
SA22A 22 24.4 26.9 1 3 35.5 14.1
SA24 24 26.7 32.6 1 3 43.0 11.6
SA24A 24 26.7 29.5 1 3 38.9 12.8
SA26 26 28.9 35.3 1 3 46.6 10.7
SA26A 26 28.9 31.9 1 3 42.1 11.9
SA28 28 31.1 38.0 1 3 50.0 9.9
SA28A 28 31.1 34.4 1 3 45.4 11.0
SA30 30 33.3 40.7 1 3 53.5 9.3
SA30A 30 33.3 36.8 1 3 48.4 10.3
SA33 33 36.7 44.9 1 3 59.0 8.5
SA33A 33 36.7 40.6 1 3 53.3 9.4
SA36 36 40.0 48.9 1 3 64.3 7.8
SA36A 36 40.0 44.2 1 3 58.1 8.6
SA40 40 44.4 54.3 1 3 71.4 7.0
SA40A 40 44.4 49.1 1 3 64.5 7.8
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 500 Watt Specifications - Electrical Characteristics - (Continued)
Part Number*
Rated
Standoff
Voltage
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current Ippm#
Vbr (Volts) @It
Vwm (Volts) Min Max (mA) (µA) (Volts) (Amperes)
SA43 43 47.8 58.4 1 3 76.7 6.5
SA43A 43 47.8 52.8 1 3 69.4 7.2
SA45 45 50.0 61.1 1 3 80.3 6.2
SA45A 45 50.0 55.3 1 3 72.7 6.9
SA48 48 53.3 65.1 1 3 85.5 5.8
SA48A 48 53.3 58.9 1 3 77.4 6.5
SA51 51 56.7 69.3 1 3 91.1 5.5
SA51A 51 56.7 62.7 1 3 82.4 6.1
SA54 54 60.0 73.3 1 3 96.3 5.2
SA54A 54 60.0 66.3 1 3 87.1 5.7
SA58 58 64.4 78.7 1 3 103.0 4.9
SA58A 58 64.4 71.2 1 3 93.6 5.3
SA60 60 66.7 81.5 1 3 107.0 4.7
SA60A 60 66.7 73.7 1 3 96.8 5.2
SA64 64 71.1 86.9 1 3 114.0 4.4
SA64A 64 71.1 78.6 1 3 103.0 4.9
SA70 70 77.8 95.1 1 3 125.0 4.0
SA70A 70 77.8 86.0 1 3 113.0 4.4
SA75 75 83.3 102.0 1 3 134.0 3.7
SA75A 75 83.3 92.1 1 3 121.0 4.1
SA78 78 86.7 106.0 1 3 139.0 3.6
SA78A 78 86.7 95.8 1 3 126.0 4.0
SA85 85 94.4 115.0 1 3 151.0 3.3
SA85A 85 94.4 104.0 1 3 137.0 3.6
SA90 90 100 122.0 1 3 160.0 3.1
SA90A 90 100 111.0 1 3 146.0 3.4
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 500 Watt Specifications - Electrical Characteristics - (Continued)
Part Number*
Rated
Standoff
Voltage
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current Ippm#
Vbr (Volts) @It
Vwm (Volts) Min Max (mA) (µA) (Volts) (Amperes)
SA100 100 111 136.0 1 3 179.9 2.8
SA100A 100 111 123.0 1 3 162.0 3.1
SA110 110 122 149.0 1 3 196.0 2.6
SA110A 110 122 135.0 1 3 177.0 2.8
SA120 120 133 163.0 1 3 214.0 2.3
SA120A 120 133 147.0 1 3 193.0 2.0
SA130 130 144 176.0 1 3 231.0 2.2
SA130A 130 144 159.0 1 3 209.0 2.4
SA150 150 167 204.0 1 3 268.0 1.9
SA150A 150 167 185.0 1 3 243.0 2.1
SA160 160 178 218.0 1 3 287.0 1.7
SA160A 160 178 197.0 1 3 259.0 1.9
SA170 170 189 231.0 1 3 304.0 1.6
SA170A 170 189 209.0 1 3 275.0 1.8
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 500 Watt Specifications - SA Series Features
SA Series Features
·500 watt peak pulse power dissipation
·Avaliable in voltages form 5.0V to 170V
·Unidirectional and Bidirectional
·Glass passivated junction
·Low clamping factor
·Avaliable in bulk or tape and reel (Reel quantity = 5,000 pieces)
·Each device 100% surge tested
Absolute Maximum Ratings
·Peak pulse power dissipation (Pppm) at 25°C................................................................................ 500W
·Steady state power dissipation at lead temperature = 75°C (Lead length 3/8" min.)......................... 1W
·Operating and storage temperatures............................................................................ -55°C to + 175°C
Mechanical Dimensions
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 600 Watt Specifications - Electrical Characteristics
Part Number*
Rated
Standoff
Voltage
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current Ippm#
Vbr (Volts) @It
Vwm (Volts) Min Max (mA) (µA) (Volts) (Amperes)
P6KE6.8 5.50 6.12 7.48 10 1000 10.8 56
P6KE6.8A 5.80 6.45 7.14 10 1000 10.5 57
P6KE7.5 6.05 6.75 8.25 10 500 11.7 51
P6KE7.5A 6.40 7.13 7.88 10 500 11.3 53
P6KE8.2 6.63 7.38 9.02 10 200 12.5 48
P6KE8.2A 7.02 7.79 8.61 10 200 12.1 50
P6KE9.1 7.37 8.19 10.0 150 13.8 44
P6KE9.1A 7.78 8.65 9.55 150 13.4 45
P6KE10 8.10 9.00 11.0 110 15.0 40
P6KE10A 8.55 9.5 10.5 110 14.5 41
P6KE11 8.92 9.9 12.1 1 5 16.2 37
P6KE11A 9.40 10.5 11.6 1 5 15.6 38
P6KE12 9.72 10.8 13.2 1 5 17.3 35
P6KE12A 10.2 11.4 12.6 1 5 16.7 36
P6KE13 10.5 11.7 14.3 1 5 19.0 32
P6KE13A 11.1 12.4 13.7 1 5 18.2 33
P6KE15 12.1 13.5 16.5 1 5 22.0 27
P6KE15A 12.8 14.3 15.8 1 5 21.2 28
P6KE16 12.9 14.4 17.6 1 5 23.5 26
P6KE16A 13.6 15.2 16.8 1 5 22.5 27
P6KE18 14.5 16.2 19.8 1 5 26.5 23
P6KE18A 15.3 17.1 18.9 1 5 25.2 24
P6KE20 16.2 18.0 22.0 1 5 29.1 21
P6KE20A 17.1 19.0 21.0 1 5 27.7 22
P6KE22 17.8 19.8 24.2 1 5 31.9 19
P6KE22A 18.8 20.9 23.1 1 5 30.6 20
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 600 Watt Specifications - Electrical Characteristics - (Continued)
Part Number*
Rated
Standoff
Voltage
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current Ippm#
Vbr (Volts) @It
Vwm (Volts) Min Max (mA) (µA) (Volts) (Amperes)
P6KE24 19.4 21.6 26.4 1 5 34.7 17
P6KE24A 20.5 22.8 25.2 1 5 33.2 18
P6KE27 21.8 24.3 29.7 1 5 39.1 15
P6KE27A 23.1 25.7 28.4 1 5 37.5 16
P6KE30 24.3 27.0 33.0 1 5 43.5 14
P6KE30A 25.6 28.5 31.5 1 5 41.4 14.4
P6KE33 26.8 29.7 36.3 1 5 47.7 12.6
P6KE33A 28.2 31.4 34.7 1 5 45.7 13.2
P6KE36 29.1 32.4 39.6 1 5 52.0 11.6
P6KE36A 30.8 34.2 37.8 1 5 49.9 12.0
P6KE39 31.6 35.1 42.9 1 5 56.4 10.5
P6KE39A 33.3 37.1 41.0 1 5 53.9 11.2
P6KE43 34.8 38.7 47.3 1 5 61.9 9.6
P6KE43A 36.8 40.9 45.2 1 5 59.3 10.1
P6KE47 38.1 42.3 51.7 1 5 67.8 8.9
P6KE47A 40.2 44.7 49.4 1 5 64.8 9.3
P6KE51 41.3 45.9 56.1 1 5 73.5 8.2
P6KE51A 43.6 48.5 53.6 1 5 70.1 8.6
P6KE56 45.4 50.4 61.6 1 5 80.5 7.4
P6KE56A 47.8 53.2 58.8 1 5 77.0 7.8
P6KE62 50.2 55.8 68.2 1 5 89.0 6.8
P6KE62A 53.0 58.9 65.1 1 5 85.0 7.1
P6KE68 55.1 61.2 74.8 1 5 98.0 6.1
P6KE68A 58.1 64.6 71.4 1 5 92.0 6.5
P6KE75 60.7 67.5 82.5 1 5 108.0 5.5
P6KE75A 64.1 71.3 78.8 1 5 103.0 5.8
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 600 Watt Specifications - Electrical Characteristics - (Continued)
Part Number*
Rated
Standoff
Voltage
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current Ippm#
Vbr (Volts) @It
Vwm (Volts) Min Max (mA) (µA) (Volts) (Amperes)
P6KE82 66.4 73.8 90.2 1 5 118.0 5.1
P6KE82A 70.1 77.9 86.1 1 5 113.0 5.3
P6KE91 73.7 81.9 100.0 1 5 131.0 4.5
P6KE91A 77.8 86.5 95.5 1 5 125.0 4.8
P6KE100 81.0 90.0 110.0 1 5 144.0 4.2
P6KE100A 85.5 95.0 105.0 1 5 137.0 4.4
P6KE110 89.2 99.0 121.0 1 5 158.0 3.8
P6KE110A 94.0 105.0 116.0 1 5 152.0 4.0
P6KE120 97.2 108.0 132.0 1 5 173.0 3.5
P6KE120A 102.0 114.0 126.0 1 5 165.0 3.6
P6KE130 105.0 117.0 143.0 1 5 187.0 3.2
P6KE130A 111.0 124.0 137.0 1 5 179.0 3.3
P6KE150 121.0 135.0 165.0 1 5 215.0 2.8
P6KE150A 128.0 143.0 158.0 1 5 207.0 2.9
P6KE160 130.0 144.0 176.0 1 5 230.0 2.6
P6KE160A 136.0 152.0 168.0 1 5 219.0 2.7
P6KE170 138.0 153.0 187.0 1 5 244.0 2.5
P6KE170A 145.0 162.0 179.0 1 5 234.0 2.6
P6KE180 146.0 162.0 198.0 1 5 258.0 2.3
P6KE180A 154.0 171.0 189.0 1 5 246.0 2.4
P6KE200 162.0 180.0 220.0 1 5 287.0 2.1
P6KE200A 171.0 190.0 210.0 1 5 274.0 2.2
P6KE220 175.0 198.0 242.0 1 5 344.0 1.75
P6KE220A 185.0 209.0 231.0 1 5 328.0 1.83
P6KE250 202.0 225.0 275.0 1 5 360.0 1.67
P6KE250A 214.0 237.0 263.0 1 5 344.0 1.75
