THIS DRAWING COVERS PROPRIETARY ITEM AND IS THE PROPERTY OF THE APM-HEXSEAL CORPORATION.
THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE WRITTEN APPROVAL OF AN OFFICER OF THE APM-HEXSEAL CORPORATION.
MAT'L: SILICONE RUBBER
A-A-59588 Class III, Gr.60
MAXIMUM AND MINIMUM MEASURE-
MENTS ARE STATED DIRECTLY ON
EACH DIMENSION.
REV.
FINISH: GRAY
DESCRIPTION
APM-HEXSEAL CORPORATION
BOOT, PUSH BUTTON
SWITCH (NC3030 -2513)
TITLE:
4 : 1
DWG. NO.
CHKD.
DWN.
ENG.
SCALE
DATE
NC3030 -2513
HEXSEAL ®
SPECIFICATIONS
Material: HEXSEALS: Silicone rubber conforms to A-A-59588 Class III,
GR 60 unless otherwise specified.
Mounting Nut: HEXSEALS: Brass, nickel-plated (unless otherwise
noted)
Temperature Range: HEXSEALS: -94°F to +400°F
Pressure Range: Exceeds 15 psi internal and 1500 psi external.
Operational Life: 50,000 actuations (minimum).
Shelf Life: Excess of 25 years.
Resistant to: Salt spray, sunlight, ozone, weather, fungus, and most
acids and lubricating oils
Agency Recognition: E-SEELS and HEXSEALS are UL-listed to UL
Std. 50 types 1-13, and meet CSA standards.
Installation: If a reducing adaptor is required - see page 14 of
HEXSEAL catalog HEX200 for part numbers and drawing.
UPDATED, ADDED ORDER NUMBERS, DWG NO. WAS 12/31/SERIES
CAD COMPUTER GENERATED
H
I
1-21-60M.MORSE
S.ANDREWS
B.GLICKSMAN 1-21-60
1-21-60
W.P.
11-24-76
9-23-02
JMAT'L CHANGED
07-13-09
S.GOK
