17610042801 - HARTING TECHNOLOGY GROUP

ABOUT SWITCHCRAFT, INC.

Switchcraft, Inc. was established in 1946 to manufacture

jacks, plugs and switches, from its original plant located

on West Diversey Street in Chicago.The company moved

to a larger facility at 1328 North Halsted Street in 1948, and

in 1958, the operation moved to 5555 Nor th Elston Avenue,

which is still the headquar ters of the corporation.

Switchcraft is a leading supplier of a broad line of components

for the audio/video, broadcast, telecommunication,

computer, medical, military, appliance, transportation and

instrumentation industr ies.

In the 185,000-square-foot Chicago facility, Switchcraft

manufactures electronic and elecromechanical compo-

nents, including:

•Jacks • Plugs

•Connectors • Jackfields

•Patch Panels • Patch Cords

•Switches • EAC Power

•Molded Cable Assemblies Receptacles

With a basic line of over 5,000 standard products and

thousands of var iations, Switchcraft is proud to offer a

limited lifetime warranty on all products.

Switchcraft markets products both domestically and

inter nationally through a network of manufacturers’

representatives and independent distr ibutors.

In 1999, Switchcraft acquired the Conxall Corporation

located in Villa Park, Illinois. Conxall was founded in 1971

as a manufacturer of sealed connectors for the marine

industr y.Today, the company offers a broad line of custom

cable assemblies and connectors used in marine, industrial,

sensor, communications and transpor tation applications.

For more infor mation contact Conxall at (630) 834-7504, or

visit their website at www.conxall.com.

LIMITED LIFETIME WARRANTY

Switchcraft warrants all of its products to be of sound

design, good materials and workmanship at the time of

manufacture.

Switchcraft will repair or replace at its discretion any product

proven to be defective under nor mal use.

Switchcraft’s liabilty under the ter ms of this warranty is limited

to the repair or replacement of defective products which

have not been damaged through accident, abuse, misuse

or unauthorized repair. Switchcraft shall in no case be liable

for special or consequential damages of any nature.

Switchcraft®...

Consistently Excellent Since 1946sm

ABOUT

CATALOG SECTIONS

Connectors . . . . . . . . . . . 1-78

Jacks & Plugs . . . . . . . . . 79-162

Jack Panels . . . . . . . . . . . 163-238

Patch Cords and

Molded Cable

Assemblies . . . . . . . . . . . 239-268

Switches . . . . . . . . . . . . . 269-318

Index by Part Number . . . 319-328

Visit us on the net:

www.switchcraft.com

* Please visit the product pages on our website for the most up-to-date product information

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

TABLE OF CONTENTS

CONNECTORS AND RECEPTACLES

Q-G® XLR CONNECTORS .........................................................1-30

Q-G® Connector Part Number ing System....................................2

Professional Series Q-G® Connector Part Numbering System.......2

Q-G® Audio Connectors A, AA, AND QGP Series ....................3-4

Part Numbers - Male Cord Plugs/Female Cord Plugs..................4

Q-G® Color Flex Reliefs/Flex Relief .............................................5

AAA XLR Connectors ................................................................6-7

P(*)M Gooseneck Plug, P(*)F Microphone Plug,

R(*)MZ Cord Plug, R(*)FZ Cord Plug ...........................................8

D(*)M, D(*)F and D(*)FD Receptacles..........................................9

T(*)F and T(*)FM Cord Plug With On-Off Switch..........................9

B(*)F Receptacle, C(*)F Receptacle, B(*)M Receptacle,

C(*)M Receptacle........................................................................10

E Series Receptacles .............................................................11-15

EH Series Receptacles ...............................................................16

PQG® Receptacles................................................................17-18

PD Series - Plastic Panel Mount ...........................................19-21

Y3F, Y3FPC, Y3FDPC and Y3MPC Receptacles........................22

F Series Receptacles ............................................................23-24

Q-G® Adapters, Accessories .....................................................25

Q-G® Wall Plate Receptacles ....................................................26

Q-G® Connector-Adapters.....................................................27-28

S*FM Audio Connector-Adapter .................................................28

Audio “Y” Adapters .....................................................................28

DMX Adapter ..............................................................................29

Q-G® Connector-Adapter Receptacles ......................................30

Z Matching Transformers, Series M(*)M, Series L(*)MN ............30

TINI Q-G® MINIATURE CONNECTORS .................................31-37

Tini Q-G® Audio Adapters ..........................................................31

TB(*)M AND TB(*)MB Receptacle,TLP(*) Looping Plug, Straight

Female Looping Plug, Reverse Gender TQG Series .................33

TRA(*)M PC Mount Male Receptacle ........................................34

TRASM*M, TRAPC*M Series ...............................................34-36

TY(*)F and TY(*)FPC Receptacles,TYEF Escutcheons,

TQG(*)F and TQG(*)M Connector Inser ts, TBA(**)

Audio Adapter .............................................................................37

HPC HIGH POWER AUDIO CONNECTORS ...........................38-40

EN3TMini WEATHERTIGHT CONNECTOR SERIES ..............41-45

2 - 8 pin Cord Connector, 9 - 18 pin Cord Connector ................43

2 - 8 pin Panel Connector, 9 - 18 pin Panel Connector .............44

2 - 8 pin Inline Connector, 2 - 8 pin Overmolded Cord

and Inline Connector ..................................................................45

DIN CONNECTORS .................................................................46-55

Plugs .....................................................................................46-48

Panel Mount Receptacles .....................................................48-50

Right Angle PC Mount Receptacles .....................................51-52

Mini-DIN Right-Angle Receptacles, Right-Angle, PC Mount

Receptacles ..........................................................................47-53

SMD Series ................................................................................54

DMD Series ................................................................................55

USB CONNECTORS ................................................................56-57

IEEE 1394 FIREWIRE CONNECTORS ...................................58-59

SLIM-LINE CONNECTORS ......................................................60-64

Cord Plugs .................................................................................60

Slim-Line Connector Par t Number ing System, Cable Clamp and

Strain Relief ................................................................................61

SL40-SL41 Male/Female Cord Plugs .........................................62

SL10-SL17 Male/Female Receptacles .......................................63

SL18 Male/Female Receptacles ................................................64

CB CONNECTORS MICROPHONE CONNECTORS,

MINI-CON MINIATURE CONNECTORS .......................................65

HP75BNC SERIES BNC CONNECTORS ................................66-67

EAC RECEPTACLES ...............................................................68-77

RAPC322 POWER INLET SOCKET .............................................78

JACKS AND PLUGS

JACK SCHEMATICS ................................................................79-80

1/4" LONG FRAME TELEPHONE JACKS ...............................81-85

1/4" Jack Blocks .........................................................................86

BANTAM TYPE® JA CKS ..........................................................87-90

TT-JAX® (.173") Telephone Jacks Bantam Type® ................87-88

TT-JAX® (.173") Telephone Twin Jacks Bantam Type® .............89

TT-JAX® (.173") Telephone Triple Jacks Bantam Type® ............90

RTT Series Miniature Telephone Jacks,

Right Angle, PC Mount .........................................................91-92

.177" Enclosed Jacks .................................................................93

LITTEL JAX® 2- AND 3-CONDUCTOR,

1/4" PHONE JACKS ...............................................................94-109

Hi-D Jax® 2- and 3-Conductor .............................................96-99

Spring Lock PC Ter minals for Hi-D Jax® .................................100

SN Series, RA Series Right-Angle Phone Jacks ..............101-105

500 Series Jack Covers ...........................................................106

Series E (Locking) and Thick Panel Phone Jacks ...................107

1/4" Extension Jacks and 1/4" Speaker Jacks .........................108

1/4" Shielded Phone Jacks, SF-Jax®

Shor t Frame Jacks ...................................................................109

.141" MINIATURE PHONO JACKS .......................................109-111

3.5MM DUAL STEREO JACK ...............................................112-113

3.5MM SINGLE MONO AND STEREO JACKS ...................114-118

3.5MM SINGLE MONO JACKS ...................................................119

2.5MM SINGLE MONO AND STEREO JACKS ..........................120

.101" SUBMINIATURE PHONE JACKS ...............................121-122

RCA PHONO JACKS AND PHONO JACK SETS ................123-129

RIGHT ANGLE MINIATURE POWER JACKS ......................130-133

STRAIGHT MINIATURE POWER JACKS ............................134-135

VJ SERIES VIDEO JACKS ..........................................................136

MVJ SERIES VIDEO JACKS .......................................................137

MIL-TYPE 1/4" PHONE PLUGS ...........................................138-141

Littel Plug® Phone Plugs .........................................................139

MIL-TYPE 1/4" EXTENSION JACKS ...........................................142

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

FAX: 773 792-2129

TABLE OF CONTENTS

TELEPHONE PATCH ADAPTERS ..............................................142

BANTAM TYPE MINIATURE TELEPHONE PLUGS ............143-144

1/4" COMMERCIAL PHONE PLUGS -

LITTEL-PLUG® PLUGS .......................................................145-147

Silent-Plug And Lug® Phone Plugs .........................................148

Audio Loudspeaker and Heavy Duty 1/4"

Commercial Phone Plugs .................................................149-150

.206" Commercial Phone Plugs ...............................................151

1/4" Miti-Plug® Audio Plugs .....................................................152

1/4" Flat Plug Phone Plugs ......................................................153

Right-Angle Phone Plugs .........................................................154

1/4" Lock-Extension Jacks And Plugs ......................................155

3.5MM HEAVY DUTY STEREO PLUGS .....................................156

.141" MINIATURE PHONE PLUGS .............................................157

.097" SUBMINIATURE PHONE PLUGS ......................................158

AUDIO ADAPTERS .....................................................................159

RCA PHONO PLUGS ...........................................................160-161

MINIATURE POWER PLUGS ......................................................162

JACK PANELS, PATCH PANELS, PATCH KITS AND

JACKFIELDS

AUDIO PATCHBAYS .............................................................163-190

Professional Punchdown Ter minal (PPT)..................................163

Front Access MTPFA/TTPFA Series..................................164-165

MTP48K Wired Audio Series .............................................166-167

TTP96K Wired Audio Series..............................................168-169

MTPH/TTPH Harness Audio Series...................................170-173

MTPBP/TTPBP Backpanel Series.....................................174-175

EZ NORM Patchbay Series ...............................................176-177

TT96 EDAC Series .............................................................178-179

TTP96K Patchkit Series ....................................................180-181

MT48K/MT52K Patchkit Series..........................................182-183

MT48/MT52 Patchbay Series .............................................184-185

TTP96AS Patchbay Series ................................................186-187

Q-G®XLR Patchbay Series ................................................188-189

HPC Patchbay Series ................................................................190

RS 422 DATA PATCHBAY SERIES ......................................191-192

VIDEO PATCHBAYS .............................................................193-201

VPP Video Patchbay Series ..............................................193-195

MVP Midsize Video Patchbay Series ................................196-198

VAP Video/Audio Patchbay Series ....................................199-200

MBPK Video/Audio Patchbay Series ........................................201

TELECOM TYPE JACK PANELS .........................................202-238

Long Frame (1/4")Single Row Telephone Jack Panels ....202- 203

Long Frame (1/4") Twin Row Jack Panels ........................204-205

Long Frame (1/4") Modular Twin Row Jack Panels ..........206-209

Long Frame (1/4") Modular 3 Row Jack Panels .......................210

TT-Jax® (.173") Jack Panel Series 1600, A1600,

B1600, C1600 ...................................................................211-214

Modular TT-JAX® (.173") Panels -

Blank Series TT51, TT53, TT56, TT59 .....................................215

TT Module Inser ts - Series TT91, TT92 And TT93 ..................216

Modular TT-Jax® (.173") Jack Panels -Series TT5102000,

TT5202000, TT5502000, TT5602000 ...............................217-218

TT-Jax® (.173") Twin Row and Three Row Jack Panels....219-220

TT-Jax® (.173") Connectorized Jackfields - Series TT,

2-wire, 4-wire, 6-wire .........................................................221-229

TT® Lamps and Jewel Assemblies ..........................................230

Longframe Switchboard Switches ............................................231

Dummy Plugs and Hole Plugs .................................................232

TT® (Bantam) Circuit Guard Plugs ..........................................233

Miniature, Dummy Plugs, Hole Plugs .......................................234

Designation Strips .............................................................235-236

Kwik-Change® Designation Str ips (Double Height) .................237

X-Wide® Vertical Designation Str ips ........................................238

PATCH CORDS AND

MOLDED CABLE ASSEMBLIES

MOLDED CABLE ASSEMBLIES ..........................................239-261

Design Materials and Features ................................................239

3.5MM Molded Cables .............................................................240

Power-Plug Batter y Charger Plugs and Jacks .........................241

Power Plugs and Jacks Part Numbering System .....................242

EN3T MINI Weathertight Overmolded Cable Assemblies ........243

Cordette® and Cord Switch Assemblies ....................................44

Cordette® Switches .................................................................245

DIN Plugs ..........................................................................246-248

MIDI Cables ..............................................................................249

Miniature, Shielded, Molded Tini Q-G® Plugs .........................250

Molded Cable Assemblies for Multi-Pin Interconnection

Part Numbering System ...........................................................251

Standard Multi-Pin Interconnection Cables ..............................252

Micro Plug® Subminiature Phone Plugs ..................................253

Tini Plug® Miniature Phone Plugs ...........................................254

Phono Plugs and Phono Extension Jacks ...............................255

Tini-Extension® Jacks ..............................................................256

Littel Plug® Phone Plugs ..................................................256-257

Extension Jax® Phone Jacks ...................................................257

Cable Clamp Bands, “Y” Junctions ..........................................258

Part Numbering System ...........................................................259

Standard Cable Guide ..............................................................260

Cross Reference Guide ............................................................261

AUDIO/VIDEO PATCHCORDS ............................................262- 267

1/4" Longframe Telephone Patch Cords, MIL Type 1/4" Patch

Cords ........................................................................................262

Combination Patch Cords and MIL Type

1/4" Twin Patch Cords .............................................................263

Miniature TT® Braided Patch Cords .......................................264

Miniature TT® Molded Patch Cords

and Telephone Couplers ..........................................................265

Video Patch Cords ...................................................................266

Broadcast Series 3-Conductor Bantam TT Patch Cords,

Analog-AES/EBU Audio, and RS422 Patching ........................267

SWITCHES

PUSHBUTTON SWITCHES

IBS Series Miniature Keyboard Switches .................................269

IBS Keyboard Switch Pushbuttons ...........................................270

US Series Uniswitch® Switches ...............................................271

BXR Series Box Switch® Switches ..........................................272

Button-Switch® Switches, Tini-Switch® Switches ...................273

Littel-Switch® Switches ............................................................274

Hi-D Switch® PC Mount Switches, DA-Switch Switches .........275

Cord-Switch® Cord Switches, Cordette® Cord Switches ........276

* Please visit the product pages on our website for the most up-to-date product information

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

TABLE OF CONTENTS

iii

Push-Lite® Switches and Indicators .................................277-281

Series PL9000 - PL® Indicators, Pushbutton/Indicator

Screens, Color Filter Snap-Insserts, Optional

Mounting Barriers, Light Divider ...............................................278

Part Numbering System ...........................................................279

Outline Dimensions ...........................................................280-281

SLIDE SWITCHES ...............................................................282-290

General Purpose Slide Switches ......................................284-287

Miniature Slide Switches ...................................................288-290

Side-Slide®/Miniature Slide Switches ......................................290

European Line Voltage Selector Switches ........................291-293

LEVER SWITCHES ..............................................................294-298

GENERAL PURPOSE STACK SWITCHES .........................299-300

MULTIPLE STATION SWITCHES .........................................301-302

Littel® Multi Switch ............................................................303-308

DW Multi-Switch ................................................................309-311

Tini® DW Multi-Switch ......................................................312-313

IBS Multi-Switch - Series IBS ...........................................314-315

Multi-Switch Pushbuttons ..................................................316-317

INDEX BY PART NUMBER ...................................................319-328

* Please visit the product pages on our website for the most up-to-date product information

Field-proven Switchcraft Q-G ®(Quick-Ground) 3- through

7-contact audio connectors with ground terminal and ground

contactors are available in a wide range of plugs and

receptacles f or microphones, test equipment, instrumentation,

computers, video cameras, mixing consoles, tape recorders,

PA and sound reinforcement, stereo systems and man y more

applications.

Switchcraft Q-G®connectors f eature a separ ate ground-terminal

electrically integral with connector shell. Ground continuity

between mating plugs is automatically accomplished through

exclusive “Dual Point” grounding system. Socket and pin

assemblies utilize “wedge-action” to insure firm, reliable

positioning in connector shell. Inser ts are easily removable for

wiring and soldering. High-impact thermoplastic insures long

reliable insert assembly lif e.Female connectors ha v e latch lock

feature to hold connectors firmly together .Plugs and receptacles

are mechanically keyed for proper mating. Q-G (*) Series 3-,

4-, 5-, 6-, and 7-pin/contact connectors offer 4-,

5-, 6-, 7-, and 8-pin contact versatility when ground-ter minal is

used. Switchcraft QGP connectors; are compatible with

3- and 4-contact (Neutrik, Amphenol 91-850 and Excellite

91-450 Series, and Cannon XLR-3, XLR-4):5-contact (Neutrik,

Cannon XLR-5 and Amphenol Excellite 91-450 Series).

Q-G®CONNECTORS

Inser t screw engages as any conventional screw, except it is

lefthand threaded. To disassemble the connector, tur n screw

counterclockwise down into inser t (see illustration).

DESIGN FEATURES

CONSTRUCTION: Sturdy, die-cast zinc with satin nickel

finish or Black-Velvet®finish to withstand hard use – even

abuse.Vel-Tone non-reflective finish on QGP connectors only.

INSERT INSULATION: High-impact, molded thermoplastic

provides high dielectric strength, and superior insulation

resistance.

LOCKING: Latchlock on female plugs and receptacles locks

into groove in mating male connector to prevent accidental

disconnect. Manual release of latchlock is required to

separate connectors. Q-G connectors are also available with

FAS-DISCONNECT detent in place of latchlock.QGP has die-

cast latchlock.

FAS-DISCONNECT: FAS-DISCONNECT detent permits

immediate disconnect of locked connectors with a 4-pound

(1.8 kg) force. FAS-DISCONNECT connectors are not

recommended for use in situations where strong or violent

pulls on cable may occur and cause accidental disconnect.

Available on Q-G connectors only.

DUAL PRESSURE PLATES: A*F and A*M Series provides

secure cable lock and strain relief for all standard size cables.

FLEX RELIEF: TPR cable flex relief bushings on cord plugs

are keyed to shell. Standard bushing opening accepts cables

from .21" to .3" diameter Bushings with other openings

accommodate cables from .105" to .205" diameter and from

.3" to .328" diameter.

CONTACTS: Q-G female connectors are copper alloy,

silver-plated, tarnish-resistant;male contacts are copper alloy,

silver-plated, tarnish-resistant. Gold-plated female contacts

are copper alloy. Male contacts are gold-plated.

WIRING: Large, unique design solder cups make wiring fast

and easy. Certain receptacles are also available with PC

terminals for use with printed circuit boards.

Grounding and Shielding

Tightening the insert screw establishes continuity between

ground terminal, ground contactors and connector housing.

Upon engagement with a mating plug or receptacle, the

ground circuit is automatically connected to the mating shell

through the ground contactor. Any pin or contact can be

grounded by “jumping” it to the ground terminal. Contact

1 engages before all other contacts and disengages after all

other contacts.

Captive Design®Insert Screws

Insert assembly is now readily removed from shell. Note

“Ground Terminal” area – large soldering cups make cable

installation fast and easy. Unitized 1-piece insert eliminates

possible loss of latchlock and spring.

To reassemble, replace insert assembly into shell, align inser t

screw under hole in shell and secure insert by turning insert

screw clockwise.This “wedges” inser t against inter ior of shell

providing a rigid connector assembly and positive electrical

continuity between ground ter minal and shell (see illustration).

SECTIONALIZED VIEW - A3F Plug to B3M Receptacle

MALE RECEPTACLE

FEMALE CONNECTOR

Panel

Ground T erminal

Cable Clamp

Insert

Shell

Strain Relief

Insert set screw

(Shell ground)

Latch Lock

Q-G CONNECTORS

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

QG®PART NUMBERING SYSTEM

Q-G®CONNECTOR PART NUMBERING

PROFESSIONAL SERIES Q-G®CONNECTOR PART NUMBERING SYSTEM

Number of

Series Contacts Gender Options

ACORD PLUG WITH SCREW CABLE CLAMP 3-7 M MALE D FAS-DISCONNECT (FEMALE CONNECTORS)

AA CORD PLUG WITH CRIMP CABLE CLAMP F FEMALE B BLACK EPOXY FINISH

AAA CORD PLUG WITH TWIST ON HANDLE

BFRONT PANEL MOUNT USING NUT FM BOTH ST STRAIGHT PC TAILS

(S SERIES)

CFRONT PANEL MOUNT - CIRCULAR RA RIGHT ANGLE PC TAILS

DFRONT PANEL MOUNT - RECTANGULAR MMOMENTARY SWITCH ACTION

(T SERIES ONLY)

EMODULAR FRONT PANEL MOUNT PC PC TERMINALS (Y SERIES ONLY)

GWALL PLATE - 1 B SERIES MALE NKNURLED COUPLING NUT (L SERIES ONLY)

HWALL PLATE - 2 B SERIES MALES LFLEX RELIEF FOR .250" TO .328" CABLE O.D.

JWALL PLATE - 1 D SERIES FEMALE SSEE NOTE 1.

KWALL PLATE - 2 D SERIES FEMALE AU GOLD CONTACTS

LMICROPHONE ADAPTER - INTERNAL THREAD HHOUSING ONLY

MMICROPHONE ADAPTER - EXTERNAL THREAD OPTIONS SHOWN IN ORDER OF APPEARANCE

NCAP PLUG ZSCREWLESS STRAIN RELIEF

PGOOSENECK MOUNT

QG CONNECTOR INSERT

RRIGHT-ANGLE CORD PLUG

SMALE/FEMALE BARREL ADAPTER

TCORD PLUG WITH ON-OFF SWITCH

WRIGHT-ANGLE PANEL MOUNT

YREAR PANEL MOUNT

NOTE 1: S HAS DIFFERENT DESIGNATIONS DEPENDING ON THE SERIES.

FOR A, AA, AND T SERIES: SMALL FLEX RELIEF FOR .105" TO .205" CABLE OUTSIDE DIAMETER

FOR B, C, AND D SERIES: SANDED FRONT FACE FINISH

FOR G, H, J, AND K SERIES: STAINLESS STEEL WALL PLATE (STANDARD)

FOR N SERIES: SHORTING WIRING INSTALLED

NOTE 2: J, K AND T SERIES AVAILABLE IN FEMALE GENDER ONLY.

G, H, L, M, N, AND W SERIES AVAILABLE IN MALE GENDER ONLY.

Number Of

Series Contacts Model

PROFESSIONAL SERIES 322 FEMALE CORD PLUGS

PROFESSIONAL SERIES CORD PLUG 23 MALE CORD PLUGS

WITH CRIMP CABLE CLAMP 62 RECTANGULAR FEMALE PANEL MOUNT

63 RECTANGULAR MALE PANEL MOUNT

QGP

AQGP

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

Q-G®AUDIO CONNECTORS A, AA, AND QGP SERIES

Q-G ®CORD PLUG CONNECTORS (continued)

QGP connectors (3 contacts only) feature Vel-Tone®

non-reflective finish, gray TPR flex relief and plated

pins/contacts for the most demanding applications.

Preferred by audio professionals the world over, Switchcraft®

QG®connectors feature unsur passed durability and a choice

of finishes and contact platings. Features include:

• High perfor mance inser ts in traditional Switchcraft®green

or black.

• Solder terminals rotated for easier access and soldering.

• All metal housing.

AA Series Only

• Rugged 1-piece cable clamp to relieve pulling and twisting

stresses on terminations.

• No Screws flex relief retention system.

• Integral bump shell grounding system.

SPECIFICATIONS

ELECTRICAL

Contact Resistance: 50 milliohm maximum, per pole.

Current Rating: 3 pole – 15A, 4 pole - 10A, 5 and 6

pole – 7.5A, 7 pole – 5A @ 125VAC.

Insulation Resistance: 1,000 MΩ, minimum.

Dielectric Withstanding Voltage: 1,000 V (rms).

Capacitance: 2 pF between pins and 4 pF between pins

and shell, maximum (AA3M and AA3F).

MECHANICAL

Insertion/Withdrawal Forces: 7 pound maximum,

5 pound nominal, inser tion; 7 pound maximum,

5 pound nominal, withdrawal.

Wire Size: #12 wire gauge solid; #14 wire gauge stranded

(3 contact). #14 wire gauge solid; #16 wire gauge stranded

(4 contact). #16 wire gauge solid; #18 wire gauge stranded

(5 and 6 contact). #18 wire gauge solid; #20 stranded

(7 contact). (Q-G and QGP).

MATERIAL

Q-G CONNECTORS (A AND AA SERIES)

Shell: Die-cast zinc. Satin nickel finish, black velvet.

Insert Insulation: Molded thermoplastic.

Socket Contacts: Silver-plated copper alloy tar nish-resistant;

bifurcated on 3-contact type. Gold is available

Pin Contacts: Silver-plated copper alloy. Resists tar nishing,

and provide excellent electrical conductivity. Gold is available.

Latchlock: High-strength die-cast zinc.

Latch Release: Steel, nickel-plated.

Latch Detent: Formed stainless steel.

Insert Screw: Stainless steel.

Flex Relief: TPR (ther moplastic rubber).

QGP CONNECTORS

Shell: Die-cast zinc, non-reflective gray Vel-Tone®finish.

Socket Contacts: Gold-plated copper alloy

Pin Contact: Gold-plated copper alloy

Easy change

flex relief for

color coding

“No screws”

retention

system

Solder terminals

rotated for easy

access & soldering

Light green, high

performance insert “Dual-point

shell grounding” “No screws”

retention

system

Easy change

flex relief for

color coding

Sleek, stream-

lined shell Cable

clamp Solid pins,

silver plated

for reliability

Bifurcated high

performance

socket contacts

Durable

metal latch

lock

Rugged cable

clamp to ground

(no screws)

Rugged

metal shell Standard nickel

or black finish

Q-G®CORD PLUG CONNECTOR – A, AA AND QGP SERIES

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

QG®CORD PLUGS – A AND QGP SERIES

Standard Q-G®Cord Plugs, Series A(*)F and QGP

Satin Fas- Large

Nickel Black Finish Dis- Flex Insert

Finish Silver 1Gold 1Connect Relief 2QGP Series

nContacts

A3F A3FB A3FBAU ◊A3FD A3FL QGP322 3

A3FS3———— — 3

A4F A4FB A4FBAU ◊A4FD A4FL — 4

A5F A5FB A5FBAU ◊A5FD ◊A5FL — 5

A6F A6FB A6FBAU — — — 6

A7F A7FB A7FBAU — — — 7

Straight female cord plug with

FAS-DIS-CONNECT detent. Straight male cord plug.

A(*)F CORD PLUG A(*)FD CORD PLUG A(*)M CORD PLUG

PART NUMBERS - FEMALE CORD PLUGS

Standard Q-G®Cord Plugs, Series A(*)M and QGP

Satin Large

Nickel Black Finish Flex Insert

Finish Silver 1Gold 1Relief 2QGP Series Contacts

A3M A3MB A3MBAU A3ML QGP323 3

A3MS 3——— — 3

A4M A4MB A4MBAU A4ML — 4

A5M A5MB A5MBAU ◊A5ML — 5

A6M — A6MBAU — — 6

A7M — A7MBAU — — 7

PART NUMBERS - MALE CORD PLUGS

All above part numbers have black flex relief installed. Contact Switchcraft for

color flex relief.

◊Available on special order only; contact Switchcraft for price and deliver y.

*Number of inser t contacts or pins must be specified to complete par t number.

1. Contact plating.

2. Accepts cables from .25" (6.35 mm) to .328" (8.33 mm) diameter

3. Accepts cables from .105" (2.7 mm) to .205" (5.2 mm)

◊Available on special order only; contact Switchcraft for price and deliver y.

AA(*)F CORD PLUG AA(*)FD CORD PLUG AA(*)M CORD PLUG

Q-G®CORD PLUG CONNECTORS (continued)

Straight female cord plug with

standard latchlock. Available in

3-7 pin versions.

Advanced Q-G®Cord Plugs, Series AA(*)F and AQGP

AA3F AA3FB ◊AA3FBAU ◊AA3FD ◊AA3FL ◊AQGP322 3

—— — AA3FLD — 3

◊AA4F ◊AA4FB — ◊AA4FD ◊AA4FL — 4

◊AA5F ◊AA5FB — ◊AA5FD ◊AA5FL — 5

◊AA6F ◊AA6FB — ◊AA6FD ◊AA6FL — 6

◊AA7F ◊AA7FB — ◊AA7FD ◊AA7FL — 7

PART NUMBERS - FEMALE CORD PLUGS Advanced Q-G®Cord Plugs, Series AA(*)M and AQGP

AA3M AA3MB ◊AA3MBAU ◊AA3ML ◊AQGP323 3

◊AA4M — — ◊AA4ML — 4

◊AA5M ◊AA5MB — ◊AA5ML — 5

◊AA6M — — ◊AA6ML — 6

◊AA7M — — ◊AA7ML — 7

PART NUMBERS - MALE CORD PLUGS

All above par t numbers have black flex relief installed. Contact Switchcraft for

color flex relief.

◊Available on special order only; contact Switchcraft for price and delivery.

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

Q-G®COLOR FLEX RELIEFS

Rainbow color cable strain relief bushings can be specified

to match or complement equipment decors or code individual

or grouped connections for quick recognition. On special

order, tan, pink and dark blue are available. Bushings

accommodate cables from .21" to .30" diameter.

Prepackaged, 25 per bag.

Part Numbers Flex Flex

3 Pins/Contacts Relief Relief

Female Male Color Only

A3F A3M Black SR00

◊A3F01 ◊A3M01 Brown SR01

◊A3F02 ◊A3M02 Red SR02

◊A3F03 ◊A3M03 Orange SR03

◊A3F04 ◊A3M04 Yellow SR04

◊A3F05 ◊A3M05 Green SR05

◊A3F06 ◊A3M06 Blue SR06

◊A3F07 ◊A3M07 Violet SR07

◊A3F08 ◊A3M08 Gray SR08

◊A3F09 ◊A3M09 White SR09

◊Special order only; contact Switchcraft for price and delivery.

Flex relief bushing with small opening accommodates

cables from .105" (2.7 mm) to .205" (5.2 mm). Standard

size bushing accepts cables from .210" (5.3 mm) to .300"

(7.6 mm) outside diameter. Bushing with large opening

accommodates cables from .300" (7.6 mm) to .328" (8.3

mm).Larger cables are often needed f or multiple-conductor

instrumentation. Code letter “L” in last or second to last digit

in part number indicates plug with large bushing. Code

letter “S” in last or second to last digit in part number

indicates plug with smaller bushing.

SWITCHCRAFT PART NUMBER ◊K255

Package of 100 cable clamp screws.

◊Special order only; contact Switchcraft for price and delivery.

Q-G®FLEX RELIEF

Q-G®CONNECTORS (continued)

Small Cables

.105 to .205

(2.7) (5.2)

Standard Cables

.210 to .300

(5.3) (7.6)

Large Cables

.300 to .328

(7.6) (8.3)

Q-G®FLEX RELIEF

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

AAA SERIES Q-G®TWIST CONNECTOR

Switchcraft introduces the AAA Series or Q-G®Twist XLR

connectors.The Q-G®Twist Series is av ailable in male or female cord

plug, 3 through 7 pins or contacts.The unique features are the easy

twist on combination handle/strain relief , and the reduced number of

par ts to assemble. With the inser t built into the front shell, and the

strain relief preloaded into the handle, the end user has only two

parts to assemble – slide the handle onto the cable, solder the

terminations, and twist on the handle.As the handle is tightened, the

strain relief tightens around the outer jacket of the cable. A ramp on

the strain relief keeps it from rotating around the cable jacket and

twisting the cable. The strain relief was designed to accommodate

the most popular cable sizes.A rugged die-cast metal handle insures

optimum protection, and increases signal shielding.Popular options

include black and gold finishes, as well as a lower cost plastic

handle version.

FEATURES AND BENEFITS

• Only two pieces to assemble

• Easy twist on handle reduces assembly time

• Rugged die-cast metal handle

• Accepts cable OD’s (.100" – .285")

• Black finish available

• Gold-plated pins/contacts available

• Lower cost plastic handle version available

APPLICATIONS

• Audio

• Medical

• Instrumentation

• Process Controls

SPECIFICATIONS

ELECTRICAL

Contact Resistance: 50 milliohm maximum, per pole.

Current Rating @ 125VAC:

3 pole – 15A

4 pole –10A

5 & 6 pole – 7.5A

7 pole – 5A

Insulation Resistance: 1,000 MΩ, minimum.

Dielectric Withstanding Voltage: 1,000 V (rms)

Capacitance: ≤3 pF between pins and ≤6 pF

between pins and shell, maximum

MECHANICAL

Insertion/Withdrawal Forces: 10 lbs. maximum,

8 lbs. nominal / 7 lbs. maximum, 5 pounds nominal.

Wire Size:

3 Contact

#12 wire gauge solid #14 wire gauge stranded

4 Contact

#14 wire gauge solid #16 wire gauge stranded

5 & 6 Contact

#16 wire gauge solid #18 wire gauge stranded

7 Contact

#18 wire gauge solid #20 wire gauge stranded

MATERIAL

Shell: Die-Cast zinc with nickel finish or black chrome.

Handle: Die cast with nickel finish or black chrome.

Also black ther moplastic handle available.

O Ring: TPR (Ther moplastic r ubber).

Insert Insulation: Molded ther moplastic.

Socket Contacts: Silver plated copper alloy tarnish resistant;

bifurcated on 3 and 4 contact types. Gold is available.

Pin Contacts: Silver plated copper alloy. Resists tar nishing,

and provides excellent electrical conductivity. Gold is available.

Latch lock: High strength die cast zinc.

Strain Relief: TPR

Flex Relief: TPR (Thermoplastic r ubber)

AAA CONNECTORS

Series Pins/Contacts Gender Handle Material Housing Terminal Z

Finish Finish

AAA 3-7 pins F: Female P: Plastic B: Black AU: Gold New Strain Relief

3-7 pins M: Male Blank: Metal Blank: Nickel Blank: Silver

CONNECTOR PART NUMBER SCHEME

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

AAA CONNECTORS (continued)

AAA CONNECTORS

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

CONNECTORS & RECEPTACLES

* Please visit the product pages on our website for the most up-to-date product information

Q-G®CONNECTORS (continued)

R(*)FZ CORD PLUG R(*)MZ CORD PLUG

P(*)F MICROPHONE PLUG P(*)M GOOSENECK PLUG

Part Number Insert Contacts

R3FZ 3

R4FZ 4

R5FZ 5

R6FZ 6

R7FZ 7

Part Number Insert Pins

R3MZ 3

R4MZ 4

R5MZ 5

R6MZ 6

R7MZ 7

Part Number 1Inser t Contacts

◊P3F 3

◊P4F 4

◊P5F 5

Part Number 1Insert Pins

◊P3M 3

◊P4M 4

◊P5M 5

1. Satin Nickel Finish. (standard)

2. Large flex relief accepts cable from .25" to .328" diam

eter. (optional)

3. Gold-plated contacts. (optional)

◊Available on special order only; contact Switchcraft for price and deliver y.

Right angle, female cord mount plug, latching. New style

incorporates an insert that can rotate every 45° for added

flexibility in tight applications. Also utilizes the new strain relief

system with twist-on handle.

Accepts cable O.D.'s .100"–.285"

For black finish, add "B" suffix.

For black/gold finish, add "BAU" suffix.

Right angle, male cord mount plug, latching. New style

incorporates an insert that can be rotated every 45° for added

flexibility in tight applications. Also utilizes the new strain relief

system with twist-on handle.

Female microphone plug for gooseneck mount. Fits standard

gooseneck with external 5/8-27 thread. Microphone plugs

directly into connector. (Gooseneck not supplied.)

Male plug f or goosenec k mount.Fits standard gooseneck with

internal 5/8-27 thread. Use on gooseneck with microphone

plug on opposite end. Plugs directly into female receptacle.

(Gooseneck not supplied.)

Q-G CORD PLUG CONNECTORS

Accepts cable O.D.'s .100"–.285"

For black finish, add "B" suffix.

For black/gold finish, add "BAU" suffix.

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

* Number of inser t contact or pins must be specified to complete par t number.

◊Available on special order only; contact Switchcraft for price and deliver y.

1 Non-reflective gray finish, gold-plated pins.

Q-G®CORD PLUG CONNECTORS AND RECEPTACLES

Part Number Part Number Inser t Contacts

◊T3F ◊T3FL 3

◊T3FM ◊T3FLM 3

◊T4F ◊T4FL 4

◊T4FM ◊T4FLM 4

T(*)F Straight female cord plug with DPDT (2-C) locking

on-off switch; standard latchlock.

T(*)FM Straight female cord plug with SPDT (1-C)

momentar y on-off switch; standard latchlock.

Slide switches rated 500 mA, 125V (AC or DC).Mounting

screws are supplied.

T(*)F AND T(*)FM CORD PLUG WITH ON-OFF SWITCH

D(*)M, D(*)F AND D(*)FD RECEPTACLES

Nickel Black Finish

Finish Silver Gold Detent QGP Series1Pins

D3M D3MB D3MBAU — QGP363 3

D4M D4MB D4MBAU — — 4

D5M D5MB D5MBAU — — 5

D6M D6MB D6MBAU — — 6

D7M D7MB D7MBAU — — 7

D3F D3FB D3FBAU D3FD QGP362 3

D4F D4FB D4FBAU ◊D3FDB — 4

D5F D5FB D5FBAU — — 5

D6F D6FB D6FBAU ◊D6FDB — 6

D7F D7FB D7FBAU — — 7

Q-G CORD PLUG CONNECTORS AND RECEPTACLES

Studio quality black and gold Q-G®receptacle with black

housing and gold contacts is designed for low/stable contact

resistance and withstands corrosion where highest quality is

required for recording and broadcast studio equipment,

consoles, and other applications.

D(*)M SERIES – Male receptacle for panel or chassis

mounting. Special rectangular flange permits close spacing on

crowded panels, has two .136" (3.45mm) diameter

countersunk holes for #5-40 flat head mounting screws (not

supplied). Mounts from front of panel or chassis in .766"

(19.45) diameter hole. Satin nickel finish (Series D*M) or black

finish (Series D*MB, or D*MBAU).

D(*)F SERIES – Female receptacle for panel or chassis

mounting. Flange has two .136" (3.45 mm) diameter

countersunk holes for #5-40 flat head mounting screws (not

supplied).Mounts from front of panel or chassis in .953" (24.21

mm) diameter hole.Series D(*)F has standard latchlock;Series

D(*)FD has FAS-DISCONNECT detent. Satin nickel finish

(Series D*F and D*FD) and “Black-Velvet” finish (Series

D*FBAU).

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

Q-G RECEPTACLES

Q-G®RECEPTACLES (continued)

C(*)M RECEPTACLE

Male receptacle for panel or chassis mounting. Flange has three

.140" (3.57 mm) diameter holes for #5-40 mounting screws (not

supplied). Mounts from front of panel or chassis in .766" (19.45

mm) diameter hole.

Part No. 1Part No.5Inser t Pins

C3M ◊QGP327 3

C4M — 4

C5M — 5

C6M — 6

C7M — 7

1. Satin nickel finish. (standard) 2. “Black-Velvet” finish. (optional) 3. Gold-plated contacts. (optional) 4. Fas-disconnect detent.(optional)

5. Non-reflective gray finish, gold-plated pins. (standard)

Panel-mount female receptacle. Mounts with spanner nut

from front of panels up to .4375" (11.11 mm) thick. Slot in

threaded part of housing permits non-turn mounting.

Requires 1.25" (31.75 mm) diameter minimum mounting

hole. Spanner nut is die-cast zinc with satin nickel finish

(Series B*F) or black finish (Series B*FB).

Part No.1Part No. 2Inser t Contacts

B3F B3FB 3

B4F — 4

B5F — 5

B6F — 6

B7F — 7

B(*)M RECEPTACLE

Part No.1Part No.2Inser t Pins

B3M B3MB 3

B4M — 4

B5M — 5

B6M — 6

B7M — 7

C(*)F RECEPTACLE

Female receptacle for panel or chassis mounting.Flange has

three .140" (3.57 mm) diameter holes for #5-40 mounting

screws (not supplied). Mounts from front of panel or chassis

in 0.953" (24.21 mm) diameter hole.

Part No.1Part No. 5Inser t Contacts

C3F ◊QGP326 3

C4F —4

C5F —5

C6F —6

C7F —7

B(*)F RECEPTACLE

◊Special order only. Contact Switchcraft.

Panel-mount male receptacle. Mounts with locknut from front of

panels up to .250" (6.35 mm) thick. Requires .812" (20.64 mm)

diameter mounting hole. For non-turning mounting, can be keyed

to “D” shaped panel hole, or S3519 mounting adapter can be used.

Satin nickel finish (Series B*M) or black finish (Series B*MB).

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

E Series Q-G®Receptacles are available with quick release

inserts. Quick insert release is accomplished by turning

screw lock from front of insert. Insert can then be removed

from the rear. For PC board applications, insert can be

removed/assembled to the housing while soldered to

the PC board.

E Series receptacles can be specified as complete assemblies,

or as separate inserts and housings. Stocking separate

inserts and housings offer considerable cost and time sav-

ings by minimizing inventory and maximizing configuration

possibilities.

FEATURES

• Replaces Neutrik D Ser ies

• 3-pin contact; male and female types

• Both male and female fit in same panel cutout

• Choice of 4 terminations; solder cups, conical springs,

straight or right angle PC ter minals.

• Inser ts and housings can be specified separately

• Quick release inserts for ease of removal

• Locking receptacles

• Protected ground clip minimizes scooping damage

• Inser t lock detent resists disassembly from shock or

vibration during nor mal handling and transpor tation

• Silver and gold-plated contacts available

• Rugged metal shells; black or satin nickel finishes

• Through-the-shell ground connection and all-metal

shells for greater shielding effectiveness

• Compatible with Switchcraft Q-G ®, QGP and other

connectors with similar configurations

QUICK RELEASE INSERT

In two simple steps, inserts can be released while

housing stays fastened to the panel.

1. With a small screwdriver, twist inser t locking screw

from front of inser t.

2. Remove inser t from the rear of the housing.

TERMINALS

Four ter minations are available on E Series receptacles:

1. Conical Spring Solder terminals – conical spring on

each pin holds wire in place providing constant pressure

during solder ing process.This effectively acts as a third

hand, assuring a high quality solder ter mination.

Housing mounts to panel.

2. Straight PC terminals – direct ter mination to PC

board. Housing mounts to panel.

3. Right-angle PC terminals - direct ter mination to PC

board at a right-angle. Housing mounts to panel.

4. SC - Solder cup

SPECIFICATIONS

ELECTRICAL

Contact Resistance: 50 milliohms maximum, per pole.

Current Rating: 15A

Insulation Resistance: 2 X 106MΩ

Dielectric Resistance: 1,000 V rms

Capacitance: 10 pF

MECHANICAL

Insertion/Withdrawal Forces: 7 pounds maximum/

5 pounds nominal inser tion; 7 pounds maximum/

5 pounds nominal withdrawal.

Life: 10,000 operations (minimum).

ENVIRONMENTAL

Thermal Range: -55° C to +85° C

Humidity: Meets MIL-STD-202F, method 106E.

Thermal Shock: Meets MIL-STD-202F, method 107D.

Salt Spray: Meets MIL-STD-202F, method 101D.

MATERIAL

Shells: Die-cast; satin-nickel or Black Velvet.

Inserts: Glass-filled ther moplastic.

Socket Contacts: Copper alloy, silver- or gold-plated.

Pin Contacts: Copper alloy, silver- or gold-plated.

Latch Release: Steel, nickel-plated.

Insert Locking Cam: Die-cast zinc.

Conical Spring

Solder T erminals Straight PC

Terminals Solder cup

E Series

Receptacles

E SERIES RECEPTACLES

Right Angle

PC T erminals

E SERIES Q-G®RECEPTACLES

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

E SERIES PART NUMBERING SYSTEM

HOUSING ONLY PART NUMBER SCHEME

INSERT ONLY PART NUMBER SCHEME

Series Pins/ Gender Fas-disconnect Termination Housing Terminal

Contacts Option Style Finish Finish

E3-5 pins F: Female D: Fas-disconnect ST: Straight PC ter minals AU: Gold

M: Male Blank: Standard locking RA: Right angle PC ter minals Blank: Silver

SC: Solder cups

Blank: Conical springs*

Series Pins/ Housing Mounting Hole

Contacts Finish Options

EF: Female B: Black M3: M3 x 0.5 thread

M: Male Blank: Nickel 440: #4-40 thread

Blank: Counter-sunk hole

Series Pins/ Gender Fas-disconnect Termination Housing Terminal Mounting Hole

Contacts Option Style Finish Finish Options

E3-5 pins F:Female D: Fas-disconnect ST: Straight PC terminals B: Black AU: Gold M3:M3 x 0.5 thread

M: Male Blank: Standard RA:Right anglePCterminals Blank: Nickel Blank: Silver 440: #4-40 thread

locking SC: Solder cups Blank: Counter-

Blank: Conical springs* sunk hole

CONNECTOR PART NUMBER SCHEME

*3-pin only

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

E SERIES

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

E SERIES (continued)

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

E SERIES

* Please visit the product pages on our website for the most up-to-date product information

E SERIES (continued)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

E SERIES

* Please visit the product pages on our website for the most up-to-date product information

Part Number Description

EHBNC2 BNC to BNC

EHBNCSC BNC to solder cup

EHRCA2 RCA to RCA

EHRCABNC RCA to BNC

EHUSB2 USB to USB

EH13942 IEEE1394 to IEEE1394

EHCAT62 Cat6 to Cat6

The EH Series consist of different styles of popular connectors in

our E Series housing. This allows the end user to punch one single

hole size and populate wall plates, gang assemblies with different

types of connectors. Connector styles include BNC feed-throughs,

RCA feed-throughs, USB feed-throughs, IEEE 1394 Firewire

feed-throughs, BNC to solder cup, and RCA to BNC.

FEATURES

• Utilizes same panel cut-out as E Series QG connectors

• Rugged metal shells

• Available with a wide variety of popular feed-through connectors

EH SERIES RECEPTACLES

EHBNC2

EHRCA2

EHRCABNCEHBNCSC

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

PQG®RECEPTACLES

Q-G®3 pin/contact PC receptacles offer economy, reliability

and performance in amplifiers, audio mixing boards, and

other outboard gear. Choose receptacles with just the right

combination of standard and optional bonus features to tailor

the PQG series to your exact needs.

PQG®RECEPTACLES

STANDARD FEATURES

• UL 94V-0 plastic materials.

• Circuit #1 “makes” first and “breaks” last during

connect/disconnect.

• Positive mechanical polar ization.

• Minimum PC board space required.

• Integral PC board locating posts.

• Mating/unmating cycles in excess of 10,000.

• Mates with Switchcraft Q-G and other compatible

connectors.

OPTIONAL FEATURES

• Positive latch lock or FasDisconnect (female only).

• Shell-to-ground terminal.

• Mounting Plates:

A. Backup Mounting Plate with two, M3 x 0.5 threaded

holes for faster, more r ugged mounting to equipment

panel/chassis.

B.“Tri-Mounting” Plate...plus two bifurcated pcb

retainers with snap-in terminals which perform

three valuable functions:

1. Provide ground connection from panel to PCB.

2. Hold connector securely to PCB during wave-soldering.

3. Add strength between panel/chassis and PCB during

soldering by “wicking” solder through the PCB and up

sides of retainers to assure continuity.

C. Two panel grounds are integral with mounting plate.

PQG3FRA112 PQG3MRA112 PQG3FST112 PQG3MST112

SPECIFICATIONS

Housing: Black, glass-filled thermoplastic, UL 94V-0.

Flange mounting holes are .128 inch diameter

Socket Contacts: Copper alloy, electrotinned.

Pin Contacts: Copper alloy, electrotinned.

Latch Release: Steel, nickel-plated.

Mounting Plate: Copper alloy.

Shell-to-Ground T erminals: Copper alloy, electrotinned.

Latches: Copper alloy, nickel-plated.

Insertion/Withdrawal Forces: 2 pound (nominal).

Contact Resistance: .05 ohms per pole (maximum).

Dielectric Withstanding Voltage: 1,000 V rms for 1 minute.

Insulation Resistance: 104MΩ@ 500 V DC.

Current Capacity: 10A maximum (carr y only).

Operating T emperature: -30°F to 185°F (-34°C to 85°C).

Mechanical Life: 10,000 cycles @ 10 cpm.

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

PQG®SERIES PART NUMBERING SYSTEM

GQP

SERIES

PQG-

Composite QG

TERMINALS

RA - Right Angle,

Bottom Exit

ST - Straight

Rear Exit

GROUND

TERMINAL

0 - None

1 - Installed

MOUNTING PLATE

0 - None

1 - Plate with two,

M3 x 0.5 threaded

holes

2 - Plate with two,

M3 x 0.5 threaded

holes, panel grounds

and PCB retainers

PINS/

CONTACTS

LATCHING

0 - None

1 - Latch Lock

2 - Fas-

Disconnect

(female

only)

GENDER

F - Female

M - Male

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

Q-G®AUDIO RECEPTACLES FOR PC/PANEL MOUNT

PD SERIES - PLASTIC PANEL MOUNT

Q-G®AUDIO RECEPTACLES FOR PC/PANEL MOUNT

Switchcraft offers the PD Series (plastic panel mount) audio

connectors with a wide variety of 3-pin/contact, male and

female types and many terminals for combined PC/panel

mount.Female types off er larger contact area for higher r atings

and longer lif e .P anel mounting may be at users option, either

front or rear .New PD series connectors mate with Switchcraft

Q-G and other compatible types.

PD SERIES FEATURES

• 3 pins/contacts

• Male and female

• Straight and right-angle ter minals

• PC or PC/panel mount

• Front or rear panel mount

• Special PC/solder terminal type with exits at 0° (down,

90° (r ight), 180° (top), and 270° (left)

• Rugged molded black glass-filled ther moplastic housings.

SPECIFICATIONS

Housing: Black molded thermoplastic, glass-filled.

Ground Pin: Copper alloy.

Stamped T erminals/Contacts: Copper alloy, electrotinned.

Screw Machine Terminals/Pins: Copper alloy, silver-plated.

BIFURCATED PC TERMINALS

Bifurcation configuration for PC ter minals on selected

connectors offers these advantages.

1. Provides convenient snap-in retention for mounting.

2. Holds connector securely to PCB during wavesoldering.

3. Adds strength to all ter minal connections by solder

“wicking” through PCB and up sides of terminals.

BIFURCATED HOLD-DOWN FEATURE

FOR ALL PC TERMINALS

PD3FRL1 PD3MRML1

PD3FS2

PD3MS1 PD3FRML1

PD3FRA1

PD3FS2

NEW

Bifurcated

PCB T erminals

Bifurcated

PCB T erminals

See Next Page

for New Solder

Cup Option

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

PD SERIES PART NUMBERING SYSTEM

SERIES

PD GENDER

FEMALE MALE

RA - Right-angle, RML - Right-angle,

Bottom Exit Bottom Exit,

RL - Right-angle, Long Screw

Left exit Mach.Term.

RR - Right-angle, RMS - Right-angle,

Right Exit Bottom Exit,

RU - Right-angle, Shor t Screw

Top Exit Mach.Term.

RML - Right-angle, S-Straight,

Bottom Exit, Rear Exit

Long Screw SC - Solder Cup

Mach.Term.

RMS - Right-angle,

Bottom Exit,

Shor t Screw

Mach.Term.

S-Straight,

Rear Exit

SC - Solder Cup

HOUSING

1-Front Mount

.11" (2.8 mm)

diameter flange

mounting holes

2-Rear Mount

.091" (2.3 mm)

diameter flange

mounting holes

3-Front Mount

.126" (3.2 mm)

diameter flange

mounting holes

PINS/

CONTACTS GENDER

F - Female

M - Male

PD3MS1

3-pin male,

straight (rear exit)

PC terminals.

Front mount.

PD3MRML2

3-pin male, right

angle (bottom exit)

long screw machine

terminals. Panel

mount holes not

countersunk.

PD3FRL1

3-contact female,

right-angle (left exit)

PC/solder terminals.

Ground lug. Front

panel mount.

PD3FRA1

3-contact female,

right-angle (bottom

exit) PC/solder

terminals. Ground

lug. Front panel

mount.

RECOMMENDED PC

BOARD LAYOUT

(Component Side)

RECOMMENDED PC BOARD

LAYOUT (Component Side)

Numbers PD3FRA1, 2, and 3; PD3FRL1, 2, and 3;

PD3FRR1, 2 and 3; PD3FRU1, 2 and 3 (Typical) Numbers PD3FS1, 2, and 3 (Typical)

Bifurcated

PCB Terminals

Bifurcated

PCB Terminals

TERMINALS

Blank=

Silver

terminals

AU=

Gold

terminals

Note: New solder cup

option shown.

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

PD SERIES

RECOMMENDED PC

BOARD LAYOUT

(Component Side)

RECOMMENDED PC

BOARD LAYOUT

(Component Side)

RECOMMENDED PC

BOARD LAYOUT

(Component Side)

RECOMMENDED PC

BOARD LAYOUT

(Component Side)

RECOMMENDED PC

BOARD LAYOUT

(Component Side)

Numbers PD3FRMS1, 2, and 3 (Typical) Numbers PD3FRML1, 2, and 3 (Typical)

Numbers PD3MRML1, 2, and 3 (Typical) Numbers PD3MRMS1, 2, and 3 (Typical)

Numbers PD3MS1, 2, and 3 (Typical)

PD SERIES (continued)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

Series Y(*)MPC. Male receptacle for panel or chassis

mounting escutcheon. PC terminals and standoffs. Rear of

panel mount in .750 inch diameter hole. Maximum panel

thickness:25 inches (6.35 mm);.156 inches (3.96 mm) if YEM

escutcheon is used.

Series Y(*)FPC. Female receptacle for panel or chassis

mounting. PC Ter minal and standoffs. Rear of panel mount in

.875 inch (22.22 mm) diameter hole.

Series Y(*)F . Female receptacle for panel or chassis mounting.

Rear of panel mount in .875 inch (22.22 mm) diameter hole.

Series Y(*)FD,Y(*)FDPC. Female receptacles. Same as Y(*)F

and Y(*)FPC, respectively, except with FAS-DISCONNECT

detent.

Series YEF Escutcheons. Trim escutcheons provide

distinctive panel appearance and can also color code

connections. Available in black (standard), red, green, white,

and yellow. Other colors possible on special order where

production quantities warrant.

ASSEMBLY/MOUNTING

AII receptacles are rear-of-panel mount (units with PC

terminals also mount/ter minate to PC board). Flange fastens

to chassis/panel with two #4-40 machine scre ws (not supplied).

Use of escutcheons is optional.

Install latch release lever (Series Y(*)F and Y(*)FPC) after

receptacle is f astened to chassis/panel.Insert lev er in slot from

front and press inward until it locks (snaps) into place. To

remove lever, depress rear of lever (with screwdriver) through

opening at top rear of housing and pull lever straight out.

SERIES Y(*)F ,Y(3)FPC,Y(*)FD,Y(3)FDPC AND Y(3)MPC RECEPT ACLES

Q-G ®RECEPTACLES

Part Numbers

Female Female Insert Part Number Insert

Latchlock†Detent†Contacts Male†Pins

Y3F Y3FD 3Y3MPC 3

RECEPTACLES

Part Number Color Part Number Color

◊YEF01 Red ◊YEF04 Blue

◊YEF02 Black ◊YEF05 White

◊YEF03 Green ◊YEF08 Yellow

ESCUTCHEONS

†Suffix letters “PC” indicate PC terminals; all others have solder lugs.

SPECIFYING NOTE: YEM02 escutcheon can be ordered on special order ; contact

Switchcraft.

Y3MPC Y3FPC

YEF02

ESCUTCHEONS

Q-G RECEPTACLES

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

Switchcraft now offers the F Series. Available in male and

female, the receptacles can be mounted from the rear of the

panel. Features include an all metal housing with a ferrite

disk for added EMI/RMI shielding. Both male and female

connectors can be mounted vertical or horizontal to the PC

board. All connectors have a PC-board retention feature to

hold the connectors firmly to the PC board pr ior to soldering.

See the char t below for par t numbers.

F SERIES FEATURES

• Replaces Cannon XLM-Series

• 3-pin contact; male and female types

• Both male and female fit in same panel cutout

• Locking receptacles

• Silver-plated contacts

• Rugged metal shells; satin nickel finishes

• Through-the-shell ground connection and all-metal shells

for greater shielding effectiveness

• Compatible with Switchcraft Q-G®, QGP and other

connectors with similar configurations

• Added EMI/RFI ferr ite shield

SPECIFICATIONS:

ELECTRICAL

Contact Resistance: 50 milliohms maximum, per pole.

Current Rating: 15A

Insulation Resistance: 1,000 MΩ

Dielectric Resistance: 1,000 V rms

Capacitance: 2 to 4 pF

MECHANICAL

Insertion/Withdrawal Forces: 7 pounds maximum/nominal

Insertion: 7 pounds maximum withdrawal.

Life: 10,000 operations (minimum).

ENVIRONMENTAL

Thermal Range: -55° C to +85° C

Thermal Shock: Meets MIL-STD-202F, method 107D

Salt Spray: Meets MIL-STD-202F, method 101D (for 16 hrs.)

MATERIAL

Shells: Die-cast; satin-nickel plated

Inserts: Glass-filled ther moplastic.

Socket Contacts: Copper alloy, silver-plated.

Pin Contacts: Copper alloy, silver-plated.

Latch Release: Steel, nickel-plated.

TERMINALS

Two ter minations are available on F-Series receptacles:

1. Straight PC-ter minals – direct ter mination to PC-board.

Housing mounts to panel.

2. Right Angle PC ter minals – direct ter mination to

PC-board at right angle. Housing mounts to panel.

Part Terminals Contacts Housing Type

Number

F3MSTF Straight M

F3FSTF F

Silver Satin Nickel

F3MRAF Right Angle M

F3FRAF F

F SERIES RECEPTACLES

F3FRAF

F3MSTF

F3FSTF

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

F SERIES RECEPTACLES

F SERIES RECEPTACLES (continued)

F3MSTF

F3FSTF

F3MRAF

F3FRAF

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

Q-G ADAPTERS, ACCESSORIES

◊Available on special order only; contact

Switchcraft for price and deliver y.

Male and female Q-G ®inserts with 3-7 pins/contacts, fit

appropriate plug and receptacle housings. Female

inserts available with standard latchlock or

FAS-DISCONNECT detent mating, and with solder or

PC terminals. Intended for replacement, or building into

equipment such as microphones and transducers.

Q-G®CONNECTOR INSERTS

SHORTING PLUG

Q-G®ADAPTERS, ACCESSORIES

Insert

Standard FAS-* Male Pins/

Latchlock DISCONNECT Inserts Contacts

—◊QG3FDPC — 3

QG3F QG3FD QG3M 3

QG4F QG4FD QG4M 4

QG5F QG5FD QG5M 5

QG6F QG6FD QG6M 6

QG7F QG7FD QG7M 7

*Suffix letters “PC” indicate PC terminals; all others (except “S”)

have solder lugs.

**Suffix letter “S” indicates locking PC terminal and plastic housing.

◊Special order only. Contact Switchcraft.

3-pin plug shorts out unused hi-Z microphone inputs or other sensitive

circuits (shor ting jumper installed between pins 2 and 3). 6" (152.4 mm)

chain fastened to end pin to prevent plug loss. Switchcraft can install

special wiring for a nominal extra charge.

Part Number Inser t Pins

◊N3MS 3

W(*)M RECEPTACLE

Part Number Inser t Pins

W3M 3

W4M 4

Right-angle male panel receptacle.

Mounts with two, #5-40 machine screws.

Note: Add suffix “BAU” for black insert with gold-plated contacts.

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

G(*)M WALL PLATE RECEPTACLE

H(*)M WALL PLATE RECEPTACLE

J(*)F WALL PLATE RECEPTACLE

K(*)F WALL PLATE RECEPTACLE

Q-G®WALL PLATE RECEPTACLES

Part Insert

Number Finish Pins

◊G3MS Stainless

Steel

◊G4MS 4

Part Insert

Number Finish Pins

◊J3FS Stainless

Steel

◊J4MS 4

Wall plate with one B3M or B4M male

receptacle mounted (in “D”-shaped

hole to prevent turning) on standard

single electrical outlet box. Cover

mounting screws included.

Wall plate with two, B3M

or B4M male receptacles

mounted (in “D”-shaped

holes to prevent turning)

on standard single

electrical outlet box.Cover

mounting screws included.

Wall plate with one, D3F or D4F female

receptacle. Mounts on standard single

electrical outlet box. Cover mounting

screws included.

Wall plate with two, D3F or

D4F female receptacles.

Mounts on standard single

electrical outlet box. Cover

mounting screws included.

Part Insert

Number Finish Pins

◊H3MS Stainless

Steel

◊H4MS 4

Part Insert

Number Finish Pins

K3FS Stainless

Steel

◊K4FS 4

Q-G WALL PLATE RECEPTACLES

◊Special order only. Contact Switchcraft.

◊Special order only. Contact Switchcraft.◊Special order only. Contact Switchcraft.

◊Special order only. Contact Switchcraft.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

Q-G CONNECTOR-ADAPTERS

Switchcraft Q-G ®Connector-Adapters, designed to solve

common interconnection problems, are ideally suited to the

interconnection of microphones, mixers, amplifiers, public

address and sound reinforcement equipment, broadcast

equipment, and any other component that does not have an

appropriate mating connector. All are completely shielded,

and incorporate the high quality and outstanding design f eatures

of the Switchcraft line of Q-G Audio Connectors, including:

1. Separate ground terminal.

2. Ground Contactors.

3. Captive Design®Insert Screw

4. High impact Thermoplastic Insulation.

MATERIAL SPECIFICATIONS

PHONE JACK AND PLUG TERMINATIONS

Shell: Copper alloy, nickel-plated.

Insulation: Paper-base phenolic.

Plug Tip and Sleeve: Copper alloy, nickel-plated.

Phone Pin and Plug Housing: Copper alloy, nickel-plated.

Phono Plug Insulation: Rigid plastic.

Phono Jack Housing: Steel, copper alloy-plated,

tarnish-resistant.

Phono Jack Pin Receptacle: Brass, silver-plated,

copper alloy.

Phono Jack Insulation: Thermoplastic.

321. Phono plug to 3-contact female audio-connector

(Switchcraft®A3F).

322. Phono jack to 3-contact female audio-connector

(Switchcraft®A3F).

323. Phono plug to 3-pin male audio-connector

(Switchcraft A3M).

324. Phono jack to 3-pin male audio-connector

(Switchcraft®A3M).

383A. Three-contact female audio-connector

(Switchcraft®A3F) to standard .250" (6.35 mm)

diameter 3-conductor extension phone jack.

384A. Three-pin male audio connector

(Switchcraft®A3M) to standard .250" (6.35 mm)

diameter 3-conductor extension phone jack.

Q-G®CONNECTOR-ADAPTERS

321

322

323

324

383A

384A

321 322 323 324 383A 384A

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

Male-female connector conversion has male Q-G®insert at one

end and corresponding female Q-G®insert at the other.Designed

to accept internally connected transformer, attenuator, or other

circuitry inline with microphone input. Includes 1.50" (38.1 mm)

long x .594" (15.08 mm) diameter of usable internal volume.

Series 391Q Y-Adapters can combine or split typical audio

signals using a combination of Switchcraft Q-G®A3F and A3M

cord plugs. Outputs of two microphones can conveniently be

connected in parallel and connected to a single input using a

391Q23 Y-Adapter. Cabling is 2-conductor shielded, 2-foot long

gray jacket with molded Y-junction at center point. Mates with

Switchcraft Q-G®and QGP®connectors.

Female Male Insert

Part Number Insert Insert Pins/Contacts

◊S3FM QG3F QG3M 3

◊S4FM QG4F QG4M 4

◊S5FM QG5F QG5M 5

Q-G®Cord Plug Part Numbers

Part Number Plug A Plug B Plug C

◊391Q13 A3F A3M A3M

◊391Q23 A3F A3M A3F

◊391Q33 A3F A3F A3F

◊391Q43 A3M A3F A3F

◊391Q53 A3M A3F A3M

◊391Q63 A3M A3M A3M

Note: “Y” adapters may use either series A(*) or AA(*) plugs.

◊Available on special order only; contact Switchcraft for price and deliver y.

S*FM AUDIO CONNECTOR-ADAPTER AUDIO “Y” ADAPTERS

Q-G®AUDIO CONNECTOR-ADAPTERS

◊Available on special order only; contact Switchcraft for price and deliver y.

386A: Three-contact female audio connector (Switchcraft®A3F)

to standard .250" (6.35 mm) diameter 3-conductor phone plug.

387A: Three-pin male audio connector (Switchcraft®A3M) to

standard .250" (6.35 mm) diameter 3-conductor phone plug.

389: Three-contact female audio connector (Switchcraft®A3F)

at both ends.Pre-wired contacts: 1 to 1, 2 to 2, 3 to 3.

390: Three-pin male audio connector (Switchcraft®A3M)

at both ends.Prewired pins: 1 to 1, 2 to 2, 3 to 3.

386A 387A

389 390

QG AUDIO CONNECTOR ADAPTERS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

DMX ADAPTER

Switchcraft introduces our new series of DMX adapters. The DMX

adapters were developed for use in the theater lighting industry. The

adapters allow the end user to use standard 3 pin XLR cable

assemblies in connecting DMX equipment.The adapters are av ailable

in 3 pin male to 5 pin female and 5 pin male to 3 pin female. All are

wired “straight through.”

FEATURES AND BENEFITS

• Nickel-plated die-cast housing increases durability

• Pre-wired for immediate use

• Available in two configurations

APPLICATIONS

• Theater lighting

• Any DMX application

SPECIFICATIONS

Shell: Die-cast zinc, satin nickel finish

Insert Insulation: Molded thermoplastic

Socket contacts: Silver-plated copper

alloy, tarnish-resistant

Pin contacts: Sliver-plated copper

alloy, tarnish-resistant

ORDERING INFORMATION

S3F5M 3 pin female to 5 pin male

S5F3M 5 pin female to 3 pin male

S3F5M

S5F3M

DMX ADAPTER

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

Hi Z: 2-conductor phone plug,

1⁄4" finger diameter

Part

Number Switchcraft Connector

◊9115 Lo Z: 3-contact Q-G®Hi Z: 2-conductor phone plug,

female, A3F 1/4" finger diameter, right

angle handle, 4" extension

(shielded) cable

◊9129 Lo Z: 3-contact Q-G®Hi Z: 2-conductor phono plug, right

female, A3F angle handle, 4 inch extension

(shielded) cable

9144 Lo Z: 3-contact Q-G®

female, A3F

9244 Lo Z: 3-pin Q-G®

male, A3M

Q-G CONNECTOR-ADAPTER RECEPTACLES

◊Available on special order only; contact Switchcraft for price and deliver y.

Adapter receptacles mount directly to microphones or

similar equipment to provide highly reliable 3-, 4- and 5-pin

Switchcraft Q-G®connections. Adapter shell and coupling nut

are brass, satin nickel finish.

SERIES L(*)MN

Male has plain cylindrical shell with knurled, internally

threaded collar to engage external 13/16-27 threads on

microphone body.

SERIES M(*)M

Male with shell having 13/16-27 external threads to engage

equipment with internally threaded body. Terminals extend out

rear (threaded end) to permit wir ing without disassembly.

Q-G®CONNECTOR-ADAPTER RECEPTACLES

Series 9000 Line Matching Transformers offer low-loss

interconnections between high and low impedance equipment.

Exclusive mu-metal shielding protects against spurious

electrostatic and RF fields.Units are bi-directional and can be

used as follows:

• Low to hi, such as professional low impedance microphones

to high impedance amplifiers. Stereos, cassette recorders,

public address systems, and mixers.

• Hi to low, such as high impedance microphones or electronic

instruments to low impedance amplifiers or mixers.

Designed to mate with Switchcraft Q-G®connectors.

Available with var ious terminations; see char t.

SPECIFYING FEATURES

• Plug-in impedance changes

• Fully wired

• Connections bi-directional (low to high impedance or

high to low impedance)

• Rugged die-cast housings

• Mu-metal shielding

MATERIAL SPECIFICATIONS

Shell: Die-cast zinc shell, nickel-plated with black

non-glare metalized foil label.

Shielding: Mu-metal.

Dimensions: Diameter–.75" (19.05 mm) nominal Length –

3" (76.2 mm) nominal (Par t Number 92XX); 3.375" (85.73 mm)

nominal (Par t Number 91XX).

ELECTRICAL SPECIFICATIONS

Frequency Response: Flat–20 Hz to 20 kHz ± 2 decibels

Impedance: High–50 K ohms (nominal);Low–150 ohms (nominal)

Voltage Step Ratio (Input Power Level); Low to High:

+29 decibels (typical); high to low: -29 decibels (typical)

Z MATCHING TRANSFORMERS

Part Numbers

Series Series Insert

L(*)MN M(*)M Pins

◊L3MN ◊M3M 3

◊L4MN ◊M4M 4

◊L5MN ◊M5M 5

9144

9244

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

Series TA Tini Q-G ®audio adapters have been designed to

adapt Tini Q-G ®connections to standard audio connectors.

Tini Q-G ®adapters convert to Switchcraft Q-G ®and QGP

connectors and similar full-size connectors.

TINI Q-G ®AUDIO ADAPTERS

Tini Q-G ®End Q-G ®End

Part Number Mates With Mates With

◊TA01 TA3F A3M

◊TA02 TA4F A4M

◊TA03 TA5F A5M

◊TA04 TA3F A3F

◊TA05 TA4F A4F

◊TA06 TA5F A5F

TINI Q-G MINIATURE CONNECTORS

TINI Q-G®MINIATURE CONNECTORS

DESIGN FEATURES

STYLE – Streamlined, miniaturized with nickel-plated metal

and contrasting black plastic parts. Designed for light weight

and unobtrusiveness. Also available in conductive black

chrome finish.

CONSTRUCTION – Metal parts are rugged die-cast or

precision machined with nickel-plating; plastic par ts are molded

of high dimensional-stability thermoplastic. Advanced design

assures minimum weight consistent with strength and

durability of cord plug housings of .413" (10.5 mm) diameter

Weight: Series TA(*)F plug = .25 ounce (7 g); Series TA(*)M =

.3 ounce (8.5 g).

INSERTS – Precision molded of thermoplastic for high

mechanical and dielectric strength. Contacts and terminals

are precision formed and plated for intimate contact and low

resistance connections.Terminal numbers are molded on rear

of male insert and on face of female insert for easy

identification (e xcept 6-pin male insert).Inserts can be supplied

for OEM installation in microphones and instrumentation for

optimum connecting reliability.For cord plugs , inserts can also

be supplied for replacements.

LATCHLOCK – Positive latch system assures high integrity,

vibration-resistant mating and transfer of shielding connection

between housing, combined with simple, easy fingertip release.

STRAIN RELIEF – Rugged internal clamp holds cable tightly,

while making a secure, low resistance connection between

cable shield and housing.

FLEX RELIEF – Protects by minimizing cable bending stress

at point of cable entry. Maximum recommended cable diameter

is .115" (2.92 mm) when flex relief is used. By omitting

fle x relief (Series T(*)FL and T(*)ML only), cab le up to .170"

(4.32 mm) diameter can be used.

ASSEMBLY – Connector parts are mechanically keye d for

simple assembly.

POLARIZATION – Mating male and female connectors are

also mechanically ke y ed (latch and g roo v e) so that it is impossib le

to mate them incorrectly.

“SCOOP-PROOF” FEATURE – Fully recessed pins on male

plugs and receptacles cannot be “scooped”, bent or damaged

by accidental mismating with mating connector.

COLOR ESCUTCHEONS – Attractive color escutcheons,

Series TYEF, are recommended for use with Series TY(*)F and

TY(*)FPC receptacles (when rear mounted) for attractive panel

trim, as well as color coding one or more connectors. Colors

are: red, black, gray, green, blue, white and yellow.

CUSTOM Tini Q-G®CABLE ASSEMBLIES – On special

order where production quantities warrant, Switchcraft can

supply assembled and tested Tini Q-G®cables.

MOUNTING

Panel/Chassis Thickness:

Series TB(*)M: .25" (6.35 mm) maximum

Series TY(*)F:

Front—.375" (9.5 mm) maximum

Rear—.093" (2.3 mm) maximum

Series TY(*)FPC:

Front—.312" (7.9 mm) maximum

Rear—.093" (2.3 mm) maximum

Series T A(*)F,T A(*)FB,T A(*)FL and T A(*)FLB –

Straight female cord plug

Series T A(*)M,T A(*)MB,T A(*)ML and T A(*)MLB –

Straight male cord plug

Series TB(*)M and TB(*)MB – Chassis/panel mount

male receptacle

Series TY(*)F and TY(*)FPC – Chassis/panel, female

receptacle, choice of solder lugs or P.C. ter minations.

Series TLP –Looping Plugs

Series TBA(* *) –Audio Adapters

Series TRA(*)M –PC Mount Male Receptacles

Series TRG(*) –Reverse Gender Panel Mount, Cord Mount

TA3M

TA3F

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

Part Insert Part Insert

Number Pins Number Pins

TA3M 3◊TA5M 5

TA3MB* 3◊TA5ML 5

TA3ML 3TA5MLB* 5

TA4M 4TA6ML16

TA4MB* 4TA7ML 7

TA4ML14TA8ML 7

STRAIGHT MALE CORD PLUG

Part Insert Part Insert

Number Contacts Number Contacts2

TA3F 3TA4FLB*4

TA3FB* 3TA5F 5

TA3FL13TA5FL15

TA3FLB* 3TA5FLB* 5

TA4F 4TA6FL16

TA4FB* 4TA7FL 7

TA4FL14TA8FL 8

STRAIGHT FEMALE CORD PLUG

1 Flex relief omitted for larger diameter cable

2. Add AU to Part Number for Gold Contacts.

* B indicates black housing

1. Add AU to Part Number for Gold Contacts.

* B indicates black housing

TINI Q-G MINIATURE CONNECTORS

SPECIFICATIONS: (3 – 5 CORD MOUNT ONLY)

ELECTRICAL

Contact Resistance: .010 ohms maximum after life

(and after salt spray).