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 600 Watt Specifications - Electrical Characteristics - (Continued)
Part Number*
Rated
Standoff
Voltage
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current Ippm#
Vbr (Volts) @It
Vwm (Volts) Min Max (mA) (µA) (Volts) (Amperes)
P6KE300 243.0 270.0 330.0 1 5 430.0 1.40
P6KE300A 256.0 285.0 315.0 1 5 414.0 1.45
P6KE350 284.0 315.0 385.0 1 5 504.0 1.20
P6KE350A 300.0 332.0 368.0 1 5 482.0 1.25
P6KE400 324.0 360.0 440.0 1 5 574.0 1.05
P6KE400A 342.0 380.0 420.0 1 5 548.0 1.10
P6KE440 356.0 396.0 484.0 1 5 631.0 0.99
P6KE440A 376.0 418.0 462.0 1 5 600.0 1.04
P6KE550 445.5 495.0 605.0 1 5 792.0 0.76
P6KE550A 467.5 522.5 577.5 1 5 753.5 0.80
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 600 Watt Specifications - P6KE Series Features
P6KE Series Features
·600 watt peak pulse power dissipation
·Avaliable in voltages from 6.8V to 400V
·Unidirectional and Bidirectional
·Glass passivated junction
·Low clamping factor
·Avaliable in bulk or tape and reel (Reel quantity = 5,000 pieces)
·Each device 100% surge tested
Absolute Maximum Ratings
·Peak pulse power dissipation (Pppm) at 25°C................................................................................ 600W
·Steady state power dissipation at lead temperature = 75°C (Lead length 3/8" min.).......................... 5W
·Operating and storage temperatures............................................................................ -55°C to + 175°C
Mechanical Dimensions
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 1500 Watt Specifications - 1.5KE Series Electrical Characteristics
Part Number*
Rated
Standoff
Voltage
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current Ippm#
Vbr (Volts) @It
Vwm (Volts) Min Max (mA) (µA) (Volts) (Amperes)
1.5KE6.8 5.50 6.12 7.48 10 1000 10.8 139.0
1.5KE6.8A 5.80 6.45 7.14 10 1000 10.5 143.0
1.5KE7.5 6.05 6.75 8.25 10 500 11.7 128.0
1.5KE7.5A 6.40 7.13 7.88 10 500 11.3 132.0
1.5KE8.2 6.63 7.38 9.02 10 200 12.5 120.0
1.5KE8.2A 7.02 7.79 8.61 10 200 12.1 124.0
1.5KE9.1 7.37 8.19 10.0 150 13.8 109.0
1.5KE9.1A 7.78 8.65 9.55 150 13.4 112.0
1.5KE10 8.10 9.00 11.0 110 15.0 100.0
1.5KE10A 8.55 9.5 10.5 110 14.5 103.0
1.5KE11 8.92 9.9 12.1 1 5 16.2 93.0
1.5KE11A 9.40 10.5 11.6 1 5 15.6 96.0
1.5KE12 9.72 10.8 13.2 1 5 17.3 87.0
1.5KE12A 10.2 11.4 12.6 1 5 16.7 90.0
1.5KE13 10.5 11.7 14.3 1 5 19.0 79.0
1.5KE13A 11.1 12.4 13.7 1 5 18.2 82.0
1.5KE15 12.1 13.5 16.5 1 5 22.0 68.0
1.5KE15A 12.8 14.3 15.8 1 5 21.2 71.0
1.5KE16 12.9 14.4 17.6 1 5 23.5 64.0
1.5KE16A 13.6 15.2 16.8 1 5 22.5 67.0
1.5KE18 14.5 16.2 19.8 1 5 26.5 56.5
1.5KE18A 15.3 17.1 18.9 1 5 25.2 59.5
1.5KE20 16.2 18.0 22.0 1 5 29.1 51.5
1.5KE20A 17.1 19.0 21.0 1 5 27.7 54.0
1.5KE22 17.8 19.8 24.2 1 5 31.9 47.0
1.5KE22A 18.8 20.9 23.1 1 5 30.6 49.0
Metal hermetically sealed (DO13) version of this diode is available upon request.
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 1500 Watt Specifications - 1.5KE Series Electrical Characteristics - (Continued)
Part Number*
Rated
Standoff
Voltage
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current Ippm#
Vbr (Volts) @It
Vwm (Volts) Min Max (mA) (µA) (Volts) (Amperes)
1.5KE24 19.4 21.6 26.4 1 5 34.7 43.0
1.5KE24A 20.5 22.8 25.2 1 5 33.2 45.0
1.5KE27 21.8 24.3 29.7 1 5 39.1 38.5
1.5KE27A 23.1 25.7 28.4 1 5 37.5 40.0
1.5KE30 24.3 27.0 33.0 1 5 43.5 34.5
1.5KE30A 25.6 28.5 31.5 1 5 41.4 36.0
1.5KE33 26.8 29.7 36.3 1 5 47.7 31.5
1.5KE33A 28.2 31.4 34.7 1 5 45.7 33.0
1.5KE36 29.1 32.4 39.6 1 5 52.0 29.0
1.5KE36A 30.8 34.2 37.8 1 5 49.9 30.0
1.5KE39 31.6 35.1 42.9 1 5 56.4 26.5
1.5KE39A 33.3 37.1 41.0 1 5 53.9 28.0
1.5KE43 34.8 38.7 47.3 1 5 61.9 24.0
1.5KE43A 36.8 40.9 45.2 1 5 59.3 25.3
1.5KE47 38.1 42.3 51.7 1 5 67.8 22.2
1.5KE47A 40.2 44.7 49.4 1 5 64.8 23.2
1.5KE51 41.3 45.9 56.1 1 5 73.5 20.4
1.5KE51A 43.6 48.5 53.6 1 5 70.1 21.4
1.5KE56 45.4 50.4 61.6 1 5 80.5 18.6
1.5KE56A 47.8 53.2 58.8 1 5 77.0 19.5
1.5KE62 50.2 55.8 68.2 1 5 89.0 16.9
1.5KE62A 53.0 58.9 65.1 1 5 85.0 17.7
1.5KE68 55.1 61.2 74.8 1 5 98.0 15.3
1.5KE68A 58.1 64.6 71.4 1 5 92.0 16.3
1.5KE75 60.7 67.5 82.5 1 5 108.0 13.9
1.5KE75A 64.1 71.3 78.8 1 5 103.0 14.6
Metal hermetically sealed (DO13) version of this diode is available upon request.
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 1500 Watt Specifications - 1.5KE Series Electrical Characteristics - (Continued)
Part Number*
Rated
Standoff
Voltage
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current Ippm#
Vbr (Volts) @It
Vwm (Volts) Min Max (mA) (µA) (Volts) (Amperes)
1.5KE82 66.4 73.8 90.2 1 5 118.0 12.7
1.5KE82A 70.1 77.9 86.1 1 5 113.0 13.3
1.5KE91 73.7 81.9 100.0 1 5 131.0 11.4
1.5KE91A 77.8 86.5 95.5 1 5 125.0 12.0
1.5KE100 81.0 90.0 110.0 1 5 144.0 10.4
1.5KE100A 85.5 95.0 105.0 1 5 137.0 11.0
1.5KE110 89.2 99.0 121.0 1 5 158.0 9.5
1.5KE110A 94.0 105.0 116.0 1 5 152.0 9.9
1.5KE120 97.2 108.0 132.0 1 5 173.0 8.7
1.5KE120A 102.0 114.0 126.0 1 5 165.0 9.1
1.5KE130 105.0 117.0 143.0 1 5 187.0 8.0
1.5KE130A 111.0 124.0 137.0 1 5 179.0 8.4
1.5KE150 121.0 135.0 165.0 1 5 215.0 7.0
1.5KE150A 128.0 143.0 158.0 1 5 207.0 7.2
1.5KE160 130.0 144.0 176.0 1 5 230.0 6.5
1.5KE160A 136.0 152.0 168.0 1 5 219.0 6.8
1.5KE170 138.0 153.0 187.0 1 5 244.0 6.2
1.5KE170A 145.0 162.0 179.0 1 5 234.0 6.4
1.5KE180 146.0 162.0 198.0 1 5 258.0 5.8
1.5KE180A 154.0 171.0 189.0 1 5 246.0 6.1
1.5KE200 162.0 180.0 220.0 1 5 287.0 5.2
1.5KE200A 171.0 190.0 210.0 1 5 274.0 5.5
1.5KE220 175.0 198.0 242.0 1 5 344.0 4.3
1.5KE220A 185.0 209.0 231.0 1 5 328.0 4.6
1.5KE250 202.0 225.0 275.0 1 5 360.0 5.0
1.5KE250A 214.0 237.0 263.0 1 5 344.0 5.0
Metal hermetically sealed (DO13) version of this diode is available upon request.
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 1500 Watt Specifications - 1.5KE Series Electrical Characteristics - (Continued)
Part Number*
Rated
Standoff
Voltage
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current Ippm#
Vbr (Volts) @It
Vwm (Volts) Min Max (mA) (µA) (Volts) (Amperes)
1.5KE300 243.0 270.0 330.0 1 5 430.0 5.0
1.5KE300A 256.0 285.0 315.0 1 5 414.0 5.0
1.5KE350 284.0 315.0 385.0 1 5 504.0 4.0
1.5KE350A 300.0 360.0 440.0 1 5 574.0 4.0
1.5KE400 324.0 360.0 440.0 1 5 574.0 4.0
1.5KE400A 342.0 380.0 420.0 1 5 548.0 4.0
1.5KE440 356.0 396.0 484.0 1 5 631.0 2.4
1.5KE440A 376.0 418.0 462.0 1 5 600.0 2.6
Metal hermetically sealed (DO13) version of this diode is available upon request.
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 1500 Watt Specifications - 1.5KE Series Features
1.5KE Series Features
·1500 watt peak pulse power dissipation
·Avaliable in voltages from 6.8V to 400V
·Unidirectional and Bidirectional
·Glass passivated junction
·Low clamping factor
·Avaliable in bulk or tape and reel (Reel quantity = 1,500 pieces)
·Each device 100% surge tested
·Metal hermetically sealed (DO13) version of this diode is available upon request.
