Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (SMD Type)
A±0.2
W
( )reference size
0D±0.5
H
B±0.2
(I)
K
(P) (I)
L+
–
0.3 max.
Pressure Relief (010 and larger)
22
HBj
Capacitance (µF)
Rated voltage code
Series identification
Lot number
Negative polarity
marking (–)
Mark for Lead-Free
products
(Black dot)
● Endurance : 105 °C 2000 h
● Vibration-proof product is available upon request. (08 mm and larger)
● RoHS compliant
Features
Speci cations
Surface Mount Type
Series : HB Type : V
High temperature
Lead-Free re ow (suffix : A✽)
Category temperature range
–40 °C to +105 °C
Rated voltage range 6.3 V.DC to 50 V.DC
Capacitance range 1 µF to 1500 µF
Capacitance tolerance ±20 % (120 Hz/ +20 °C)
Leakage cur rent I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
Dissipation factor (tan d)
Please see the attached characteristics list
Characteristics
at low temperature
Standard
V.DC 6.3 10 16 25 35 50
(Impedance ratio at 120 Hz)
Z(–25 °C)/Z(+20 °C)
432222
Z(–40 °C)/Z(+20 °C)
864433
Miniaturization
product
Z(–25 °C)/Z(+20 °C)
432222
Z(–40 °C)/Z(+20 °C)
1086644
Endurance
After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized
at +20 °C, capacitors shall meet the following limits.
Capacitance change
Within ±20 % of the initial value (16 V.DC or less :
Within ±25 %, Miniaturization product : Within ±35 %)
tan d< 200 % of the initial limit
DC leakage current Within the initial limit
Shelf life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Resistance to
soldering heat
After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change
Within ±10 % of the initial value
tan dWithin the initial limit
DC leakage current Within the initial limit
AEC-Q200 AEC-Q200 compliant
Size
code 0DL A, B H I W P K
B 4.0 5.8±0.3 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35
- 0.20
C 5.0 5.8±0.3 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35
- 0.20
D 6.3 5.8±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
- 0.20
D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
- 0.20
E 8.0 6.2±0.3 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35
- 0.20
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.20
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.20
+ 0.15
+ 0.15
+ 0.15
+ 0.15
+ 0.15
DimensionsMarking
(Unit : mm)
Frequency correction factor for ripple current
Frequency (Hz) 50, 60 120 1 k 10 k to
Correction factor 0.70 1.00 1.30 1.70
R. Voltage
(V.DC) 6.3 10 16 25 35 50
Code j ACEVH
Example : 6.3 V.DC 22 µF
Marking color : BLACK
Mar. 201604
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (SMD Type)
Endurance : 105 °C 2000 h
✽ Size code( ) : Miniaturization product
If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V
· Please refer to the page of “Refl ow Profi le” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Rated
voltage
(V.DC)
Cap.
(±20 %)
(µF)
Case size (mm)
Size✽
code
Specifi cation
Part No. Refl ow
Min. Packaging Q'ty
0DL
Ripple
current
(120 Hz)
(+105 °C)
(mA r.m.s.)
tan d
(120 Hz)
(+20 °C)
Taping
(pcs)
6.3
22 4 5.8 B 26 0.30 EEEHB0J220AR (5) 2000
33 4 5.8 B 29 0.30 EEEHB0J330AR (5) 2000
47 45.8(B)260.50EEEHBJ470UAR (5) 2000
55.8C460.30EEEHB0J470AR (5) 1000
100 55.8(C)420.50EEEHBJ101UAR (5) 1000
6.3 5.8 D 71 0.30 EEEHB0J101AP (5) 1000
220 6.3 5.8 (D) 80 0.50 EEEHBJ221UAP (5) 1000
8 10.2 F 150 0.35 EEEHB0J221AP (7) 500
330 86.2(E)1800.50EEEHBJ331UAP (7) 1000