Current Rating (Carry Only): 5 A, 125 V AC (4 A, 125 V AC

on 5 circuit) based on 30°C maximum.

Insulation Resistance: 510,000 megohms minimum @ 500 V

DC (initial); 10,000 megohms minimum (after humidity test).

Dielectric Strength: 1,000 V (rms).

MECHANICAL

Life: 5,000 operations minimum

Insertion/Withdrawal Forces (after life): 6.1 lb ./2.77 kg after

life, inser tion; 5.6 lb/2.54 kg, withdrawal.

Solderability Standard: Meets EIA RS-186-9E.

Mechanical Shock: Meets MIL-STD-202, method 213B.

Vibration: Meets MIL-STD-202, method 201A.

Wire Size: #22 wire gauge solid; #24 wire gauge stranded.

ENVIRONMENTAL

Thermal Range: -55°C to + 85°C.

Humidity: Meets MIL-STD-202, method 106D.

Thermal Shock: Meets MIL-STD-202, method 107D.

Salt Spray: Meets MlL-STD-202, method 101.

MATERIAL

Housing, Plugs and Male Receptacles: Copper alloy,

nickel-plated. Female Receptacle–Die-cast zinc, nickel-plated.

Black Tini Q-G®Housing: Copper alloy, black chrome-plated.

Pin and Socket Contacts: Copper alloy, silver-plated.

Flex Relief: Molded black ther moplastic elastomer.

Latch Button: Molded black ther moplastic.

Release Lever and Mounting Washer: Steel, nickel-plated.

Standoff/Ground Terminal and Cable Clamp:

Steel, electrotinned.

Inserts and Insulating Spacer: Molded, high strength

thermoplastic.

Latch (Female): Copper alloy, nickel-plated.

Mounting Nut: Copper alloy, nickel-plated.

SPECIFICATIONS:

(6 – 8 Cord Mount and all Receptacles and Adapters)

ELECTRICAL

Contact Resistance: .010 ohm maximum after life.

Current Rating (Carry only): 1.5A, 125 VAC, based

on 30° maximum

Insulation Resistance: 510,000 MΩminimum

@ 500 VDC (initial).

Dielectric Strength: 250 V rms.

MECHANICAL

Life: 2,000 operations

Insertion/Withdrawal Forces (after life): –13 pound

inser tion; –13 pound maximum withdrawal

Solderability Standard: Meets EIA RS-186-9E.

Wire Size: 28 wire gauge stranded.

MATERIAL

Housings, Plugs and Male Receptacles: Copper alloy,

nickel-plated.

Socket Contacts: Copper alloy, silver-plated.

Pin Contacts: Copper alloy, electrotinned.

Flex Relief and Latch Button: Molded thermoplastic.

Ground T erminal: Copper alloy, electrotinned.

Inserts and Insulating Spacer: Molded high strength

thermoplastic, UL 94 V-0.

Latch (Female): Copper alloy, nickel-plated.

Mounting Nut: Copper alloy, nickel-plated.

Ferrite: 43 material, shielded head.

Frame: Molded thermoplastic, UL 94 V-0.

TINI Q-G®MINIATURE CONNECTORS (continued)

◊Available on special order only; contact Switchcraft for price and deliver y.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TINI Q-G MINIATURE CONNECTORS

Male receptacle for

chassis/panel mounting.

Specially designed

flange permits close

(front) mount on crowded

panels. Mounting

hardware supplied.

Available with PC

terminals. Call factory

for details.

TB(*)M AND TB(*)MB RECEPTACLE

Looping plug is designed for

circuit testing. Other inserts

and wiring patterns are

possible;contact Switchcraft.

STRAIGHT FEMALE LOOPING PLUG

Part Number Inser t Contacts

◊TLP4 4

◊TLP6 6

Part Insert Description

Number Pins

TRGS4F 4Panel mount female

TRG4M 4Cord mount male w/latch

Part Insert Part Insert

Number Pins Number Pins

TB3M 3TB5MB* 5

TB3MB* 3TB6M 6

TB4M 4TB7M 7

TB4MB* 4TB8M 8

TB5M 5

* B indicates black housing ◊Available on special order only; contact Switchcraft for price and deliver y.

* Number of inser t contacts or pins must be specified to complete Par t Number.

TINI Q-G®MINIATURE CONNECTORS (continued)

TLP(*) LOOPING PLUG

TRG4M TRGS4F

REVERSE GENDER TQG SERIES

Same specifications as the original

TQG Series, however, the latch is on

the male cord mount. Available in 4

pin only.

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TINI Q-G MINIATURE CONNECTORS

TINI Q-G®MINIATURE CONNECTORS (continued)

Part Number Insert Pins

TRA3M 3

TRA6M 6

TRA6MF* 6

TRA(*)M PC MOUNT MALE RECEPTACLE

The TRA(*)M low profile male receptacles mount in

minimum space from the rear of panel or chassis, and

feature space-saving right-angle construction and PC type

terminals. The TRA3M is a cost-effective choice for audio

equipment, medical instrumentation, computer equipment and

test/measurement applications. Also available with 6 pins.

*F designates ferrite shielding.

TRA6M

TRA3M

TRASM*M,TRAPC*M SERIES

Switchcraft introduces an e xpansion of its popular TQG Series of

connectors.The TRASM*M and TRAPC*M offers low profile, right

angle PC board mount connectors.The TRASM*M versions are

true surface mount connectors , while the TRAPC*M v ersions are

through-hole PC mount connectors. Both versions are available

in 3-8 pins.All plastic connectors, the TRASM*M and TRAPC*M

series hav e flats on the top of the connectors to facilitate pic k and

place assembly. As an added option, a non-threaded bushing

version is also available.

FEATURES AND BENEFITS

• Low profile, compact design reduces PC board space

• Mates with TQG female cord plugs

• Rated at 5A for 3-6 pins, 3A for 7 and 8 pin versions

MARKETS

• Wireless microphone systems

• Medical Instrumentation

• Test Instrumentation

SPECIFICATIONS

MATERIALS

Housing: Thermoplastic

Contacts: Brass, tin-plated

Nut and Washer: Brass, nickel-plated

ELECTRICAL

Current Rating: 5A for 3-5 pins, 1.5A for 6-8

Contact Resistance: 10 m Ohm max

Insulation Resistance: 100 m Ohm min

Dielectric Withstanding Voltage: 250VAC

Mechanical Life: 2,000 cycles

TRASM3M TRAPC3MS

See next pages for drawings

TINI Q-G®CONNECTORS ORDERING INFORMATION

___ ___ ___ ___ ___ ___ ___ ___ ___

Reel Size

15" reel, standard tape

and reel size

Optional Packaging

TR - Tape and Reel

(std packaging - bulk)

Optional Modifier

1 - no thread

Optional Modifier

S-small Profile (available

in configurations 3&4 only)

TRA M

Tini QG

Right Angle

Termination

PC - Thru Hole

SM - Surface Mount

Contacts Configuration

3 - 8

Contact Gender

M - Male

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TWIN Q-G MINIATURE CONNECTORS

TINI Q-G ®MINIATURE CONNECTORS (continued)

TRASM*M,TRAPC*M SERIES

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TINI Q-G MINIATURE CONNECTORS

TINI Q-G ®MINIATURE CONNECTORS (continued)

TRASM*M,TRAPC*M SERIES

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

◊Available on special order only; contact Switchcraft for price and deliver y.

TINI Q-G ®MINIATURE CONNECTORS (continued)

Female receptacle mounts in minimum

space from front or rear panel or chassis.

Terminals are solder lugs, Series

TY(*)F, or P.C., Series TY(*)FPC. All

receptacles have separate ground lug.

Trim escutcheons in seven colors for

use with Series TY(*)F and TY(*)FPC

receptacles, are recommended for rear

mount receptacles. Escutcheons must

be ordered separately.

TY(*)F AND TY(*)FPC RECEPTACLES MOUNTING HOLE DETAIL

SERIES TY(*)F,TY(*)FPC

RECOMMENDED P.C. BOARD LAYOUT

TYEF ESCUTCHEONS

COMBINED P.C./PANEL

MOUNTING

Part Insert Part Insert

Number Contacts Number Contacts

TY3F 3TY5F 5

TY3FPC 3TY5FPC 5

TY4F 4

TY4FPC 4

Part Number Color

◊TYEF01 Red

◊TYEF02 Black

◊TYEF03 Green

◊TYEF04 Blue

◊TYEF05 White

◊TYEF08 Yellow

◊TYEF11 Gray

Male and female inser ts with 3, 4, 5

or 6 pins/ contacts. For replacement

(cord plugs only) or build-into

equipment, such as microphones,

transducers and instruments.

TQG(*)F AND TQG(*)M

CONNECTOR INSERTS

3–6 pin male-to-male adapter is designed

for through-bulkhead or cable expansion

usage. Adapter is prewired pin 1 to pin 1,

pin 2 to pin 2, etc. Mounting nuts are

supplied for each threaded end. Panel

hole diameter required is .45"; maximum

panel thickness is .25" (6.35 mm).

TBA(**) AUDIO ADAPTER

Part Number Insert Pins

◊TBA03 3

◊TBA04 4

◊TBA05 5

◊TBA06 6

Part Number Insert Contacts

◊TQG3F 3

◊TQG4F 4

◊TQG5F 5

◊TQG6F 6

Part Number Insert Pins

◊TQG3M 3

◊TQG4M 4

◊TQG5M 5

◊TQG6M 6

Female Inserts

Male Inserts

REAR

MOUNTING FRONT

MOUNTING

TINI Q-G MINIATURE CONNECTORS

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

HPC SERIES

Switchcraft recently introduced a complete line of panel mount

speaker connectors that are completely compatible with the

Neutrik®Speakon®4 pole series. We are now introducing a

complete line of cable mounts as well. The complete HPC

Series offers both panel mount and cord mount connectors.

The HPC panel mounts have been updated with new

silver-plated contact materials that boost the contact ratings to

30A per UL 1977 on PC mount versions, 50A per UL 1977 on

Faston®versions. They are still available with either 0.100"

depth flanges or 0.200" depth flanges.The 0.200" depth flange

allows for rear mounting of the HPC Series, and proper mating

of all cord plugs. The panel mount versions are available with

either 0.187" or 0.250" Faston®terminals, and either straight or

right angle PC mount terminals. The right angle PC mount

version also has, as an option, a mounting post which allows

the connector to snap onto the PC board for wave soldering.

The HPC cord plugs are available in either straight, right

angle, or as an in-line.The in-line version mates with either the

straight or right angle cord plug, allowing the end user to e xtend

cable runs. All cord plugs are compatible with Speakon®panel

mounts.The in-line mates with our HPC cord plugs, as well as

Speakon®cord plugs. The unique feature of the HPC series

cord plugs are the “push to lock” feature, similar to the

connection of an XLR connector. The HPC cord plugs, when

mated to either HPC panel mounts or Speakon®panel mounts

do not require a 1/4" turn to engage. Simply push the connector

in until it locks. To disengage, push forward on the latch lever

and pull the connector out.This feature eliminates the need to

remember to turn the connector to make contact. All HPC cord

plugs utilize 0.250" Faston®terminals, which allow for easy

assembly, and make it easy to change cord plugs. To change

from a straight cord plug to an in-line cord plug, back off the

strain relief nut, twist off the handle, disconnect the Faston®

terminals, fasten the new cord connector, twist on the handle

and the strain relief. Barbs on the handle keep the handle from

vibrating loose from the front shell.

Both HPC panel mounts and cord plugs incor porate a built-in

gasket, which allows them to meet IP 25 harsh environment

ratings, as well as IEC 529 and IEC 1010-1 safety ratings.

FEATURES AND BENEFITS

• Completely compatible with Neutrik®Speakon®

4 pole connectors

• 30A rating per UL 1977 on PC mount versions

• 50A rating per UL 1977 on Faston®versions

• Panel mounts have two different Faston®terminal sizes,

0.187" and 0.250"

• Panel mounts offered with two different flange depths,

0.100" and 0.200"

• 0.200" depth flange offers easy rear mounting

• Right angle or straight PC board terminals on panel mounts

• Built in gasket gives all HPC connectors IP 25

environmental ratings

• All HPC Series meet IEC 529 and IEC 1010-1 safety ratings

• Cord plug versions offer “push to lock” design,

no 1/4" turn to engage

• Cord plug versions accept 10 AWG wire,

0.560" cable OD max

APPLICATIONS

• Loudspeakers

• Power audio amplifiers

SPECIFICATIONS

Materials

Housings:Ther moplastic UL 94V-O rated

Seal Rings:Ther moplastic r ubber

Contacts: Silver-plated over copper alloy

ELECTRICAL

PC Terminals Current Rating: 30A per UL 1977

Faston®Terminals Current Rating: 50A RMS w/10AWG

wire, normal ambient, per UL 1977

Voltage Rating: 1,500 AC RMS, Per Mil-Std 202 Method 301

Insulation Resistance: > 2T Ohms

Contact Resistance: 1m Ohm, 1.5mOhm after 1,000

insertion/withdrawals

MECHANICAL

Shock: Mil-Std 202, Method 213B Cond.K

Vibration: Mil-Std 202, Method 201A

Life: 1,000 inser tion/withdrawals

Cable Range: 0.560” OD max

ENVIRONMENTAL

Salt Spray: Mil-Std 202, Method 101D Cond. B

Thermal Shock: Mil-Std 202, Method 107G

Temperature Limits: -55 C to +85 C

Moisture Resistance: Mil-Std 202, Method 106E

Life@Ambient T emperature: Mil-Std 202, Method 108A

Touch Proof: IEC 65 and 1010-1

Weather Tightness: IEC 529, IP 25

CORD MOUNT ORDERING INFORMATION

Part Number Description

HPCC4F Straight Cord Plug

HPCI4F Inline Cord Plug

HPCC4RAF Right Angle Cord Plug

HPC SERIES PANEL MOUNTS AND CORD PLUGS

HPCPR41F HPCP41F HPCP410RA HPCI4F HPCC4F HPCC4RAF

HIGH POWER CONNECTORS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

PANEL MOUNT ORDERING INFORMATION

___ ___ ___ ___ ___ ___ ___

Series

High Power Connector

Type of Connector

P - Panel

Type of Housing

Blank - rectangle

R - round

Number of Contacts

Termination

F - .250" Faston®; F1 - .187" Faston®; PC - Printed Circuit

RA - Right angle PC; RAP - Right angle PC with mounting post

Mounting Holes

Blank - Rectangle: .140” dia. w/Countersink Hole

Blank - Round: .152” dia. w/Countersink Hole

0 - Rec./ Round: .093” Dia. Hole

Recessed Flange (Dim. “A”)

1 - .100”; 2 - .200”

HPC P 4

HIGH POWER CONNECTORS

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

HPCP*4

HIGH POWER CONNECTORS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

GENERAL FEATURES AND BENEFITS

• Great all-purpose connector “weather” or not sealing feature is required.

• Superior leakage protection. Contact area is double-sealed for

excellent moisture and chemical resistance when mated to

Switchcraft’s connectors.

• Integral O-ring and gasket. O-ring is molded onto cord housing

assembly and gasket is molded onto panel housing assembly

to prevent leakage and eliminate need for additional O-rings

and gaskets.

• Reduced par t count for reduced labor to assemble.

• No Grommets. Cable clamp assembly features living hinges,

which snap easily onto and suppor t the cable.

• Thermoplastic r ubber body simulates closed entry contact

system to prevent probe damage or accidental loss of

spring retention due to misaligned or bent pins.

• Abrasion-resistant thermoplastic boot provides strain relief

and accepts cable diameter .195" to .265".

• Housing rated UL 94V-O against flammability.

• Panel connector shell features a positioning keyway to prevent

misalignments and a polarizing single “D” design for proper panel

mounting and to prevent rotational movement.

• 2-18 pins.

• Exceeds Coast Guard specifications for water tightness

(CFR 46 Par t 110.20).

• Optional cap covers panel housing assembly when not in use.

• Exceeds enclosure rating IP16/IP18 when not mated or

covered and IP66/IP68 when mated or covered (IEC 529).

• Exceeds enclosure rating 6P at 1000V when mated or co v ered (NEMA 250).

MATING INSTRUCTIONS FOR A CORD CONNECTOR TO A

PANEL MOUNT OR IN-LINE CONNECTOR

First, align the notched keyway on both the panel mount or in-line and

cord connector.Then, push the cord connector onto the mating connector .

Grasp the coupling ring between the slots, push it toward the panel

mount connector and rotate it clockwise nearly one half a turn.Continue

rotating until you f eel the coupling ring ride ov er the loc king “b ump”.This

is the lock ed position.The cord connector is not securely in place unless

this procedure is followed.

APPLICATIONS

Process Control Communications

Marine Electronics Transportation

Medical Instrumentation General Industrial Electronics

Geothermal Instr umentation Harsh Environments

MATERIALS

Cord and panel connector shells, contact locking disk,

and cable clamp assembly: Thermoplastic polymer glass

fiber, flame retardant

Coupling ring: Nylon

Rear boot and connector shell interior: Thermoplastic r ubber

Contacts: Copper base alloy gold-plated over nickel underplate

SPECIFICATIONS

MECHANICAL

Shock: Mil-Std 202 Method 213B, condition K

Vibration: Mil-Std 202 Method 201

Life: 600 inser tion/withdrawal cycles (minimum)

ELECTRICAL

Voltage Rating (sea level): Tested at 600 VRMS

Insulation Resistance: 100 megohms (minimum) at 77° F

Contact Resistance: 5 milliohms (maximum)

Current Rating: 3.0 Amps (#26 contact)– 9 through 18pin

6.5 Amps (#20 contact)– 7 and 8 pin

7.5 Amps (#20 contact)– 2 through 6 pin

13.0 Amps (#16 contact)– 2 and 3 pin

7101213 15

50.00

40.00

30.00

20.00

10.00

0.00

EN3™Weathertight Connector Current Carry Capability

(per UL 498 Standard)

Current (Amps) - w/14 AWG Wire

Temp Rise (Centigrade)

▲

■

◆

◆◆◆

◆

✖

▲

Female 3 pin

Male 3 pin

Female 8 pin

Male 8 pin

◆

■

▲

✖

Contact size/

number of contacts

#20-2

#20-4

#20-3

#16-2

#20-7, #20-8

#20-5, #20-6

#16-3

2000

1000

3000

Voltage

Dielectric Withstanding Voltage

ENVIRONMENTAL

Temperature Limits: -40°C to +65°C (non-operating)

Moisture Resistance: Mil-Std 202 Method 106F

Insulation Resistance: Mil-Std 202 Method 302

condition B

Thermal Shock: Mil-Std 202 Method 107G

Salt Spray: Mil-Std 202 Method 101D condition B

RATINGS

IP16/IP18 CFR 46 Par t 110.20

IP66/IP68 UL 94V-O

NEMA 250 (6P)

Patent 5,485,673 File 36049

Cord

Connector

Panel

Connector

EN3 MINI WEATHERTIGHT CONNECTOR SERIES

™

EN3

™

MINI WEATHERTIGHT CONNECTOR SERIES

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

CORD CONNECTOR ASSEMBLY INSTRUCTIONS

CABLE BOOT COUPLING

RING

CABLE CLAMP

HOUSING CONTACT PINS O-RING

(MOLDED ONTO

CORD CONNECTOR)

3/8"

MAX.

7/32"

9/32"

NOTCH (PIN #1

INDICATOR)

SOLDER

CORD CONNECTOR IN-LINE CONNECTOR

CORD

CONNECTOR

IN-LINE

CONNECTOR

Cord Connector: To assemble the three-part cord connector, first feed the end of the cable through the boot, cable clamp

housing, and coupling ring in that order and position as shown in the figure below. NOTE: The coupling ring can also be

inserted onto the cord connector from the front. In-line Connector: Feed the end of the cable through the boot and cable

clamp housing in the order and position shown.

Next, str ip the cable .218" as shown and begin solder ing conductors to pins, or insert contacts cr imped on wire star ting

with contact #1 next to the "notch" and following with the remaining conductors counter-clockwise with #6 or #8 conductor

in the center.

Push the cable clamp housing forward until it locks

into the connector body and snap the two clamps

into their compar tments.

Finally, push the boot all the way forward to seat tightly

onto the cable clamp housing.

Remember: Cord connectors will not mate with each other. For cord-to-cord connection,

your customer must order a cord connector plus an in-line connector.

CABLE

CONTACT PINS

3/8"

MAX.

7/32" 9/32"

SOLDER

CABLE CLAMPS

CABLE CLAMP

HOUSING

IN-LINE

CONNECTOR

NOTCH (PIN #1

INDICATOR)

CRIMP CONTACT

INSERTION INSTRUCTIONS

CRIMP CONTACT

EXTRACTION INSTRUCTIONS

STEP 4

STEP 3

STEP 2

STEP 1

BOOT

CORD

CONNECTOR

Note: Solder and PC contacts are factor y assembled

CRIMP TOOLS

Part Number

EN3INS16

EN3INS20

EN3CR

EN3CRAUTO

EN3POS16

EN3POS20

Tool Description

Inser tion/Extraction Tool for 16 AWG

Inser tion/Extraction Tool for 20 AWG

Crimp Hand Tool

Pneumatic Crimp Tool

Positioner for 16 AWG contacts and pins

Positioner for 20 AWG contacts and pins

NOTE: A positioner must be used with the

EN3CR and EN3CRAUTO.

CABLE CLAMPS

EN3 MINI WEATHERTIGHT CONNECTOR SERIES

™

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

EN3 MINI WEATHERTIGHT CONNECTOR SERIES

™

EN3

™

MINI WEATHERTIGHT CONNECTOR SERIES (continued)

2 – 8 PIN CORD CONNECTOR

9 – 18 PIN CORD CONNECTOR

EN3 Cord Connector Part Number Scheme

Notes: 7 & 8 pin not available in cord male

9-18 pin available in either staggered solder or straight solder only

9-18 pin available only with # 26 terminals

AG: Silver plating special order

#16 contact available in 2 & 3 pins only

Series Style Pins/ Gender Contact Contact Contact Packaging

Contacts Size Style Plating

EN3 C 2-18 F: Female 16: #16 C: Crimp AG: Silver K: Kit

M: Male Leave blank P: PC Leave blank Leave blank

for #20 S: Staggered for gold for bulk

26: for 9-18 Leave blank packaging

only for solder

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

EN3 MINI WEATHERTIGHT CONNECTOR SERIES

™

2 – 8 PIN PANEL CONNECTOR

9 – 18 PIN PANEL CONNECTOR

EN3

™

MINI WEATHERTIGHT CONNECTOR SERIES (continued)

EN3 Panel Connector Part Number Scheme

Series Style Pins/ Gender Contact Contact Contact Packaging

Contacts Size Style Plating

EN3 P 2-18 F: Female 16: #16 C: Crimp AG: Silver K: Kit

M: Male Leave blank P: PC Leave blank Leave blank

for #20 S: Staggered for gold for bulk

26: for 9-18 Leave blank packaging

only for solder

Notes: 7 & 8 pin not available in panel female

9-18 pin available in either staggered solder or straight solder only

9-18 pin available only with # 26 terminals

AG:Silver plating special order

#16 contact available in 2 & 3 pins only

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

EN3 MINI WEATHERTIGHT CONNECTOR SERIES

™

EN3

™

MINI WEATHERTIGHT CONNECTOR SERIES (continued)

2 – 8 PIN INLINE CONNECTOR

2 – 8 PIN OVERMOLDED CORD AND INLINE CONNECTOR

(See Cable Section for More Details.)

Notes: 7 & 8 pin not available in inline female

#16 contact available in 2 & 3 pins only

AG: Silver plating special order

Series Style Pins/ Gender Contact Contact Contact Packaging

Contacts Size Style Plating

EN3 I 2-8 F: Female 16: #16 C: Crimp AG: Silver K: Kit

M: Male Leave blank P: PC Leave blank Leave blank

for #20 Leave blank for gold for bulk

for solder packaging

EN3 Inline Connector Par t Number Scheme

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

DIN CONNECTORS AND PLUGS

SPECIFICATIONS

ELECTRICAL

Contact Resistance: Cord Plugs and Receptacles;

.010 ohms, contact spring/pin .030 ohms, ground clip/shell.

Control and Switching Receptacles; .015 ohms, contact

spring/pin; .020 ohms, switch contacts.

Dielectric Withstanding Voltage: 500 V (rms)

Contact Rating: 5-pin; 3A, 34 V DC

Leakage Resistance: 105MΩ

Recommended Wire Size: 22 wire gauge maximum

MECHANICAL

INSERTION/WITHDRAWAL FORCES:

MATERIAL

Shell: Die-cast zinc alloy, nickel-plated.

Receptacle Mounting Flange: Steel.

Receptacle Body: Plastic.

Insert Material: Plastic.

Socket Contacts: Tin-plated.

Pin Contacts: Tin-plated.

Switching Contacts: Silver-plated.

Cable Relief Bushing: Soft plastic.

DIN CONNECTORS

DIN PLUGS

STRAIGHT

CORD PLUG

with 30° lock ring

STRAIGHT

CORD PLUG

with Shielded Barrel

Type 05CL5M – typical Male plug with ground key-rib.

Unique 30° turn lockring securely fastens two halves of

connector. Mates with lock flange female connectors and

receptacles. Insert screw holds insert assembly in shell and

also retains lockring on shell. Flexible black strain relief with

7/32" diameter cable entry. Heavy duty clamp.

Type 15GM7M – typical: Male cord plug with shielded barrel

and insulated snaplock plastic body. Two piece metal barrel

surrounds pin insert to form an electrical shield. The entire

insert assembly is held together by snapping the insulated

plastic shell over the assembly.The barrel’s special metal tab

locks the shell in place. Standard color of plastic shell is gray.

All-pur pose cable clamp.

PIN ARRANGEMENTS

CONTACT ARRANGEMENTS

Part Number Description Pin Arrangement

◊05CL3M 3 pins at 180° 2

05CL5M 5 pins at 180° 5

◊09CL4M 4 pins at 210° 3

◊12CL5M 5 pins at 240° 4

◊15CL7M 7 pins at 270° 7

◊15CL8M 8 pins at 270° 9

Part Number Description Arrangement

◊05GM3M 3 pins at 180° 2

Gray body and strain relief.

05GM5M 5 pins at 180° 5

Gray body and strain relief

◊09GM4M 4 pins at 210° 3

Gray body and strain relief

◊12GM5M 5 pins at 240° 4

Gray body and strain relief

◊12GM6M 6 pins at 240° 6

Gray body and strain relief

◊15GM7M 7 pins at 270° 7

Gray body and strain relief

◊15GM8M 8 pins at 270° 9

Gray body and strain relief

◊20GM8M 8 pins at 262° 10

Gray body and strain relief

SPECIFYING NOTE: Use letter “JL” in place of “GM” to order same part number

with black housing.

◊Available on special order only; contact Switchcraft for price and deliver y.

ORDERING INFORMATION

Number of Insertion Force Withdrawal Force

Contacts pound/N pound/N

23.6/(16) .45- 2.7/(2-12)

35.4/(24) .67- 4.1/(3-18)

47.2/(32) .90- 5.4/(4-24)

59.0/(40) 1.24- 6.8/(5.5-30)

610.8/(48) 1.46- 8.1/(6.5-36)

712.6/(56) 1.68- 9.5/(7.5-42)

814.4/(64) 1.90-10.8/(8.5-48)

NOTE: All connectors meet DIN specifications #41524. Din specification

numbers (except for 4-pin, 5-pin @ 240°, and 8-pin @ 262°)

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

DIN PLUGS AND RECEPTACLES

TYPE 12BL6M – TYPICAL

Male plug with ground key-rib. Nickel-plated diecast handle.

Contact friction coupling. Flexible black strain relief. Heavy

duty cable clamp.

STRAIGHT CORD PLUG with Extended Barrel

RIGHT-ANGLE CORD PLUG

with 8 Position Barrel

RIGHT-ANGLE CORD PLUG

with 8 Position Barrel and 30°

Lockring

DIN PLUGS AND RECEPTACLES

TYPE 05DL5M – TYPICAL

Right-angle chassis hugging, male plug with flexible black

rubber strain relief. Unique 8-position barrel offers a choice of

eight different cable entry angles.

TYPE 05YL5M – TYPICAL

Right-angle chassis hugging, male plug with flexible strain

relief. Unique 8-position barrel gives you a choice of any one

of eight different cable entry angles. ground key rib 30° turn

lockring securely fastens two halves of connector.

Part Number Description Pin Arrangement

◊03BL2M 2 pins with insulated 1

switch actuator

◊05BL3M 3 pins at 180° 2

◊05BL5M 5 pins at 180° 5

◊09BL4M 4 pins at 210° 3

12BL5M 5 pins at 240° 4

◊12BL6M 6 pins at 240° 6

◊15BL7M 7 pins at 270° 7

◊15BL8M 8 pins at 270° 8

Part Number Description Pin Arrangement

◊05YL3M 3 pins at 180° 2

◊05YL5M 5 pins at 180° 5

◊09YL4M 4 pins at 210° 3

◊12YL5M 5 pins at 240° 4

Part Number Description Pin Arrangement

◊05DL3M 3 pins at 180° 2

◊05DL5M 5 pins at 180° 5

◊09DL4M 4 pins at 210° 3

◊12DL5M 5 pins at 240° 4

◊12DL6M 6 pins at 240° 6

◊15DL7M 7 pins at 270° 7

◊Available on special order only; contact Switchcraft for price and deliver y.

05DL5M shown

ORDERING INFORMATION ORDERING INFORMATION

ORDERING INFORMATION

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TYPE 06AL5F – TYPICAL

Female plug with ground contact. Diecast metal shell,

nickel-plated.Two contact plug, Part number 04AL2F includes

a break circuit switch (1-B) which is opened by engaging the

insulated switch actuator of the mating plug or receptacle.

Flexible black strain relief.

STRAIGHT CORD PLUG with Flush Socket Insert STRAIGHT CORD PLUG with Lock Flange

DIN PLUGS AND RECEPTACLES (continued)

TYPE 06EL5F – TYPICAL

Female plug with ground contact. Lock flange designed to

accept 30° lockring.Insert screw firmly holds insert assembly in

shell. Fle xible black strain relief with 7/32" diameter cable entry.

Heavy duty cable clamp.

Part Number Description Contact Arrangement

◊06AL5F 5 contacts at 180° F

◊13AL5F 5 contacts at 240° E

◊13AL6F 6 contacts at 240° G

◊15AL7F 7 contacts at 270° H

◊15AL8F 8 contacts at 270° N

Part Number Description Contact Arrangement

◊◊06EL5F 5 contacts at 180° F

13EL5F 5 contacts at 240° E

◊15EL8F 8 contacts at 270° N

RECEPTACLE with Extended Shell

TYPE 57KD3M – TYPICAL

Male receptacle, 3 pins, with ground key-rib. Diecast

extended shell and flange for chassis or panel mounting.

Turret terminals.

Part Number Description Pin Arrangement

57KD3M 3 pins at 180° 2

◊Available on special order only; contact Switchcraft for price and deliver y.

ORDERING INFORMATION ORDERING INFORMATION

ORDERING INFORMATION

Stain Relief

.216

5.5 .216

5.5

2.24

57.0

.456

11.6 .622

15.8

1.22

31.0

0.51

1.3

.393

10.0

DIN PLUGS AND RECEPTACLES

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

DIN RECEPTACLES

TYPE 59GB3F – TYPICAL

Unique 3 and 5 contact receptacles include a 1-B (closed

circuit) switch which is mounted to drawn metal shell. Switch

is actuated by the shell of the mating plug. Receptacles also

provide complete shielding through the ground contact.

Flared solder terminals.

RECEPTACLE with Closed Circuit Switch RECEPTACLE for Chassis or Panel Mounting

For shielded and extended barrel plugs

DIN RECEPTACLES (continued)

Part Number Description Contact Arrangement

◊59GB3F 3 contacts at 180° plus B

closed-circuit switch

(Schematic #5)

TYPE 57GB5F – TYPICAL – FLARED SOLDER

TERMINALS

Drawn metal recessed shell with mounting flange and ground

contact. Available flared solder terminals. Part Number

58GB3F features two extra blanks in insert for proper mating

(5 pins at 180°) plug where applications may require greater

connector flexibility. Flared solder terminals standard.

Part Number Descriptions Contact Arrangement

◊57GB3F 3 contacts at 180° B

◊57GB5F 5 contacts at 180° F

◊60GB4F 4 contacts at 210° D

◊61GB5F 5 contacts at 240° E

◊61GB6F 6 contacts at 240° G

◊62GB7F 7 contacts at 270° H

◊62GB8F 8 contacts at 270° N

◊Available on special order only; contact Switchcraft for price and deliver y.

ORDERING INFORMATION ORDERING INFORMATION

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

DIN RECEPTACLES

RECEPTACLE for Lockring Plug

Flared solder terminals on

Part Number 57HB5F

RECEPTACLE

for Printed Circuit Board

Mounting

DIN RECEPTACLES (continued)

TYPE 57NC5F – TYPICAL

Mounts to printed circuit boards. Special PC type terminals

“snap-in” precut boards. See drawing. Tubular metal shell

with ground contact. Part Number 58NC3F mates with

either 3 pin or 5 pin (at 180°) plugs because of its 2 extra

blanks in the contact insert.

Part Number Description Contact Arrang ement

◊57NC5F 5 contacts at 180° F

◊58NC3F 3 contacts at 180° C

2 extra blanks

◊60NC4F 4 contacts at 210° D

◊61NC5F 5 contacts at 240° E

◊62NC7F 7 contacts at 270° H

◊62NC8F 8 contacts at 270° N

Part Number Description Pin Arrangement

◊55HA2F 2 contacts with A

closed-circuit switch

(Schematic #4)

57HB3F* 3 contacts at 180° B

57HB5F* 5 contacts at 180° F

60HA4F 4 contacts at 210° D

61HA5F 5 contacts at 240° E

62HB7F* 7 contacts at 270° H

62HB8F* 8 contacts at 270° N “C” in par t number indicates PC ter minals.

◊Available on special order only; contact Switchcraft for price and deliver y.

*Flared solder terminals

“A” in part number indicates straight ter minal. (solder lug).

◊Available on special order only; contact Switchcraft for price and deliver y.

ORDERING INFORMATION ORDERING INFORMATION

TYPE 61HA5F – TYPICAL

Female receptacle with ground contact. Chassis or panel

mount. Diecast bayonet extension shell with mounting flange.

Mates with all lockring plugs. such as Par t Number 12CL5M.

Part Number 55HA2F includes closed-circuit switch (1-B). All

receptacles have straight solder terminals, except as noted.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

DIN RECEPTACLES

TYPE 57PC5F–TYPICAL

Mounts to PC boards.Plugs connect at right-angle to mounting

surface. Part Number 57PC3F mates with either 3 or 5 pin

(at 180°) plugs because of two extra blanks in contact insert.

ground contact provides complete shielding through receptacles.

RIGHT-ANGLE

RECEPTACLE

for Printed Circuit

Board Mounting

Part Number Description Contact Arrangement

◊57PC3F 3 contacts at 180° B

◊57PC5F 5 contacts at 180° F

◊60PC4F 4 contacts at 210° D

◊61PC5F 5 contacts at 240° E

◊61PC6F 6 contacts at 240° G

◊62PC7F 7 contacts at 270° H

◊62PC8F 8 contacts at 270° N

◊Available on special order only; contact Switchcraft for price and deliver y.

ORDERING INFORMATION

.709

61PC5F, 61PC6F

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

DIN RECEPTACLES

RIGHT-ANGLE

SHIELDED RECEPTACLE

for printed circuit board

mounting

TYPE 60PC4FS–TYPICAL

Similar to 57PC5F – Typical, except flange surrounding face

of inser t is metal to provide through-grounding between plug

and receptacle and to potential panel/chassis for common

grounding.

Part Number Description Contact Arrangement

◊57PC3FS 3 contacts at 180° B

◊57PC5FS 5 contacts at 180° F

◊60PC4FS 4 contacts at 210° D

◊61PC5FS 5 contacts at 240° E

◊61PC6FS 6 contacts at 240° G

◊62PC7FS 7 contacts at 270° H

◊62PC8FS 8 contacts at 270° N

SPECIFYING NOTE: Another series of receptacles with a trimmed metal flange

.052" (1.32 mm) below housing top is available. Replace suffix “S” with “T” in

par t numbers above to specify these receptacles or contact Switchcraft.

Mounting: #2 or #3 self-tapping screw.

◊Available on special order only; contact Switchcraft for price and deliver y.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MINI-DIN RECEPTACLES

Miniature DIN right-angle connectors are designed for

personal computer, video and data communications, medical

and instrumentation equipment and systems.

RIGHT-ANGLE, PC MOUNT RECEPTACLES

Available with 3 through 8 contacts, female only, receptacles

also have a standard (and separate) ground contact system.

Ground terminal can be straight or snap-in type. Snap-in

terminals are bifurcated to assure tight hold down on PC

board before, during and after soldering. Solder wicking

around the terminal strengthens the connection. Additionally,

PC terminals are staggered to assure more “hold down”

capability during solder ing.

Receptacle/plug retention is “fr iction” type, and a separate

outer shield can be specified.

Series SMD*FRAX10: 3 through 8 contacts, female,

right-angle PC mount, straight ground terminal, and

no outer shield.

Series SMD*FRAX20: Same as SMD*FRAX10, except

with bifurcated snap-in ground terminal.

Series SMD*FRAX11: 3 through 8 contacts, female,

right-angle PC mount, straight ground terminal, and

outer shield.

Series SMD*FRAX21: Same as SMD*FRAX11, except

with snap-in ground terminal.

Series DMD*FRAX111: Dual stacked miniature DIN

connectors, available in 4, 5, 6, and 8 contacts. Shielded

and non-shielded versions available.

Dimensions: .552" (14 mm) wide x .502"

(12.8 mm maximum depth x .642" (16.3 mm) height,

including terminals.

SPECIFICATIONS

Ratings: 1A, 100 VAC; 2A, 12 VDC.

Insulation Resistance: 50 MΩminimum

Dielectric Strength: 250 VDC for 1 minute.

Contact Resistance: 30 mΩmaximum

Insertion/Withdrawal Force: 0.8 to 5 kilograms

Withdrawal Force: 0.8 to 4 kilograms

Contacts/Terminals: Copper alloy, silver or gold-plated

Ground T erminal: Copper alloy, nickel-plated.

External Shield: Copper alloy, solder-coated.

Body: Black molded ther moplastic, UL 94V-0.

MINI-DIN RIGHT-ANGLE RECEPTACLES

DIN RECEPTACLES (continued)

MINI-DIN RIGHT-ANGLE RECEPTACLES PART NUMBER SCHEME

Series Contacts Style Shield/Ground Optional Mounting Screw Hole

SMD-Single Inser t#: FRA 110: Unshielded, no snap-in ground A: Adds screw hole

DMD-Dual 3-8 111: Shielded, no snap-in ground Blank: None

120: Unshielded, snap-in ground

121: Shielded, snap-in ground

Note: Dual available in 4,5,6, and 8 only

Note: Snap-in ground available on single only

Note: Optional mounting screw hole available on dual only

Note: Special order only, contact factory for details

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

RECOMMENDED PC BOARD LAYOUTS (Viewed from component side)

SMD SERIES

DIN RECEPTACLES (continued)

MINI-DIN RECEPTACLES

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

DMD SERIES

DIN RECEPTACLES (continued)

MINI-DIN RECEPTACLES

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

SINGLE AND DUAL STACKED USB CONNECTORS

Switchcraft introduces single and dual USB connectors.The USB

connectors are fast becoming the industry standard for plug and

play connectivity between PCs and their peripherals. The DUSB

and USB connectors are RAPC mounted, with kinked terminals for

snap-in placement to the PC board. Both meet all Universal Ser ial

Bus standards.

FEATURES AND BENEFITS

• Snap-in terminals facilitate wave soldering

• Shielded for reduced EMI/RFI emissions

• Dual stacked version increases PC board density

APPLICATIONS

• Personal Computer

• Data Communications

• Medical Equipment

• Test Equipment

• Instrumentation

SPECIFICATIONS

GENERAL

Voltage Rating: 30 VAC (rms) Max.

Current Rating: Signal application only, 1A Max. per contact

Contact Resistance: 25m ohms Max. initial

Temperature Rating: 32°F to 104°F (0°C to 40°C)

Insertion Force: 7.7 lbs Max. (3.5 kg Max.)

Withdrawal Force: 0.8 lb Min. (0.4 kg Min.)

Life: 1500 cycles

MATERIALS

Body: Black, molded ther moplastic, UL 94V-0

Shell: Copper alloy, tin plated

Contact T erminal: Copper alloy, gold plating in mating area,

tin plating on solder tails, all over nickel plating.

Part Number Description

SUSB Single USB Connector

DUSB Dual Stacked USB Connector

SINGLE AND DUAL STACKED USB CONNECTORS

Note: Special order only, contact factory for details.

SUSB DUSB

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

SINGLE AND DUAL STACKED USB CONNECTORS

SINGLE AND DUAL STACKED USB CONNECTORS (continued)

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

IEEE 1394 FIREWIRE CONNECTORS

1394RAPC 1394SMT

Switchcraft introduces both right angle PC and surface

mount versions of IEEE 1394 Firewire connectors. The

Firewire connectors are becoming another connector

standard used in the upcoming multimedia/computer

market. The connectors meet IEEE 1394R-4006N Series

standards.

FEATURES AND BENEFITS

• Shielded housings to reduce EMI/RFI emissions

• Mounting posts add stability for wave soldering

• Low profile requires less space

APPLICATIONS

• Multimedia

• Video

• Personal Computers

• Computer Peripherals

SPECIFICATIONS

GENERAL

Voltage Rating: 40 VAC

Current Rating: 1.5A

Contact Resistance: 30m Ohms Max.

Temperature Rating: -55°C to +105°C

Insertion Force: 6.0 lbs. Max.

Withdrawal Force: 4.4 lbs. Min.

Lifecycles: 1,500 Min.

IEEE 1394 FIREWIRE CONNECTORS

Part Number Description

1394RAPC IEEE 1394 RAPC

1394SMT IEEE 1394 SMT

Note: Special order only, contact factory for details.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

IEEE 1394 FIREWIRE CONNECTORS (continued)

IEEE 1394 FIREWIRE CONNECTORS

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

DESIGN FEATURES

Slim-Line®Audio Connectors are a unique ser ies of premium

quality connectors featuring interchangeable inserts which

allow any plug or receptacle to be male or female. This

versatility is valuable in a wide variety of applications:

microphones, public address systems, 2-way, CB, ham, and

marine radios, audio-visual systems, industrial control and

instrumentation, broadcast, secur ity and medical electronics.

APPLICATIONS

Retrofit/Replacement; Slim Line Cord Plug (SL405M) and

Receptacle (SL105F) are recommended as a possible choice

to replace Switchcraft/DIN plug (12CL5M) and receptacle

(55HA5F).Receptacle SL105F fits the same mounting holes

as the Switchcraft/DIN receptacle.

Four pin/contact Slim-Line plugs and receptacles are

recommended as direct replacements for the original

Slim-Line connectors, Series 2504, and for the molded

version of the Slim-Line connector, Style ST34.

RECEPTACLES

Three types of receptacles can be specified:

1. Flang e mount (Series SL10)

2. Rear of panel mount (Series SL17)

SLIM-LINE CONNECTORS

HEX NUT

Used in mounting

rear or front of

panel receptacles

(supplied standard).

THREADED

BUSHING

Coupler ring on

mating plug threads

onto bushing and

keeps plug/receptacle

from working loose.

FEMALE INSERT*

Rugged molded

black plastic barrel

construction;

positively keyed to

housing.

LOCK WASHER

Prevents rear

or front of panel

receptacle from

working loose

when installed

(supplied standard).

REAR OF

PANEL MOUNT

RECEPTACLE

Tough, plated

diecast housing

with non-reflecting

matte finish. Mounts

in D-shape (self-

keyed) hole. Other

receptacle types

are: Front of Panel

Mount and Flange

Mount.

FLAT WASHER

Used in mounting

rear and front of

panel receptacles

(supplied standard).

CONTACT

TERMINALS

Rugged solder lug

type; copper alloy

plated

CONTACTS

Held captive in

insert. Excellent pin

retention force.

Copper alloy plated.

MALE INSERT*

Rugged black

plastic; keyed to

housing. Durable

plated copper alloy

pins are 100%

molded-in.

*NOTE: Insert

fits both plug

and receptacle

housings; can be

interchanged at

any time.

LATCH SPRING

Captive spring locks

insert to housing

COUPLER RING

Held captive on plug;

non-reflective matte

finish.Threads onto

receptacle bushing

(or mating plug) to

hold connector

halves secure

from accidental

separation.

LATCH DETENT

Latch spring on

insert seats in

detent to hold insert

firmly in housing.

FLATTED BARREL

Keys to inside flat

on male insert.

Polarizes the con-

nection. Correct

mating every time.

PIN TERMINALS

Large, rugged plated

copper alloy; solder

cup type.

CABLE CLAMP

Extra large and

rugged clamp pro-

tects soldered ter-

minations (also

facilitates grounding/

shielding feature

when used on

receptacle insert).

CORD PLUG

HOUSING

Precision-drawn,

plated copper alloy

with non-glare

matte finish.

STRAIN RELIEF

SPRING

Provides positive

relief from cable

wear at opening in

plug housing.

Receptacles can be specified with same male and f emale insert

combinations as cord plugs. For rear and front of panel

mounting types, hex nuts, lock washers, and flat washers are

supplied.For flange mount receptacles, mounting holes in flange

accept #4 machine screw or .125" (3.18 mm) diameter rivet.

CORD PLUGS

Miniature Cord Plugs feature nickel-plated copper alloy

housings with matte finish on exterior parts. Plugs may be

specified with inserts having 2-, 3-, 4- and 5-pins (male) or

contacts (female), or 2-, 3-, or 4-contact receptacles having

shunts (N.C.) on two contacts (special order only). Extra large

cable clamp protects against pulling and twisting strains on

terminations. Strain relief spring protects against excess cable

wear at entry point at rear of housing.Cord plugs accept cables

up to .281" (7.14 mm) diameter. Captive coupler ring feature

(Series SL40) provides secure mechanical connection and

protection against shock and vibration between cord plugs and

mating plug (Series SL41) or receptacle.

TYPICAL SL172F REAR MOUNT RECEPTACLE TYPICAL SL402M CORD PLUG

SLIM-LINE CONNECTORS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

SLIM-LINE CONNECTORS

Inser t is installed from front, and the captive latch spring locks

insert to housing. To remove insert from receptacle, depress

latch spring and apply pressure to rear of insert (DO NOT

APPLY PRESSURE TO TERMINALS).On cord plugs, depress

latch spring and press in on strain relief to free the insert.

GROUNDING/SHIELDING

Housings shield internal connections and provide ground

(common) connections without using a pin/contact. On cord

plugs, ground lead (or shield) is connected to cable clamp .F or

receptacles Cable Clamp, SL04 is ordered separately as a

special and installed.If desired, ground/shield connection may

then be made to clamp. When mated, a continuous, shielded,

low resistance path is made through the connector.

SPECIFICATIONS

MATERIALS

Receptacle Housings:Die-cast zinc, nickel-plated.

Cord Plug Housings:Copper alloy, nickel-plated.

Inserts:Glass-reinforced thermoplastic. UL 94 V-0.

Female Contacts:Copper alloy, silver-plated, solder lug type.

Pins:Copper alloy, silver-plated, solder cup type.

Cable Clamp, Strain Relief, and Mounting Hardware:

Steel, plated. Latch:Steel, plated.

ELECTRICAL

Current Rating:5 Amps carry only.

MOUNTING

Cord Plugs: Plugs accept cables up to .281" (7.14 mm) diameter.

Receptacles: Flange mount type mounts in panels or chassis

up to .188" (4.78 mm) thick. .125" (3.18 mm) diameter holes

accept #4 machine screws or .125" (3.18 mm) diameter rivets.

Rear and front of panel types mount in “D”-shaped hole in panels

or chassis up to .219" (5.56 mm) thick.Hex nut (SL01), lockwasher

(SL02), and flat washer (SL03) are supplied for mounting.

CABLE CLAMP AND STRAIN RELIEF

Cord Plugs: Plugs are supplied with rugged cable clamps and

strain relief springs.Cable clamp serves two v aluable functions: to

firmly hold cable to prevent pulling or twisting strains on soldered

terminations, and as a connecting point for ground (common) or

shield when grounding/shielding through the connector is

required.

Receptacles: Receptacles are not supplied standard with

cable clamp for strain relief. If grounding/shielding feature is

desired, separate Cable Clamp, SL04, is installed on receptacle

insert.

MOUNTING HARDWARE

(Supplied with Series SL17 and SL18 receptacles)

INSERTS

Inserts are molded of high-strength plastic, and are

completely interchangeable between plug and receptacle

housings at any time .Inserts are key ed to housings , and male

and female inser ts are polar ized to prevent mismating.

Part Number Item

◊SL01 Hex Nut

◊SL02 Lockwasher

◊SL03 Flat W asher

◊SL04 Cable Clamp

◊SL05 Strain Relief Spring

Pins

Contacts

Contacts (Shunts)

2 (N.C. Shunt on each contact)

3 (N.C. Shunts on contacts 1 and 3)

4 (N.C. Shunts on contacts 1 and 4)

PIN/CONTACT CONFIGURATIONS:

◊Add an “S” to end of par t number for shunts. Special order only.

SLIM-LINE CONNECTORS (continued)

PIN AND CONTACT ARRANGEMENTS

SCHEMATIC CIRCUITS

SLIM-LINE CONNECTOR PART NUMBERING SYSTEM Number of

SERIES HOUSING TYPE Contacts Gender Options

SL SLIM-LINE NONE 2 M MALE S WITH SHUNTS

10 RECEPTACLE, FLANGE MOUNT 3 F FEMALE

17 RECEPTACLE, REAR MOUNT 4

18 RECEPTACLE, FRONT MOUNT 5

40 CORD PLUG WITH COUPLING RING

41 CORD PLUG WITHOUT COUPLING RING

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

SLIM-LINE CONNECTORS

◊Available on special order only; contact Switchcraft for price and deliver y.

Non-reflective metal shell; coupling ring; 2 through 5 pins

(male) or 2 through 5 contacts (female). Also 2-, 3- and

4-contact inserts with two shunted (N.C.) contacts. Efficient

cable clamp and strain relief.

Non-reflective metal shell; 2 through 5 pins (male) or

2 through 5 contacts (f emale).Also 2-, 3- and 4-contact inserts with

two shunted (N.C .) contacts.Efficient cable clamp and strain relief .

SL40 CORD PLUG with Coupler Ring SL41 CORD PLUG without Coupler Ring

SLIM-LINE CONNECTORS (continued)

SL MALE CORD PLUGS

SL FEMALE CORD PLUGS

SL MALE CORD PLUGS

SL FEMALE CORD PLUGS

STRAIN RELIEF SPRING

Strain Relief Spring

Part Number SL05

Part Number Pins Arrangements

SL402M 21

SL403M 32

SL404M 43

SL405M 54

Part Number Pins Arrangements

SL413M 32

SL414M 43

SL415M 54

Contact

Part Number Contacts Arrangements

SL412F 2A

SL413F 3B

SL414F 4C

SL415F 5D

Contact

Part Number Contact Arrangements

SL402F 2A

SL403F 3B

SL404F 4C

SL405F 5D

SL402M (typical) SL413F (typical)

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

Flange mounted; 2 through 5 pins (male) or 2 through 5 contacts

(female). Also 2-, 3- and 4-contact inser ts with 2 shunted (N.C.)

contacts.

Rear of panel mount; 2 through 5 pins (male) or 2 through

5 contacts (female). Also 2-, 3- and 4-contact inserts with

2 shunted (N.C.) contacts. Mounting locknut (Part Number

SL01), lock washer (Part Number SL02), and flat washer

(Part Number SL03) supplied.

SL10 RECEPTACLES

Flange Mount SL17 RECEPTACLES

Rear of Panel Mount

SL MALE RECEPTACLES

SL FEMALE RECEPTACLES

SL MALE RECEPTACLES

SL FEMALE RECEPTACLES

Part Number Pins Arrangements

SL102M 21

SL103M 32

SL104M 43

SL105M 54

Part Number Pins Arrangements

SL173M 32

SL174M 43

SL175M 54

Contact

Part Number Contacts Arrangements

SL172F 2A

SL173F 3B

SL174F 4C

SL175F 5D

Contact

Part Number Contacts Arrangements

SL102F 2A

SL103F 3B

SL104F 4C

SL105F 5D

SL175F (typical)

SL104F (typical)

SLIM-LINE CONNECTORS (continued)

◊Available on special order only; contact Switchcraft for price and deliver y.

SL17 and SL18 Receptacles

Non-turn panel cut-out

SLIM-LINE CONNECTORS

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

SLIM-LINE CONNECTORS (continued)

Front of panel mount; 2 through 5 pins (male) or 2 through

5 contacts (female). Also 2-, 3- and 4-contact insert with

3 shunted (N.C.) contacts. Mounting locknut (Part Number

SL01), lockwasher (Part Number SL02), and flat washer

(Par t Number SL03) supplied.

SL18 RECEPTACLES

Front of Panel Mount INSTALLING CABLE CLAMP ON INSERT

To install cable clamp on any insert:

1. Position insert approximately as shown in the diagram.

2. Hold clamp at approximately 30° angle (as shown). Place

tip of clamp center finger into slot under molded ring “A”.

Note position of notch on inser t in relation to slot.

3. Press center finger forward into slot and reduce angle of

clamp until clamp shoulders seat just ahead of molded

barrier on rear of inser t “B”.

SL MALE RECEPTACLES

SL FEMALE RECEPTACLES

Part Number Pins Arrangements

SL182M 21

SL183M 32

SL184M 43

SL185M 54

Contact

Part Number Contacts Arrangements

SL182F 2A

SL183F 3B

SL184F 4C

SL185F 5D

SL183FS (typical)

PANEL HOLE

.696

(17.7)

Cable Clamp SL04

MOLDED

RING

“A”

NOTCH

INSERT INSERT

“B”

CABLE

CLAMP

SLIM-LINE CONNECTORS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

AUDIO CONNECTORS

CB-3F 3-contact female cord plug. Knurled coupling ring has

internal metric M16x1 thread. Solder lug terminals accept wires

up to #18 AWG. Accommodates cables up to .281" (7.14 mm)

diameter.

CB-4F Same as CB-3F. except 4 contacts.

CB-3M 3-pin male receptacle. Housing keys insert of mating plug;

bushing with e xternal M16x1 metric thread mates with coupling ring

on plug. Cup-type ter minals accept wires up to #16 AWG. Mounts

in .64" (16.26 mm) diameter hole from front of panels up to .125"

(3.18 mm) thick, using washer and locknut supplied. Can also be

“D”-hole mounted for non-turn mounting (see drawing).

Pin diameter. is .093".

CB-4M Same as CB-3M, except 4 pin.

Connectors with 5/8-27 threads are designed for use with single

conductor microphone cable with .281" (7.14 mm) maximum

outside diameter. 44 adapts 2501F to fit standard 2-conductor

phone jack. Coupling ring on 2501F is removable for fast change

from female to male type. Spr ing assembled into body, cable braid

and spring clamped by hollow set screws .281" (7.14 mm)

maximum cable diameter. 2501MP mounts in .390" (9.92 mm)

diameter hole.

Approximately 1/2 the size of standard microphone connectors.

Ideal for miniature lapel microphones, musical instruments and

wherever small cable is used. Accepts single-conductor shielded

cable up to .187" (4.76 mm) diameter Coupling ring on 5501F

removable for quick change of female to male type. Cable is braid

spring clamped to body by hollow point set screw.

Miniature 3 and 4 circuit connectors f or microphone connections in

mobile/communications equipment. Cord plug has silver-plated

copper alloy contacts, large cable clamp, and strain relief spring.

CB CONNECTORS

MICROPHONE CONNECTORS

MINI-CON MINIATURE CONNECTORS

CB-3F

CB-3M

Insert Dimensions, In. (mm)

Part No. Contacts Length Diameter

CB3F 31.594 (40.49) .703 (17.86)

CB3M 3.781 (19.84) .705 (19.05)

44 2501M

2501F

5501F 5501M

5501MF 5501MP

2501MP

Mounting Hole,

Part Number Description Inches (mm)

5501F Female Plug —

◊5501M Male Plug —

.375 (9.52)

◊5501MF Receptacle (Front of panel)

.375 (9.52)

5501MP Receptacle (Front of panel)

◊Available on special order; contact Switchcraft for price and deliver y.

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

BNC CONNECTORS

Switchcraft Inc.introduces a complete line of true 75 Ohm BNC cable

mount connectors.This new series was developed for the broadcast

industry, or wherever true 75 Ohm impedance BNC's are used. The

HP75BNC Series is available in a wide range of styles, to

accommodate the most popular types of coaxial cables. All are crimp

terminated using standard crimping tools.

FEATURES AND BENEFITS

• True 75 Ohm impedance

• Gold-plated center pins for increased life

• Available for a wide range of cable types

• Outstanding electrical performance

• Rugged nickel-plated, machined shells

SPECIFICATIONS

Electrical

Characteristic Impedance: 75 Ohms

Voltage Rating: 500 Volts RMS

Return Loss: Less than -25 db at 3 GHz

Insulation Resistance: 5000 Megohms min

MECHANICAL

Lifecycles: 500 min

Center Contact Retention: 6 lbs.min

Coupling Mechanism: 100 lbs. min

Force to Engage: 2.5 lbs. max

ENVIRONMENTAL

Thermal Shock: -65° C to 165° C

Moisture Resistance: Mil Std 202

Corrosion: Mil Std 202

Flammability: UL 94-VO

Vibration: Mil Std 202

Solvent Resistance: Mil Std 202

FINISH

Body/Bayonet: Nickel-plated copper alloy

Center Conductor: 50 mi gold-plated copper alloy

HP75BNC SERIES BNC CONNECTORS

Part Number Cable T ype

HP75BNC1 Belden #8241

HP75BNC2 Belden #8281B

HP75BNC6 Belden #1695A

HP75BNC7 Belden #1694A

HP75BNC9 Belden #1505A

HP75BNC10 Belden #1506A

HP75BNC12 Belden #1855A

ORDERING INFORMATION

HP75BNC9

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

BNC CONNECTORS

S11 log MAG

5 dB / DIV

REF -15 dB

.30

MHz 3.0

GHz

1.5

GHz

RETURN LOSS

HP75BNC SERIES BNC CONNECTORS (continued)

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

EAC RECEPTACLES

EAC333 EAC333S

Receptacles are designed for use in European and domestic

instrumentation, power rack mounted devices, test equipment

and appliances. Three-pin male receptacles have .125" (3.18

mm) longer center (ground) pin. Ground circuit is established

before power circuits “make”, and is maintained until after power

circuits “break”.

SERIES EAC

Two and three-pin/contact grounding primary power

receptacles are designed to meet EN 60 320, as well as

applicable UL, CSA, VDE and other specifications.

Receptacles feature choice of shor t, standard or long solder

lugs or FASTON ® terminals. Receptacles snap-in or screw

mount from the front or rear of panel. Receptacles have

orbitally riveted lugs (except EAC233, EAC305, EAC323

EAC325, EAC333, EAC405) for superior mechanical/electri-

cal connections. Extended socket versions permit minimum

behind-panel depth.

EAC RECEPTACLES

EAC227

EAC305

EAC309

EAC311

EAC323

EAC325

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

EAC305—3-contact female receptacle. Front mount with

two, #4 screws or .094" (2.38 mm) diameter rivets

(not supplied).

EAC309—3-pin male receptacle with standard lug terminals.

Mounts from front or rear of panel with two, #5 screws or

.125 " (3.18 mm) diameter rivets (not supplied).

EAC311—3-pin male receptacle with FASTON®terminals.

Mounts from front or rear of panel with two, #5 screws or

.125 " (3.18 mm) diameter rivets (not supplied).

◊EAC315—3-pin male receptacle with long solder lug terminals.

Mounts from front or rear of panel with two , #5 scre ws or .125"

(3.18 mm) diameter rivets (not supplied).

◊EAC319—3-pin male receptacle with short solder lug

terminals. Mounts from front or rear of panel with two,

#5 screws or .125" (3.18 mm) diameter r ivets (not supplied).

◊EAC323—3-pin male receptacle with short solder lug terminals.

Extended sock et housing (mounting flange on rear of receptacle)

provides more behind panel clearance. Mounts with two,

#4 screws or .094" (2.38 mm) diameter rivets (not supplied).

EAC325—3-contact female receptacle with short solder lug

terminals. Extended housing (mounting flange on rear of

receptacle) provides more behind panel depth.Mounts with two ,

#4 screws or .094" (2.38 mm) diameter rivets (not supplied).

EAC327—3-pin male receptacle, similar to EAC319 except

with standard solder lugs.

EAC333—3-pin, 10A, 250V male receptacle with right-angle

housing for PC mount. PC terminal and hole mounting details

are the same as for EAC233. Ground pin is integral with

ground solder lug on rear of receptacle.

◊EAC333S—Similar to EAC333, but with two, snap-in

retainers through mounting flanges for PC mount.

◊EAC405—3-contact female receptacle with standard solder

lug terminals. Snap-in panel mounting.

EAC409—3-pin male receptacle with standard solder lug

terminals. Snap-in panel mounting.

EAC411—3-pin male receptacle with FASTON terminals.

Snap-in panel mounting.

EAC413—3-pin male receptacle with FASTON terminals on

LINE and NEUTRAL and a solder lug on EARTH GROUND.

Snap-in panel mounting.

EAC451—3-contact female receptacle with straight PC

terminals for use in “HO T”applications.Snap-in panel mounting.

EAC453—Same as EAC451 except with solder lug

terminations.

EAC455—Same as EAC451 except with FASTON

terminations.

EAC457—Same as EAC451 except with FASTON power

terminations and solder lug ground ter mination.

◊Available on special order only; contact Switchcraft for price and deliver y.

SERIES EAC

EAC RECEPTACLES (continued)

SPECIFICATIONS

ELECTRICAL

Insulation Resistance: 2 million megohms @ 500 V DC.

Dielectric Strength: 1500 V (rms).

Arcing T est: Meets UL 498 Standard.

MECHANICAL

Solderability Standard: Meets MIL-STD-202, method 208,

EIA RS-186-9E.

ENVIRONMENTAL

Thermal Range: -55° C to +65° C (except EAC45x series).

Salt Spray: Meets MIL-STD-202, method 101; EIA-RS-186-5E,

method 5.

MATERIAL

Shell: EAC307 through EAC327. Black polyester. EAC303,

EA C307 through EA C315.UL flammability rating of UL94 V-0,

yellow card #E45575.

EAC309 through EAC327, EAC333. Black polyester, UL

flammability rating of UL94 V-0, yellow card #E45575.

EAC233, EAC233S, EAC305, EAC325, and EAC333S. Black

polycarbonate, UL flammability rating of UL94 V-0, yellow

card #E45329.

EAC323, EAC409 through EAC411 Black polycarbonate, UL

flammability rating, or equivalent UL94 V-0, yellow card

#E33640, or equivalent.

Pins, Contacts and Terminals: Plated copper alloy.

◊EAC227—2-pin male receptacle with standard solder lug

terminals, similar to EAC327.

◊EAC233—2-pin, male receptacle with right-angle housing

for PC mount. PC ter minals project .130" (3.3 mm) to extend

through PC board. Rear of panel mount. Two, .136 " (3.45

mm) diameter holes permit fastening to PC board; two

additional .136" (3.45 mm) holes are for fastening to panel or

chassis, if required.

◊EAC233S—Similar to EAC233, but with two, snap-in

retainers through mounting flanges for PC mount.

EAC405

EAC RECEPTACLES

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

Pins/ Switchcraft

Part Number Contacts 1Mounting 2Terminals Listings Ratings Mating Number 3Comments 4

◊EAC227 MFront or Rear Solder Lug UL 15 A, 250 V AC P2392 —

CSA

◊EAC233 MRear PC UL, CSA, 15 A, 250V AC P2392 Semko, Demko, Nemko,

VDE 10 A, 250 V AC SETI, and SEV Approved

◊EAC233S MRear PC UL, CSA, 15 A, 250 V AC P2392 Semko, Demko, Nemko,

VDE 10 A 250 V AC SETI, and SEV Approved

◊EAC305 FFront Solder Lug UL & VDE 15 A, 250 V AC —Semko, and SEV Approved

VDE 10 A, 250 V AC

◊EAC309 MFront or Rear Solder Lug UL & CSA 15 A, 250 V AC P2392 Demko, Semko, Nemko,

VDE 10 A, 250 V AC SETI and SEV Approved

◊EAC311 MFront or Rear FASTON UL & CSA 15 A, 250 V AC P2392

VDE 10 A, 250 V AC

◊EAC315 MFront or Rear Solder Lug UL & CSA 15 A, 250 V AC P2392

(Long) VDE 10 A, 250 V AC

◊EAC319 MFront or Rear Solder Lug UL & CSA 15 A, 250 V AC P2392 —

(Short) VDE

◊EAC323 MFront or Rear Solder Lug UL & CSA 15 A, 250 V AC P2392 Mounting flange on rear

(Short) VDE 10 A, 250 V AC Semko, Nemko, SETI Approved

◊EAC325 FRear Solder Lug UL & CSA 15 A, 250 V AC —Mounting flange on rear

(Short) VDE 10 A, 250 V AC

◊EAC327 MFront or Rear Solder Lug UL & CSA 15 A, 250 V AC P2392 Demko, Semko, Nemko

VDE 10 A, 250 V AC SETI and SEV Approved

◊EAC333 MRear PC UL, & VDE 15 A, 250 V AC P2392

CSA 10 A, 250 V AC

◊EAC333S MRear PC UL & VDE 15 A, 250 V AC P2392

CSA 10 A, 250 V AC

◊EAC405 5FSnap-In Solder Lug UL & CSA 15 A, 250 V AC ——

VDE 10 A, 250 V AC

◊EAC409 5MSnap-In Solder Lug UL, & CSA 15 A, 250 V AC P2392 Demko, Semko, Nemko,

VDE 10 A, 250 V AC SETI and SEV Approved

◊EAC411 5MSnap-In FASTON UL, CSA 15 A, 250 V AC P2392

Semko, Demko, Nemko,

VDE 10 A, 250 V AC SETI and SEV Approved

◊EAC413 5MSnap-In Solder Lug/ UL, CSA 15 A, 250 V AC

P2392

Semko, Demko, Nemko,

FASTON VDE 10 A, 250 V AC SETI and SEV Approved

◊EAC4516FSnap-In6PC UL, & CSA 15 A, 250 V AC —Rated for use up to 120°C

VDE 10 A, 250 V AC

◊EAC4536FSnap-In6Solder Lug UL, & CSA 15 A, 250 V AC —Rated for use up to 120°C

VDE 10 A, 250 V AC

◊EAC4556FSnap-In6FASTON UL, & CSA 15 A, 250 V AC —Rated for use up to 120°C

VDE 10 A, 250 V AC

◊EAC4576FSnap-In6Solder Lug/ UL, & CSA 15 A, 250 V AC —Rated for use up to 120°C

FASTON VDE 10 A, 250 V AC

Semko, Demko, Nemko,

SETI and SEV Approved

Semko, Demko, Nemko,

SETI and SEV Approved

Semko, Demko, Nemko,

SETI, SEV Approved

Semko, Demko, Nemko,

SETI, SEV Approved

SERIES EAC (continued)

1 M = Male; F = Female.

2 F = Front; R = Rear. See mounting drawings for mounting details.

3 Also mates with Belden and other standard cords.

4 Semko (Sweden), Demko (Denmark), Nemko (Norway), SETI (Finland), SEV (Switzerland).

5 Receptacles are snap-in mount, and can be ordered to accommodate

.030, .040, .050 and .060 inch panel thickness.For snug fit in panel or

for other specifying assistance, contact Switchcraft.

6 Available only for .050 inch and .060 inch panel thickness

◊Available on special order only; contact Switchcraft for price and deliver y.

UL No. E38829—EAC-309 thru -327 UL No. E65081—EAC-305

CSA Guide 365-E-1, Class 6233, File Card No. LR27474

VDE Certificate of Compliance No .731 (EAC-305, -325, -405),

all others VDE approval No.3181.

If you have been using a 15 amp rated Switchcraft EAC connector

ending in an even number, you can now buy an identical par t number

that has a 10 amp European rating in addition to the 15 amp UL and

CSA approval. The part number for the new dual rated part is one

less than the old part number (eg. EAC310 becomes EAC309,

EAC412040 becomes EAC411040, EAC234 becomes EAC233,

EAC458050 becomes EAC457050, etc.)

EAC RECEPTACLES

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

SERIES EAC

EAC RECEPTACLES (continued)

Note: Unless otherwise specified, all dimension tolerances are ± .01" (+0.25 mm)

Front Mount

EAC227, EAC309,

EAC311, EAC315,

EAC319, EAC327

Front Mount

EAC225

Figure 5

Front Mount

EAC305

Figure 2

Front Mount

EAC323

Figure 4

Snap-in Mount

EAC405, EAC451, EAC453,

EAC455, EAC457

Snap-in Mount

EAC409, EAC411

Rear Mount

EAC325

Figure 9

Rear Mount

EAC323

Figure 6

EAC233, EAC309,

EAC311, EAC315,

EAC319, EAC327,

EAC333

Figure 7

Recommended

PC Board Layout

EAC233, EAC333

Figure 10

Note: Center .07 inch diameter

hole not used for 233, 234

EAC RECEPTACLES

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

Note: Unless otherwise specified, all dimension tolerances are ± .01" (+0.25 mm)

EAC227 EAC233S, EAC333S

Note: Center PIN/Terminals

not used on EAC233S

EAC327 EAC309, EAC315

EAC233, EAC333EAC311

Note: Center

PIN/Terminals not

used on EAC233

Chassis/Panel Opening

Recommended PC Board

Layout (Component Side)

Note: Center

.07 inch dia.

hole not

used on

EAC233

EAC RECEPTACLES (continued)

SERIES EAC

EAC RECEPTACLES

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

SERIES EAC

EAC RECEPTACLES (continued)

EAC319, EAC327 EAC323

EAC325 EAC405

EAC409 EAC411

EAC RECEPTACLES

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

EAC413 0.875

REF

[22.23]

1.065

[27.05]

1.079

±.004

[27.41 ± .10]

+ .008

0.120 - .005

+ .20

[3.05 ]

- .12

+ .005

0.940 - .008

+ .12

[23.88 ]

- .20

0.779

±.004

[19.79 ± .10]

0.806

±.008

[20.47 ± .20]

0.610REF

“E”

[15.49]

0.157R

[3.99]

0.079

[2.01]

0.079

[2.01]

0.276

[7.01]

0.276

[7.01]

0.760

[19.30]

0.656

[16.66]

0.160

[4.06]

0.281

[7.14]

0.032

[0.81]

0.490

[12.45]

1.260

MAX

[32.00]

1.130

MAX

[28.70]1.030

MAX

[26.16]

1.220

±.010

[30.99 ± .25]

0.955

±.008

[24.26 ± .20]

0.640

±.009

[16.26 ± .22]

.078 x .157

[1.98 x 3.99]

SERIES EAC

EAC RECEPTACLES (continued)

EAC RECEPTACLES

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

EAC451

RECOMMENDED P.C. BOARD LAYOUT

SERIES EAC

EAC RECEPTACLES (continued)

EAC RECEPTACLES

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

EAC453

EAC455

FAST-ON TERMINAL

SERIES EAC

EAC RECEPTACLES (continued)

EAC RECEPTACLES

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

FAX: 773 792-2129

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

EAC457

SERIES EAC

EAC RECEPTACLES (continued)

EAC RECEPTACLES

* Please visit the product pages on our website for the most up-to-date product information

CONNECTORS & RECEPTACLES

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

CONNECTORS & RECEPTACLES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

POWER INLET SOCKET

Switchcraft introduces the RAPC322, an IEC320 inlet

developed as a low power interconnect used in a variety

of applications. The RAPC322 is molded from 94-VO

rated material, is UL recognized, and meets a wide variety

of approvals including CSA and VDE.The RAPC is rated

at 2.5A at 250V. Applications for the RAPC322 include

notebook computers, medical devices, and data

communications products.

FEATURES AND BENEFITS

• Snap-in feet facilitate wave soldering

• Top and side slots allow chassis to captivate connector

• Confor ms to EN 60320-1/2

APPLICATIONS

• Appliance Inlet

• Personal Computer

• Data Communications

• Medical Equipment

• Test Equipment

• Instrumentation

SPECIFICATIONS

GENERAL

Current Rating: 5A, UL and CSA 2.5A, VDE and

SEMKO

Nominal Voltage: 250V

Temperature Rang e: - 55°C to 65°C

Dielectric Strength: 2000V @ 1 minute

MATERIALS

Housing: Black, molded thermoplastic, UL 94V-0

Male Pins: Copper alloy, nickel plated

PC T erminals: Copper alloy, tin plated

RAPC322 POWER INLET SOCKET

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

JACK SCHEMATICS

Circuit Types: Jacks normally have through circuits, shunt

circuits, and/or isolated switching circuits, either individually or

in various combinations.The chart below shows schematics of

39 common jacks - many more combinations are possible, but

these are the most commonly used. A basic description of the

switching action of each jack accompanies each schematic.

Military Identification: Military specifications covering phone

jacks use a special code to describe jack functions. Jack

schematic descriptions are coded J-1 through J-13 (as

appropriate) to coincide with Federal Item Identification

Guides for Supply Cataloging. One or more groups of suffix

numbers/letters identify isolated switching circuits used.

Suffixes identify the switching by industr y recognized notation,

i.e., 1-A, 1-B, 1-C, 1-D, etc. See chart below.

JACK SCHEMATICS

Notation Meaning

1-A One, SPST switching circuit. Also known as NO

(normally open) or “make” circuit.

1-B One, SPST switching circuit. Also known as NC

(normally closed) or “break” circuit.

1-C One, SPDT switching circuit. Also known as transfer

or “break” before “make” circuit.

1-D One, SPDT switching circuit. Also known as “make”

before “break” circuit.

Single open circuit. (J1.) Single closed circuit, Single closed circuit. (J4). Double open circuit. (J2). Single open circuit.

sleeve common. (J3). Isolated switching

“make” circuit. (J1-1-A).

Transfer circuit. (J5). Tip closed, r ing Tip closed, r ing open Single open circuit. Double closed circuit,

open. (J10). (common to sleeve). (J6). Isolated switching ring common to

“break” circuit. (J1-1B). sleeve. (J13).

Single closed. Isolated Double closed Single closed circuit. Double closed circuit. Double open circuit.

switching “make” circuit. (J7). Isolated switching Isolated switching Isolated switching

circuit. (J4-1A). transfer circuit. (J4-1C). “break” circuit. (J7-1B). transfer circuit. (J2-1C).