Absolute Maximum Ratings
·Peak pulse power dissipation (Pppm) at 25°C................................................................................ 1500W
·Steady state power dissipation at lead temperature = 75°C (Lead length 3/8" min.)............................ 5W
·Operating and storage temperatures.............................................................................. -55°C to + 175°C
Mechanical Dimensions
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 3000 Watt Specifications - 3KP Series Electrical Characteristics
Part
Number*
Rated
Standoff
Voltage
Vwm
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Vbr (Volts) @It
(Volts) Min Max (mA) (µA) (Volts) (Amperes)
3KP5.0 5.00 6.40 7.55 10 1000 9.6 312.5
3KP5.0A 5.00 6.40 7.25 10 1000 9.2 326.0
3KP6.0 6.00 6.67 8.45 10 1000 11.4 263.2
3KP6.0A 6.00 6.67 7.67 10 1000 10.3 291.3
3KP6.5 6.50 7.22 9.14 10 500 12.3 243.9
3KP6.5A 6.50 7.22 8.30 10 500 11.2 267.9
3KP7.0 7.00 7.78 9.86 10 200 13.3 225.6
3KP7.0A 7.00 7.78 8.95 10 200 12.0 250.0
3KP7.5 7.50 8.33 10.67 1100 14.3 209.8
3KP7.5A 7.50 8.33 9.58 1100 12.9 232.6
3KP8.0 8.00 8.89 11.30 150 15.0 220.0
3KP8.0A 8.00 8.89 10.23 150 13.6 220.6
3KP8.5 8.50 9.44 11.92 125 15.9 188.8
3KP8.5A 8.50 9.44 10.82 125 14.4 208.4
3KP9.0 9.00 10.00 12.60 110 16.9 177.4
3KP9.0A 9.00 10.00 11.50 110 15.4 194.8
3KP10 10.00 11.10 14.10 1 5 18.8 159.6
3KP10A 10.00 11.10 12.80 1 5 17.0 176.4
3KP11 11.00 12.20 15.40 1 5 20.1 149.2
3KP11A 11.00 12.20 14.00 1 5 18.2 184.8
3KP12 12.00 13.30 16.90 1 5 22.0 136.4
3KP12A 12.00 13.30 15.30 1 5 19.9 150.6
3KP13 13.00 14.40 18.20 1 5 23.8 126.0
3KP13A 13.00 14.40 16.50 1 5 21.5 139.4
3KP14 14.00 15.60 19.80 1 5 25.8 116.2
3KP14A 14.00 15.60 17.90 1 5 23.2 129.4
3KP15 15.00 16.70 21.10 1 5 26.9 111.6
3KP15A 15.00 16.70 19.20 1 5 24.4 123.0
Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 3000 Watt Specifications - 3KP Series Electrical Characteristics - (Continued)
Part
Number*
Rated
Standoff
Voltage
Vwm
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Vbr (Volts) @It
(Volts) Min Max (mA) (µA) (Volts) (Amperes)
3KP16 16.00 17.80 22.60 1 5 28.8 104.2
3KP16A 16.00 17.80 20.50 1 5 26.0 115.4
3KP17 17.00 18.90 23.90 1 5 30.5 98.4
3KP17A 17.00 18.90 21.70 1 5 27.6 106.6
3KP18 18.00 20.00 25.30 1 5 32.2 93.2
3KP18A 18.00 20.00 23.30 1 5 29.2 102.8
3KP20 20.00 22.20 28.10 1 5 35.8 83.8
3KP20A 20.00 22.20 25.50 1 5 32.4 92.6
3KP22 22.00 24.40 30.90 1 5 39.4 76.2
3KP22A 22.00 24.40 28.00 1 5 35.5 84.4
3KP24 24.00 26.70 33.80 1 5 43.0 69.8
3KP24A 24.00 26.70 30.70 1 5 38.9 77.2
3KP26 26.00 28.90 36.60 1 5 46.6 64.4
3KP26A 26.00 28.90 33.20 1 5 42.1 71.2
3KP28 28.00 31.10 39.40 1 5 50.0 60.0
3KP28A 28.00 31.10 35.80 1 5 45.4 66.0
3KP30 30.00 33.30 42.20 1 5 53.5 56.0
3KP30A 30.00 33.30 38.30 1 5 48.4 62.0
3KP33 33.00 36.70 46.50 1 5 59.0 50.4
3KP33A 33.00 36.70 42.20 1 5 53.3 56.2
3KP36 36.00 40.00 50.70 1 5 64.3 46.6
3KP36A 36.00 40.00 46.00 1 5 58.1 51.6
3KP40 40.00 44.40 53.30 1 5 71.4 42.0
3KP40A 40.00 44.40 51.10 1 5 64.5 46.4
3KP43 43.00 47.80 60.50 1 5 76.7 39.2
3KP43A 43.00 47.80 54.90 1 5 69.4 43.2
3KP45 45.00 50.00 63.30 1 5 80.3 37.4
3KP45A 45.00 50.00 57.50 1 5 72.7 41.2
Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 3000 Watt Specifications - 3KP Series Electrical Characteristics - (Continued)
Part
Number*
Rated
Standoff
Voltage
Vwm
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Vbr (Volts) @It
(Volts) Min Max (mA) (µA) (Volts) (Amperes)
3KP48 48.00 53.30 67.50 1 5 85.5 35.0
3KP48A 48.00 53.30 61.30 1 5 77.4 38.8
3KP51 51.00 56.70 71.80 1 5 91.1 37.0
3KP51A 51.00 56.70 65.20 1 5 82.4 36.4
3KP54 54.00 60.00 76.00 1 5 96.3 31.2
3KP54A 54.00 60.00 69.00 1 5 87.1 34.4
3KP58 58.00 64.40 81.60 1 5 103.0 29.2
3KP58A 58.00 64.40 74.10 1 5 93.6 32.0
3KP60 60.00 66.70 84.50 1 5 107.0 28.0
3KP60A 60.00 66.70 76.70 1 5 96.8 31.0
3KP64 64.00 71.10 90.10 1 5 114.0 26.4
3KP64A 64.00 71.10 81.80 1 5 103.0 29.2
3KP70 70.00 77.80 98.60 1 5 125.0 24.0
3KP70A 70.00 77.80 89.50 1 5 113.0 26.6
3KP75 75.00 83.30 105.70 1 5 134.0 22.4
3KP75A 75.00 83.30 98.80 1 5 121.0 24.8
3KP78 78.00 86.70 109.80 1 5 139.0 21.6
3KP78A 78.00 86.70 99.70 1 5 126.0 22.8
3KP85 85.00 94.40 119.20 1 5 151.0 19.8
3KP85A 85.00 94.40 108.20 1 5 137.0 20.8
3KP90 90.00 100.00 126.50 1 5 160.0 18.8
3KP90A 90.00 100.00 115.50 1 5 146.0 20.6
3KP100 100.00 111.00 141.00 1 5 179.0 16.6
3KP100A 100.00 111.00 128.00 1 5 162.0 18.6
3KP110 110.00 122.00 154.50 1 5 196.0 15.4
3KP110A 110.00 122.00 140.50 1 5 177.0 16.8
3KP120 120.00 133.00 169.00 1 5 214.0 14.0
3KP120A 120.00 133.00 153.00 1 5 193.0 15.6
Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 3000 Watt Specifications - 3KP Series Electrical Characteristics - (Continued)
Part
Number*
Rated
Standoff
Voltage
Vwm
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Vbr (Volts) @It
(Volts) Min Max (mA) (µA) (Volts) (Amperes)
3KP130 130.00 144.00 182.50 1 5 231.0 13.0
3KP130A 130.00 144.00 165.50 1 5 209.0 14.4
3KP150 150.00 167.00 211.50 1 5 268.0 11.2
3KP150A 150.00 167.00 192.50 1 5 243.0 12.4
3KP160 160.00 178.00 226.00 1 5 287.0 10.4
3KP160A 160.00 178.00 205.00 1 5 259.0 11.6
3KP170 170.00 189.00 239.50 1 5 304.0 9.8
3KP170A 170.00 189.00 217.50 1 5 275.0 11.0
Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 3000 Watt - 3KP Series Features
3KP Series Features
3000 watt peak pulse power dissipation
Avaliable in voltages from 5.0V to 170V
Unidirectional and Bidirectional
Glass passivated junction
Low clamping factor
Avaliable in bulk or tape and reel (Reel quantity = 800 pieces)
Each device 100% surge tested
Absolute Maximum Ratings
Peak pulse power dissipation (Pppm) at 25°C................................................................................ 3000W
Steady state power dissipation at lead temperature = 75°C (Lead length 3/8" min.)............................ 8W
Operating and storage temperatures.............................................................................. -55°C to + 175°C
UL497B, File # E135015
Mechanical Dimensions
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 5000 Watt Specifications - 5KP Series Electrical Characteristics
Part
Number*
Rated
Standoff
Voltage
Vwm
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Temperature
Coefficient
of Vbr
Vbr (Volts) @It
(Volts) Min Max (mA) (µA) (Volts) (Amperes) (mV/°C)
%5KP5.0 5.0 6.40 7.30 50 5000 9.6 520.0 4.0
%5KP5.0A 5.0 6.40 7.00 50 5000 9.2 543.0 4.0
%5KP6.0 6.0 6.67 8.15 50 5000 11.4 439.0 4.0
%5KP6.0A 6.0 6.67 7.37 50 5000 10.3 485.0 4.0
5KP6.5 6.5 7.22 8.82 50 2000 12.3 407.0 4.0
5KP6.5A 6.5 7.22 7.98 50 2000 11.2 447.0 4.0
5KP7.0 7.0 7.78 9.51 50 1000 13.3 378.0 5.0
5KP7.0A 7.0 7.78 8.60 50 1000 12.0 417.0 5.0
5KP7.5 7.5 8.33 10.2 5.0 250 14.3 350.0 6.0
5KP7.5A 7.5 8.33 9.21 5.0 250 12.9 388.0 6.0
5KP8.0 8.0 8.89 10.9 5.0 150 15.0 333.0 6.0
