Innovations Embedded Board No:BM2P094FEVK-001 Confidential c 2013 ROHM Co.,Ltd. All Rights Reserved Reference Board Specification Description Input Symbol Min Voltage Vin 90 Frequency fac 47 Typ 50/60 N Load No L d IInputt Power P Output Voltage Vout 4.75 Current Iout 1 Ripple Voltage Vripple Max Unit 264 Vac 63 Hz 50 mW W 5.25 V Condition Vi AC100V/230V VinAC100V/230V A 100 70 mV 20MHz Bandwidth % Output5V 1A 47mm Efficiency 5 2 Board No:BM2P094FEVK-001 40mm Confidential c 2013 ROHM Co.,Ltd. All Rights Reserved Application Schematic 1 2 3 4 N NC V VCC NC GND FB Source N NC D Drain 8 c 2013 ROHM Co.,Ltd. All Rights Reserved 7 6 5 Confidential 3 Board No:BM2P094FEVK-001 Component List Item C3 C15 C25 C27 C29 C30 C31 C32 C33 C35 D1 D2 D3 D4 D11 D12 F1 IC1 L2 LF1 M101 R16 R31 R33 R34 R35 R36 R37 R38 R39 T1 U5 U6 Confidential Spec 0.1uF/X2 0.1uF/25V 2200pF/500V Low-Z 470uF/16V 4 7 F/400V 4.7uF/400V 0uF/50V 2200pF/Y1 4.7uF/400V 0.1uF/25V p 1000pF/16V 800V/1A 800V/1A 800V/1A 800V/1A FRD 650V 0.5A 200V 0.5A 0 5A 2.2mH SBD 90V 5A 1.3/0.5W 220k/0.25W 12k 12k 330 12k 1k 0 10 EE13 4 Board No:BM2P094FEVK-001 Parts name 0.1uF/X2 0.1uF/50V 1608 2200pF/1kV 3225 Low-Z 470uF/16V 4 7 F/400V 4.7uF/400V 4.7uF/50V 2012 X2 2200pF/Y1 4.7uF/400V 0.1uF/50V 1608 1000pF/50V p 1608 1N4007 1N4007 1N4007 1N4007 FRD 800V 1A RR264M 400 RR264M-400 1.6A/AC250V BM2P094F 2.2mH SU9VF-02100 RB095B-90 MCR25JZHF1R30 MCR25JZHJ224 MCR03ERTF1202 MCR03ERTF1202 MCR03ERTJ331 MCR03ERTF1202 MCR03ERTJ102 MCR03ERTJ000 MCR10ERTJ100 YPP1181 TL431 PC817 c 2013 ROHM Co.,Ltd. All Rights Reserved Maker R h Rohm Rohm NEC Tokin Rohm Rohm Rohm Rohm Rohm Rohm R h Rohm Rohm Rohm Rohm Tomita Transformer:YPP1 Transformer:YPP 1181 (EE13 EE13)) 1 10 NP1 9 2 NP2 3 8 NP1 NS1 ND NS2 N2 NS2 7 4 ND 5 NS1 Insulation tape 6 3T Core Tomita C T it 2G8-EE13x12x6.3 2G8 EE13 12 6 3 or compatible tibl Bobbin Tomita TBB347 Vertical/Terminal Pins 5-5(10pins) or compatible AL-Value 79.1 nH/N2 Inductance(1-3pin) 1.336 H15% Coil Terminal Turns Wire Winding Method NP1 `1-2 65 2UEW 0.2 FIT NS1 `6-10 11 TEX-E 0.4 1 Layer FIT ND `5-4 31 2UEW 0.2 1 Layer FIT NS2 `7-9 11 TEX-E 0.4 1 Layer FIT N2 ` `2-3 65 2UEW 0.2 FIT Winding beginningFix by barrier tape Winding endInterpose the line drawn i a right in i ht angle l Winding directionUnification Transformer Specification 5 Measurement Data Vin(V) 90 100 230 264 Confidential Pin(W) 0.034 0.105 1.611 3.222 4.956 6.751 0.034 0.105 1.609 3.204 4.894 6.617 0.033 0.105 1.655 3.229 4.821 6.460 0.032 0.102 1.668 3.288 4.894 6.516 6 Board No:BM2P094FEVK-001 Vout(V) 5.007 5.007 5.003 5.000 4.998 4.996 5.007 5.007 5.002 4.999 4.997 4.995 5.007 5.007 5.002 4.996 4.990 4.985 5.007 5.007 5.002 4.995 4.989 4.983 c 2013 ROHM Co.,Ltd. All Rights Reserved Iout(A) 0 0.01 0.25 0.5 0.75 1 0 0.01 0.25 0.5 0.75 1 0 0.01 0.25 0.5 0.75 1 0 0.01 0.25 0.5 0.75 1 Pout(W) 0 0.050 1.251 2.500 3.748 4.996 0 0.050 1.251 2.500 3.747 4.995 0 0.050 1.250 2.498 3.742 4.985 0 0.050 1.250 2.498 3.742 4.983 (%) 47.5 77.6 77.6 75.6 74.0 47.7 77.7 78.0 76.6 75.5 47.6 75.6 77.4 77.6 77.2 49.0 75.0 76.0 76.5 76.5 Conduction EMI VinAC100V/50Hz Vout5V 1A VinAC230V/50Hz Vout5V 1A Confidential c 2013 ROHM Co.,Ltd. All Rights Reserved 7 Board No:BM2P094FEVK-001 Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2013 ROHM Co., Ltd. All rights reserved. R1102A