NOTE: Number indicates the quantity of circuit - 2-A means 2, A circuits.

Terminals locations shown on jack schematics do not necessarily coincide

with physical locations on jacks. Not all circuit types available on all jacks.

Double open circuit. Single closed circuit Single closed circuit– Single open circuit. Double open circuit.

Isolated switching– Isolated switching “make” before Isolated switching Isolated switching

separate “break” and “break” circuit. (J4-1B). “break”. (J8). transf er circuit. (J1-1C). “make” circuit.

make circuits (J2-1A-1B). (J2-1A).

Double open circuit. Double closed circuit. Single closed circuit Single open circuit. Single closed circuit.

Isolated switching– Isolated switching plus “make” before Isolated switching– Isolated switching

separate “make” “make” circuit on r ing “break”. Isolated separate transfer and “break” circuit. Sleeve

circuits on both tip and spring. (J7-1A). switching–“make” “make” circuits. common to isolated

ring. (J2-2A). before “break” (J1-1A-1C). switching circuit throw.

circuit. (J8-1D). (J4-1B).

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

JACK SCHEMATICS

Single closed circuit. Tip closed; ring open Single open (tip) Double jack, Single open circuit–

Isolated switching– circuits. Isolated circuit and single closed 2-conductors on each “make” before

“make” before “break” switching–two “make” (ring) circuit. (J9). side.Tip circuits cross “break”. (J11).

circuit. (J4-1D). circuits and one “break” shunted; common

circuit. (J10-2A-1B). sleeve. (J12).

Tip closed; ring closed Double closed circuit. Single closed circuit. Single open circuit. Double open circuit.

circuits. Isolated Separate sleeve Isolated switching– Isolated switching– Isolated switching–

switching–“break” “break” circuit. Two “make” circuits. Two “make” circuits. One “make” and one

before “make” circuit. “break” circuit.

Double closed circuit. Tip closed; ring open Double closed circuit. Double open circuit.

Isolated switching– circuits. Isolated Isolated switching– Isolated switching–

One “make” and one switching–One Two “make” circuits. “break” before

“break” circuit. “make” circuit. “make” circuit.

JACK MATING DATA

NOTE: See tables for jack/plug mating data

SPECIFYING NOTE: Due to assembly variations containing components

(solder lugs, wire-wrapping terminals, or both), these Jack Panel

Assemblies are available on special order only. Contact Switchcraft.

Switchcraft can build complete Jack Panel Assemblies with

jacks, lamp jacks and switches with wire-wrapping terminals. If

desired, components with solder lugs and wire-wrapping

terminals can be installed in the same assembly.

WIRE-WRAPPING TERMINAL DESIGN

Jack springs with integral wire-wrapping terminals are made of

special copper alloy for maximum work-life with excellent

resistance to corrosion. Shank of terminal accommodates a

maximum of three wire connections. Tini-Telephone®phone

jacks, lamp jacks and switches with wire-wrapping terminals

have slightly higher stack due to greater spacing required for

wrapping tool access. Actuator springs and ground lug

terminals are .704" long by .060" wide.

WIRE-WRAPPING TERMINATIONS WIRE-WRAPPING CONNECTIONS

Use the char t below as a guide to recommended tools to

be used with varying ter minal thickness and wire gauges.

Recommended Wire-Wrapping Tool

Terminal (Gardner-Denver Co. Part Numbers)

Thickness Wire Use with 14B1-A Wrapping Tool

(Inches) Gauge Wrapping Bit Sleeve

.020 thru .032 22 & 24 500131 18840

.016 24 500131 18840

.016 thru .032 26 37006 17611-2

JACK SCHEMATICS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LONG FRAME TELEPHONE JACKS

JACK MATERIALS

The complete Switchcraft line of standard size panels,

jacks , plugs , s witches and accessories are rugged, premium

quality devices...hand-crafted by experts...100% inspected...

and carefully adjusted to meet the traditionally high quality

demands of the telephone industr y and the military. Tightly

controlled incoming inspection, manufacturing methods,

and QC procedures assure you of long-lif e, reliable components .

Typical applications where Switchcraft components have

been specified for more than five decades are: telephone

central office equipment, switchboards, jackfields, test

and patch panels, and station equipment; TV and radio

broadcasting consoles; PA and communication consoles;

telegraph systems and apparatus; multichannel video and

audio patching; and data processing equipment, such as

computers, telemetry, I/O devices and facsimile.

FRAMES – Jack frames are heavy steel, formed and

press welded for added strength. Side member adds to

frame rigidity and resistance to shock and vibration. Both

“A” and “C” type frames can be supplied. (See next page.)

SPRINGS – A special copper alloy is used for leaf springs

because it offers excellent mechanical and electrical

characteristics, and good corrosion resistance. The spring

alloy has special hardness and ductility, and springs are

produced from custom-designed dies. Although normally

adjusted to mate with telephone (and MIL-type) plugs, springs

can be adjusted to mate with commercial phone plugs.

BUSHINGS – Bushings are copper alloy (except insulated

jacks), drilled to accept either a standard (.250" diameter

finger) plug or a popular smaller (.206" diameter finger)

plug. Series M Hi-D Jax®ha ve a threaded brass b ushing, or a

molded ther moplastic bushing for insulated mounting.

CONTACTS – Jack design includes “wiping” action of

contacts for low resistance connections. The contacts

supplied depend on the jack selected. Gold or silver plating is

normally offered as an option on tip , ring and/or sleev e springs.

Several precious metals and shapes are used on jacks.

SOLDER LUGS TERMINALS – Lugs project out directly

from rear of jack and are solder-coated for easy wiring and

soldering. Offset lugs can be supplied on special order (except

standard on MT-Jax®). Jacks with offset ground lugs are

particularly suitable for bussing connections on jack

panels. Contact Switchcraft for special order lug requirements.

WIRE-WRAPPING TERMINALS – Wire-wrapping

eliminates the need for soldering. Each terminal accepts up to

three wrapped wires (22 or 24 gauge, 5 wraps each), applied

with standard wire-wrapping tools. Terminal base has

standoff shoulder which prevents first wrapped wire from

accidentally sliding down and shorting against another

terminal or adjacent spring. Terminal tips are radiused to facilitate

positioning of wire-wrapping tool over terminals.See page 80 for

wire-wrapping data.

PRINTED CIRCUIT TERMINALS – Components can be

supplied with printed circuit terminals on special order . Terminals

can be specified in various lengths to accommodate different

thicknesses of single and double sided boards, as well as

multilayers, and flat flexible cable and circuitry.

OTHER TERMINALS – Many other special terminal styles are

possible. For example, where mounting permits, jacks can be

supplied with stacks having right-angle terminals. Contact

Switchcraft for special ter minals.

CUSTOM COMPONENTS

Only the most popular types of jacks are listed.

1/4" LONG FRAME TELEPHONE JACKS

STRAIGHT

SOLDER LUGS OFFSET

SOLDER LUGS

WIRE-WRAPPING

TERMINALS

PRINTED CIRCUIT

TERMINALS

(SPECIAL)

Material Shape Description

Palladium Welded Best overall combination of life,

Crossbar current carrying, and resistance

to environment. Also known as

WEco #2.

Fine silver Riveted, Carries higher current than

button-type palladium.

Gold alloy Welded Recommended for dry circuit

Crossbar switching. Excellent resistance to

corrosion and contamination.

Also known as WEco #1.

Fine silver Riveted, Heavy currents.

(Large) button-type

Gold or Plating For lower contact resistance

Silver (used on through circuit springs).

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LONG FRAME TELEPHONE JACKS

MT-Jax®

(“A” Frame)

WMT-Jax®,Number

WMT-332B YMT-Jax®,Number

YMT-332B

Ground Lug “Toward”

Frame (Y Offset)

Buss Wire

Between

Rows

Ground Lug

“Toward” Frame Ground Lug “Away”

from Frame (X Offset)

Buss Wire

Outside of

Rows

Long frame jacks are designed especially for high quality

communication equipment, and to meet exacting MIL

specifications, as well as telephone and communication systems.

Many jac ks ha v e WEco equiv alent types .MT-Jax®phone jacks are

off ered in four styles:MT-Jax®, WMT-Jax®, XMT-Jax®and YMT -Jax®.

Rugged steel frames are produced in specially designed dies,

press welded to provide rigidity and dimensional stability required

by telephone and communication jack panels - and to meet MIL

frame strength tests.“A” and “C” frame styles are available.

TERMINALS – Solder Lug: All MT-Jax®have solder lug termi-

nals.Wire-Wrapping Terminals:WMT-Jax®have wire-wrapping ter-

minals.Offset Ground Lugs: XMT-Jax®and YMT-Jax®have ground

lugs, which simplify production line wiring time. A single row of

jacks can be installed with a single buss wire connected to all

ground lugs in a row, or when double rows are mounted on .625"

vertical centers with lugs oriented between rows, holes in ground

lugs line up so a single buss wire provides connections for both

rows.XMT-Jax®hav e ground lugs oriented aw a y and YMT-Jax®are

oriented toward jack frame.See illustration.

MIL STANDARDIZATION – MIL jack types listed have been

adjusted for use with plugs specified in Amendment No.1, MIL-P-642,

usually M642/1-1, M642/1-2, M642/2-1, M642/2-2, M642/4-1 or

M642/4-2. When applicable, specify the plug you will use; we will

adjust with that plug where the item is not a MIL-type. NOTE:

Details of Typical Buss Wiring of Jacks

with Offset Ground Lugs

MT-Jax®jacks Numbers ◊MT-342B and ◊MT-344B have

shorter bushings, 0.5" long with a hold inside diameter of

.21". They will mate with MIL plug M642/5-1 or M642/8-1.

M642/5-1 plug (Switchcraft 480) cannot be used with

◊MT-342B or ◊MT-344B if these jacks are mounted on standard

.625" thick panels. The short jack bushings are recessed

.125", and the M642/5-1 is too wide to fit in the panel recess.

Use plug M642/8-1 (Switchcraft 484) with a narrower

diameter to fit in the recess and mate properly.

CONTACTS – Contacts on shuts and isolated switching

circuits are welded crossbar palladium. Welded crossbar gold

alloy contacts (WEco #1) are available on special order for dr y

circuit applications.

SPECIFICATIONS

Frame and Stack Screws: Plated steel, with iridescent

iridite finish.

Springs: Copper allo y, spring tempered. Solder lugs are tinned.

Bushings: Plated copper allo y standard.Natural brass finish

optional.

Insulation: Rigid plastic spacers (MIL-type PBE-P per

Specification LP-513). One piece molded through stack.

Contacts: Welded crossbar palladium contacts in shunt and

isolated switching circuits are standard. Gold alloy (WEco #1)

and fine silver are available on special order.

MECHANICAL

Life: Commercial jac ks:10,000 insertion/withdrawal cycles , minimum.

Military Jac ks:20,000 insertion/withdrawal cycles , minim um.

Mechanical Shock: Military Jacks – Per MIL-STD-202,

method 213, Test Condition H (75g).

Vibration: Military Jac ks – P er MIL-STD-202, method 213, (10-55 Hz).

ELECTRICAL

Contact Resistance: Commercial Jacks – .030 ohms

maximum (initial), .050 ohms maximum (after humidity, durability

exposure). Military Jacks – .010 ohms maximum (initial), .020

ohms maximum (after lif e), .10 ohms maximum (after salt spray).

Insulation Resistance: Commercial Jacks – 10,000 MΩ

minimum (initial), 1,000 MΩminimum (after humidity). Military

Jacks – 10,000 MΩminimum (initial), 1,000 MΩminimum (after

humidity, durability exposure).

Dielectric Withstanding V oltage: 500 V, 60 Hz (rms) AC.

ENVIRONMENTAL

Thermal Range: Commercial Jacks – -55°C to +85°C

(non-operating); -20°C to +65°C (operating). Military Jacks -

-55°C to +85°C (non operating); -40°C to +65°C (operating).

Thermal Shock: Commercial Jacks – Per MIL-STD-202,

method 107. Military Jacks – Per MIL-STD-202, method 107.

Humidity: Commercial Jacks – Per MIL-STD-202, method

106. Military Jacks – 0% to 95% operating and non-operating.

Salt Spray: Commercial Jacks – Per MIL-STD-202, method

101.Military Jacks – Per MIL-STD-202, method 101 (48 hours).

Moisture Resistance: Military Jacks – Per MIL-STD-202,

method 106 (240 hours).

ORDERING – Order jacks by part number. Additional variations

in jacks are available on special order. Special circuitry, frames,

contacts, natural br ass b ushings , as other terminals are av ailab le .

XMT-Jax®,Number

XMT-332A

MT-Jax®

(“C” Frame)

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

Sche- Dim. “X”

Switchcraft WEco MIL matic maximum Mating

Part Number Equiv. Type1 Circuit* Inch (mm) Plug3

2-CONDUCTOR 2

MT331 233A,

221E3 M641/2-8 I .438 (11.1)

◊CMT331 223C – I .438 (11.1)

◊WMT331 223AM – I .438 (11.1)

◊WCMT331 223CM – I .438 (11.1)

◊MT332 232A,

544A4 – II .5 (12.7)

◊CMT332 232C – II .5 (12.7)

MT332A 218A M641/2-3 III .5 (12.7)

◊CMT332A 218C – III .5 (12.7)

◊MT332C 303A M641/2-1 XVIII .562 (14.3)

MT333 215A M641/2-6 V .469 (11.9)

◊CMT333 215C – V .469 (11.9)

◊MT333E 237A – IX .625 (15.9)

◊CMT333A 237C – IX .625 (15.9)

MT334A 225A,

234A – XI .562 (14.3)

◊CMT334A 225C,

234C – XI .562 (14.3)

MT334C 216A M641/2-5 XVII .625 (15.9)

◊CMT334C 216C,

484C5 – XVII .625 (15.9)

MT334E 217A M641/2-7 XXV .562 (14.3)

◊CMT334E 217C – XXV .562 (14.3)

◊MT334F 226A M641/2-4 XIX .562 (14.3)

◊CMT334F 226C – XIX .562 (14.3)

◊MT335 236A – XIII .562 (14.3)

◊CMT335 236C – XIII .562 (14.3)

◊MT336E10 438A – XXIII .75 (19.0)

CMT336E 438C M641/1-2 XXIII .75 (19.0)

◊MT33710 411A M641/2-9 XXIV .75 (19.0)

◊CMT337 411C M641/1-1 XXIV .75 (19.0)

◊CMT351C 394C – XXXIII .812 (20.6)

◊MT352A 218J – III .5 (12.7)

◊CMT354F 361C – XXXIV .75 (19.0)

MT-JAX®(with WEco Equivalent Jacks)2

1/4" LONG FRAME TELEPHONE JACKS

Sche- Dim. “X”

Switchcraft WEco MIL matic maximum Mating

Part Number Equiv. Type1Circuit* Inch (mm) Plug3

3-CONDUCTOR

MT332B 238A M641/3-1 IV .562 (14.3)

◊CMT332B 238C – IV .562 (14.3)

WMT332B 238AM – IV .562(14.3)

◊WCMT332B 238CM – IV .562 (14.3)

MT333B 300A – VII .562 (14.3)

◊MT334B 239A M641/3-2 XII .562 (14.3)

◊CMT334-B 239C – XII .562 (14.3)

WMT334B 239AM – XII .578 (14.7)

◊WCMT334B 239CM – XII .578 (14.7)

◊MT336 241A M641/3-4 XX .562 (14.3)

◊CMT336 241C – XX .562 (14.3)

◊WMT33610 241AM – XX .625 (15.9)

◊WCMT336 241CM – XX .625 (15.9)

◊MT336A10 242A M641/5-5 XIV .688 (17.5)

◊CMT336A 242C – XIV .688 17.5)

◊WMT336A 242AM – XIV .75 (19.0)

◊WCMT336A 242CM – XIV .75 (19.0)

◊MT336B10 285A M641/3-6 XXI .812 (20.6)

◊CMT336B 285C – XXI .812 (20.6)

MT336C10 240A M641/3-3 XXII .688 (17.5)

◊CMT336C 240C – XXII .688 (17.5)

◊WMT336C10 240AM – XXII .75 (19.0)

◊WCMT336C 240CM – XXII .75 (19.0)

◊MT336D10 280A – XXXI .75 (19.0)

◊CMT336D 280C – XXXI .75 (19.0)

◊WMT336D10 280AM – XXXI .938 (23.8)

◊WCMT336D 280CM – XXXI .938 (23.8)

◊MT338 267A – XXXII .562 (14.3)

◊CMT338 267C – XXXII .562 (14.3)

◊MT33910 284A6 M641/3-7 XXVII .967 (24.6)

◊CMT339 384C6 – XXVII .967 (24.6)

◊MT342B 246A – IV .563 (14.3) M642/5-1

*Refer to page 79 and 80 for schematics.

◊Special order only; contact Switchcraft.

1. Many jacks are offered with MIL specifications. Other jacks are made of

MIL-spec materials but do not have MIL approval because no MIL type

numbers have been assigned.

2. MT-Jax have nickel-plated copper alloy bushing.WEco equivalent jacks

have plain copper alloy bushings (except WEco Number 221E, which

has nickel-plated copper alloy bushing).

3. Mating plugs and patch cords are contained in the catalog.

4. Adjust non-shor t tip-ring.

5. Adjusted for plug M642/1-1 or M642/1-2.

6. Actuates differently (insulated “A” off r ing instead of tip).

7. Same as MIL type M641/2-3 except with offset ground lug.

8. Same as MIL type M641/3-1 except with offset ground lug.

9. Same as MIL type M641/3-2 except with offset ground lug.

10.When mounted on “A” frames, stacks are too high to fit in standard

panels with .625" horizontal space add prefix “C” to par t number

to order jacks with “C” frame.

M642/4-1

M642/4-2

M642/4-3

M642/2-1

M642/2-2

Sche- Dim. “X”

Switchcraft WEco MIL matic maximum Mating

Part Number Equiv. Type1Circuit* Inch (mm) Plug3

3-CONDUCTOR 2

◊WMT342B 246 AM – IV .562 (14.3)

MT344B 248A – XII .625 (15.9)

◊MT346 249A – XX .562 (14.3)

◊CMT346 249C – XX .562 (14.3)

◊MT354B 248E – XII .625 (15.9)

◊MT35510 243C – XXXV .812 (20.6)10

◊MT356C10 245A – XXXVI .938 (23.8)10

◊CMT356C 245C – XXXVI .938 (23.8)

◊MT35710 363A – XXXVII .75 (19.0)10

◊CMT358 290C – XXXVIII .875 (22.2)

◊CMT359 326C – XXXIX .75 (19.0)

M642/5-1

M642/2-2

MT-JAX (WITH WECO EQUIVALENT JACKS)2

M642/5-1

LONG FRAME TELEPHONE JACKS

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LONG FRAME TELEPHONE JACKS

MT-JAX®

(Industry Standard – No WEco Equivalent)

MT-JAX®

(Industry Standard – No WEco Equivalent)

MT-Jax®and WMT-Jax®

MT-Jax®,Wire-Wrapping Detail

MT-Jax®,Offset Lugs

*Refer to pages 79 and 80.

◊Special order only; contact Switchcraft.

1. Many jacks are offered with MIL specifications. Other jacks

are made of MIL-spec materials but do not have MIL approval

because no MIL type numbers have been assigned.

2. MT-Jax have nickel plated copper alloy bushing.WEco equiv. jacks

have plain copper alloy bushings (except WEco No.221E, which has

nickel plated copper alloy bushing).

3. Mating plugs and patch cords are contained in this catalog.

7. Same as MIL type M641/2-3 except with offset ground lug.

8. Same as MIL type M641/3-1 except with offset ground lug.

9. Same as MIL type M641/3-2 except with offset ground lug.

10. When mounted on “A” frames, stacks are too high to fit in standard

panes with .625" horizontal space add prefix “C” to par t number

to order jacks with “C” frame.

Dim.“X”

Switchcraft MIL Schematic maximum Mating

Part N u mber Type1Circuit* Inch (mm) Plug3

2-CONDUCTOR2

◊WMT332A –III .5 (12.7)

◊WCMT332A –III .5 (12.7)

XMT332A –III .5 (12.7)

◊YMT332A –III .5 (12.7)

◊CMT332C –XVIII .562 (14.3)

◊WMT332C –XVIII .5 (12.7)

◊WMT333 –V .469 (11.9)

◊WCMT333 –V .469 (11.9)

◊MT333A –VI.967 (24.6)

◊WMT333E –IX.625 (15.9)

◊WMT334A –XI.562 (14.3)

◊WMT334C –XVII .562 (14.3)

◊WMT334E –XXV .562 (14.3)

◊WMT334F –XIX .641 (16.3)

◊WMT33510 –XIII .688 (17.5)

◊WCMT335 –XIII .688 (17.5)

MT335A10 M641/2-2 XXVI .75 (19.0)

◊CMT335A –XXVI .75 (19.0)

◊WMT335A –XXVI .75 (19.0)

◊WCMT335A –XXVI .75 (19.0)

◊WMT336E10 –XXIII .875 (22.2)

◊WCMT336E –XXIII .875 (22.2)

◊CMT341 –I .438 (11.1)

M642/4-1

M642/4-2

M642/4-3

Dim.“X”

Switchcraft MIL Schematic maximum Mating

Part N u mber Type1Circuit* Inch (mm) Plug3

3-CONDUCTOR2

XMT332B –IV .562 (14.3)

◊YMT332B –IV .562 (14.3)

◊CMT333B –VII .562 (14.3)

◊WMT333B –VII .562 (14.3)

XMT334B –XII .562 (14.3)

◊YMT334B10 –XII .562 (14.3)

◊WMT336B –XXI .812 (20.6)

◊WCMT336B –XXI .812 (20.6)

◊MT343B –VII .5 (12.7)

◊CMT342B –IV .562 (14.3)

◊CMT344B –XII .625 (15.9)

◊WMT344B –XII .625 (15.9)

◊MT346A10 –XIV .688 (17.5)

◊MT346B10 –XXI .812 (20.6)

◊MT346C10 –XXII .688 (17.5)

◊CMT346C –XXII .688 (17.5)

M642/2-1

M642/2-2

M642/5-1

M642/2-21

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LONG FRAME TELEPHONE TWIN JACKS

High quality telephone jacks are essentially doub led versions

of MT-Jax®.Twin-Jax®are used in Switchcraft Series 2400,

2600 and JP®Jack Panels and other standard jack panels.

Twin-Jax®have direct WEco equivalents.

MT388 AND WMT388

Frame mounting ears are on 1.375" centers, and bushings

are on .625" centers.Jac ks are double, 2-conductor type with

a crossover wiring feature. If a mating plug is inserted in

either bushing, crossover contacts are opened (see

schematic). MT388 (solder lugs) is equivalent to WEco jack

410A, 410C and 410D.WMT388 (wire-wrapping) is equivalent

to WEco 410AM.

MT389 AND WMT389

Double, 3-conductor jacks with both the tip and ring circuits

interconnected (crossover wired) so if a plug is inserted in

either jack, common circuits are opened (see schematic).

MT-389 (solder lugs) is equivalent to WEco 482A. WMT389

(wire-wrapping) is equivalent to WEco 482AM and 482BM.

SPECIFICATIONS

Frame and Stack Screws: Steel, plated with ir idescent

iridite finish.

Springs: Copper alloy, spring tempered. Solder lugs are

solder coated.

Bushings: Nickel-plated copper alloy.

Contacts: Welded crossbar palladium in shunt circuits.

Insulation: Rigid plastic (MIL-type PBE-P, per MIL

Specification LP-513C). Extruded plastic insulating tubing

through stack.

ORDERING

Order by part number from table.

1/4" LONG FRAME TELEPHONE TWIN JACKS

Part Dim. “X” max.

Number1Adjusted for Plug Inch (mm)

MT388 WEco types 298B and 347B .562 (14.3)

MIL types M642/9-1 and M642/1-1

◊WMT388 Switchcraft types 411, 412, 413, 420 .562 (14.3)

MT389 WEco type 310 .594 (15.1)

MIL types M642/2-1 and M642/2-2

WMT389 Switchcraft types 414 and 482 .562 (14.3)

◊Special Order only; contact Switchcraft.

1. Number MT388 is equivalent to MIL-type M641/11-1

2. Complete data for telephone and MIL-type plugs are contained in this section.

Mounting Screws: #6-32, Part Number P10725, can be ordered separately.

Contact Switchcraft. (Screws not supplied with jacks).

SCHEMATIC CIRCUITS

MT388 and

WMT388 MT389 and WMT389

MT388 and WMT388 MT389 and WMT389

MT389

WMT389

MT388

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

JACK BLOCKS

Dual-Jax Blocks are ideal where limited jack connections are

needed but larger jack panels are not required. Designed for

broadcasting, intercom and PA systems, switchboards, and

commercial, industrial and military communications equipment.

Dual-Jax Blocks mount in panels or chassis, either singularly

or in multiples. Four countersunk holes accommodate four

#8-32 screws (not supplied) f or b lock mounting.Blocks can be

supplied without jacks, or with MT-Jax®installed. Many other

jacks including, T-Jax®, T-Switch®switches and lamp jac ks can

be installed. Jacks with wire-wrapping terminals or offset lugs

can also be supplied. By drilling additional holes, Twin-Jax®

ma y also be used.Contact Switchcraft f or any special order items.

SPECIFICATIONS

Block: Molded black thermoplastic.

Screws: #6-20 plated steel, QQ-P-416, Type II,

Class 2 (for jack mounting).

ORDERING

Order by part number from table.

Part Number Description

2300 Block, without jacks.

2331 Two, MT331 MT-Jax installed.

2332A Two, MT332A MT-Jax installed.

2332B Two, MT332B MT-Jax installed.

◊2333 Two, MT333 MT-Jax installed.

1/4" JACK BLOCKS

◊Special order only; contact Switchcraft for price and delivery.

Mounting Screws: #6-20, P1544, can be ordered separately,

contact Switchcraft.

DUAL-JAX BLOCK®

SERIES 2300

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

BANTAM TYPE JACKS

FEATURES

• Steel (standard) or die-cast frames (special order).

• 2-or 3-conductors.

• Palladium crossbar welded contacts are standard in

switching circuits. Fine silver or gold alloy contacts are

available on special order.

• Series TT30, TT30FM and TT600 - solder lugs; Series

WTT-30, WTT30FM and WTT600FM -wire-wrapping terminals.

Bussing solder lugs are available on special order.

• Series TT30 and WTT30 jacks mounts in Series 1600,

A1600, B1600 and C1600 jacks panels.

• Series TT30FM and WTT30FM jacks mount in Series

TT51, TT52, TT55 and TT56 jack panels.

• Series TT600 and WTT600 jacks mount in .25" diameter

holes in panels up to .281" thick. Mounting centers: .438".

• Add “N” for nickel-plated frame and “Y” or for offset solder lugs.

SWITCHCRAFT VS. MIL NUMBERS

TT-JAX®(.173") TELEPHONE JACKS BANTAM TYPE®

Jack Number MIL Spec. Number

TT32B 641/19-2

TT32BFM 641/19-6

TT34B 641/19-4

TT34BFM 641/19-8

TT36C 641/19-10

WTT32B 641/19-1

WTT32BFM 641/19-5

WTT34B 641/19-3

WTT34BFM 641/19-7

WTT36C 641/19-9

Part Numbers, Jack with Wire Wrapping Terminals Dim.“X” Typical

Series WTT30 Series WTT30FM Series WTT600 Max. Mating

Steel Die Cast Steel Die Cast Steel Schem.1In (mm)2Cond. Plug3

WTT31 ◊WTT31DC WTT31FM ◊WTT31FMDC WTT631 I.422 (10.7) 2 TT251

WTT32A ◊WTT32ADC WTT32AFM ◊WTT32AFMDC WTT632A III .406 (10.3) 2 TT251

WTT32B ◊WTT32BDC WTT32BFM ◊WTT32BFMDC WTT632B IV .578 (14.68) 3 TT253

◊WTT32C ◊WTT32CDC ◊WTT32CFM ◊WTT32CFMDC ◊WTT632C XVIII .422 (10.7) 2 TT251

WTT33 ◊WTT33DC WTT33FM ◊WTT33FMDC ◊WTT633 V.578 (14.7) 2 TT251

◊WTT33B ◊WTT33BDC ◊WTT33BFM ◊WTT33BFMDC ◊WTT633B VII .484 (12.3) 3 TT253

◊WTT34A ◊WTT34ADC ◊WTT34AFM ◊WTT34AFMDC ◊WTT634A XI .547 (13.9) 2 TT251

WTT34B ◊WTT34BDC WTT34BFM ◊WTT34BFMDC WTT634B XII .578 (14.68) 3 TT253

–– – –◊WTT634C XVII .547 (13.9) 2 TT251

◊WTT35 ◊WTT35DC ◊WTT35FM ◊WTT35FMDC ◊WTT635 XIII .609 (15.5) 2 TT251

◊WTT36 ◊WTT36DC ◊WTT36FM ◊WTT36FMDC ◊WTT636 XX .609 (15.5) 3 TT253

◊WTT36A ◊WTT36ADC ◊WTT36AFM ◊WTT36AFMDC ◊WTT636A XIV .625 (15.9) 3 TT253

WTT36C ◊WTT36CDC WTT36CFM ◊WTT36CFMDC ◊WTT636C XXII .625 (15.9) 3 TT253

◊Special order only.

1. See schematic diagrams.

2. “X” dimension of die cast frame jacks may be slightly greater.

3. See Mating Plugs Section.

TT36

STEEL FRAME TT32BDC

DIE-CAST FRAME TT36FM

FRONT MOUNT WTT636C

THREADED BUSHING

(special order only)

Part Numbers, Jack with Solder Lugs Dim.“X” Typical

Series TT30 Series TT30FM Series TT600 Max. Mating

Steel Die Cast Steel Die Cast Steel Schem.1In (mm)2Cond. Plug3

TT31 ◊TT31DC TT31FM ◊TT31FMDC TT631 I.422 (10.7) 2 TT251

TT32A ◊TT32ADC TT32AFM ◊TT32AFMDC TT632A III .406 (10.3) 2 TT251

TT32B ◊TT32BDC TT32BFM ◊TT32BFMDC ◊TT632B IV

.578 (14.68)

3TT253

TT32C ◊TT32CDC ◊TT32CFM ◊TT32CFMDC ◊TT632C XVIII .422 (10.7) 2 TT251

TT33 ◊TT33DC TT33FM ◊TT33FMDC ◊TT633 V.578 (14.7) 2 TT251

◊TT33B ◊TT33BDC ◊TT33BFM ◊TT33BFMDC ◊TT633B VII .484 (12.3) 3 TT253

TT34A ◊TT34ADC ◊TT34AFM ◊TT34AFMDC ◊TT634A XI .547 (13.9) 2 TT251

TT34B ◊TT34BDC TT34BFM ◊TT34BFMDC TT634B XII

.578 (14.68)

3TT253

TT34C ◊TT34CDC TT34CFM ◊TT34CFMDC ◊TT634C XVII .547 (13.9) 2 TT251

TT34F ◊TT34FDC – – – XIX .609 (15.5) 2 TT251

TT35 ◊TT35DC ◊TT35FM ◊TT35FMDC ◊TT635 XIII .609 (15.5) 2 TT251

TT36 ◊TT36DC ◊TT36FM ◊TT36FMDC ◊TT636 XX .609 (15.5) 3 TT253

TT36A ◊TT36ADC TT36AFM ◊TT36AFMDC TT636A XIV .625 (15.9) 3 TT253

TT36B ◊TT36BDC – – – XXI .703 (17.9) 3 TT253

TT36C ◊TT36CDC TT36CFM ◊TT36CFMDC ◊TT636C XXII .625 (15.9) 3 TT253

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

BANTAM TYPE JACKS

SPECIFICATIONS

Frame: Plated (steel or zinc diecast).

Stack Screws: Steel plated.

Bushing: Plated (brass or steel).

Tip and Ring Springs: Copper alloy.

Contact Spring: Copper alloy.

Contacts: Welded crossbar palladium. Other alloys in

various sizes available on special order.

Insulation: Rigid plastic with plastic tubing through

stack assembly.

MOUNTING HARDWARE

Series TT30: #3-48 x 1/4"; mounting screws, P10834,

can be ordered separately.

Series TT30FM: Supplied with one #3-48 x 1⁄4" fil.

head machine screw, steel-plated.

Series TT600: Supplied with one P1975, nickel-plated cop-

per alloy locknut, and one S3997, steel, nickel-plated wash-

er.

NOTE: Dimensional drawings show panels with steel frame

jacks. Overall dimensions for steel or die-cast frame jacks

are the same, except as noted.

Series TT32B

TT-JAX®(.173") TELEPHONE JACKS BANTAM TYPE®

B0.115

[2.9]

REF

B0.176

[4.46]

REF

B0.251

[6.4]

REF

0.250

[6.4]

REF

0.279

[7.1]

REF

0.281

[7.1]

REF

0.650

[16.51]

REF

0.035

[.79]

REF

0.375

[9.5]

REF

2-17/32

[64.3]

REF

0.590 5.015

[14.9]

REF

0.780 5.015

[19.8]

REF

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

FEATURES

• Steel or die-cast frames. (Special order only).

• Twin, 3-conductor jacks on .312" centers, inter-connected

so circuit is opened when a mating plug is inser ted in one

side of the jack. Palladium welded crossbar contacts are

standard in switching circuits.

• Solder lugs or wire-wrapping terminals.

• TT89, TT89C, WTT89 and WTT89DC jacks mount in

Series 1700 jack panels.

• TT89FM, TT89FMDC, WTT89FM and WTT89FMDC

jacks mount in Series TT59, TT60, TT61 and TT62

jack panels.

SPECIFICATIONS

Frame: Plated (steel or diecast zinc).

Stack Screws: Steel-plated.

Bushing: Plated (steel or copper alloy).

Tip, Ring and Contact Springs: Copper alloy.

Contacts: Welded crossbar palladium. Other alloys in

various sizes available on special order.

Insulation: Rigid plastic with plastic tubing through

stack assembly.

Mounting Hardware: #3-48 x 1/4" mounting

screws, P10834, can be ordered separately for TT89,

TT89DC, WTT89 and WTT89DC jacks.Two mounting

screws, P25424, are supplied with TT89FM, TT89MDC,

WTTFM and WTT89FMDC jacks.

NOTE: Dimensional drawings show panels with steel

frame jacks. Overall dimensions for steel or die-cast

frame jacks are the same.

TT-JAX®(.173") TELEPHONE TWIN JACKS BANTAM TYPE®

Solder Lugs Wire-Wrapping Terminals Typical Mating

Steel Die Cast Steel Die Cast Conductors Plug1

TT89

◊

TT89DC WTT89

◊

WTT89DC TT263

TT89FM

◊

TT89FMDC WTT89FM

◊

WTT89FMDC TT263

1. See Mating Plugs Section.

◊Special order only

TT89

SCHEMATIC

Twin

3-conductor

BANTAM TYPE JACKS

* Please visit the product pages on our website for the most up-to-date product information

TT95 TT95FM TT96FM

TT95DC TT95FMDC TT96FMDC

WTT95 WTT95FM WTT96FM

WTT95DC WTT95FMDC WTT96FMDC

TT253 TT263

JACKS AND PLUGS

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

BANTAM TYPE JACKS

TT95 SCHEMATIC

FEATURES

• Steel or die-cast frames.

• TT95 T ri-Jax®Jacks: three, 3-conductor jacks on one

frame.Twin jacks, (on .312" centers, LINE & EQUIPMENT

functions), have strapped shunts installed.The third jack

(MONITOR) is unwired. See TT95 schematic.

• TT96 T ri-Jax Jacks: Same as TT95 jacks, except third

jack (MONITOR) has tip and r ing springs, respectively,

jumpered to tip and ring spr ings of top (LINE) jack.

• Selection of solder lugs or wire-wrapping terminals.

• Palladium welded crossbar contact are standard in

switching circuits.

• TT95, TT95DC, WTT95 and WTT95DC jacks mount in

Series B1700 jack panels.

• TT95FM, TT95FMDC , TT96FM, TT96FMDC and

wire-wrapping versions mount in Series TT53, TT54,

TT57 and TT58 jack panels.

TT-JAX®(.173") TELEPHONE TRIPLE JACKS BANTAM TYPE®

SPECIFICATIONS

Frame: Plated (steel or diecast)

Stack Screws: Stainless Steel Plated.

Bushings: Plated (steel or copper alloy).

Contact Springs: Copper alloy.

Contacts: Welded crossbar palladium. Other precious metal

alloys in various sizes available on special order.

Mounting Hardware: #3-48 x 1/4" mounting screws,

P10834, can be ordered separately for rear mount jacks.

Two mounting screws, P25424, are supplied with front

mount jacks.

◊Special order only

TT96 SCHEMATIC

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MINIATURE TELEPHONE JACKS

Right-angle miniature phone jacks provide low-profile

packaging. Single and twin 3-conductor jacks provide

plug-jack access to communication circuits for patching

and/or testing. Tips and rings are shunted. These jacks

mate with Switchcraft miniature TT®plugs and patch cords.

Jacks are designed for right-angle mounting on .062"

(1.6 mm) maximum thic kness PC boards .Snap-on cov ers in

colors are available and can be installed or removed in the

field without special tools. Covers and jacks may be

ordered in different colors for color coded circuits.

SPECIFICATIONS

ELECTRICAL

Dielectric Withstanding Voltage: 500 V AC

Contact Resistance: .020 Ωmaximum (initial),

.030 Ωmaximum (after life test).

Insulation Resistance: 1010 Ωat 500 V DC (initial).

MECHANICAL

Shock: MIL-STD 202 Method 213.

Vibration: MIL-STD 202 Method 201.

Insertion Force: 7 pounds maximum (31.14 N).

Withdrawal Force: 1.5 pounds minimum (6.67 N).

Life: 10,000 cycles.

MATERIALS

Housing: Thermoplastic UL 94V-0.

Springs: Copper alloy, plated.

Contacts: Gold alloy (WEco #1) crossbar.

ENVIRONMENTAL

Temperature Limits: -55°C to +85°C

(non-operating).

Thermal Shock: MIL-STD 202 Method 107.

Salt Spray: MIL-STD 202 Method 101.

Humidity: MIL-STD 202 Method 106, less

steps 7A and 7B.

MINIATURE TELEPHONE JACKS, RIGHT ANGLE, PC MOUNT

1. See schematic diagrams on pages 79 and 80.

2. See Mating Plugs Section.

◊Special order only; contact Switchcraft for price and delivery.

LOW SILHOUETTE

PERMITS CRITICAL

SPACE-SAVING HIGH

DENSITY PACKAGING

ORDERING

1. Order jacks and covers separately from table.

2. Covers can be ordered assembled on special order.

3.To order RTT jack with cover installed, add the letter C

after RTT in par t number. Special order only.

4.To order RTT jack with Snap-in terminals, add the

letter S to the end of the par t number. Special order only.

5. For all special orders items, contact Switchcraft.

RTT8702

COVER P286402

RTT34B02

COVER P286302

CLOSE-UP OF

“Snap-In”

TERMINAL

ORDERING INFORMATION

RTT JACK PART NUMBERING SYSTEM

Jack Cover Typical

Part No. Part No. Color Schem. Cond. Mating Plug2

RTT34B01 ◊P286301 Red

RTT34B02 P286302 Black

RTT34B04 ◊P286304 Blue

RTT34B05 P286305 White XII 3 TT-253

◊RTT34B07 ◊P286307 Orange

◊RTT34B08 ◊P286308 Yellow

RTT8701 ◊P286401 Red

RTT8702 P286402 Black

RTT8704 ◊P286404 Blue Twin Twin

RTT8705 P286405 White XII 3 TT-263

◊RTT8707 ◊P286407 Orange

◊RTT8708 ◊P286408 Yellow

Series Cover Option Circuitry Jack Color

RTT Right Blank- No Cover

Angle TT Jack Standard 34B- XII 01- Red

C- Cover Supplied 87- Two XII 02- Black

Circuits 04- Blue

05- White

07- Orange

08- Yellow

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MINIATURE TELEPHONE JACKS

MINIATURE TELEPHONE JACKS, RIGHT ANGLE, PC MOUNT (continued)

No. P2864 Cover

RECOMMENDED

PC BOARD LAYOUT

RECOMMENDED

PCBOARD LAYOUT

No. P2863 Cover

No. RTT34B (Less cover)

No. RTT87 (Less cover)

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

ENCLOSED JACKS

Two- and 3-conductor Unijax®jacks have advanced features

of Hi-D Jax®jacks including chassis/panel and PC mounting

and .177" bushing that mates with a variety of tini-telephone®

plugs and patchcords. Bushing diameter is .281" inside

diameter ; panel thickness is .125". Mounts in rows or arrays

on .469" centers.

SPECIFICATIONS

MECHANICAL

Insertion/Withdrawal: 2-conductor, 1.25 pounds nominal,

3 pounds maximum inser tion. 3-conductor, 1.5 pounds nominal,

3 pounds maximum insertion. 2-conductor, 3 pounds nominal,

1.5 pounds minimum withdrawal.3-conductor , 3 pound nominal,

1.5 pounds minimum withdrawal.

Life: 10,000 inser tion/withdrawal cycles minimum.

ELECTRICAL

Contact Resistance: .10 ohms maximum.

Insulation Resistance: 1,000 MΩminimum.

Dielectric Withstanding Voltage: 500 V AC maximum.

MATERIAL

Housing: Thermoplastic.

Mounting Bushing: Nickel-plated copper alloy.

Tip and Ring Springs: Copper alloy, silver-plated.

Integral contacts.

Shunt Springs: Copper alloy, silver-plated

integral contacts.

Sleeve T erminal: Steel, tin-plated.

Hardware: Supplied with one, Number P2060

nickel-plated copper alloy locknut, and one,

Number P2061 nickel-plated copper alloy washer.

.177" ENCLOSED JACKS

Part

Number

UJ1

UJ2A

Description

Open circuit

Single closed circuit

Jack

Schematic1

III

Typical

Mating

Plug2

TT251

TWO CONDUCTOR PART NUMBERS

UJ2B

UJ4B Double Open circuit

Double closed circuit IV

XII TT253

TT253

THREE CONDUCTOR PART NUMBERS

1. See jack schematics on pages 79 and 80.

2. See Mating Plugs Section.

UJ4B

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LITTEL-JAX 2- AND 3- CONDUCTOR

LITTEL-JAX®COMMERCIAL PHONE JACKS

2- AND 3-CONDUCTOR

Littel-Jax phone jacks mate with standard commercial phone

plugs and are available with .25" and .21" inside diameter

bushings.

MIL LITTEL-JAX®PHONE JACKS

2- AND 3-CONDUCTOR MIL-SPEC, MIL-J-641 (E)

MIL jacks mate with MIL-type phone plugs with .25" (6.35mm)

or .21" (5.34mm) diameter bushings .Numbers C11 and C12B

have a non-turn locating pin which keys the jack to the

mounting surface. For low contact resistance applications,

jack number C12A has fine silver contacts on shunts and

tip springs.

MOUNTING

Chassis/Panel: See Mounting Data drawing below;

smallhole is required only for jacks numbers C11 and C12B

with non-turn locating pin.

Maximum Panel Thickness: .156" (4mm) for standard

.276" (7mm) long bushing; .25" (6.35mm) for .375" (9.5mm)

long bushing.

NOTE: For panels thicker than .25" see Thick Panel Phone Jax.

Insulated Mount: See drawing. S1028 flatwasher and

Part Number S1029 shoulder washer must be ordered

separately for mounting in .437" diameter hole.

NOTE: See Hi-D Jax ®for jack specifically designed for

insulated mounting without additional washers.

PC Board Mounting: See Recommended PC Board Layout

drawing below for jacks with PC terminals. Recommended

PC board thickness is .062".

Mounting Centers: 1.188" (30mm) recommended. Centers

may vary with jack selected, for example, Number

11 mounts on .813" (20.6mm) and 14B mounts on

1.125" (28.6mm) minimum centers.

Part

Number

C11

FA11

FAL11

L11

12A

C12A

L12A

PC12A

13A

13E

Description

Open circuit

MIL Number M641/6-1

.205 inch FASTON terminal

.375 inch long bushing

.205 FASTON terminal

.375 inch long bushing

Tip shunt

MILNumber M641/12-1

.375 inch long bushing

PC board mount

Isolated “make” circuit

Transfer circuit

Isolated “break” circuit

Jack

Schematic1

III

Typical

Mating

Plug

250

440

250

440

250

1/4" PHONE JACKS

TWO CONDUCTOR PART NUMBERS

12B

L12B

C12B

13B

14B

Double open circuit

.375 inch long bushing

MIL number M641/5-1,

.250 inch inside diameter

Tip shunt

Double closed circuit

VII

XII

267

480

267

THREE CONDUCTOR PART NUMBERS

S11

S12A

S12B

S13B

2 conductor

3 conductor

III

VII

S250

S267

PART NUMBERS

(.210" INSIDE DIAMETER BUSHING)

1. Refer to jack schematics on pages 79 and 80.Other circuits are available;

contact factory.

14B PC-12A

FAL-11

.205 FASTON

TERMINAL

STEREO JACK

CONNECTIONS

PREFIX OPTIONS SERIES CIRCUITRY

Blank- 1/4" Commercial Jack 1-Littel Jax®1- I

C- Accepts Mill Plug 2A- III

FA- .205" Faston Terminals 2B- IV

FAL- .205" Faston Ter minals 3- V

and .375" Long Bushing

L- .375" Long Bushing 3A- VI

PC- PC Terminals 3B- VII

S- Accepts .206 Diameter Plugs 3E- IX

4B- XII

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LITTEL-JAX 2- AND 3- CONDUCTOR

SPECIFICATIONS

MECHANICAL

Life: Commercial Jacks: 10,000 inser tion/withdrawal

cycles, minimum. Militar y Jacks: 20,000 insertions/

withdrawals, minimum.

Mechanical Shock: Militar y Jacks: Per MIL-STD 202,

method 213, Test Condition H (75g).

Vibration: Militar y Jacks: Per MIL-STD-202,

method 213, (10-55 Hz).

Insertion/Withdrawal Forces: (see char ts below)

Sleeve T erminal: Copper alloy.

Hardware: Supplied with one Number P10001 copper alloy

nickel-plated hex nut, and one Number 51022 steel nickel-plated

washer - except copper alloy nickel-plated washer Number

S10451 supplied on C11, C12A and C12B.

*Commercial jac ks feature integral contacts .Integral contacts should

not be used where low contact resistance is a requirement.

LITTEL-JAX®COMMERCIAL PHONE JACKS - 2- AND 3-CONDUCTOR AND

MIL LITTEL-JAX®PHONE JACKS - 2- AND 3-CONDUCTOR MIL-SPEC, MIL-J-641 (E)

1/4" PHONE JACKS (continued)

COMMERCIAL JACKS

Plug Diameter (inches)

Inser tion (maximum)

Withdrawal (minimum)

.210

7 lb.

1 lb.

.250

7 lb.

1 lb.

MILITARY JACKS

Part Number

Inser tion (maximum)

Withdrawal (minimum)

Withdrawal (maximum)

C11

6 lb.

2 lb.

7 lb.

C12A

7 lb.

3 lb.

7 lb.

C12B

6 lb.

1.5 lb.

5 lb.

ELECTRICAL

Contact Resistance: Commercial Jacks - .030 ohms

maximum (initial), .050 ohms maximum (after humidity,

durability exposure). Per MIL-STD-202E. Military Jacks -

.010 ohms maximum (initial), .020 ohms maximum (after life),

.10 ohms maximum (after salt spray).

Insulation Resistance: Commercial Jacks - 10,000 MΩ

minimum (initial), 1,000 MΩminimum (after humidity).Military

Jacks - 10,000 MΩminimum (initial), 1,000 MΩminimum

(after humidity, durability exposure).

Dielectric Withstanding Voltage: 500 V, 60 Hz (r ms) AC.

Contact Rating: 1 A, 25 V DC.

ENVIRONMENTAL

Thermal Range: Commercial Jacks; -55°C to +85°C

(non-operating); -20°C to +65°C (operating). Militar y Jacks; -

55°C to +85°C (non-operating); -40°C to+65°C (operating).

Thermal Shock: Commercial Jacks - Per MIL-STD 202,

method 107. Militar y Jacks - Per MIL-STD 202, method 107.

Humidity: Commercial Jacks - Per MIL-STD 202, method

106. Military Jacks - 0% to 95% operating and non-operating.

Salt Spray: Commercial Jacks - Per MIL-STD 202, method

101. Military Jacks - Per MIL-STD 202, method 101 (48 hours).

Moisture Resistance: Militar y Jacks - Per MIL-STD 202,

method 106 (240 hours).

MATERIAL

Mounting Bushing: Nickel-plated copper alloy.

Insulation: Rigid plastic.

Springs: Special copper alloy. Integral contacts are standard

in the isolated switching circuits; fine silver contacts

in C12A switching circuit.

Littel Jax®Jacks

11, L-11, C-11, S-11 FA-11, FAL-11 12 12-A, L-12A 12A, L-12A

*.276" for No. FA-11 S-12A, SC-12A S-12A, SC-12A

PC-12A 12B, C12B 13 13A

S-12B, SC-12B

13B, S-13B 13E 14B

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

ENCLOSED JACKS

Compactly constructed jacks permit direct cross-patching

with Switchcraft, WEco and MIL-type telephone plugs and

patch cords. Ser ies M Hi-D Jax®offer a choice of solder lugs

or PC terminals. Both insulated and metal bushings can be

specified, as well as .21" inside diameter sleeves for narrow

plug fingers. Maximum contact resistance is .1 ohm. Springs

are made of a special gold-plated copper alloy.Welded cross

bar gold alloy contacts are available on special order.

SERIES M-11* HI-D JAX®

Two- and 3-conductor type mate with .25" diameter finger

plugs. Tip and ring springs are gold-plated. Shunts (if used)

have welded crossbar palladium contacts. Ring springs

(where used with shunts) have welded crossbar palladium

contacts. Tip springs (when used) do not have a contact

welded to the spring. Bushing has 3/8-32-NEF-2 thread;

locknut and flat washer for mounting are supplied.

SERIES MN-11* HI-D JAX®

Same as Series M-11* except threaded bushing is molded

thermoplastic for insulated mounting. Continuous sleeve

contact assures positive sleeve connection without exposed

metal on front of panel.

SERIES M113 AND M114 HI-D JAX®

The versatile 3-conductor M113 and M114 feature springs

which accept a wide variety of 1/4" plug designs. Self-aligning

PC terminals allow for easier insertion into a printed circuit

board. Also feature a metr ic thread mounting.

SPECIFICATIONS

MATERIALS

Mounting Bushing: Ser ies M11*, MS11* - Nickel-plated

copper alloy. Ser ies MN11*, MNS11* - Molded ther moplastic.

Housing: Molded thermoplastic, UL 94V-0.

Springs: Copper alloy.

Contacts (mil-type): Tip and Ring Springs are gold-plated.

Shuntsprings (where used) are welded crossbar palladium.

Welded crossbar gold alloy contacts are available on

special order.

Contacts (commercial): Tin-plated integral contacts.

Sleeve T erminal: Steel, tin-plated.

Hardware: Supplied with one P10001 copper alloy,

nickel-plated locknut and one S10221 steel,

nickel-plated washer.

1/4" ENCLOSED TELEPHONE JACKS

Series M11* Series MNS11* Series MS11* Series MN11*

MECHANICAL

Life: 10,000 inser tion/withdrawal cycles, minimum.

Insertion/Withdrawal Forces: Nominal plug retention on

2-conductor jack is .75 pounds with .5 pounds minimum.

Nominal plug retention on 3-conductor jack is 2 pounds with

1.5 pounds minimum. With double tips, the nominal is

1.5 pounds and 1 pound minimum.

Maximum Recommended Mounting Torque: 6" -lb. for

thermoplastic bushing.

Mounting Torque (for Spring Lock PC Terminal):

8" -pound for ther moplastic bushings.

ELECTRICAL

Contact Resistance: .020 ohms maximum (initial),

.050 ohms maximum (after humidity, durability exposure).

Per MIL-STD-202E.

Insulation Resistance: 10,000 MΩminimum (initial),

1,000 MΩminimum (after humidity).

Dielectric Withstanding Voltage: 500 V, 60 Hz (r ms) AC.

Contact Rating: 0.25, 48 VDC make and break, 3A carry only.

ENVIRONMENTAL

Thermal Range: -55°C to +85°C (non-operating);

-20°C to +65°C (operating).

Thermal Shock: Per MIL-STD 202, method 107.

Humidity: Per MIL-STD 202, method 106.

Salt Spray: Per MIL-STD 202, method 101.

* Please visit the product pages on our website for the most up-to-date product information

M111 MN111

M112A

M112APC

MN112A

MN112APC

M113E

MN113E

M112B ML112B MN112B M113B

MN113B M112BPC MN112BPC

MN113BPC M113PPC1M

MNL113B MNL112B M114B

M114BPC M114BPC1M MN114B

MN114BPC

3-CONDUCTOR

Part Part Typical

Number Number Sche- Mating

Solder Lugs PC Terms Description matic1Plug2

M112B ⋅M112BPC .25" inch I.D. sleeve,

metal bushing.

ML112B – .25" inch I.D. sleeve,

.375 inch long

metal bushing.

MN112B ⋅MN112BPC .25 inch I.D. sleeve, 482

molded thermoplastic

bushing. IV

MNL112B – .25 inch I.D. sleeve,

.375 inch long

metal bushing.

M113B – .25 inch I.D. sleeve,

metal bushing.

MN113B MN113BPC .25 inch I.D. sleeve, 482

molded thermoplastic VII

bushing.

M113BPC1M .25 inch I.D. sleeve,

molded thermoplastic 482

bushing, metric hardware

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

ENCLOSED JACKS

1/4" ENCLOSED TELEPHONE JACKS (CONTINUED)

◊Special Order only; contact Switchcraft.

*Other mating plugs are contained in this plug section.

**See pages 79 and 80.

2-CONDUCTOR

Part Part Typical

Number Number Sche- Mating

Solder Lugs PC Terms Description matic** Plug*

M111 –.25 inch I.D. sleeve,

metal bushing.

MN111 –.25 inch I.D. sleeve, I

molded thermoplastic

bushing.

◊M112A ◊M112APC .25 inch I.D. sleeve,

metal bushing.

MN112A ◊MN112APC .25 inch I.D. sleeve, III 420

molded thermoplastic

bushing.

M113E –.25 inch I.D. sleeve,

metal bushing.

MN113E –.25 inch I.D. sleeve, IX

molded thermoplastic

bushing.

ORDERING INFORMATION

Order by part number from table.

SERIES MS11* HI-D JAX®

3-conductor with .21" inside diameter slee ve.Mates with plugs

having .206" diameter finger. Protects against accidental

insertion of .25" diameter finger plugs. Gold-plated tip and

ring springs. Welded crossbar palladium contacts on shunt

springs standard. Bushing has 3/8-32-NEF-2 thread; locknut

and flat washer for mounting are supplied.

◊SERIES MNS11* HI-D JAX®

Same as Series MS11* except bushing is molded

thermoplastic.

◊TWIN M11* HI-D JAX®

Two Series M11* Hi-D Jax strapped on .625" centers. Mates

with Switchcraft®Twin Plugs. 411, 412 and 413. MIL-type

Littel-Plug®phone plugs, 420, 430 and 440 (2-conductor)

and 482 and 483 (3-conductor) are also recommended for

mating with this series.

3-CONDUCTOR

Part Part Typical

Number Number Sche- Mating

Solder Lugs PC Terms Description matic1Plug2

MNL113B – .25 inch I.D. sleeve,

.375 inch long 482

metal bushing. VIIM114B ⋅M114BPC .25 inch I.D. sleeve,

metal bushing.

M114BPC1M

.25 inch I.D. sleeve, 482

metal bushing,

metric hardware.

MN114B ⋅MN114BPC .25 inch I.D. sleeve, XII

molded thermoplastic

bushing.

480,

484

◊Special order only; contact Switchcraft for price and delivery.

1 See schematics, pages 79 and 80.

2 Number(s) specified are not necessarily the only mating plug(s).

See Plugs Section.

.25" I.D. sleeve,

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

HI-D JAX 2- AND 3-CONDUCTOR

Hi-D Jax®2- and 3-conductor enclosed phone jacks are ideal

for panel/chassis and PC board mounting. Unitized molded

housing protects springs, provides mechanical and electrical

reliability, minimizes leakage and provides low capacity

between springs. Mounts on .625" minimum centers in rows

or arrays..25" or .21" inside diameter bushing types, metal or

thermoplastic bushings (for insulated mounting). Insulated

Hi-D Jax®jacks are specifically designed for in-circuit

(insulated) mounting from mounting surface and have fully

protected enclosed internal sleeve feature. Solder lugs or

PC terminals may be selected.

MOUNTING

Jacks mount in a single .375" diameter hole on .625"

minimum centers. Series 11*, N11*, NS11* and S11* mount

in panels up to .156" thick. Series L11* and NL11* (long

bushing) mount in panels up to .25" thick. Jacks with PC

terminals mount on PC boards up to .094" thick. Formed

“shoulders” on each ter minal provide stable stand-off mount.

Threaded bushing permits mechanical connection to

equipment panel. Mounting hardware is supplied. Also

available is a grounding spur bushing, which allows for

positive grounding of the bushing to the chassis. Contact

factor y for details.

SERIES 11* - 2- and 3-conductor types, threaded metal

bushing .276" long. .25" inside diameter bushings.

SERIES L11* - Same as Ser ies 11*, except bushing is

.375" long for mounting in panels up to .25" thick.

SERIES N11* - Same as Series 11*, except bushing is

molded thermoplastic for insulated mounting.

SERIES NL11* - Same as Series N11*, except bushing is

.375" long for insulated mounting in panels up to .25" thick.

SERIES S11* - Same as Series 11*, except bushing has

.21" inside diameter. Smaller diameter protects against

accidental inser tion of plugs with .25" diameter fingers.

◊SERIES NS11* - (SPECIAL ORDER ONLY) - Same as

Series N11*, except bushing is .21" inside diameter.

113BPC1M AND 114BPC1M - Versatile, 3-conductor

113BPC1M and 114BPC1M feature springs which accept

awide variety of 1/4" plug designs.Self-aligning PC terminals

allow for easier insertion into a printed circuit board. Also

feature a metr ic thread mounting.

HI-D®JAX 2- AND 3-CONDUCTOR

1/4" ENCLOSED PHONE JACKS (continued)

Solder Lug

Part

Number

111

N111

NL111

112A

L112A

N112A

NL112A

113

N113

◊113D

113E

PC Terminals

Part Number

111PC

N111PC

112APC

◊L112APC

N112APC

113PC

◊113DPC

113EPC

Description

Open circuit

Insulated bushing

.375 " long insulated bushing

Single closed circuit

.375" long bushing

Insulated bushing

.375" long insulated bushing

Isolated "make" circuit

Insulated bushing

Transfer circuit (1-C)

Isolated "break" circuit

Jack

Schematic1

III

VI 3

Typical

Mating

Plug2

250

TWO CONDUCTOR PART NUMBERS

112B

L112B

N112B

NL112B

113B

L113B

N113B

NL113B

113F

114B

L114B

N114B

NL114B

112BPC

N112BPC

S112BPC

113BPC

113BPC1M

N113BPC

113FPC

114BPC

114BPC1M

◊L114BPC

N114BPC

NL114BPC

Double open circuit

.375" long bushing

Insulated bushing

.375" long bushing

.210" inside diameter bushing

Single closed circuit

.375" long bushing

Insulated bushing

.375" long bushing

Ring circuit closed

Double closed circuit

.375" long bushing

Insulated bushing

.375" long bushing

VII

XXVIII

XII

267

S-267

267

THREE CONDUCTOR PART NUMBERS

1 Other circuits available; contact factory. Schematics pages 79 and 80.

2 See Plug Section for other options.

3 Two tip springs.

◊Special order only. Contact Switchcraft.

SPECIFYING NOTE: Unless otherwise shown in

“Description”, jacks have .276" long threaded bushings

with .25" inside diameter.

SERIES 11* PC TERMINAL VIEW SERIES N11*

SPECIFICATIONS

MATERIAL

Mounting Bushing: Ser ies 11*, L11*, S11* -

Nickel-plated copper alloy.

Series N11*, NL11*, NS11* - Molded ther moplastic

over nickel-plated copper alloy sleeve.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

HI-D JAX 2- AND 3-CONDUCTOR

HI-D JAX®2- AND 3-CONDUCTOR

1/4" ENCLOSED PHONE JACKS (continued)

.375 (long bushing only)

[9.53]

Standard (Solder lugs)

M Series Hi-D Jax®with Insulated Bushing

Hi-D Jax®with PC Terminals Recommended

PCBoard Layout

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

100

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

HI-D JAX 2- AND 3-CONDUCTOR

Hi-D Jax®enclosed 1/4" phone jacks offer spring lock PC

terminals which close during insertion into PC board. Upon

completed inser tion, the terminals reopen to securely hold the

jack to the PC board during soldering.Solder “fills”the terminals

which provides an additional security from loosening.

The spring lock terminal is available on all Hi-D Jax®which

currently offer PC ter minals.

NOTE: Tip and ground terminals can be specified with spring

lock terminals (also ring ter minal on 3-conductor jacks).

MOUNTING

Jacks mount in a single .375" diameter hole on .625" minimum

centers. Series 11*, N11* and S11* mount in panels up to

.156 " thick.Series NL11* (long bushing) mount in panels up to

.250 " thick.Jac ks with PC terminals mount on PC boards up to

.094 " thick. Spr ing lock PC terminals hold jack securely to PC

board. Threaded bushing permits mechanical connection to

equipment panel. Mounting hardware is supplied. See

“RECOMMENDED PC BOARD LAYOUT” for fur ther details.

SERIES 11* - 2- and 3-conductor types, threaded metal

bushing .276" long. .250 inch inside diameter bushings.

SERIES N11* - Same as Series 11* except bushing is

molded thermoplastic for insulated mounting.

SERIES NL-11* - Same as Series N11* except b ushing is .375"

long for insulated mounting in panels up to .250" thick.

SERIES S11* - Same as Series 11* except bushing has .210"

inside diameter Smaller diameter protects against accidental

inser tion of plugs with .250" diameter fingers.

SPECIFICATIONS

MATERIAL

Mounting Bushing: Series 11*, S11*: Nickel-plated copper

alloy. Series N11*, NL11*: Molded thermoplastic over plated

copper alloy sleeve.

SPRING LOCK PC TERMINALS FOR HI-D JAX®

CLOSE-UP VIEW OF

SPRING LOCK TERMINALS

RECOMMENDED PC BOARD LAYOUT SPRING LOCK

TERMINALS (COMPONENT SIDE)

HI-D JAX®SHOWING SPRING

LOCK PC TERMINALS

TWO CONDUCTOR PART NUMBERS Typical

Jack Mating

Part Number Description Schematic Plug1

◊

111PCS Open circuit I 250

◊

N111PCS Insulated bushing I 250

◊

112APCS Single closed circuit III 250

◊

N112APCS Insulated bushing III 250

◊

113PCS Isolated “make” circuit V 250

◊

113EPCS Isolated “break” circuit IX 250

THREE CONDUCTOR PART NUMBERS

◊

112BPCS Double open circuit IV 267

◊

N112BPCS Insulated bushing IV 267

◊

S112BPCS .210" I.D. bushing IV S267

◊

113BPCS Single closed circuit VII 267

◊

N113BPCS Insulated bushing VII 267

◊

113FPCS Ring closed circuit XXVIII 267

◊

114BPCS Double closed circuit XII 267

◊

N114BPCS Insulated bushing XII 267

◊

NL114BPCS .375" long bushing XII 267

1 See Jack Section for other mating plugs.

◊Special order only. Contact Switchcraft.

ORDERING INFORMATION

NOTES:

1. SERIES 110PC––ALL HOLES TO CLEAR .078" X .016" TERMINAL.

2. SERIES 110PCS––TIP, RING & SLEEVE HOLES TO BE .055" DIA. RING SHUNT &

TIP SHUNT HOLES TO CLEAR .078" X .016" TERMINAL.

PARTIAL VIEW SHOWING SPRING LOCK TERMINALS

Tip, ring and sleeve terminals are spring lock type.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

101

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

RIGHT-ANGLE PHONE JACKS

These low-profile phone jacks have “snap-in” PC mounting,

right-angle plug insertion and available with 2- and 3-conductor

circuits and plastic or metal bushings .Ideal f or telecommunications,

data processing and other high quality audio connecting

applications.

SERIES SN37A - Right-angle PC mount phone jack with molded

plastic housing. Only .375" high, this jack features a plain

(non-threaded) bushing and accepts commercial standard phone

plugs with .25" diameter finger.

Jack circuit selection:

2-conductor • Single open circuit • Shunted tip

3-conductor • Double open circuit • Shunted tip and ring

Jack housing snaps into PC boards (.062" thick) and features

molded tension fingers to provide stable mount. Location pin

polarizes mounting for correct insertion every time. Clearance

between housing facilitates board cleaning without disturbing

internal springs. SN37 without tension fingers available on

special order.

Molded housing protects internal parts and allows high density

packaging.Supplied with “Snap-On” cover.

SERIES SN49A - Similar to Series SN37A, except .492" high and

insulated/plain (non-threaded) bushing.“Snap-On” cover available

on special order only.

SERIES SN49B - Similar to Series SN37A, except .492" high and

insulated threaded bushing. Washer and hex nut for bushing

mount supplied.“Snap-On” cover available on special order only.

SERIES SN49C - Similar to Series SN37A, except .492" high and

threaded metal bushing. Washer and hex nut for bushing mount

supplied.“Snap-On” cover available on special order only.

SERIES SN70B - This series features threaded/insulated

bushing and .708" in height.Circuit selection and housing f eatures

are same as Series SN49B.“Snap-On” cover not available.

SERIES SN70C - Same as Series SN70B, except bushing is

threaded metal type.

SPECIFICATIONS

MECHANICAL

Shock: Per MIL-STD-202, method 213.

Vibration: Per MIL-STD-202, method 201.

Insertion Force: 8 pounds maximum.

Withdrawal Force: 1.5 pounds minimum.

Life: 10,000 cycles minimum.

ELECTRICAL

Insulation Resistance: 2 x 106 MΩat 500 V DC per

MIL-STD-202, method 302 (initial).

Dielectric Withstanding Voltage: 500 V AC .

ENVIRONMENTAL

Thermal Range: -55°C (-67°F) to +85°C (+185°F) Non

operating.-20°C to + 65°C Operating.

Thermal Shock: Per MIL-STD-202d, method 107.

Humidity: Per MIL-STD-202, method 106, less steps 7A and 7B.

Salt Spray: Per MIL-STD-202, method 101.

MATERIAL

Housing and Cover: Black thermoplastic, UL 94V-O.

Contact Springs: Copper alloy with tin-plated terminals.

Hardware: Nickel-plated copper alloy.

Metal Bushing: Nickel-plated copper alloy.

ORDERING

1. Order jacks from tables on page 103.

2. For all special order items, contact Switchcraft.

SERIES SN37, SN49 AND SN70

1/4" RIGHT-ANGLE PHONE JACKS

SN37A14B with cover Number P2993

SN49B12B with cover Number P2994 SN49A12B

SN49C12B SN70B12A SN70C14B

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

102

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

SERIES RA - 2- and 3-conductor RA Jax®are designed with

split terminals which provide two distinct advantages over

contemporary jacks:

1. Positive retention of jack in PC board during wave soldering.

2.Split terminal permits additional solder flow paths up the

terminal for better mechanical/electrical connection

Tip spring design facilitates positiv e retention of diff ering mating

plug tip shapes (industry standard and others).

SERIES RN - Right-angle Hi-D Jax®permits space-saving

mounting on PC boards. Available in 2- and 3-conductor

types with or without shunt circuits, which can mate with .25"

diameter COMMERCIAL or TELEPHONE/MIL plug fingers.

Right-angle jack permits tip of mating plug to be inserted

parallel with PC board. Can be mounted on PC boards or

combined PC board and panel/chassis.

Mounted through .375" diameter holes (locknut and washer

supplied) in panels and chassis up to .141" thick. Minimum

mounting centers are .625". If insulated mount is desired,

mounting with flat, non-conductive washer (not supplied) is

recommended.

PC terminals mount on boards up to .125" thick, and hand dip

or wave soldering, is recommended.Three separate standoffs

fit through board to provide stable mounting.Threaded bushing

permits optional fastening to panel or chassis.

SERIES RN110 - 2- and 3-conductor right-angle types mount

in PC boards or panel/chassis.Bushing is .278" long.

SERIES - RA and RN

1/4" RIGHT-ANGLE PHONE JACKS (continued)

Series RN110

Series RA

SPECIFICATIONS

Housing: Thermoplastic.

Bushing: Integral with housing.

Springs: Copper allo y, silver-plated (also available with selectively

gold-plated contact points and selectively tin-plated terminals).

Contacts: Integral, part of shunt springs.

NOTE: Specifications for Mechanical, Electrical and Environmental

are the same for Hi-D®Jax. (page 98)

RIGHT-ANGLE PHONE JACKS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

103

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

RIGHT-ANGLE PHONE JACKS – SERIES RA, RN AND SN

1/4" RIGHT-ANGLE PHONE JACKS (continued)

SERIES SN

Part Numbers

SN37A111

SN37A12A1

SN37A12B1

SN37A14B1

SN49A111

SN49A12A1

SN49A12B1

SN49A14B1

SN49B111

SN49B12A1

SN49B12B1

SN49B14B1

SN49C11

SN49C12A

SN49C12B

SN49C14B

SN70B11

SN70B12A

SN70B12B

SN70B14B

SN70C11

SN70C12A

SN70C12B

SN70C14B

Description

2-cond., open circuit

2-cond., single closed circuit

3-cond., double open circuit

3-cond., double closed circuit

2-cond., open circuit

2-cond., single closed circuit

3-cond., double open circuit

3-cond., double closed circuit

2-cond., open circuit

2-cond., single closed circuit

3-cond., double open circuit

3-cond., double closed circuit

2-cond., open circuit

2-cond., single closed circuit

3-cond., double open circuit

3-cond., double closed circuit

2-cond., open circuit

2-cond., single closed circuit

3-cond., double open circuit

3-cond., double closed circuit

2-cond., open circuit

2-cond., single closed circuit

3-cond., double open circuit

3-cond., double closed circuit

Jack2

Schematic

III

XII

III

XII

III

XII

III

XII

III

XII

III

XII

Typical

Mating

Plug3

250

267

250

267

250

267

250

267

250

267

250

267

SERIES RA

Part Numbers

RA49B11

RA49B12A

RA49B12B

RA49B14B

RA49C11

RA49C12A

RA49C12B

RA49C14B

RA70B11

RA70B12A

RA70B12B

RA70B14B

RA70C11

RA70C12A

RA70C12B

RA70C14B

SERIES RN

Part Numbers

RN111PC

RN112APC

RN112BPC

RN113BPC

◊RN113FPC

RN114BPC

Description

2-cond., open circuit

2-cond., single closed circuit

3-cond., double open circuit

3-cond., double closed circuit

2-cond., open circuit

2-cond., single closed circuit

3-cond., double open circuit

3-cond., double closed circuit

2-cond., open circuit

2-cond., single closed circuit

3-cond., double open circuit

3-cond., double closed circuit

2-cond., open circuit

2-cond., single closed circuit

3-cond., double open circuit

3-cond., double closed circuit

2-cond., single open circuit

2-cond., single closed circuit

3-cond., double open circuit

3-cond., tip closed, ring open

3-cond., tip open, ring closed

3-cond., double closed circuit

Jack2

Schematic

III

XII

III

XII

III

XII

III

XII

III

VII

XXVIII

XII

Typical

Mating

Plug3

250

267

250

267

250

267

250

267

250

267

1 Series SN37A supplied with Part Number P2993 cover. Series SN49A and SN49B can

be supplied with Part Number P2994 cover on special order. Contact Switchcraft. 2 See pages 79 and 80.

3 Other mating plugs are available.

◊Special order only. Contact Switchcraft.

ORDERING INFORMATION ORDERING INFORMATION

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

104

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

JACK SCHEMATICS

RIGHT-ANGLE PHONE JACKS – SERIES SN

SERIES

SN37A SERIES

SN49A SERIES

SN49B

SERIES

SN49C SERIES

SN70B SERIES

SN70C

COVERS, PART NO. P-293 & P-2994

(No. P-2994, special order only)

RECOMMENDED PC

BOARD LAYOUT

SERIES SN37A, SN49A & SN49B

(Component Side)

RECOMMENDED PC

BOARD LAYOUT

SERIES SN49C

(Component Side)

SERIES SN

1/4" RIGHT-ANGLE PHONE JACKS (continued)

RECOMMENDED PC

BOARD LAYOUT

SERIES SN70B

(Component Side)

RECOMMENDED PC

BOARD LAYOUT

SERIES SN70C

(Component Side)

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

105

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

1/4"RIGHT-ANGLE PHONE JACKS – SERIES RA AND RN

SERIES RA and RN

1/4" RIGHT-ANGLE PHONE JACKS (continued)

RECOMMENDED PC

BOARD LAYOUT

(Component Side)

RECOMMENDED PC

BOARD LAYOUT

(Component Side)

RN SERIES

DIMENSIONS

SERIES RA49B SERIES RA49C

SERIES RA70B SERIES RA70C

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

106

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

JACK COVERS

520

515

Reliable, spring-loaded covers effectively seal front panel

bushing openings from dust and dirt when mating plugs are

not connected to jack. Series 500 is mounted with conventional

threaded bushing jacks. Special locknut (comes with Series

500 jack covers) seals tightly against rubber washer when

cov er is closed.Series 600 is used with certain type tip jacks.

Due to variab le jack dimensions, tw o .031" washers are supplied.

SPECIFICATIONS

MATERIAL

Base and Cover: Steel per QQ-S-698; finish per

MIL-F-14072 (Sig. C), enamel, semi-gloss.

Axle: Copper alloy per QQ-W-321, Type 321,

composition B. Plated per QQ-P-416, Type II, Class 3.

Spring: Stainless steel per QQ-W-432, Type 302.

Hex Nut: Copper alloy per QQ-B-626, composition 22.

Same plating as axle.

Gasket: Synthetic rubber per MIL-R-6855, Type II,

35-40 Durometer.

Washer (600 only): Steel per QQ-S-698; plated per

QQ-P-416, Type II, Class 3.

Additional Specifications for Numbers 512 and 612:

Same as above, except rivet, base, cover and hex nut

and washer (Number 612 only) are nickel-plated

per QG-N-290.

Color

Olive Drab

Bright Nickel

Part

No.

510

512

Part

No.

◊610

612

Color

Black

Navy Gray

Part

No.