5KP8.0A 8.0 8.89 9.83 5.0 150 13.6 367.0 6.0
5KP8.5 8.5 9.44 11.5 5.0 50 15.9 314.0 7.0
5KP8.5A 8.5 9.44 10.4 5.0 50 14.4 347.0 7.0
5KP9.0 9.0 10.0 12.2 5.0 20 16.9 295.0 8.0
5KP9.0A 9.0 10.0 11.1 5.0 20 15.4 325.0 8.0
5KP10 10.0 11.1 13.6 5.0 15 18.8 266.0 9.0
5KP10A 10.0 11.1 12.3 5.0 15 17.0 294.0 9.0
5KP11 11.0 12.2 14.9 5.0 10 20.1 249.0 10.0
5KP11A 11.0 12.2 13.5 5.0 10 18.2 274.0 10.0
5KP12 12.0 13.3 16.3 5.0 10 22.0 227.0 11.0
5KP12A 12.0 13.3 14.7 5.0 10 19.9 251.0 11.0
5KP13 13.0 14.4 17.6 5.0 10 23.8 210.0 12.0
5KP13A 13.0 14.4 15.9 5.0 10 21.5 232.0 12.0
5KP14 14.0 15.6 19.1 5.0 10 25.8 194.0 13.0
5KP14A 14.0 15.6 17.2 5.0 10 23.2 215.0 13.0
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
% = Only available in Uni-Polar.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 5000 Watt Specifications - 5KP Series Electrical Characteristics - (Continued)
Part
Number*
Rated
Standoff
Voltage
Vwm
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Temperature
Coefficient
of Vbr
Vbr (Volts) @It
(Volts) Min Max (mA) (µA) (Volts) (Amperes) (mV/°C)
5KP15 15.0 16.7 20.4 5.0 10 26.9 188.0 15.0
5KP15A 15.0 16.7 18.5 5.0 10 24.4 206.0 15.0
5KP16 16.0 17.8 21.8 5.0 10 28.8 176.0 18.0
5KP16A 16.0 17.8 19.7 5.0 10 26.0 192.0 16.0
5KP17 17.0 18.9 23.1 5.0 10 30.5 164.0 19.0
5KP17A 17.0 18.9 20.9 5.0 10 27.6 181.0 18.0
5KP18 18.0 20.0 24.4 5.0 10 32.2 155.0 20.0
5KP18A 18.0 20.0 22.1 5.0 10 29.2 172.0 19.0
5KP20 20.0 22.2 27.1 5.0 10 35.8 139.0 24.0
5KP20A 20.0 22.2 24.5 5.0 10 32.4 154.0 22.0
5KP22 22.0 24.4 29.8 5.0 10 39.4 127.0 27.0
5KP22A 22.0 24.4 26.9 5.0 10 35.5 141.0 24.0
5KP24 24.0 26.7 32.6 5.0 10 43.0 116.0 30.0
5KP24A 24.0 26.7 29.5 5.0 10 38.9 128.0 27.0
5KP26 26.0 28.9 35.3 5.0 10 46.6 107.0 33.0
5KP26A 26.0 28.9 31.9 5.0 10 42.1 119.0 29.0
5KP28 28.0 31.1 39.0 5.0 10 50.1 99.0 34.0
5KP28A 28.0 31.1 34.4 5.0 10 45.5 110.0 30.0
5KP30 30.0 33.3 40.7 5.0 10 53.5 93.0 38.0
5KP30A 30.0 33.3 36.8 5.0 10 48.4 103.0 35.0
5KP33 33.0 36.7 44.9 5.0 10 59.0 85.0 41.0
5KP33A 33.0 36.7 40.6 5.0 10 53.3 94.0 38.0
5KP36 36.0 40.0 48.9 5.0 10 64.3 78.0 45.0
5KP36A 36.0 40.0 44.2 5.0 10 58.1 86.0 40.0
5KP40 40.0 44.4 54.3 5.0 10 71.4 70.0 50.0
5KP40A 40.0 44.4 49.1 5.0 10 64.5 78.0 45.0
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 5000 Watt Specifications - 5KP Series Electrical Characteristics - (Continued)
Part
Number*
Rated
Standoff
Voltage
Vwm
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Temperature
Coefficient
of Vbr
Vbr (Volts) @It
(Volts) Min Max (mA) (µA) (Volts) (Amperes) (mV/°C)
5KP43 43.0 47.8 58.4 5.0 10 76.7 65.0 54.0
5KP43A 43.0 47.8 52.8 5.0 10 69.4 72.0 49.0
5KP45 45.0 50.0 61.1 5.0 10 80.3 62.0 57.0
5KP45A 45.0 50.0 55.3 5.0 10 72.7 69.0 51.0
5KP48 48.0 53.3 65.2 5.0 10 85.5 58.0 62.0
5KP48A 48.0 53.3 58.9 5.0 10 77.4 65.0 55.0
5KP51 51.0 56.7 69.3 5.0 10 91.1 55.0 65.0
5KP51A 51.0 56.7 62.7 5.0 10 82.4 61.0 60.0
5KP54 54.0 60.0 73.3 5.0 10 96.3 52.0 70.0
5KP54A 54.0 60.0 66.3 5.0 10 87.1 57.0 64.0
5KP58 58.0 64.4 78.7 5.0 10 103.0 49.0 77.0
5KP58A 58.0 64.4 71.2 5.0 10 93.6 53.0 69.0
5KP60 60.0 66.7 81.5 5.0 10 107.0 47.0 79.0
5KP60A 60.0 66.7 73.7 5.0 10 96.8 52.0 70.0
5KP64 64.0 71.1 96.9 5.0 10 114.0 44.0 85.0
5KP64A 64.0 71.1 78.6 5.0 10 103.0 49.0 75.0
5KP70 70.0 77.6 95.1 5.0 10 125.0 40.0 93.0
5KP70A 70.0 77.6 86.0 5.0 10 113.0 44.0 84.0
5KP75 75.0 83.3 102.0 5.0 10 134.0 37.0 100.0
5KP75A 75.0 83.3 92.1 5.0 10 121.0 41.0 90.0
5KP78 78.0 86.7 106.0 5.0 10 139.0 36.0 104.0
5KP78A 78.0 86.7 95.8 5.0 10 126.0 40.0 94.0
5KP85 85.0 94.4 115.0 5.0 10 151.0 33.0 113.0
5KP85A 85.0 94.4 104.0 5.0 10 137.0 36.0 102.0
5KP90 90.0 100.0 122.0 5.0 10 160.0 31.0 120.0
5KP90A 90.0 100.0 111.0 5.0 10 146.0 34.0 109.0
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 5000 Watt Specifications - 5KP Series Electrical Characteristics - (Continued)
Part
Number*
Rated
Standoff
Voltage
Vwm
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Temperature
Coefficient
of Vbr
Vbr (Volts) @It
(Volts) Min Max (mA) (µA) (Volts) (Amperes) (mV/°C)
5KP100 100.0 111.0 136.0 5.0 10 179.0 28.0 134.0
5KP110 110.0 122.0 149.0 5.0 10 196.0 26.0 147.0
5KP120 120.0 133.0 163.0 5.0 10 215.0 23.0 158.0
5KP150 150.0 166.0 204.0 5.0 10 268.0 18.5 200.0
5KP180 180.0 200.0 244.0 5.0 10 320.0 15.0 240.0
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 5000 Watt - 5KP Series Features
5KP Series Features
5000 watt peak pulse power dissipation
Avaliable in voltages from 5.0V to 180V
Unidirectional and Bidirectional
Glass passivated junction
Low clamping factor
Avaliable in bulk or tape and reel (Reel quantity = 1,000 pieces)
Each device 100% surge tested
Absolute Maximum Ratings
Peak pulse power dissipation (Pppm) at 25°C................................................................................ 5000W
Steady state power dissipation at lead temperature = 75°C (Lead length 3/8" min.)............................ 8W
Operating and storage temperatures.............................................................................. -55°C to + 175°C
Mechanical Dimensions
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 15000 Watt Specifications - 15KP Series Electrical Characteristics
Part
Number*
Rated
Standoff
Voltage
Vwm
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Vbr (Volts) @It
(Volts) Min (mA) (µA) (Volts) (Amperes)
15KP17 17 18.9 50 5000 32.2 464.0
15KP17A 17 18.9 50 5000 29.3 512.0
15KP18 18 20.0 50 5000 34.2 439.0
15KP18A 18 20.0 50 5000 30.9 485.0
15KP20 20 22.2 20 1500 37.9 396.0
15KP20A 20 22.2 20 1500 34.3 437.0
15KP22 22 24.4 10 500 41.1 365.0
15KP22A 22 24.4 10 500 37.1 404.0
15KP24 24 26.7 5150 45.0 333.0
15KP24A 24 26.7 5150 40.7 369.0
15KP26 26 28.9 550 48.7 308.0
15KP26A 26 28.9 550 44.0 341.0
15KP28 28 31.1 525 52.4 286.0
15KP28A 28 31.1 525 47.5 316.0
15KP30 30 33.3 515 56.2 267.0
15KP30A 30 33.3 515 50.7 296.0
15KP33 33 36.7 510 60.6 248.0
15KP33A 33 36.7 510 54.8 274.0
15KP36 36 40.0 510 66.0 227.0
15KP36A 36 40.0 510 59.7 251.0
15KP40 40 44.4 510 72.8 206.0
15KP40A 40 44.4 510 65.8 228.0
15KP43 43 47.8 510 77.1 195.0
15KP43A 43 47.8 510 69.7 215.0
15KP45 45 50.0 510 80.7 186.0
15KP45A 45 50.0 510 73.0 205.0
15KP48 48 53.3 510 85.9 175.0
15KP48A 48 53.3 510 77.7 193.0
* = Add "C" or "CA" suffix for bidirectional device types.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 15000 Watt Specifications - 15KP Series Electrical Characteristics - (Continued)
Part
Number*
Rated
Standoff
Voltage
Vwm
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Vbr (Volts) @It
(Volts) Min (mA) (µA) (Volts) (Amperes)
15KP51 51 56.7 510 91.5 164.0
15KP51A 51 56.7 510 82.8 181.0
15KP54 54 60.0 510 96.8 155.0
15KP54A 54 60.0 510 87.5 171.0
15KP58 58 64.4 510 104.0 144.0
15KP58A 58 64.4 510 94.0 160.0
15KP60 60 66.7 510 107.0 140.0
15KP60A 60 66.7 510 97.3 154.0
15KP64 64 71.1 510 115.0 130.0
