Pin Function
Da, Db ECL Data Inputs
SEL ECL Select Inputs
Q, /Q ECL Data Outputs
DESCRIPTION
■3.3V and 5V power supply options
■275ps typical propagation delay
■High bandwidth to 3GHz min.
■75kΩ internal input pulldown resistors
■Q output will default LOW with inputs open or at VEE
■Available in 8-pin SOIC and 10-pin MSOP packages
The SY10EP58V is a 2:1 multiplexer. The device is
pin and functionally equivalent to the SY100EL58 device.
FEATURES
5V/3.3V
2:1 MULTIPLEXER
PIN NAMES
PIN CONFIGURATION/BLOCK DIAGRAM
SY10EP58V
FINAL
1Rev.: A Amendment: /1
Issue Date:
January 2001
1NC
Da
Db
SEL
8 VCC
Q
/Q
VEE
7
6
5
2
3
4
MUX
1
0
Available in 8-Pin SOIC or 10-pin MSOP package
2
SY10EP58V
Micrel
Symbol Rating Value Unit
VCC Power Supply Voltage (VEE = 0) –6.0 to 0 V
VEE Power Supply Voltage (VCC = 0) +6.0 to 0 V
VIInput Voltage (VCC = 0V) –6.0 to 0 V
Input Voltage (VEE = 0V) +6.0 to 0 V
IOUT Output Current –Continuous 50 mA
–Surge 100
TAOperating Temperature Range –40 to +85 °C
Tstore Storage Temperature Range –65 to +150 °C
ABSOLUTE MAXIMUM RATINGS(1)
NOTE:
1. Permanent device damage may occur if ABSOLUTE MAXIMUM RATINGS are exceeded. This is a stress rating only and functional operation is not implied
at conditions other than those detailed in the operational sections of this data sheet. Exposure to ABSOLUTE MAXIMUM RATlNG conditions for extended
periods may affect device reliability.
TA = –40°CT
A = +25°CT
A = +85°C
Symbol Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit
IEE Power Supply Current(3) 20—4020304022—40mA
VOH Output HIGH Voltage(4) –1135 — –0885 –1070 –0945 –0820 –1010 — –0760 mV
VOL Output LOW Voltage(4) –1935 — –1685 –1870 –1745 –1620 –1810 — –1560 mV
VIH Input HIGH Voltage –1210 — –0885 –1145 — –0820 –1085 — –0760 mV
VIL Input LOW Voltage –1935 — –1610 –1870 — –1545 –1810 — –1485 mV
IIH Input HIGH Current — — 150 — — 150 — — 150 µA
IIL Input LOW Current D 0.5 — — 0.5 — — 0.5 — — µA
DC ELECTRICAL CHARACTERISTICS(1)
NOTES:
1. 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test
socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained.
2. Input and output parameters vary 1:1 with VCC.
3. VCC = 0V, VEE = VEE(Min) to VEE(Max), all other pins floating.
4. All loading with 50Ω to VCC – 3.0V.
VCC = 0V; VEE = –5.5V to –3.0V; VCC = 3.0V to 5.5V; VEE = 0V(2)
3
SY10EP58V
Micrel
AC ELECTRICAL CHARACTERISTICS
VCC = 0V; VEE = –5.5V to –3.0V; VCC = 3.0V to 5.5V; VEE = 0V
PRODUCT ORDERING INFORMATION
Ordering Package Operating Package
Code Type Range Marking
SY10EP58VZC Z8-1 Commercial HEP58
SY10EP58VZCTR Z8-1 Commercial HEP58
SY10EP58VKC K10-1 Commercial HP58
SY10EP58VKCTR K10-1 Commercial HP58
TA = –40°CT
A = +25°CT
A = +85°C
Symbol Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit
fMAX Maximum Toggle Frequency(1) TBD — — TBD — — TBD — — mA
tPLH Propagation Delay to
tPHL Output Differential D➝ Q, /Q 170 — 350 190 275 375 210 — 400 ps
SEL➝ Q, /Q 170 — 350 190 275 375 210 — 400 ps
trOutput Rise/Fall Times Q 60 — 190 60 130 200 70 — 220 ps
tf(20% to 80%)
NOTE:
1. fMAX guaranteed for functionality only. VOL and VOH levels are guaranteed at DC only.
4
SY10EP58V
Micrel
10 LEAD MSOP (K10-1)
Rev. 00
5
SY10EP58V
Micrel
8 LEAD PLASTIC SOIC (Z8-1)
Rev. 03
MICREL-SYNERGY 3250 SCOTT BOULEVARD SANTA CLARA CA 95054 USA
TEL + 1 (408) 980-9191 FAX + 1 (408) 914-7878 WEB http://www.synergysemi.com http://www.micrel.com
This information is believed to be accurate and reliable, however no responsibility is assumed by Micrel for its use nor for any infringement of patents or
other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent right of Micrel Inc.
© 2001 Micrel Incorporated