8 10.2 F 230 0.35 EEEHB0J331AP (7) 500
470 8 10.2 (F) 230 0.50 EEEHBJ471UAP (7) 500
1500 10 10.2 (G) 290 0.50 EEEHBJ152UAP (7) 500
10
33 45.8(B)230.30EEEHBA330UAR (5) 2000
55.8C430.26EEEHB1A330AR (5) 1000
68 6.3 5.8 D 70 0.22 EEEHB1A680AP (5) 1000
100 6.3 5.8 (D) 71 0.30 EEEHBA101UAP (5) 1000
86.2E1100.26EEEHB1A101AP (7) 1000
150 6.3 5.8 (D) 64 0.50 EEEHBA151UAP (5) 1000
220 86.2(E)1100.30EEEHBA221UAP (7) 1000
8 10.2 F 160 0.26 EEEHB1A221AP (7) 500
470 8 10.2 (F) 220 0.35 EEEHBA471UAP (7) 500
10 10.2 G 270 0.26 EEEHB1A471AP (7) 500
16
10 4 5.8 B 28 0.16 EEEHB1C100AR (5) 2000
22 45.8(B)29.50.26EEEHBC220UAR (5) 2000
55.8C390.16EEEHB1C220AR (5) 1000
33 6.3 5.8 D 65 0.16 EEEHB1C330AP (5) 1000
47
55.8(C)390.26EEEHBC470UAR (5) 1000
6.3 5.8 D 70 0.16 EEEHB1C470AP (5) 1000
6.3 7.7 D8 84 0.16 EEEHBC470XAP (5) 900
100 6.3 5.8 (D) 70 0.26 EEEHBC101UAP (5) 1000
8 10.2 F 120 0.20 EEEHB1C101AP (7) 500
220 8 10.2 (F) 150 0.20 EEEHBC221UAP (7) 500
10 10.2 G 210 0.20 EEEHB1C221AP (7) 500
330 10 10.2 G 230 0.20 EEEHB1C331AP (7) 500
470 8 10.2 (F) 240 0.40 EEEHBC471UAP (7) 500
10 10.2 G 340 0.20 EEEHB1C471AP (7) 500
25
4.7 4 5.8 B 22 0.14 EEEHB1E4R7AR (5) 2000
6.8 4 5.8 B 25 0.14 EEEHB1E6R8AR (5) 2000
10 45.8(B)280.16EEEHBE100UAR (5) 2000
55.8C280.14EEEHB1E100AR (5) 1000
22 6.3 5.8 D 55 0.14 EEEHB1E220AP (5) 1000
33 55.8(C)500.20EEEHBE330UAR (5) 1000
6.3 5.8 D 65 0.14 EEEHB1E330AP (5) 1000
47 6.3 5.8 (D) 65 0.20 EEEHBE470UAP (5) 1000
86.2E 910.16EEEHB1E470AP (7) 1000
100 86.2(E)1000.16EEEHBE101UAP (7) 1000
8 10.2 F 130 0.16 EEEHB1E101AP (7) 500
220 8 10.2 (F) 130 0.30 EEEHBE221UAP (7) 500
10 10.2 G 190 0.16 EEEHB1E221AP (7) 500
330 8 10.2 (F) 130 0.30 EEEHBE331UAP (7) 500
10 10.2 G 220 0.16 EEEHB1E331AP (7) 500
470 10 10.2 (G) 230 0.30 EEEHBE471UAP (7) 500
Characteristics list
Mar. 201604
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (SMD Type)
Endurance : 105 °C 2000 h
✽ Size code( ) : Miniaturization product
If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V
· Please refer to the page of “Refl ow Profi le” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Rated
voltage
(V.DC)
Cap.
(±20 %)
(µF)
Case size (mm)
Size✽
code
Specifi cation
Part No. Refl ow
Min. Packaging Q'ty
0DL
Ripple
current
(120 Hz)
(+105 °C)
(mA r.m.s.)
tan d
(120 Hz)
(+20 °C)
Taping
(pcs)
35
4.7 4 5.8 B 21 0.12 EEEHB1V4R7AR (5) 2000
6.8 4 5.8 (B) 25 0.12 EEEHBV6R8UAR (5) 2000
10 5 5.8 C 28 0.12 EEEHB1V100AR (5) 1000
22 6.3 5.8 D 55 0.12 EEEHB1V220AP (5) 1000
33 8 6.2 E 84 0.14 EEEHB1V330AP (7) 1000
47
6.3 7.7 D8 98 0.20 EEEHBV470YAP (5) 900
86.2(E)910.18EEEHBV470UAP (7) 1000
8 10.2 F 98 0.14 EEEHB1V470AP (7) 500
100 8 10.2 (F) 98 0.20 EEEHBV101UAP (7) 500
10 10.2 G 160 0.14 EEEHB1V101AP (7) 500
220 10 10.2 (G) 180 0.14 EEEHBV221UAP (7) 500
50
14 5.8B 100.12EEEHB1H1R0AR (5) 2000
2.2 4 5.8 B 16 0.12 EEEHB1H2R2AR (5) 2000
3.3 4 5.8 B 16 0.12 EEEHB1H3R3AR (5) 2000
4.7 5 5.8 C 23 0.12 EEEHB1H4R7AR (5) 1000
6.8 5 5.8 C 23 0.12 EEEHB1H6R8AR (5) 1000
10 6.3 5.8 D 35 0.12 EEEHB1H100AP (5) 1000
22 6.3 5.8 (D) 35 0.14 EEEHBH220UAP (5) 1000
86.2E 700.12EEEHB1H220AP (7) 1000
33 8 10.2 F 91 0.12 EEEHB1H330AP (7) 500
47
6.3 7.7 D8 63 0.12 EEEHBH470YAP (5) 900
8 10.2 (F) 95 0.12 EEEHBH470UAP (7) 500
10 10.2 G 100 0.12 EEEHB1H470AP (7) 500
100 10 10.2 (G) 250 0.12 EEEHBH101UAP (7) 500
220 10 10.2 (G) 270 0.18 EEEHBH221UAP (7) 500
Characteristics list
Mar. 201604