15KP64A 64 71.1 510 104.0 144.0
15KP70 70 77.8 510 126.0 119.0
15KP70A 70 77.8 510 114.0 132.0
15KP75 75 83.3 510 135.0 111.0
15KP75A 75 83.3 510 122.0 123.0
15KP78 78 86.7 510 140.0 107.0
15KP78A 78 86.7 510 126.0 119.0
15KP85 85 94.4 510 152.0 99.0
15KP85A 85 94.4 510 137.0 109.0
15KP90 90 100.0 510 160.0 94.0
15KP90A 90 100.0 510 146.0 103.0
15KP100 100 111.0 510 179.0 84.0
15KP110 110 122.0 510 196.0 77.0
15KP120 120 133.0 510 214.0 70.0
15KP130 130 144.0 510 231.0 65.0
* = Add "C" or "CA" suffix for bidirectional device types.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 15000 Watt Specifications - 15KP Series Electrical Characteristics - (Continued)
Part
Number*
Rated
Standoff
Voltage
Vwm
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Vbr (Volts) @It
(Volts) Min (mA) (µA) (Volts) (Amperes)
15KP150 150 167.0 510 268.0 56.0
15KP160 160 178.0 510 287.0 52.0
15KP170 170 189.0 510 304.0 49.0
15KP180 180 200.0 510 321.0 47.0
15KP200 200 222.0 510 356.0 42.0
15KP220 220 245.0 510 393.0 38.0
15KP240 240 267.0 510 428.0 35.0
15KP260 260 289.0 510 464.0 32.0
15KP280 280 311.0 510 500.0 30.0
* = Add "C" or "CA" suffix for bidirectional device types.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - 15000 Watt - 15KP Series Features
15KP Series Features
·15000 watt peak pulse power dissipation
·Avaliable in voltages from 17V to 280V
·Unidirectional and Bidirectional
·Glass passivated junction
·Low clamping factor
·Each device 100% surge tested
·Avaliable in bulk or tape and reel (Reel quantity = 1,000 pieces)
Absolute Maximum Ratings
·Peak pulse power dissipation (Pppm) at 25°C.......................................................................... 15000W
·Steady state power dissipation at lead temperature = 75°C (Lead length 3/8" min.).......................... 5W
·Operating and storage temperatures........................................................................... -65°C to + 175°C
Mechanical Dimensions
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - Surface Mount - 600 Watt Specifications - P6SMBJ Series Electrical Characteristics
Part
Number*
Uni
Part
Marking
Bi
Part
Marking
Rated
Standoff
Voltage
Vwm
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Vbr
Min @It
(Volts) (Volts) (mA) (µA) (Volts) (Amperes)
P6SMBJ5.0 KD AD 5.0 6.40 10 800.0 9.6 62.5
P6SMBJ5.0A KE AE 5.0 6.40 10 800.0 9.2 65.2
P6SMBJ6.0 KF AF 6.0 6.67 10 800.0 11.4 52.6
P6SMBJ6.0A KG AG 6.0 6.67 10 800.0 10.3 58.3
P6SMBJ6.5 KH AH 6.5 7.22 10 500.0 12.3 48.7
P6SMBJ6.5A KK AK 6.5 7.22 10 500.0 11.2 53.6
P6SMBJ7.0 KL AL 7.0 7.78 10 200.0 13.3 45.1
P6SMBJ7.0A KM AM 7.0 7.78 10 200.0 12.0 50.0
P6SMBJ7.5 KN AN 7.5 8.33 1100.0 14.3 42.0
P6SMBJ7.5A KP AP 7.5 8.33 1100.0 12.9 46.5
P6SMBJ8.0 KQ AQ 8.0 8.89 150.0 15.0 40.0
P6SMBJ8.0A KR AR 8.0 8.89 150.0 13.6 44.1
P6SMBJ8.5 KS AS 8.5 9.44 120.0 15.9 37.7
P6SMBJ8.5A KT AT 8.5 9.44 120.0 14.4 41.7
P6SMBJ9.0 KU AU 9.0 10.00 110.0 16.9 35.5
P6SMBJ9.0A KV AV 9.0 10.00 110.0 15.4 39.0
P6SMBJ10 KW AW 10.0 11.10 15.0 18.8 31.9
P6SMBJ10A KX AX 10.0 11.10 15.0 17.0 35.3
P6SMBJ11 KY AY 11.0 12.20 15.0 20.1 29.9
P6SMBJ11A KZ AZ 11.0 12.20 15.0 18.2 33.0
P6SMBJ12 LD BD 12.0 13.30 15.0 22.0 27.3
P6SMBJ12A LE BE 12.0 13.30 15.0 19.9 30.2
P6SMBJ13 LF BF 13.0 14.40 15.0 23.8 25.2
P6SMBJ13A LG BG 13.0 14.40 15.0 21.5 27.9
P6SMBJ14 LH BH 14.0 15.60 15.0 25.8 23.3
P6SMBJ14A LK BK 14.0 15.60 15.0 23.2 25.8
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - Surface Mount - 600 Watt Specifications - P6SMBJ Series Electrical Characteristics - (Continued)
Part
Number*
Uni
Part
Marking
Bi
Part
Marking
Rated
Standoff
Voltage
Vwm
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Vbr
Min @It
(Volts) (Volts) (mA) (µA) (Volts) (Amperes)
P6SMBJ15 LL BL 15.0 16.70 15.0 26.9 22.3
P6SMBJ15A LM BM 15.0 16.70 15.0 24.4 24.0
P6SMBJ16 LN BN 16.0 17.80 15.0 28.8 20.8
P6SMBJ16A LP BP 16.0 17.80 15.0 26.0 23.1
P6SMBJ17 LQ BQ 17.0 18.90 15.0 30.5 19.7
P6SMBJ17A LR BR 17.0 18.90 15.0 27.6 21.7
P6SMBJ18 LS BS 18.0 20.00 15.0 32.2 18.6
P6SMBJ18A LT BT 18.0 20.00 15.0 29.2 20.5
P6SMBJ20 LU BU 20.0 22.20 15.0 35.8 16.7
P6SMBJ20A LV BV 20.0 22.20 15.0 32.4 18.5
P6SMBJ22 LW BW 22.0 24.40 15.0 39.4 15.2
P6SMBJ22A LX BX 22.0 24.40 15.0 35.5 16.9
P6SMBJ24 LY BY 24.0 26.70 15.0 43.0 14.0
P6SMBJ24A LZ BZ 24.0 26.70 15.0 38.9 15.4
P6SMBJ26 MD CD 26.0 28.90 15.0 46.6 12.4
P6SMBJ26A ME CE 26.0 28.90 15.0 42.1 14.2
P6SMBJ28 MF CF 28.0 31.10 15.0 50.0 12.0
P6SMBJ28A MG CG 28.0 31.10 15.0 45.4 13.2
P6SMBJ30 MH CH 30.0 33.30 15.0 53.5 11.2
P6SMBJ30A MK CK 30.0 33.30 15.0 46.6 12.4
P6SMBJ33 ML CL 33.0 36.70 15.0 59.0 10.2
P6SMBJ33A MM CM 33.0 36.70 15.0 53.3 11.3
P6SMBJ36 MN CN 36.0 40.00 15.0 64.3 9.3
P6SMBJ36A MP CP 36.0 40.00 15.0 58.1 10.3
P6SMBJ40 MQ CQ 40.0 44.40 15.0 71.4 8.4
P6SMBJ40A MR CR 40.0 44.40 15.0 64.5 9.3
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - Surface Mount - 600 Watt Specifications - P6SMBJ Series Electrical Characteristics - (Continued)
Part
Number*
Uni
Part
Marking
Bi
Part
Marking
Rated
Standoff
Voltage
Vwm
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Vbr
Min @It
(Volts) (Volts) (mA) (µA) (Volts) (Amperes)
P6SMBJ43 MS CS 43.0 47.80 15.0 76.7 7.8
P6SMBJ43A MT CT 43.0 47.80 15.0 69.4 8.6
P6SMBJ45 MU CU 45.0 50.00 15.0 80.3 7.5
P6SMBJ45A MV CV 45.0 50.00 15.0 72.7 8.3
P6SMBJ48 MW CW 48.0 53.30 15.0 85.5 7.0
P6SMBJ48A MX CX 48.0 53.30 15.0 77.4 7.7
P6SMBJ51 MY CY 51.0 56.70 15.0 91.1 6.6
P6SMBJ51A MZ CZ 51.0 56.70 15.0 82.4 7.3
P6SMBJ54 ND DD 54.0 60.00 15.0 96.3 6.2
P6SMBJ54A NE DE 54.0 60.00 15.0 87.1 6.9
P6SMBJ58 NF DF 58.0 64.40 15.0 103.0 5.8
P6SMBJ58A NG DG 58.0 64.40 15.0 93.6 6.4
P6SMBJ60 NH DH 60.0 66.70 15.0 107.0 5.6
P6SMBJ60A NK DK 60.0 66.70 15.0 96.8 6.2
P6SMBJ64 NL DL 64.0 71.10 15.0 114.0 5.3
P6SMBJ64A NM DM 64.0 71.10 15.0 103.0 5.8
P6SMBJ70 NN DN 70.0 77.80 15.0 125.0 4.8
P6SMBJ70A NP DP 70.0 77.80 15.0 113.0 5.3
P6SMBJ75 NQ DQ 75.0 83.30 15.0 134.0 4.5
P6SMBJ75A NR DR 75.0 83.30 15.0 121.0 4.9
P6SMBJ78 NS DS 78.0 86.70 15.0 139.0 4.3
P6SMBJ78A NT DT 78.0 86.70 15.0 126.0 4.7
P6SMBJ85 NU DU 85.0 94.40 15.0 151.0 3.9
P6SMBJ85A NV DV 85.0 94.40 15.0 137.0 4.4
P6SMBJ90 NW DW 90.0 100.00 15.0 160.0 3.8
P6SMBJ90A NX DX 90.0 100.00 15.0 146.0 4.1
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - Surface Mount - 600 Watt Specifications - P6SMBJ Series Electrical Characteristics - (Continued)
Part
Number*
Uni
Part
Marking
Bi
Part
Marking
Rated
Standoff
Voltage
Vwm
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Vbr
Min @It
(Volts) (Volts) (mA) (µA) (Volts) (Amperes)
P6SMBJ100 NY DY 100.0 111.00 15.0 179.0 3.4
P6SMBJ100A NZ DZ 100.0 111.00 15.0 162.0 3.7
P6SMBJ110 PD ED 110.0 122.00 15.0 196.0 3.0
P6SMBJ110A PE EE 110.0 122.00 15.0 177.0 3.4
P6SMBJ120 PF EF 120.0 133.00 15.0 214.0 2.8
P6SMBJ120A PG EG 120.0 133.00 15.0 193.0 3.1
P6SMBJ130 PH EH 130.0 144.00 15.0 231.0 2.6