515

520

Part

No.

615

◊620

◊Special order only. Contact Switchcraft.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

107

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

Series E jacks provide stable, secure connections in panels where

shock/vibration or accidental disconnect may occur. Plug locks-in

automatically upon insertion; press “PUSH” tab to unlock and

remove plug. Series E jacks have the same front panel

appearance as Series E Q-G®audio connectors.

SPECIFICATIONS

MECHANICAL

Life: 10,000 cycles minimum.

ELECTRICAL

Insulation Resistance: 2 x 106 MΩat 500 V DC per

MIL-STD-202, method 302 (initial).

Dielectric Withstanding V oltage: 1,000 V AC (rms).

ENVIRONMENTAL

Thermal Range: -55°C to +85°C (non-operating);

-20°C to +65°C (operating).

Thermal Shock: Per MIL-STD-202, method 107.

Humidity: Per MIL-STD-202, method 106.

Salt Spray: Per MIL-STD-202, method 101.

MATERIAL

Shell: Die-cast zinc, with satin nickel-plating.Black chrome over

nickel-plating on special order.

Insert and Latch: Thermoplastic, UL 94V-O.

Latch Release: Nickel-plated die-cast zinc.

Contact Springs: Tin-plated copper alloy.

LOCKING

PHONE JACKS

1/4" PHONE JACKS (continued)

Part

Number

E111L

E112BL

Description

2-cond., open circuit

3-cond., double open circuit

Jack

Schematic1

Typical

Mating

Plug2

250

267

1. See Jack Schematics, pages 79 and 80

2. See Plugs Section

THICK PANEL PHONE JACKS

1/4"PHONE JACKS – SERIES E (LOCKING)AND THICK PANEL PHONE JACKS

Jacks are standard 2- and 3-conductor phone jacks with extra long

threaded bushing for mounting in panels/chassis up to 1.25" thick.

Metal bushing virtually eliminates hum pick-up , and is ideal for electric

guitar and speaker connections. Jacks mate with standard

commercial phone plugs. See plug section for mating plugs. Jacks

mount in a single .469" diameter hole. Rugged cable clamp protects

connections from twisting and pulling stresses.

SPECIFICATIONS

MATERIAL

Mounting Bushing: Nickel-plated copper alloy with knurled flange.

Insulating Spacer: Rigid plastic.

Insulator/Spring Mount: Thermoplastic.

Springs: Copper alloy.

Terminals: Tip: Copper allo y.Ring: (Number 152B only) copper alloy.

Sleeve: Steel, tin-plated.

Hardware: Supplied with one, Number P10531 nick el-plated copper allo y

he x nut, and one, Number P14761 nic k el-plated copper alloy flat w asher .

RECOMMENDED

PANEL CUTOUT LOCKING PHONE JACKS, SERIES E

THICK PANEL PHONE JACKS

SERIES E

151

Part Jack Typical

Number Description Schematic Mating Plug

151 2-conductor, open circuit, nickel finish I 280

152 2-conductor, open circuit, brass finish I 280

152B 3-conductor, double open circuit, nickel finish IV 297

153 2-conductor, open circuit, gold-plated springs, I 280

electro-polish brass finish, 9/16-12 UNC wood threads

154 3-conductor, double open circuit, gold finish, IV 297

no cable clamp

155 3-conductor, double open circuit, black satin finish, IV

no cable clamp

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

108

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

EXTENSION JACKS AND 1/4"SPEAKER JACKS

Extension Jax®jacks are connected to the end of a cable.

2- and 3-conductor jacks mate with standard commercial

phone plugs, and have a sturdy cable clamp strain relief,

knurled shielded or molded black plastic handles, and a

screw type solder terminal. All internal parts are interlocked.

Note: See locking phone plugs section.

SPECIFICATIONS

MATERIAL

Body, Sleeve and Shielded Handle: Nickel-plated

copper alloy.

Plastic Handles: Molded black thermoplastic.

Springs: Special copper alloy.

Bushing and Flange: Plated copper alloy.

Insulation: Thermoplastic.

Clamp T erminals: Tin-plated copper alloy.

High power 2-conductor speaker jack carries 15A (continuous)

audio speaker current levels. Jack Number Z15J has positive

detent for plug retention. Terminations are solder lug; wires

accepted are up to 10 AWG.Red housing indicates high current

rating. Recommended mating plugs: 70, 184, 187 series.

SPECIFICATIONS

Housing: Glass reinforced ther moplastic, UL 94V-O.

Tip Spring and Ground Terminals: Copper alloy.

Bushing and Hardware: Nickel-plated copper alloy

(hardware supplied).

Heat Rise: 30°C with 15 A continuous carr y.

Life: 10,000 (minimum) with proper plug.

1/4" EXTENSION JACKS (IN-LINE)

1/4" SPEAKER JACKS

Part Number

Z15J

Description

High power speaker jack

Part

Number

120

121

128

Description

Black handle; screw ter minals

Black handle; solder lugs

Shielded handle; screw terminals

Shielded handle; solder lugs; cable clamp

Shielded handle; solder lugs

Mating

Plug1

250

TWO-CONDUCTOR PART NUMBERS

Part

Number

131

830

S830

838

1230

1238

Description

Shielded handle; solder lugs

Black handle; screw ter minals

Similar to No. 830 except, .21" I.D. sleeve

Black handle; solder lugs

Shielded handle; screw terminals

Shielded handle; solder lugs

Mating

Plug1

267

480

267

THREE-CONDUCTOR PART NUMBERS

80 120 121, 131

Z15J

121, 131

1. Other mating plugs are available.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

109

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

SHIELDED PHONE JACKS, SF-JACKS SHORT FRAME JACKS, MINI PHONE JACKS

.141" MINIATURE

PHONE JACKS

Shield is assembled as part of the jack;cover “snaps”into

place. Shield is designed for Hi Z circuits. Mounting is

through a 3/8" diameter hole in chassis/panel up to

.156" thick with hex nut and flat washer (supplied).

On special order, jacks with .21 inch inside diameter

bushing are available.

SPECIFICATIONS

MATERIAL

Cover and Shield: Copper alloy, nickel-plated.

Cable Entry Insulation: Thermoplastic.

1/4" SHIELDED PHONE JACKS

Part

Number

◊

CN11

◊

CN12A

Description

Uses Number 11 Littel-Jax ®jacks

Uses Number 12A Littel-Jax®jacks

Jack

Schematic1

III

TWO CONDUCTOR PART NUMBERS

◊

CN12B

◊

CN13B Uses Number 12B Littel-Jax®jacks

Uses Number 13B Littel-Jax®jacks IV

VII

THREE CONDUCTOR PART NUMBERS

1 See jack schematics on pages 79 and 80.

2 See Plug Section for mating information.

◊Special order only. Contact Switchcraft.

CN12A

125

SF-JAX®SHORT FRAME JACKS

Long spring design reliability with minimum behind-panel

depth. Series 50 same as Series 20, except solder lug

location requires more depth, but less panel space.

Number C55B has MIL type insulation and finish.

SERIES 20 SERIES 50

Typical

Part Schematic Mating Mounting

No. Cond. Number Plug MIL Type Contacts Rating In. (mm)

24B 3XII 267 -----

25 2XIII 250 -----

◊53B 3VII 267 -----

◊54A 2XI250 -----

◊54B 3XII 267 -----

◊55 2XIII 250 -----

◊C-55B 3XV482 JJ-095,

M641/14-1

Fine

Silver

125V

.375 (9.52)

hole,

mounts in

panels up

to .156

(3.96) thick

◊Special order only. Contact Switchcraft.

Part

Number

125 Description

Extension Jack

Jack

Schematic

Typical

Mating

Plug

750

MINIATURE EXTENSION JACK,

PHONE JACK NUMBER 125 (EIA STANDARD)

Cable-mounted Tini-Extension Jax®2-conductor single open

circuit jack has b uilt in cab le clamp/sleev e terminal.Mates with

Tini-Plug®phone plugs and other plugs with .141" diameter

fingers and compatible tip shape. Shielded housing/handle is

knurled for positive finger tip grip; solder lug ter minals.

Body and handle: Nickel-plated copper alloy.

Insulation: Rigid plastic.

Springs: Plated copper alloy.

TINI-EXTENSION JAX JACK

24B

53B

54A

54B

C55B

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

110

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MINIATURE PHONE JACKS

.141" MINIATURE PHONE JACKS

TINI-JAX®MINIATURE PHONE JACKS,

NUMBERS 41, 42A, 43A

Tini-Jax 2-conductor phone jacks, (for limited space

connecting, mate with miniature phone plugs having .141 "

diameter fingers and compatible tip shape) are 1/3 the siz e of

Littel-Jax®and weigh less than 1/8 ounce. Notched insulators

interlock internal parts. Unique tip spring shape mates with

Switchcraft Tini-Plug®phone plugs. Mounting hole: .250"

diameter in panels up to .125" thick (mounting hardware

supplied). For insulated mount, order two washers separately,

Number S1564 (swedged fiber washer .312" diameter

mounting hole) and number S2207 (flat phenolic washer).

SPECIFICATIONS

MECHANICAL

Life: 5,000 inser tion/withdrawal cycles, minimum.

ELECTRICAL

Contact Resistance: .075 ohms maximum.

Insulation Resistance: 5,000 MΩminimum.

Dielectric Withstanding Voltage: 250 V AC maximum.

Contact Rating: .25A, 48 V DC.

MATERIAL

Mounting Bushing: Nickel-plated copper alloy.

Insulating Spacers: Rigid plastic.

Springs: Special copper alloy.

Sleeve T erminal: Tin-plated copper alloy.

Hardware: Supplied with one, Number P11501

nickel-plated copper alloy locknut, and one,

Number S17901 nickel-plated steel flat washer.

TINI-D-JAX®MINIATURE ENCLOSED

PHONE JACKS, NUMBERS 142A, PC142A

Tini-D Jax uses Hi-D Jax®construction and mounts on .375"

centers.Weight:3.6 grams.Number 142A mounts through .25"

diameter hole in chassis/panel up to .125" thick. Four standoff

dimples can be molded into housing to reduce

effective length of bushing to .187" (special order).

Number PC142A has special spring terminals for “snap-in”

mounting to PC boards up to .125" thick - ready for hand,

wave or dip-solder ing.

SPECIFICATIONS

MECHANICAL

Life: 5,000 inser tion/withdrawal cycles, minimum.

Insertion/Withdrawal: 15 ounce minimum,

40 ounce maximum, inser tion. 12 ounce minimum,

25 ounce maximum, withdrawal.

ELECTRICAL

Contact Resistance: .10 ohms maximum.

Dielectric Withstanding Voltage: 250 V AC maximum.

Shunt T ension: 100 grams minimum.

MATERIAL

Housing: Molded plastic.

Mounting Bushing: Plated copper alloy.

Tip Spring: Plated copper alloy, bifurcated.

Shunt Springs: Plated copper alloy.

Sleeve Bracket: Plated steel.

Insulator: Rigid plastic.

Hardware: Number 142A supplied with one, Number P1975

nickel-plated copper alloy locknut, and one, Number S3997

nickel-plated steel flat washer.

Part

Number

42A

43A

142A

PC142A

Description

Open circuit

Shunted (closed circuit)

Special transfer circuit

Shunted (closed circuit)

Jack

Schematic1

III

Note 3

III

Typical

Mating

Plug2

750

1. See jack schematics, pages 79 and 80.

2. See Plugs Section for mating information.

3.When inser ted, plug tip contacts “make” tip spring. Further inser tion allows

tip to shor t “make” tip spring and tip spr ing together. Full insertion opens

tip shunt circuit.

41 42A 142A PC142A

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

111

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MINIATURE PHONE JACKS

.141" MINIATURE PHONE JACKS (continued)

“TINI-JAX” JACKS

142A “TINI-D” JACKS

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

112

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

FEATURES

• 3-conductor, miniature phone jack mates with 3.5 mm

finger plugs.

• Saves board space...two jacks in a single vertical

mount footpr int.

• Ideally suited for infra-red and convection oven

soldering 235°C (455°F).

• Board retention pins accommodate PC board thickness

range of .050" to .080".

• Single-screw panel mounting hole is standard.

• EMI-RFI shield, optional.

• Housing UL 94V-0 rated against flammability.

APPLICATIONS

• Multi-media workstations

• Headphones/microphone sets

• Interactive TV

• Audio

• Telecommunications

• Medical

• Computer

• Instrumentation

MATERIALS

Housing: Thermoplastic.

Tip and Ring Springs: Silver-plated copper alloy.

Shunt T erminals: Silver-plated copper alloy.

Sleeve T erminals: Silver-plated copper alloy.

Shield: Pre-tinned copper alloy.

PERFORMANCE SPECIFICATIONS

Insertion/Extraction Forces, initial: 0.8 to 6 pounds.

Dielectric Withstanding Voltage: 500 VAC .

Insulation Resistance, initial: 100 Megaohms, min.

Contact Resistance: Between plug and jack:

50 milliohms, maximum Between springs and shunts:

30 milliohms, maximum.

Life: 5000 cycles, minimum.

ORDERING INFORMATION

Part Number:

Shielded - 35RAPC7JS

Unshielded - 35RAPC7J

1. Order by part number.

2. Contact Switchcraft for special order information.

3.5MM DUAL STEREO JACK

UNSHIELDED - 35RAPC7J

SHIELDED - 35RAPC7JS

3.5MM DUAL STEREO JACK

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

113

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

3.5MM DUAL STEREO JACK

NOTES:

1. Shield isolated from terminals 1 and 6.

2. Width of all terminals = 0.032" (0.814 mm).

3. Use Camcar Textron S25 T8 TORX pan head “Duro-PT”

thread cutting fastener of appropr iate length or equivalent.

3.5MM DUAL STEREO JACK (continued)

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

114

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

3.5MM SINGLE MONO AND STEREO JACKS

FEATURES

• 2 and 3 conductor 3.5mm phone jacks

• Right angle PC mount, true SMT

versions, and open frame panel mounts

• Wide variety of circuits available

• Mates with all 3.5mm plugs Right angle

PC mount available in low profile,

horizontal styles

MATERIALS

Housing: Thermoplastic, UL94V-1

Terminals: Silver-plated, copper alloy

Bushing: Nickel-plated, copper alloy

Performance Specifications:

Contact Resistance: < 50 milliohms

Insulation Resistance: 100 milliohms min.

Dielectric Withstanding V oltage: 250

VAC (35RAPC2BHN2- 500 VAC)

Open Frame Versions Materials:

Housing (35PM2BV2):

Thermoplastic, 94V-1

Life: 5000 cycles, min.

Bushing: Nickel-plated, copper alloy

Insulating Washers: Rigid Plastic

Springs: Copper alloy

Sleeve T erminal: Tin-plated, copper alloy

Hardware: Supplied with one, P11501

nickel-plated brass locknut, and one,

S17901 nickel-plated steel flat washer

Performance Specifications:

Contact Resistance: .075 ohms max.

Insulation Resistance: 5,000 Mohms

min

Dielectric Withstanding V oltage:

250 VAC Life:5000 cycles, min

35RAPC2BHN2

35RAPC2AV35RAPC4BV4

35RAPC4BH3 35RAPC2BV4 35RAPC2BH3

Height vs.

Part Number Description Width Bushing

35RAPC2AV mono vertical threaded3

35RAPC2AHN2 mono horizontal non-threaded

35RAPC2AHN3 mono horizontal non-threaded

35RAPC2BHN2 stereo horizontal non-threaded

35RAPC2BHN3 stereo horizontal non-threaded

35RAPC3BHN2 stereo horizontal non-threaded

35RAPC3BHN3 stereo horizontal non-threaded

35RAPC4BHN2 stereo horizontal non-threaded

35RAPC4BHN3 stereo horizontal non-threaded

35RAPC2AH3 mono horizontal threaded3

35RAPC2BH3 stereo horizontal threaded3

35RAPC3BH3 stereo horizontal threaded3

Height vs.

Part Number Description Width Bushing

35RAPC4BH3 stereo horizontal threaded3

35RAPC2AV4 mono vertical threaded3

35RAPC2BV4 stereo vertical threaded3

35RAPC3BV4 stereo vertical threaded3

35RAPC4BV4 stereo vertical threaded3

35RAPC2AVN4 mono vertical non-threaded

35RAPC2BVN4 stereo vertical non-threaded

35RAPC3BVN4 stereo vertical non-threaded

35RAPC4BVN4 stereo vertical non-threaded

1. Order by part number

2. Contact Switchcraft for special ordering infor mation

3. Mounting hardware included.

Replacement Knurl Nut P3345

Part numbers which include the letter “N” designate non-threaded bushings.

Part numbers without the letter “N” designate threaded bushing.

ORDERING INFORMATION

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

115

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

3.5MM SINGLE MONO AND STEREO JACKS

3.5MM SINGLE, MONO AND STEREO JACKS (continued)

35RAPC2AV – MONO,VERTICAL,THREADED

MATERIALS

Coil Spring: Steel wire.

Bushing: Nickel-plated copper alloy.

Terminal: Silver-plated copper alloy.

Tip Spring: Silver-plated copper alloy.

Shunt T erminal: Plated copper alloy.

Cover: Thermoplastic, transparent UL 94V-2.

Body: Thermoplastic, UL 94V-1 black color.

PERFORMANCE SPECIFICATIONS

Contact Resistance: 20 milliohms maximum.

Insulation Resistance:

100 milliohms minimum at 250V DC.

Dielectric Withstanding Voltage: 250V AC.

Life: 5000 cycles, minimum.

Insertion Force: 0.88 pounds - 3.5 pounds.

Withdrawal Force: 0.88 pounds - 2.64 pounds.

MATERIALS

Coil Springs: Steel Wire.

Ring Spring: Copper alloy strip, tin alloy plating.

Ground T erminal: Copper alloy strip, tin alloy plating.

Bushing: Nickel-plated copper alloy.

Cover: Thermoplastic, UL 94V-0 black color.

Body: Thermoplastic, UL 94V-0 black color.

PERFORMANCE SPECIFICATIONS

Contact Resistance: 20 milliohms maximum,

initial 50 milliohms maximum, after life.

Insulation Resistance: 50 megohms minimum at 500V DC.

Dielectric Withstanding Voltage: 250V AC.

Life: 5,000 cycles, minimum.

Insertion Force: 0.88 lbs. to 3.50 lbs.

Withdrawal Force: 0.88 lbs. to 3.10 lbs.

35RAPC2AV4, 35RAPC2BV4, 35RAPC3BV4, 35RAPC4BV4 - STEREO,VERTICAL,THREADED

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

116

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

3.5MM SINGLE, MONO AND STEREO JACKS (continued)

MATERIALS

Cover: Thermoplastic, UL 94V-1 black color.

Ring Spring: Copper alloy.

Tip Spring: Silver-plated copper alloy.

Ground T erminal: Silver-plated copper alloy.

Metal: Copper alloy, nickel plating.

Body: Thermoplastic, UL 94V-0 black color.

PERFORMANCE SPECIFICATIONS

Contact Resistance: 30 milliohms maximum, initial

100 milliohms maximum, after life.

Insulation Resistance: 100 megohms minimum

at 500V DC.

Dielectric Withstanding Voltage: 500V AC.

Life: 5000 cycles, minimum.

Insertion Force: 0.88 pounds - 6.6 pounds.

Withdrawal Force: 0.88 pounds - 6.6 pounds.

MATERIALS

Coil Springs: Steel wire.

Tip Spring: Silver-plated copper alloy.

Ring Spring: Silver-plated copper alloy.

Ground T erminal: Silver-plated copper alloy.

Bushing: Nickel-plated copper alloy.

Cover: Thermoplastic, transparent UL 94V-2.

Body: Thermoplastic, UL 94V-1 black color.

PERFORMANCE SPECIFICATIONS

Contact Resistance: 20 milliohms maximum, initial

100 milliohms maximum, after life.

Insulation Resistance: 100 megohms minimum.

Dielectric Withstanding Voltage: 250V AC.

Life: 5000 cycles, minimum.

Insertion Force: 0.88

lbs.

- 3.50

lbs.

Withdrawal Force: 0.88

lbs.

- 3.10

lbs.

35RAPC2AHN2, 35RAPC2BHN2, 35RAPC3BHN2, 35RAPC4BHN2 - STEREO , HORIZONTAL, NON-THREADED

35RAPC2AH3,35RAPC2BH3, 35RAPC3BH3, 35RAPC4BH3 - STEREO, HORIZONTAL,THREADED

3.5MM SINGLE MONO AND STEREO JACKS

**Same drawing for jack with non-threaded bushing.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

117

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

Switchcraft introduces a new series of 3.5mm jacks. These

low profile jacks come in a wide variety of circuits, both

2 and 3 conductor versions. Circuits include mono closed,

stereo open, stereo tip closed and ring open, and stereo

closed. The 35RASMT Series is available on tape and reel

only. Contact Switchcraft for exact dimensions of the reels.

They’re designed for use in today’s electronic equipment

that features remote speakers, headsets, and headphones.

While they are more compact than commonly used PC

mount phone jacks, they are still extremely durable. Jacks

come on tape and reel, 1K per reel.

FEATURES AND BENEFITS

• SMT mounting

• Tape and reel packaging

• Wide variety of circuits

APPLICATIONS

• Computer

• Video Cameras

• Personal/Por table Audio Devices

• Multimedia

SPECIFICATIONS

Electrical Current Rating: 3A

Contact Resistance: <50 mohms

Insulation Resistance: 100 mohms (min.)

Dielectric Withstanding Voltage: 250VAC @ 1 minute

MECHANICAL

Lifecycles: 5,000

Operating T emperature: -25°C to +85°C

MATERIAL

Housing: Black thermoplastic

Sleeve, Ring and Tip Terminals:

Copper Alloy, silver-plated

Shunt T erminal: Copper Alloy, Silver-plated

Part Number/Description

35RASMT2AHNTR

Mono, closed circuit, on tape and reel

35RASMT2BHNTR

Stereo, dual open circuit,

on tape and reel

35RASMT3BHNTR

Stereo, tip closed and ring open

circuit, on tape and reel

35RASMT4BHNTR

Stereo, dual closed circuit,

on tape and reel

3.5MM SINGLE MONO

AND STEREO JACKS

35RASMT

3.5MM SINGLE MONO AND STEREO JACKS

(See next page for drawings.)

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

118

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

3.5MM SINGLE MONO AND STEREO JACKS (continued)

3.5MM SINGLE MONO AND STEREO JACKS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

119

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

3.5 mm SINGLE MONO JACKS

FEATURES

• 2-conductor phone jacks similar to Littel-Jax®

phone jacks, but smaller.

• For connecting in limited space

• Mate with 3.5 mm phone plugs

• Notched insulators interlock internal parts

• Mounting hole: .250" diameter in panels up to .125" thick

(mounting hardware supplied)

• For insulated mount, order two washers separately,

Number S1564 (swedged fiber washer .312" diameter

mounting hole) and number S2207 (flat phenolic washer)

SPECIFICATIONS

MECHANICAL

Life: 5,000 inser tion/withdrawal cycles, minimum

ELECTRICAL

Contact Resistance: .075 ohms maximum

Insulation Resistance: 5,000 MΩminimum

Dielectric Withstanding Voltage: 250V AC maximum

Contact Rating: .25A, 48V DC

TYPICAL

PART JAC K MATING

NUMBER DESCRIPTION SCHEMATIC1PLUG

35PM1 Open circuit I 750

35PM2A Shunted (closed circuit) III 750

1. See jack schematics on pages 79 and 80.

35PM2A

35PM1

ORDERING INFORMATION

1. Order by part number.

2. Contact Switchcraft for more information.

MATERIAL

Mounting Bushing: Nickel-plated copper alloy.

Insulating Spacers: Rigid plastic.

Springs: Copper alloy.

Sleeve T erminal: Tin-plated copper alloy.

Hardware: Supplied with one, Number P11501

nickel-plated brass locknut, and one, Number S17901

nickel-plated steel flat washer.

3.5MM SINGLE MONO JACKS

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

120

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MDSMT4BRATR

Switchcraft introduces a new series of 2.5mm jacks. These low

profile jacks come in a wide variety of circuits, both 2 and

3 conductor versions. Circuits include mono closed, stereo open,

stereo tip closed and ring open, and stereo closed. The MDSMT

Series is available on tape and reel only. Contact Switchcraft for

exact dimensions of the reels. They’re designed for use in today’s

electronic equipment that f eatures remote speakers , headsets, and

headphones. While they are more compact than commonly used

PC mount phone jacks, they are still extremely durable.

FEATURES AND BENEFITS

• SMT mounting

• Tape and reel packaging

• Wide variety of circuits

APPLICATIONS

• Computer

• Video Cameras

• Personal/Por table Audio Devices

• Multimedia

SPECIFICATIONS

Electrical Current Rating: 3A

Contact Resistance: <50 mohms

Insulation Resistance: 100 mohms (min.)

Dielectric Withstanding Voltage:

250VAC @ 1 minute

MECHANICAL

Lifecycles: 5,000

Operating T emperature: -25°C to +85°C

MATERIAL

Housing: Black thermoplastic

Sleeve, Ring and Tip Terminals:

Copper Alloy, silver-plated

Shunt T erminal: Copper Alloy, Silver-plated

2.5MM SINGLE MONO AND STEREO JACKS

Part Number/Description

MDSMT2BRATR

Stereo, dual open circuit

MDSMT2ARATR

Mono, closed circuit

MDSMT3BRATR

Stereo, tip closed and

ring open circuit

MDSMT4BRATR

Stereo, dual closed circuit

2.5MM SINGLE MONO

AND STEREO JACKS

2.5MM SINGLE MONO AND STEREO JACKS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

121

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

SUBMINIATURE PHONE JACKS

SUBMINIATURE PHONE JACKS,TR2A AND TR1PC

Extremely small, rugged, shunted Micro-Jax®2-conductor jack is 1/4 the

size of a standard phone jack and weighs less than 1/20 ounce. Can be

wired for open or closed circuit operation. Internally keyed insulators

interlock all parts and tip springs grip mating plugs positively. Mates

with Switchcraft Micro-Plug®phone plugs. Jacks mount through

.190" diameter hole in chassis/panels up to .093" thick. For insulated

mounting, a .281" diameter hole and .050" maximum panel thickness

applies. Order insulating washer separately. Number

P1617

(flat phenolic washer) and Number P1618 (swedged fiber washer).

Number TR1PC:

2-conductor closed circuit jack with PC

terminals. Open frame and enclosed versions available. Mates with

Switchcraft®Micro Plug®numbers 850, 855, and 880.

SUBMINIATURE ENCLOSED PHONE JACKS

Micro-D Jax®2-conductor jacks have insulated box construction and

subminiature size.

Number MDPC2A:

2-conductor closed circuit jack with PC

terminals. Mounts to single-, double-sided or multilayer boards either

singly or in rows as close as .344" centers (+/- .01 inches). Bushing is

.10" inside diameter.

Number MDSL2A:

Same as MDPC2A except, 1. solder lugs, 2.

bushing is #10-48 threaded (nut and washer supplied), and 3. mount

ing centers are .35" or .313". When mounted on .313" centers, sleeves

or adjacent jacks may be in intimate contact. Mounts through a .203"

diameter hole in chassis/panels up to .063" thick.

SUBMINIATURE RIGHT-ANGLE PHONE JACKS

2-conductor jacks have molded housing which protects all internal

parts. Panel/chassis or PC boards mounting in rows, if desired, on

.351" centers. PC ter minals need only .382" behind-panel clearance.

Number MDPC2ARA:

PC terminals mount/ter minate directly to PC

or multilayer boards. Bushing clears a .156" diameter panel hole.

Number MDSL2ARA:

Right-angle solder lugs and #10-48 threaded

bushing for chassis/panel mount. Mounts in .203" diameter hole in

chassis/panels up to .063" thick.

SPECIFICATIONS - MICRO-JAX®ELECTRICAL:

Contact Resistance:

.10 ohms maximum (spring to plug).

Shunt Resistance:

.10 ohms maximum.

Dielectric Withstanding Voltage:

250 V AC .

Shunt T ension:

60 grams minimum.

MATERIAL:

Mounting Bushing:

Nickel-plated copper alloy.

Insulating Spacers:

Rigid plastic.

Springs:

Nickel-plated copper alloy. Integral contacts are plated.

Tip, Shunt and Sleeve Terminals:

Silver-plated copper alloy.

Hardware:

Supplied with one,

P15331

nickel-plated copper alloy

hex nut, and one

S29571

nickel-plated copper alloy flat washer.

MATERIAL - TR1PC

Threaded Bushing:

Nickel-plated copper alloy.

Tip Spring:

Copper alloy.

Sleeve/Ground Terminal:

Copper allo y tin-lead with nickel underplate.

MECHANICAL - TR1PC:

Life:

10,000 inser tion/withdrawal cycles, minimum.

Insertion/Withdrawal Forces:

11 ounces inser tion,

11 ounce minimum withdrawal.

ENVIRONMENTAL - TR1PC:

Thermal Range:

-55°C to +85°C (non-operating);

-20°C to +65°C (operating).

Thermal Shock:

Per MIL-STD-202, method 107.

Humidity:

Per MIL-STD-202, method 106.

Salt Spray:

Per MIL-STD-202, method 101.

SPECIFICATIONS - MICRO-D JAX

MECHANICAL:

Life:

10,000 inser tion/withdrawal cycles minimum.

Insertion/Withdrawal Forces:

11 ounce inser tion,

11 ounce minimum withdrawal.

ELECTRICAL:

Contact Resistance:

.010 ohms maximum (initial), .020 ohms

maximum (after humidity, durability exposure), .10 ohms

maximum (after salt spray).

Insulation Resistance:

10,000 MΩminimum (initial),

1,000 MΩminimum (after humidity, durability exposure).

Dielectric Withstanding Voltage:

500 V AC maximum.

Contact Rating:

.125 A, 125 V AC.

ENVIRONMENTAL:

Thermal Range:

-55°C to +85°C (non-operating);

-20°C to +65°C (operating).

Thermal Shock:

Per MIL-STD-202, method 107.

Humidity:

Per MIL-STD-202, method 106.

Salt Spray:

Per MIL-STD-202, method 101.

MATERIAL:

Housing:

Glass reinforced plastic.

Insulation:

Rigid plastic.

Mounting Bushing (Micro-D):

Nickel-plated copper alloy.

Mounting Bracket (Right-Angle Micro-D):

Nickel-plated copper alloy.

Tip Spring:

Silver-plated copper alloy.

Shunt T erminal:

Silver-plated copper alloy.

Sleeve T erminal (Micro-D):

Steel, tin-plated.

Sleeve Terminal (Right-Angle Micro-D):

Silver-plated

copper alloy.

Hardware (Micro-D):

Same as Micro-Jax (MDSL2A).

Hardware (Right-Angle Micro-D):

Hex nut, nickel-plated

copper alloy,

Number P15331

;flat washer, nickel-plated

copper alloy

S29571

;not supplied with MDPC2A.

All are 2-Conductor (closed circuit). Note 1.: See Jack Schematics page 79

and 80. Note 2.: See Plugs Section for mating information.

.101" SUBMINIATURE PHONE JACKS

TR2A TR1PC MDPC2A MDSL2A MDSL2ARA MDPC2ARA

Part Jack Typical Part Jack Typical

No. Schem.1Mating Plug2No. Schem.1Mating Plug2

TR2A MDSL2A

TR1PC }III 850 MDPC2ARA }III 850

MDPC2A MDSL2ARA

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

122

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

SUBMINIATURE PHONE JACKS

.101" SUBMINIATURE PHONE JACKS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

123

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

PHONO JACKS

Part Number Description

BPJR01 Rear mount, black insulator

BPJR01AU Rear mount, black insulator, gold plated

BPJR02 Rear mount, red insulator

BPJR02AU Rear mount, red insulator, gold plated

BPJR03 Rear mount, white insulator

BPJR03AU Rear mount, white insulator, gold plated

BPJR04 Rear mount, yellow insulator

BPJR04AU Rear mount, yellow insulator, gold plated

BPJR05 Rear mount, blue insulator

BPJR05AU Rear mount, blue insulator, gold plated

BPJR06 Rear mount, green insulator

BPJR06AU Rear mount, green insulator, gold plated

3501F Rear mount, rigid plastic mounting flange

3501FR Rear mount, natural insulator

For insulated mounting, order S1028 and S1029 insulating washers

BPJF01 Front mount, black insulator

BPJF01AU Front mount, black insulator, gold plated

BPJF02 Front mount, red insulator

BPJF02AU Front mount, red insulator, gold plated

BPJF03 Front mount, white insulator

BPJF03AU Front mount, white insulator, gold plated

BPJF04 Front mount, yellow insulator

BPJF04AU Front mount, yellow insulator, gold plated

Part Number Description

BPJF05 Front mount, blue insulator

BPJF05AU Front mount, blue insulator, gold plated

BPJF06 Front mount, green insulator

BPJF06AU Front mount, green insulator, gold plated

3501FP Front Mount, natural insulator

3505F RF version, uses low-loss nylon insulation

For insulated mounting, order S2207 and S1564 insulating washers

BPJJ01 Feed through, black insulator

BPJJ01AU Feed through, black insulator, gold plated

BPJJ02 Feed through, red insulator

BPJJ02AU Feed through, red insulator, gold plated

BPJJ03 Feed through, white insulator

BPJJ03AU Feed through, white insulator, gold plated

BPJJ04 Feed through, yellow insulator

BPJJ04AU Feed through, yellow insulator, gold plated

BPJJ05 Feed through, blue insulator

BPJJ05AU Feed through, blue insulator, gold plated

BPJJ06 Feed through, green insulator

BPJJ06AU Feed through, green insulator, gold plated

3503 Extension jack, shielded handle

3514PC Ver tical PC mount, nickel plated steel bushing

3515PC Ver tical PC mount, ceramic bushing

3517PC Horizontal PC mount, nickel plated steel bushing

BULKHEAD PHONO JACKS

FEATURES AND BENEFITS

• Front or rear mount configurations

• Durable plated machined brass construction

• All mounting hardware is included

APPLICATIONS

• Audio

• Video

• General Purpose Electronics

OPTIONS

• Front or rear mount solder type receptacles

• Jack to jack bulkhead configuration

• Insulator colors

• Gold or nickel plating

SPECIFICATIONS

Material and Platings Housing:

Nickel or Gold-plated Brass

Contact: Nickel-plated Brass Insulator: ABS

Hardware: Nickel-plated Brass. Switchcraft introduces a

complete line of bulkheadmount phono (RCA) jac ks to meet the

most critical audio, audio/video, and general-purpose electronic

applications. These jacks are offered in front and rear mount

solder type as well as jack to jack bulkhead configurations.

These jacks are available with black, white, blue, green, red,

and yellow insulators and nickel or gold plated bodies. All

mounting hardware is included.

Housing: Nickel or gold plated, copper alloy

(3514PC, 3515PC, 3517PC: Nickel plated, steel)

Terminals: Nickel plated, copper alloy (3515PC:Tin plated,

copper alloy)

Bushing: Nickel-plated, copper alloy (3515PC: Ceramic)

Insulators: Thermoplastic

(3517PC: Ceramic and glass filled thermoplastic)

3517PC BPJR01 BPJF01 BPJJ01 3505F 3503

3501F 3501FP 3501FR 3514PC 3515PC

(See next page for drawings.)

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

124

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

PHONO JACKS (continued)

PHONO JACKS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

125

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

PHONO JACKS AND PHONO JACK SETS

PJRAN1X1U03 PJRAN2X1U02 PJRAS2X1S01

PJRAS2X2S01

PJRAS3X1S01 PJRAS3X2S01

PJRAS4X2U01

PJRAS1X2S02

PJRAS1X3S01 PJRAS1X3U01

PJRAN3X1U02

PJRAN3X1U03

PJRAS1X1S04

Switchcraft, the industry recognized leader in audio-video

connectivity, introduces the addition of a comprehensive line of

PCB Mount RCA Jacks and Jack Sets. Switchcraft’s newest

product family addresses the requirements of the most critical

audio and audio/video applications.1, 2, 3, 4, 6, and 8 position

jack sets are offered in a variety of color combinations with

numerous plating, grounding, shielding, mounting, and

justification options.

FEATURES AND BENEFITS

• High temperature plastic housings and long life contacts

• Snap fit PCB contacts and housings

• Low profile footprint

• Numerous options and configurations

APPLICATIONS

• Audio

• Video

• General Purpose Electronics

OPTIONS

• Right angle and straight PCB mount

• Horizontal and vertical justification

• Shielding and grounding

• Bulkhead mounting screw

• Colors

• Plating

SPECIFICATIONS

ELECTRICAL

Temperature Rang e: -25 to +80°C

Rated Voltage: 34V DC or AC

Withstand Voltage: 500V

Rated Current: 2A DC or AC

Dielectric Strength: 500V AC @ 1 minute

Contact Resistance: <30 mohms

Insertion Force*: <29.4N

Extraction Force*: 1N to 29.4N

* Depends Upon Mating Plug

MATERIAL AND PLATINGS

Housing: UL94-HB Rated, ABS

Insulators: ABS

Ground Shell and Terminal: Nickel or Gold Plated, Copper Alloy

Terminals: Tin Plated Copper Alloy

PHONO JACKS AND PHONO JACK SETS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

126

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

PHONO JACKS AND PHONO JACK SETS

Part Number Color

PJRAN1X1U01 Black

PJRAN1X1U02 White

PJRAN1X1U03 Red

PJRAN1X1U04 Yellow

Call factory Green

Call factory Blue

PJRAS1X1S01 Black

PJRAS1X1S02 White

PJRAS1X1S03 Red

PJRAS1X1S04 Yellow

Call factory Green

Call factory Blue

Part Number Color

PJRAN2X1U01 Red/White

PJRAN2X1U02 White/Red

PJRAS2X1S01 Red/White

PJRAS2X1S02 White/Red

PJRAS1X2S01 Red

White

PJRAS1X2S02 White

Red

Part Number Color

PJRAN3X1U01 Red/Yellow/White

PJRAN3X1U02 Red/Green/Blue

PJRAS3X1S01 Red/White/Yellow

PJRAS3X1U03 Red/Green/Blue

PJRAS1X3S01 Red

White

Yellow

PJRAS1X3S02 Green

Blue

Red

Part Number Color

PJRAN3X1U02 Red/White/Yellow

PJRAS1X3U01 Yellow

White

Red

1 POSITION PCB MOUNT 2 POSITION PCB MOUNT

3 POSITION PCB MOUNT

4, 6, & 8 POSITION PCB MOUNT

COMBINATION PHONO AND S-VIDEO PCB MOUNT

Part Number Color

PJRAS2X2S01 White x 2

Red x 2

PJRAS3X2S01 White x 3

Red x 3

PJRAS3X2S02 Red/White/Yellow

Red/White/Yellow

PJRAS4X2U01 White x 4

Red x 4

Ordering Information (Contact factory for color, shielding, grounding, justification options.)

PJ RA S # X # S 01 AU

Ground Shell Plating

Version

Shielding

Positions Vertical

Positions Horizontal

Mounting

Justification

Product Type

Phono Jack RA - Right Angle S - Screw(s) 1,2,3, or 4 By 1,2, or 3 S - Shielded AU/Gold

ST - Straight N - No Screws U - Unshielded

PHONO JACKS AND PHONO JACK SETS (continued)

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

127

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

PHONO JACKS AND PHONO JACK SETS

PHONO JACKS AND PHONO JACK SETS (continued)

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

128

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

PHONO JACKS AND PHONO JACK SETS

PHONO JACKS AND PHONO JACK SETS (continued)

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

129

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

PHONO JACKS AND PHONO JACK SETS (continued)

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

PHONO JACKS AND PHONO JACK SETS

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

130

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

RIGHT ANGLE MINIATURE POWER JACKS

SPECIFICATIONS:

Materials: Housing:Thermoplastic

Terminals:

RAPC700:

Sleeve: Silver plated copper alloy

Tip: Nickel plated, copper alloy

RAPC742, RASM742TR, RAPC732OF, RAPC742OF,

RAPC752, RAPC752S, RASM752TR, RASM752STR:

Sleeve and tip: Silver plated tin

Shunt: Silver plated copper alloy

RASM700, RASH700:

Sleeve: Tin plated copper alloy

Tip: Nickel plated copper alloy)

ELECTRICAL

Current Rating: 3A

(RAPC700, RASH700, RASM700: 5A)

Contact Resistance: <50 mohms

Insulation Resistance: 100 mohms min.

(RAPC700, RASH700, RASM700: 30 megohms

@100V DC)

Dielectric Withstanding Voltage: 250 VAC@ 1 minute

MECHANICAL:

Lifecycles: 5,000 min.

Note: Contact factory for specific infor mation on tape and reel options. *Pin Size

(in/mm) 1. Open Frame 2.Tape and Reel. 3. Shielded 4. Tape and Reel, Shielded.

Note: Available with P locating post as an option.

Note: Available with tin-plating as a special order.

Note: Available with Hi-temp material, contact factory for details.

RAPC732OF RAPC742

RASM742TR

RASM752TR

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

Part Number Pin Siz e* Description

RAPC712 0.100"/2.5mm Right Angle, PC mount

RASH712 0.100"/2.5mm Right Angle, hybrid mount

RASM712 0.100"/2.5mm Right Angle, SMT mount

RAPC722 0.080"/2.0mm Right Angle, PC mount

RASH722 0.080"/2.0mm Right Angle, hybrid mount

RASM722 0.080"/2.0mm Right Angle, SMT mount

RAPC732 0.050"/1.3mm Right Angle, PC mount

RAPC732OF 0.050"/1.3mm Right Angle, PC mount1

RASH732 0.050"/1.3mm Right Angle, SMT mount

RASM732 0.050"/1.3mm Right Angle, hybrid mount

RAPC742 0.040"/1.0mm Right Angle, PC mount

RAPC742OF 0.040"/1.0mm Right Angle, PC mount1

RASM742TR 0.040"/1.0mm Right Angle, SMT mount2

RAPC752 0.025"/0.65mm Right Angle, PC mount

RAPC752S 0.025"/0.65mm Right Angle, PC mount3

RASM752TR 0.025"/0.65mm Right Angle, SMT mount2

RASM752STR 0.025"/0.65mm Right Angle, SMT mount4

RASM752STR

RASM 712

RASM 722

RASM 732P

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

131

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

RAPC 712/722/732

RASM 712/722/732

RASH 712/722/732

RIGHT ANGLE MINIATURE POWER JACKS (continued)

RIGHT ANGLE MINIATURE POWER JACKS

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

132

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

RIGHT ANGLE MINIATURE POWER JACKS

RIGHT ANGLE MINIATURE POWER JACKS (continued)

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

133

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

RIGHT ANGLE MINIATURE POWER JACKS (continued)

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

RAPC752

RAPC752S RASM752STR

RASM752TR

PC BOARD LAYOUT

COMPONENT SIDE

PC BOARD LAYOUT

COMPONENT SIDE

PC BOARD LAYOUT

COMPONENT SIDE

PC BOARD LAYOUT

COMPONENT SIDE

RIGHT ANGLE MINIATURE POWER JACKS

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

134

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

STRAIGHT MINIATURE POWER JACKS

FEATURES:

• Automatic switch over from AC to DC

permitted by sleeve shunt spring.

• Split center pin shaped to hold mating plug firmly.

• Bushing length available as 0.219" or extended

0.319" to permit use in thicker panels.

• Non-turn mounting possible using standard

“D” shape bushing.

• Insulated mounting hardware available.

• Right angle versions offer “kinked” PC

terminals for added board retention.

MATERIALS:

Housing: Thermoplastic

Bushing: Plated copper alloy

Terminals: Plated copper alloy

Insulators: Rigid Plastic

Hardware: Supplied with one P2439 nickel plated copper

alloy hex nut, and one P2441 nickel plated steel flat washer

ELECTRICAL:

Current Rating: 5A, 12V DC resistive

Contact Resistance: 0.01 Ohms max. (initial),

0.02 Ohms max. (after humidity, durability exposure),

0.10 Ohms max. (after salt spray)

Insulation Resistance: 10,000 Mohms min. (initial),

1,000 Mohms min. (after humidity, durability exposure)

Dielectric Withstanding Voltage: 500 VAC max.

MECHANICAL:

Lifecycles: 10,000 cycles min.

Part Number Pin Size* Description Typical Mating Plug

712A 0.100"/2.5mm Solder lugs 760

712RA 0.100"/2.5mm Right angle PC terminals 760

L712A 0.100"/2.5mm Solder lugs, long bushing 761K

L712RA 0.100"/2.5mm Right angle PC terminals, long bushing 761K

PC712A 0.100"/2.5mm Straight PC terminals 760

PCL712A 0.100"/2.5mm Straight PC terminals, long bushing 761K

722A 0.080"/2.0mm Solder lugs S760

722RA 0.080"/2.0mm Right angle PC terminals, long bushing S760

L722A 0.080"/2.0mm Solder lugs, long bushing S761K

L722RA 0.080"/2.0mm Right angle PC terminals, long bushing S761K

PC722A 0.080"/2.0mm Straight PC terminals S760

PCL722A 0.080"/2.0mm Straight PC terminals, long bushing S761K

732A 0.050"/1.3mm Solder lugs 860

732RA 0.050"/1.3mm Right angle PC terminals 860

PC732A 0.050"/1.3mm Straight PC terminals 860

2C1072 Jack covers for 712A and 722A

712A PC712A

2C1072

L722A

L712RA

Note: For insulated mounting order P2442 phenolic flat washer and S4263 swedged fiber washer.

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

135

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

STRAIGHT MINIATURE POWER JACKS (continued)

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

STRAIGHT MINIATURE POWER JACKS

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

136

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

VJ SERIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

FEATURES AND BENEFITS

• HD Series meets SMPTE 292M Specifications

• SD Series has a bandwidth from DC to 1.75GHz

• Jacks feature rugged heavy duty housings

VIDEO JACK SPECIFICATIONS

ELECTRICAL

Rated Bandwidth: 2.4 GHz (HD), 1.75 GHz (SD)

Characteristic Impedance: 75 ohms

Return Loss: Better than –15 dB

Insertion Loss: Better than –.5 dB

Contact Resistance: Less than 20 milliohms

Termination Resistance: 75 W, ±1%

Center Conductor: Accepts .090 pin diameter

MECHANICAL

Mechanical Shock: Per MIL-STD-202,

Method 213, Test condition I

Vibration: Per MIL-STD-202, Method 201

Insertion Force: 12 lbs. maximum

Withdrawal Force: 3 lbs. minimum

Life Cycle: 30,000

MATERIAL

Housing: Zinc alloy, nickel plated

Center Contacts: Copper alloy, gold plated

Switching Springs: Copper alloy, gold plated

Grounding Contacts:

HD Series - Copper alloy, gold plated

SD Series - Copper alloy, nickel plated

Insulators: Thermoplastic, UL 94V-0 rated

ENVIRONMENTAL

Operating T emperature: – 40ºC to 65ºC

Storage T emperature: – 55ºC to 85ºC

Thermal Shock: Per MIL-STD-202,

Method 107

Moisture and Humidity:

Per MIL-STD-202, Method 106.

The HD Series meets SMPTE 292M

specifications for high definition video

signaling, covering a bandwidth range

from DC to 2.4GHz.The SD Series is

perfect for serial digital, with a bandwidth

from DC to 1.75GHZ.

VPP24K3HD75T

See page 193 for Patch panel information.

VJHD*75TX

VJ SERIES

NORMALLED NON-NORMALLED

NON-TERMINATED NON-TERMINATED

NON-NORMALLED NORMALLED

TERMINATED TERMINATED

Ordering–Individual Jacks

Part Number Type Description

VJHD*75TX HD Terminated

VJHD*NTX HD Non-terminated

VJSD*75TX SD Terminated

VJSD*NTX SD Non-terminated

*Add “N” for non-normalled version

FREQUENCY (MHz) FREQUENCY (MHz)

SMITH CHART

(TYPICAL)

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

137

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

MVJ SERIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MVP32K3*75T

MVJ*75T

MVJ SERIES

SMITH CHART (TYPICAL) RETURN LOSS (TYPICAL) RETURN LOSS (TYPICAL)

FREQUENCY (MHz) FREQUENCY (MHz)

FEATURES AND BENEFITS

• Midsize video jacks rated from DC to 3 GHz

• Available in ter minated or non-terminated configurations

MIDSIZE VIDEO JACK SPECIFICATIONS

ELECTRICAL

Rated Bandwidth: 3.0 GHz

Characteristic Impedance: 75 ohms

Return Loss: See Typical Retur n Loss Char t

Insertion Loss: See Typical Inser tion Loss Chart

Contact Resistance: Less than 20 milliohms

Termination Resistance: 75 W, ±1%

Center Conductor: Accepts .048 pin diameter

MECHANICAL

Mechanical Shock: Per MIL-STD-202,

Method 213, Test condition I

Vibration: Per MIL-STD-202, Method 201

Insertion Force: 12 lbs. maximum

Withdrawal Force: 3 lbs. minimum

Life Cycle: 30,000

MATERIAL

Housing: Zinc alloy, nickel plated

Center Contacts: Copper alloy, gold plated

Switching Springs: Copper alloy, gold plated

Grounding Contacts: Copper alloy,

gold plated

BNC Insulators: Teflon

Actuators: Thermoplastic, UL94V-0 rated

ENVIRONMENTAL

Operating T emperature: – 40ºC to 65ºC

Storage T emperature: – 55ºC to 85ºC

Thermal Shock: Per MIL-STD-202,

Method 107

Moisture and Humidity:

Per MIL-STD-202, Method 106

See page 196 for Patch panel information.

Ordering Information

Pa r t

Number Jack Description

MVJ*75T HD Terminated

MVJ*NT HD Non-terminated

*Add “N” for non-normalled version

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

138

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MIL-TYPE 1/4"PHONE PLUGS

FEATURES

Designed for high quality communication equipment to meet

military requirements, This series features one-piece tip rod

and one-piece slee ve and plug body, assembled together into

a mode as inserts, providing a finished plug with complete

continuity of thermoplastic insulation between top rod and

plug slee ve.Internal (invisible externally) interlock mechanically

engages the metal and plastic components providing a

realistic lock to prevent parts shifting. Design and mater ial in

accordance with MIL-P-642(A), MIL par t number molded or

stamped on handle, manufacturer’s trademark (as required

by MIL specification) appears on plug body.

SPECIFICATIONS

Tip Rod, Body and Screws: Copper alloy, natural finish.

Terminals: Tinned copper alloy.

Insulation: Thermoplastic, per MIL-P-22985, Type II, Class 1.

Handles: Thermoplastic, Type 6, per MIL-M-20693, Type II.

Shielded; machined from copper alloy, nickel-plated.

STRAIN RELIEF CLAMP

For MIL-type Littel-Plug phone plugs. P2380 conforms to

Specification SC-A-7674-F - supplied with Plug Numbers 430, 440,

445 and 470. P2381 meets Specification MS-35762 - supplied with

Plug Number 480 and Extension-Jax®phone jack, Number 820.

MIL-TYPE 1/4" PHONE PLUGS

420, 425

430 480 (.206")

440, 445 484 (.206")

2-CONDUCTOR 3-CONDUCTOR

482, 483

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

139

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LITTEL PLUG PHONE PLUGS

FEATURES AND BENEFITS

• 3 conductor plug

• Designed for high quality communication

equipment

• One-piece tip rod ensures electrical continuity

• Brass plug finger versions meet MIL specifications

• ‘N’ and ‘NC’ suffix versions have nickel-plated

plug fingers, excellent for audio applications

• ‘NC’’ suffix option has rugged, heavy duty

cable clamp, solder terminals for easier

solderability and assembly. Metal shielded handle

• ‘NCP” - plastic handle

SPECIFICATIONS

Plug Finger: Brass, natural finish or nickel-plated

Terminals: Brass, electro-tinned

Insulation: Ethyl cellulose, per MIL-P-22835, Type II,

Class 1, or acetal resin

Handles: Plastic-nylon molding plastic, Type 6,

per MIL-M-20693, Type II. Shielded metal handle with red,

black or nickel finish

ORDERING INFORMATION

1. Order by part number.

2. Contact Switchcraft for more information.

3. Mating jacks available.

Number

482NCP

Number

483NCP

Number

485NC

LITTEL PLUG®PHONE PLUGS

PART NO. 482NC, 482NCP, 483NC, 483NCP, 485NC

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

140

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MIL

Part Number Conductors Terminals Handle Part Number Notes

482N 3Screw Red None Plastic handle, nickel

plated plug finger

482NC 3Cable Clamp Shielded None Red metal handle, nickel

plated plug finger

482NCP 3Cable Clamp Red None Plastic handle,nickel

plated plug finger

483N 3Screw Black None Plastic handle, nickel

plated plug finger

483NC 3Cable Clamp Shielded None Black metal handle,nickel

plate plug finger

483NCP 3Cable Clamp Black None Black plastic handle, nickel

plated plug finger

485NC 3Cable Clamp Shielded None Nickel plated handle,nickel

plated plug finger

480 SERIES PART NUMBERING CHART

LITTEL PLUG®PHONE PLUGS

LITTEL PLUG PHONE PLUGS

Part 206" dia. 1/4" dia. Brass Nickel Handle Red Black Nickel Standard Large

number fing er finger finger finger Material handle handle handle cable clamp cable clamp

480 ••Plastic • •

482 •• Plastic • •

482N ••Plastic • •

482NC ••Metal • •

482NCP ••Plastic • •

483 •• Plastic • •

483N ••Plastic • •

483NC ••Metal • •

483NCP ••Plastic • •

484 ••Plastic • •

485NC ••Metal • •

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

141

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MIL-TYPE 1/4"PHONE PLUGS

FEATURES

Design and material strictly in accordance with Specification

MIL-P-642(A), MIL part number molded or stamped on

handle, manufacturer’s trademark (as required in MIL

Specification) appears on plug body. Ideal for use in broadcast

and recording studios, military, industrial and telephone

switchboard applications, instrumentation and telemetr y.

Individual plugs, featuring one-piece tip rod and one-piece

sleeve and plug body, with complete continuity of

thermoplastic insulation between plug elements, are placed

into handles to provide a double Twin-Plug®plug (two

electrically-independent 2-conductor plugs spaced .625"

center-to-center, with self-alignment feature). 411, 414 and

415 Twin-Plug plugs have provision for use of Cord Clamp

Number S2674.412 Twin-Plug has external Cord Anchor.

6-conductor Twin-Plug, 414 and 415, provide two

electrically-independent 3-conductor plug fingers spaced on

.625" centers.Fingers are insulated from each other and each

provides tip , ring and slee ve connections .Black plastic handle

is notched to indicate polarity. Accepts standard 6-conductor

cables. Handle has provision for use of Cord Clamp, S2674.

Fingers of 414 are .25" diameter and mate with Switchcraft

type MT389 Twin-Jax®, MT333B, MT336 MT-Jax®, and other

jacks having .25" inside diameter sleeves and mounted

on .625" centers. 415 has a .25" diameter finger and a .206"

diameter finger to provide automatic polarization.Fingers mate

with Switchcraft MT332B and MT342B MT-Jax, respectively.

STRAIN RELIEF CLAMP

Natural brass. For use only with 411, 414, 415 Twin-Plug,

S2674.

SPECIFICATIONS

Tip, Rod, Ring Sleeve, Body, Screws: Copper alloy, natural

finish.Number 412 Handle Screws - iridescent iridite ov erplating.

Terminals: Tinned copper alloy. (Latest MIL Specifications

no longer specify terminals; terminal furnished is the type

referenced as TM-89).

Insulation: Thermoplastic; per MIL-P-22985, Type II, Class 1.

Handle: Thermoplastic on 411, 412, 414 and 415, per

MIL-P-22985, Type II, Class 4. Molded black thermoset

plastic per MIL-M-14F.

MIL-TYPE 1/4" TWIN PHONE PLUGS

Number 415

Number 412

Number 411 Number 414

Part No. Conductors Terminals "Typical Mating Jack1" Mil No. Notes

411 2 Screw MT388 M642/9-1 Provision for internal cord clamp (not included)

412 2 Screw MT388 --- MILPJ289. Similar to WECo289B

414 3 Screw MT389 --- 6-circuit plug, 2 electrically-independent 3 conductor

fingers, .25" fingers. Provision for inter nal cord clamp

(not included) Similar to WECo 338A. 425A-3

415 3 Screw MT332B &1, MT342B --- 6-circuit plug, 2 electr ically-independent 3 conductor

fingers, one .25" finger, one .206" finger. Provision for

internal cord clamp (not included)

1. Switchcraft Par t Numbers. See Jacks Section for other mating jacks.

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

142

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MIL-TYPE 1/4"EXTENSION JACKS AND TELEPHONE PATCH ADAPTERS

FEATURES

Cable jack meets requirements of Specification MIL-J-641(A), Type

Number JJ-026. Mates only with MIL-type plugs PJ-054 and PJ-540.

Switchcraft 430.

SPECIFICATIONS

Body and Terminal Screws: Copper alloy, natural finish.

Springs: Punched from special copper alloy.

Stack Insulation: Rigid plastic spacers Rigid plastic tubing.

Handle: Same as plug handle above.

Stack Screws: Stainless steel.

FEATURES

Compact patch adapters convert standard full-size phone jacks to

standard miniature phone jack connections with maximum

convenience and reliability at a minimum cost. Eliminates

cross-patching problems and need for combination patch cords with

standard phone plug on one end and a miniature phone plug on the

other. Adapters are 100% compatible with Switchcraft®

telephone type and military phone jacks and miniaturized

tini-telephone patching system components, as well as equivalent

industry standard phone plugs.

TAD2 – 2-conductor adapter. Plug finger meets specifications for

MIL plug PJ-047 (MIL-P-642). Fits Switchcraft T-Jax®, M-Jax®,

MIL-approved MT-Jax®, and other industry-standard phone jacks

with .250" inside diameter sleeves. The .552" diameter handle

accommodates jacks on .625" centers. For quick identification,

TAD-2 is stamped on the blue handle - will not wear off with

constant use. Miniature 2-conductor jack built into plug body,

accepts miniature phone plugs with .173" diameter fingers, such

as Switchcraft tini-telephone®plugs, Series TT200 and TT250,

and other standard miniature telephone plugs. TAD3 is a

3-conductor version of TAD2. Finger configuration meets

requirements of PJ-051 (MIL-P-642). Finger incorporates dead

ring to minimize plug and jack wear. Blue handle has diameter

of .444".

MIL-TYPE 1/4" EXTENSION JACKS

Part Typical Mating Handle MIL

Number Conductors Terminals Plug1Handle Part Number Part Number

820 2Screw2, 3 430 Black M1015 M641/4-1

1. Switchcraft Par t Number See Jacks Section for mating jacks. 2. Switchcraft replacement screw. P1070, Terminal P1069 (2 each required)

3. See previous page for strain relief clamp.

TELEPHONE PATCH ADAPTERS

SPECIFICATIONS

Tip Rod, Ring, Sleeve Body and Screws: Copper alloy,

natural finish.

Insulation: Injection-molded plastic.

Jack Springs: Formed copper alloy.

Screw, Spring Retaining:

TAD2 - #2-64, steel. Part Number P1616 (one required).

TAD3 - #2-64, brass. Part Number P1070 (two required).

Ring Insulations (TAD3 only): Kraft paper sleeve.

Handle: Molded blue thermoplastic with die-stamped

identification legend.TAD2 Handle, (Par t Number M1487),

and Retaining Screw, (Par t Number T1677), one required.

TAD3 Handle, (Par t Number M1488), and Retaining Screw,

(Par t Number T1990), one required.

TAD2

2-conductor TAD3

3-conductor

Number 820

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

143

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MINIATURE TELEPHONE PLUGS

.173" MINIATURE PHONE PLUGS FEATURES

2- and 3-conductor miniature non-shorting telephone plugs

designed for use with TT-Jax®, Unijax®, and other phone jacks

with a .176" inside diameter bushing. Approximately 1/2 the

size of standard phone plugs, yet retains the uniformity,

dependability and quality of MIL-type phone plugs.

TT-Plug®Miniature Telephone Plugs are the first to offer

2- and 3-conductors in an attachable type with twist handles

for quick assembly. Series TT250 phone plug is available with

red or black handles. Other color handles available on special

order .Also av ailable with nic k el-plated plug fingers .(Add “N”to

par t number : 253N, 254N).

The TT253NC and TT254NC off er the same nickel-plated plug

fingers as the ‘N’ versions, but also includes cable clamps and

solder terminals for easy assembly.

Plugs feature a one-piece tip rod, r ing and a one-piece sleeve

with integral plug body, assembled together into a mold as

inser ts. Providing complete continuity of thermoplastic insula-

tion between tip rod, ring and sleeve. Internal interlock of all

parts prevents shifting and shorting under extreme rugged

usage.

Internal 12-24 threads in end of plug body are intended for

threading over outer jacket of a patch cord to provide a supe-

rior cable anchor.

Patch cords such as Switchcraft Series TT700 (or other .216"

diameter cable) are easily attached to Series TT250 by screw

terminals.

FEATURES AND BENEFITS

• Designed for pro audio applications

• 3 Conductor

• .173" (4.40mm) plug finger diameter

• One-piece tip rod ensures high reliability

• Complete continuity of thermoplastic insulation

between conductors

• Internal keying of all parts preventing shifting

and shorting

• Solder terminals for easier termination and assembly

• Large cable clamp for shield termination and strain relief

• Black or red handles

SPECIFICATIONS

Tip Rod, Ring, Sleeve and Body: Copper alloy,

natural finish.

Terminals and Terminal Screws: Copper alloy,

natural finish.

Insulation: Thermoplastic. Handle: Molded plastic

MINIATURE TELEPHONE PLUGS

TT253NC

TT251 and TT252 TT253 and TT254

Removing handle from plug body can be

easily accomplished by lightly squeezing

the knurled area of the handle and

twisting 30° counter-clockwise.

Part Handle Handle

Number Conductors Terminals Color Part Number Description

TT251 2Screw Black T2302

TT252 2Screw Red T2315

TT253 3Screw Black T2307 Mil-type M642/13-1

TT253N 3Screw Black T2324 Nickel-plated plug

TT253NC 3Solder Black T2324 Nickel-plated plug,

tinned solder terminals

TT254 3Screw Red T2301 Mil-type M642/13-2

TT254N 3Screw Red T2325 Nickel-plated plug

TT254NC 3Solder Red T2325 Nickel-plated plug,

tinned solder terminals

2P2003 3Screw None None

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

144

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

.173"MINIATURE TELEPHONE PLUGS BANTAM TYPE

FEATURES

Miniature telephone twin plugs with two 2-conductor or two

3-conductor fingers, designed to mate with TT Twin-Jax®,

TT-Jax®, and other phone jacks with a .176" inside diameter

bushing and compatible tip and ring springs. Approximately

1/2 the size of standard phone plugs; yet retains uniformity,

dependability of high-quality phone plugs. The phone plugs

are exceptionally light, small and rugged. Plug fingers can

easily be removed and replaced.

• Minimum Space: Plugs fit .313" centers, horizontally

or vertically.

• Self-Aligning: Plug fingers compensate for minor

variations in jack spacing.

• Polarizing: Handle notches identify location of each finger.

• Tip Monitoring: Handle ports permit probe insertion to

monitor tip circuits.

• Terminating and Looping Plugs: OEMs can fabricate

cross-wired plugs, i.e., tip-to-sleeve, tip-to-ring, etc.,

according to individual requirements. OEMs can also

wire-in resistors, RCL networks, etc. for standard and

special terminating applications. Switchcraft will build

looping and terminating TT-Twin Plugs on special order,

where quantities warrant.

• Sleeve Plugs: For looping, terminating and single cable

applications, sleeve plugs seal off unused handle open-ing(s).

Sleeve plugs also make a bridged (common) sleeve

connection by holding braided shield in place in second

plug.On special order, TT-Twin Plugs can be supplied

with one 2-conductor finger and one 3-conductor finger.

• Ease of Assembly/Disassembly: Refer to illustration below

for assembly/disassembly procedure; no handle retaining

screws required. Tip and ring terminations are screw-type

screws supplied).

SPECIFICATIONS

Tip Rod, Ring, Sleeve and Body: Copper alloy,

natural finish.

Terminals and Terminal Screws: Copper alloy,

natural finish.

Insulation: Thermoplastic.

Handle, Sleeve Plugs: Molded plastic.

1. DISASSEMBLY: Place plug on edge as shown.Push down

and back on metal lip on finger (inside notch) with small

screwdriver and slip plug finger out of handle. Turn plug

over and repeat for other finger.

2. CABLE INSTALLATION: Fold braided shield on cable back

over insulation.Insert leads through rear of plug finger, and

screw finger (clockwise) onto cable with twisting motion

until lead terminations lineup with threaded tip and/or ring

openings. Fasten terminals on both fingers with screws

provided.

3. To bridge sleeves (common connection), place free end of

braided shield in remaining finger sleeve opening. Press

sleeve plug firmly in place.

TT261:Two electrically-independent 2-conductor fingers in a blac k

handle.Can be used with single or dual cables f or independent tip

circuits with common sleeve or separate sleeve circuits.

Typical Handle

Part Mating Part MIL Type

Number

Cond. Terminals Jack

Handle Number Number

TT261 2TT31 Black T2300-2 –

TT263 3TT32B Black T2316 M642/13-3

Screw

1.TT-Twin Plug plugs can be supplied with one, 2-conductor plug finger and

one, 3-conductor plug finger in the same handle (on special order).

2. Switchcraft Par t Numbers. See additional mating jacks in this section.

3. Switchcraft Replacement screw P2240, Terminal P2642.2 each required

with 2-conductor twin plugs; 4 each required with 3-conductor twin plugs.

4. Replacement Hole Plug Switchcraft T2318 (Black) T2319 (Red).

TT261

TT263

NOTCH BRAIDED

SHIELD

LIP

FINGER

NOTCHLIP ON

FINGER

GROOVE INTERNAL RIB

4. ASSEMBLY: Align grooves in fingers with internal handle

ribs and inser t fingers into rear of handle. Push fingers in

until lips or rear of fingers snap into notches on handle.

.173" MINIATURE TELEPHONE PLUGS BANTAM TYPE

TT263: 6-circuit plug consists of two electrically-independent

3-conductor fingers with black handle. Can use single or dual

cables for two electrically-independent 3-conductor fingers or

common tip, ring and/or sleeve circuits.

TT263

1. 2. & 3.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

145

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

1/4" COMMERCIAL PHONE PLUGS

2-CONDUCTOR PLUGS PART NUMBERS

Part

Number

240

◊C240

245

◊C245

250

255

270

◊C270

280

281

285

288

285L

2P1298

◊2P1495

Terminals

Screw3

Screw3with

Cable Clamp

Screw3

Screw3with

Cable Clamp

Solder Lug &

Cable Clamp

Screw 3

Screw3with

Cable Clamp

Solder Lug &

Cable Clamp

Solder Lug &

Cable Clamp

Screw3

Typical

Mating Jack2

Handle*

Black

Red

Black

Red

Shielded

Shielded1

Shielded4

Shielded4, 5

Shielded1

Shielded4, 5, 6

Handle Part

Number

◊M1002

◊M1003

◊M1002

◊M1003

Handle:

T10581

Insulator:

A10071

T2323

3-CONDUCTOR PLUGS PART NUMBERS

260

267

269

290

297

◊2P1248

Screw

Solder Lug &

Cable Clamp

Screw3

Solder Lug &

Cable Clamp

Solder Lug &

Cable Clamp

12B

Black

Red

Shielded

◊M1002

◊M1003

Handle:

T10581

Insulator:

A10071

* Additional plug handle colors available (P2714) green, (M1111) blue,

(M1235) gray. Fits any plug on which Numbers M1002, M1003 are standard.

1.Wide insulator between tip and sleeve allows use of 2-conductor plug in

3-conductor jack without shorting.

2. Switchcraft Par t Numbers. See Mating Jacks Section.

3. Replacement Screw Par t Number P10292 (2-conductor plugs require

2 screws; 3-conductor plugs require 3 screws).

4. Unassembled.

5. Larger cable clamp to accommodate larger diameter cables.

6. Handle has .375" (9.53mm) diameter hole to accommodate larger

diameter cables.

◊Special order only. Contact Switchcraft.

2-CONDUCTOR LITTEL-PLUG®PLUGS 3-CONDUCTOR LITTEL-PLUG®PLUGS

Numbers 240, 245,

250, 255 (typical) Numbers 280, 281,

285, 285L, 288 (typical) Number 260 (typical)

Without Handle

Number 290 (typical)

1/4"COMMERCIAL PHONE PLUGS – LITTEL-PLUG PLUGS

FEATURES

• Heavy duty machined copper alloy handle (shielded

versions), tip and body for unsurpassed r uggedness.

• Bright nickel plating on exterior surfaces will not chip

or corrode.

• Solder terminals are tin electroplated for ease of soldering.

• One-piece tip rod staked into tip terminal ensures

electrical continuity

• Heavy duty cable clamp provides secure strain relief.

• The proven industry standard phone plug for audio

applications. Beware of imitations!

• Shielded handle versions recommended for applications

where electromagnetic interference and physical abuse

may occur.

SPECIFICATIONS

Sleeve,Tip and Body: Nickel-plated copper alloy.

Terminals: Solder lug - Tinned copper alloy.

Screw: Tin-plated (screws size 3-48).

Handles: Molded - black or red plastic. Shielded - machined

Nickel-plated copper alloy. Tubular insulator inside handle.

No. 280 typical – shown with solder lug terminals,

cord clamp and shielded handle.

No. 280 typical – shown with screw-type terminals,

plastic handle.

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

146

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

1/4"COMMERCIAL PHONE PLUGS

Switchcraft®commercial 2- and 3-conductor phone plugs are

available with a logo handle in addition to the plain handle. The

Switchcraft®name appears prominently on the shielded handle

so the plugs can no longer be easily confused with “copycat”

plugs f ound on the market today. Knurling on handles provides a

convenient, positive fingertip grip for connect and disconnect.

Plugs are available in the following popular variations:

1. 1/4" diameter finger, 2-conductors.

2. 1/4" diameter finger, 3-conductors.

3. .206" diameter finger, 2-conductors.

Plug handles accept cable up to .290" diameter.

SPECIFICATIONS

Sleeve: Tip and Body: Plated copper alloy.

Terminals: Solder lug: Copper alloy, electro-tinned;

Screw:Tin-plated (screw size #3-48).

Handles: Nickel-plated zinc (tubular insulator inside handle).

1/4" COMMERCIAL PHONE PLUGS (continued)

PART NUMBERS

NOTE: Plugs have 1/4" finger diameter unless otherwise specified.

1. Other mating plugs are available.

2. Replacement screw, Par t Number P10292 (2-conductor requires 2 screws; 3-conductor requires 3 screws).

No. 570 (Typical) No. 590 (Typical)

Logo Plain Typical

Handle Handle Description Mating Jack

2-CONDUCTORS

570 270 Screw terminals. Shielded handle.

580 280 Solder lug & cable clamp. Shielded handle.

581 281 Solder lug & cable clamp. Shielded handle. Unassembled.

585 285 Solder lug & cable clamp. Shielded handle. Unassembled. Larger cable clamp 11

accommodates larger cables.

588 288 Solder lug & cable clamp. Shielded handle.Wide insulator between tip and sleeve

makes possible use as a 2-conductor plug in 3-conductor jack without shorting.

S580 S280 Solder lug & cable clamp. Shielded handle. Plug finger has .206" diameter. S11

3-CONDUCTORS

590 290 Screw terminals. Shielded handle. 12B

597 297 Solder lug & cable clamp. Shielded handle.

598 298 Solder lug & cable clamp. Shielded handle. Locking feature. 12B, 133

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

147

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

1/4" COMMERCIAL PHONE PLUGS (continued)

Popular general purpose plug fits all standard jacks.Available

in both 2- and 3-conductor types. Two-conductor plugs

available with black or red molded plastic, or 3 different

lengths of brass nic kel-plated (shielded) handles .2-Conductor

Special Militar y Plugs are also available.

FEATURES

• 1-piece tip rod staked into tip terminal insures tightness

of plug.

• All essential conducting members are brass with exter nal

par ts nickel-plated.

• Ter minal screws: broad-headed. In production quantities,

screws may be eliminated and terminals hot-tinned for

easier soldering of wire leads to ter minals (special order).

• Screw terminals have grooves which accommodate

1 or 2 cord tips.

• Thermoplastic handle insert for greater insulation.

• Plugs accept up to .25" maximum diameter cable

(parallel or shielded cable).

SPECIFICATIONS

Sleeve,Tip and Body: Nickel-plated copper alloy.

Terminals: Solder lug: copper alloy, electro-tinned.

Screw: steel, tin-plated.

Handles: Shielded: Nickel-plated copper alloy.

Molded: black or red plastic.

2-CONDUCTOR/PLASTIC OR

SHIELDED HANDLES

Part

Number

703

160

◊2P1251

1701

182QB

182QBD

1843

184L4

Terminals

Screw

(Replacement

Screw Part No.

P10013)

2 required

Solder Lug &

Cable Clamp

Typical

Mating Jack2

11 or

Z15J

Handle

Black

Shielded

Without

Handle

Shielded

Handle Part

Number

M1001

Handle: T10141

Insulator: A10063

Handle: T10451

Insulator: A10061

Handle: T112311

Insulator: A10064

Handle: T10141

Insulator: A11372

T2322

1. 2-piece shielded handle with built-in cable clamp for .25" diameter cable.

Handles: Number T11231, handle; Number T11241, cap; see above for

insulating tube; Number T1125, rubber washer.

2. Other mating plugs are available.

3. Handle has .380" (9.65mm) diameter hole to accommodate

.375" diameter cable.

4. Handle has .451" (11.51mm) diameter hole to accommodate

larger diameter cables.

Number 170, 181Numbers 70, 184

Number 160Number 40

Number 184

Number 170

Number 160

Number 40

1/4"COMMERCIAL PHONE PLUGS

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

148

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

SILENT-PLUG AND LUG PLUG PHONE PLUGS

Silent-Plug plugs have unique circuit-closing device—

stops hums, squeals and pops when plug is removed

from jack. One-piece tip rod assembly insures plug

quality. Utilizes cables up to .25" diameter (parallel or

shielded cable). U.S. Patent No. 2,664,475.

SPECIFICATIONS

Sleeve,Tip and Body: Nickel-plated copper alloy.

Terminals: Copper alloy, tin-plated.

Screw: Cadmium plated (screws size 3-48).

Handles: Shielded machined copper alloy nickel-plated.

Tubular insulator inside handle.

Similar to Littel-Plug phone plug. Same molded handles as

used on Littel-Plug; metal handle, bright nickel-plated, only

1" long. Fits all standard jacks. See drawing for details.

SPECIFICATIONS

Sleeve,Tip and Body: Nickel-plated copper alloy.

Terminals: Solder lug: copper alloy, tin-plated.

Screw: plated steel.

