SEK IEC 60 603-13 Number of contacts 6--64 Low-profile male header, angled solder pins Identification No. of contacts Part No. Drawing Male header with angled solder pins SEK Length: 2.9 mm Male header with angled solder pins Length: 4.5 mm 6 09 18 506 323 No. of contacts 6 15.2 12.78 2.54 x 2 = 10 09 18 510 323 10 20.3 17.86 2.54 x 4 = 10.16 14 09 18 514 323 14 25.4 22.94 2.54 x 6 = 15.24 16 09 18 516 323 16 27.9 25.48 2.54 x 7 = 17.78 20 09 18 520 323 20 33.0 30.56 2.54 x 9 = 22.86 26 09 18 526 323 26 40.6 38.18 2.54 x 12 = 30.48 34 09 18 534 323 34 50.8 48.34 2.54 x 16 = 40.64 40 09 18 540 323 40 58.4 55.96 2.54 x 19 = 48.26 50 09 18 550 323 50 71.3 68.66 2.54 x 24 = 60.96 60 09 18 560 323 60 84.0 81.36 2.54 x 29 = 73.66 64 09 18 564 323 64 89.1 86.44 2.54 x 31 = 78.74 6 09 18 506 321* 10 09 18 510 321* 14 09 18 514 321* 16 09 18 516 321* 20 09 18 520 321* 26 09 18 526 321* 34 09 18 534 321* 40 09 18 540 321* 50 09 18 550 321* 60 09 18 560 321* 64 09 18 564 321* For performance level 3 please specify digit For performance level 2 please specify digit > 0.76 m Au (30 inch) on request Identification Dimensions in mm No. of contacts A B E 5.08 Solder pins for 0.9 mm dia. hole 7 6 5 * Part No. Drawing Locking lever for female connector with strain relief Dimensions in mm Strain relief clamp in conjunction with lowprofile male header 09 . 12 When the security of latching is required and space is a premium, these locking levers can be fitted onto the strain relief of the HARTING female connector. * Not normally kept in stock 5) Order 2 per female connector Female connector 09 18 000 99055) Low-profile male header 1) 2) Contact number 1 No polarization slot for 6, 10 or 14 way male header 3) No polarization slot for 6 way male header 4) Pitch tolerance: 0.1