P6SMBJ130A PK EK 130.0 144.00 15.0 209.0 2.9
P6SMBJ150 PL EL 150.0 167.00 15.0 268.0 2.2
P6SMBJ150A PM EM 150.0 167.00 15.0 243.0 2.5
P6SMBJ160 PN EN 160.0 178.00 15.0 287.0 2.1
P6SMBJ160A PP EP 160.0 178.00 15.0 259.0 2.3
P6SMBJ170 PQ EQ 170.0 189.00 15.0 304.0 2.0
P6SMBJ170A PR ER 170.0 189.00 15.0 275.0 2.2
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - Surface Mount - 600 Watt - P6SMBJ Series Features
P6SMBJ Series Features
600 watt peak pulse power dissipation
Avaliable in voltages from 5.0V to 170V
Unidirectional and bidirectional
Glass passivated junction
Low clamping factor
Each device 100% surge tested
Absolute Maximum Ratings
Peak pulse power dissipation (Pppm) at 25°C................................................................................ 600W
Steady state power dissipation at 25°C ............................................................................................. 5W
Operating and storage temperatures............................................................................ -55°C to + 150°C
Mechanical Characteristics
DO214AA package
UL94V-0 Thermoset Epoxy
Solder plated terminals
Solderable per MIL-STD-750 Method 2026
Mechanical Dimensions
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - Surface Mount - 1500 Watt Specifications - 1.5SMCJ Series Electrical Characteristics
Part
Number*
Uni
Part
Marking
Bi
Part
Marking
Rated
Standoff
Voltage
Vwm
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Vbr Min @It
(Volts) (Volts) (mA) (µA) (Volts) (Amperes)
1.5SMCJ5.0 GDD BDD 5.0 6.40 10 1000 9.6 156.2
1.5SMCJ5.0A GDE BDE 5.0 6.40 10 1000 9.2 163.0
1.5SMCJ6.0 GDF BDF 6.0 6.67 10 1000 11.4 131.6
1.5SMCJ6.0A GDG BDG 6.0 6.67 10 1000 10.3 145.6
1.5SMCJ6.5 GDH BDH 6.5 7.22 10 500 12.3 122.0
1.5SMCJ6.5A GDK BDK 6.5 7.22 10 500 11.2 133.9
1.5SMCJ7.0 GDL BDL 7.0 7.78 10 200 13.3 112.8
1.5SMCJ7.0A GDM BDM 7.0 7.78 10 200 12.0 125.0
1.5SMCJ7.5 GDN BDN 7.5 8.33 1100 14.3 104.9
1.5SMCJ7.5A GDP BDP 7.5 8.33 1100 12.9 116.3
1.5SMCJ8.0 GDQ BDQ 8.0 8.89 150 15.0 100.0
1.5SMCJ8.0A GDR BDR 8.0 8.89 150 13.6 110.3
1.5SMCJ8.5 GDS BDS 8.5 9.44 125 15.9 94.3
1.5SMCJ8.5A GDT BDT 8.5 9.44 120 14.4 104.2
1.5SMCJ9.0 GDU BDU 9.0 10.00 110 16.9 88.7
1.5SMCJ9.0A GDV BDV 9.0 10.00 110 15.4 97.4
1.5SMCJ10 GDW BDW 10.0 11.10 1 5 18.8 79.8
1.5SMCJ10A GDX BDX 10.0 11.10 1 5 17.0 88.2
1.5SMCJ11 GDY BDY 11.0 12.20 1 5 20.1 74.6
1.5SMCJ11A GDZ BDZ 11.0 12.20 1 5 18.2 82.4
1.5SMCJ12 GED BED 12.0 13.30 1 5 22.0 68.2
1.5SMCJ12A GEE BEE 12.0 13.30 1 5 19.9 75.3
1.5SMCJ13 GEF BEF 13.0 14.40 1 5 23.8 63.0
1.5SMCJ13A GEG BEG 13.0 14.40 1 5 21.5 69.7
1.5SMCJ14 GEH BEH 14.0 15.60 1 5 25.8 58.1
1.5SMCJ14A GEK BEK 14.0 15.60 1 5 23.2 64.7
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - Surface Mount - 1500 Watt Specifications - 1.5SMCJ Series Electrical Characteristics -
(Continued)
Part
Number*
Uni
Part
Marking
Bi
Part
Marking
Rated
Standoff
Voltage
Vwm
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Vbr Min @It
(Volts) (Volts) (mA) (µA) (Volts) (Amperes)
1.5SMCJ15 GEL BEL 15.0 16.70 1 5 26.9 55.8
1.5SMCJ15A GEM BEM 15.0 16.70 1 5 24.4 61.5
1.5SMCJ16 GEN BEN 16.0 17.80 1 5 28.8 52.1
1.5SMCJ16A GEP BEP 16.0 17.80 1 5 26.0 57.7
1.5SMCJ17 GEQ BEQ 17.0 18.90 1 5 30.5 49.2
1.5SMCJ17A GER BER 17.0 18.90 1 5 27.6 53.3
1.5SMCJ18 GES BES 18.0 20.00 1 5 32.2 46.6
1.5SMCJ18A GET BET 18.0 20.00 1 5 29.2 51.4
1.5SMCJ20 GEU BEU 20.0 22.20 1 5 35.8 41.9
1.5SMCJ20A GEV BEV 20.0 22.20 1 5 32.4 46.3
1.5SMCJ22 GEW BEW 22.0 24.40 1 5 39.4 38.1
1.5SMCJ22A GEX BEX 22.0 24.40 1 5 35.5 42.2
1.5SMCJ24 GEY BEY 24.0 26.70 1 5 43.0 34.9
1.5SMCJ24A GEZ BEZ 24.0 26.70 1 5 38.9 38.6
1.5SMCJ26 GFD BFD 26.0 28.90 1 5 46.6 32.2
1.5SMCJ26A GFE BFE 26.0 28.90 1 5 42.1 35.6
1.5SMCJ28 GFF BFF 28.0 31.10 1 5 50.0 30.0
1.5SMCJ28A GFG BFG 28.0 31.10 1 5 45.4 33.0
1.5SMCJ30 GFH BFH 30.0 33.30 1 5 53.5 28.0
1.5SMCJ30A GFK BFK 30.0 33.30 1 5 48.4 31.0
1.5SMCJ33 GFL BFL 33.0 36.70 1 5 59.0 25.2
1.5SMCJ33A GFM BFM 33.0 36.70 1 5 53.3 28.1
1.5SMCJ36 GFN BFN 36.0 40.00 1 5 64.3 23.3
1.5SMCJ36A GFP BFP 36.0 40.00 1 5 58.1 25.8
1.5SMCJ40 GFQ BFQ 40.0 44.40 1 5 71.4 21.0
1.5SMCJ40A GFR BFR 40.0 44.40 1 5 64.5 23.2
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - Surface Mount - 1500 Watt Specifications - 1.5SMCJ Series Electrical Characteristics -
(Continued)
Part
Number*
Uni
Part
Marking
Bi
Part
Marking
Rated
Standoff
Voltage
Vwm
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Vbr Min @It
(Volts) (Volts) (mA) (µA) (Volts) (Amperes)
1.5SMCJ43 GFS BFS 43.0 47.80 1 5 76.7 19.6
1.5SMCJ43A GFT BFT 43.0 47.80 1 5 69.4 21.6
1.5SMCJ45 GFU BFU 45.0 50.00 1 5 80.3 18.7
1.5SMCJ45A GFV BFV 45.0 50.00 1 5 72.7 20.6
1.5SMCJ48 GFW BFW 48.0 53.30 1 5 85.5 17.5
1.5SMCJ48A GFX BFX 48.0 53.30 1 5 77.4 19.4
1.5SMCJ51 GFY BFY 51.0 56.70 1 5 91.1 18.5
1.5SMCJ51A GFZ BFZ 51.0 56.70 1 5 82.4 18.2
1.5SMCJ54 GGD BGD 54.0 60.00 1 5 96.3 15.6
1.5SMCJ54A GGE BGE 54.0 60.00 1 5 87.1 17.2
1.5SMCJ58 GGF BGF 58.0 64.40 1 5 103.0 14.6
1.5SMCJ58A GGG BGG 58.0 64.40 1 5 93.6 16.0
1.5SMCJ60 GGH BGH 60.0 66.70 1 5 107.0 14.0
1.5SMCJ60A GGK BGK 60.0 66.70 1 5 96.8 15.5
1.5SMCJ64 GGL BGL 64.0 71.10 1 5 114.0 13.2
1.5SMCJ64A GGM BGM 64.0 71.10 1 5 103.0 14.6
1.5SMCJ70 GGN BGN 70.0 77.80 1 5 125.0 12.0
1.5SMCJ70A GGP BGP 70.0 77.80 1 5 113.0 13.3
1.5SMCJ75 GGQ BGQ 75.0 83.30 1 5 134.0 11.2
1.5SMCJ75A GGR BGR 75.0 83.30 1 5 121.0 12.4
1.5SMCJ78 GGS BGS 78.0 86.70 1 5 139.0 10.8
1.5SMCJ78A GGT BGT 78.0 86.70 1 5 126.0 11.4
1.5SMCJ85 GGU BGU 85.0 94.40 1 5 151.0 9.9
1.5SMCJ85A GGV BGV 85.0 94.40 1 5 137.0 10.4
1.5SMCJ90 GGW BGW 90.0 100.00 1 5 160.0 9.4
1.5SMCJ90A GGX BGX 90.0 100.00 1 5 146.0 10.3
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - Surface Mount - 1500 Watt Specifications - 1.5SMCJ Series Electrical Characteristics -
(Continued)
Part
Number*
Uni
Part
Marking
Bi
Part
Marking
Rated
Standoff
Voltage
Vwm
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Vbr Min @It
(Volts) (Volts) (mA) (µA) (Volts) (Amperes)
1.5SMCJ100 GGY BGY 100.0 111.00 1 5 179.0 8.4
1.5SMCJ100A GGZ BGZ 100.0 111.0 1 5 162.0 9.3
1.5SMCJ110 GHD BHD 110.0 122.0 1 5 196.0 7.7
1.5SMCJ110A GHE BHE 110.0 122.0 1 5 177.0 8.4
1.5SMCJ120 GHF BHF 120.0 133.0 1 5 214.0 7.0
1.5SMCJ120A GHG BHG 120.0 133.0 1 5 193.0 7.9
1.5SMCJ130 GHH BHH 130.0 144.00 1 5 231.0 6.5
1.5SMCJ130A GHK BHK 130.0 144.00 1 5 209.0 7.2
1.5SMCJ150 GHL BHL 150.0 167.00 1 5 268.0 5.6
1.5SMCJ150A GHM BHM 150.0 167.00 1 5 243.0 6.2
1.5SMCJ160 GHN BHN 160.0 178.00 1 5 287.0 5.2
1.5SMCJ160A GHP BHP 160.0 178.00 1 5 259.0 5.8
1.5SMCJ170 GHQ BHQ 170.0 189.00 1 5 304.0 4.9
1.5SMCJ170A GHR BHR 170.0 189.00 1 5 275.0 5.5
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - Surface Mount - 1500 Watt - 1.5SMCJ Series Features
1.5SMCJ Series Features
1500 watt peak pulse power dissipation
Avaliable in voltages from 5.0V to 170V