Handles: Shielded: Nickel-plated copper alloy.

Molded: black or red plastic.

SILENT-PLUG PHONE PLUGS

LUG®-PLUG PHONE PLUGS

Part

Number

172

181

182

Terminals

Screw

(Replacement

Screw Part No.

P-1011-3)

2 required

Solder Lug and

Cable Clamp

Typical

Mating Jack

Handle

Shielded

Shielded2

Handle Part

Number

Two-Piece1Ins.

Tube A-1006-3

Two-piece1Ins.

Tube A-1137-1

T-1014-1 Handle,

A-1137-2 Ins. Tube

1. 2-piece shielded handle with built-in cable clamp for .25" diameter

cable.Handles: Number T1123-1, handle; Number T1124-1, cap; Number

T-1125, rubber washer. 2. Mylar tube insulation for greater protection.

No. 172

2-CONDUCTOR PLUGS

Part

Number

350

2P-1216

380

Terminals

Solder Lug

Typical

Mating Jack1

Handle

Black

Shielded

Handle Part

Number

M-1002

Handle: T-1060-1

Insulator: A-1007-2

1 Switchcraft part numbers. See Jacks Section for additional mating jacks.

2-CONDUCTOR PLUGS

Nos. 350, 351, 355 No. 380

INSULATING

TUBE ON #380

2-Conductor “Silent Plug”, No. 172 No. 181 No. 182

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

149

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

AUDIO LOUDSPEAKER PLUGS AND HEAVY DUTY 1/4"PHONE PLUGS

The 187 series 1/4" phone plugs are similar to the

Switchcraft®184 plugs, except that they offer an attractive

tapered handle with a snap-in flex relief. Other features include:

• Larger tip terminal to accommodate wire sizes up to 14 AWG.

• Choice of Satin nickel or black finish.

• Black flex relief bushing can be specified in three different

cable diameter openings for maximum reliability of cable.

• Plug is rated at 15A rms (maximum) for use with audio

loudspeaker applications.

SPECIFICATIONS

Sleeve,Tip and Body: Nickel-plated copper alloy.

Terminals: Solder lugs: tinned copper alloy;

Screw: tin-plated.

Handles: Die-cast zinc. Satin nickel or black finish.

Cable Relief Bushing: Black (thermoplastic elastomer).

AUDIO LOUDSPEAKER PLUGS

1. Other mating plugs are available. See Jacks Section.

• Switchcraft’s 188 is more heavy-duty than

our competitor's biggest 1/4" commercial

phone plugs.

• Large cur ved tip solder terminal makes it

easier to solder to heavy gauge wires.

• Longer sleeve terminal allows more room

to make sleeve solder connections.

• Extra-large cable clamp securely grips

cable of up to .450" in diameter.

• Will easily accommodate some varieties of

four conductor 14 gauge wire and parallel

two conductor 12 gauge wire.

• Bendable tab on sleeve ter minal makes

termination easier by holding down cable

while soldering. In addition, such mechanical

retention makes for a superior solder

connection.

• Will handle up to 15 A. rms (maximum).

(continued on next page)

SERIES 187

Number 187BL (Typical)

HEAVY DUTY 1/4" COMMERCIAL PHONE PLUGS

SERIES 188 Plug

Part Number Cable

Relief Typical

Nickel Black Bushing Mating

Finish Finish diameter (inch) Jack1

187 187B .3 to .33 (regular)

187L 187BL .3 to .355 (large) 11 or Z15J

187D 187BD .2 to .30 (small)

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

150

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

HEAVY DUTY 1/4"COMMERCIAL PHONE PLUGS

SPECIFICATIONS

Contact Resistance (typical *D.O.M.J.):< 0.020 ohms.

Dielectric Withstand Voltage: 500 VAC (minimum).

Insulation Resistance @ 500 VDC: 2,000 megohms

(minimum).

Insulation Resistance (after MIL-STD-202 Salt Spray):

1,000 megohms (minimum).

Working V oltage: 250 VAC , 140 VDC.

Current Carry @ Working Voltage For 188 Plug

(typical *D.O.M.J.): 15.0 AMPS.

Current Carry @ Working Voltage For 299 Plug

(typical *D.O.M.J.): 6.0 AMPS.

Insert/Withdrawal Force: *D.O.M.J..

Soldering Requirement: ANSI/J-STD-001.

Temperature Rang e: -40° to + 85° Centigrade

U.L. Component Recognition File No.: E118169.

Life: *D.O.M.J.

Maximum Cable Size For 188 Plug:

12 AWG stranded, up to .450" diameter.

Maximum Cable Size For 299 Plug: .290" diameter.

MATERIALS

Tip: Nickel-plated copper alloy.

Sleeve: Nickel-plated copper alloy.

Handle: Nickel-plated copper alloy.

Tip T erminal: Copper alloy, electro tin-plated.

Cable Clamp: Copper alloy, electro tin-plated.

Insulators For 188 Plug: Ther mojet plastic,

thermoplastic, ther moplastic film, P.P.O.

Insulators For 299 Plug: Thermoplastic,

thermoplastic film, glass epoxy.

HEAVY DUTY 1/4" COMMERCIAL PHONE PLUGS (continued)

SERIES 299 PLUG

*D.O.M.J. – Dependent On Mating Jack

Part

Number

299

Maximum

Cable Size

.290" Diameter

Mating

Jack

Z15J

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

151

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

1/4"AND .206"COMMERCIAL PHONE PLUGS

FEATURES

For applications requir ing polarization (use of plugs of different

sizes) to prevent insertion of incorrect equipment Littel-Plug®

phone plugs featuring a sleeve and tip diameter of .206" are

available. Mate with Number S128 Extension Jax®and S11

Littel Jax®jacks. Number S260 used interchangeable with

Military Type M642/51 (Switchcraft Number 480) plugs. Mate

with jacks S12B, S13B, M444, MT342B, MT344B and others.

3-CONDUCTOR/PLASTIC OR

SHIELDED HANDLES PHONE PLUGS FOR

POLARIZED CONNECTIONS

1/4" COMMERCIAL PHONE

PLUGS (continued) .206" COMMERCIAL

PHONE PLUGS

Number 190

Number 60

Part

Number

◊60

◊90

190

190A,190B

& 190BL

Terminals

Solder Lug

Typical

Mating Jack2

12B

Handle

Black

Shielded

Handle Part

Number

M1001

T10451

Handle: T10141

Insulator: A10063

2-piece1

2-CONDUCTOR PLUGS PART NUMBERS

Part

Number

S250

S280

Terminals

Solder Lug &

Cable Clamp

Typical Mating

Jack1

S11

Handle

Black

Shielded

Handle Part

Number

M1002

T10581

A10071

3-CONDUCTOR PLUGS PART NUMBERS

S260

S267

Screw

(Replacement

Screw Part No.

P10292)

2 required

Solder Lug &

Cable Clamp

S12B Black M1002

1. Switchcraft®mating jacks.

Numbers S250, S255

1. 2-piece shielded handle with built-in cable clamp for .25" diameter cable.

Handles: Number T11231, handle; Number T11241, cap; Number

A10064, insulating tube; Number T1125, rubber washer.

2. Other Mating Plugs are available.

◊Special order only. Contact Switchcraft.

Number 60

Number 90 Number S260

Number 190A

.206" Diameter

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

152

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

1/4"MITI-PLUG®AUDIO PLUGS

FEATURES

• 2-conductor phone plug with full shielding and resistance to

extremely rough usage for electrified audio instruments such

as amplifiers, synthesizers power heads and speaker systems

requiring high-quality audio plugs.

• 3-WAY CABLE STRAIN/STRESS RELIEF: For hours of

trouble-free operation under heavy and abusive use. Plug body

internally threaded for screw-on strain relief for cables from .29"

to .30" diameter, and an additional clamp for additional relief

(and for smaller cables). A heavy copper alloy-plated steel

spring at point of entry to plug keeps cable from folding and

pinching. Flex relief spring recommended for cables with

diameters of .265" maximum only.

• TERMINATING: Tip wire soldered to tip–braid folded back

and secured with cable clamp.

• IDENTIFICATION: Customer or OEM name of logo can be

applied to plastic handles f or a minimal charge for personalization.

(Contact Switchcraft for details).

• SPECIAL HANDLE COLORS: Plastic handles molded in

custom colors on special order. Contact Switchcraft for details.

SPECIFICATIONS

Tip Rod & Body: Copper alloy.

Handle: Copper alloy or plastic (black).

Flex Relief Spring: Plated spring steel.

(Par t No. P2848).

Strain Relief Clamp: Plated steel.

(Par t No. P2380).

Insulation: Thermoplastic, glass reinforced.

1/4" MITI-PLUG®AUDIO PLUGS

Part

Number

◊173

◊174S

◊175

◊176S

◊177S

◊178

◊179

Handle

Black plastic

Copper Alloy

Black Plastic

Red Plastic

Black Plastic

Red Plastic

Flex Relief

U-Clamp

Spring

None

Spring

None

Handle Part

Number

M1483

T2313

M1483

1. Other mating plugs are available.

◊Special order only. Contact Switchcraft.

2-CONDUCTOR PLUGS

Number 174S

Typical

Mating Jack1

No. 174S

No. 176S

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

153

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

1/4"FLAT PLUG PHONE PLUGS

Part Typical Handle

No. Terminals Mating Jack1Handle Part No.3

220 Screw Black M1005

225 Screw Red M1006

227 Solder Lug Black M1005

229 Solder Lug Red M1006

2P1509 Screw Less Handle –

FEATURES

• Ideal where conventional long handled plugs are not

suited to design of equipment. “Chassis-hugging” phone

plugs allow cables to be brought out at right angles to

equipment.

• Removable plastic cap for easy assembly of wire leads

to either screw or solder lug terminals. Adapter clips on

types 220 and 225 make it convenient to clamp standard

phone tips to terminals.

• Terminals and body of plug mechanically interlocked,

eliminating probability of any shifting.

• Cover is black or red plastic; plug body is a rugged

assembly of all metal parts.

• One-piece tip rod staked into tip terminal to insure

tightness, no disassembly of tip during use of plug.

• High grade insulation.

• Terminal identification permanently stamped into base

plate adjacent to each terminal. Letter “T” denotes tip

connection; “R” denotes ring sleeve; “S” terminal is the

sleeve or body connection (no identification on types

228, 238).

• Cover molds designed so customer’s name or trademark

inser ts can be added. Call for details.

SPECIFICATIONS

Tip Rod and Sleeve: Nickel-plated copper alloy.

Terminals: Tinned copper alloy.

Handle: Black or red plastic. Numbers 228 and 238,

steel,nickel-plated.

Part Typical Handle

No. Terminal Mating Jack1, 2 Conductor Handle Part No.

228 Solder 11 2

238 Lug 12B 3

1/4" FLAT PLUG PHONE PLUGS

2- OR 3-CONDUCTOR/SHIELDED HANDLE

1. Switchcraft Par t Number ; see jack section for additional mating jacks.

2. Switchcraft replacement Part Number P10292.2 screws required per plug.

Clips for phone tips. Part Number S1832.

3.Three screws (Number P1039) required to mount handle.

Shielded S3067

1. Nickel plated steel handle.Two screws (Part Number P15823) required to

mount handle.

2. Other mating plugs are available.

3. Accommodates cables from .219" outside diameter to .250" outside

diameter Ideal for music equipment use.

Part Typical Handle

No. Terminals Mating Jacks1Handle Part No.4

◊230 Screw3Black M1005

◊235 Screw Red

◊237 Solder Black M1005

◊239 Solder Red

◊S230 Screw3S12B2Black M1005

3-CONDUCTOR/PLASTIC HANDLE

.206" DIAMETER SLEEVE AND TIP

1. Switchcraft Par t Number Other mating plugs are available.

2. Part Number S230 is the commercial version of military Type PJ068

(Switchcraft Number 480) plug. Mates with S12B, S13B, M444, MT342B,

MT344B Jacks and others. Other mating plugs are available.

For applications where it is desirable to polarize, use plugs of different sizes

to prevent inser tion of incorrect equipment. Sleeve and tip diameter of these

plugs is .206" Mates with S830, S1230 Extension-Jax®jacks and S12B,

S13B Littel-Jax®phone jacks.

3. Switchcraft Replacement Part Number P10292.3 screws required.

4.Three screws (Number P1039) required to mount handle.

◊Special order only. Contact Switchcraft.

Series 220 Series 230

Series S230 No. 238

12B

1/4"FLAT PLUG PHONE PLUGS

Series 220 Series 230 No. S-230 No. 238 (typical)

2-CONDUCTOR/PLASTIC HANDLE

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

154

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

RIGHT-ANGLE AUDIO PHONE PLUGS

RIGHT-ANGLE AUDIO PHONE PLUG

Typical

Part Mating

Number Description Jack

236 3-conductor 1/4" right-angle 12B, 13B

commercial plug. 112B, 113B

226 2-conductor 1/4" right-angle 11, 12A

commercial plug 111, 112A

FEATURING 3-PIECE CONSTRUCTION

AND FAST TERMINATION/ASSEMBLY

Switchcraft's 2- or 3-conductor right-angle audio phone plugs

are designed for OEMs and users of commercial phone plugs.

The plugs offer large terminals for easy wiring, and only three

pieces to assemble - handle, insulator and finger/housing

assembly and rugged reliability for stable, long-term,

trouble-free operation.

FEATURES

• Easy Ter mination: Large terminals accept up to 16 AWG

wiring (cables up to .25 inch diameter)

• 3-Piece Assembly: Screw on the handle for quick and

easy assembly; minimizes labor costs.

• Rugged: All metal exterior construction.

• Low Profile: Only 1/2 inch wide. Ideal for crowded,

multi-channel panels. Right-angle handle minimizes

space required behind equipment.

• Knurled Handles: Positive grip during connect/disconnect.

• Rugged Cable Clamp: Isolates pulling and twisting strains.

SPECIFICATIONS

Tip, Rod and Handle: Nickel-plated copper alloy.

Housing/Sleeve: Nickel-plated.

Tip T erminal: Tin-plated copper alloy.

Sleeve (Clamp) Terminal: Tin-plated steel.

Insulation: Thermoplastic.

Dielectric Withstanding Voltage: 500 Vac.

Insulation Resistance: 50,000 Megaohms minimum (initial).

Operating T emperature: -20°C to +65°C.

226

No. 236

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

155

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

1/4"LOCK-EXTENSION JACKS AND PLUGS

FEATURES

Modified Littel-Plug®phone plug, 2- or 3-conductor, with

coupling ring that can be threaded to thread projection of

mating panel jack or to threaded end of the Lock-Extension

Jax®.Locks connection after plug has been fully inserted

into its mating panel jack or Extension Jax®.

Lock-Plug®makes proper contact to mating jack without

tightening or attaching coupling ring, when rapid disconnect

ma y be desired.Lock-Plug fits an y standard jac k with 3/8".-32

thread bushing with .094" of the bushing exposed. Lock-

Extension Jax also will mate properly with standard phone

plugs, where no “lock” requirement exists.

SPECIFICATIONS

Lock-Plug Tip Rod, Body, Handle and Coupling Ring:

Nickel-plated copper alloy.

Terminals: Brass, electro-tinned. Solder lug design,

cable clamp part of sleeve ter minal.

Insulation: Rigid plastic.

LOCK-EXTENSION JAX®

Housing (or Sleeve) and Handle:

Nickel-plated copper alloy.

TERMINALS:

Sleeve: Plated steel.Tip and Ring:

integral part of tip and r ing springs.

Springs: Spring tempered copper alloy.

Insulation: Molded thermoplastic insert.

Rigid plastic terminal washer.

1/4" LOCK-EXTENSION JACKS AND PLUGS

Typical

Part Mating Handle

Number Cond. Terminals Jack Part Number Notes

282 2Solder 12A

Lug & T10581 Similar to Switchcraft Number 297 Littel-Plug

298 3Cable 12B, 133 A10071 except with coupling ring.

Clamp

Typical

Part Mating Handle

Number Cond. Terminals Plug Par t Number Notes

Solder

Lug & Sleeve terminal has cable clamp. Similar to

133 3Cable 298 T1485 Switchcraft®Number 131 Extension-Jax®.

Clamp

LOCK-EXTENSION JAX®

LOCK-PLUG

Number 133 Number 298

282133

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

156

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

3.5MM HEAVY DUTY STEREO PLUG

3.5MM STEREO PLUGS

FEATURES

• Heavy duty 3.5mm plugs for audio, instrument,

other applications.

• Large cable clamps for rugged use.

• Available in straight or right angle.

• One piece tip rods for added durability.

• Available in nickel, gold, and black finishes.

• Large solder terminals for easy assembly.

• Standard handle accommodates cable sizes up to 0.290"

Optional ‘S’ versions accommodate cable sizes up to 0.175"

35HDBN - Black Handle, Nickel Plug

35HDBAU - Black Handle, Gold Plug

35HDNAU - Nickel Handle, Gold Plug

35HDNN - Nickel Handle, Nickel Plug

BENEFITS

• One piece tip rod with flat for easy solderability.

• Compliments current line of 3.5 mm jacks.

• Inser t molded plug finger.

• Heavy Duty cable clamp provides better strain relief

for larger cables

• Longer cable clamp for easier plug assembly and more

room for solder connections

• Knurl on the back of handle provides ergonomic gripping

surface to tighten plug

• Tubular insulator included to prevent solder joints

from contacting handle

• Longer handle for improved gripping surface

and easy plug withdrawal from jack

• Large solder terminal for easy solderability

MARKETS

• Audio

• Consumer electronic equipment

• Broadcast studios

• Home recording equipment

• Audio cable assembly manufacturers

• Instrumentation

• Test equipment

SPECIFICATIONS

Contact Resistance: <0.020 ohms

Dielectric Withstand Voltage: - 250 VAC (min.)

Insulation Resistance @ 500 VDC: 2,000 megohms (min.)

Working V oltage: - 250 VAC, 140 VDC

Current Carry @ W orking Voltage: 4 AMPS

Insert/Withdrawal Force: - Typical 2.5/2 pounds

Temperature Rang e: 0° to 66° Centigrade (operating)

Passed MIL-STD-202F Method 107G (Ther mal Shock), and

Method 201 (Vibration)

Life: - 5000 cycles

Maximum Cable Size: - .250? dia.

MATERIALS

Tip Rod: Copper alloy, tin, or gold-plated

Ring: Copper alloy, nickel, or gold-plated

Sleeve: - Copper alloy, nickel, or gold-plated

Handle: Copper alloy, nickel, or gold-plated

Cable Clamp: - C.R.S., tin-plated

Solder T erminal: Copper alloy, tin-plated

Tubular Insulator: Clear plastic

ORDERING INFORMATION

1. Order by part number

2. Contact Switchcraft for more information

3.5 MM HEAVY DUTY STEREO PLUGS

Part Description

Number Plug Finger Handle Notes

35HDNN Nickel Nickel

35HDNNS Nickel Nickel 0.175" handle opening

35HDBN Nickel Black

35HDBNS Nickel Black 0.175" handle opening

35HDNAU Gold Nickel

35HDNAUS Gold Nickel 0.175" handle opening

35HDBAU Gold Black

35HDBAUS Gold Black 0.175" handle opening

35HDRANN Nickel Nickel Right angle

35HDRABAU Gold Black Right angle

35HDRAAU Gold Nickel Right angle

RIGHT ANGLE

35HDBAU

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

157

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

.141"MINIATURE PHONE PLUGS

FEATURES

• Miniature 2-conductor Phone Plug for use with Switchcraft

Tini-Jax®miniature phone jacks. About 1/2 the size of

Switchcraft Littel-Plug®phone plug. Average net weight,

1/8 ounce.

• Various ter minal combinations: (a) Dual purpose sleeve

terminal may be clamped over metal braid or shielded

cables; provides cable anchor. Easily soldered for perfect

electrical connection. (b) Screw terminal design (no cable

clamp) for cable.Ter minals that can be more suitably

connected by screws.

•1-piece tip rod staked into mating terminals; no disassembly

of tip during use of plug.Terminals and body of plug

interlocked mechanically.

• Available in black or red plastic handles or brass nickel-

plated handles for shielding. Can be used with cables up

to .188" outside diameter.

SPECIFICATIONS

Sleeve,Tip and Body: Nickel-plated copper alloy.

Terminals: Copper alloy, electro-tinned. Solder lug or

screw type (Screws #0-80).

Handle: Molded black or red plastic.

Copper alloy, nickel-plated.

.141" MINIATURE PHONE PLUGS

1. Other mating plugs are available.

2. Switchcraft replacement Part Number P1153.2 screws required per plug.

Number 780

Number 750

Part Typical

Number Terminals Mating Jack1Handle Part No.

740 Black M1055

745 Screw2Red M1056

750 Black M1055

755 Solder Lug & 41 Red M1056

2P1384 Cable Clamp Less Handle –

770 Screw2Shielded T13631

780 Solder Lug & Shielded T13631

Cable Clamp

No. 740 No. 750

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

158

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

.097"SUBMINIATURE PHONE PLUGS

.097" SUBMINIATURE PHONE PLUGS

FEATURES

• Subminiature, 2-conductor phone plugs are 1/3 the size

of standard phone plugs, with the uniformity,

dependability, and quality construction of Switchcraft

Littel-Plug®and Tini Plug®phone plugs. 50 W soldering

with 60/40 solder recommended for ter minating.

• Switchcraft’s 852, 853, 857, 858, 882 and 883 have a

wider insulator between the tip and the sleeve.The wide

insulator prevents the tip of the plug from shorting out

between the tip spring and the sleeve of the jack

during inser tion.

Micro-Plug®PLUG - Sleeve terminal incorporates cable

clamp. May be clamped over mated braid to anchor

shielded cable; solders readily for perfect electrical

connection. Terminals and plug body interlocked

mechanically. Accommodates cable up to .125"

Combined length, handle and tip: 1.106" outside diameter,

.250" outside diameter handle.

LOCK Micro-Plug®PLUG - Similar to Micro-Plug plug,

with addition of integral threaded collar that fastens to

bushing of mating jack to prevent accidental disconnect.

Requires at least .05" of exposed and usable thread on

jack b ushing to loc k securely.Ideal for secure connections

in critical medical and sensitive scientific instruments.

Combined length, handle and tip: 1.046". Var ious molded

cable assemblies incorporating Micro-Plug Subminiature

phone plugs with plastic handles are available.

SPECIFICATIONS

MATERIALS

Tip, Rod and Body (also integral Coupling Collar on

Lock Micro-Plug): Nickel-plated copper alloy.

Insulation: Molded thermoplastic.

Sleeve Termination and Cable Clamp:

Tinned copper alloy.

Handle: Anodized aluminum; red, black or natural finish.

MECHANICAL

Life rating: 5,000 inser tion/withdrawals.

Insertion/Withdrawal Force: 1 pound (depending on

mating jack).

ELECTRICAL

Insulation Resistance: > 100 megohms

Dielectric Withstanding Voltage: 250V AC.

ENVIRONMENTAL

Thermal Range: -55°C to +85°C (non-operating);

-20°C to 65°C (operating).

Thermal Shock: Mil-Std 202, Method 107.

Humidity: Mil-Std 202, Method 106.

Salt Spray: Mil-Std 202, Method 101.

MICRO-PLUG

LOCK MICRO-PLUG

1. Switchcraft Par t Numbers. Other mating plugs are available.

Numbers 850, 880

No. 850 (typical)

Number 851

Part Mating Handle

Number Terminals Jacks1Handle Part No.

850 Black T18623

852 Black T18623

855 Red T18622

857 Solder Lug TR2A Red T18622

880 Natural T18621

882 Natural T18621

2P1419 Less Handle –

Part Mating Handle

Number Terminals Jacks1Handle Part No.

851 Black T23123

853 Black T23123

856 Red T23122

858 Solder Lug TR2A Red T23122

881 Natural T23121

883 Natural T23121

No. 851 (typical)

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

159

JACKS AND PLUGS

FAX: 773 792-2129

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

AUDIO ADAPTERS

Part Number 332A (Not shown): 2-cond. phone jack input

to old MC1M-style microphone connector output. Coupling

ring can be screwed back to convert female microphone

connector to male type. Shielded.

Part Number 336A: 2-conductor phone jack input to a

phono plug output. Shielded.

Part Number 336B: 2-conductor phone jack input to phono

jack output. Shielded.

Part Number 340: Two 2-conductor phone jack inputs

connected in parallel to a 2-conductor phone plug output.

Shielded.

Part Number 345A: Phono plug input to a standard

2-conductor phone plug output. Shielded.

Part Number 349A: Phono plug coupler. Phono Extension

Jax®input to phono Extension Jax output. Shielded.

◊Part Number 352A: Stereo to monaural adapter.

3-conductor phone jack input to 2-conductor phone plug

output. Extra-wide insulator prevents accidental damage

should wrong connection be made. Shielded.

Part Number 361A: Phone plug coupler. Standard 1/4"

inside diameter phone jack input to standard 1/4" inside

diameter phone jack output. Ideal for connecting two

cables terminated with 2-conductor phone plugs. Shielded.

Part Number 362A (Not shown): Phone plug coupler.

Standard 3-cond. phone jack input to standard 3-cond.

phone jack output.Ideal for connecting tw o cables terminated

with 3-conductor phone jacks. Shielded.

Part Number 363: Phone jack coupler. Standard 1/4"

2-conductor phone plugs at each end to connect two

cables terminated with phone Extension Jax. Shielded.

Part Number 364A: EIA Standard 2-conductor Tini-Jax®

phone jack input to a standard 1/4" 2-conductor phone

plug output. Shielded.

Part Number 365: EIA Standard 2-conductor Tini-Jax®

phone jack input to a phono plug output. Shielded.

Part Number 370A: 2-conductor EIA Standard Tini-Plug®

phone plug (.141" diameter finger) output to phono jack

input. Adapts standard phono plug to small Tini-Plug.

Shielded.

Part Number 374: 2-conductor phone jack input to a

2-conductor EIA Standard Tini-Plug (.141" diameter finger)

phone plug output. Adapts standard phone plug to small

Tini-Plug.

Part Number 376: EIA Standard Tini-Jax phone jack input

to a 2-conductor Micro-Plug (.097" diameter finger) phone

plug output. Adapts a Tini-Plug phone plug to a Micro-Plug

phone plug.

Part Number 377: Micro-Jax phone jack input to a

2-conductor EIA Standard Tini-Plug (.141" diameter

finger) phone plug output. Adapts a Micro-Plug phone plug

to a Tini-Plug phone plug.

◊Special order only. Contact Switchcraft.

336A

336B

345A

349A

340

AUDIO ADAPTERS

352A 361A

363

364A

365

370A

376

377

374

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

160

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

PHONO PLUGS

3502AAU

3502ABAU

3502A

FEATURES

• Wide variety of styles for a wide range of applications.

• 3502A and 3502RA Series offer solid pin, large solder cups.

• 3558 Series utilize plastic handles for low cost applications.

• 3507 and 3504M have low-loss nylon insulators for

RF applications. Can be used at 1 kW at 30 MHz.

• 3501M and 3501MC have the handle removed for tight spaces

• Options include nickel and gold plated, or black epoxy finishes.

SPECIFICATIONS

MATERIALS

Pin: Nickel or gold plated, copper alloy

Sleeve: Nickel or gold plated, copper alloy

Handle: Nickel or gold plated, or black epoxy finish, copper alloy

(3558 Series: Ther moplastic)

Cable Clamp: Tin, copper alloy

Insulator: Rigid Plastic

ELECTRICAL

Current Carry @ Working Voltage (typical *D.O.M.J.): 6A

Contact Resistance (typical *D.O.M.J.): < 0.20 Ohms

Dielectric Withstanding Voltage: 500 VAC min.

Insulation Resistance @ 500VDC: 2,000 megohms min

Working V oltage: 250VAC, 140VDC

MECHANICAL

Life: *D.M.O.J

Temperature Rang e: -40∞C to +85∞C

*D.M.O.J. –Dependent On Mating Jack

3501MC

3502

35581

35582

35585

3504M 3507 3502RA

3502RAAU

3502RABAU

3501M

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

161

JACKS AND PLUGS

FAX: 773 792-2129

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

PHONO PLUGS

PHONO PLUGS (continued)

Part Description Typical

Number Pin Handle Notes Mating Jack

3502A Nickel Nickel BP Series

3502AAU Gold Nickel BP Series

3502ABAU Gold Black BP Series

3502RA Nickel Nickel Right angle BP Series

3502RABAU Gold Black Right angle BP Series

3502RAAU Gold Nickel Right angle BP Series

35581 Nickel Plastic Red handle BP Series

35582 Nickel Plastic Black handle BP Series

35585 Nickel Plastic White handle BP Series

3502 Nickel Nickel BP Series

3501M Nickel BP Ser ies

3501MC Nickel Same as 3501M except with cable clamp BP Series

3504M Nickel Same as 3507 less cable clamp and handle 3505F

3507 Nickel Nickel For RF applications 3505F

330F1 Nickel 2 inline jacks to 1 male plug, 4" gray shielded cable BP Ser ies

330F2 Nickel1 inline jack, 1 male plug to 1 male plug, 4" gray shielded cable BP S er ies

3507

3502RA

3502A

3501M & 3504M

35581, 33582, 33585

3502

3501MC

JACKS AND PLUGS

* Please visit the product pages on our website for the most up-to-date product information

JACKS AND PLUGS

162

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACKS AND PLUGS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MINIATURE POWER PLUGS

PART NUMBERING and MATING CHART (Power plugs/Power jacks)

Part

Number

760

765

760K

761K

765K

766K

◊2P1515

S760

S765

S760K

S761K

S765K

S766K

2P1624

860

865

Inside

Diameter

.100"

.080"

.050"

Outside

Diameter

.218"

.150"

Length

“L1”

.375"

.475"

.375"

.475"

.375"

.475"

.375"

.475"

.375"

Length

“L2”

1.42

1.7

1.8

1.7

1.8

1.42

1.7

1.8

1.7

1.8

1.42

Locking

Feature

Yes

Tip

Insulator

Black

White

Black

White

Black

Handle

Color

Black

Red

Black

Red

No Handle

Black

Red

Black

Red

No Handle

Black

Red

Handle

Part Number

M1055

M1056

M1055

M1056

No Handle

M1055

M1056

M1055

M1056

No Handle

M1055

M1056

Switchcraft®

Mating Jack1

712A, RAPC712, RASH712, RASM712, PC712A, RA712A

712A, PC712A

L712A, PCL712A

712A, PC712A

L712A, PCL712A

712A, PC712A

722A, RAPC722, RASH722, RASM722, PC722A, RA722A

722A, PC722A

L722A, PCL722A

722A, PC722A

L722A, PCL722A

722A, PC722A

RAPC 732, RASH 732, RASM 732

760K

S760K

760

860

MINIATURE POWER PLUGS

FEATURES AND BENEFITS

• 2-conductor power jacks.

• Hollow center pin available in 3 pin diameters and 2 finger lengths

(See char t below).

• Locking option available for added security in critical applications.

• Molded plastic handles available in black or red.

• Sleeve terminal ser ves as cord clamp.

SPECIFICATIONS

Plug Sleeve and Pin: Nickel-plated copper alloy.

Lockring: Nickel-plated copper alloy.

Lockring Thread Size: 5/16 - 32 UNEF 2B.

Finger Insulator: Molded plastic.

Insulating W ashers: Rigid plastic.

Sleeve T erminal: Copper alloy, electro-tinned.

Handle: Molded plastic.

Handle Thread Size: 5/16 - 24 UNF 2B.

Electrical: Current (Carr y): 5 amps.

ORDERING INFORMATION

1. Order by part number. 2. Contact Switchcraft for more information.

3. ◊Indicates “special order” only.

1See pages 130-134.

761K

INSIDE DIAMETER TOLERANCES (PLUGS)

.050" (.050 - .053)

860/865: 1.27mm (1.27 - 1.35)

.080" (.080 - .084)

S760/S765*: 2mm (2.03 - 2.13)

.100" (.099 - .103)

760/765*: 2.5mm (2.52 - 2.61)

OUTSIDE DIAMETER TOLERANCES (PLUGS)

.150" (.149 - .153)

860/865: 3.81mm (3.78 - 3.89)

.218" (.217 - .221)

S760/S765*: 5.5mm (5.51 - 5.61)

.218" (.217 - .221)

760/765*: 5.5mm (5.51 - 5.61)

*includes locking (k) versions

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

163

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

PROFESSIONAL PUNCHDOWN TERMINAL

PROFESSIONAL PUNCHDOWN TERMINAL (PPT)

Our Patchbays Now Feature the New Professional

Punchdown Terminal (PPT) Our Patchbays Have Just

Rounded A New Corner

Actually, the corners we rounded belong to our patchbays’

revolutionary, new Professional Punchdown Terminal (PPT),

making it perfectly compatible with the industry standard. We

realized that achieving a new industry standard meant we

couldn’t cut any corners to get there.

The PPT design incorporates a split-barrel design and a more

rugged, thicker housing to minimize the impact of repeated

punchdowns. The split-barrel design eliminates the problems

associated with the old “V-shaped” terminal designs.The PPT

design distributes pressure evenly across both sides of the

terminated wire, causing improved wire retention plus more

reliable connections.The serrated teeth in the plastic housing

firmly grip the wires, which also greatly improves wire

retention.With the PPT, multiple wires can be terminated to a

single contact, and a wide range of wire gauges can be used.

Look for Switchcraft’s PPT in our MTP and TTP Series of

audio patchbays, and in our new Backpanel Series.

All Switchcraft audio patchbays incorporate heavy gauge

materials and our high quality nickel-plated, steel framed

jacks. Gold-plated, crossbar contacts come standard!

MATERIALS

Housing: Thermoplastic (UL 94V-0)

Contacts: High strength copper alloy, tin plated

Wire size: Accommodates #22, 24, or 26 AWG,

stranded or solid

Accessories

Part Number Description

K459 PPT replacement kit consists of

15 of each color* (IDC/IDC)

K460 PPT replacement kit consists of

15 of each color (IDC/wirewrap)

PT1LA PPT impact punchdown tool

PT2B Replacement bit for PT1LA tool

*Colors consist of red, black, white, yellow, blue, and orange.

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

164

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

FRONT ACCESS MTPFA/TTPFA SERIES

The Front Access Series offers the end user the ease of

re-terminating patchpoints from the front of the rack as

opposed to the back. A slide out tray allows the user to slide

out the punchdown terminals, and reconfigure the unit. An

easy release mechanism on either side of the unit allows it to

be pushed back into place and easy to g rip loc king nuts tighten

the unit in place.

FEATURES AND BENEFITS

• Easy slide-out tray slides forward for

easy re-termination from the front of the rack

• Available with either 48 MT style or 96 TT style

jacks in a 1RU space

• Attractive, corrosion resistant nickel-plated,

steel frame jacks

• Gold-plated switching contacts reduce

contact resistance, improves reliability

• Extra wide designation strips for easy channel

identification

• Rugged, attractive black epoxy-finished

steel chassis

• Configurations available include nor mals

strapped and normals brought out

SPECIFICATIONS

MATERIALS (JACKS)

Frame: Nickel-plated steel

Bushing: Nickel-plated brass

Tip, Ring and Shunt Springs: Nickel silver with w elded contacts

Assembly Screws: Nickel-plated steel

Welded Contacts: Gold alloy

PANEL

Frame: C.R.S. black epoxy painted

Designation Strips: Black polycarbonate 94V-0

Designation Strip Covers: Clear polycarbonate

Jack Inserts: Ther moplastic 94V-0

MECHANICAL

Life: 30,000 cycles

Insertion Force: 7 lbs. maximum

Withdrawal Force: 1 lb. minimum

Operating: -20°C to +65°C

ELECTRICAL

Jack Contact Resistance: 30 milliohms

initial maximum; 50 milliohms after life

Jack Insulation Resistance: 10,000 megohms maximum

Dielectric Withstanding Voltage: 500V at 60 Hz AC

Working V oltage: 100 milliamps or less; maximum 56.5 VDC

Ordering Information

Part Type of No. of

Number Jack Jacks Description

TTPFA96K1NS TT 96 1.75" High, nor mals strapped

TTPFA96K1NO TT 96 1.75" High, nor mals brought out

MTPFA48K1NS MT 48 1.75" High, nor mals strapped

MTPFA48K1NO MT 48 1.75" High, nor mals brought out

TTPFA96K1NS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

165

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

FRONT ACCESS MTPFA/TTPFA SERIES

FRONT ACCESS MTPFA/TTPFA SERIES (continued)

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

166

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MTP48K WIRED AUDIO SERIES

FEATURES AND BENEFITS

• Unit features 48 MT style jacks in either

1RU (1.75"H) or 2RU (3.5"H) spaces

• All versions utilize AES/EBU wiring for

complete digital compatibility

• Attractive, corrosion resistant nickel-plated,

steel frame jacks

• Gold-plated switching contacts reduce

contact resistance, improve reliability

• Rugged, attractive black epoxy-finished

steel chassis

• Extra wide designation strips for easy

channel identification

• 1RU version configurations include nor mals

strapped and normals brought out

• 2RU version configurations include nor mals

strapped, normals brought out, and sleeve

normals brought out

SPECIFICATIONS

MATERIALS

JACKS

Frame: Nickel-plated steel

Bushing: Nickel-plated brass

Tip, Ring and Shunt Springs: Nickel silver

with welded contacts

Assembly Screws: Zinc-plated steel

Welded Contacts: Gold alloy

PANEL

Front Channel: Black anodized aluminum

Frame: C.R.S. black epoxy painted

Designation Strips: Black polycarbonate 94V-0

Designation Strip Covers: Clear polycarbonate

Jack Inserts: Ther moplastic polyester

MECHANICAL

Life: 30,000 cycles

Insertion Force: 7 lbs. maximum

Withdrawal Force: 1 lb. minimum

Environmental: O°C to +50°C

ELECTRICAL

Contact Resistance:30 milliohms maximum initial

Insulation Resistance: 10,000 megohms maximum

Dielectric Withstanding Voltage: 500 VAC at 60 Hz

Working V oltage: 140 VDC maximum

Current Rating: 100 milliamps

The MTP Series were developed with the AES/EBU digital

standard in mind. All versions are made with 110 Ohm cabling

inside as a standard. Available in a wide variety of configurations.

Ordering Information

Part Type of No. of

Number Jack Jacks Description

MTP48K1NS MT 48 1.75" High, normals strapped

MTP48K3NS MT 48 3.5" High, normals strapped

MTP48K1NO MT 48 1.75" High, normals brought out

MTP48K3NO MT 48 3.5" High, normals brought out

MTP48K3SNO MT 48 3.5" High, sleeve normals out

MTP48K WIRED AUDIO SERIES

MTP48K3NO

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

167

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MTP48K WIRED AUDIO SERIES

MTP48K WIRED AUDIO SERIES (continued)

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

168

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TTP96K WIRED AUDIO SERIES

FEATURES AND BENEFITS

• Unit features 96 TT style jacks in 2RU

(3.5"H) space

• Utilizes AES/EBU wiring for complete

digital compatibility

• Attractive, corrosion resistant nickel-plated,

steel frame jacks

• Gold-plated switching contacts reduce

contact resistance, improve reliability

• Rugged, attractive black epoxy-finished

steel chassis

• Extra wide designation strips for easy

channel identification

SPECIFICATIONS

MATERIALS

JACKS

Frame: Nickel-plated steel

Bushing: Nickel-plated brass

Tip, Ring and Shunt Springs: Nickel silver with

welded contacts

Assembly Screws: Zinc-plated steel

Welded Contacts: Gold alloy

PANEL

Front Channel: Black anodized aluminum

Frame: C.R.S. black epoxy painted

Designation Strips: Black polycarbonate 94V-0

Designation Strip Covers: Clear polycarbonate

Jack Inserts: Ther moplastic polyester

MECHANICAL

Life: 30,000 cycles

Insertion Force: 7 lbs. maximum

Withdrawal Force: 1 lb. minimum

Environmental: O°C to +50°C

ELECTRICAL

Contact Resistance: 30 milliohms maximum initial

Insulation Resistance: 10,000 megohms maximum

Dielectric Withstanding Voltage: 500 VAC at 60 Hz

Working V oltage: 140 VDC maximum

Current Rating: 100 milliamps

The TTP96K Series was developed with the AES/EBU

digital standard in mind. As a standard the TTP96K utilizes

110 Ohm cabling inside.

Ordering Information

Part Type of No. of

Number Jack Jacks Description

TTP96K3NS TT 96 3.5" High, nor mals strapped

TTP96K WIRED AUDIO SERIES

TT96K3NS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

169

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TTP96K WIRED AUDIO SERIES (continued)

TTP96K WIRED AUDIO SERIES

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

170

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MTPH/TTPH HARNESS AUDIO SERIES

FEATURES AND BENEFITS

• Units feature either 48 MT style jacks or 96 TT style jacks on

the front panels, to a 4 foot harness, out to a backpanel with

PPT’s

• All versions utilize AES/EBU wiring for complete digital compati-

bility

• Attractive, corrosion resistant nickel-plated, steel frame jacks

• Gold-plated switching contacts reduce contact resistance,

improve reliability

• Rugged, attractive black epoxy-finished steel frame chassis

• Extra wide designation strips for easy channel identification

SPECIFICATIONS

MATERIALS

JACKS

Frame: Nickel-plated steel

Bushing: Nickel-plated brass

Tip, Ring and Shunt Springs: Nickel silver with

welded contacts

Assembly Screws: Zinc-plated steel

Welded Contacts: Gold alloy

PANEL

Front Channel: Black anodized aluminum

Frame: C.R.S. black epoxy painted

Designation Strips: Black polycarbonate 94V-0

Designation Strip Covers: Clear polycarbonate

Jack Inserts: Ther moplastic polyester

MECHANICAL

Life: 30,000 cycles

Insertion Force: 7 lbs. maximum

Withdrawal Force: 1 lb. minimum

Environmental: O°C to +50°C

ELECTRICAL

Contact Resistance: 30 milliohms maximum initial

Insulation Resistance: 10,000 megohms maximum

Dielectric Withstanding Voltage: 500 VAC at 60 Hz

Working V oltage: 140 VDC maximum

Current Rating: 100 milliamps

The MTPH and TTPH Harness Series utilize

standard front panel assemblies, a 4 foot cable

harness, and our standard back panel assemblies.

Available in a wide variety of configurations, all

are terminated to our PPT’s on the back panel.

Primarily used where the back panels must either

be mounted into a rack, or brought back to the

front for easier access. Custom cable lengths can

also be supplied. Contact the factor y for details.

MTPH/TTPH HARNESS AUDIO SERIES

MTPH48K3NO

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

171

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MTPH/TTPH HARNESS AUDIO SERIES (continued)

MTPH/TTPH HARNESS AUDIO SERIES

Ordering Information

Pa r t Nu mber Type of Jack No. of Jacks Description

MTPH48K1NS MT 48 1.75" High front panel, 4' Har ness,

3.5" High back panel, normals strapped

MTPH48K1NO MT 48 1.75" High front panel, 4' Har ness,

3.5" High back panel, normals brought out

MTPH48K3NS MT 48 3.5" High front panel, 4' Har ness,

3.5" High back panel, normals strapped

MTPH48K3NO MT 48 3.5" High front panel, 4' Har ness,

3.5" High back panel, normals brought out

MTPH48K3SNO MT 48 3.5" High front panel, 4' Har ness,

3.5" High back panel, sleeve nor mals brought out

TTPH96K1NS TT 96 1.75" High front panel, 4' Har ness,

3.5" High back panel, normals strapped

TTPH96K1NO TT 96 1.75" High front panel, 4' Har ness,

5.25" High back panel, normals brought out

TTPH96K3NS TT 96 3.5" High front panel, 4' Har ness,

3.5" High back panel, normals strapped

TTPH96K3NO TT 96 3.5" High front panel, 4' Har ness,

5.25" High back panel, normals brought out

See Page 172 for Mechanical Drawings

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

172

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MTPH/TTPH HARNESS AUDIO SERIES (continued)

MTPH/TTPH HARNESS AUDIO SERIES

TTPH96K1 SERIES

FRONT VIEW

TTPH96K3 SERIES

FRONT VIEW

MTPH48K1 SERIES

FRONT VIEW

MTPH48K3 SERIES

FRONT VIEW

TOP ROW

BOTTOM ROW

NORMALS AT JACKS NORMALS OUT FULL SLEEVE NORMALS OUT

BOTTOM ROW BOTTOM ROW

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

173

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MTPH/TTPH HARNESS AUDIO SERIES (continued)

MTPH/TTPH HARNESS AUDIO SERIES

MTPH48K1NS & MTPH48K3NS

REAR VIEW

MTPH48K1NO & MTPHK3NO

REAR VIEW

MTPH48K1SNO & MTPH48K3SNO

REAR VIEW

TTPH96K1NS & TTPH96K3NS SERIES

REAR VIEW

TTPH96K1NO & TTPH96K3NO SERIES

REAR VIEW

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

174

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

FEATURES AND BENEFITS

• Allows for custom patchbay configurations

or central patching points

• PPTs have IDCs on both sides for easy

installation

• Rugged, attractive black epoxy-finished

steel chassis

• Cable trays allow for mounting and

securing ter minated cable

SPECIFICATIONS

Panel thickness: .093"

Mounting hole diameter: .187"

Mounting hole spacing (48 IDCs/row):

.340" (Horizontal) x .275" (Ver tical)

Mounting hole spacing (52 IDCs/row):

.320" (Horizontal) x .275" (Ver tical)

Wire size: #22, 24, 26 AWG Stranded

or Solid (IDC termination)

MATERIALS

Housing: Thermoplastic (UL 94V-0)

Contacts: High strength copper alloy

Backpanels: Black Epoxy coated C.R.S.

Cable T ray: Black Epoxy coated C.R.S.

The Backpanel Series offers the end user the flexibility of configuring

their own patchbay, or to use as a central patchpoint location.

The backpanels utilize the PPT punchdown and come with

a rugged cable tray.

Ordering Information

Part Sets of

Number PPT T erminals Height Description

MTP48K3BPNS 48 3.5" T, R, S

MTP48K3PBNO 48 3.5" T, R, S, TN, RN

MTP52K3BPNO 52 3.5" T, R, S, TN, RN

MTP24K7 24 x 2 7.0" +, -, S

TTP96K3BPNS 96 3.5" T, R, S

TTP96K5BPNS 96 x 2 5.25" T, R, S, TN, RN

MTPBP/TTPBP BACKPANEL SERIES

MTPH48K3BPNS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

175

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MTPBP/TTPBP BACKPANEL SERIES

MTPBP/TTPBP BACKPANEL SERIES (continued)

MTPBP/TTPBP BACKPANEL SERIES

FIGURE A

(MTP48K3BPNN SHOWN)

FIGURE B

(TTP96K5BPNO SHOWN)

NOT ALL IDC CONNECTORS SHOWN

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

176

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

EZ NORM PATCHBAY SERIES

The EZ Norm offers a simplified method for setting up and

changing normals to a Bantam/TT patchbay. Simply remove

the middle designation strip, and rotate the center cam, using

a standard screwdriver. An audible”click” can be heard as

you rotate from full normals to no normals to half normals.

An opaque marking strip is included to conceal the normal

position, if needed.

EZ NORM JACK SPECIFICATIONS

MATERIALS:

Housing & Cover: 94V-0 rated ther moplastic

Sleeve Collar: Nickel plated copper alloy

Tip, Ring, Shunt, & Sleeve Springs: Nickel Silver with

welded contacts

Welded Contacts: Gold

Cam Switching Springs: Silver plated copper alloy

Cam Switching Contacts: Silver plated copper alloy

MECHANICAL

Jack Mechanical Life: 30,000 cycles

Cam Contact Mechanical Life: 30,000 cycles

Insertion - Withdrawal Forces: 1 - 4 lbs.

Moisture resistance: MIL-STD 202 Method 106

Thermal shock: MIL-STD 202 Method 107

Salt spray: MIL-STD Method 101 (48 hrs.)

Vibration: MIL-STD 202 Method 213

ELECTRICAL:

Jack Spring Contact Resistance: 30 milliohm Maximum

Cam Switch Contact Resistance: 30 milliohm Maximum

Insulation Resistance: 10,000 Megaohms

Dielectric Withstanding Voltage:

500 VAC (rms) at 60 Hz

Insertion Loss: -0.5dB up to 10 MHz

EZ NORM PATCHBAY OPTIONS

• 1RU can be ter minated to EDAC or Cannon DL,

solder terminals, or wire-wrap terminals

• 1.5RU can be ter minated to EDAC/Cannon DL, solder

terminals, wire-wrap terminals, plus 3 pin connectors,

or our own PPT Professional Punchdown Ter minal

• 2RU Same as above

• All units will be offered with or w/o docking connector

• Unwired units will be offered with either cable tie bar

or cable tray

EZ NORM PATCHBAY SERIES

Center Strip Removes For

Normalling Access

Easily Normal The

Jacks By Rotating To

“Full”, “Non”, Or “Half”

Positions

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

177

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

EZ NORM PATCHBAY SERIES

EZ NORM PATCHBAY SERIES (continued)

TT TT SIZE JACKS

EZN EZ-NORM CAM JACKS

_ REGULAR UNIT

H HARNESS UNIT (UMBILICAL)

10 1 RACK UNIT HEIGHT

15 1.5 RACK UNIT HEIGHT

20 2 RACK UNIT HEIGHT

_ UNWIRED

P PRE WIRED

_ NO DOCKING

D DOCKING CONNECTOR

E90 EDAC/ELCO 90 PIN CONNECTOR

E56 EDAC/ELCO 56 PIN CONNECTOR

E38 EDAC/ELCO 38 PIN CONNECTOR

IDC IDC PPT TERMINALS

3PIN 3 PIN CONNECTORS

WW WIRE WRAP PINS

SL SOLDER LUGS

CDL CANNON DL 96 PIN CONNECT ORS

FA FRONT ACCESS WITH PPT

_ NO REAR SUPPORT

T CABLE TRAY

B CABLE BAR

}

UNWIRED ONLY

Harness Assembly

Front Access

Racks

The EZ Norm comes in 3 different rack heights, 1RU, 1.5RU, and 2 RU.

The Front Access option offers a

slide-out tray, allowing the end

user to re-terminate the patchbay

from the front of the rack.

The EZ Norm is also offered as a

harness assembly, with a standard

harness of 4 ft. Custom lengths are

available, call Switchcraft®for details.

TT EZN _ 10 _ _ E90 IDC SL _

H15P D E56 3PIN CDL T

20 E38 WW FA B

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

178

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TT96 EDAC SERIES

FEATURES AND BENEFITS

• Attractive, corrosion-resistant, nickel-plated jacks

• Steel frame jacks for superior jack life

• Extra wide labeling strips provide maximum space

and two ver tical str ips, one at each side

• Rugged, attractive black anodized

aluminum face will not break

• Two configurations available:

- Normals brought out

- Normalled at jacks

• Gold switching contacts for long-term reliability

• Jacks paired for easy identification of left and

right channels

• Connectorized by EDAC®connectors for ease of

termination by customer

SPECIFICATIONS

MATERIALS

JACKS

Frame: Nickel-plated steel

Bushing: Nickel-plated brass

Tip, Ring and Shunt Springs:

Nickel silver with welded contacts

Assembly Screws: Zinc-plated steel

Welded Contacts: Gold alloy

PANEL

Front Channel: Black anodized aluminum

Frame & Cover: C.R.S. black epoxy painted

Designation Strips: Black

polycarbonate 94V-0

Designation Strip Covers: Clear

polycarbonate

Jack Inserts: Polyester

EDAC CONNECTOR

Housing: Thermoplastic, UL94V-0

Contacts: Gold plated phosphor bronze

MECHANICAL

Life: 30,000 cycles

Insertion Force: 7 lbs. maximum

Withdrawal Force: 1 lb. minimum

Operating: -20°C to +65°C

ELECTRICAL

Contact Resistance: 30 milliohms maximum initial

Insulation Resistance:10,000 megohms

Dielectric Withstanding Voltage: 500VAC at 60 Hz

Working V oltage: 140VDC

Current Rating: 100 milliamps

The TT96EDAC Series offers the convenience of EDAC®connectors on

the back of the panel for easy installation. Available in normals strapped

and normals brought out, both wired to the SAC code of wiring. We also

offer custom wir ing configurations. Contact the factory for details.

EDAC Mating Plugs

Part Number Description

516-090-000-301 90 Pin male w/screw

516-090-000-302 90 Pin male w/nut

516-120-000-101 120 Pin male w/screw

516-120-000-102 120 Pin male w/nut

516-290-500 Ter minal solder-style

516-290-590 Ter minal cr imp-style

Ordering Information

Part Type of No. of

Number Jack Jacks Description

TT96EDACNO TT 96 Nor mals Brought Out (120 pin EDAC)

TT96EDACNS TT 96 Normals Strapped (90 pin EDAC)

TT96EDACNS

TT96 EDAC SERIES

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

179

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TT96 EDAC SERIES (continued)

TT96 EDAC SERIES

Standard Audio Configuration Wiring (S.A.C.)

90 Pin Plug Connector

(Normals at jacks)

Standard Audio Configuration Wiring (S.A.C.)

120 Pin Plug Connector

(Normals brought out)

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

180

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TT96K PATCHKIT SERIES

TTP96K PATCHKIT SERIES

FEATURES AND BENEFITS

• Kit features 96 TT jacks in one rack space

(1.75" high) or two rack spaces (3.5" high)

• Jack blocks can be removed from the front

for easy solder ing

• Dust tray limits dir t, dust and contamination

of jack terminals

• Wire management straps are adjustable and reusable

• Attractive, corrosion resistant nickel-plated jacks

• Steel frame jack for superior jack life

• Extra wide labeling strips provide maximum space

• Rugged, attractive black anodized aluminum

face will not break or r ust

• Three jack configurations available for the exact

switching arrangement you need: full nor mal,

half normal, and non-nor mal (open circuit)

• Fanned solder terminals for easier solder

connections

• Gold switching contacts for long-term reliability

in normal-through connections

SPECIFICATIONS

MATERIALS

JACKS

Frame: Nickel-plated steel

Bushing: Nickel-plated brass

Tip, Ring and Shunt Springs: Nickel silver

with welded contacts

Assembly Screws: Nickel-plated steel

Welded Contacts: Gold alloy

PANEL

Front Channel: Black anodized aluminum

Frame: C.R.S. black epoxy painted

Designation Strips: Black polycarbonate 94V-0

Designation Strip Covers: Clear polycarbonate

Jack Inserts: Ther moplastic polyester

MECHANICAL

Life: 30,000 cycles

Insertion Force: 7 lbs. maximum

Withdrawal Force: 1 lb. minimum

Environmental: 0°C to +50°C

ELECTRICAL

Contact Resistance: 30 milliohms maximum initial

Insulation Resistance: 10,000 megohms maximum

Dielectric Withstanding Voltage: 500VAC at 60 Hz

Working V oltage: 140VDC maximum

Current Rating: 100 milliamps

Ordering Information

Part Type of No. of

Number Jack Jacks Description

TTP96K1FN TT 96 1.75" High, full normals

TTP96K1HN TT 96 1.75" High, half normal

TTP96K1NN TT 96 1.75" High, no normals

TTP96K3FN TT 96 3.5" High, full normals

TTP96K3HN TT 96 3.5" High, half normals

TTP96K3NN TT 96 3.5" High, no normals

The TTP96K Patchkit Series offers the end user a rugged cable tray

to suppor t rear cabling. Heavy duty construction takes weight off the

back of the jacks for increased reliability. Available in 1.75" or 3.5"

height versions.

TTP96K1FN

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

181

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TT96K PATCHKIT SERIES

TTP96K PATCHKIT SERIES (continued)

TTP96K1 SERIES

TTP96K3 SERIES

TOP ROW

BOTTOM ROW

TTP96K1FN

TTP96K3FN TTP96K1HN

TTP96K3HN TTP96K1NN

TTP96K3NN

BOTTOM ROW BOTTOM ROW

TOP R OW TOP R OW

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

182

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MT48K/MT52K PATCHKIT SERIES

FEATURES AND BENEFITS

• Kit features 48 1/4" longframe jacks in one rack

space (1.75" high) or in two rack spaces (3.5" high) or

52 1/4" longframe jacks in one rack space (1.75" high)

• Allows user to add cable and termination panel

• Removable jack panel from the front allows

easy soldering of wire connections

• Jacks have gold switching contacts

• Fanned solder terminals for easier soldering

• Offset ground lugs allow easy bussing of

ground with one wire

• Jacks have a nickel-plated frame and

assembly screws

• Wire management straps are reusable and adjustable

SPECIFICATIONS

MATERIALS

JACKS

Frame: Stamped nickel-plated steel

Bushing: Nickel-plated brass

Tip, Ring and Shunt Springs:

Nickel silver with welded contacts

Assembly Screws: Nickel-plated steel

Welded Contacts: Gold alloy

PANEL

Front Panel: Thermoplastic

Frame: C.R.S. black epoxy paint

Designation Strips: Black

polycarbonate 94V-0

Designation Strip Covers:

Clear polycarbonate

MECHANICAL

Life: 30,000 cycles

Insertion Force: 7 lbs. maximum

Withdrawal Force: 1 lb. minimum

Operating: 0°C to +50°C

ELECTRICAL

Contact Resistance: 30 milliohms maximum initial

Insulation Resistance: 10,000 megohms maximum

Dielectric Withstanding Voltage: 500VAC at 60 Hz

Working V oltage: 140VDC maximum

Current Rating: 100 milliamps

The MT48/52K Patchkit Series offers the end user a rugged

cable tray to support rear cabling. Heavy duty construction

takes weight off the back of the jacks for increased reliability.

Available in 1.75" or 3.5" height versions.

Ordering Information

Part Type of No. of

Number Jack Jacks Height Description

MT48K1NS MT 48 1.75" Normals strapped

MT48K1FN MT 48 1.75" Full normals

MT48K1HN MT 48 1.75" Half nor mals

MT48K1NN MT 48 1.75" No nor mals

MT52K1NS MT 52 1.75" Normals strapped

MT52K1FN MT 52 1.75" Full nor mals

MT52K1HN MT 52 1.75" Half nor mals

MT52K1NN MT 52 1.75" No nor mals

MT48K3FN MT 48 3.5" Full nor mals

MT48K3HN MT 48 3.5" Half nor mals

MT48K3NN MT 48 3.5" No nor mals

MT52K3FN MT 52 3.5" Full nor mals

MT52K3HN MT 52 3.5" Half nor mals

MT52K3NN MT 52 3.5" No nor mals

MT52K1FN

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

183

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MT48K/MT52K PATCHKIT SERIES (continued)

MT48K/MT52K PATCHKIT SERIES

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

184

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MT48/MT52 PATCHBAY SERIES

MT48FN

The MT48/52 Series patchbays offer a rugged cable tie bar

to suppor t rear cabling.Also available is the normals strapped

configuration which has the shunts or normals tied together, top

to bottom jacks.

FEATURES AND BENEFITS

•Units feature either 48 or 52

MT Jax®

•Steel frame jacks for superior jack life

•Attractive, corrosion resistant nickel-plated jacks

•Gold switching contacts for long-term reliability in nor mal-

through connections

•Offset ground ter minal for ease in making common ground

buss connections

•Fanned solder ter minals for

easier solder connections

•Cable tie bar takes the weight

of cables off the jacks

•Four jack configurations

available for the exact switching arrangement: full nor mal,

half normal, non-nor mal, and nor mals strapped

SPECIFICATIONS

MATERIALS

JACKS

Frame: Steel, nickel-plated

Bushing: Brass, nickel-plated

Springs: Nickel silver, solder lugs

Ground T erminal: Nickel silver,

solder lugs

Switching Contacts: Welded, gold alloy

Insulation: Phenolic spacers, rigid PVC tubing through stack

Screws: Steel, nickel-plated

PANEL

Jack Panel:Thermoplastic

Cable Support Bracket: 5/16”

diameter black epoxy painted steel rod

Screws (designation strip): Steel, black zinc-plated

Screws (mounting jack): Steel, nickel plated

Kwik-change® Designation Strip: Extruded aluminum, black

anodized

Marking Strip:

White plastic, matte finish

Marking Strip Cover:

Clear, extruded plastic

MECHANICAL

Life: 30,000 cycles

Insertion Force: 7 lbs. maximum

Withdrawal Force: 1 lb. minimum

Operating: 0˚C to +50˚C

ELECTRICAL

Contact Resistance: 30 milliohms maximum initial

Insulation Resistance: 10,000 megohms maximum

Dielectric Withstanding Voltage: 500VAC at 60 Hz

Working Voltage: 140VDC

maximum

Current Rating: 100 milliamps

Ordering Information

Part Type of No. of

Number Jack Jacks Description

MT48FN MT 48 Full normals

MT48HN MT 48 Half normals

MT48NN MT 48 No normals

MT48NS MT 48 Normals strapped

MT52FN MT 52 Full normals

MT52HN MT 52 Half normals

MT52NN MT 52 No normals

MT52NS MT 52 Normals strapped

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

185

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MT48/MT52 PATCHBAY SERIES (continued)

MT48/MT52 PATCHBAY SERIES

MT52 SERIES

MT48 SERIES

YMT332BN YMT334BN YMT389N

JACK SCHEMATICS

“N” SUFFIX DENOTES WELDED GOLD CONTACTS

AND NICKEL-PLATED FRAME

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

186

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TTP96AS PATCHBAY SERIES

FEATURES AND BENEFITS

• Unit features 96 TT jacks

• Attractive, corrosion resistant nickel-plated jacks

• Steel frame jack for superior jack life

• Extra wide labeling strips provide maximum space

• Rugged cable tie bar takes the weight of

cables off the jacks

• Rugged, attractive black anodized aluminum

face will not break

• Three jack configurations available for the exact

switching arrangement you need: full nor mal,

half normal, and open circuit panel

• Fanned solder terminals for easier solder

connections

• Offset ground terminal for ease in making

common ground buss connections

• Gold switching contacts for long-term reliability

in normal-through connections

SPECIFICATIONS

MATERIALS

JACKS

Frame: Steel, nickel-plated

Bushing: Nickel-plated copper alloy

Springs: Copper alloy solder lugs

Ground T erminal: Steel, tin electrodeposited

Switching Contacts: Welded, gold alloy inlay

over palladium base

Insulation: Rigid plastic spacers, rigid PVC

tubing through stack

Screws: Steel, plated

PANEL

Frame: Black anodized aluminum

Inserts: Polyester, glass filled, 94V-0

Cable Support Bar: Cold rolled steel, nickel-plated

Designation Strips: Ther moplastic, 94V-0

Designation Strip Covers:

Clear thermoplastic, SE-1

Marking Strip: Rigid vinylite

Jack Mounting Screws: Steel, plated

Screws: Steel, black plated

MECHANICAL

Life: 30,000 cycles

Insertion Force: 7 lbs. maximum

Withdrawal Force: 1 lbs. minimum

Environmental: 0°C to +50°C

ELECTRICAL

Contact Resistance: 30 milliohms maximum initial

Insulation Resistance: 10,000 megohms maximum

Dielectric Withstanding Voltage: 500VAC at 60 Hz

Working V oltage: 140VDC maximum

Current Rating: 100 milliamps

The TTP96AS Series of patchbays offer a rugged

cable tie bar to support rear cabling.

Ordering Information

Part Type of No. of

Number Jack Jacks Description

TTP96ASFN TT 96 Full normals

TTP96ASHN TT 96 Half normals

TTP96ASNN TT 96 No normals

TTP96AS PATCHBAY SERIES

TTP96AS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

187

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TTP96AS PATCHBAY SERIES

TTP96AS PATCHBAY SERIES (continued)

TOP ROW

BOTTOM

ROW BOTTOM

ROW

TTP96ASFN TTP96ASHN TTP96ASNN

TOP ROW TOP R OW

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

188

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

Q-G®PATCHBAY SERIES

FEATURES AND BENEFITS

• Available in 1RU or 2RU versions

• Available with or without the connectors

• E Series connectors are silver-plated,

3 pins/contacts with black finish

• Cable tie bar takes the weight of the cables off

the solder terminations

• Rugged aluminum channel

increases durability

• Silk-screen designation area makes

it easy to re-label channels

SPECIFICATIONS

MATERIALS

CONNECTORS

Housing: Die-cast, black velvet finish

Inserts: Glass-filled ther moplastic

Pin/Contacts: Copper alloy, silver-plated

Latch Release: Steel, nickel-plated

Insert Locking Cam: Die-cast zinc

FRAME

Aluminum, black anodized

CABLE TIE BAR

Steel, black epoxy

The QG Patchbay features a 19" rack unit loaded with E Series QG

connectors.These XLR’s have the same panel cut-out, male or female,

silver-plated pins or contacts, and a black finish. All connectors have

solder cup terminals for easy soldering and the inserts are removable

from the back, allowing for easy changes. The one rack unit height

version comes with 16 male, or 16 female, or 8 male and 8 female

connectors. The two rack unit version comes with 16 male and

16 f emale connectors.We also off er the unit without connectors , but with

the panel cut-outs already punched out. All versions have

a rugged cable tie bar, which takes the weight of the cabling away

from the solder connections.

Ordering Information

Part Number Height Description

QGPK116FB 1.75" 16 female

QGPK116MB 1.75" 16 male

QGPK18M8FB 1.75" 8 male, 8 female

QGPK332MFB 3.5" 16 female( top), 16 male (bottom)

QGPK1B 1.75" Blank panel

QGPK3B 3.5" Blank panel

QGPK332MFB

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

189

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

Q-G®PATCHBAY SERIES

Q-G®PATCHBAY SERIES (continued)

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

190

www.switchcraft.com ® Registered trademark of Neutrik

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

HPC PATCHBAY SERIES

The HPC Patchbay features a 19” rack unit loaded with HPC

Series connectors. Available with either 0.250” Faston terminals

or 0.187” F aston terminals.One rack unit height versions come

with 12 HPC connectors, two rack unit height versions come

with 24 HPC connectors. All versions have a rugged cable

tie bar, which takes the weight of the cabling away from the

connections.

FEATURES AND BENEFITS

• Available in 1RU or 2RU versions

• Available with or without connectors

• HPC Series connectors are compatible with Neutrik

Speakon®connectors

• Cable tie bar takes weight of the cables off the terminations

• Rugged aluminum channel

• Silk-screen designation area makes it easy to re-label chan-

nels

HP CONNECTOR SPECIFICATIONS

See page 38 for details

MATERIALS

Housing:Ther moplastic UL 94V-O rated

Contacts: Silver-plated over copper alloy

FRAME

Aluminum, black anodized

CABLE TIE BAR

Steel, black epoxy

Part

Number Height Description

HPCPK112F 1.75" 12 connectors, 0.250" Fastons

HPCPK112F1 1.75" 12 connectors, 0.187" Fastons

HPCPK1B 1.75" Blank panel

HPCPK324F 3.50" 24 connectors, 0.250" Fastons

HPCPK324F1 3.50" 24 connectors, 0.187" Fastons

HPCPK3B 3.50" Blank panel

HPC PATCHBAY SERIES

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

191

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

DATA PATCHBAY SERIES

FEATURES AND BENEFITS

• Unit Features either 8,16, 24, or 32 TT style

jacks on the front Panels, to a 9 pin D-Sub

or PPT back Plane.

• All version utilize low capacitance internal wir ing

for maximum performance of transferring data

• All standard units are available 1 or 2 rack

units high (1.5 RU available by request)

• Rugged, attractive black epoxyfinished steel

frame chassis

Our standard RS data jackfield series offer a

multiple combination of por ts, rack heights, and

back panel terminations which will easily fit into

any television broadcast or video production

where custom data patching is required. Custom

por ts and rack height combinations can be

supplied. Contact the factor y for details.

SPECIFICATIONS

ELECTRICAL

Internal Wiring:

24 AWG Solid TC, foils shield

Nom Capacitance: 11.5 pF/ft between conductors

21.3 pF/ft between one conductor and conductor

connected to the shield

Nom.Impedance: 110 Ohms

RS422 Ordering Information

Part No. of Front Panel Back Rack

Number* Jacks Layout Plane Height

RS422H48N081 2 x 8 Horizontal 9 Pin D-Sub 1

RS422V4N081 2 x 8 Ver tical 9 Pin D-Sub 1

RS422H4N161 2 x 16 Hor izontal 9 Pin D-Sub 1

RS422H4N162 2 x 16 Hor izontal 9 Pin D-Sub 2

RS422V4N161 2 x 16 Vertical 9 Pin D-Sub 1

RS422V4N162 2 x 16 Vertical 9 Pin D-Sub 2

RS422H4N242 2 x 24 Hor izontal 9 Pin D-Sub 2

RS422V4N242 2 x 24 Vertical 9 Pin D-Sub 2

RS422V4N322 2 x 32 Vertical 9 Pin D-Sub 2

RS422PH4N081 2 x 8 Horizontal PPT Punchdown 1

RS422PV4N081 2 x 8 Ver tical PPT Punchdown 1

RS422PH4N161 2 x 16 Hor izontal PPT Punchdown 1

RS422PH4N162 2 x 16 Hor izontal PPT Punchdown 2

RS422PV4N161 2 x 16 Vertical PPT Punchdown 1

RS422PV4N162 2 x 16 Vertical PPT Punchdown 2

RS422PH4N242 2 x 24 Hor izontal PPT Punchdown 2

RS422PV4N242 2 x 24 Vertical PPT Punchdown 2

RS422PV4N322 2 x 32 Vertical PPT Punchdown 2

RS 422 DATA PATCHBAY SERIES

*Add "N" for non-nor malled version

See Page 267 for Patchcord Information

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

192

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

DATA PATCHBAY SERIES

RS 422 DATA PATCHBAY SERIES

Ordering Information

Part No. of Front Panel Back Rack

Number Jacks Layout Plane Height

RS422H4N081 2 x 8 Horizontal 9 Pin D-Sub 1

RS422V4N081 2 x 8 Vertical 9 Pin D-Sub 1

RS422H4N162 2 x 16 Horizontal 9 Pin D-Sub 1, 2

RS422V4N162 2 x 16 Vertical 9 Pin D-Sub 1, 2

RS422H4N242 2 x 24 Horizontal 9 Pin D-Sub 2

RS422V4N242 2 x 24 Vertical 9 Pin D-Sub 2

RS422V4N322 2 x 32 Vertical 9 Pin D-Sub 2

RS422PH4N081 2 x 8 Horizontal PPT Punchdown 1

RS422PV4N081 2 x 8 Vertical PPT Punchdown 1

RS422PH4N162 2 x 16 Horizontal PPT Punchdown 1, 2

RS422PV4N162 2 x 16 Vertical PPT Punchdown 1, 2

RS422PH4N242 2 x 24 Horizontal PPT Punchdown 2

RS422PV4N242 2 x 24 Vertical PPT Punchdown 2

RS422PV4N322 2 x 32 Vertical PPT Punchdown 2

RS422V4N322

32 Vertical Paired Jacks

Front and Back Views

RS422H4N242

24 Horizontal Paired Jacks

Front and Back Views

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

193

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

VPP VIDEO PATCHBAY SERIES

FEATURES AND BENEFITS

• HD Series meets SMPTE 292M Specifications

• SD Series has a bandwidth from DC to 1.75GHz

• Black thermoplastic modules insulate

jacks from chassis

• Jacks feature rugged heavy duty housings

VIDEO JACK SPECIFICATIONS

ELECTRICAL

Rated Bandwidth: 2.4 GHz (HD), 1.75 GHz (SD)

Characteristic Impedance: 75 ohms

Return Loss: Better than –15 dB

Insertion Loss: Better than –.5 dB

Contact Resistance: Less than 20 milliohms

Termination Resistance: 75 W, ±1%

Center Conductor: Accepts .090 pin diameter

MECHANICAL

Mechanical Shock: Per MIL-STD-202, Method 213,

Test condition I

Vibration: Per MIL-STD-202, Method 201

Insertion Force: 12 lbs. maximum

Withdrawal Force: 3 lbs. minimum

Life Cycle: 30,000

MATERIAL

Housing: Zinc alloy, nickel plated

Center Contacts: Copper alloy, gold plated

Switching Springs: Copper alloy, gold plated

Grounding Contacts:

HD Series - Copper alloy, gold plated

SD Series - Copper alloy, nickel plated

Insulators: Thermoplastic, UL 94V-0 rated

ENVIRONMENTAL

Operating T emperature: – 40ºC to 65ºC

Storage T emperature: – 55ºC to 85ºC

Thermal Shock: Per MIL-STD-202, Method 107

Moisture and Humidity:

Per MIL-STD-202, Method 106

The VPP Series video patchbays offer a wide variety of options for video patching.

The HD Series meets SMPTE 292M specifications for high definition video signaling,

covering a bandwidth range from DC to 2.4GHz.The SD Series is perfect for serial

digital, with a bandwidth from DC to 1.75GHZ. Both come in either terminated or

non-terminated, 24 or 26 jacks, 1.75" or 3.5" heights.

Ordering Information

Part Type of No. of

Number Jack Jacks Height Description

VPP24K1HD*75T HD 24 1.75" Terminated

VPP24K1HD*NT HD 24 1.75" Non-term

VPP24K1SD*75T SD 24 1.75" Terminated

VPP24K1SD*NT SD 24 1.75" Non-term

VPP26K1HD*75T HD 26 1.75" Terminated

VPP26K1HD*NT HD 26 1.75" Non-term

VPP26K1SD*75T SD 26 1.75" Terminated

VPP26K1SD*NT SD 26 1.75" Non-term

VPP24K3HD*75T HD 24 3.5" Terminated

VPP24K3HD*NT HD 24 3.5" Non-term

VPP24K3SD*75T SD 24 3.5" Terminated

VPP24K3SD*NT SD 24 3.5" Non-term

VPP26K3HD*75T HD 26 3.5" Terminated

VPP26K3HD*NT HD 26 3.5" Non-term

VPP26K3SD*75T SD 26 3.5" Terminated

VPP26K3SD*NT SD 26 3.5" Non-term

*Add “N” for non-normalled version

VPP VIDEO PATCHBAY SERIES

VPP24K3HD75T

VJHD*75TX

VPP VIDEO PATCHBAY SERIES

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

194

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

VPP VIDEO PATCHBAY SERIES (continued)

VPP VIDEO PATCHBAY SERIES

NON-NORMALLED NORMALLED NORMALLED NON-NORMALLED

TERMINATED TERMINATED NON-TERMINATED NON-TERMINATED

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

195

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

VPP VIDEO PATCHBAY SERIES

FREQUENCY (MHz) FREQUENCY (MHz)

SMITH CHART

(TYPICAL)

Ordering–Individual Jacks

Part Number Type Description

VJHD*75TX HD Terminated

VJHD*NTX HD Non-terminated

VJSD*75TX SD Terminated

VJSD*NTX SD Non-terminated

*Add “N” for non-normalled version

VPP VIDEO PATCHBAY SERIES (continued)

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

196

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MVP MIDSIZE VIDEO PATCHBAY SERIES

The MVP Series video patchbays offer outstanding

performance and high density. Patchbays consist of

32 jacks in either 1RU or 2RU heights, jacks come either

terminated or non-terminated. These jacks are rated

from DC to 3 GHz, and are rated at 30,000 lifecycles.