Unidirectional and bidirectional
Glass passivated junction
Low clamping factor
Each device 100% surge tested
Absolute Maximum Ratings
Peak pulse power dissipation (Pppm) at 25°C................................................................................ 1500W
Operating and storage temperatures............................................................................... -55°C to + 150°C
Mechanical Characteristics
DO214AB package
UL94V-0 Thermoset Epoxy
Solder plated terminals
Solderable per MIL-STD-750 Method 2026
Mechanical Dimensions
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - Surface Mount - 400 Watt Specifications - P4SMAJ Series Electrical Characteristics
Part
Number*
Uni
Part
Marking
Bi
Part
Marking
Rated
Standoff
Voltage
Vwm
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Vbr Min @It
(Volts) (Volts) (mA) (µA) (Volts) (Amperes)
P4SMAJ5.0 HD TD 5.0 6.40 10 800.0 9.6 41.6
P4SMAJ5.0A HE TE 5.0 6.40 10 800.0 9.2 43.5
P4SMAJ6.0 HF TF 6.0 6.67 10 800.0 11.4 35.1
P4SMAJ6.0A HG TG 6.0 6.67 10 800.0 10.3 38.8
P4SMAJ6.5 HH TH 6.5 7.22 10 500.0 12.3 32.5
P4SMAJ6.5A HK TK 6.5 7.22 10 500.0 11.2 35.7
P4SMAJ7.0 HL TL 7.0 7.78 10 200.0 13.3 30.1
P4SMAJ7.0A HM TM 7.0 7.78 10 200.0 12.0 33.3
P4SMAJ7.5 HN TN 7.5 8.33 1100.0 14.3 28.0
P4SMAJ7.5A HP TP 7.5 8.33 1100.0 12.9 31.0
P4SMAJ8.0 HQ TQ 8.0 8.89 150.0 15.0 26.5
P4SMAJ8.0A HR TR 8.0 8.89 150.0 13.6 29.4
P4SMAJ8.5 HS TS 8.5 9.44 110.0 15.9 25.1
P4SMAJ8.5A HT TT 8.5 9.44 110.0 14.4 27.7
P4SMAJ9.0 HU TU 9.0 10.00 15.0 16.9 23.6
P4SMAJ9.0A HV TV 9.0 10.00 15.0 15.4 26.0
P4SMAJ10 HW TW 10.0 11.10 15.0 18.8 21.2
P4SMAJ10A HGX TX 10.0 11.10 15.0 17.0 23.5
P4SMAJ11 HY TY 11.0 12.20 15.0 20.1 20.0
P4SMAJ11A HZ TZ 11.0 12.20 15.0 18.2 22.0
P4SMAJ12 ID UD 12.0 13.30 15.0 22.0 18.1
P4SMAJ12A IE UE 12.0 13.30 15.0 19.9 20.1
P4SMAJ13 IF UF 13.0 14.40 15.0 23.8 16.8
P4SMAJ13A IG UG 13.0 14.40 15.0 21.5 18.6
P4SMAJ14 IH UH 14.0 15.60 15.0 25.8 15.5
P4SMAJ14A IK UK 14.0 15.60 15.0 23.2 17.2
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - Surface Mount - 400 Watt Specifications - P4SMAJ Series Electrical Characteristics - (Continued)
Part
Number*
Uni
Part
Marking
Bi
Part
Marking
Rated
Standoff
Voltage
Vwm
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Vbr Min @It
(Volts) (Volts) (mA) (µA) (Volts) (Amperes)
P4SMAJ15 IL UL 15.0 16.70 15.0 26.9 14.8
P4SMAJ15A IM UM 15.0 16.70 15.0 24.4 16.4
P4SMAJ16 IN UN 16.0 17.80 15.0 28.8 13.8
P4SMAJ16A IP UP 16.0 17.80 15.0 26.0 15.3
P4SMAJ17 IQ UQ 17.0 18.90 15.0 30.5 13.1
P4SMAJ17A IR UR 17.0 18.90 15.0 27.6 14.5
P4SMAJ18 IS US 18.0 20.00 15.0 32.2 12.4
P4SMAJ18A IT UT 18.0 20.00 15.0 29.2 13.7
P4SMAJ20 IU UU 20.0 22.20 15.0 35.8 11.1
P4SMAJ20A IV UV 20.0 22.20 15.0 32.4 12.3
P4SMAJ22 IW UW 22.0 24.40 15.0 39.4 10.1
P4SMAJ22A IX UX 22.0 24.40 15.0 35.5 11.2
P4SMAJ24 IY UY 24.0 26.70 15.0 43.0 9.3
P4SMAJ24A IZ UZ 24.0 26.70 15.0 38.9 10.3
P4SMAJ26 JD VD 26.0 28.90 15.0 46.6 8.6
P4SMAJ26A JE VE 26.0 28.90 15.0 42.1 9.5
P4SMAJ28 JF VF 28.0 31.10 15.0 50.0 8.0
P4SMAJ28A JG VG 28.0 31.10 15.0 45.4 8.8
P4SMAJ30 JH VH 30.0 33.30 15.0 53.5 7.5
P4SMAJ30A JK VK 30.0 33.30 15.0 48.4 8.3
P4SMAJ33 JL VL 33.0 36.70 15.0 59.0 6.8
P4SMAJ33A JM VM 33.0 36.70 15.0 53.3 7.5
P4SMAJ36 JN VN 36.0 40.00 15.0 64.3 6.2
P4SMAJ36A JP VP 36.0 40.00 15.0 58.1 6.9
P4SMAJ40 JQ VQ 40.0 44.40 15.0 71.4 5.6
P4SMAJ40A JR VR 40.0 44.40 15.0 64.5 6.2
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - Surface Mount - 400 Watt Specifications - P4SMAJ Series Electrical Characteristics - (Continued)
Part
Number*
Uni
Part
Marking
Bi
Part
Marking
Rated
Standoff
Voltage
Vwm
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Vbr Min @It
(Volts) (Volts) (mA) (µA) (Volts) (Amperes)
P4SMAJ43 JS VS 43.0 47.80 15.0 76.7 5.2
P4SMAJ43A JT VT 43.0 47.80 15.0 69.4 5.7
P4SMAJ45 JU VU 45.0 50.00 15.0 80.3 5.0
P4SMAJ45A JV VV 45.0 50.00 15.0 72.7 5.5
P4SMAJ48 JW VW 48.0 53.30 15.0 85.5 4.7
P4SMAJ48A JX VX 48.0 53.30 15.0 77.4 5.2
P4SMAJ51 JY VY 51.0 56.70 15.0 91.1 4.4
P4SMAJ51A JZ VZ 51.0 56.70 15.0 82.4 4.9
P4SMAJ54 RD WD 54.0 60.00 15.0 96.3 4.2
P4SMAJ54A RE WE 54.0 60.00 15.0 87.1 4.6
P4SMAJ58 RF WF 58.0 64.40 15.0 103.0 3.9
P4SMAJ58A RG WG 58.0 64.40 15.0 93.6 4.3
P4SMAJ60 RH WH 60.0 66.70 15.0 107.0 3.7
P4SMAJ60A RK WK 60.0 66.70 15.0 96.8 4.1
P4SMAJ64 RL WL 64.0 71.10 15.0 114.0 3.5
P4SMAJ64A RM WM 64.0 71.10 15.0 103.0 3.9
P4SMAJ70 RN WN 70.0 77.80 15.0 125.0 3.2
P4SMAJ70A RP WP 70.0 77.80 15.0 113.0 3.5
P4SMAJ75 RQ WQ 75.0 83.30 15.0 134.0 3.0
P4SMAJ75A RR WR 75.0 83.30 15.0 121.0 3.3
P4SMAJ78 RS WS 78.0 86.70 15.0 139.0 2.9
P4SMAJ78A RT WT 78.0 86.70 15.0 126.0 2.2
P4SMAJ85 RU WU 85.0 94.40 15.0 151.0 2.6
P4SMAJ85A RV WV 85.0 94.40 15.0 137.0 2.9
P4SMAJ90 RW WW 90.0 100.00 15.0 160.0 2.5
P4SMAJ90A RX WX 90.0 100.00 15.0 146.0 2.7
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - Surface Mount - 400 Watt Specifications - P4SMAJ Series Electrical Characteristics - (Continued)
Part
Number*
Uni
Part
Marking
Bi
Part
Marking
Rated
Standoff
Voltage
Vwm
Breakdown Voltage Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Vbr Min @It
(Volts) (Volts) (mA) (µA) (Volts) (Amperes)
P4SMAJ100 RY WY 100.0 111.00 15.0 179.0 2.2
P4SMAJ100A RZ WZ 100.0 111.00 15.0 162.0 2.5
P4SMAJ110 SD XD 110.0 122.00 15.0 196.0 2.0
P4SMAJ110A SE XE 110.0 122.00 15.0 177.0 2.3
P4SMAJ120 SF XF 120.0 133.00 15.0 214.0 1.9
P4SMAJ120A SG XG 120.0 133.00 15.0 193.0 2.0
P4SMAJ130 SH XH 130.0 144.00 15.0 231.0 1.7
P4SMAJ130A SK XK 130.0 144.00 15.0 209.0 1.9
P4SMAJ150 SL XL 150.0 167.00 15.0 268.0 1.5
P4SMAJ150A SM XM 150.0 167.00 15.0 243.0 1.6
P4SMAJ160 SN XN 160.0 178.00 15.0 287.0 1.4
P4SMAJ160A SP XP 160.0 178.00 15.0 259.0 1.5
P4SMAJ170 SQ XQ 170.0 189.00 15.0 304.0 1.3
P4SMAJ170A SR XR 170.0 189.00 15.0 275.0 1.4
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - Surface Mount - 400 Watt - P4SMAJ Series Features
P4SMAJ Series Features
400 watt peak pulse power dissipation
Avaliable in voltages from 5.0V to 170V
Unidirectional and bidirectional
Glass passivated junction
Low clamping factor
Each device 100% surge tested
Absolute Maximum Ratings
Peak pulse power dissipation (Pppm) at 25°C................................................................................ 400W
Operating and storage temperatures............................................................................ -55°C to + 150°C
Mechanical Characteristics
DO214AC package
UL94V-0 Thermoset Epoxy
Solder plated terminals
Solderable per MIL-STD-750 Method 2026
Mechanical Dimensions
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - Surface Mount - 3000 Watt Specifications - 3.0SMCJ Series Electrical Characteristics
Part
Number*
Uni
Part
Marking
Bi
Part
Marking
Breakdown Voltage
@It
Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Rated
Standoff
Voltage
Vwm Vbr Min
(Volts) (Volts) (mA) (µA) (Volts) (Amperes)
3.0SMCJ5.0 HDD IDD 5.0 6.40 10 1000.0 9.6 312.5
3.0SMCJ5.0A HDE IDE 5.0 6.40 10 1000.0 9.2 326.0
3.0SMCJ6.0 HDF IDF 6.0 6.67 10 1000.0 11.4 263.2
3.0SMCJ6.0A HDG IDG 6.0 6.67 10 1000.0 10.3 291.3
3.0SMCJ6.5 HDH IDH 6.5 7.22 10 500.0 12.3 243.9
3.0SMCJ6.5A HDK IDK 6.5 7.22 10 500.0 11.2 267.9
3.0SMCJ7.0 HDL IDL 7.0 7.78 10 200.0 13.3 225.6
3.0SMCJ7.0A HDM IDM 7.0 7.78 10 200.0 12.0 250.0
3.0SMCJ7.5 HDN IDN 7.5 8.33 1 100.0 14.3 209.8
3.0SMCJ7.5A HDP IDP 7.5 8.33 1 100.0 12.9 232.6
3.0SMCJ8.0 HDQ IDQ 8.0 8.89 1 50.0 15.0 200.0
3.0SMCJ8.0A HDR IDR 8.0 8.89 1 50.0 13.6 220.6
3.0SMCJ8.5 HDS IDS 8.5 9.44 1 25.0 15.9 188.8
3.0SMCJ8.5A HDT IDT 8.5 9.44 1 25.0 14.4 208.4
3.0SMCJ9.0 HDU IDU 9.0 10.00 1 10.0 16.9 177.4
3.0SMCJ9.0A HDV IDV 9.0 10.00 1 10.0 15.4 194.8
3.0SMCJ10 HDW IDW 10.0 11.10 1 5.0 18.8 159.6
3.0SMCJ10A HDX IDX 10.0 11.10 1 5.0 17.0 176.4
3.0SMCJ11 HDY IDY 11.0 12.20 1 5.0 20.1 149.2
3.0SMCJ11A HDZ IDZ 11.0 12.20 1 5.0 18.2 184.8
3.0SMCJ12 HED IED 12.0 13.30 1 5.0 22.0 136.4
3.0SMCJ12A HEE IEE 12.0 13.30 1 5.0 19.9 150.6
3.0SMCJ13 HEF IEF 13.0 14.40 1 5.0 23.8 126.0
3.0SMCJ13A HEG IEG 13.0 14.40 1 5.0 21.5 139.4
3.0SMCJ14 HEH IEH 14.0 15.60 1 5.0 25.8 116.2
3.0SMCJ14A HEK IEK 14.0 15.60 1 5.0 23.2 129.4
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - Surface Mount - 3000 Watt Specifications - 3.0SMCJ Series Electrical Characteristics -
(Continued)
Part
Number*
Uni
Part
Marking
Bi
Part
Marking
Breakdown Voltage
@It
Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Rated
Standoff
Voltage
Vwm Vbr Min
(Volts) (Volts) (mA) (µA) (Volts) (Amperes)
3.0SMCJ15 HEL IEL 15.0 16.70 1 5.0 26.9 111.6
3.0SMCJ15A HEM IEM 15.0 16.70 1 5.0 24.4 123.0
3.0SMCJ16 HEN IEN 16.0 17.80 1 5.0 28.8 104.2
3.0SMCJ16A HEP IEP 16.0 17.80 1 5.0 26.0 115.4
3.0SMCJ17 HEQ IEQ 17.0 18.90 1 5.0 30.5 98.4
3.0SMCJ17A HER IER 17.0 18.90 1 5.0 27.6 106.6
3.0SMCJ18 HES IES 18.0 20.00 1 5.0 32.2 93.2
3.0SMCJ18A HET IET 18.0 20.00 1 5.0 29.2 102.8
3.0SMCJ20 HEU IEU 20.0 22.20 1 5.0 35.8 83.8
3.0SMCJ20A HEV IEV 20.0 22.20 1 5.0 32.4 92.6
3.0SMCJ22 HEW IEW 22.0 24.40 1 5.0 39.4 76.2
3.0SMCJ22A HEX IEX 22.0 24.40 1 5.0 35.5 84.4
3.0SMCJ24 HEY IEY 24.0 26.70 1 5.0 43.0 69.8
3.0SMCJ24A HEZ IEZ 24.0 26.70 1 5.0 38.9 77.2
3.0SMCJ26 HFD IFD 26.0 28.90 1 5.0 46.6 64.4
3.0SMCJ26A HFE IFE 26.0 28.90 1 5.0 42.1 71.2
3.0SMCJ28 HFF IFF 28.0 31.10 1 5.0 50.0 60.0
3.0SMCJ28A HFG IFG 28.0 31.10 1 5.0 45.4 66.0
3.0SMCJ30 HFH IFH 30.0 33.30 1 5.0 53.5 56.0
3.0SMCJ30A HFK IFK 30.0 33.30 1 5.0 46.6 62.0
3.0SMCJ33 HFL IFL 33.0 36.70 1 5.0 59.0 50.4
3.0SMCJ33A HFM IFM 33.0 36.70 1 5.0 53.3 56.2
3.0SMCJ36 HFN IFN 36.0 40.00 1 5.0 64.3 46.6
3.0SMCJ36A HFP IFP 36.0 40.00 1 5.0 58.1 51.6
3.0SMCJ40 HFQ IFQ 40.0 44.40 1 5.0 71.4 42.0
3.0SMCJ40A HFR IFR 40.0 44.40 1 5.0 64.5 46.4
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - Surface Mount - 3000 Watt Specifications - 3.0SMCJ Series Electrical Characteristics -
(Continued)
Part
Number*
Uni
Part
Marking
Bi
Part
Marking
Breakdown Voltage
@It
Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Rated
Standoff
Voltage
Vwm Vbr Min
(Volts) (Volts) (mA) (µA) (Volts) (Amperes)
3.0SMCJ43 HFS IFS 43.0 47.80 1 5.0 76.7 39.2
3.0SMCJ43A HFT IFT 43.0 47.80 1 5.0 69.4 43.2
3.0SMCJ45 HFU IFU 45.0 50.00 1 5.0 80.3 37.4
3.0SMCJ45A HFV IFV 45.0 50.00 1 5.0 72.7 41.2
3.0SMCJ48 HFW IFW 48.0 53.30 1 5.0 85.5 35.0
3.0SMCJ48A HFX IFX 48.0 53.30 1 5.0 77.4 38.8
3.0SMCJ51 HFY IFY 51.0 56.70 1 5.0 91.1 37.0
3.0SMCJ51A HFZ IFZ 51.0 56.70 1 5.0 82.4 36.4
3.0SMCJ54 HGD IGD 54.0 60.00 1 5.0 96.3 31.2
3.0SMCJ54A HGE IGE 54.0 60.00 1 5.0 87.1 34.4
3.0SMCJ58 HGF IGF 58.0 64.40 1 5.0 103.0 39.2
3.0SMCJ58A HGG IGG 58.0 64.40 1 5.0 93.6 32.0
3.0SMCJ60 HGH IGH 60.0 66.70 1 5.0 107.0 28.0
3.0SMCJ60A HGK IGK 60.0 66.70 1 5.0 96.8 31.0
3.0SMCJ64 HGL IGL 64.0 71.10 1 5.0 114.0 26.4
3.0SMCJ64A HGM IGM 64.0 71.10 1 5.0 103.0 29.2
3.0SMCJ70 HGN IGN 70.0 77.80 1 5.0 125.0 24.0
3.0SMCJ70A HGP IGP 70.0 77.80 1 5.0 113.0 26.6
3.0SMCJ75 HGQ IGQ 75.0 83.30 1 5.0 134.0 22.4
3.0SMCJ75A HGR IGR 75.0 83.30 1 5.0 121.0 24.8
3.0SMCJ78 HGS IGS 78.0 86.70 1 5.0 139.0 21.6
3.0SMCJ78A HGT IGT 78.0 86.70 1 5.0 126.0 22.8
3.0SMCJ85 HGU IGU 85.0 94.40 1 5.0 151.0 19.8
3.0SMCJ85A HGV IGV 85.0 94.40 1 5.0 137.0 20.8
3.0SMCJ90 HGW IGW 90.0 100.00 1 5.0 160.0 18.8
3.0SMCJ90A HGX IGX 90.0 100.00 1 5.0 146.0 20.6
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - Surface Mount - 3000 Watt Specifications - 3.0SMCJ Series Electrical Characteristics -
(Continued)
Part
Number*
Uni
Part
Marking
Bi
Part
Marking
Breakdown Voltage
@It
Maximum
Stand By
Current
@Vwm+
Id
10/1000µs
Maximum
Clamping
Voltage
@Ippm#
Vc Max
10/1000µs
Rated Peak
Impulse
Current
Ippm#
Rated
Standoff
Voltage
Vwm Vbr Min
(Volts) (Volts) (mA) (µA) (Volts) (Amperes)
3.0SMCJ100 HGY IGY 100.0 111.00 1 5.0 179.0 16.6
3.0SMCJ100A HGZ IGZ 100.0 111.00 1 5.0 162.0 18.6
3.0SMCJ110 HHD IHD 110.0 122.00 1 5.0 196.0 15.4
3.0SMCJ110A HHE IHE 110.0 122.00 1 5.0 177.0 16.8
3.0SMCJ120 HHF IHF 120.0 133.00 1 5.0 214.0 14.0
3.0SMCJ120A HHG IHG 120.0 133.00 1 5.0 193.0 15.6
3.0SMCJ130 HHH IHH 130.0 144.00 1 5.0 231.0 13.0
3.0SMCJ130A HHK IHK 130.0 144.00 1 5.0 209.0 14.4
3.0SMCJ150 HHL IHL 150.0 167.00 1 5.0 268.0 11.2
3.0SMCJ150A HHM IHM 150.0 167.00 1 5.0 243.0 12.4
3.0SMCJ160 HHN IHN 160.0 178.00 1 5.0 287.0 10.4
3.0SMCJ160A HHP IHP 160.0 178.00 1 5.0 259.0 11.6
3.0SMCJ170 HHQ IHQ 170.0 189.00 1 5.0 304.0 9.8
3.0SMCJ170A HHR IHR 170.0 189.00 1 5.0 275.0 11.0
* = Add "C" or "CA" suffix for bidirectional device types.
+ = For Bidirectional Types Having Vwm <= 10V, their Id limit is doubled.
# = See General Information for Impulse Current Waveform.
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - Surface Mount - 3000 Watt - 3.0SMCJ Series Features
3.0SMCJ Series Features
·3000 watt peak pulse power dissipation
·Avaliable in voltages from 5.0V to 170V
·Unidirectional and bidirectional
·Glass passivated junction
·Low clamping factor
·Each device 100% surge tested
Absolute Maximum Ratings
·Peak pulse power dissipation (Pppm) at 25°C................................................................................ 3000W
·Operating and storage temperatures.............................................................................. -55°C to + 150°C
Mechanical Characteristics
·DO214AB package
·UL94V-0 Thermoset Epoxy
·Solder plated terminals
·Solderable per MIL-STD-750 Method 2026
Mechanical Dimensions
World Products Inc. 19654 8th St. East, Sonoma, CA, USA, 95476 . . Phone: (707) 996-5201 . . Fax: (707) 996-3380
TVS Diodes - Circuit Examples
Data Line Protection
AC Line Protection
WXE = World Products RFI Suppressor "X Type" (Across-the-Line)
WYE = World Products RFI Suppressor "Y Type" (Line-to-Ground)
Telecom Circuit Protection
2026 = Joslyn Gas Discharge Tubes represented exclusively by World Products.