MVP32K3*75T

MVJ*75T

FEATURES AND BENEFITS

• Midsize video jacks rated from DC to 3 GHz

• 32 midsize jacks mounted either 1RU, 1.5RU or 2RU panel

• Available in ter minated or non-terminated configurations

SPECIFICATIONS

MATERIAL

Frame: Aluminum, black anodized

Designation Strips: Vinylite, white

Designation Strip Covers: Lexan, transparent

Jack Inserts: Ther moplastic, UL 94V-0 rated

MIDSIZE VIDEO JACK SPECIFICATIONS

ELECTRICAL

Rated Bandwidth: 3.0 GHz

Characteristic Impedance: 75 ohms

Return Loss: See Typical Retur n Loss Char t

Insertion Loss: See Typical Insertion Loss Chart

Contact Resistance: Less than 20 milliohms

Termination Resistance: 75 W, ±1%

Center Conductor: Accepts .048 pin diameter

MECHANICAL

Mechanical Shock: Per MIL-STD-202,

Method 213, Test condition I

Vibration: Per MIL-STD-202, Method 201

Insertion Force: 12 lbs. maximum

Withdrawal Force: 3 lbs. minimum

Life Cycle: 30,000

MATERIAL

Housing: Zinc alloy, nickel plated

Center Contacts: Copper alloy, gold plated

Switching Springs: Copper alloy, gold plated

Grounding Contacts: Copper alloy, gold plated

BNC Insulators: Teflon

Actuators: Thermoplastic, UL94V-0 rated

ENVIRONMENTAL

Operating T emperature: – 40ºC to 65ºC

Storage T emperature: – 55ºC to 85ºC

Thermal Shock: Per MIL-STD-202, Method 107

Moisture and Humidity: Per MIL-STD-202, Method 106

MVP MIDSIZE VIDEO PATCHBAY SERIES

Ordering Information

Part Type

Number of Jack Height Description

MVP32K1*75T Midsize 1.75" Terminated

MVP32K1*NT Midsize 1.75" Non-terminated

MVP32K3*75T Midsize 3.5" Terminated

MVP32K3*NT Midsize 3.5" Non-terminated

* Add “N” for non-nor malled version

Note: For 1.5RU (2.62" height), use K2

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

197

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MVP MIDSIZE VIDEO PATCHBAY SERIES (continued)

MVP MIDSIZE VIDEO PATCHBAY SERIES

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

198

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MVP MIDSIZE VIDEO PATCHBAY SERIES

SMITH CHART (TYPICAL)

RETURN LOSS (TYPICAL) RETURN LOSS (TYPICAL)

MVP MIDSIZE VIDEO PATCHBAY SERIES (continued)

(dB)

-5

-10

-15

-20

-25

-30

-35

-1

-2

-3

-4

-5

(dB)

0600 1200 1800 2400 3000 0 600 1200 1800 2400 3000

Ordering Information

Part

Number Description

MVJ*75TX Terminated

MVJ*NTX Non-terminated

*Add “N” for non-normalled version

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

199

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

VAP VIDEO/AUDIO PATCHBAY SERIES

VAP VIDEO/A UDIO PATCHBAY SERIES

FEATURES AND BENEFITS

• Combines 13 video jacks and 26 long-frame

audio jacks into one patchbay

• Available with either HD Series or SD Ser ies

video jacks

• All audio jacks are nickel-plated with steel frames

and gold-plated switching contacts

• Audio modules consist of 4 YMT334BN jacks,

video modules consist of 2 dual video jacks

VIDEO JACK SPECIFICATIONS

ELECTRICAL

Rated Bandwidth: 2.4 GHz (HD), 1.75 GHz (SD)

Characteristic Impedance: 75 ohms

Return Loss: Better than –15 dB

Insertion Loss: Better than –.5 dB

Contact Resistance: Less than 20 milliohms

Termination Resistance: 75 W, ±1%

Center Conductor: Accepts .090 pin diameter

MECHANICAL

Mechanical Shock: Per MIL-STD-202,

Method 213, Test condition I

Vibration: Per MIL-STD-202, Method 201

Insertion Force: 12 lbs. maximum

Withdrawal Force: 3 lbs. minimum

Life Cycle: 30,000

MATERIAL

Housing: Zinc alloy, nickel plated

Center Contacts: Copper alloy, gold plated

Switching Springs: Copper alloy, gold plated

Grounding Contacts:

HD Series - Copper alloy, gold plated

SD Series - Copper alloy, nickel plated

Insulators: Thermoplastic, UL 94V-0 rated

ENVIRONMENTAL

Operating T emperature: – 40ºC to 65ºC

Storage T emperature: – 55ºC to 85ºC

Thermal Shock: Per MIL-STD-202, Method 107

Moisture and Humidity: Per MIL-STD-202, Method 106

The VAP Series combines audio and video in one convenient

patchbay. Standard versions consist of 13 video jacks and 26

long-frame audio jacks into one unit. Options include HD Ser ies

video jacks which are rated from DC to 2.4GHz or SD Series

rated from DC to 1.5GHz. Both come in either terminated or

non-terminated jacks. The MT Style audio jacks all have

nickel-plated steel frames and gold-plated switching contacts.

Flared terminals make soldering easier. All audio jacks are

T,R,S, TN, and RN. Individual modules are useful for custom

configurations.

Ordering Information

Part Type of

Number Jack Height Description

VAPK1HD*75T HD 1.75" Terminated

VAPK1HD*NT HD 1.75" Non-terminated

VAPK1SD*75T SD 1.75" Terminated

VAPK1SD*NT SD 1.75" Non-terminated

VAPK3HD*75T HD 3.5" Terminated

VAPK3HD*NT HD 3.5" Non-terminated

VAPK3SD*75T SD 3.5" Terminated

VAPK3SD*NT SD 3.5” Non-terminated

Modules

VMAFN MT 4- YMT334BN jacks

VMVHD*75T HD 2- HD ter minated jacks

VMVHD*NT HD 2- HD non-ter minated jacks

VMVSD*75T SD 2- SD terminated jacks

VMVSD*NT SD 2-SD non-terminated jacks

*Add “N” for non-normalled version

VJHD*75TX

VAPK3HD*75T

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

200

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

VAP VIDEO/AUDIO PATCHBAY SERIES (continued)

VAP VIDEO/AUDIO PATCHBAY SERIES

VAPK3HD*75T

VAPK1HD*75T

VJ SERIES MT SERIES

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

201

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

The MBPK Series combines audio and video in one

convenient patchbay. The patchbay consists of 16 midsize

video jacks and 48 TT bantam jacks.Options include 75 Ohm

terminated or non-terminated video jacks. All TT bantam j a ck s

have T, R, S, TN and RN solder ter minals. Audio jacks have

nickel-plated steel frames, gold-plated crossbar switching

contacts and flared terminals for easier soldering.

FEATURES AND BENEFITS

Combines 16 midsize video jacks and

48 TT bantam audio jacks

Video jacks are rated from DC to 3.0 GHZ

All audio jacks are nickel-plated with steel frames and gold-

plated crossbar switching contacts

For non-ter minated version, use part no. MBPK1NT

VIDEO JACK SPECIFICATIONS

See page 196 for details

AUDIO JACK SPECIFICATIONS

See page 164 for details

MATERIALS

FRAME

Aluminum, black anodized

MBPK VIDEO/AUDIO PATCHBAY SERIES

MBPK175T

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

202

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

SERIES 1200

Panels accomodate 24 T-Jax®jacks in standard 1.75 inch x

19 inch racks. Jack openings are on alternate .625 inch and

.750 inch spacing; twin plugs cannot be cross-connected

between adjacent jack pairs. Includes designation strips

(marking str ips and transparent plastic covers).

SERIES 1300

Same as Series 1200, except MT-Jax®are used in panel

assemblies.

SERIES 1400

Mounts 26 T-Jax®.Openings are on continuous .625 inch

centers. Twin plug can be used on any two adjacent jacks.

Single designation strip (marking strip, and plastic cover).

WEco equivalent is 230B.

SERIES 1400300

Same as Series 1400, except designation strip is

Kwik-Change®type which is easier to install and remove and

provides larger ver tical designation marking area. Strip holder

is recessed into top of panel for additional panel strength.

1400301 has single height Kwik-Change®designation strip.

1400315 has a single height Kwik- Change®designation strip

along bottom of panel and double height strips above jacks.

Top designation strip has .188 inch overhang abo ve 1.75 inch

panel height, to help seal small opening between adjacent

panels. CAUTION: Because of this overhang, 1400315

cannot be mounted one above another in a rack.

SERIES 1500

Same as Series 1400 except MT-Jax®are used in panel

assemblies.

SPECIFICATIONS

Jack Panel: General pur pose black phenolic resin

Frame (except 1400300): Plated, steel

End Bracket and Side Strip (1400300 only): Cold rolled

plated steel

Designation Strip (except 1400300): Clear plastic.

"Kwik-Change" Designation Strip (1400300): Extruded

aluminum, black anodized and black thermoplastic

UL 94V-0.

Marking Strip: White plastic, matte finish.

Marking Strip Cover: Clear extruded plastic.

Screws: #6-32 x .25 inch phillips RHMS (for mounting jacks).

ORDERING

Part number table lists blank panels and popular jack panel

assemblies. If you wish to mount components on basic panels,

order jacks, lamp jacks, and switches separately. (See

appropriate section in this catalog.) For other panel assemb lies ,

provide complete details with y our inquiry or order .Switchcraft

can build special assemblies to your requirements in small

or large quantities. See wire wrapping data. Series 1200

and 1400 are available with holes pre-drilled for vertical

designation strips (Series DS320). Add prefix "D" to part

numbers for pre-drilled panels: D1200, D1400301, etc.

STANDARD SINGLE ROW JACK PANELS

SERIES 1200 AND 1400

LONG FRAME (1/4") TELEPHONE JACK PANELS

Series 1200

*Shown with optional

jacks.See next page for

specific par t numbers.

Series 1400

*Shown with optional

jacks.See next page for

specific par t numbers.

1400301

*Shown with optional

jacks.See next page for

specific par t numbers.

1400315

*Shown with optional

jacks.See next page for

specific par t numbers.

LONG FRAME 1/4"TELEPHONE JACK PANELS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

203

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LONG FRAME (1/4") TELEPHONE JACK PANELS (continued)

Part Numbers

Assembly with Jacks

With Solder Lugs Assembly with Jacks

With Wire-Wrapping

Terminals

Part Numbers

Number

of Jacks Type of

Jacks Installed

Description

Panel Only

1200

1400

1400301

◊1400315

Offset

◊X1332A

◊X1332B

◊X1334B

X1532A

◊X1532B301

◊X1534B

◊X1542B315

◊W1332A

◊W1334B

◊W1532A301

◊W1532B301

◊W1534B

◊W1534B301

None

24 MT332A , XMT332A or WMT332A MT-Jax ®

24 MT332B or XMT332B MT-Jax®

24 MT334B,XMT334B or WMT334B MT-Jax®

None

26 MT332A or XMT332A MT-Jax®

26 MT332A or WMT332A MT-Jax®

26 MT332B MT-Jax®

26 MT332B, XMT332B or WMT332B MT-Jax®

26 MT334B, XMT334B or WMT334B MT-Jax®

26 WMT334B MT-Jax®

26 XMT342B MT-Jax®

Straight

1332A

◊1332B

◊1334B

1532A

◊1532A301

◊1532B

◊1532B301

◊1534B

◊Special order only; contact factory for price and delivery.

1. Prefix “X” denotes offset lugs for buss wiring. Jack Mounting Screws: #6-32, P10725, can be ordered separately.

Contact Switchcraft.

Legend Cards (Ser ies 1200, 1300) - A1029

Legend Windows (Ser ies 1200, 1300) - A1030

Series 1200

Series 1400

Series 1400-301

Series 1400-315

LONG FRAME 1/4"TELEPHONE JACK PANELS

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

204

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LONG FRAME 1/4"TWIN ROW JACK PANELS

STANDARD TWIN ROW JACK PANELS

SERIES 2400, 2600, 2600300, 2700300 – PHENOLIC

Twin row jack panels offer greater jack density - up to 52 jacks

per panel. All panels fit standard 19" wide racks. Blank panels

or standard assemblies can be ordered from Switchcraft.

Series 2600 panels are direct equivalent to WEco #230A.

SERIES 2400

Twin row panel accommodates 48 T-Jax®.Openings are on

alternate .625" and .75" centers. Panel is 2.125" high and fits

standard 19" racks. Twin plug cannot be cross-connected

between jacks in adjacent quads, but may be connected either

horizontally or vertically in the same quad. Single designation

strip.

SERIES 2500

Same as Series 2400 except MT-Jax®are used.

SERIES 2600

Twin row panel accommodates 52 T-Jax®in standard 1.75" x

19" racks. Jack openings are on continuous centers.Twin plug

can be connected to any two adjacent jacks, either horizontally

or vertically.Two designation strips.WEco equivalent is #230A.

SERIES 2600300

Same as Series 2600, except designation strips are

Kwik-Change®type, providing larger ver tical marking area. Top

strip holder is recessed into top of panel to provide additional

strength. 2600301 has single height designation strips (one

above and below each row of jacks).

2600310

Has a double height strip above top row and a steel reinforcing

strip below bottom row. Top strip has .188" overhang above

1.75" panel height, helping seal the small opening between

adjacent panels. Note: overhang prevents mounting panel one

above another in a rack.

SERIES 2700

Same as Series 2600 except MT-Jax®are used in panel

assemblies.The ser ies is available with cable tie bar.

ORDERING

1. Order basic panels and popular assemblies by part number

from table.

2. For special panels provide complete details with your inquiry

or order.

3. Series 2600 is available with hole pre-drilled for vertical

designation strips, Series DS320. Add prefix “D” to part

number (D2600301, etc.).

4. Jack Mounting Screws: #6-32, P10725, can be ordered

separately. Contact Switchcraft.

LONG FRAME (1/4") TWIN ROW JACK PANELS

Series 2400

*Shown with optional jacks,

See next page for specific

par t numbers.

Series 2600

*Shown with optional jacks,

See next page for specific

par t numbers.

Series 2600301

*Shown with optional jacks,

See next page for specific

par t numbers.

LONG FRAME 1/4"TWIN ROW JACK PANELS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

205

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LONG FRAME 1/4"TWIN ROW JACK PANELS – PART NUMBERS

LONG FRAME (1/4") TWIN ROW JACK PANELS (continued)

Part Numbers

Assembly with Jacks Having

Solder Lugs Assembly with Jacks

Having Wire-

Wrapping T erminals Number

of Jacks Type of Jack Installed

Part Numbers Description

Panel Only

2400

2600

2600301

2600310

Offset1

◊X2432A

◊X2432B

◊X2434B

◊X2532A

◊X2532B

X2534B

◊X2732A

◊X2732A301

◊X2732B

◊X2732B301

◊X2734B

◊X2734B301

◊X2832A

◊X2932A

◊W2532A

◊W2533B

◊W2732A301

◊W2732B

◊W2732B301

◊W2734B301

◊W2789

None

48 T332A

48 T332B

48 T334B or XMT334B T-Jax®

48 MT332A, XMT332A or WMT332A MT-Jax ®

48 MT332B or XMT332B MT-Jax®

48 MT333 MT-Jax®

48 MT333B or WMT333B MT-Jax®

48 MT334B or XMT334B MT-Jax®

48 MT342B MT-Jax®

48 MT344B, MT-Jax®

24 MT388, Twin MT-Jax®

24 MT389 Twin MT-Jax®

None

None (WEco equivalent #230A)

None

52 MT332A or XMT332A MT-Jax®

52 MT332A, XMT332A or WMT332A MT-Jax®

52 MT332B, XMT332B or WMT332B MT-Jax®

52 MT333B, MT-Jax®

52 MT334B or XMT334B MT-Jax®

52 MT334B, XMT334B or WMT334B MT-Jax®

26 MT389 or WMT389 Twin MT-Jax®

48 XT332A

48 XMT332A

Straight

◊2432A

◊2432B

◊2434B

◊2532A

◊2532B

◊2533

◊2533B

◊2534B

◊2542B

◊2544B

◊2588

◊2589

◊2732A

◊2732A301

◊2732B

◊2732B301

◊2733B

◊2734B

◊2734B301

◊2789

1. Prefix “X” denotes offset lugs for buss wiring.

◊Special order only; contact factory for price and delivery.

Series 2400 and 2500

Series 2600 and 2700

Series 2600300 and 2700301

Series 2600310 and 2700310

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

206

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LONG FRAME 1/4"MODULAR TWIN ROW JACK PANELS

SERIES JP052000

Same as JP012000, except designed for flush mounting or standoff

mounting.Switchcraft Brack et Kit K107;Contact Switchcraft.

SERIES JP062000

Same as JP052000, except 23" wide (includes 14 inserts

which accommodate 56 MT-Jax®).

SERIES JP072000

Same as JP012000, except mounts 52 MT-Jax®and includes

13 black module inser ts. Modular equivalent of WEco #230A.

SERIES JP082000

Same as JP072000, except 23" wide (includes 16 inser ts which

accommodate 64 MT-Jax®).Modular equivalent to WEco #231A.

SERIES JP092000

Same as JP072000, except with 5.375" extension brackets

which permit access to rear of jacks from front of panel.

Brackets are supplied mounted to panel.

SERIES JP102000

Same as JP092000, except 23" wide (includes 16 inser ts

which accommodate 64 MT-Jax®).

SERIES JP112000

Same as JP072000, except designed for flush mounting or standoff

mounting. Switchcraft Bracket Kit K107;Contact Switchcraft.

SERIES JP122000

Same as JP112000, except 23" wide (includes 16 inserts

which accommodate 64 MT-Jax®).

SPECIFICATIONS

Panel and Integral Designation Mounting Strips:

Aluminum alloy, extruded. Black anodized per MIL-A-8625

Module Insert: Molded plastic, matte finish. Black standard;

white, red, green, blue or yellow available on special order

Marking Strip: White matte finish plastic

Designation Strip Cover: Extruded clear plastic

Screws: #6-32 x 5/15", PHMS, for jack mounting;

#4-40 x 1/2" phillips PHMS, for module inser t mounting

Brackets: 5.375", aluminum alloy black anodized finish

(JP032000, JP042000, JP092000, JP102000)

Screws, Mounting Bracket: #6-32, self-tapping supplied.

LONG FRAME 1/4"MODULAR TWIN ROW JACK PANELS

LONG FRAME (1/4") MODULAR TWIN ROW JACK PANELS

SERIES JP122S34B

*Shown with optional jacks, See next page

for specific part numbers.

SERIES JP072S32A

*Shown with optional jacks, See next

page for specific part numbers.

SERIES JP032S32B

*Shown with optional jacks, See next page

for specific part numbers.

SERIES JP012000 THROUGH JP122000

Series JP®Modular Jack Panels feature a modular pac kaging

concept. Jacks are mounted on inserts then complete

modular insert assemblies are mounted to the panel from the

rear. Mounting and wiring are quick and easy. Individual jacks

or complete inserts can be removed from the panel with

minimum disturbance to wiring and adjacent jacks. JP panels

offer three mounting styles (standard rack mount, flush

mount, and extension mount), staggered or continuous-center

panel openings, two panel lengths (19" and 23"), WEco

equivalents, Kwik-Change®designation strips, precision

manufactured modular parts, rugged black anodized

aluminum frames and quick and easy module or jack

removal/installation.

Each module inser t has four holes which mount four MT-Jax®

or two Twin-Jax®.Each modular jack panel is supplied with

two Kwik-Change®designation strips. Mounting strips are

integral with panel, and marking strips and clear covers snap

into place quickly and easily.

SERIES JP012000

Standard 1.75" x 19" size for console, rack or control panel

mounting. Mounts 48 MT-Jax®.Openings are on alternate

.625" and .75" centers in each row. A twin plug fits jacks

horizontally or vertically in the same quad, but cross-connecting

between quads is not possible. Includes 12 black module

inserts, insert mounting screws and two Kwik-Change®

designation strips.

SERIES JP022000

Same as JP012000, except 23" wide (includes 14 inserts

which accommodate 56 MT-Jax®).

SERIES JP032000

Same as JP012000, except with 5.375" extension brackets

which permit access to rear of jacks from front of panel.

Brackets are supplied mounted to panel.

SERIES JP042000

Same as JP032000, except 23" wide (includes 14 inserts

which accommodate 56 MT-Jax®).

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

207

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LONG FRAME 1/4"MODULAR TWIN ROW JACK PANELS

ORDERING

Order popular assemblies by part number from table. If you

wish to mount components on the panels, order blank panels

and refer to MODULE INSERTS below. On special order,

various combinations of colored inserts mounted in basic

panels, as well as many different types of complete

assemblies are possible. Provide complete details with your

inquiry or order .Standard mount panels are av ailable with holes

pre-drilled for vertical designation strips, Series DS320. Add

prefix “D” to part number (JPD012000, JPD022000,

JPD072000, JPD082000, etc.).

LONG FRAME (1/4") MODULAR TWIN ROW JACK PANELS (continued)

Part Numbers*

Panel Only

JP012000

◊JP022000

◊JP032000

◊JP042000

JP052000

◊JP062000

Assembly with Jacks

Having Solder Lugs

◊JP012S32A

◊JP012S32B1

JP012S34B1

◊JP022S32A

◊JP022S32B

◊JP022S34B

◊JP032S32A

◊JP032S32B

◊JP032S34B

◊JP042S32A

◊JP042S32B

◊JP042S34B

◊JP052S32A

◊JP052S32B

◊JP052S34B

◊JP062S32A

◊JP062S32B

◊JP062S34B

None

48 MT332A

48 MT332B

48 MT334B

None

56 MT332A

56 MT332B

56 MT334B

None

48 MT332A

48 MT332B

48 MT334B

None

56 MT332A

56 MT332B

56 MT334B

None

48 MT332A

48 MT332B

48 MT334B

None

56 MT332A

56 MT332B

56 MT334B

Part N u mbers*

Panel Only

◊JP072000

◊JP082000

◊JP092000

◊JP102000

◊JP112000

◊JP122000

Assembly with Jacks

Having Solder Lugs

◊JP072S32A

◊JP072S32B

JP072S34B

◊JP082S32A

◊JP082S32B

◊JP082S34B

◊JP092S32A

◊JP092S32B

◊JP092S34B

◊JP102S32A

◊JP102S32B

◊JP102S34B

◊JP112S32A

◊JP112S32B

◊JP112S34B

◊JP122S32A

◊JP122S32B

◊JP122S34B

None1

52 MT332A

52 MT332B

52 MT334B

None2

64 MT332A

64 MT332B

64 MT334B

None

52 MT332A

52 MT332B

52 MT334B

None

64 MT332A

64 MT332B

64 MT334B

None

52 MT332A

52 MT332B

52 MT334B

None

64 MT332A

64 MT332B

64 MT334B

1. Add a “1” to the par t number to specify a cable tie bar.

Mounting Screws: #6-32, P10725 for jack mounting and #4-40,

P2435 for insert mounting, can be ordered separately.

◊Special order only; contact Switchcraft.

* Panels with jacks having wire-wrapping terminals are approximately 10%

higher in price. Contact Switchcraft.

1. Non-modularized equivalent is WEco #230A.

2. Non-modularized equivalent is WEco #231A.

Standard color is black, matte finish plastic. Contact

Switchcraft. Inserts are ideal for mounting directly in control

panels and chassis where convenient jack connections are

required. Applications include test outlets, remote equipment

connections and headsets such as those used in telephone

and telecommunications equipment.

Part Number

JP9942

JP9922

JP9902

Description

Black module insert with four jack openings

(less jacks). Includes two, #4-40 machine

screws for mounting.

Black module insert with two jack openings

(less jacks). Includes two, #4-40 machine

screws for mounting.

Black module insert without holes. Includes

two, #4-40 machine screws for mounting.

Used where no jacks are needed.

MODULE INSERTS

JP9942 JP9922 JP9902

MT-Jax®

Installed

# of

Jacks MT-Jax®

Installed

# of

Jacks

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

208

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LONG FRAME (1/4") MODULAR TWIN ROW JACK PANELS (continued)

LONG FRAME (1/4")MODULAR TWIN ROW JACK PANELS

Series JP01-2000, JP02-2000, JP07-2000, JP08-2000

Series JP03-2000, JP04-2000, JP09-2000, JP010-2000

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

209

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LONG FRAME 1/4"MODULAR TWIN ROW JACK PANELS

LONG FRAME (1/4") MODULAR TWIN ROW JACK PANELS (continued)

Series JP052000, JP062000, JP112000, JP122000

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

210

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LONG FRAME (1/4")MODULAR 3 ROW JACK PANELS

Four ser ies of cross-connect jack panels are available in 19"

and 23" widths. Individual modules are easily dismounted

from the front. On special order, panels can be supplied with

a variety of standard telephone jacks.

SERIES JP312000 AND JPD312000

2.655" x 19" size for console, rack or control panel mounting.

Mounts 24 twin jacks and 24 single jacks. Openings are on

.625" centers in each row. A twin plug fits jacks horizontally

or vertically in same quad. Bottom row has 24 single jacks.

Two Kwik®-Change designation strips are supplied. Series

JPD31 has pre-drilled and countersunk holes for mounting

vertical designation strips. See “ORDERING”.

SERIES JP322000 AND JPD322000

Same as JP312000 and JPD312000, except 23" wide

(includes 14 inserts which accommodate 28 twin jacks and

28 single jacks).

MODULE INSERTS

Available with 6 holes or blank faces. See “ORDERING”

for colored modules.

ORDERING

Order basic assemblies by part number from table. On

special order, various combinations of colored inserts

mounted in basic panels, as well as many types of

complete assemblies are possible. Provide complete

details with your inquiry or order.

Standard mount panels are available with holes pre-drilled

for vertical designation strips, Series DS320. Add prefix “D”

to part number (JPD312000, JPD322000, etc.). Refer to

“DESIGNATION STRIPS”.

LONG FRAME (1/4") MODULAR 3 ROW JACK PANELS

Part Number

JP312000

JPD312000

JP322000

JPD322000

Description

19" wide x 2.625" high panel with 12 black modules

installed.Two, full width Kwik®-Change designation

strips are included.

Same as JP312000, except holes pre-drilled for

mounting vertical designation strips at each side.

23" wide x 2.625" high panel with 14 black modules

installed.Two, full width Kwik®-Change designation

strips are included.

Same as JP322000, except holes pre-drilled for

mounting vertical designation strips at each side.

Mounting Screws: #6-32 P10725 for jack mounting and

#4-40 P2435 for insert mounting can also be ordered

separately. Contact Switchcraft.

Series JP312000, JPD312000, JP322000, JPD322000

SPECIFICATIONS

Panel and Designation Strips: Aluminum alloy,

extr uded. Black anodized per MIL-A-8625.

Module Insert: Molded plastic, matte finish. Black standard;

white, red, green, blue or yellow available on special order.

Marking Strip: White matte finish plastic.

Designation Strip Cover: Extruded clear plastic.

Screws: #6-32 x 5/16" PHMS, for jack mounting;

#4-40 x 1/2" phillips FHMS, for module inser t mounting.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

211

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TT-JAX (.173")JACK PANELS

TT-JAX®(.173") JACK PANELS SERIES 1600, A1600, B1600, C1600

SERIES 1700

Jack Panel

with optional jacks.

(See next page for specific part numbers.)

SERIES B1600 and C1600

Jack Panels with optional jacks.

(See next page for specific part numbers.)

SERIES 1600 and A1600

Jack Panels with optional jacks.

(See next page for specific part numbers.)

Series B1700

Jack Panel

with optional jacks.

(See next page for specific part numbers.)

SERIES 1600 DOUBLE ROW JACK PANELS

Black anodized panel has four inserts (24 single jacks).Double

row configuration accommodates 96 total jacks (48 pairs).Jack

spacing eliminates cross-patching of adjacent circuits when

twin plugs are used. Panel size: 1.75" x 19". Four, Kwik-

Change®designation strips for circuit identification supplied.

SERIES A1600 DOUBLE ROW JACK PANELS

Similar to Series 1600, except mounts 104 jacks. Jacks

are spaced on .312" centers for maximum jack density. Four,

Kwik-Change®designation strips supplied.

SERIES B1600 THREE ROW JACK PANELS

2.625" x 19" panel size yields high density (144 jacks). Jacks

are paired for single or twin plugs without cross-patching. Six,

Kwik-Change®designation strips supplied.

SERIES C1600 THREE ROW JACK PANELS

Similar to B1600, except maximum jack density (156 jacks).

Six, Kwik-Change®designation strips supplied.

SERIES 1700 TWIN ROW JACK PANELS

Standard 1.75" x 19" panel accepts 48 TT-Twin-Jax®jacks.

Two, Kwik-Change®designation str ips supplied.

SERIES B1700 THREE ROW JACK PANELS

Accepts 48 Tri-Jax®with alternate mounting centers to

eliminate cross-patching between adjacent circuits.Panel size:

1.75" x 19".Two, Kwik-Change®designation strips supplied.

SPECIFICATIONS

SERIES 1600, A1600, B1600, 1700, B1700

Panel and Designation Strip: Aluminum alloy, extruded.

Per QQ-A-200/8. Black anodized per MIL-A-8625C.

Black thermoplastic UL 94V-0.

Panel Inser t: Ther moplastic polyester, UL 94V-0.

Marking Strip: White matte finish plastic.

Designation Strip Cover: Extruded clear plastic.

ORDERING

1. Part number tables list jack panels with the most commonly

used jack circuits. Custom jack panels can be built on

special order to OEM requirements.Typical special

order features are:

• Lamp jack with incandescent or LED lamps.

• Solder lug or wire-wrapping terminals.

• Pre-printed designation str ips.

• TT-Switch® switches with wide switching selection.

2. Contact Switchcraft for all special order items.

SPECIFYING NOTE:

Prefix letter “D” on par t number indicates panels are drilled for

mounting vertical designation str ips on both ends. EXAMPLE -

D1600, AD1632B, WCD1634B (vertical designation strips not

included). Order DS321 for 1.734" high panels; DS350 for

2.069" high panels. See “Designation Strips” section.

The most commonly-used combinations of panels and jacks

are listed on f ollowing page .1600, A1600, B1600, C1600 panels

can be assembled with many different “bantam type” jacks.

Bussing type terminals which allow

you to buss jacks quickly and easily

are available on special order.

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

212

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TT-JAX®(.173") JACK PANELS – SERIES 1600, A1600, B1600, C1600

(continued)

Jack Data1Panel Data

Part Number

1600

D1600

1632A

D1632A

1632B

D1632B

W1632B

WD1632B

1634B

D1634B

W1634B

WD1634B

A1600

AD1600

A1632B

AD1632B

A1634B

AD1634B

WA1634B

WAD1634B

Part Number

w/o Jacks1

TT32A

TT32B

WTT32B

TT34B

WTT34B

w/o Jacks1

TT32B

TT34B

WTT34B

Quantity

104

Dimensions

19"

1.734"

Mount

Standard

SERIES 1600 AND A1600

Part Number

B1600

BD1600

B1632B

BD1632B

B1634B

BD1634B

WBD1634B

B1650

BD1650

WB1650

WBD1650

Part Number

w/o Jacks1

TT32B

TT34B

WTT34B

Note 2

Note 3

Quantity

144

Dimensions

19"

2.609"

Mount

Standard

SERIES B1600

Part Number

C1600

CD1600

C1634B

CD1634B

WC1634B

WCD1634B

Part Number

w/o Jacks1

TT34B

WTT34B

Quantity

156

Dimensions

19"

2.609"

Mount

Standard

SERIES C1600

Part Number

1700

D1700

1789

D1789

W1789

WD1789

Part Number

w/o Jacks4

TT89

WTT89

Quantity

Twin-Jax®

Dimensions

19"

1.734"

Mount

Standard

SERIES 1700

Part Number

B1700

BD1700

B1795

BD1795

WB1795

WBD1795

B1796

BD1796

WB1796

WBD1796

Part Number

w/o Jacks5

TT95

WTT95

TT96

WTT96

Quantity

48 Tri-Jax®

Dimensions

19"

1.734"

Mount

Standard

SERIES B1700

Part Number

TT505

◊TT506

◊TT507

◊TT508

◊TT509

◊TT511

Insert Description

Without jacks, 24 holes

Blank

Without jacks, 48 holes

Blank

Without jacks, 26 holes

Without jacks, 72 holes

For Panels

A1600, B1600

1600, B1600, C1600

1700

A1600, C1600

B1700

PANEL INSERTS

Jack Data Panel Data

1. Accepts indicated number of single TT-Jax®, TT-Switches®,

TT-Lamp-Jax®or any combination.

2.Three-row panel assembly with 96 TT34B Jax (top 2 rows);

and 48 TT32B Jax (bottom row).

3. Same as Note 2 above, except jacks have wire-wrapping ter minals.

4. Accepts 48 TT Twin-Jax®.

5. Accepts 48 TT Tri-Jax®.

◊Special order only; contact Switchcraft.

TT-JAX (.173")JACK PANELS

TT-JAX (.173")JACK PANELS ®

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

213

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TT-JAX (.173")JACK PANELS

TT-JAX®(.173") JACK PANELS –SERIES 1600, A1600,

B1600, C1600 (continued)

Series 1600 & A1600

Series B1600 & C1600

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

214

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TT-JAX (.173")JACK PANELS

TT-JAX®(.173") JACK PANELS – SERIES 1600, A1600,

B1600, C1600 (continued)

Series 1700

Series B1700

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

215

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MODULAR TT-JAX (.173")PANELS

Ten series of blank panels are available in 19" and 23"

widths, standard or flush mounting, and doub le , twin or three

row configurations. OEM’s can order blank components and

individual modules, jacks, switches and lamp jacks for

production line assembly according to standard or special

front panel configurations. Kwik-Change®designation strips

are supplied with panels for custom legend mar king.

Flush mounting styles can use extension legs (on special

order), for stand-off mounting from front of rack. Contact

Switchcraft for Mounting Bracket Kit K107.

SPECIFICATIONS

Panel and Designation Mounting Strip: Aluminum alloy,

extruded per QQ-A-200/8. Black anodized per MIL-A-8265C.

Marking Strip: Matte finish white plastic.

Designation Strip Cover: Extruded clear plastic.

SPECIFYING NOTE: Part numbers in table are for

blank panels only.

ORDERING

1. Order by part number from table

2. Refer to jack section to specify other jacks

and components.

Series

Number1Description2

TT51 19" double row standard mount panel. Mounts 96 single

jacks on 24 modules.

TT53 19" three row standard mount panel. Mounts 48 Tri-Jax®

jacks on 24 modules.

TT54 23" three row standard mount panel. Mounts 56 Tri-Jax®

jacks on 28 modules.

TT55 19" double row flush mount panel. Mounts 96 single

jacks on 24 modules.

TT56 23" double row flush mount panel. Mounts 112 single

jacks on 28 modules.

TT58 23" three row flush mount panel. Mounts 56 Tri-Jax®

jacks on 28 modules.

TT59 19" twin row standard mount panel. Mounts 48 TT

Twin-Jax®jacks on 24 modules.

TT60 23" twin row standard mount panel. Mounts 56 TT

Twin-Jax®jacks on 28 modules.

TT61 19" twin row flush mount panel. Mounts 48 TT

Twin-Jax®jacks on 24 modules.

TT62 23" twin row flush mount panel. Mounts 56 TT

Twin-Jax®jacks on 28 modules.

MODULAR TT-J AX®(.173") PANELS - BLANK SERIES TT51, TT53, TT56, TT59

◊Special order only. Contact Switchcraft.

1. Prefix TTD for standard mounting panels indicates predrilled holes for

mounting “X Wide” vertical designation str ips. See “Designation Strips” section.

2. Each panel includes integral designation mounting strip, marking str ips

and clear plastic covers.

3. Contact Switchcraft for any special order items.

SERIES TT53

SERIES TT56

SERIES TT59

SERIES TT51

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

216

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TT MODULE INSERTS

Module colors are black or gray (standard); red, green, blue,

white and yellow available on special order. Each module has

a matte finish front surf ace and includes two mounting scre ws

(Switchcraft P2348).

SERIES TT91

Choice of blank, two- or four-hole modules for double row

panels Series TT51, TT55 and TT56.The follo wing

components are used with Series TT91 modules:

1. Front mount TT-Jax®jacks.

2. Front mount TT-Switch®switches Series TT300FM

and WTT420FM.

3. Front mount TT Lamp Jax®lamp jacks TT420FM

and WTT420FM.

SERIES TT92

Blank, two- or four-hole modules for twin row panels Series

TT59, TT60, TT61 and TT62. TT Twin-Jax®jacks are used

with these modules.

SERIES TT93

Blank, three- or six-hole modules for three row panels

Series TT53, TT54, TT57 and TT58.Tri-Jax®jacks are

used with these modules.

SPECIFICATIONS

Module: Precision molded thermosetting plastic in colors.

Mounting Screws: Black zinc, #3-48 x .312" flat head

machine screws.

ORDERING

1. Order by part number from tables.

2. Contact Switchcraft for any special order items.

SPECIFYING NOTE: The part numbers listed on this

page are for modules only. Refer to following page for

specifying panel assemblies with components installed.

Red

Black

Green

Blue

White

Yellow

Gray

◊TT91401

◊TT91402

◊TT91403

◊TT91404

◊TT91405

◊TT91408

◊TT91411

◊TT91201

◊TT91202

◊TT91203

◊TT91204

◊TT91205

◊TT91208

TT91211

Blank

◊TT91001

◊TT91002

◊TT91003

◊TT91004

◊TT91005

◊TT91008

◊TT91011

SERIES TT91 SERIES TT92

TT MODULE INSERTS – SERIES TT91, TT92 AND TT93

Openings

SERIES TT91 (For Double Row Panels)

Red

Black

Green

Blue

White

Yellow

Gray

◊TT92401

◊TT92402

◊TT92403

◊TT92404

◊TT92405

◊TT92408

◊TT92411

◊TT92201

TT92202

◊TT92203

◊TT92204

◊TT92205

◊TT92208

TT92211

Blank

◊TT92001

◊TT92002

◊TT92003

◊TT92004

◊TT92005

◊TT92008

◊TT92011

Openings

SERIES TT92 (For Twin Row Panels)

Red

Black

Green

Blue

White

Yellow

Gray

TT93601

TT93602

TT93603

TT93604

TT93605

TT93608

TT93611

◊TT93301

TT93302

◊TT93303

◊TT93304

◊TT93305

◊TT93308

TT93311

Blank

TT93001

TT93002

TT93003

TT93004

TT93005

TT93008

TT93011

Openings

SERIES TT93 (For Three Row Panels)

◊Special order only; contact factory for price and delivery.

TT91402

(black, 4 hole) TT91202

(black, 2 hole) TT91002

(black, blank) TT92402

(black, 4 hole) TT92202

(black, 2 hole) TT93002

(black, blank)

TT93302

(black, 3 hole)

TT93602

(black, 6 hole)

TT92002

(black, blank)

Color

SERIES TT-93

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

217

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

SERIES TT5102000*

Modular double row, 1.75" high x 19" wide, standard mount.

Supplied with 24 black modules, designation strips, and

covers. Mounts 96 TT-Jax®single jacks, lamp jacks and/or

switches.

SERIES TT51020001*

Modular double row, 1.75" high x 19" wide, standard mount.

Supplied with 24 black modules, designation strips, and

covers. Mounts 96 TT-Jax®single jacks, lamp jacks and/or

switches. Comes supplied with cable tie bar.

SERIES TT5202000*

Similar to TT5102000, except 23" wide. Supplied with 28

black modules, designation strips, and covers. Mounts 112

TT-Jax®single jacks, jack lamps and/or switches.

SERIES TT5502000

Modular double row, 1.75" high x 19" wide, flush mount.

Supplied with 24 black modules, designation strips, and

covers. Panels can be mounted flush with rack/control panel

surf ace, or use with e xtension legs f or standoff mounting with

easy access to rear of jacks for testing/monitoring. Mounts

96 TT-Jax®single jacks, lamp jacks and/or switches.

SERIES TT5602000

Similar to TT5502000, except 23" wide. Supplied with 28

black modules, designation strips, and covers. Mounts 112

TT-Jax®single jacks, jack lamps and/or switches.

ORDERING

1. Order par t number from table

2. Contact Switchcraft for any special order items.

3. Separate components can be ordered.

*Prefix TTD indicates panel is pre-drilled with countersunk

holes for mounting “X-Wide” vertical designation str ips.

See “DESIGNATION STRIPS” section.

Part Number

TT5102000

◊TT5102S31

◊TT5102W31

TT5102S32A

TT5102W32A

TT5102S32B2

TT5102W32B

◊TT5102S33B

◊TT5102W33B

TT5102S34B2

TT5102W34B

TTD5102000

TTD5102S31

Through

TTD5102W34B

TT5202000

TTD5202000

TT5202S31

Through

TT5202W34B

TTD520231

Through

TTD5202W34B

TT552000

TT5502S31

Through

TT5502W34B

TT5602000

TT5602S31

Through

TT5602W34B

Part Number

without jacks

TT31FM

WTT31FM

TT32AFM

WTT32AFM

TT32BFM

WTT32BFM

TT33BFM

WTT33BFM

TT34BFM

WTT34BFM

without jacks

Note1

without jacks

Note1

without jacks

Note1

without jacks

Note1

Qty.

112

Width

19"

23"

19"

23"

Mount

Stan-

dard

Stan-

dard

Flush

Modules

(Black)

MODULAR TT-J AX®(.173") JACK PANELS –

SERIES TT5102000, TT5202000, TT5502000, TT5602000

Jack Data Panel Data

◊Special order only; contact Switchcraft for price and delivery.

1 Complete panel par t number with jacks installed can be constructed as

shown for Series TT51.

2. Add a “1” to par t number to specify cable tie bar.

Series TT5102000,

TT5202000 (Typical)

Series TT5502000,

TT5602000 (Typical)

Shown w/mounting bracket K107

(not supplied).

MODULAR TT-JAX (.173")JACK PANELS

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

218

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MODULAR TT-J AX®(.173") JACK PANELS –

SERIES TT5102000, TT5202000,

TT5502000, TT56020000 (continued)

MODULAR TT-JAX (.173")JACK PANELS

Series TT51-02000,TT52-02000 (Typical)

Series TT55-02000,TT56-02000 (Typical)

Jack Panel Dimensions - inch (mm)

Series

Number A B C D

TT51 19 (482.6) 18.3 (465.1) 1.013 (25.7) -

◊TT52 23 (584.2) 22.3 (566.7) 1.648 (41.9) -

TT55 19 (482.6) 18.3 (465.1) 1.013 (25.7) 17.125 (435)

TT56 23 (584.2) 22.3 (566.7) 1.648 (41.9) 21.125 (536.6)

◊Special order only; contact Switchcraft for price and delivery.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

219

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TT-JAX (.173")TWIN ROW AND THREE ROW JACK PANELS

SERIES TT5902000*

Modular twin row, 1.75" high x 19" wide, standard mount.

Supplied with 24 black modules, designation strips, and

cov ers . Mounts 48 TT Twin-Jax®twin jacks.

SERIES TT6002000*

Similar to TT5902000, except 23" wide. Supplied with 28

black modules, designation strips, and covers. Mounts 56 TT

Twin-Jax®twin jacks.

SERIES TT6102000

Modular twin row, 1.75" high x 19" wide, flush or standoff

mount. Supplied with 24 black modules, designation strips,

and covers. Mounts 48 TT Twin-Jax®twin jacks.

SERIES TT6202000

Similar to TT6102000, except 23" wide. Supplied with 28

black modules, designation strips, and covers. Mounts 56 TT

Twin-Jax®twin jacks.

SERIES TT5302000*

Modular three row, 1.75" high x 19" wide, standard mount.

Supplied with 24 black modules, designation strips, and

covers. Designed for LINE, EQUIP and MONITOR patch

connections. Mounts 48 Tr i-Jax®triple jacks.

SERIES TT5402000*

Similar to TT5302000, except 23" wide. Supplied with

28 black modules, designation strips, and covers. Mounts 56

Tri-Jax®triple jacks.

SERIES TT5702000

Modular three row, 1.75" high x 19" wide, flush or standoff

mount. Supplied with 24 black modules, designation strips,

and covers. Mounts 48 Tr i-Jax®triple jacks.

SERIES TT5802000

Similar to TT5702000, except 23" wide. Supplied with

28 black modules, designation strips, and covers. Mounts

56 Tri-Jax®triple jacks.

ORDERING

1. Order par t number from table

2. Contact Switchcraft for any special order items.

*Prefix TTD indicates panel is pre-drilled with countersunk

holes for mounting “X-Wide” vertical designation strips.

See “DESIGNATION STRIPS” section.

TT-JAX®(.173") TWIN ROW AND THREE ROW JACK PANELS

Part Number

TT5902000

TT5902S89

TT5902W89

TTD5902000

TTD5902S89

TTD5902W89

TT6002000

TTD6002000

TT6002S89

TT6002W89

TTD6002S89

TTD6002W89

TT6102000

TT6102S89

TT6102W89

TT6202000

TT6202S89

TT6202W89

TT5302000

◊TT5302S95

TT5302W95

◊TT5302S96

TT5302W96

TTD5302000

TTD5302S95

Through

TTD5302W96

TT5402000

TTD5402000

TT5402S95

Through

TT5402W96

TTD5402S95

Through

TTD5402W96

TT5702000

TT5702S95

Through

TT5702W96

TT5802000

TT5802S95

Through

TT5802W96

Part Number

without jacks

TT89FM

WTT89FM

without jacks

TT89FM

WTT89FM

without jacks

Note1

None

Note1

without jacks

Note1

without jacks

TT95FM

WTT95FM

TT96FM

WTT96FM

without jacks

Note2

without jacks

Note2

without jacks

Note2

without jacks

Note2

Qty.

Width

19"

23"

19"

23"

19"

23"

19"

23"

Mount

Stan-

dard

Flush

Stan-

dard

Stan-

dard

Flush

Modules

(Black)

Jack Data Panel Data

◊Special order only; contact Switchcraft for price and delivery.

1. Complete panel par t number with jacks installed can be constructed as

shown for Series TT59 or TTD59.

2. Complete panel par t number with jacks installed can be constructed as

shown for series TT53.

Series TT5302000,TT5402000 (Typical)

Series TT5902000

Series TT6102000

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

220

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TT-JAX®(.173") TWIN ROW AND THREE ROW JACK PANELS (continued)

Series TT5902000 and

TT6002000 (Typical)

Series TT6102000 and

TT6202000 (Typical)

Series TT5302000 and

TT5402000 (Typical)

Series TT5702000 and

TT5802000 (Typical)

Series TT5702000 and

TT5802000 (Typical)

TT-JAX (.173")TWIN ROW AND THREE ROW JACK PANELS

Jack Panel Dimensions - inch (mm)

Series

Number A B C D

TT59 19 (482.6) 18.3 (465.1) 1.013 (25.7) -

TT60 23 (584.2) 22.3 (566.7) 1.648 (41.9) -

TT61 19 (482.6) 22.3 (566.7) 1.013 (25.7) 17.125 (435)

TT62 23 (584.2) 22.3 (566.7) 1.648 (41.9) 21.125 (536.6)

Jack Panel Dimensions - inch (mm)

Series

Number A B C D

TT53 19 (482.6) 18.3 (465.1) 1.013 (25.7) -

TT54 23 (584.2) 22.3 (566.7) 1.648 (41.9) -

TT57 19 (482.6) 22.3 (566.7) 1.013 (25.7) 17.125 (435)

◊TT58 23 (584.2) 22.3 (566.7) 1.648 (41.9) 21.125 (536.6)

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

221

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TT-JAX®(.173") CONNECTORIZED JACKFIELDS –

SERIES TT, 2-WIRE, 4-WIRE, 6-WIRE

2-wire TT-Connectorized Jackfield

TT2W48VCF1

4-wire TT-Connectorized Jackfield

TT4W24MCF1

6-wire TT-Connectorized Jackfield

TT-JAX (.173") CONNECTORIZED JACKFIELDS

2-WIRE TT -CONNECTORIZED JACKFIELDS, SERIES TT

Contains 48, 2-wire circuits. Arrangements include:

LINE-DROP or Signal E/M, or LINE-DROP-MON. Available

with MONITOR jack row. On rear panel, LINE connectors are

receptacles and DROP connectors are plugs. LINE and DROP

circuits ma y be isolated from each other for separate monitoring.

On special order, 48 circuits LINE/COMBINATION DROP/MON

or 96 circuits, LINE/DROP or Signal E/M may be specified.

2-WIRE TT-CONNECTORIZED PC JACKFIELD,

SERIES TTPC

Same as 2-Wire TT-connectorized jackfields above, except all

connections are machine-soldered on a double-sided PC

board instead of hand wired.

4-WIRE TT-CONNECTORIZED JACKFIELDS,

SERIES TT

4-Wire jackfields have 24, 4-wire circuits for MOD-DEM/EQ

IN-EQ OUT/MON patching, or may be used for other 4-wire

patching applications. Can be supplied with or without

MONITOR jack row. On rear panel, MOD AND EQ IN

connectors are receptacles and DEM and EQ OUT

connectors are plugs.

6-WIRE TT-CONNECTORIZED JACKFIELDS,

SERIES TT

6-Wire jackfields contain 48, 6-wire circuits for MOD-DEM/EQ

IN EQ OUT/MON/SIG LINE/SIG EQ patching with toll test

boards. Available with or without MONITOR jack row. On rear

panel, MOD, EQ IN and SIG LINE connectors are receptacles

and DEM, EQ OUT and SIG EQ connectors are plugs. The

following can be specified on special order: 12 circuits,

DEM-MOD/EQ IN-EQ OUT/MON/SIG E/M; 48 circuits, signal

E/M leads separated; 48 circuits for D3 channel banks.

ORDERING

1. Order by part number from tables.

2. Contact Switchcraft for any special order items.

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

222

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TT-JAX (.173") CONNECTORIZED JACKFIELDS

SPECIFICATIONS

Panel and Integral Designation Strip: Aluminum alloy,

extr uded per QQ-A-200/8. Black anodized per MIL-A-8265.

Modules: Precision-molded thermosetting plastic. Black

standard. Other colors on special order.

Mounting Screws: Black zinc, #3-48 x 312" flat head

machine screw.

TT-Jax®Jacks: See jacks section for TT-Jax®specifications.

Marking Strip: Matte finish white plastic.

Vertical Designation Strip: Extr uded aluminum, black

anodized.

Back Frames: Cold rolled steel, zinc-plated with iridescent

tarnish-resistant finish.

Screws, Nuts and Lockwashers: Steel, clear iridite

tarnish-resistant finish over zinc-plating.

Connectors: 50-pin micro/pierce plugs and receptacles.

Cable Tie Bar: Aluminum hexagon alloy. 6061-T6, clear ir idite

finish per MIL-C-5541 (not hinged versions only).

Cables: 25 pair, 24 AWG solid copper wire, tinned and

annealed, covered with insulating grade thermoplastic jacket.

Cable Ties: Thermoplastic, locking-non-releaseable,

30 pounds minimum loop tensile strength.

TT-JAX®(.173") CONNECTORIZED JACKFIELDS –

SERIES TT, 2-WIRE, 4-WIRE, 6-WIRE (continued)

TT-JAX (.173") CONNECTORIZED JACKFIELDS

2- & 4-Wire Connectorized Jackfields

(4-Wire Style Shown)

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

223

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

1. Compose par t numbers from data below to specify your

jackfield...or use the table to order popular jackfields. SPECIFYING NOTE: Any jackfield can be manufactured

with AMP CHAMP connectors. Contact Switchcraft.

PART NUMBERS

TT-JAX®(.173") CONNECTORIZED JACKFIELDS (continued)

T T 2 W 2 4 CV 1F

JACK TYPE

TT - .173"

JP - LONG FRAME (1/4")

MONITOR JACK

V - WITHOUT

M - WITH

RACK MOUNTING

1 - 19 inch

2 - 23 inch

TYPE OF HINGE

F - FRONT PANEL HINGED

R - REAR PANEL HINGED

N - NON-HINGED

WIRE TERMINA TION

C - AMPHENOL BLUE RIBBON

B - AMP CHAMP

W - TERMINAL BLOCK

UNIT TYPE

2W - 2 WIRE

4W - 4 WIRE

6W - 6 WIRE

NUMBER OF

CIRCUITS

TYPICAL PART NUMBERS

TT-JAX (.173") CONNECTORIZED JACKFIELDS – PART NUMBERS

2-WIRE JACKFIELDS

Part Number Description

TT2W48VCF1 Hinged front panel.

TT2W48VCN1 Front panel NOT hinged.

TT2W48MCF1 Same as TT2W48VCF1, except with MONITOR jack row.

TT2W48MCN1 Same as TT2W48VCN1, except with MONITOR jack row.

4-WIRE JACKFIELDS

Part Number Description

TT4W24MCF1 Hinged front panel with MONITOR jack row.

TT4W24MCN1 Front panel NOT hinged with MONITOR jack row.

TT4W24VCF1 Same as TT4W24MCF1, except no MONITOR jack row.

TT4W24VCN1 Same as TT4W24MCN1, except no MONITOR jack row.

6-WIRE JACKFIELDS

Part Number Description

TT6W48MCF1 Hinged front panel with MONITOR jack row.

16J1055 Hinged front panel with MONITOR jack row.

TT6W48MCN1 Front panel NOT hinged with MONITOR jack row.

TT6W48VCF1 Same as TT6W48MCF1, except no MONITOR jack row.

TT6W48VCN1 Same as TT6W48MCN1, except no MONITOR jack row.

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

224

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TYPICAL CIRCUIT ARRANGEMENTS - 2-WIRE

TYPICAL CIRCUIT ARRANGEMENTS - 4-WIRE

TYPICAL CIRCUIT ARRANGEMENTS - 6-WIRE

TT-JAX®(.173") CONNECTORIZED JACKFIELDS (continued)

TT-JAX (.173") CONNECTORIZED JACKFIELDS SCHEMATICS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

225

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TT-JAX®(.173") CONNECTORIZED JACKFIELDS (continued)

TT-JAX (.173") CONNECTORIZED JACKFIELDS SCHEMATICS

No.TT2W48VCF1 (hinged)

No.TT2W48VCN1 (not hinged)

(Hinged version shown)

TYPICAL CIRCUIT ARRANGEMENT

No.TT2W48MCF1 (hinged)

No.TT2W48MCN1 (not hinged)

(Non-Hinged version shown)

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

226

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TT-JAX (.173") CONNECTORIZED JACKFIELDS SCHEMATICS

TT-JAX®(.173") CONNECTORIZED JACKFIELDS (continued)

No.TT4W24VCF1 (hinged)

No.TT4W24VCN1 (not hinged)

(Hinged version shown)

TYPICAL CIRCUIT ARRANGEMENT

No.TT4W24MCF1 (hinged)

No.TT4W24MCN1 (not hinged)

(Non-Hinged version shown)

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

227

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TT-JAX®(.173") CONNECTORIZED JACKFIELDS (continued)

TT-JAX (.173") CONNECTORIZED JACKFIELDS SCHEMATICS

No.TT6W48MCF1 (hinged) No.TT6W48VCF1 (hing ed)

No.TT6W48MCN1 (not hinged) No.TT6W48VCN1 (not hing ed)

(Hinged version shown)

TYPICAL CIRCUIT ARRANGEMENT

No.TT6W48MCF1 (hinged)

No.TT6W48MCN1 (not hinged)

(with Monitor Jacks)

No.TT6W48VCF1 (hinged)

No.TT6W48VCN1 (not hinged)

(no Monitor Jacks)

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

228

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TT-JAX®(.173") CONNECTORIZED JACKFIELDS

TT-JAX (.173") CONNECTORIZED JACKFIELDS SCHEMATICS

REAR VIEW —RO T ATED

TYPICAL CIRCUIT ARRANGEMENTS

No. 16J-1055

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

229

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TT-Jax®(.173") CONNECTORIZED JACKFIELDS

TT-JAX®(.173”) CONNECTORIZED JACKFIELDS

* Please visit the product pages on our website for the most up-to-date product information

TT45106 TT45124 TT45148 TT45206 TT45224

TT45248 TT45306 TT45324 TT45348

TT45406 TT45424 TT45448 TT4506 TT45524

TT45548 TT45806 TT45824 TT45848

JACK PANELS

230

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TT LAMPS AND JEWEL ASSEMBLIES

SERIES TT-450 LAMPS

Red LED and series dropping resistor are molded into

compact cartridge with bi-pin terminals for use with TT

Lamp-Jax®lamp j a cks.Colored bezels are molded in f or color

coding of functions; colors are black, red, green, white and

yellow. On special order, blue or other colors are available.

Standard voltages are 6, 24 and 48 V (DC only).No tools are

required f or lamping/relamping.Simply slip TT-LED into lamp

jack with (+) terminal up .If it doesn’t light, remove it, rotate it

180°, and reinser t it into jack.

SPECIFICATIONS

Housing: Molded black plastic.

Bezel: Molded plastic in colors.

LED: Red illumination.

Pins: T-1 3/4 bi-pin configuration.

FLASHING/STEADY ON LEDS

Yellow, green and red LEDs are 2-pin car tr idge plug-ins which

operate from a 48 VDC supply. When 48 V is applied, LED

flashes for 30 seconds, then changes to steady “On” condition.

SPECIFICATIONS

Body: Thermoplastic, UL 94V-0 rated.

LED Colors: Yellow, green or red.

TT®LAMPS AND JEWEL ASSEMBLIES

ORDERING

1. Order by part number from table.

2. For special order items, such as other LED colors,

voltages, lamps with 25% reduced power consumption,

etc., contact Switchcraft.

Part Number Description

15J9068 Red flashing/continuous

15J9076 Yellow flashing/continuous

15J9077 Green flashing/continuous

15J9078 Amber flashing/continuous

SCHEMATIC

TT-JEWEL ASSEMBLY

Jewel assemblies use bi-pin lamp and act as lighted jewel and

lamping/relamping tool. Simply slip bi-pin lamp in brass collar

and inser t lamp with pins in vertical plane. Lamp automatically

seats properly.Jewel is molded plastic in colors;sleev e is br ass .

Part Number Color Part Number Color

TT401 Red TT408 Yellow

TT403 Green TT413 Amber

TT404 Blue TT510 Black*

TT405 White *Used as hole plug where

no jack is installed.

LAMPS

Part Number Description

P2290 6.3 V, GE No. 7377.

P2315 6.3 V, GE No.7381. Avg. life:50K hrs. @ 200 mA.

P2316 28 V, GE No.7387. Avg. life: 25K hrs. @ 40 mA.

P2456 24 V, GE No. 7001.

Panel with TT-Jewel Assemblies

and TT-Switches installed

Steady “On” Lamp

Series TT450 Blinking/Steady

“On” Lamp

TT-LED Lamps

Installed

Part Bezel Part Bezel

Number Voltage Color Number Voltage Color

TT45106 6◊TT45406 6

TT45124 24 ◊TT45424 24

TT45148 48 ◊TT45448 48

TT45206 6TT45506 6

TT45224 24 TT45524 24

TT45248 48 TT45548 48

TT45306 6TT45806 6

TT45324 24 TT45824 24

TT45348 48 TT45848 48

Red

Black

Green

Blue

White

Yellow

Series TT-450 TT-LED Lamps

Flashing/Steady “On” Lamps

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

231

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LONGFRAME SWITCHBOARD SWITCHES

Premium quality, long frame switches, designed especially for

jack panel mounted switching. Standard actuations are

push-lock/pull-release , 2-position turn button and 3 position turn

button. Many contact forms available. Mounts in Switchcraft

Jack Panels Series 1200, 1400, 2400, 2600, 2800, modular JP®

jack panels, and other standard telephone jack panels. Part

numbers in table indicate “A” frame. For same switch with “C”

frame, add prefix “C” to part number. Many circuit forms not

shown in tab les are a v ailab le on special order.Long leaf springs

hav e no forms at point of flexing, which insures long lif e .Welded

crossbar palladium contacts rated at 2A 200W maximum are

standard. Fine silver (for higher currents) or gold alloy (dry circuit

to 1A) contacts are av ailab le on special order .Contact Switchcraft.

SPECIFICATIONS

Frame, Screws and Twin Nut: Steel, plated.

Springs, Pressure Plate and Terminals: Copper alloy.

Solder lugs are tin-dipped.

Contacts: Welded crossbar palladium are standard. Fine sil-

ver or gold alloy are available on special order.

Insulation: Rigid plastic. Extruded plastic tubing through

stack.

Knob: Molded black plastic.Tur n-key type faced with white

arrow.

Bushing: Copper alloy, nickel-plated.

ORDERING

1. Order by part number from table.

2. For special order items, contact Switchcraft.

LONGFRAME SWITCHBOARD SWITCHES

◊11201L ◊11201 1-A

◊11202L ◊11202 1-B

11203L 11203 1-C

◊W11203L ◊W11203

◊11203DL ◊11203D 1-D

◊11204L ◊11204 2-A

◊11205L ◊11205 2-B

11206L 11206 2-C

◊W11206L ◊W11206

◊11206DL ◊11206D 2-D

◊11208L ◊11208 4-A

◊11209L ◊11209 3-C

◊11212L 11212 4-C

◊W11212L ◊W11212

TURN BUTTONS - SERIES 11200

Part Numbers

Locking Momentary Circuit

◊11001L ◊11001 1-A

◊11002L ◊11002 1-B

11003L 11003 1-C

◊W11003L ◊W11003

◊11003DL ◊11003D 1-D

◊11004L ◊11004 2-A

◊11005L ◊11005 2-B

11006L 11006 2-C

◊W11006L ◊W11006

◊11006DL ◊11006D 2-D

◊11008L ◊11008 4-A

◊11009L ◊11009 3-C

◊11012L 11012 4-C

◊W11012L ◊W11012

PUSHBUTTONS - SERIES 11000

◊Special order only; contact Switchcraft.

Mounting Screws: #6-32, P10725, can be ordered separately.

Contact Switchcraft. (Screws not supplied with switches.)

SERIES 11000 and 11200

W11012L 11206L

“T-Switch” Switches

Basic Schematic Circuits

ABCDEF

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

232

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

DUMMY PLUGS AND HOLE PLUGS

When inserted into a standard size telephone jack, the dummy

plug actuates springs like a normal plug, except no signal is

conducted through since the plug is made of non-conducting

plastic.Dummy plugs can also be used to plug-up unused jacks

to prevent accidental inser tion of an incorrect plug.

SERIES 491: 3-conductor with .206" diameter finger. Mates

with MT342B and MT344B MT-Jax®, Series M Hi-D Jax®, and

other standard telephone jacks having .21" inside diameter

sleeves.

SERIES 492: 3-conductor with .25" diameter finger .Mates with

3-conductor MT-Jax®and Series M Hi-D Jax®, and other

standard telephone jacks have .25" inside diameter sleeves.

SERIES 493: 2-conductor with .25" diameter finger .Mates with

2-conductor MT-Jax®, Series M Hi-D Jax®, and other standard

telephone jacks having .25" inside diameter sleeves.

DUMMY PLUGS AND HOLE PLUGS

Description Interchangeable

with

Part No. Conductors Color WEco Trimm

49101 3Red – –

49102 3Black – –

49105 3White – –

49201 3Red 258F 558D

49202 3Black 258C 558C

49205 3White 258E 558E

49301 2Red 165F 556D

49302 2Black 165C 556C

49305 2White 165E –

Used to seal off unused holes in jack

panels, Series 1200, 1400, 2400, 2600

and JP012000 through JP122000.

Constructed of dimensionally stable

molded black plastic.

PLASTIC HOLE PLUG

Hole Plug P1801

Part

Number

491 492 493

No. 491 No. 492 No. 493

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

233

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TT (BANTAM)CIRCUIT GUARD PLUGS

TT®(BANTAM) CIRCUIT GUARD PLUGS

Part Number Part Number Part Number Color

TT5121 TT5131 TT5141* Red

TT5122 TT5132 TT5142* Black

TT5123 TT5133 TT5143* Green

TT5124 TT5134 TT5144* Blue

TT5125 TT5135 TT5145* White

TT5128 TT5138 TT5148* Yellow

*Includes base, marking strip & cover.

Cover

Series

514

Series TT512 Series TT513

Base

APPLICATION

Circuit guard plugs snap into TT-Jax®(bantam)

jacks eliminating accidental or unauthorized

inser tion of a plug into a critical circuit.The circuit

guards plugs do not actuate the jack springs.

These plugs seal the jack bushing and provide

an additional means of circuit identification.

Circuit guard plugs are available in three

different designs: Series TT512, Series TT513

and Series TT514. All three designs are molded

thermoplastic and are available in the following

colors: red, black, green, blue, white or yellow.

SERIES TT512

TT512 circuit guard plugs cover an individual

jack opening and insert to an virtually flush

position with the front panel.

SERIES TT513

TT513 circuit guard plugs are similar to the

Series TT512 except the button extends

.219" from the front of the panel for easier

removal.

SERIES TT514

TT514 circuit guard plugs cover both the IN and

OUT jacks of tw o adjoining circuits while leaving

the monitor jacks exposed for circuit testing.

The four jack circuit guard plugs also include a

matte finish white plastic marking strip and

a clear extruded plastic window for additional

designation.

SPECIFICATIONS

TT512 and TT513: Molded thermoplastic in colors.

TT514: Base: Molded ther moplastic in colors.

Marking Strip: Matte finish white plastic.

Cover: Clear extruded plastic.

ORDERING

1. Order by part number from table.

2. Contact Switchcraft f or any special order items.

Marking Strip

Series TT-512 Series TT-513 Series TT -514

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

234

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MINIATURE, DUMMY PLUGS, HOLE PLUGS

Terminating, dummy and looping plugs are designed for

use with Tini-Telephone®Jacks. TT-Phone Plugs are also

recommended for use on other miniature telephone jacks

with same bushing inside diameter and compatible tip

and/or ring spr ing configurations.

TT-TERMINATING PLUGS

TT-Phone Plug terminating plugs are used to terminate a

circuit with a specific resistive load.A precision 1/2 watt, ± 1%

resistor is molded into the handle of each terminating plug.

See “PLUG SCHEMATICS” for resistor wiring. Resistance

value is marked on plug handle. Other resistance values are

available on special order.

TT-DUMMY PLUGS

TT-Phone Plug dummy plugs are designed to be inserted into

phone jacks to actuate shunt and isolated switching circuits.

TT-LOOPING PLUGS

TT-Phone Plug looping plugs are used to loop or patch

adjacent jack circuits. See “PLUG SCHEMATICS” for wiring.

TT-HOLE PLUG

TT-Hole Plugs are used to close off unused openings in all

Switchcraft TT-Jack Panels. Molded of black plastic with brass

sleeve.

ORDERING

1. Order by part number from table.

2. Contact Switchcraft for any special order items.

SPECIFICATIONS

Series TT200 Tip Rod, Ring and Sleeve:

Brass per QQ-B-626.

Handle: Molded PVC, ivory or black.

Series TT515: Molded of dimensionally stable plastic

in black, red or white.

MINIATURE, DUMMY PLUGS, HOLE PLUGS

Part No. Description Schematic Color

◊TT201 2-conductor terminating-135Ω1Gray

◊TT202 2-conductor terminating-600Ω1Gray

TT203 3-conductor terminating-135Ω2Gray

TT204 3-conductor terminating-600Ω2Gray

TT205 2-conductor dummy 5 Gray

TT206 3-conductor dummy 6 Gray

◊TT207 2-conductor twin looping 3 Gray

TT208 3-conductor twin looping 4 Gray

TT209 2-conductor twin dummy 5 Ivory

TT210 3-conductor twin dummy 6 Ivory

TT510 Hole Plug – Black

TT5151 2- or 3-conductor dummy – Red

TT5152 2- or 3-conductor dummy – Black

TT5155 2- or 3-conductor dummy – White

◊Special order only; contact Switchcraft for price and delivery.

TT203

TT-Terminating

Plug

TT205

TT-Dummy

Plug TT207 TT-T win

Looping Plug

TT515

TT-Dummy

Plugs

TT510

Hole

Plug

TT5152 or TT206

TT210

Plug Schematics

Nos.TT-201,TT-202,TT-205 Nos.TT-207,TT-209 Nos.TT-515-1, -2

Nos.TT-203,TT-204,TT-206 Nos.TT-208,TT-210 Nos.TT-510

123456

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

235

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

DESTINATION STRIPS

Designation strips with protective covers are supplied with all

tini-telephone®jack panels, jackfields and certain standard

jack panels. Replacement kits and individual parts are also

available. Legends can be marked in pencil, ink, or lettering

transfers. Kwik-Change®is the name of all horizontal strips.

See illustration.

Three types of designation strips are available as accessories:

1. Kwik-Change single height.

2. Kwik-Change double height.

3. X-Wide vertical.

KWIK-CHANGE®DESIGNATION STRIPS

(SINGLE HEIGHT)

Two types of single height designation str ips are available:

1. SERIES 1600, A1600, B1600, C1600, 1700, B1700,

1400300, 2600300, JP012000 through JP122000

• Extruded aluminum mounting strip

• Four mounting screws

• Marking str ips

• Clear plastic strip covers

Mounting strips are fastened with four mounting screws

provided. Marking str ip slides into the clear plastic cover, and

cover is snapped into place on the mounting strip. Legends

can be marked in pencil, ink, lettering transf ers, type writer , etc.

SPECIFICATIONS

(Used on panels 1600, A1600, B1600, C1600, 1700, B1700)

Mounting Strip: Extr uded aluminum black anodized

Cover: Clear extruded plastic.

Marking Strip: White matte finish plastic.

Screws: Copper alloy, plated.

(Used on panels 1400300, 1600300)

Mounting Strip: Aluminum alloy, extr uded, black anodized.

Cover: Clear extruded plastic.

Marking Strip: White matte finish plastic.

Screws: Steel, plated.

SERIES TT51 through TT62, TT-Connectorized (2-, 4- and

6-Wire), JP012000 through JP122000, TTPC and DSX

panels. Mounting strips are extruded as part of the panel.

Otherwise, use is the same as above.

ORDERING

Order by part number from table.

DESIGNATION STRIPS

Kwik-Change Designation Strip

Kit Number DS301 (single height)

Kwik-Change Designation Strip

Kit Number DS318 (single height)

Kwik-Change Designation Strip

Kit Number TT501 (single height)

Kwik-Change Designation Strip

Kit Number TT516 (single height)

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

236

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

DESIGNATION STRIPS

KWIK-CHANGE®DESIGNATION STRIPS

(DOUBLE HEIGHT)

Double height strips allow larger legends. Can be factory

installed on Series 1600, B1600, 1700 and B1700 panels, or

may be ordered separately for customer installation.

• Series 1600/B1600: Four strips can be mounted, two

above each row of jack openings.

• Series 1700: Two strips can be mounted, two above or

two below (special order) the double row of jack openings.

• Series B1700: Two strips can be mounted (side-by-side)

above top row of jacks.

NOTE:When TT516 kits are mounted abov e top row of jacks on

Series 1600, B1600 and B1700, strips will overhang top edge

of panel by .156 inches For most applications, the strips help

seal the normal opening between adjacent panels. Series

B1700 panel mounting screws may have to be loosened to

facilitate remov al of the panel abo v e it in this type of installation.

SPECIFICATIONS

Mounting Strip: Black thermoplastic UL 94V-0.

Cover: Clear plastic.

Marking Strip: Matte finish white plastic.

Mounting Screws: Copper alloy, plated.

ORDERING

1. Order by par t number from table.

2.To order double height strips installed on panels,

contact Switchcraft.

SINGLE HEIGHT DESIGNATION STRIPS

Part No. Description For Panels

DS301 Kit (single height) includes: 1400301,

1-mounting strip (17" long) 2600301

1-cover

1-marking strip sheet

(5 strips per sheet)

4-mounting screws

DS302 Cover (used with Kit DS301) –

DS303 Marking strip sheet (used with

Kit DS301 and DS316). –

DS306 Marking strip sheet (used with –

Kit DS307 and DS308).

DS307 Kit (single height) includes: JP012000,

2-covers (16.5" long) JP032000,

1-marking strip sheet JP052000

(5 strips per sheet)

DS308 Kit (single height) includes: JP022000,

2-covers (19.5" long) JP042000,

1-marking strip sheet JP062000

(5 strips per sheet)

DS316 Kit (single height) includes: JP072000

2-covers (16.25" long) JP092000,

1- marking strip sheet JP112000

(5 strips per sheet)

DS317 Marking strip sheet (used with –

Kit DS318).

DS318 Kit (single height) includes: JP082000

2-covers (20" long) JP102000,

1- marking strip sheet JP122000

(5 strips per sheet)

Part No. Description For Panels

TT501 Kits (single height) includes: 1600, 1700

1-mounting strip (8.375" long) (Alter nate

1-cover spacing)

1-marking strip sheet

(5 strips per sheet)

4-mounting screws

TT502 Marking Strip sheet (used with –

Kit TT501 & TT521)

TT503 Cover (used with Kit –

TT501 and TT504)

TT504 Kits (single height) includes: A1600, C1600

1-mounting strip (8.375" long) (Continuous

1-cover spacing)

1-marking strip sheet

(5 strips per sheet)

4-mounting screws

TT519 Kit (single height) includes: TT52, TT54

2-covers (9.61" long) TT56, TT58

1- marking strip sheet TT60, TT62

(5 strips per sheet) (23" Panels)

TT520 Marking strip sheet (used with –

Kit TT519)

TT521 Kit (single height) includes: TT51, TT53

2-covers (8.25" long) TT55, TT57

1- marking strip sheet TT59, TT61,

(5 strips per sheet) Connectorized

Jackfields

(2-, 4- and 6 wire)

Single Height Kwik-Change®

Designation Strip,TT501

DESIGNATION STRIPS (continued)

Series B1600

Double Height Kwik-

Change Designation

Strip,TT516

Series 1700

Series B1700

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

237

JACK PANELS

FAX: 773 792-2129

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

KWIK-CHARGE DESIGNATION STRIPS – DOUBLE HEIGHT

X-WIDE®VERTICAL DESIGNATION STRIPS

X-Wide designation strips mount on either side (or both) of

standard 19" and 23" wide panels and do not interfere with

horizontally mounted strips. Each kit contains two mounting

brackets which easily fasten with mounting screws provided.

Marking str ips and clear plastic covers slide into place. Each

kit fits onto both sides of a jack panel.X-Wide strips are used

on the following panels:

Part No. Description For Panels

DS311 Kit (double height) includes: 2600310,

1-mounting strip (17" long) 1400315

1-cover

1-marking strip sheet

(3 strips per sheet)

4-mounting screws

DS312 Cover (used with Kit DS311) –

DS313 Marking strip sheet (used with –

Kit DS311)

DOUBLE HEIGHT DESIGNATION STRIPS

Part No. Description For Panels

TT516 Kit (double height) includes: 1600, B1600,

1-mounting strip (8.375" long) 1700, B1700

1-cover

1-marking strip sheet

(3 strips per sheet)

4-mounting screws

TT517 Marking strip sheet (used with –

Kit TT516)

TT518 Cover (used with Kit TT516) –

Kwik-Change®Designation Strip

DS311 (double height)

UNDRILLED PREDRILLED

1600, A1600, 1700 B1700, TT51 D1600, D1700, BD1700,

through TT62, 2-, 4- & 6-Wire TTD51 through TTD62, 2- 4 &

TT-Connector ized Jackfields, 2- & 6-Wire TT-Connectorized

4-Wire TTPC Connectorized Jackfields, 2 & 4-Wire TTPC

Jackfields, 1200, 1400, 1400320, Connectorized Jackfields.

2600,and 2600320.

SPECIFYING NOTES: Each kit fits both sides of a jack panel (Standard

height 1.75". Also available in 3.5 inch and 5.25 inch heights.

Prefix letter“D” indicates panels have been predrilled countersunk holes to

facilitate mounting X-Wide strips. Series 1200, 1400, & 2600 can be predr illed

on special order.

3-row Jack Panels Assembly

with DS323 X-Wide

Designation Strip installed

Assembly sequence

of DS323 X-Wide

Designation Strip

KWIK-CHANGE®DESIGNATION STRIPS (DOUBLE HEIGHT)

* Please visit the product pages on our website for the most up-to-date product information

JACK PANELS

238

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

JACK PANELS

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

ORDERING

1. Order by part number from table.

2.To order X-Wide®str ips installed on panels,

contact Switchcraft.

Part No. Description For Panels

DS321 Kit (.75 x 1.75 inches) includes: 1600, A1600

2-mounting brackets 1700, B1700

2-marking strips TT51 thu TT54,

2-covers TT59 thru TT62,

4-mounting screws, nuts and 2- & 4-Wire

lockwashers TTConnectorized

Jackfields, 2-, 4-

& 6-Wire TTPC

Conntectorized

Jackfields

DS322 Kit (.75 x 3.5 inches) includes: Same as DS321

2-mounting brackets (Mounted in

2-marking strips pairs)

2-covers

8-mounting screws, nuts and

lockwashers

DS323 Kit (.75 x 5.25 inches) includes: 6-Wire TT-

2-mounting brackets Connector ized

2-marking strips and panels for

2-covers DS321

12-mounting screws, nuts and

lockwashers

DS350 Kit (.75 x 2.265 inches) includes: B1600, C1600

2-mounting brackets

2-marking strips

2-covers

4-mounting screws, nuts and

lockwashers

DS351 Kit (.75 x 1.75 inches) includes: 2-, 4- & 6-Wire

1-marking strip Connector ized

1-cov er Jackfields , TTPC

(Used on all 1.75 inch height Connector ized

connectorized jackfields Jackfields

except next to hinge)

DS352 Kit same as DS351except Same as DS351

narrow width.To be used next

to hinge.

DS353 Kit (.75 x 5.25 inches) includes: 6-Wire TT-

1-marking strip Connector ized

1-cover Jackfields

X-WIDE VERTICAL DESIGNATION STRIPS

X-WIDE®VERTICALDESIGNATION STRIPS

DS353

DS351

X-WIDE VERTICAL DESIGNATION STRIPS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

239

PATCH CORDS & MOLDED CABLE ASSEMBLIES

FAX: 773 792-2129

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MOLDED CABLE ASSEMBLIES

WIRE AND CABLE

Switchcraft provides over 100 types of wire and cable from

which molded cable assemblies are manufactured. Basically,

30 different cables are used for standard tooling.There are no

additional charges where standard tooling exists.

Tooling is designed so cable entry openings on molded plastic

handles fit tightly to the outside diameter of the cable. The

tighter fit holds cable secure and is more resistant to abuse

than if a larger opening were used.

DESIGN AND FABRICATING TECHNIQUES

Switchcraft’s engineer ing staff is supported by a complete tool

and die making facility, as well as a fully equipped and staffed

molding department to fill all of Switchcraft’s plastic molding

requirements.

The molding department uses injection molders of

semi-automatic, multiple-cavity type to obtain high production

rates.

MANUFACTURING SEQUENCE (EXAMPLE)

Step 1: The 1-piece tip rod is firmly staked into the phone plug

finger assembly, making a complete and mechanically secure

assembly. (Refer to Figure 1) The staking process, using precision

manufactured parts, keeps the tip rod assembly from working

loose and causing mechanical and electrical problems later.

Step 2: Cable center conductor is soldered to tip rod; then the

tubular bridge slee ve is slid forward, bringing the cable shield in

contact with the circular notch around rear of tip rod assembly.

Step 3: Bridge sleev e is crimped tightly to tip rod assembly and

cable. Center conductor is completely isolated from potential

pulling strains, and shield makes a firm, low resistance

connection with plug sleeve.

Step 4: A dimensionally stable plastic handle/body of the

proper color , siz e and shape is molded into place .F eatures are

depressions for finger grip, cable entr y opening customized to

cable diameter to minimize wear on cable, and handle/body

molded in one place.

From star t to finish, Switchcraft’s molded cables are designed

and built with maximum quality and reliability.There is vir tually

no limit to the type and characteristics of special molded cables

that Switchcraft can build to special order. For all special

orders, consult Switchcraft.

Molded cable assemblies offer many advantages over

conventionally-fabr icated cables:

• Improved wiring strain relief.

• Proper match of cable diameter to handle.

• Sealed junction: Less exposed area; less contamination

due to moisture, dust, dirt.

• Lower weight and smaller size.

• 100% shielding on selected types.

• Color to match/complement equipment decor.

• Legends, color codes, r ibs, dot, customer logo/indicia

can be added.

• All molded cables are 100% tested for continuity, shor ts

and voltage breakdown (250 or 500V).

• All Switchcraft®molded assemblies are UL recognized.

OEM COST SAVINGS

Molded cable assemblies generally cost less than your

in-house conventionally-fabricated assemblies. Specific

advantages are elimination of:

1.Your evaluation, ordering, incoming inspection, and

stocking of individual parts.

2.Your plant/equipment needs for in-house fabrication.

3.Your tooling/labor costs

4.Your production line QA/QC.

MOLDED CABLE RELIABILITY

In a series of OEM-conducted tests of Switchcraft versus

non-molded, f abricated cab les, Switchcraft cab les were shown

to be superior.

1. Fabricated cab les broke at low er pull forces:OEM types – 24

to 34 pounds, molded cables – 37.5 to 41 pounds

(molded cables did not break at terminations; the cable itself

broke about one to two feet back from the connector).

2. Fabricated cab les suffered broken wires at lo w pull-out force

limits. Molded cables had cable breaks before cable pulled

out of the handle, in most instances. And this failure

occurred, as previously noted, at higher pull-out forces.

Strengthened molded cable assemblies out-performed

fabricated assemblies, and in fact, the crimp molding process

makes it stronger than the wire itself.

SPECIAL ORDER ITEMS

• Customer Iogo

• Panel Relief Bushing. Specify panel thickness and exact

point on cable where bushing is to be installed. Standard

panel opening is .50" (12.7 mm) diameter. Double

flatted in panels up to .125" (3.18 mm) thick.

• Molded Cable Clamp Bands or Y-Junctions.

(Refer to page 258.)

• Special Ter mination (see separate char t). Contact

Switchcraft for specials and provide complete details.

TYPES OF PLASTICS

Thermoplastics used for molded cable assemblies, have

excellent electrical and mechanical properties, are economical,

convenient for molding, and can be provided in an array of

colors. They have electrical characteristics far higher than

required, and provide dimensional stability, abrasion and

abuse resistance , and can be molded with a smooth mirror-lik e

finish or matte or semi-matte finishes.

DESIGN MATERIALS AND FEATURES

FIGURE 1: MOLDED CABLE MANUFACTURING STEPS

FOR 1/4" LITTEL PLUG®

1. One Pc.Tip Rod

Assembly

3. Crimped Bridg e Sleeve

2. Center Bridge

Conductor Sleeve

Termination

Cable Entry Opening - Custom

Selected to fit Cable Used

4. Complete

Body/Handle

Molded in Place

* Please visit the product pages on our website for the most up-to-date product information

PATCH CORDS & MOLDED CABLE ASSEMBLIES

240

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

3.5MM MOLDED CABLE ASSEMBLIES

3.5MM MOLDED CABLES

FEATURES AND BENEFITS

• Choose plug-to-plug or plug-to-stripped and tinned leads

• 3.5 mm plugs available as straight or r ight-angle

• Available in mono and stereo

• NOM.29 GA jacketed conductors (red and white)

with copper spiral shield

• Cable O.D. 3.0 mm nom./.118" nom.

• Black cable

ORDERING INFORMATION

1. Order by part number.

2. Contact Switchcraft for custom requirements.

PART NUMBERING SYSTEM

32 - Mono

33 - RA Mono

35 - Stereo

36 - RA Stereo

H - Black R - 3.0 mm nom.

2-conductor wire

with spiral copper

shield

Length (feet)

036 (3)

072 (6)

144 (12)

32 - Mono

33 - RA Mono

35 - Stereo

36 - RA Stereo

84 - Stripped

and tinned

90 - Straight

Cut Off

SPECIFICATIONS

PLUGS

Tip, Ring and Sleeve: Brass with nickel-plate

Flex Life: 5000 cycles minimum

Plug Insulator: ACETAL

END CODE: 35

3.5 mm STRAIGHT PLUG END CODE: 84

STRIP and TIN

END CODE: 36

3.5 mm RIGHT-ANGLE PLUG

35HRXXX35 36HRXXX36 35HRXXX84

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

241

PATCH CORDS & MOLDED CABLE ASSEMBLIES

FAX: 773 792-2129

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

POWER PLUGS AND JACKS

MOLDED CABLE ASSEMBLIES

With Power-Plug Batter y Charger Plugs and Jacks

SPECIFICATIONS

PLUG

Sleeve: Copper alloy, nickel-plated.

Pin: Silver-plated copper alloy.

Finger Insulator: Plastic.

Insulating W ashers: Rigid plastic.

Sleeve T erminal: Steel, tin-plated.

Molded Handle: Plastic.

JACK

Bushing: Brass, nickel-plated copper alloy.

Washers: Rigid plastic.

Pin, Springs, and T erminals: Plated copper alloy.

Housings: Thermoplastic.

CABLE

We will build assemblies on cable furnished by you,

.156" (3.96 mm) outside diameter, or on cable we purchase to

your specifications. Jacket must have temperature rating of

60° C minimum.Optional mold availab le for larger cab le;order

as ST760L or ST765L.

DESIGN FEATURES

• ST760, ST760L, RA760 – accepts .08" (2.03 mm)

diameter pin.

• ST765, ST765L, RA765 – accepts .099" (2.54 mm)

diameter pin.

• RA712A:

• Mates with ST765, ST765L, and RA765.

• 2 conductor.

• Mounts in .313" diameter hole in panels up to .125" thick.

• Pin outside diameter is .108" - .112" split pin.

• Automatic switchover from AC to DC.

• RA722A:

• Mates with ST760, ST760L, and RA760.

• Pin outside diameter is .086" - .090" split pin.

• Molded-in cable clamp sleeve ter minal (RA plugs only).

• For use with sockets similar to those used on portable

radios, tape recorders, television receivers and appliances

which feature AC adapters and/or battery chargers.

• Available with ter minations of another ST760, RA760

stripped and tinned ends, spade lugs, alligator clips, and

more on special order.

•Jacks available with extended bushing for use with

Switchcraft locking power plugs 761K, 766K, S761K,

and S766K on special order.

See ordering guide on next page.

ST760, ST765 – T ermination Code: 47, 48

RA760, RA765 – T ermination Code: 52, 53

NOTE: ST760 is a molded version of S760; ST765 is a molded version of 765.

RA712A and RA722A

Termination Code: 71, 72

.080-.084 DIA x .328 DEEP

ST-760 (2.03-2.13) DIA x (8.33) DEEP

.099-.103 DIA x .328 DEEP

ST-765 (2.52-2.61) DIA x (8.33) DEEP

Ask About

Our Locking

Power Plugs

.099-.103 DIA x .328 DEEP

RA-765 .(2.52-2.61) DIA x (8.33) DEEP

.080-.084 DIA x .328 DEEP

RA-760 .(2.03-2.13) DIA x (8.33) DEEP

RA722A

.086" -.090" Split Pin

Collapses to fit .08" Diameter Pin

*RA712A

.108" -.112" Split Pin

Collapses to fit .10" Diameter Pin

* Please visit the product pages on our website for the most up-to-date product information

PATCH CORDS & MOLDED CABLE ASSEMBLIES

242

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

ORDERING GUIDE

MOLDED CABLE ASSEMBLIES WITH POWER PLUGS AND JACKS

PART NUMBERING SYSTEM

TO CREATE A PART NUMBER

1. Identify Ter minations (both ends)

2. Indicate Color and Type of Cable

3. Select the Length of Assembly

DC POWER CABLE ASSEMBLIES

*See “Cable Types” chart on page 260. Note: Some configurations will be special orders. Contact Switchcraft.

STRAIGHT 2-CONDUCTOR .100 PIN POWER PLUG (#48) TO:

Termination (other end) Cable Length (feet) Part Number1

(power plug) #48 C 6 48HC07248

(stripped wires) #84 C 6 48HC07284

(blunt cut) #90 C 6 48HC07290

(power jack .100 pin) #71 K 6 48HK07271

Type Termination Color Cable* Length (feet) Termination

ST760 4 7 G-Gray C 0 1 8 (1.5) 4 7

ST765 4 8 H-Black K 0 2 4 (2) 4 8

ST760L 5 7 5 7

ST765L 5 8 5 8

ST760K 7 3 7 3

ST765K 7 4 7 4

RA760 5 2 Y 0 3 6 (3) 5 2

RA765 5 3 Z 0 4 8 (4) 5 3

RA712A 7 1 0 7 2 (6) 7 1

RA722A 7 2 1 2 0 (10) 7 2

TYPICAL STANDARD PART NUMBERS

1. All cables listed here are black.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

243

PATCH CORDS & MOLDED CABLE ASSEMBLIES

FAX: 773 792-2129

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

EN3™MOLDED CABLE ASSEMBLIES

FEATURES AND BENEFITS

• Dual pur pose handle provides flex relief and finger grip

design for easy inser tion and withdrawal.

• Available in both cord and in-line versions.

• 2 through 8 pin configurations.

• Superior leakage protection. Contact area is double-sealed

for excellent moisture and chemical resistance.

• Integral O-ring and gasket. O-ring is molded onto cord

housing assembly and gasket is molded onto panel

housing assembly to prevent leakage and eliminate

need for additional copper case o-r ings and gaskets.

• Thermoplastic r ubber body simulates closed entry contact

system to prevent probe damage or accidental loss of

spring retention due to misaligned or bent pins.

• Housing rated UL 94V-O against flammability.

• Exceeds Coast Guard specifications for water tightness

(CFR 46 Par t 110.20).

• Exceeds enclosure rating IP16/IP18 when not mated or

covered and IP66/IP68 when mated or covered (IEC 529).

• Exceeds enclosure rating 6P at 1000V when mated

or covered (NEMA 250).

APPLICATIONS

• Process Control

• Communications

• Marine Electronics

• Transportation

• Medical Instrumentation

• General Industrial Electronics

• Geothermal Instr umentation

MATERIALS

Connector shells, contact locking disk:

Thermoplastic polymer glass fiber, flame retardant

Coupling ring: Nylon

Connector shell interior: Ther moplastic r ubber

Contacts: Copper base alloy gold-plated over

nickel under plate

EN3™MINI WEATHERTIGHT OVERMOLDED CABLE ASSEMBLIES

SPECIFICATIONS

MECHANICAL

Shock: Mil-Std 202 Method 213B, condition K

Vibration: Mil-Std 202 Method 201

Life: 600 inser tion/withdrawal cycles (minimum)

ELECTRICAL

Voltage Rating (sea level): Tested at 600 VRMS

Insulation Resistance: 100 megohms (minimum) at 77° F

Contact Resistance: 5 milliohms (maximum)

Current Rating: 7.5 Amps (#20 contact);

13.0 Amps (#16 contact)

ENVIRONMENTAL

Temperature Limits: -40°C to +65°C (non-operating)

Moisture Resistance: Mil-Std 202 Method 106F

Insulation Resistance: Mil-Std 202 Method 302 condition B

Thermal Shock: Mil-Std 202 Method 107G

Salt Spray: Mil-Std 202 Method 101D condition B

RATINGS

IP16/IP18

IP66/IP68

NEMA 250 (6P)

CFR 46 Par t 110.20

UL 94V-O

Patent 5,485,673 File 36049

OVERMOLDED STYLE NUMBER

#20 CONTACT SIZE

Number of Pins 2345678

Male Cord 502 503 504 505 506 — —

Female Cord 512 513 514 515 516 517 518

Male Inline 522 523 524 525 526 527 528

Female Inline 532 533 534 535 536 — —

OVERMOLDED STYLE NUMBER

#16 CONTACT SIZE

Number of Pins 2345678

Male Cord 552 553 —————

Female Cord 562 563 —————

Male Inline 572 573 —————

Female Inline 582 583 —————

PART NUMBERING GUIDE*

Example:

1st Length 2nd

Termination Color Cable in Inches Termination

503 H A 072 184

*In most instances the multi-conductor cable will be used – found on page 252.

The over molded EN3™cable can accept nominal cable

O.D.’s up to .300.

Tooling charges may apply for customer specified cable.

Note: 9-18 versions can also be molded.Contact factory for details .

* Please visit the product pages on our website for the most up-to-date product information

PATCH CORDS & MOLDED CABLE ASSEMBLIES

244

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MOLDED CABLE ASSEMBLIES

97GVXXX06 99GVXXX04 97WVXXX06

(shown with

optional clip)

Also available

with 3.5 mm plug

finger termination.

99GD07261

99WD07284 97WDXXX61

CORDETTE®AND CORD SWITCH ASSEMBLIES

DESCRIPTION 1st Term Housing & CABLE Cable Length (In.) 2nd Term Circuitry Button Color

Example: Code Cable Color CODE X X X Code

Std. Cordette (921K) 99 G V 0 7 7 84 Std. - 1A (No Code) Std. Black (No Code)

ED903 Series 97 1 - 1B H - Black

Standard Cable G-Gray V (W1230-1) .250" PVC 18GA 06 2 - 1C R - Red

Type for 1/4" Plugs H-Black V (W1230-2) .250" PVC 18GA 07 3 - AB W - White

B-Beige V (W1230-4) .250" PVC 18GA

W-White V (W1230-5) .250" PVC 18GA

Standard Cable G-Gray D (W1032-1) .109" PVC 25GA 61

Types for Tini®and H-Black D (W1032-2) .109" PVC 25GA 50

Micro Plugs W-White D (W1032-3) .109" PVC 25GA 51

H-Black E (W1065-2) .100" PVC 26GA

FEATURES AND BENEFITS

• Momentar y, 0.5 A switching combined with

1-piece molded plastic body qualifies Cordette for all types

of commercial and industrial usage.

• Available with molded-on Cordette switch or assembled

Cord switch (ED ser ies).

• Cable features PVC outer jacket and withstands rugged use.

SPECIFICATIONS STYLE 97

Body: Series ED900

Housing: Die-cast zinc, satin nickel-plated.

Switch Body and Insert Bushing: H.H. Brass, nickel-plated.

Insulation: XXXP paper-base phenolic.

Cable Relief Bushing: Black neoprene.

Pressure Plates: Stainless steel.

Cable Relief Screws: Steel, nickel-plated.

SERIES ED900

TERMINATION CODE: 06, 07

(06 - 2 conductor not shown)

TERMINATION CODE: 51

TERMINATION

CODE: 84

TERMINATION CODE: 61 TERMINATION

CODE: 50

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

245

PATCH CORDS & MOLDED CABLE ASSEMBLIES

FAX: 773 792-2129

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

CORDETTE®SWITCHES

SPECIFICATIONS

SWITCH

Housing: White plastic (standard).

Molded Body: Gray plastic (standard) with contrasting trim

and gray pushbutton.

Contacts: Integral, copper alloy, hard gold-plated form 1-A, 0.5

A, 50 W maximum, AC, non-inductive load. Not recommended

for high voltage circuits.

Insulation: Thermoplastic UL 94V-0.

Button Color: Black (standard). Other colors available on

special order.

CABLE

Standard Unshielded—Type W-1230.

Note: See Standard Cable Chart on page 260 for details.

We will build assemblies on cable furnished by you, .27" (6.68

mm) outside diameter, or on cable we purchase to your

specifications.Jacket must have temperature of 60° C minimum.

ST900 (#99)

Button stroke only .063" (1.6 mm). Cable leads soldered

directly to s witch terminals.Standard button is with 1-A s witching.

Use termination number “99” with all cable numbering charts

except multi-pin interconnection. Use code “198” for multi-pin

interconnections.

See Switch Section of Switchcraft’ s Engineering Design Guide

for more details on the ST900.

MOLDED CABLE ASSEMBLIES

WITH CORDETTE®SWITCHES

ST900

Termination Code: 99

ST900

ST900F

Part Number Description

Cordette Switch,

921 phone jack termination

Same as 921, plus 6-foot,

921K 2 conductor cable with stripped

and tinned leads.

Ask About

Our New Sealed

Cordette®ST901

Code: 98

SPECIAL ORDER FEATURES

• 1-B, 1-C, or 1-A + 1-B switching.

• Red, green, blue, white or yellow pushbuttons.

• Legends

• Other body colors

• ST-900 - Custom-molded to any of a large selection of

cables. Also many cable terminations, i.e., phone plugs,

extension jacks, phono plugs, spade lugs, alligator clips,

stripped and tinned leads, etc.

* Please visit the product pages on our website for the most up-to-date product information

PATCH CORDS & MOLDED CABLE ASSEMBLIES

246

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MULTIPIN INTERCONNECTORS

Switchcraft DIN molded cable assemblies meet increased

demand for moder n, field-tested connections for a wide range

of electrical/electronic applications. Connectors are DIN

(Deutsche Industrie Nor m) circular type, male or female (lock-

ing or non-locking) with 3 to 8 pins/contacts. Units are molded

and protected with a rugged handle, and are fully shielded and

equipped with advance design cable relief. Switchcraft cable

assemblies and mating receptacles adhere to strict

requirements of FCC Docket 20780 and offer fully shielded

links for data and instr umentation applications of all kinds.

SHIELDING EFFECTIVENESS

Effectiveness of shielding is frequency-dependent; as

frequency increases, more shielding is required to maintain

comparable shielding effectiveness. The chart below

delineates shielding eff ectiveness with molded cab le assemblies

with 100% foil shield cables and shielded DIN connectors.

Frequency Range MHz Shielding Effectiveness, dB

30-500 -30

60-400 -20

500-800 -10

MOLDED CABLE ASSEMBLIES WITH DIN PLUGS

Style ST307

Termination Code: 307

Style ST324

Termination Code: 324

Style RA374

Termination Code: 374

Style RA356

Termination Code: 356

STYLES RA300 AND ST300

APPLICATIONS

• Computer

• Data Communications

• Instrumentation

• Medical Systems

• Process Controls

• MIDI (Musical Instrument Digital Interface)

FEATURES

• Long life

• 7 different pin configurations: versatile circuitry

• Fully molded plugs sealed against contamination

(moisture, dust, dirt)

• Fully shielded: plugs with interference

protection/ common ground-shield

• Strain relief: protects internal wire connections

• Flex relief: molded integral with handle

for extra protection. No exit stress failures

• Locking: 30° twist locking for anti-vibration

protection and ease of engagement

• Straight and coil cords: stock and custom styles,

colors, lengths

• Shielded or unshielded cables: stock and custom

styles, colors, lengths

• Molded through-panel cable relief: extra

cable protection

• Custom wiring/ keying: gives extra choice in

mounting and circuit selection

• Custom contact plating: precious and other metals

• Custom logo: your identification on molded plugs

• 100% tested for continuity, shorts, appearance,

voltage breakdown (250 or 500 V)

COMPLETE SHIELDING SYSTEMS

Switchcraft also offers shielded DIN receptacles for use with

shielded molded cable assemblies. Together they provide a

valuable design tool to suppress EMI interference to permit

you to meet strict requirements of FCC Docket 20780.

ORDERING

1. Order by par t number from guide on page 251.

2. For special order items, contact Switchcraft with details.

SPECIFYING NOTE: See Connector Section of Switchcraft’s

Engineering Design Guide for mating receptacles.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

247

PATCH CORDS & MOLDED CABLE ASSEMBLIES

FAX: 773 792-2129

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MULTIPIN INTERCONNECTIONS

Insertion/Withdrawal Forces:

Number of Insertion Force Withdrawal Force

Contacts pound/N pound/N

23.6/(16) .45–2.7/ (2–12)

35.4/(24) .67–4.1/ (3–18)

47.2/(32) .90–5.4/ (4–24)

59.0/(40) 1.24–6.8/ (5.5–30)

610.8/(48) 1.46–8.1/ (6.5–36)

712.6/(56) 1.68–9.5/ (7.5–42)

814.4/(64) 1.90–10.8/ (8.5–48)

STYLES RA300 AND ST300

SPECIFICATIONS

ELECTRICAL

Contact Resistance: Cord Plugs and Receptacles.

.010 ohms, contact spring/pin; .030 ohms, ground clip/shell.

Control and Switching Receptacles: .015 ohms,

contact spring/pin; .020 ohms, switch contacts.

Dielectric Withstanding Voltage: 500 V (rms).

Leakage Resistance: 105MΩ

MECHANICAL

Life: 5000 cycles

MOLDED CABLE ASSEMBLIES WITH DIN PLUGS (continued)

Part Numbers-Male (pins)

3@180° 4@210° 5@180° 5@240° 6@240° 7@270° 8@270°

Pin Arrangements B D F E G H N

Description

Straight handle. ST303 ST309 ST305 ST304 ST306 ST307 ST308

Straight handle. 30° twist

lock ring fastening, mates with ST323 ST329 ST325 ST324 ST326 ST327 ST328

lock flange plugs and receptacles.

Right-angle handle. RA353 RA359 RA355 RA354 RA356 RA357 RA358

Right-angle handle. 30° twist

lock ring fastening, mates with RA373 RA379 RA375 RA374 RA376 RA377 RA378

lock flange plugs and receptacles.

1. See next page for Pin/Contact arrangements.

PLUG MATERIALS

Pin Contacts: Silver-plated, copper alloy.

Insulating W asher: Thermoplastic.

Locking Plug Housing: Nickel-plated, die-cast zinc alloy.

Other Housings: Plated steel.

Molded Handle: Flexible ther moplastic. Strain relief

matte finish.

NOTE: All connectors meet DIN specifications. Din

specification numbers (except for 4-pin, 5-pin 240°)

will be furnished on request.

ORDERING

1. See table below for termination descriptions.Ter mination

code is the same number as the plug style (e.g. ter mination

code for a ST305 is 305).

2. See page 251 for order ing guide.

Part Number Color Length, inch (mm)

W-1279-2 Black Length must be specified.

W-1289-2 Black

Term. Term.

Part Number Description A B

◊305KD084184 Black coil cord. 15" (381 mm) ST305 —

retracted; 78.74" (2 m)

extended. 5 pin male with

other end stripped and tinned

on cable number W-1301-2.

◊305HJ084184 Black cable cord. 7 feet (2.13 m) ST305 —

in length. 5 pin male with

other end stripped and tinned

on cable number W-1279-2.

◊306HK042306 Black cable cord. 39.37" (1 m) ST306 ST306

in length. 6 pin male to

6 pin male on cable number

W-1289-2.

◊306HK084306 Black cable cord. 78.74" (2 m) ST306 ST306

in length. 6 pin male to

6 pin male on cable number

W-1289-2.

PART NUMBERS – MOLDED CABLE ASSEMBLIES

FOIL SHIELD CABLES – STRAIGHT

◊Special order only; contact Switchcraft.

* Please visit the product pages on our website for the most up-to-date product information

PATCH CORDS & MOLDED CABLE ASSEMBLIES

248

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MULTIPIN INTERCONNECTIONS

MOLDED CABLE ASSEMBLIES WITH DIN PLUGS (continued)

STYLES RA300 AND ST300

Pin/Contact Arrangements

STYLES ST303 TO ST309 STYLES ST323 TO ST329

STYLES RA353 TO RA359 STYLES RA373 TO RA379

DOUBLE-FLATTED

HOLE

PANEL UP TO

.125"

(3.18 mm)

THICK

EXTERNAL

CABLE RELIEF

2-PIECE PANEL

RETAINS CABLE

RELIEF

CUTAWAY VIEW OF STYLE ST303

SHIELDED

CABLE

RELIEF CRIMP

STRAIN

RELIEF RUGGED

COMPLETELY

MOLDED HANDLE

100% THROUGH-

CONNECTOR

SHIELDING

ST300

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

249

PATCH CORDS & MOLDED CABLE ASSEMBLIES

FAX: 773 792-2129

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MIDI MOLDED CABLE ASSEMBLIES

MIDI CABLES

STANDARD PRODUCT

• Silver-plated pins

• Belden Brilliance®24 awg, 4 conductor,

braid shielded cable

• Black cable

• Black handle

SPECIAL ORDER

• Gold-plated pins

• Other cable types

• Optional lengths

• Color cable

• Color handle

MIDI CABLES

FEATURES AND BENEFITS

• Molded connectors provide superior pull-out

retention and greater environmental protection

than assembled versions.

• All five pins wired active with high definition

Belden Brilliance®cable.

• Can be used with any type MIDI instrument.

SPECIFICATIONS

• Belden Brilliance®24 awg, 4 conductor,

braid shielded cable.

• Wiring conforms to MIDI specifications including the

clock/sync capabilities on pins 1 and 3.

• Molded 180 degree 5 pin DIN connectors.

• Standard color is black with other colors available

on special order.

• PVC molded handles and cable jackets.

• All molded cables are 100% tested for continuity,

shor ts and voltage breakdown.

ORDERING INFORMATION

1. Order by part number.

2. Contact Switchcraft for more information.

Part number

MD3

MD6

MD10

MD15

Length

3 foot

6 foot

10 foot

15 foot

Color

Black

Belden Brilliance®is a registered trademark of Belden Wire and Cable Company.

Standard black cable

and handle

Optional red cable

and handle

* Please visit the product pages on our website for the most up-to-date product information

PATCH CORDS & MOLDED CABLE ASSEMBLIES

250

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MULTIPIN INTERCONNECTORS

STYLE ST600

MOLDED CABLE ASSEMBLIES

WITH MINIATURE, SHIELDED, MOLDED TINI Q-G®PLUGS

Tini Q-G®miniature plugs offer 3- through 6-pin/contact

connecting with full shielding, small size, RFI-protected

termination of analog/digital circuits/equipment. Typical

applications are for EIA RS-232C and RS-449 type

connections. Plugs retain all Tini Q-G®features, including

latchlock, strain relief, flex relief, polarization and

“scoop-proof ” construction. See Connector Section for details

on features and specifications. Shielding of these plugs meets

U.S. Navy Tempest requirements with proper cable and

mating connector choice.

MOLDED CABLES WITH STRAIGHT FEMALE

Tini Q-G®PLUGS (Special Order Only)

Three- through 6-contact plugs are molded into a complete

cable assembly per customer requirements. Plug includes

latch for secure connection, “through-ground” provision, and

external cable flex relief. Plugs are molded onto shielded or

unshielded cables of .180" – .215" diameter Standard cable

color is gray; black, beige and other colors can also be

specified. In addition, UL 94V-0 rated cables can be specified.

Cable Length

Contact Arrangements (Contact View)

Styles ST603, ST604, ST605, ST626

Termination Codes: 603, 604, 605, 626

Note: Reverse gender molded male cable assembly available.

Call factory for details.

IMPORTANT SPECIFYING NOTE

◊Special 3, 4 and 5 pin/contact patterns can be tooled on special order where

production quantities warrant special handling. Contact Switchcraft with your

requirements.

Plug Mating

Style 2Description Receptacles 1

◊ST603 3-contact straight TA3M, TB3M

female plug (molded)

◊ST604 4-contact straight TA4M, TB4M

female plug (molded)

◊ST605 5-contact straight TA5M, TB5M

female plug (molded)

◊ST626 6-contact straight TA6ML, TB6M

female plug (molded)

1. See Connector Section of Switchcraft’s Engineering Design Guide

for other mating receptacles.

2.Termination code is the same as the numbers in the plug style (e.g. termination

code for a ST626 is 626). See multi-pin ordering guide on next page.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

251

PATCH CORDS & MOLDED CABLE ASSEMBLIES

FAX: 773 792-2129

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

ORDERING GUIDE

MOLDED CABLE ASSEMBLIES FOR MULTI-PIN INTERCONNECTION

PART NUMBERING SYSTEM (NOT ALL NUMBERS SHOWN)

1. Identify Ter minations (both ends)*

2. Indicate Color and Type of Cable

3. Select the Length of Assembly

Termination Color Cable1Length (feet) Termination

(examples)

303 G-Gray A 036 (3) 3 0 3

304 H-Black B 060 (5) 3 0 4

305 D-Beige C 072 (6) 3 0 5

306 D 120 (10) 3 0 6

307 E 3 0 7

308 F 3 0 8

309 --- 3 0 9

603 G 6 0 3

604 H 6 0 4

605 J 6 0 5

606 K 6 2 6

M184

--- 1 9 0

---

1. See next page for cable descriptions.

* Please refer to page 243 for EN3™weathertight connector options.

Note:

• Other cables available on special order. Contact Switchcraft.

STRAIGHT 3-pin DIN PLUG (#303) TO:

Length

Termination (other end) Cable (feet) Part Number2

(3-pin DIN) #303 A 5 303HA060303

(3-pin Tini Q-G®) #603 A 5 303HA0606033

(Strip and tin) #184 A 6 303HA072184

(Blunt cut) #190 A 6 303HA072190

2. All cables listed here are black.

3. .180" diameter.

TYPICAL PART NUMBERS

MULTI-PIN CABLE ASSEMBLIES

STANDARD MULTI-PIN CABLE ASSEMBLY

TERMINATION VS. CABLE CROSS-REFERENCE

# - Indicates any number

X - Indicates that the cable in this column and the termination in this row can

be used together in a standard par t number

1. - Other termination/cable combinations may be available or special order.

Cable

RA353 X X

RA354 X X X

RA355 X X X

RA356 X X X

RA357 X

RA358 X X

RA359 X X

RA373 X X

RA374 X X X

RA375 X X X

RA376 X X X

RA377 X

RA378 X X

RA379 X X

ST303 X X

ST304 X X X

ST305 X X X

ST306 X X X

ST307 X

ST308 X X

ST309 X X

ST323 X X

ST324 X X X

ST325 X X X

ST326 X X X

ST327 X

ST328 X X

ST329 X X

ST603 X X

ST604 X X

ST605 X X X

ST626 X X

* Please visit the product pages on our website for the most up-to-date product information

PATCH CORDS & MOLDED CABLE ASSEMBLIES

252

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

CABLE GUIDE

STANDARD MULTI-PIN INTERCONNECTION CABLES

FOR MOLDED CABLE ASSEMBLIES ON PAGES 243 THROUGH 251.

Cable Type Color Description Cable Code

W1203-2 Black 3 conductor, 22 AWG stranded, unshielded A

.18" (4.6 mm) outside diameter, UL style 2960

W1089-1 Gray 4 conductor, 22 AWG stranded, unshielded B

.18" (4.6 mm) outside diameter, UL style 2960

W1077-1 Gray 5 conductor, 22 AWG stranded, unshielded C

.20" (5.1 mm) outside diameter, UL style 2464

W1206-1 Gray 6 conductor, 22 AWG stranded, unshielded D

W1206-2 Black .20" (5.1 mm) outside diameter, UL style 2095

W1277-6 Beige 7 conductor, 22 AWG stranded, unshielded E

.20" (5.1 mm) outside diameter, UL style 2095

W1237-2 Black 8 conductor, 22 AWG stranded, unshielded F

.23" (5.8 mm) outside diameter, UL style 2464

W1291-6 Beige 3 conductor, 24 AWG stranded, foil shielded G

.18" (4.6 mm) outside diameter

W1288-2 Black 4 conductor, 24 AWG stranded, foil shielded H

.18" (4.7 mm) outside diameter

W1279-1 Gray 5 conductor, 24 AWG stranded, foil shielded

W1279-2 Black .19" (4.8 mm) outside diameter J

W1279-6 Beige

W1289-2 Black 6 conductor, 24 AWG stranded, foil shielded K

W1289-6 Beige .22" (5.5 mm) outside diameter

W1290-1 Gray 8 conductor, 24 AWG stranded, foil shielded M

W1290-6 Beige .23" (5.7 mm) outside diameter

W1284-2 Black 5 conductor, 22 AWG stranded, braid shielded Q

.23" (5.8 mm) outside diameter

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

253

PATCH CORDS & MOLDED CABLE ASSEMBLIES

FAX: 773 792-2129

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

SUBMINIATURE PLUGS AND JACKS

MOLDED CABLE ASSEMBLIES

With Micro Plug®Subminiature Phone Plugs

DESIGN FEATURES

• Thermoplastic insulation between tip and sleeve circuits.

• “Pear-shaped” one-piece tip rod.

• Cable clamp connects cable shield (or second conductor)

to plug sleeve.

SPECIFICATIONS

PLUG

Tip and Sleeve: Plated copper alloy.

Insulation: W-1032-1. Molded ther moplastic.

Sleeve T erminal: Tinned copper alloy.

Molded Handle: Plastic.

Standard Colors: Gray, white, black, brown.

Other colors available on special order.

CABLE

Standard Shielded Cable—Type W-1032-1.

NOTE: See Standard Cable Chart on page 260 for details.

Order by part number from guide on page 259.

Special Cable: We will build assemblies on cable furnished

by you, .109" (2.77 mm) diameter maximum, or on cable

we purchase to your specifications. Jacket must have

temperature rating of 60° C minimum.

RA850: Right-angle Micro-Plug®plug with plastic handle.

Short body extension.Molded to cables up to .109" (2.77 mm)

outside diameter.

ST850: Straight Micro-Plug®plug, small plastic handle, only

.47" (11.9 mm) long.

NOTE: Micro-Plug®molded cable assemblies mate with

Switchcraft Micro-Jax®TR-2A.

RA850

Termination Code: 61

ST850

Termination Code: 60

* Please visit the product pages on our website for the most up-to-date product information

PATCH CORDS & MOLDED CABLE ASSEMBLIES

254

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MINIATURE PLUGS

SPECIFICATIONS

PLUG

Tip and Sleeve: Nickel-plated copper alloy.

Cable Clamp: Tin-plated steel.

Insulation: Rigid plastic.

Molded Handle: Plastic.

Standard Colors: Gray, white, black, brown.

Other colors available on special order.

CABLE

Shielded—Type W-1000-1 (suitable for ST740 and

ST750 due to cable Outside Diameter).

Shielded—Type W-1032-1 (suitable for all types on this page).

Standard Parallel—Type W-1041-1.

NOTE: See Standard Cable Chart on page 260 for details.

Order by part number from guide on page 259.

Special Cable: We will build assemblies on cable furnished by

you, up to .160" (4.06 mm) (for ST740 and ST750); .120" (3.05

mm) (for ST700, ST710, RA700, RA710) outside diameter, or

on cable we purchase to your specifications. Jacket must have

temperature rating of 60°C minimum.

DESIGN FEATURES

• “Pear-shaped” one-piece tip rod soldered directly

to cable conductor.

• Cable clamp connects cable shield

(or second conductor) to the plug sleeve.

RA700: Right-angle Tini Plug®plug with small plastic

handle. Short body extension, recommended for slightly

recessed jacks. Molded to cables up to .109" (2.77 mm)

outside diameter.

RA710: Right-angle Tini-Plug®plug similar to RA700,

except longer body extension where equipment jack is

deeply recessed. Molded to cables up to .109" (2.77 mm)

outside diameter.

ST700: Straight Tini-Plug®plug offering the shortest and

smallest handle.

ST710: Same as ST700, except with longer handle.

ST740: Straight Tini-Plug®with larger outside diameter

handle desirable.

ST750: Straight Tini-Plug®with same diameter handle

as ST740 and longer handle for easier handling.

MOLDED CABLE ASSEMBLIES With Tini Plug®Miniature Phone Plugs

RA700

Termination Code: 50 RA710

Termination Code: 51

ST700

Termination Code: 41

ST710

Termination Code: 40

ST740

Termination Code: 46

ST750

Termination Code: 45

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

255

PATCH CORDS & MOLDED CABLE ASSEMBLIES

FAX: 773 792-2129

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

PHONO PLUGS AND JACKS

MOLDED CABLE ASSEMBLIES With Phono Plugs and Phono Extension Jacks

ST-35

Termination Code: 25

ST-40

Termination Code: 26

RA-40 (shor t handle)

Termination Code: 29

RA-41 (long handle)

Termination Code: 31

SPECIFICATIONS

PLUG

Tip (prong): Nickel-plated, copper alloy.

Sleeve Connection: Plated copper alloy.

Insulation: Rigid plastic or thermoplastic.

Molded Handle: Thermoplastic.

Standard Colors: Gray, black, brown, red, white, tan,

or blue. Other colors available on special order.

EXTENSION JAX

Tip Spring: Nickel-plated, hardened copper alloy.

Sleeve Connection: Plated steel.

Insulation: Rigid plastic.

Molded Handle (both Plug and Jack): Plastic.

Standard Colors: Gray, white, black and brown.

Other colors available on special order.

CABLES

RA35, ST35, ST40, ST60:

Standard Shielded Cable—Type W-1000-1.

Standard Parallel Cable (lamp cord)—Type W-1033-1.

RA40, RA41:

Standard Shielded Cable—Type W-1000-1 and W-1032-1.

Standard Unshielded (Parallel) Cable—Type W-1041-1.

NOTE: See Standard Cable Chart on page 260 for details.

Order by part number from guide on page 259.

Special Cable: We will build assemblies on cable furnished

by you (maximum diameter varies for types RA35, ST35,

ST40) up to .20" (5.08 mm) outside diameter for RA40 and

RA41 or on cable we purchase to your specifications. Jacket

must have a temperature rating of 60 C minimum.

◊RA35: Right-angle phono plug with body extension for

recessed jack. Cable: .188" (4.78 mm) outside diameter

maximum.Completely shielded.(Av ailable on special order only.)

ST35: Straight phono plug with “finger grip” handle. Handle

.438" (11.13 mm) outside diameter. Completely shielded.

ST40: Straight phono plug, similar to ST35, except with

longer handle.

ST60: Straight e xtension jack with “finger g rip” handle.Handle

.438" (11.13 mm) outside diameter. Completely shielded.

RA40: Compact right-angle phono plug with low profile, high

quality insulation, and short .281" (7.14 mm) molded handle

for audio and RF connections where space is at a minimum.

RA41: Same as RA40, e xcept handle is .531" (13.49 mm) long.

DESIGN FEATURES

• Can be specified with phenolic, nylon, glass-filled Teflon

or polypropylene inter nal insulators. Polypropylene is

recommended for RF connecting applications.

• Applications include stereo, PA and intercoms, audio-visual

and telecommunications, including RF connections in

2-way radio and paging systems.

◊RA-35

Termination Code: Special Order

ST-60

Termination Code: 82

* Please visit the product pages on our website for the most up-to-date product information

PATCH CORDS & MOLDED CABLE ASSEMBLIES

256

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

EXTENSION JACKS AND LITTEL PLUGS

SPECIFICATIONS

PLUG

Tip: Nickel-plated, copper alloy.

Sleeve: Plated copper alloy.

Insulation: Rigid plastic.

Internal Shield: Plated steel.

Molded Handle: Plastic.

Standard Colors: Gray, white, black and brown.

Other colors available on special order.

CABLE

FOR 2-CONDUCTOR PLUGS:

Standard Shielded Cable–Type W-1000-1.

Standard Parallel Cable (lamp cord)–Type W-1033-1.

FOR 3-CONDUCTOR PLUGS:

Standard Shielded Cable–Type W-1021-1.

NOTE: See Standard Cable Chart on page 260 for details.

Order by part number from guide on page 259.

Special Cable: We will build assemb lies on cab le furnished by

you, .188" (4.78 mm) diameter maximum, or on cable we

purchase to your specifications. Jacket must have a

temperature rating of 60°C minimum.

DESIGN FEATURES

• Molded cables with Littel-Plug phone plugs feature

one-piece tip rod assembly connecting tip directly

to the soldered connection of the cable conductor.

• Unusual dual-purpose clamp ter minal provides completely

shielded electrical connection and a cable clamp; connects

plug sleeve to cable shield or conductor.

• Right-angle phone plugs (RA202, RA203, RA207 and

RA208) molded to cables up to .188" (4.78 mm) outside

diameter. RA202, RA203, RA207 and RA208 molded to

cables with maximum outside diameter up to .260" (6.6 mm).

MOLDED CABLE ASSEMBLIES

WITH LITTEL PLUG® PHONE PLUGS

RA200: Right-angle phone plug with plastic handle. Body

extension suitable for recessed jack. Completely shielded.

RA205: Right-angle phone plug, similar to RA200, except

shor t body extension and handle for flush mounted jacks.

MOLDED CABLE ASSEMBLIES

WITH TINI-EXTENSION®JACKS

SPECIFICATIONS

Housing (or Sleeve): Nickel-plated, copper alloy.

Handle: Molded plastic.

Sleeve T erminal: Plated steel.

Tip Spring: Copper alloy.

Insulation: Rigid plastic. Larger design also has a molded

thermoplastic insert.

Standard Colors: Gray white, black, brown. Other colors

available on special order.

CABLE

Standard Shielded:Type W-1032-1.

Standard Unshielded:Type W-1041-1.

NOTE: See Standard Cable Chart on page 260 for details.

Order by part number from guide on page 259.

Special Cable: We will build assemblies on cab le furnished by

you, up to .160" (4.06 ram) outside diameter—or on cable we

purchase to your specifications. Jac ket must ha ve temperature

rating of 60° C minimum.

ST125: Straight Tini-Extension Jax jacks with same features

as ST121, on next page (shielded, 2-conductor), except with

.406" (10.31 mm) outside diameter, designed to mate with

Switchcraft Tini-Plug®plugs.

RA205

Termination Code: 13

ST125

Termination Code: 83

RA200

Termination Code: 15

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

257

PATCH CORDS & MOLDED CABLE ASSEMBLIES

FAX: 773 792-2129

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MOLDED CABLE ASSEMBLIES

WITH LITTEL PLUG®PHONE PLUGS (continued)

RA202: Right-angle phone plug with plastic handle. Body

extension suitable where jack is recessed.RA203 is similar to

RA202, except 3-conductor plug.

◊RA207, RA208: Right-angle phone plug, similar to RA202,

except short body extension. Recommended use with

panel mounted jacks. RA208 is similar to RA207, except

3-conductor plug.

◊RA217: Special right-angle phone plug, identical to RA200

(previous page); also featuring a unique hook for hanging

various types of equipment (such as pillow speakers).

Completely shielded. Available on special order only.

ST200: Straight phone plug with “finger grip” handle, but

shor t enough to fit in all equipment.

ST230: Straight 3-conductor phone plug; same features as

ST200. Completely shielded.

SPECIFICATIONS

Housing (or Sleeve): Nickel-plated, copper alloy.

Handle: Molded plastic.

Sleeve T erminal: Plated steel.

Tip and Ring Springs: Copper alloy.

Insulation: Rigid plastic. Larger design also has a molded

thermoplastic insert.

Standard Colors: Gray, white, black, brown.

Other colors available on special order.

CABLE

Standard Shielded–Type W-1000-1 (for ST121).

Type W-1021-1 (for ST131).

Standard Unshielded–Type W-1033-1 (for ST121).

NOTE: See Standard Cable Chart on page 260 for details.

Order by part number from guide on page 259.

Special Cables: We will build assemblies on cable furnished

by you, up to .260" (6.6 mm) outside diameter , or on cab les we

purchase to your specifications .Jac ket m ust hav e temperature

rating of 60° C minimum.

MOLDED CABLE ASSEMBLIES

WITH EXTENSION JAX®PHONE JACKS

ST200

Termination Code: 05

ST230

Termination Code: 10

RA202

Termination Code: 14

ST121, ST131

Termination Code: 80, 81

ST121: Straight Extension Jax®jack is a shielded 2-conductor

jack with .50" (12.7 mm) outside diameter. Cable clamp

connects shield or second conductor to cable. Mates with

.25" (6.35 mm) diameter Switchcraft 2-conductor plugs.

ST131: Straight Extension Jax jack, same as ST121, except

3-conductor. Mates with .25" (6.35 mm) diameter Switchcraft

3-conductor plugs.

RA208

Termination Code: 07

◊RA207

Termination Code: 06

EXTENSION JACKS AND LITTEL PLUGS

* Please visit the product pages on our website for the most up-to-date product information

CABLE CLAMP BANDS AND Y JUNCTIONS

PATCH CORDS & MOLDED CABLE ASSEMBLIES

258

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

CABLE CLAMP BANDS AND Y JUNCTIONS

ST91

Termination

Code: 94

ST90

Termination

Code: 93

SPECIFICATIONS

MOLDED BAND

Housing: Plastic. Inser ts can be added to our molds to

include customer’s name or trademark. Call for details.

Standard Colors: Gray, white, black, brown. Other colors

available on special order.

CABLE*

Standard Parallel Cable (lamp cord)–Type W-1033-1.

Standard Shield Cable–Type W-1072.

ST-91 DESIGN FEATURES

• For use on stereo connecting cables and on monaural

and stereo headset cables.

• Prevents fur ther separation of individual leads on

“Rip” type cordage.

• Can be used as “Y” junction when used with standard

shielded cable such as Switchcraft W-1072; or as a cable

clamp for general pur pose with Switchcraft W-1033

and W-1050.

• Special assemblies can be built to OEM needs, using

various ter minal lugs, special receptacles to phone plugs

or connectors.

MOLDED CABLE ASSEMBLIES

WITH CABLE CLAMP BANDS

MOLDED CABLE ASSEMBLIES

WITH “Y” JUNCTIONS

SPECIFICATIONS

Y JUNCTION

Housing: Molded Plastic. Inser ts can be added to our molds

to include customer’s name or trademark.

Standard Colors: Gray, white, black, brown. Other colors

available on special order.

CABLE*

Standard Shielded Cable–Type W-1000-1.

Standard Shielded Cable–Type W-1021-1.

ST-90 DESIGN FEATURES

• For use on binaural and stereophonic headphones.

• Accommodates 1- and 2-conductor shielded cables.

• Durable, strain and humidity resistant.

• Special assemblies can be built to OEM needs, using

terminal lugs, special receptacles to phone plugs or

connectors.

*NOTE: See Standard Cable Chart on page 260 for details.

Special Cable: We will build assemblies on cab le furnished by

you (maximum diameter varies for types) or on cables we

purchase to your specifications. Jac ket must ha ve temperature

rating of 60°C minimum.

Larger “Molded Y” available. Ask for ST94.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

259

PATCH CORDS & MOLDED CABLE ASSEMBLIES

FAX: 773 792-2129

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

ORDERING GUIDE

MOLDED CABLE ASSEMBLIES

PART NUMBERING SYSTEM

TO CREATE A PART NUMBER

1. Identify Ter minations (both ends)

2. Indicate Color and Type of Cable

3. Select the Length of Assembly

* See “Cable Types” chart on page 260.

Notes:

• Use any 2-number codes on previous pages for

termination number.

• Some configurations will be special orders. Contact Switchcraft.

• Some configurations may not be possible.

• Larger plug (#45) will be supplied in place of #40

when used with cable “A”.

STRAIGHT 2-CONDUCTOR PHONE PLUG (#05) TO:

Length

Termination (other end) Cable (feet) Part Number1

(phono plug) #05 A 6 05HA07205

(stripped wires) #84 A 3 05HA03684

PHONO PLUGS (#25) TO:

(phono jack) #82 A 6 25HA07282

DUAL PHONO PLUGS (#25) TO:

(dual phono jacks) #82 F 10 25HF12082

3.5mm MINIATURE PLUG (#40) TO:

(3.5 mm plug) #40 D 6 40HD07240

TYPICAL STANDARD PART NUMBERS

1. All cables listed here are black.

MOLDED CABLE ASSEMBLIES (Not all numbers shown)

Termination Color Cable* Length (feet) Termination

05 G-Gray A 0 1 8 (1.5) 0 5

15 H-Black B 0 2 4 (2) 1 5

25 D-Beige C 0 3 6 (3) 2 5

40 W-White D 0 4 8 (4) 4 0

80 E 072(6) 8 0

82 F120(10) 8 2

83 K 8 3

99 V 8 4

* Please visit the product pages on our website for the most up-to-date product information

PATCH CORDS & MOLDED CABLE ASSEMBLIES

260

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

GENERAL CABLE GUIDE

STANDARD CABLE GUIDE

FOR MOLDED CABLE ASSEMBLIES ON PAGE 253 THROUGH 259

Cable T ype Color Description Cable Code

W1000 Beige 50Ωcoax, plastic jacket over spiral shield with 22 AWG stranded center conductor ;

W1000-1 Gray .156" (3.96 mm) outside diameter. Average capacity 31 pF/feet, UL style 1354 A

W1000-2 Black

2 conductor, plastic jacket over shield with 2, 22 AWG conductor ; .20" (5.2 mm)

W1021-1 Gray outside diameter. Average capacity 20 pF/feet between conductor; 55 pF/feet between B

W1021-1 Black shorted conductor to shield; 32 pF/feet each conductor to shield, UL style 2092

W1013-1 Gray 2 conductor, plastic unshielded parallel with 2, 18 AWG stranded conductor;

W1013-2 Black .11" (2.8 mm) x .21" (5.3 mm) outside diameter, UL type SPT-1 K

W1032-1 Gray 48Ωcoax, plastic jacket over spiral shield with 25 AWG stranded center

W1032-2 Black conductor ; .11" (2.8 mm) outside diameter. Average capacity 35 pF/feet D

W1041-1 Gray 2 conductor, plastic unshielded tandem cable with 2, 24 AWG stranded

W1041-2 Black conductor ; .06" (1.5 mm) x .12" (2.9 mm) Y

W1065-2 Black 50Ωcoax, plastic jacket over braid shield with 26 AWG stranded center conductor ;

.1" (2.5 mm) outside diameter. Average capacity 30 pF/feet, RG-174 E

W1072-1 Gray 2 conductor, twin coax, plastic jacket over 2 individually shielded 25 AWG parallel

conductor. Average capacity 36 pF/feet, recommended for headset applications F

W1230-1 Gray 2 conductor,plastic unshielded with 2, 18 AWG stranded conductor;

W1230-4 Beige .25" (6.4 mm) outside diameter, UL type SVT V

W1230-5 White

W1243-2 Black 75Ωcoax, plastic jacket over shield with 27 AWG stranded center conductor;

.15" (3.8 mm) outside diameter. Average capacity 20.5 pG/feet, UL style 1354 or 1436 X

W1033-1 Gray 2 conductor, plastic unshielded parallel with 2, 20 AWG stranded conductor;

W1033-2 Black .10" (2.54 mm) x .19" (4.7 mm) outside diameter, UL style 2433 C

W1096-2 Black 2 conductor, plastic unshielded parallel with 2, 22 AWG stranded conductor;

.08" (1.9 mm) x .15" (3.8 mm) outside diameter Z

See page 251 for Cable Assembly Termination vs. Cable Cross Reference Table.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

261

PATCH CORDS & MOLDED CABLE ASSEMBLIES

FAX: 773 792-2129

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

CROSS REFERENCE GUIDE

STANDARD CABLE ASSEMBLY TERMINATION vs.

CABLE CROSS-REFERENCE

Cable

RA40 X X X 1 1 2 X X 1

RA41 X X 1112 XX1

RA200 X X 1 1 X 2 X 1 1

RA202 X X 1 2 X X 1 1

RA205 X X 1 1 X 1

RA207 X X 1 2 X X 1 1

RA700 X X X 2

RA710 X X X 2

RA712A X 1 1

RA722A X 1 1

RA760 X X X 1 1 2 XXXX

RA765 X X X 1 1 2 XXXX

RA850 X X X 2 X X

ST35 XXXX1X2 XX1

ST40 X X 1112 XX1

ST60 X X 1112 XX1

ST121 X X 1 1 2 X X X 1

ST123 X X X 2 3

ST125 X X X X 2 X X

ST131 X

ST200 X X 1 1X2XX11

ST230 X

ST700 X X X 2 X

ST710 X X X 2 X

ST740 X X 1112 XXX

ST750 X X 1112 XXX

ST760 X X 1 1 2 X X 1

ST760L X X

ST765 X X 1 1 2 X X 1

ST765L X X

ST850 3 3 X X X 2 3 3 3

ST900 X X X 1 1 1 XXXX

# - Indicates any number.

X - Indicates that the cable in this column and the termination in this row can

be used together in a standard par t number.

1 - These cable assemblies may use heat shrink tubing under overmolded

terminations.

2 - These cable assemblies have two of the same termination at one end.

Each termination is molded in a different color.

3 - These cable assemblies use a larger overmold than is pictured in the

Engineering Design Guide.

4 - Other termination/cable combinations may be available on special order.

CROSS REFERENCE GUIDE

* Please visit the product pages on our website for the most up-to-date product information

PATCH CORDS & MOLDED CABLE ASSEMBLIES

262

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

1/4"TELEPHONE PATCH CORDS AND MIL TYPE 1/4"PATCH CORDS

Series 18Q, Plug Type 482

Length Part Replacement

feet (m) Number Cord Used

0.5 (.152) 18QA18 89QA89

1(.305) 18QB18 89QB89

2(.610) 18QD18 89QD89

3(.914) 18QF18 89QF89

4(1.219) 18QH18 89QH89

6(1.829) 18QK18 89QK89

10 (3.048) 18QN18 ––

SERIES 18Q

Red handle, brass finger

SERIES 18Q:

Used in broadcasting, studio recording, sound,

and other applications where space is at a premium. Utilizes

Series 88Q 2-conductor shielded cord, with a Switchcraft 482

Littel-Plug phone plug with red handle (PJ-051) connected to

each end. Shield grounded to sleeve of both plugs, and two

leads wired tip-to-tip, ring-to-ring. Standard cord color: black.

Other lengths and colors: gray, red, green (special order).

Series 18Q provides same or greater number of circuits in a

given space than cords using “Twin-Plug” dual telephone

plugs.

Switchcraft Patch Cords are available in a variety of types to

meet requirements of communication, industrial and telephone

switchboard applications. Patch cords are constructed of high

quality bronze tinsel covered with thermoplastic insulating

material with braided shield and black thermoplastic braid

woven over the insulated conductors.

Switchcraft MIL-type Littel-Plug®and Twin-Plug®phone plugs

with brass finish are attached to these quality cords. Design

and material used in strict accordance with Specification

MIL-P-642(A).Cords hav e an identifying label on cord and hot

stamping on plug handle.

MIL TYPE 1/4" PATCH CORDS

20 Q

PLUG

3-cond.

PLUG

3-cond.

CABLE

Shielded

2-cond.

nylon-

braid

sheath

LENGTH*

D - 2'

F - 3'

H - 4'

CABLE

COLOR*

0-Black

2-Red

5-Green

6-Blue

FINGER

FINISH

N-Nickel

plated

B-Natural

brass

* Contact Switchcraft for other lengths and colors.

SERIES 20Q 3-CONDUCTOR

TELEPHONE-TYPE PATCH CORDS

1/4" diameter plug fingers, black handle, color cable

PART NUMBERING SYSTEM

1/4" TELEPHONE PATCH CORDS

Switchcraft premium 3-conductor single patch cords are

designed for rugged, noise-free performance. Nickel-plated

plugs eliminate the need for periodical cleaning which keeps

your audio signals clear. Color cords provide instant visual

identification with a choice of three lengths. All cables are fully

shielded with rugged, braided thermoplastic outer jack ets.Plug

handles are black. Audio patch cords are available with other

lengths and brass plugs, if desired. Contact Switchcraft for

specifying assistance and cable length tolerances. SERIES 20Q

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

263

PATCH CORDS & MOLDED CABLE ASSEMBLIES

FAX: 773 792-2129

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

COMBINATION AND MIL-TYPE PATCH CORDS

Series CPC Combination Patch Cords provide convenient

interconnections between standard telephone-type jacks

(3-conductor, .25" inside diameter sleeve) and miniature

telephone-type jacks (3-conductor, .173" inside diameter).

Series CPC cords are ideal for connection in telephone, data

processing and other telecommunication applications where

both standard and miniature jacks are available for patching.

FEATURES

1. Rugged, telephone-quality tinsel conductors, with slate gray,

braided thermoplastic jacket with fle x relief reinf orcements at

point of entr y into each plug handle.

2. Ser ies CPC cords, eliminates the need for a separate

adapter or field-fabr icated combination cords.

3. Switchcraft (on special order) can assemble cords of any

practical length.

◊SERIES CPC101: Standard 2-conductor, 413 Twin-Plug

(.25" outside diameter finger) on one end; miniature,

3-conductor TT253, TT Twin-Plug (.173" outside diameter

finger) on the other end. One twin plug tip to miniature plug

ring. All sleeves connected to cable shield. 6, 10, 15, 20 and

25 foot lengths.

◊SERIES CPC103: Standard 2-conductor, 413 Twin-Plug

(.25 " outside diameter finger) on one end with cable-connected

shield to sleeve; two independent tip circuits. Other end

miniature, TT261, TT Twin-Plug (.173" outside diameter finger)

in the same wiring. 6, 10, 15, 20 and 25 foot lengths.

◊SERIES CPC104: Standard 3-conductor, 414 Twin-Plug

(.25 " outside diameter finger) on one end; miniature

3-conductor, TT263, TT Twin-Plug on other end. Wired at

5-conductor tips-to-tips, rings-to-rings, all sleeves to cable

shield. 6, 10, 15, 20 and 25 foot lengths.

COMBINATION PATCH CORDS

SERIES 22Q: For use in telephone patching, broadcasting,

studio recording, high-quality public address systems,

telephone, telecommunications, and instrumentation systems.

Uses 4-conductor shielded cord with Switchcraft Number 414

Twin-Plug®connected to each end. Shield is grounded to

sleeve of each plug and individual leads wired tip-to-tip and

ring-to-ring. Twin-Plug 414 is a 6-circuit plug with electrically

independent tip circuits and ring circuits, with plug fingers

spaced on .625" center to fit standard twin jacks.

A self-aligning feature accommodates errors in jack location.

Standard lengths:1 feet to 10 f eet;standard color:black.Other

lengths and colors are available.

Part Number Length, feet (m)

◊22QB22 1 (.305)

◊22QD22 2 (.610)

◊22QF22 3 (.914)

◊22QK22 6 (1.829)

◊22QN22 10 (3.048)

MIL-TYPE 1/4" TWIN PATCH CORDS

Part

Number Length Description

◊CPC102A 6 inches

◊CPC102D 2 feet

◊CPC102F 3 feet

◊CPC102K 6 feet

◊CPC102N 10 feet

◊CPC102R 15 feet

◊CPC102T 20 feet

◊CPC102U 25 feet

Standard 3-conductor (483)

telephone plug (.25" outside

diameter finger) on one end;

miniature (253) tini-telephone®

3-conductor (.173" outside

diameter. finger) plug on

other end.(See Schematic).

◊Special order only; contact factory for price and delivery.

CPC102A

Series 22Q

◊Special order only; contact factory for price and delivery.

* Please visit the product pages on our website for the most up-to-date product information

PATCH CORDS & MOLDED CABLE ASSEMBLIES

264

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MINIATURE TT BRAIDED PATCH CORDS

CABLE AND PLUG FINGER COMBINATIONS

2-Conductor Patch Cord.Two-conductor Bantam-Type®plug,

Switchcraft TT251 at each end. Shield (75% coverage) is

grounded to each plug sleeve. Tinsel conductor is wired

tip-to-tip. Standard color: black. Other colors and lengths are

available on special order.

3-Conductor T win P atc h Cords. 5-circuit patch cords use two

3-conductor twin Bantam-Type plugs, Switchcraft TT-263, at

each end. Sleeve circuits are wired common, and tinsel

conductors are wired tip-to-tip and ring-to-ring (see schematic).

Polarizing handle notches indicated plug fingers with

interconnected tip and rings. Standard color: black. Other

colors and lengths are available on special order.

MINIATURE TT®BRAIDED PATCH CORDS

3-Conductor Patch Cord. 3-conductor Bantam-Type plug

(Switchcraft TT253) at each end.Wiring is the same as TT724,

except also has r ing-to-ring wir ing.

Part Number Description Length, feet (m)

◊TT861 0.5 (.152)

◊TT862 1 (.305)

◊TT864 2 (.61)

◊TT866 3 (.914)

◊TT867 4 (1.219)

◊TT868 5 (1.524)

◊TT869 6 (1.829)

Part Number Description1, 2 Length, feet (m)

◊TT741N0 0.5 (.152)

◊TT742N0 1 (.305)

◊TT744N0 2 (.61)

◊TT746N0 3 (.914)

◊TT747N0 4 (1.219)

1. For brass fingers, substitute “B” for “N” in par t number. Special order only.

2.“0” in par t number denotes black handle and cord. Substitute the following

for “0” to specify other color cords:

2–Red 5–Green 6–Blue

◊Special order only; contact Switchcraft for prices and delivery.

TT720

Single, 2-Conductor TT740

Single, 3-Conductor TT860

Twin, 3-Conductor

CABLE AND PLUG FINGER COMBINATIONS

Part Number Description Length, feet (m)

◊TT741 0.5 (.152)

◊TT742 1 (.305)

◊TT744 2 (.61)

◊TT746 3 (.914)

◊TT747 4 (1.219)

◊TT748 5 (1.524)

◊TT749 6 (1.829)

Part Number Description Length, feet (m)

◊TT722 1 (.305)

◊TT724 2 (.61)

◊TT726 3 (.914)

◊TT727 4 (1.219)

◊TT728 5 (1.524)

◊TT729 6 (1.829)

2-conductor single,

brass finish on plug fingers,

black handle and cord.

Identifying label on cord.

3-conductor single,

brass finish on plug fingers,

black handle and cord.

Identifying label on cord.

3-conductor single,

nickel-plated plug fingers

(brass available) black

handles and cord.

3-conductor twin,

brass finish on plug fingers,

black handle and cord.

Identifying label on cord.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

265

PATCH CORDS & MOLDED CABLE ASSEMBLIES

FAX: 773 792-2129

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MINIATURE TT MOLDED PATCH CORDS AND TELEPHONE COUPLERS

Part Numbers Length

Series TT100 Series TT120 feet (m)

◊TT101 ◊TT121 0.5 (.152)

◊TT102 ◊TT122 1.0 (.305)

◊TT103 ◊TT123 1.5 (.457)

◊TT104 ◊TT124 2.0 (.610)

◊TT105 ◊TT125 2.5 (.762)

◊TT106 ◊TT126 3.0 (.914)

◊TT107 ◊TT127 4.0 (1.219)

◊TT108 ◊TT128 5.0 (1.524)

◊TT109 ◊TT129 6.0 (1.829)

◊TT110 ◊TT130 7.0 (2.134)

◊TT111 ◊TT131 8.0 (2.438)

◊TT112 ◊TT132 9.0 (2.743)

◊TT113 ◊TT133 10.0 (3.05)

◊TT114 ◊TT134 11.0 (3.353)

◊TT115 ◊TT135 12.0 (3.658)

Part Numbers Length

Series TT140 Series TT160 feet (m)

◊TT141 ◊TT161 0.5 (.152)

◊TT142 ◊TT162 1.0 (.305)

◊TT143 ◊TT163 1.5 (.457)

◊TT144 ◊TT164 2.0 (.610)

◊TT145 ◊TT165 2.5 (.762)

◊TT146 ◊TT166 3.0 (.914)

◊TT147 ◊TT167 4.0 (1.219)

◊TT148 ◊TT168 5.0 (1.524)

◊TT149 ◊TT169 6.0 (1.829)

◊TT150 ◊TT170 7.0 (2.134)

◊TT151 ◊TT171 8.0 (2.438)

◊TT152 ◊TT172 9.0 (2.743)

◊TT153 ◊TT173 10.0 (3.05)

◊TT154 ◊TT174 11.0 (3.353)

◊TT155 ◊TT175 12.0 (3.658)

MINIATURE TT®MOLDED PATCH CORDS (continued)

TELEPHONE COUPLERS

AND ADAPTERS

TELEPHONE PATCH COUPLERS

TT-couplers interconnect 2- or 3-conductor patch cords

terminated with Switchcraft standard or tini-telephone®plugs,

also similar telephone plugs with compatible finger shape and

dimensions.

TT-REPLACEMENT CORDS

Series TT700 cords have bronze tinsel conductors covered

with thermoplastic insulation. A braided shield surrounds the

conductors, and the cord is finished with a braided black

thermoplastic jacket. Cord ends are reinforced to accept the

internal threaded end of a TT-Phone Plug®plug. Used as a

replacement cord for Series TT720 and TT740 patch cords,

and used on TT-Twin Plug®plugs, Series TT260, in dual cable

assemblies with 2- and 3-conductor (or combinations) plug

fingers requiring independent tip, ring and sleeve

circuits, and for single cable assemblies where supplementary

cross-over wiring is needed for common tip, ring and/or

sleeve circuits.

◊TT701 - Length 6" (152.4 mm).

◊TT709 - Length 6' (1.829 m).

TT140 SERIES

TT160 SERIES

Part

Number

◊TT281

◊TT282

◊TT283

◊TT284

◊TT289

361A

◊362A

Handle

Color

Black

Red

Black

Red

Metal

Cond.

Input ID

Inch (mm)

.175 (4.44)

.25 (6.35)

Output ID

Inch (mm)

.175 (4.44)

.25 (6.35)

◊Special order only; contact factory for prices and delivery.

TT120 SERIES

TT100 SERIES

* Please visit the product pages on our website for the most up-to-date product information

PATCH CORDS & MOLDED CABLE ASSEMBLIES

266

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

VIDEO PATCH CORDS

FEATURES:

* Rugged nickel-plated handles knurled for positive

finger grip.

* Flexible black "boot" placed on all cable colors for

more positive grip and cable strain relief.

* Overall flexible jacket for easy coil and low retract memory.

SPECIFICATIONS:

Plug Housing: Nickel-plated, copper alloy.

Plug Contact Pin: Gold-plated, copper alloy.

Cable: Conductor : 22 AWG (19 x 34)

Stranded BC

Shield: 95% BC Braid

Dielectric: .146", 3.70mm, Cellular

(Foam) PE

Jacket: Matte Finish PVC

Nom. Imp: 75 Ohm

VIDEO PATCH CORDS

Switchcraft new broadcast series video patch cords are

available in eight base ten color codes. Our cable is a high

performance serial digital 75 Ohm RG59 type. This unique

low-loss cable is ideal for “Tr ue” 75 Ohm HD patching as well

as conventional analog signals.

The jacket is made flexible with very low retract memory.

Colors Color Code Stock Lengths

Black = BK 2'

Red = R 3'

Orange = O 4'

Yellow = Y 5'

Green = GN 6'

Blue = BL 7'

Purple = P 8'

Gray = GY 9'

10'

Part Numbering System

Video Patch Cords Video Patch Length (Feet)

Standard .090 WECO VP

Midsize Video Patch VMP

(Custom lengths are available by request)

Midsize Video Patch

VMP

Standard .090 WECO

Video

Patch

VP VMP

Length

(Feet) Cable

Color Video

Patch Length

(Feet) Cable

Color

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

267

PATCH CORDS & MOLDED CABLE ASSEMBLIES

FAX: 773 792-2129

PATCH CORDS &

MOLDED CABLE ASSEMBLIES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

BROADCAST SERIES

3-CONDUCTOR TT PATCH CORDS:

ANALOG / AES/EBU AUDIO AND RS422 PATCHING

BROADCAST SERIES

SPECIFICATIONS

Standard plug terminations are single 3-conductor TT.

Plug handle is molded thermoplastic.

Plugs: Tip Rod, Ring and Sleeve - Copper Alloy

Cable: 26 AWG (30x40) OFBC, 110 Ohm Low

Capacitance. Jacket is Matte PVC

Colors Color Code Stock Lengths

Black = BK 2'

Red = R 3'

Orange = O 4'

Yellow = Y 5'

Green = GN 6'

Blue = BL 7'

Purple = P 8'

Gray = GY 9'

10'

Part Numbering System

Video Patch Cords Video Patch Length (Feet) Cable Color

Single Bantam TT TT

Dual Bantam TT TTD

(Custom lengths are available by request)

1 Foot (12" inches) equals 3.28 meters

Switchcraft single 3-conductor TT audio patch cords have

now been designed with a lo w capacitance cab le which at 110

Ohms is ideal for digital audio AES/EBU and SMPTE Mtime

code patching.The over all jack et is no w fle xib le in eight colors .

The nickel plated plugs allow for non-tarnishing and the

overmolded handle-boot reduces strain off the cable when

pulled.

Switchcraft dual 3-conductor TT patch cords have also been

redesigned with an overall flexible cable and six colors to

choose from. Like the single TT the dual plugs are nickel

plated and flexible. These cords work with all Switchcraft

TT stereo spaced bays for analog audio and RS422 data

patching.

TTD Not available in purple or gray.

Single Bantam TT

Dual Bantam TT

TTD

Tiny

Telephone

TT TTD

Length

(Feet) Cable

Color Tiny

Telephone

Dual

Length

(Feet) Cable

Color

* Please visit the product pages on our website for the most up-to-date product information

NOTES

268

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

269

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MINIATURE KEYBOARD SWITCHES – SERIES 9800

Momentary IBS s witches provide cost-effective v ersatility for a

wide range of electrical/electronic applications including

switching analog and digital signals in business systems,

public address, test instruments, medical, EDP (computer),

input devices and peripheral equipment, local area network,

telecommunication, digital transmission equipment, telephone

systems and attachments and calculators. Convenient

modular design allows quick assembly to PC boards. These

switches are also available in multiple station assemblies

(see page 308).

SPECIFICATIONS

MECHANICAL

Switch Actuation: Momentary

Plunger T ravel: .144" (3.66 mm).

Actuation Force (Full Travel): 12-15 ounce (340-425 grams).

Life: 1 million operations.

ELECTRICAL

UL approved at .25 A @ 28V DC and .125 A @ 125V AC

MATERIALS

Housing: Molded thermoplastic UL 94V-0

Plunger: Molded ther moplastic UL 94V-0.

Contactors: Copper alloy.

Terminals: Copper alloy, solder-plated.

Contact Surfaces: Gold-plated.

MOUNTING

Switches have .157" (4 mm) long PC terminals for mounting

on single- or double-sided PC boards up to .094" (2.4 mm)

thick on 0.394" (10 mm) minimum centers in rows or arrays.

0.394" (10 mm) PC terminals available on special order.

Rugged molded-in standoff legs provide stable mounting

and clearance for PC board cleaning.

IBS MINIATURE SWITCHES

SERIES 98000R

Part No.1

982A01R

982A03R

982A06R

Description

Momentary

Circuit

1-A

1-C

2-C

Dim. A

.157"

(4 mm)

1 Order pushbuttons separately.

ORDERING SPECIAL SWITCHES

Contact your Switchcraft representative with full

specifying details.

SPECIAL ORDER FEATURES

• Other circuitr y - 1B, 2A or 2B

• Longer terminals - .394" (10 mm) long.

IBS SWITCH CATALOG NUMBERING SYSTEM

98 X X XX D R

SERIES •

98 - 98000R

MECHANICAL FUNCTIONS •

2 - Momentar y

TERMINALS •

A - .157" (4 mm)

◊B - .394" (10 mm)

◊D - Make-Before-Break (Shor ting Contacts)

(Use with 03, 06 circuits only when required.)

• CIRCUITS

01 - 1A ◊04 - 2A

◊02 - 1B ◊05 - 2B

03 - 1C* 06 - 2C

MINIATURE KEYBOARD SWITCHES

◊Special order only; contact Switchcraft for price and delivery.

* Non-shor ting (break-before-make) contacts

ORDERING STANDARD SWITCHES

Order switches and pushbuttons by part numbers from table.

PART NUMBERS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

270

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

KEYBOARD SWITCH PUSHBUTTONS

Circuit

1-A

1-B

1-C

2-A

2-B

2-C

N.O.

N.C.

Common

N.O.

N.C.

Common

Pushbuttons designed for IBS switches are available in

white, black, red, blue, and gray. Other colors are available

on special order. Pushbutton faces are concave for operator

convenience and can be mounted either horizontally

or vertically. Pushbuttons must be ordered separately,

but may be factor y installed, if desired, at extra cost.

KEYBOARD SWITCH PUSHBUTTONS

PART NUMBERS

Type I

◊P2936

◊P2937

◊P2938

◊P2939

◊P2940

Type II

◊P2951

◊P2952

◊P2953

◊P2954

◊P2955

Color

White

Black

Red

Yellow

Green

Type I

◊P2941

◊P2942

◊P2943

–

Type I I

◊P2956

◊P2957

◊P2958

◊P2979

◊P2992

Color

Blue

Gray

Brown

Cream

Tangerine

LEGENDS

Engraved letters and numbers are available on special order.

A-Z, ON and OFF in Condensed Block typef ace are a v ailab le.

Other custom legends may be supplied (please inquire).

Refer to drawing and chart for legend data.

Character

Height

inches (mm)

Horizontal

Mount

(Char. Max.)

1/8" (3.175)

3/32" (2.381)

5/64" (1.984)

Character

Height

inches [mm}

Vertical

Mount

(Char. Max.)

1/8" (3.175)

3/32" (2.381)

5/64" (1.984)

LEGEND

AREA

LEGEND

AREA

◊Special order only; contact Switchcraft for price and delivery.

RECOMMENDED

PC BOARD LAYOUT

(.300 x .100)

(Component Side)

TYPE I TYPE II

TYPE I PUSHBUTTON TYPE II PUSHBUTTON

VERTICAL MOUNT

HORIZONTAL MOUNT

TERMINAL FUNCTION BY TERMINAL NUMBER

First Pole1Second Pole

*Pin 5 is used as a support pin for switch mounting and has no electrical

connection. 1. N.O.= normally open; N.C.= normally close.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

271

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

UNISWITCH®SWITCHES – SERIES US & LUS

UNISWITCH®SWITCHES

SERIES US - Non-illuminated,

SERIES LUS - Illuminated

Cost-effective Uniswitch switches are lighted or non-lighted

momentary switches featuring snap-in mounting in a single hole

and a choice of solder/screw (#5-40), solder/quick-connect (AMP

FASTON®110) 60967-1, or stand-off PC terminals.Molded housing

protects internal parts, and bezel functions as b uilt-in escutcheon.

Series LUS accepts T 1-3/4 bi-pin lamps. (Lamps not included.)

®FASTON is a registered trademark of AMP INC.

MOUNTING

“Snap-in” mounting is in .617" (15.67 mm) minimum square hole -

for row or matrix mounting. Panel thickness: .047" (1.19 mm) to

.266" (6.76 mm) maximum. To mount, simply press switch into

panel; “Adjusto-Clip” locking tabs engage panel and hold switch

securely. Behind panel distance is 1.312" (33.32 mm) minimum.

SPECIFICATIONS

Switch Housing: Molded plastic, charcoal gray only.

“Adjusto-Clip”: Copper alloy.

Contactor: Copper alloy plated. Form 1-A rated:

250 mA, 30 W maximum, AC, non-inductive load.

Terminals: Copper alloy, silver-plated.

Pushbuttons: Molded plastic in 8 colors.

Operating Force: 12 - 16 ounce (340-454 grams).

SPECIAL ORDER FEATURES

• Other contactor platings.

• Engraved legends (See page 270).

• Other pushbutton colors.

• “Adjusto-Clips” set to positions 2, 3, 4, or 5.

Position

Number

Panel Thickness

Inch (mm)

Min.

.047 (1.2)

.094 (2.4)

.141 (3.6)

Max.

.078 (2.0)

.125 (3.2)

.172 (4.4)

Max.

.219 (5.6)

.266 (6.8)

Position

Number

Panel Thickness

Inch (mm)

Min.

.188 (4.8)

.234 (6.0)

* “Adjusto-Clips” normally installed in this position unless otherwise specified.

* Extra replacement pushbuttons can be ordered separately.

“ADJUSTO-CLIP” MOUNTING

PART NUMBERS (Order switches and pushbuttons separately)

Part Number

P23491

P23492

P23493

P23494

Color

Red

Black

Green

Blue

Part Number

◊P23495

◊P23497

◊P23498

◊P234913

Color

White

Orange

Yellow

Amber

PUSHBUTTONS* (Pushbuttons ordered separately from switches.)

Solder/ Printed Solder/ Solder/ Printed Solder/

Screw Circuit Quick-Connect Screw Circuit Quick-Connect

US001 US001PC US001ST LUS001 LUS001PC LUS001ST

Terminal Type/Part Number;

Series US

Terminal Type/Part Number;

Series LUS1

1. Lamp not included.

◊Special order only; contact Switchcraft for price and delivery.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

272

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

UNISWITCH®SWITCHES – SERIES BXR

BOX SWITCH®SWITCHES

SERIES BXR

Economical momentary, non-illuminated switches feature

“Adjusto-Clip” snap-lock mounting and selection of switching.

Bezel trims mounting and enclosed construction protects

against dust, dirt, and physical damage. Color pushbuttons

have concave face for positive “feel”.

MOUNTING

Front mount in .620" (15.75 mm) minimum square hole.

Solder lug/quick-connect terminals accept AMP FASTON®

110 terminals; PC ter minals fit boards up to .281" (7.14 mm)

thick. “Adjusto-Clip” permits mounting in panels from .047 "

(1.19 mm) to .281" (7.14 mm) thick.

®FASTON is a registered trademark of AMP INC.

SPECIFICATIONS

Housing: Molded plastic, charcoal gray only.

Pushbutton: Molded plastic; red, black, green, and

white standard.

“Adjusto-Clip” Mounting Frame: Copper alloy, plated.

Contact Springs: Copper alloy, plated.

Contacts: Integral, copper alloy, plated.

1-A, 1-C, 2-C, or 2-A + 2-C

Switching: 250 mA, 30 W max., AC, non-inductive load.

Terminals: Copper alloy, silver-plated.

SPECIAL ORDER FEATURES

• Other contact platings.

• Engraved legends (see page 270).

• Other pushbutton colors.

• “Adjusto-Clips” set to positions 2, 3, 4, or 5.

Pushbutton Color/Part Number

Red Black Green White

Circuits

Solder Lug/Quick-Connect Terminals

BXR011

BXR013

BXR016

BXR0110

BXR021

BXR023

BXR026

◊BXR0210

◊BXR031

BXR033

BXR036

◊BXR0310

BXR051

BXR053

BXR056

◊BXR0510

1-A

1-C

2-C

2-A + 2-C

PC Terminals

◊BXR011PC

◊BXR013P

BXR016PC

◊BXR0110PC

◊BXR021PC

◊BXR023P

BXR026PC

◊BXR0210PC

◊BXR031PC

◊BXR033PC

◊BXR036PC

◊BXR0310PC

◊BXR051PC

◊BXR053PC

◊BXR056PC

BXR0510PC

1-A

1-C

2-C

2-A + 2-C

◊Special order only; contact factory for price and delivery.

.047 (1.2)

.094 (2.4)

.141 (3.6)

.188 (4.8)

.234 (6.0)

.094 (2.4)

.141 (3.6)

.188 (4.8)

.234 (6.0)

.281 (7.1)

Position

Number Minimum Maximum

Panel Thickness Inch (mm)

“ADJUSTO-CLIP” MOUNTING POSITIONS

PART NUMBERS

* “Adjusto-Clips” normally installed in this position unless otherwise specified.

BXR013PC

SCHEMATIC

PANEL

CUTOUT

RECOMMENDED

PC BOARD LAYOUT

SHOWN ACTUAL SIZE

Rear view, BXR056

Solder Lug/Quick-Connect

Terminals.

Rear view, BXR013PC

PC T erminals.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

273

SWITCHES

FAX: 773 792-2129

SWITCHES

BUTTON-SWITCH®& TINI-SWITCH®– SERIES 903, 913, 923, 933, 950, 960

TINI-SWITCH®SWITCHES

SERIES 950, 960

Momentary Tini-Switch®switches are miniaturized versions

of Littel-Switch®switches (see page 274 for construction

details). .25 A contacts are intended for low-power switching

where contact resistance is not cr itical.Red or black pushbuttons,

solder lug terminals and choice of 1-A, 1-B and 1-C switching

is standard.

MOUNTING

Switches mount from rear in .250" (6.35 mm) diameter hole in

panels up to .094" (2.39 mm) thick. Mounting washers and

locknuts are supplied.

SPECIFICATIONS

Bushing: Copper alloy, plated.

Pushbutton: Molded plastic, integral with shaft.

Insulation: Rigid plastic.

Springs: Copper alloy.

Contacts: Integral contacts are standard. .25 A, 30 W

maximum, AC, non-inductive load.

Washer: Steel, plated, S17901.

Locknut: Copper alloy, plated, P11501.

SPECIAL ORDER FEATURES

• Other pushbutton colors. • Legends.

Panel Mounting

Front

Rear

Black

913

◊913D

933

◊933D

Red

903

◊903D

923

◊923D

Schematic1

1-C

1-D

1-C

1-D

1. Circuits C or 1-D can be wired for either 1-A or 1-B switching

◊Special order only; contact Switchcraft for price and delivery.

PART NUMBERS

Pushbutton Color/Part Number

Black

961

◊962

963

Red

951

◊952

953

Circuit Schematic

1-A, SPST, (N.O.)

1-B, SPST, (N.C.)

1-C, SPDT

◊Special order only; contact Switchcraft for price and delivery.

PART NUMBERS

SERIES 903, 913, 923, 933

These small momentar y switches are completely enclosed in

rugged metal housing. Front or rear-panel mount types offer

1-A, 1-B, 1-C, or 1-D s witching.Red or blac k pushb uttons and

solder terminals are standard. Series 903 and 913 are front

mount in .469" (11.91 mm) diameter hole in panels up to

.297" (7.54 mm) thick. Ser ies 923 and 933 are rear mount in

.250" (6.35 mm) diameter hole in panels up to .156" (3.96

mm) thick. Mounting hardware is supplied.

SPECIFICATIONS

Body: Copper alloy, plated.

Pushbutton: Molded red or black plastic, integral with shaft.

Insulation: Rigid plastic.

Springs: Integral contacts, plated.

Ratings: 250 mA, 30 W maximum, AC, non-inductive load.

Solder T erminals: Copper alloy, silver-plated.

Locknuts: Copper alloy, plated.

Series 903, 913: P-1053-1.

Series 923, 933: P-1150-1.

Lockwasher: Series 903, 913: Steel, P-1060-3

Flat W asher: Series 923, 933: Steel, plated, S-1790-1

SPECIAL ORDER FEATURES

• Other pushbutton colors. • Legends.

.453

(11.5)

BUTTON-SWITCH®SWITCHES

Series 903 & 913 Series 923 & 933 Series 950 & 960

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

Pushbutton Color/Part Number Circuit

903 923

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

274

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LITTEL-SWITCH SWITCH WS SERIES 100, 100S, 200, 200S

LITTEL-SWITCH®SWITCHES

SERIES 100, 100S, 200, 200S

Momentary switches feature leaf springs, insulating spacers,

notched insulating washers and plated copper alloy bushing

assembled into a rugged, reliable, long-life switch for limited

space applications. Series 100 and 200 have integral .25 A

contacts intended for low power switching where contact

resistance is not critical. Series 100S and 200S have 3 A

fine silver contact. Red and black pushbuttons, solder lug

terminals and choice of 1-A, 1-B or 1-C switching are

standard. Shaft and pushbutton molded as one piece.

Captive shaft extends through bushing, actuated leaf

springs. Notched phenolic washers insulate springs and

interlock all members, eliminating possibility of springs

shifting. All springs are insulated from bushing.

MOUNTING

Switches mount from rear in panels up to .250" (6.35 mm)

thick in .375" (9.52 mm) diameter holes. Locknuts and

washers are supplied.

SPECIFICATIONS

Bushing: Copper alloy, plated.

Pushbutton: Molded plastic, integral with shaft.

Insulation: Rigid plastic.

Springs: Copper alloy.

Contacts: Integral contacts are standard. (Series 100, 200)

.250 A, 30 W maximum, AC, non-inductive load. Riveted

silver contacts (Series 100S, 200S); 3A, 300 W maximum

AC, non-inductive load.

Washer: Steel, plated, S10221.

Locknut: Copper alloy, plated, P10001.

SPECIAL ORDER FEATURES

• Other pushbutton colors.

• Legends.

• Welded crossbar palladium contacts for dry circuit.

LEGENDS

Switchcraft offers a wide variety of engraved legends on

special order. Contact Switchcraft for details.

Pushbutton Color/Part Number

Black

201

◊201S

202

◊202S

203

◊203S

Red

101

◊101S

◊102

◊102S

103

◊103S

Circuit Schematic

1-A, SPST, (N.O.)

1-B, SPST, (N.C.)

1-C, SPDT

◊Special order only; contact Switchcraft for price and delivery.

“S” at the end of part number indicates 3H rated fine silver contacts.

PART NUMBERS

SPST (NO) 1-A SPST (NC) 1-B SPDT 1-C

101 102 103

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

275

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

Hi-D SWITCH SWITCHES - SERIES H-100, H-100PC, H-200, H-200PC

Enclosed momentary pushbutton switch. Designed to meet

switching requirements of computers, data processors,

ground suppor t systems, machine and process controls, test

equipment and intercoms. Anodized aluminum body protects

switch contacts from dir t, dust and bending dur ing mounting.

Terminals accept AMP Series 53 taper pins. Mount in .375"

(9.5 mm) hole on .531" (13.5mm) centers. Behind panel

depth .938" (23.8mm) minimum.

SPECIFICATIONS

Housing: Aluminum, black anodized.

Button: Thermoplastic, black.

Terminal Base: Thermoset black phenolic.

Terminals: Copper alloy, gold-plated.

Contacts: Integral. 500 mA, 5 W maximum,

non-inductive load.

Contactor: Copper alloy, plated.

Hardware: Supplied with one, ◊P1970 aluminum,

black anodized knurled mounting nut, and one,

P1971 parkerized lockwasher.

HI-D SWITCH®PC MOUNT SWITCHES

SERIES H-100, H-100PC, H-200, H-200PC

Compact, momentary switches mount on .625" (15.87 mm)

centers in rows or matrix arrays and are the same height and

panel size as Switchcraft’s Hi-D Jack. Rugged “box” body

protects contact springs against mechanical damage and

keys them in precise alignment. Precision springs produce

high contact pressure, smoother wear-reducing actuation,

and positive “make-break”. Recommended where contact

resistance is not critical.

MOUNTING

Rear of panel mount in .375" (15.87 mm) diameter hole in

panels up to .156" (3.96 mm) thick. Behind panel space:

1.094" (27.79 mm) minimum. Mounting hardware supplied.

Switches with PC terminals mount directly to PC boards,

and may also be panel mounted with threaded bushing.

SPECIFICATIONS

Switch Housing: Molded plastic.

Mounting Bushing: Copper alloy, plated.

Pushbutton/Actuator: Thermoplastic, red or black with

concave face.

Contact Springs: Copper alloy, silver or gold-plated.

Contacts: Integral, 1-A, 1-B, 1-C, or 1-D, 0. 25 A, 30 W

maximum, non-inductive load.

Contactor: Copper alloy, plated.

Locknut: Copper alloy, plated. P10001 (supplied).

Washer: Steel, nickel-plated. S10221 (supplied).

SPECIAL ORDER FEATURES

• Other pushbutton colors.

• Legends (see page 270).

Solder Lug Terminals

Pushbutton Color/Part Number

PC Terminals

Pushbutton Color/Part Number

Red Black Red Black

Circuit Schematic

H101

◊H102

H103

◊H103D

H201

◊H202

H203

◊H203D

◊H101PC

◊H102PC

H103PC

◊H201PC

◊H202PC

H203PC

1-A

1-B

1-C

1-D

See Below

◊Special order only; contact factory for price and delivery.

PART NUMBERS

DA-SWITCH SWITCHES

SERIES DA

Button Color

Red

Black

Green

Blue

White

Yellow

Series DA

◊DA013

◊DA023

◊DA033

◊DA043

◊DA053

◊DA083

Schematic

Circuit

A-B

◊Special order only; contact Switchcraft for price and delivery.

PART NUMBERS

A-B contacts may be externally wired to

provide a 1-C circuit as illustrated below.

SERIES H100, H200

Series

H-100PC

H-200PC

Series H-100, H-200

COMPONENT SIDE

SHOWN

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

276

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

CORD-SWITCH AND CORDETTE CORD SERIES SWITCHES

CORD-SWITCH®CORD SWITCHES

SERIES E900, ED900, EP900

Momentary cord (pendant) s witches can be specified with red

or black pushbuttons, 1-C or 1-D switching, solder terminals

and metal handle (Series E900), plastic handle (Series

EP900), or metal handle with clamp and strain relief (Series

ED900).

SPECIFICATIONS

(See page 273 for switch specs.)

SERIES E900, EP900:

Housing: Series E900 - Copper alloy, plated.

Series EP900 - Molded black plastic.

Switch Bushing: Copper alloy, plated.

Insulation: Rigid plastic.

SERIES ED900:

Housing: Die-cast zinc, plated.

Switch Body and Insert Bushing: Copper alloy, plated.

Insulation: Rigid plastic.

Cable Relief Bushing: Black thermoplastic r ubber.

Pressure Plates: Stainless steel.

Cable Relief Screws: Steel, plated.

SPECIAL ORDER FEATURES

• Other pushbutton colors. • Custom legends

SERIES 921

Momentary, 0.5 A switching combined with 1-piece molded plastic

body qualifies Cordette f or all types of commercial and industrial

usage.The 921 has a phono jack receptacle and a phono jack

in handle to fit standard phono plugs.The 921K is molded with

6' (1.8 meter), 2-conductor cable (internal cable clamp).

SPECIFICATIONS

Body: 921 and 921K - Molded gray plastic with contrasting

trim and gray pushbutton.

Switch Contacts: Integral copper alloy, plated, form

1-A, 0.5 A, 50 W maximum, AC, non-inductive load.

Not recommended for high voltage circuits.

Insulation: Thermoplastic UL 94V-0.

Phono Jack Terminations: (921): Standard phono jack,

similar to 3501FP (see Jacks and Plugs Section).

SPECIAL ORDER FEATURES

• 1-B, 1-C, or 1-A + 1-B switching.

• Red, green, blue, white or yellow pushbuttons.

• Legends (see page 270).

• Other body colors.

• ST-900 - Custom-molded to any of a large selection of

cables (See Molded Cable Assembly Section). Also many

cable terminations, i.e., phone plugs, extension jacks,

phono plugs, spade lugs , alligator clips, stripped and tinned

leads, etc.

Black

E913

ED913

EP913

◊E913D

◊ED913D

◊EP913D

.375" [9.5 mm]

.250" [6.4 mm]

.375" [9.5 mm]

.250" [6.4 mm]

Red

E903

ED903

EP903

◊E903D

◊ED903D

◊EP903D

Circuit

1-C

1-D

◊Special order only; contact Switchcraft for price and delivery.

Part Number Description

921 Cordette switch, phono jack termination.

921K Same as 921, except with 6' (1.8 meter), 2-conductor

cable with stripped and tinned leads.

PART NUMBERS

2.125" LONG

(53.98mm)

3" LONG (76.20mm)

E903

Series 921

HOUSING

DIA. .687"

(17.5mm)

SERIES ED900

Pushbutton

Color/Part Number Maximum Cable

Outside Diameter

PART NUMBERS (examples)

CORDETTE®CORD SWITCHES

®®

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

SERIES 921

* Please visit the product pages on our website for the most up-to-date product information

Part Number Housing/

Pushbutton Color Switching AC Ratings (max.)

non-inductive Contacts CIrcuits Terminals

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

277

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

PUSH-LITE®SWITCHES AND INDICATORS

MOMENTARY

PL103205

PL106205

PL112205

◊PL126205

◊PL403205

◊PL406205

◊PL412205

◊PL706205

◊PL712205

Black/White

Gray/White

Black/White

SPDT

DPDT

4PDT

DPDT

SPDT

DPDT

4PDT

DPDT

4PDT

2 A, 125 V

8 A, 125V

2 A, 125V

2 A, 125 V

Palladium

Silver

Palladium

1-C

2-C

4-C

2-C

1-C

2-C

4-C

2-C

4-C

Solder Lug

SINGLE LAMP

PL203205

PL206205

PL212205

◊PL226205

◊PL503205

◊PL506205

◊PL512205

◊PL803205

◊PL806205

◊PL812205

Black/White

Gray/White

Black/White

SPDT

DPDT

4PDT

DPDT

SPDT

DPDT

4PDT

SPDT

DPDT

4PDT

2 A, 125 V

8 A, 125V

2 A, 125V

2 A, 125 V

Palladium

Silver

Palladium

1-C

2-C

4-C

2-C

1-C

2-C

4-C

1-C

2-C

4-C

Solder Lug

TWIN LAMP

PUSH-LOCK/PUSH-RELEASE

Part Number Housing/

Pushbutton Color Switching AC Ratings (max.)

non-inductive Contacts Circuits Terminals

PL103705

PL106705

PL112705

◊PL123705

◊PL126705

◊PL403705

◊PL406705

◊PL412705

◊PL703705

◊PL706705

◊PL712705

Black/White

Gray/White

Black/White

SPDT

DPDT

4PDT

SPDT

DPDT

SPDT

DPDT

4PDT

SPDT

DPDT

4PDT

2 A, 125 V

8 A, 125V

2 A, 125V

2 A, 125 V

Palladium

Silver

Palladium

1-C

2-C

4-C

1-C

2-C

1-C

2-C

4-C

1-C

2-C

4-C

Solder Lug

SINGLE LAMP

◊PL203705

PL206705

PL212705

◊PL226705

◊PL506705

◊PL512705

◊PL803705

◊PL806705

◊PL812705

Black/White

Gray/White

Black/White

SPDT

DPDT

4PDT

DPDT

4PDT

SPDT

DPDT

4PDT

2 A, 125 V

8 A, 125V

2 A, 125V

2 A, 125 V

Palladium

Silver

Palladium

1-C

2-C

4-C

2-C

4-C

1-C

2-C

4-C

Solder Lug

TWIN LAMP

WITHOUT BARRIERS

WITH BARRIERS

◊Special order only; contact Switchcraft for price and delivery.

Completely enclosed, lighted pushbutton switches feature

long-life, highly-reliable, leaf-springs. Available with or

without barriers, full or split-face display. Mounts with

clamp-type brac ket;no screws, washers or n uts needed.Can

be mounted in vertical or horizontal rows and in matrixes.

Accepts standard T 1-3/4 flange-base lamp (lamp not

furnished with switch) in either 6 V to 28 V rating. Specify

1lamp for single lamp type or 2 lamps for twin-lamp type

when redundant or split-face lighting is required. Barriers

and colored filter snap-inserts optional (order separately).

Mounting hole (w/o barriers): 1" (25.4 mm) x .875" (22.23

mm); (w/barriers) 1.188" (30.16 mm) x .875" (22.23 mm).

Panel thickness: .125" (3.18 mm) maximum. Behind panel

depth 1.75" (44.45 mm) (minus panel thickness).

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

278

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

PUSH-LITE SWITCHES AND INDICATORS

PUSH-LITE®SWITCHES AND INDICATORS (continued)

SERIES PL9000 - PL®INDICATORS

U.L. LISTED, MOMENTARY & PUSH-LOCK/PUSH-RELEASE

Part

Number Housing/

Pushbutton Action1Switching AC Ratings (max.)

non-inductive Contacts Circuit Listing Terminals

◊26U1003

◊26U1004

◊26U1007

◊26U1008

Black/White

PL/PR

SPDT

DPDT

SPDT

DPDT

8 A, 125 V

8 A, 125V

8 A, 125 V

Silver

1-C

2-C

1-C

2-C

Solder Lug

SINGLE LAMP

◊26U1005

◊26U1006

◊26U1009

◊26U1010

Black/White

PL/PR

SPDT

DPDT

SPDT

DPDT

8 A, 125 V

8 A, 125V

8 A, 125 V

Silver

1-C

2-C

1-C

2-C

Solder Lug

TWIN LAMP

◊Special order only; contact Switchcraft for price and delivery. NOTE: 1 M = Momentar y; PL/PR = Push-Lock/Push-Release

Create unlimited combinations of rows and/or matrix arrays

with or without Push-Lite switches. A perfect match for front

panel appearance Push-Lite switches - but functions only as

a lighted indicator. Mounts same as Push-Lite switches:

behind panel depth 1.341" (35.55mm) maximum uses

same lamp, color filter, snap inserts, light divider and

optional mounting barriers as Push-Lite®switches.

COLOR FILTER SNAP-INSERTS

Translucent plastic filters for special color coding in Push-Lite

switch and PL Indicators. Use with white or clear pushbuttons.

LIGHT DIVIDER

Light divider for Push-Lite switch pushbuttons and PL Indicator

screens;separates lighting from twin lamps.Order light divider f or

each switch or indicator specified where split-face lighting is

desired. Order PL551.

PUSHBUTTON/INDICATOR SCREENS

Series PL500 Pushbuttons/Indicator Screens are available

separately f or use with Push-Lite switches or PL Indicators f or

in-the-field substitution and/or replacement.

Part Number

PL9105

◊PL9205

Description

Black housing;

uses 1 or 2 lamps.

White screen.

Same as PL-9105

except gray housing.

Part Number

PL508

PL512

PL513

Color

Yellow

Clear

Amber

Part Number

PL501

PL503

PL504

PL505

Color

Red

Green

Blue

White

OPTIONAL MOUNTING BARRIERS

Molded plastic barriers separate Push-Lite switches, PL

Indicators, or combinations of Push-Lite switches and PL

Indicators and prevent accidental operation of adjacent

switches. Series PL100: end barrier. Series PL200: center

barrier. Two required between adjacently mounted switches.

Push-Lite switch is shown with two PL102 end barriers

installed.

Part Number

PL303

PL305

PL308

Color

Green

White

Yellow

SERIES PL300 - Full Display Color Filters

The above are strictly electr ical schematics and do not necessarily indicate

relative solder lug positions.

BASIC SCHEMATIC

Switch circuitry can be descr ibed as combinations of basic schematic circuits

as shown below. N.O. means nor mally open; N.C. means normally closed.

Part Number

PL102

◊PL111

PL202

◊PL211

Description

End barrier, black

End barrier, gray

Center barrier, black

Center barrier, gray

◊Special order only; contact Switchcraft for price and delivery.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

279

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

PUSH-LITE SWITCHES PART NUMBERING SYSTEM

PUSH-LITE®SWITCHES - PART NUMBERING SYSTEM

SERIES

PL LAMP & SWITCH

HOUSING COLOR

1 - Single lamp,

Black housing

2 - Twin lamp,

Black housing

3 - Non-illuminated,

Black housing

4 - Single lamp,

Gray housing

5 - Twin lamp,

Gray housing

6 - Non-illuminated,

Gray housing

7 - Single lamp,

Black housing

(PC terminals)

8 - Twin lamp,

Black housing

(PC terminals)

CIRCUITRY

03 - 1C

06 - 2C

09 - 3C

12 - 4C

23 - 1C (8A)

26 - 2C (8A)

29 - 3C (8A)

32 - 4C (8A)

ACTION

2 - Momentar y

7 - Push-Lock/

Push-

Release

9 - Momentar y

Silent*

PUSHBUTTON

COLOR

01 - Red

03 - Green

04 - Blue

05 - White

08 - Yellow

12 - Clear

13 - Amber

P L

OPTIONS

Pushbutton/indicator screens, color filter snap-inser ts, mounting

barriers and lighted dividers can be specified separately for sub-

stitution/replacement; order from tables. Also, engraving of leg-

ends is available; contact Switchcraft.

* Special order only. Contact Switchcraft.

RECOMMENDED PC BOARD LAYOUT

(Component Side)

SCHEMATIC

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

280

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

PUSH-LITE SWITCHES – OUTLINE DIMENSIONS

PUSH-LITE®SWITCHES AND INDICATORS (continued)

OUTLINE DIMENSIONS

PUSH-LITE SWITCHES WITH SOLDER LUGS

PUSH-LITE SWITCHES WITH PC TERMINALS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

281

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

PUSH-LITE SWITCHES – OUTLINE DIMENSIONS

PUSH-LITE®SWITCHES AND INDICATORS (continued)

OUTLINE DIMENSIONS

SWITCH AND INDICATOR MOUNTING WITH BARRIERS (See Note)

NOTE: PANEL OPENINGS FORM MULTIPLE ROW SWITCH MOUNTING

Leave .109" (2.77 mm) minimum width strip between panel-cutouts to assure secure mechanical

mounting of adjacent clamp mounting brackets.

SWITCH AND INDICATOR MOUNTING WITH BARRIERS (SEE NOTE)

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

282

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

SLIDE SWITCHES

DESIGN FEATURES

Switchcraft slide switches are completely field tested and

prov en in electrical/electronic equipment applications.They are

among the highest-quality, lowest-cost slide switches available

to “cost-to-quality ratio” conscious engineers.

Precision slide s witches are designed and constructed to meet

or exceed industry standards for reliability, electrical capacity

and life characteristics.

Switchcraft’s slide action switches are ideal for use in critical

military and industrial applications such as: instrumentation,

test and ground support equipment, computers, control

de vices .Their attractive styling will enhance the appear ance of

modern home entertainment equipment.

SPECIAL ORDER SWITCHES FOR

CSA APPLICATIONS

The following series of switches (solder lug type) must be

assembled with a fishpaper or phenolic solder guard to be

CSA cer tified and stamped. Available on special order only.

Series 46000R, 47000R, 46313R, 49000L, 50000L, Solder

guards are not required on these switch series with PC

terminals. Howev er, they can only be supplied with CSA stamp

on special order. Solder guards are not required on

UL only versions. Contact Switchcraft for details.

SLIDE SWITCHES

Series

46000

47000

49000

50000

56200, C56200

56300, C56300

C63000

EPS1, EPS2

EPS3, EPS4

Name

General Purpose Slide Switches

Tandem Slide Switches

General Purpose Slide Switches

“Tini-Slide” Slide Switches

Miniature Slide Switches

European Line Voltage

Selector Switches

Number of

Positions

2, 3

2; 2 gang

Series

46000E

46000R

47000E

47000R

49000

50000

56000, C56000

62000, C62000

C63000

EPS1, EPS2

EPS3, EPS4

Description

Note 1

Notes 1, 3

Note 1

Notes 1, 3

Note 1

Notes 1, 3

See page 288

See page 290

See page 291

NOTES:

1. PC terminal “A” dimension is:

Standard - .078" (1.98)

Special - .109" (2.77), .141" (3.58), .160" (4.06), .180" (4.57), .203" (5.16),

.234" (5.94), .266" (6.76), .313" (7.95), .391" (9.93), .400" (10.16),

.438" (11.12), .484" (12.29), .609" (15.47), .688" (17.48), .719" (18.26),

.813" (20.65), .969" (24.61), 1.25" (31.75)

2. .078" (1.98) “A” dimension is not recommended for momentary switches

unless clearance hole for retur n spring is provided in PC board.

3. Accepts up to #14 AWG wire.

TERMINALS

Silver-plated terminals are standard; gold-plated ter minals are

available on special order. Printed circuit terminals in varying

lengths from (“A” dimension) .078" (1.98 mm) to 1.25" (31.75

mm) are available on special order. Reference “A” on all switch

drawings indicates length of PC terminals. See

illustration and notes below for selection of terminals.

UL AND CSA SWITCHES

All slide switches in this catalog with part number suffix “E”

are stamped with both UL and CSA marks. Other standard

switches are UL recognized (except as noted) and are

stamped with the mark.

SWITCH SERIES IDENTIFICATION

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

283

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

SLIDE SWITCHES

SWITCHING

“Double-wipe” slide switches incorporate special “Sliders” to

assure wiping action of terminals. This exclusive double

wiping action reduces the possibility of oxidation or increased

contact resistance.These longer lasting, self-cleaning sliders

provide a switch with greater dependability.

The “Sliders”, which are formed with precision dies, are

U-shaped to give bifurcated contact reliability. “Sliders” are

made from a special copper alloy, plated, which assures

unifor m tensile strength over the entire life of the switch.

Switch terminals are copper alloy, plated. Plating completely

encloses the contact area in a silver jacket for positive and

continuous electrical operation. A tarnish preventive lubricant

coating is applied to the sliders and terminals.

NOTE: “double-wipe” action on all switches except

Series 62000 and 46256LFR.

PART NUMBER SUFFIX LETTERS

Series

46000E

46000R

46300R

47000

49000

50000

56200

56300

62000 (2)

C63000

EPS (3)

(1)

◊

*(1)

◊

Flush

.063 (1.6)

.087 (2.21)

.094 (2.39)

.100 (2.54)

.112 (2.84)

.125 (3.18)

.137 (3.48)

.15 (3.81)

.156 (3.96)

.187 (4.75)

.188 (4.78)

.200 (5.08)

.203 (5.16)

.219 (5.56)

.250 (6.35)

.302 (7.67)

.313 (7.95)

.315 (8)

.328 (8.33)

.344 (8.74)

.375 (9.52)

.406 (10.31)

.440 (11.18)

.453 (11.51)

.469 (11.91)

.487 (12.37)

.500 (12.7)

.531 (13.49)

.563 (14.3)

.594 (15.09)

.719 (18.26)

.750 (19.05)

Description

Special pushbutton type. Depressing (rather than

sliding) pushbutton operates the switch.

Tandem switch with 2 knobs; knobs are internally

(mechanically) coupled.

3-position switch having internal dust shield.

Molded terminal board.

Flush actuator. Screwdriver slotted. All series except

47000 series marked standard as “115/230.” Other

markings available as special order. Call

Switchcraft for details.

Locking action.

Momentary (non-lock) action.

Switch has external plunger.

Current ratings up to 3A, 125V AC. Phenolic

terminal board.

Shor ting type contacts, make-before-break.

3-position switches only. One side of neutral has

locking action; the other side has momentary action.

◊

◊ ◊

◊

(2)

◊

* Standard, ◊Special order

1. Flush screwdriver actuator is standard on numbers 46206LFE, 46206LFR, 46256LFE, 46256LFR and 47227LFR.

2. Numbers 62206L and C62206L have side knob actuator (rather than top knob) standard.

3. EPS switches not available with raised knobs.

DESIGN FEATURES (continued)

KNOBS KNOB HEIGHTS Inches (mm)

SLIDE SWITCHES (continued)

BASIC SCHEMATIC CHART

Standard arrangement is “Break”before “Make”(non-shorting).

“Make” before “Break” (shor ting) is available on special order

in Series 46000R, 47000R, 49000 and 50000.

BASIC SCHEMATIC CHART

Letter

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

284

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

GENERAL PURPOSE SLIDE SWITCHES – SERIES 46000 - 2 POSITION

SERIES 46200E, 46200R - 2 POSITION

SPECIFICATIONS

Contact Ratings: 0.5A DC and 3A AC, 125V non-inductive.(Also

1.5A, 250V non-inductive for Series 46000E only). Numbers

46206LFR and 46256LFR are not designed to switch more than

125V, and must be set to desired position before power is applied

to equipment, appliance, etc.

Listings: UL recognized and CSA certified. Ser ies 46000R

switches are CSA mar ked on special order only. Ref. UL

card E40668 and CSA File 28260.

Housing: Steel, plated.

Knob: Black thermoplastic.

Terminals and Slider Contacts: Copper alloy, plated.

Insulation: Series 46000E: Ther moplastic.

Series 46000R: Rigid plastic.

Temperature Rang e: -4°F to +158°F (-20°C to +70°C).

Dielectric Strength: 1 kV r ms @ sea level.

Insulation Resistance: 1 k MΩminimum.

SPECIAL ORDER FEATURES

1. .344" (8.74 mm) high knobs are standard; other heights

available. See char t on page 283.

2. #6-32 and #4-40 tapped flanges for mounting available

(except 46204MBR and 46206MP).

3. P.C. terminals.

4. Plunger length on 46206MP - Other lengths from

.125" (3.18 mm) to 1.844" (46.84 mm) long.

5. Series 46000R switches are CSA marked on special

order only. See page 282.

46206LE 46206LR 46206MP

46256LFE 46206LFR

46206LR 46206LFR

GENERAL PURPOSE SLIDE SWITCHES

Series

46200E

◊46201ME

◊46202LE

◊46202ME

46203LE

◊46203LSE

◊46203ME

46204LE

◊46204ME

46206LE

46206LFE

◊46206LSE

◊46206ME

46256LFE

Series

46200R

46201MR

46202LR

◊46202MR

46203LR

◊46203LSR

46203MR

◊46204LR

◊46204MR

46206LR

46206LFR

◊46206LSR

◊46206MR

◊46206MP

46256LFR

◊C46203LR**

◊C46204MR**

C46206LR**

C46206LFR**

Description

SPST NO, Momentary

SPST, Locking

SPST NC, Momentary

SPDT, Locking

SPDT, Momentary

DPST, Locking

DPST NO, Momentary

DPDT, Locking

DPDT, Locking (1)

DPDT, Locking

DPDT, Momentary

DPDT, Momentary*

DPDT, Locking (1) (2)

SPDT , Locking

DPST NO, Momentary

DPDT, Locking

DPDT, Locking (1)

Schematic*

III

III Shorting

III

2-I

2-III

2-III Shorting

2-III

III

2-I

2-III

* Contacts are non-shor ting, except as noted.

** "C" prefix specifies .078 inch (1.98) PC terminals, no mounting ears.

(1) Recommended for power selection, 115-230 legend, screwdriver slotted

actuator minimizes tampering.

(2) Shor ting bars installed.

◊Special order only; contact Switchcraft

PART NUMBERS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

285

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

GENERAL PURPOSE SLIDE SWITCHES – SERIES 46000 - 3 POSITION

SERIES 46300R - 3-POSITION

Three-position switches offer locking-locking, momentary-

momentary and locking-momentary action for talk-listen

applications. All switches have positive center detent and

shutter type dust cover to prevent dirt and dust from

contaminating switch contacts.

SPECIFICATIONS

Contact Ratings: 0.5A DC and 3A AC, 125V non-inductive.

Listings: UL recognized, card E40688 CSA certified

(marked) switches available on special order only.

See page 282.

Housing: Steel, plated.

Detent Spring: Music wire.

Shim: Black vulcanized fiber.

Knob: Black thermoplastic.

Terminals & Slider Contacts: Copper alloy, silver-plated.

Insulation: Phenolic.

Temperature Rang e: -4°F to +158°F (-20°C to +70°C).

Dielectric Strength: 1 kV r ms @ sea level.

Insulation Resistance: 1 k MΩminimum.

SPECIAL ORDER FEATURES:

1. .344" (8.74 mm) high knobs are standard; other heights

available. See chart on page 283.

2. Ser ies 46000R switches are CSA marked on special

order only. See page 282.

SOLDER GUARDS

Insulating Solder Guards, P-2370 (2-position); and ◊P-2633

(3-position); slip over solder lug terminals and prevent solder

splashes from entering interior (contact area) of s witch.Made

of fishpaper .01" (.25 mm) thick, Solder Guard slips over

terminals quickly and easily. Precision punched slots lock

onto terminals, and rectangular shape conforms with

dimension of switch terminal board. Minimizes costly

production line rewor k.

Solder Guards can be used on:

• General Purpose, Series 46000R

• Tandem, Ser ies 47000R.

GENERAL PURPOSE SLIDE SWITCHES (continued)

Part**

Number

46311LDR

◊46311MDR

◊46311TDR

46313LDR

46313MDR

46313TDR

Circuitry

SPTT

DPTT

Center

Schematic

2-VI

PART NUMBERS

Action Positions*

◊Special order only; contact Switchcraft for price and delivery.

* L - Locking; M - Momentary.

** "C" prefix specifies .078" (1.98) PC terminals, no mounting ears.

Series 46300R

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

286

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

GENERAL PURPOSE SLIDE SWITCHES – TANDEM SERIES 4700

SERIES 47200E, 47200R - 2 POSITION

Space saving, two-gang slide switches are contained in one

housing. Switching is locking type with non-shorting contacts.

SPECIAL ORDER FEATURES

1. .344" (8.74 mm) high knobs or flush knobs are standard,

depending on switch selected; other heights available.

See char t on page 283.

2. Ser ies 47000R switches are CSA marked on special

order only. See page 282.

SPECIFICATIONS

Contact Ratings: 0.5A DC and 3A AC, 125V non-inductive,

(Also 1.5A, 250V non-inductive for Series 47000E only.)

47227LFR switches are not designed to switch more

than 125V, and must be set to desired position before

power is applied to equipment or appliance.

Listings: UL recognized, card E40668, and CSA certified

(card 28260). Series 47000R switches are CSA certified

on special order only. See page 282.

Housing: Steel, plated.

Knob: Black thermoplastic.

Terminals and Slider Contacts: Copper alloy, silver-plated.

Insulation: Series 47000E - Ther moplastic.

Series 47000R - Rigid plastic.

Temperature Rang e: -4°F to +158°F (-20°C to +70°C).

Dielectric Strength: 1 kV r ms @ sea level.

Insulation Resistance: 1 k MΩminimum.

GENERAL PURPOSE SWITCHES - TANDEM

Series

47200E

◊47202LE

◊47203LE

◊47204LE

◊47204LCE

◊47206LE

◊47206LCE

Series

47200R

◊47202LR

◊47203LR

◊47204LR

◊47204LCR

◊47206LR

◊47206LCR

◊47215LR

◊47215LCR

◊47217LR

◊47217LCR

◊47221LR

◊47221LCR

◊47227LFE

◊47227LFR

Description

SPST - SPST

SPDT - SPDT

DPST - DPST

DPDT - DPDT

SPST - SPDT

SPST - DPST

SPDT - DPST

DPDT - DPDT

Schematic

II II

III III

2-I 2-I

2-III 2-III

II III

II 2-II

III 2-II

2-V

NOTE: Series 47200E and 47200R - All switches have two independent

knobs, except:

•47204LE, 47204LCR, 47206LCE and 47206LCR have one knob and

one flush actuator.

•47227LFE and 47227LFR have inter nal mechanical coupling and

two flush, slotted screwdriver actuators.

◊Special order only; contact Switchcraft

PART NUMBERS

47206LCE 47227LFR

47206LCE 47206LR

47227LFR

47206LR

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

287

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

GENERAL PURPOSE SLIDE SWITCHES –SERIES 49000 AND 50000

SERIES 49300 - 3 POSITION

Large, heavy duty, three and four pole slide switches. Standard

mounting clearance is .141" (3.58 mm). Series 49300L,

non-shor ting contacts; Ser ies 49300LS, shor ting contacts.

SPECIFICATIONS

Contact Ratings: 0.5A DC and 3A AC, 125V non-inductive.

Listings: UL recognized (card E40668); CSA certified

(marked) switches available on special order only.

See page 282.

Housing: Steel, plated.

Detent Shim: Copper alloy.

Knob: Black thermosetting plastic.

Terminals and Slider Contacts: Copper alloy, silver-plated.

Insulation: Rigid plastic.

Temperature Rang e: -4°F to +158°F (-20°C to +70°C).

Dielectric Strength: 1 kV r ms @ sea level.

Insulation Resistance: 1 k MΩminimum.

SPECIAL ORDER FEATURES

1. .5" (12.7 mm) high knobs are standard; other heights

available. See char t on page 283.

2. #4-40 extr uded and tapped mounting holes available.

3. Ser ies 49300L switches are CSA marked on special

order only. See page 282.

SERIES 50200 - 2 POSITION

A larger 2 position “double wipe” slide switch offering three

and four poles of switching and locking or momentary action.

Series 50200L and M, non-shorting; Series 50200LS and

MS, with shorting contacts.

SPECIFICATIONS

Contact Ratings: 0.5A DC and 3A AC, 125V non-inductive.

Listings: UL recognized (card E40668); CSA certified (card

28260). Series 50200L switches are CSA marked on special

order only. See page 282.

Housing: Steel, plated.

Detent Shim: Copper alloy.

Knob: Black thermosetting plastic.

Terminals and Slider Contacts: Copper alloy, plated.

Insulation: Rigid plastic.

Temperature Rang e: -4°F to +158°F (-20°C to +70°C).

Dielectric Strength: 1 kV r ms @ sea level.

Insulation Resistance: 1 k MΩminimum.

SPECIAL ORDER FEATURES

1. .344" (8.74 mm) high knobs are standard; other heights

available. See char t on page 283.

2. 50212LF available with flush, screwdriver slotted

actuator and has 4 PDT locking action.

3. Extruded and tapped 4-40 or 6-32 holes available.

4. Ser ies 50200L switches are CSA marked on special

order only. See page 282.

GENERAL PURPOSE SLIDE SWITCHES (continued)

Part

Number

◊49309L

◊49309LS

◊49329L

◊49329LS

◊49312L

◊49312LS

◊49331L

◊49331LS

UL & CSA

Listing

Yes

Description

3-PDT, Locking*

3-PTT, Locking

4-PDT, Locking*

4-PTT, Locking

Schematic

3-VII

3-VI

4-VII

4-VI

* 3rd position is off.

◊Special order only; contact Switchcraft.

PART NUMBERS

Part

Number

◊50207L

◊50207M

◊50208L

50209L

◊50209LS

◊50209M

◊50209MS

50212L

◊50212LS

Description

3PST - Locking

3PST, N.O. Momentary

4PST, Locking

3PDT, Locking

3PDT, Momentary

4PDT, Locking

Schematic

3-I

4-I

3-III

3-II

4-III

◊Special order only; contact Switchcraft.

PART NUMBERS

49331L

50209L

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

288

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MINIATURE SLIDE SWITCHES – SERIES 56200 AND C56200

SERIES 56200, C56200 - 2 POSITION

“Tini-Slide” slide switches have Exclusive SNAP SLIDE lifting

and wiping action. This unique, positive action combines the

best features of “snap” and “slide” movements into the design

of a superior switch. Pitting, burning and contamination are

minimized. Contacts lift through an air gap, drop on stationary

contacts, and slide, wiping themselves clean. Subminiature

size is ideal where useable space is at a premium.

SPECIFICATIONS

Contact Ratings: 0.5A, 125V AC or DC, non-inductive.

Minimum life at rated load 6000 cycles. Resistance after

6000 cycles at rated load is 50 milliohms maximum.

Terminals: PC Type - silver-plated. Each terminal has

standoff shoulder for stable mounting and space for board

clearance.

Mounting: Flange, (56206L1 and 56206L2) - .1" (2.54 mm)

holes for screw or mounting rivet. PC - Direct mounting to PC

boards up to .093" (2.36 mm) thick.

Knob: Molded thermoplastic (UL 94V-1).

Terminal Board: Molded ther moplastic (UL 94V-0).

Terminals: Copper alloy, silver-plated.

Contact Sliders: Copper alloy.

Temperature Rang e: -4°F to +158°F (-20°C to +70°C).

Dielectric Strength: 1 kV r ms @ sea level.

Insulation Resistance: 1 k MΩminimum.

SPECIAL ORDER FEATURES

1. .2" (5.08 mm) high knobs are standard; other heights

available on special order. See page 283.

2. Red and white knobs available.

3. Mounting flanges with .1" (2.54 mm) diameter holes on

C56206L1 or C56206L2. Flange holes tapped #4-40 on

56206L1 or 56206L2 (where production quantities warrant).

4. UL stamped on special order.

MINIATURE SLIDE SWITCHES

Part

Number

56206L1

56206L2

C56206L1

C56206L2

Dimension "B"

Inch (mm)

.573 (14.55)

.352 (8.94)

Description

DPDT, Locking

Schematic

2-III

PART NUMBERS

56206L1

SPECIAL ORDER

C56206L1 & 2

RECOMMENDED PC BOARD

LAYOUT (Component Side)

56206L156206L2

C56206L2 C56206L2

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

289

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MINIATURE SLIDE SWITCHES – SERIES 56300 AND C56300

SERIES 56300,C56300 - 3 POSITION

Series 56300 “Tini-Slide” switches provide ultra-reliable

3-position switching. They afford maximum space savings in

military, industrial and consumer applications, such as

instrumentation, test and ground support equipment,

appliances, computers, and control devices.

SPECIFICATIONS

Contact Ratings: 0.5A, 125V AC or DC, non-inductive.

Minimum switch life is 6000 cycles. Resistance after

6000 cycles at rated load is 50 milliohms maximum.

Terminals: Solder Lugs - 56313L1 with wrap around notch;

56313L2 with solder lug. PC - .585" (14.68 mm) “B”

dimension and .364" (9.24 mm) “B” dimension.

Mounting: Mounting ears for mounting to chassis of panels

with screws or rivets (not supplied). Switches with PC

terminals have stand-off shoulders for solid PC mount.

Knob: Molded thermoplastic (UL 94HB).

Terminal Board: Molded ther moplastic (UL 94V-0).

Terminals: Copper alloy, silver-plated.

Contact Sliders: Copper alloy.

Temperature Rang e: -4°F to +158°F (-20°C to +70°C).

Dielectric Strength: 1 kV r ms @ sea level.

Insulation Resistance: 1 k MΩminimum.

SPECIAL ORDER FEATURES

1. .187" (4.75 mm) high knob is standard; Other heights

available on special order. See page 283.

2. Red and white knobs available.

3.Two mounting variations:

a.Tapped #4-40 holes on mounting ears for machine

screws.

b. Mounting ears with .1" (2.54 mm) diameter holes on

switches with PC ter minals.

MINIATURE SLIDE SWITCHES (continued)

Part

Number

56313L1

56313L2

C56313L1

C56313L2

Dimension “B”

Inch (mm)

.585(14.85)

.364 (9.24)

Description

DPTT, Locking

Schematic

2-VI

PART NUMBERS

56313L1 56313L2

56313L1 & L2

RECOMMENDED PC BOARD

LAYOUT (Component Side)

56313L1 56313L2 C56313L1 C56313L2

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

290

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MINIATURE SLIDE SWITCHES

SERIES 62200 - 2 POSITION

2-position locking action with side knob actuator. Side

knob provides low profile, saving space on PC boards.

SPECIFICATIONS

Contact Ratings: 0.5A, 125V AC or DC.

PC T erminals: Copper alloy, silver plated.

Housing: Steel, plated.

Knob: Molded thermoplastic.

Terminal Board: Rigid plastic.

Sliders: Copper alloy, plated.

Dielectric Strength: 1000 V rms.

Insulation Resistance: 1 k MΩminimum.

SPECIAL ORDER FEATURES

1.Var ious knob heights available on special order.

2.Var ious lengths available on special order.

SERIES C63200 - 2 POSITION, 4 POLE

C63200 switches designed for applications, such as:

instrumentation, test and ground support equipment, computers,

data communications and medical equipment.PC mounting on

standard industr y .100" (2.54 mm) x .200" (5.08 mm) centers.

Mounts on PC boards up to .093" (2.36 mm) thick. Molded

black thermoplastic knobs. Terminals are copper alloy, gold-

plated on contact area, tinned on terminal end.

SIDE-SLIDE®/MINIATURE SLIDE SWITCHES

Part

Number

◊62206L

C62206L

Description

DPDT, with mounting ears, Locking

DPDT, without mounting ears, Locking

Schematic

2-III

◊Special order only; contact Switchcraft.

Part Number

C63212L

Action

Locking

Ratings

300mA

max.

30V AC

Switching

4PDT

Terminals

Copper alloy,

gold-plated

on contact

area, tinned

on terminal

end

Schematic

4-III

PART NUMBERS

62206L RECOMMENDED PC BOARD

LAYOUT (Component Side)

RECOMMENDED

PC BOARD LAYOUT

(Component Side)

MINIATURE SLIDE SWITCHES

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

291

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

EUROPEAN LINE VOLTAGE SELECTOR SWITCHES

SERIES EPS1, EPS2, EPS3, EPS4 - 2 POSITION

European Power Selector Switches are designed for quick,

easy programming/selection of 115V-230V primary power.

These switches provide OEM designers with an excellent

selection of PC and solder lug terminals and ratings up to

10A, 125V A C rating f or electrical/electronic equipment and

systems headed for the INTERNATIONAL mar ketplace.

HOUSING AND ACTUATOR

Switches have positive, double detents for “sure” locking

into position. Screwdriver slot actuator virtually eliminates

the possibility of accidental operation and minimizes

tampering. Molded-in legends are: 115-230V. Terminals

are staked into housing.

SPECIFICATIONS

Contact Ratings: EPS1, EPS2 - 2A, 250V AC and 4A,

125V AC. EPS3, EPS4 - UL and CSA - 10.1A, 125V; 5A,

250V. VDE - 10A, 250V.

Listings: UL and CSA recognized, UL card E40668;

CSAcard 28260. 2A, 250V AC is VDE listed, VDE #13707

(for European applications). Designed to conform to

requirements of CEE (International Commission on Rules

for the Approval of Electrical Equipment, Publication 24)

and the IEC (International Electrotechnical Commission).

Housing: Molded black glass-reinforced plastic.

Actuator and Cover: Molded thermoplastic.

Terminals: Copper alloy, silver-plated.

Slider Contacts: EPS1, EPS2 - Bi-Metal, silver on copper

alloy. EPS3, EPS4 - Copper alloy with silver cadmium

oxide inlay.

Temperature Rang e: -4°F to +158°F (-20°C to +70°C).

Dielectric Strength: 2kV r ms @ sea level.

Insulation Resistance: 1 k MΩminimum.

SPECIAL ORDER FEATURES

Series EPS actuators having legends other than

115V and 230V are available on special order.

NOTE: Contact Switchcraft for details.

EUROPEAN LINE VOLTAGE SELECTOR SWITCHES

Part

Number

◊EPS1PC1

◊EPS1PC2

EPS1PC3

EPS1SL1

Dimension “B”

Inch (mm)

.681 (17.297)

.719 (18.263)

Terminals

Straight PC

Right-Angle PC

Solder Lugs

Schematic

2-III

PART NUMBERS

Series EPS1

Part

Number

EPS2PC1

EPS2PC2

EPS2PC3

Dimension “B”

Inch (mm)

.730 (18.542)

.768 (19.507)

Description

Straight PC

Right-Angle PC

Schematic

2-III

Series EPS2

Part

Number

EPS3PC1

EPS3PC2

EPS3PC3

EPS3SL1

Dimension “B”

Inch (mm)

.681 (17.297)

.719 (18.263)

Terminals

Straight PC

Right-Angle PC

Solder Lugs

Schematic

2-III

Series EPS3

Part

Number

EPS4PC1

EPS4PC2

EPS4PC3

Dimension “B”

Inch (mm)

.730 (18.542)

.768 (19.507)

Description

Straight PC

Right-Angle PC

Schematic

2-III

Series EPS4

EPS1PC3 EPS2PC2 EPS3SL1 EPS4PC3

RED ACTUATOR RED ACTUATOR

◊Special order only; contact Switchcraft.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

292

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

EUROPEAN LINE VOLTAGE SELECTOR SWITCHES

EUROPEAN LINE VOLTAGE SELECTOR SWITCHES (continued)

EUROPEAN

LINE V OLT A GE

SELECTOR

SWITCH

PC MOUNT

EPS2PC3 - Long, right-angle

PC terminals for combined PC

terminating and mounting.

EPS1PC3 - Long, right-angle PC

terminals and flanges for com-

bined mounting to PC board

and panel/chassis.

EPS2PC2 - Long, PC terminals for

direct mounting to PC board only.

EPS1PC1 - Short, PC terminals and

flanges for combined mounting to

PC board and panel/chassis.

EPS1SL1 - Solder lug

terminals and mounting flanges

for panel/chassis mount.

PANEL/CHASSIS

MOUNT

EPS1PC3

EPS1PC1 & PC2

EPS1SL1

EPS2PC1 & PC2

EPS2PC3

PANEL OPENING DATA

SERIES EPS1

SERIES EPS2

RECOMMENDED PC

BOARD LAYOUT

(Component Side)

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

293

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

EUROPEAN LINE VOLTAGE SELECTOR SWITCHES

EUROPEAN LINE VOLTAGE SELECTOR SWITCHES (continued)

EPS3PC1 & EPS3PC2

EPS4PC1 & EPS4PC2

RECOMMENDED PC

BOARD LAYOUT

(Component Side)

PANEL OPENING DATA

SERIES EPS4

EPS4PC3

SERIES EPS3

EPS3SL1

EPS3PC3

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

294

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LEVER SWITCHES – DESIGN FEATURES

DESIGN FEATURES

High quality, field-proven Switchcr aft®lev er switches are available

in a wide selection of illuminated and non-illuminated versions,

2- and 3-position, locking and non-locking functions can be

provided. Switchcraft illuminated lever switches feature choice of

colors, wide selection of switching circuits, single lamp

illumination and ease of mounting and lamp replacement.

All switches utilize nickel silver springs without “form” at point

of fle xing to insure long spring life . The springs are assembled

into a conventional stack assembly, insulated from each other

by phenolic spacers with plastic tubing press-fit through each

stack, insuring correct alignment of contacts and providing

high insulation resistance.

APPLICATIONS

Various front panel switching applications on computers,

telecommunications systems, industrial control equipment,

intercoms, ground support systems, medical electronics,

scientific instruments, broadcast consoles and test

instrumentation.

CONTACTS

Below are listed the basic contacts available on switches in

this catalog:

1. Fine silver contacts rated at 2A, 200W (maximum)

AC non-inductive load.

2.Welded cross bar silver contacts rated at 3A,

300W (maximum) AC non-inductive load.

3.Welded cross bar palladium contacts rated at 2A,

200W (maximum) AC non-inductive load.

4.Welded cross bar gold alloy contacts rated at up to 1A,

100W (maximum) AC non-inductive load.

(Dr y circuit applications.)

BASIC CONTACT FORMS

Below are the basic contact forms available standard on all

Switchcraft Lever Switches. Specify circuits needed by

referring to the letter identification and respective location on

frame. See dimensional drawings for stack switch location.

To avoid ordering special switches it is possible to use a larger

standard circuit, providing the circuit fulfills your requirements.

Circuit F orm K is widely used in talk-listen (intercom) function

applications. In normal position (neutral), switch does not

contact upper or lower contact spring. During typical

operation, lever is held in upper (momentary) position while

speaking. Releasing lever allows switch to retur n to neutral.

For listening, lever is moved to down (locking) position. Lever

is manually returned to neutral when finished.

ORDERING STANDARD SWITCHES

Order lever switches by part number from pages 295

through 298.

LAMP DATA

Lever-Lite®switches use T-1 3/4 flange base lamps which

are available from commercial sources.

ORDERING SPECIAL SWITCHES

Lever Switches

Should you desire a special version of any Switchcraft®lever

switch not shown here, we require the following information:

1. Switch series.

2. Number of positions.

3. Mechanical action (locking, non-locking, etc.).

4. Contact configuration for each position.

5.Type of contact mater ial.

6. Color sequence (Lever-Lite III).

UL RECOGNIZED LEVER SWITCHES

Se ven series of Switchcraft le v er s witches are UL recogniz ed.

These switches are available on special order to fulfill your

switching requirements which specifically require UL listed

switching devices.

1. Series 12000

2. Series 41000

NOTE: Refer to switch series in this catalog for full mechanical

specifications and additional standard and special features.

LEVER SWITCHES

SCHEMATIC

DIAGRAM

FORM K

AB C D EF

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

295

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LEVER-LITE®ILLUMINATED LEVER SWITCHES – SERIES 84000

LEVER-LITE®III

SERIES 84000 - ILLUMINATED LEVER SWITCHES

Lever-Lite®III illuminated lever switches are designed for

front-of-panel mounting, relamping, terminating, color

changes and remov al. A minimum of time is required to install

singly, in rows, or in matrix arrays to meet a wide variety of

switching applications.2- and 3-position types are av ailab le in

non-locking functions .Mounts on .875" (22.22 mm) horizontal

centers or 1.5" (38.1 mm) vertical centers. Talk-listen

(intercom) function is also available. Illumination technique

provides a different color for each lever position.

LAMPS

Standard T 1-3/4" midget flange-base lamps (not supplied)

are available in voltages up to 28V.

SPECIAL ORDER FEATURES

1.Talk-Listen (Intercom) function.

2.Welded cross bar gold alloy for dr y circuit and silver

contacts are available. See page 294.

ILLUMINATION

A single internal lamp provides brilliant lever lighting in any

color required. Standard factory installed color filters are

provided as follows: Series 84000, Multi-Color Illumination

2-position - Amber (neutral position); green (down position).

3-position - Red (up position);amber (neutral position); green

(down position). One-color (all positions) and non-illuminated

switches can be specified on special order. Switchcraft will

install filters for non-standard illumination requirements at

nominal cost on special order.

LEVER SWITCHES (continued)

MOUNTING

RELAMPING/REPLACING

COLOR FILTERS

Grasp fingernail slots on opposite sides

of escutcheon and snap out.Next, grasp

le ver and pull lev er assemb ly free.Insert

switch into panel hole.

Lever-Lite III switches are designed for simplified lamp installation and replacement,

and color filter changes or custom installation in the field or on the OEM production

line. Lamps and filters may be changed at any time with ease and without

dismounting switch from panel or disturbing wir ing.

Remove escutcheon and lever

assembly. (see “MOUNTING” above)

For relamping, pull lamp out of

retainer with finger-tip. Replace lamp.

For color filters, use fingernails or

small screwdriver to remove. Gently

lift (don’t pr y) up under edge of

filter until it “pops” out.

Place new filter in position and press

until it “snaps” in. Replace lever

assembly and escutcheon.

(see “MOUNTING” above)

Turn two inter nal screws clockwise with

screwdriver to securely mount switch

to panel.

Replace lever assembly and “snap”

escutcheon into place. Installation

complete!

LEVER-LITE®ILLUMINATED LEVER SWITCHES – SERIES 84000

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

296

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LEVER-LITE®ILLUMINATED LEVER SWITCHES – SERIES 84000

LEVER-LITE®III SERIES 84000 - ILLUMINATED

LEVER SWITCHES

SPECIFYING LEVER-LITE®III SWITCHES

1. Basic Switch - Refer to Par t Number table for ordering

switches. For special switches, such as talk-listen

(intercom) function, special circuit for ms, or

non-illuminated switches, contact factor y for price

and delivery.

2. Illumination - Supplied with standard color filters installed.

Switchcraft will install other combinations at nominal

extra cost.

3. Lamps - Lamps are not supplied with switches.

SPECIFICATIONS

Mounting/Retaining Clips and Covers: Steel, plated.

Contact Ratings: Welded cross bar palladium contacts

rated at 1A, 200W maximum AC non-inductive load are

standard. Other contacts available. See “SPECIAL

ORDER FEATURES” on page 295.

Springs: Copper alloy, plated.

Lamp T erminals: Copper alloy, plated.

Lamp Socket: Zinc, plated.

Terminals: Copper alloy, plated, straight solder lugs.

Housing, Escutcheon, Knob, Actuator and

Switching Stacks Insulation: Molded plastic.

Temperature Rang e: -22°F to 158°F (-30°C to +70°C).

Dielectric Strength: 1 kV DC.

Leakage Resistance: 1,000 MΩor greater.

K-131 COLOR FILTER KIT

Kit is available for changing or replacing color filters to meet

illumination requirements. Each kit contains 3 filters of each

color : Amber, Blue, Green, Red, White and Yellow.

SWITCHCRAFT PART NUMBER K-131

REPLACEMENT LEVERS

Number G6083 (for locking lever)

Number G6084 (for non-locking lever)

LEVER SWITCHES (continued)

Non-Locking

◊84206

◊84212

Locking

84206L

◊84212L

Switching

2-C

4-C

PART NUMBERS

TWO POSITION

Part Numbers

◊84306

◊84312

◊84324

84306L

84312L

84324L

Position 1

1-C

2-C

4-C

Position 2

1-C

2-C

4-C

THREE POSITION

LEVER-LITE® SERIES 84000

PANEL OPENING

.750" (19.05mm)

x 1.375" (34.92mm)

◊Special order only; contact Switchcraft.

Part Numbers

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

297

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LEV-R SWITCHES – SERIES 12000

INTERCOM SWITCHES

Part Number

◊12033T

◊12037T

Stack Height "X" &"Y"

.719 (18.26)

.875 (22.22)

Switching

1-K

2-K

* Add prefix “R” to part number if non-tur n mounting is required. (Special order).

+Add suffix “L” to par t number if locking type is required.

◊Special order only; contact Switchcraft.

PANEL OPENING

.469" (11.91mm) DIAMETER

MAXIMUM PANEL THICKNESS

.094" (2.39mm)

LEVER SWITCHES (CONTINUED)

12014

12011

12010

12015

12013

12016

12012

12017

Part Number

◊12001

◊12002

◊12003

◊12003D

◊12004

◊12005

◊12006

◊12006D

Stack Hgt. “X”

&“Y” (max.)

.719 (18.26)

.688 (17.48)

.750 (19.05)

.813 (20.65)

.906 (23.01)

.875 (22.22)

1.000 (25.40)

1.063 (27.00)

Switching

1-A

1-B

1-C

1-D

2-A

2-B

2-C

2-D

Part Number

◊12010

◊12011

◊12012

◊12013

◊12014

◊12015

◊12016

◊12017

◊12033

◊12034

◊12035

◊12036

◊12036D

◊12037

Stack Hgt. “X” &

“Y” (max.)

.703 (17.86)

.766 (19.46)

.703 (17.86)

1.078 (27.49)

.703 (17.86)

.719 (18.26)

.813 (20.65)

.750 (19.05)

.875 (22.22)

1.000 (25.40)

.875 (22.22)

Switching

Pos.1 Pos. 2

1-B 1-B

1-B 1-C

1-B 1-B

2-B 2-B

1-B 1-B

1-K

1-A 1-A

1-B 1-B

1-C 1-C

1-D 1-D

2-K

THREE POSITION NON-LOCKING*

PART NUMBERS

TWO POSITION NON-LOCKING*+

LEV-R®®SWITCH SERIES 12000

Electrical

Contact Ratings: Fine silver contacts rated at 3A, 300W

maximum AC non-inductive load standard. Other

contacts available

Leakage Resistance: 1,000 MΩor greater

Dielectric Strength: 250 VDC

Material

Frame: Copper alloy, plated (3,000, 13,000); Steel,

plated (12,000)

Bushing and Shaft: Copper alloy, plated

Springs: Copper alloy

Knob: Black molded thermoplastic

Mounting Hard ware: Knurled copper alloy locknut

T10711, supplied. P10531 hex locknut, special order

Insulation: Rigid plastic spacers with plastic tubing

through stack. Rigid plastic and/or thermoplastic lifters.

Thermoplastic cam on actuator end

Knobs

T12742 Black

T12745 White T127410 Ivory

P2912 Amber

Knobs must be ordered separately.

12000 SERIES RA LEV-R SWITCHES

12000 SERIES STRAIGHT LEV-R SWITCHES

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

298

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LT SWITCH – SERIES 4100

LT®SWITCH

SPECIFICATIONS

Frame: Steel, plated.

Bushing and Actuator: Copper alloy, plated.

Springs: Copper alloy.

Contact Ratings: Welded cross bar palladium contacts

rated at 2A, 200W maximum, AC non-inductive load are

standard. See “SPECIAL ORDER FEATURES”.

Terminals: Tin dipped solder lugs.

Mounting Hardware: Supplied with one copper alloy-plated

hex locknut (P10531); and one non-tur n washer (P10639).

Insulation: Rigid plastic spacers with plastic tubing

through

the stack assembly. Lifters of ther moplastic.

Lifter-Roller Assembly: Molded plastic.

Knob: Supplied with a paddle style, screw-on black plastic

knob. See “SPECIAL ORDER FEATURES”.

Temperature Rang e: -22°F to 158°F (-30°C to +70°C).

Leakage Resistance: 1,000 MΩor greater.

MOLDED DUST COVERS

Dust cover is an environment and electrical shield, protecting

and improving appearance and increasing s witch dependability.

Covers enshroud complete switch, preventing build-up of

dust, dir t, contamination.

SPECIAL ORDER FEATURES

1.Talk-Listen (Intercom) function.

2. Fine silver and other alloys available for contacts.

See page 294.

3. UL recognized switches. See page 294.

Part Numbers

◊41203

41206

◊41208

41212

Switching

1-C

2-C

4-A

4-C

Stack Heights

Dimension “X” max.

.531 (13.49)

.615 (15.62)

.750 (19.05)

LT®SWITCH PART NUMBERS

2 POSITION NON-LOCKING*

◊41306

◊41308

41312

41324

Position 1

1-C

2-A

2-C

4-C

Dim.“Y”

.531 (13.49)

.500 (12.7)

.531 (13.49)

.750 (19.05)

Position 2

1-C

2-A

2-C

4-C

Dim.“X”

.531 (13.49)

.500 (12.7)

.531 (13.49)

.750 (19.05)

3 POSITION NON-LOCKING*

SERIES 41000

LT®SWITCH

SERIES 41000

LT®SWITCH SERIES 41000

MOLDED DUST COVER

PANEL OPENING

.469" (11.91mm) DIAMETER

MAXIMUM PANEL THICKNESS

.25" (6.35mm)

P2360

(up to 2-C per side)

P2362

(up to 4-C per side)

*Add suffix “L” to par t number for locking type.

To avoid ordering special switches, order a larger standard circuit,

providing the circuit meets your requirements.

◊Special order only; contact Switchcraft.

LEVER SWITCHES (CONTINUED)

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

299

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

GENERAL PURPOSE STACK SWITCHES

TELEPHONE RELAY TYPE SWITCHES

Compact stack switches are particularly suitable f or low activ ating

force, such as in relay and magnetic operated devices.

Contact Switchcraft for selection of contacts and ratings.

SPECIFICATIONS

Springs: Copper alloy, in thicknesses ranging from

.006" (0.15 mm) to .012" (0.30 mm).

Spacers: Rigid plastic is standard in thickness of .031"

(.79 mm), .047" (1.19 mm) and .063" (1.60 mm).

Contacts: Fine silver or welded cross bar palladium

are standard. Palladium or gold alloy are generally

recommended for “dry” circuit applications. Other contacts

available for varied customer requirements on special order.

Tubing: Thermoplastic.

Lifters: Thermoplastic.

Bracket: Steel, plated.

Mounting Hardware: Pressure plate, twin nut and screws:

Steel, plated.

Complete general purpose stack switch assemblies are

made from a pile-up of various actuator springs, contact

springs and lifters. These stack switch assemblies can be

used on manually operated control devices where switching

is operated by cams, push-buttons and other similar

mechanical devices. The stack switch assembly is made up

of an actuator spring and various contact springs. These

current carrying members are insulated from each other by

phenolic spacers with plastic tubing press fitted through the

stack; thereby insuring correct alignment of contacts and

providing high insulation resistance when mounted.

The types of General Purpose Stack Switch Components

available are:

• .375" (9.52 mm) mounting centers

• .250" (6.35 mm) mounting centers

• “Tini-Stack” Switches .188" (4.78 mm) mounting centers

• Telephone Relay Type Switches .250" (6.25 mm) mounting

centers

STACK SWITCH COMPONENTS

Switchcraft offers various stack switch components, such as

contact springs, spacers, lifters, etc., in many lengths, thicknesses,

mounting centers and other details.

Switchcraft can assemble components into innumerable different

stack switch assemblies. It is impossible to catalog every type of

stack that has been man ufactured.Stack s witch assemblies can be

designed to meet UL requirements, but only as part of equipment.

GENERAL PURPOSE STACK SWITCHES

(SPECIAL ORDER ONLY)

GENERAL PURPOSE STACK SWITCHES

.375" STACK SWITCHES

Thousands of switching combinations are possible. Switch

mounting centers are .375" (9.52 mm) (minimum) with

.25" (6.35 mm) wide switch parts. Practical spring length

is 2.625" (66.68 mm) (maximum). Contact Switchcraft for

selection of contacts and ratings.

.250" (6.35 MM) STACK SWITCHES

Thousands of switching combinations are possible with slightly

smaller parts. Mounting centers are .250" (6.35 mm) (minimum)

with .188" (4.78 mm) wide parts. Practical spring length

is 2.125" (53.98 mm) (maximum). Contact Switchcraft for

selection of contacts and ratings.

Many Tini-Stack®switching combinations are possible.

Switch mounting centers are .188" (4.78 mm) (minimum).

Practical spring length is 1.750" (44.45 mm) (maximum).

SPECIFICATIONS

Springs: Copper alloy, in most standard gauge thickness-

es ranging from .006" (0.15 mm) to .016" (0.41 mm).

Spacers: Rigid plastic, available in thickness of .015"

(0.38 mm), .032" (0.81 mm) and .046" (1.17 mm).

Contacts: Welded cross bar palladium rated at 2A, 200W

AC non-inductive load. Gold alloy generally recommended

for “dry” circuit applications.

Tubing: Thermoplastic.

Lifters: Thermoplastic.

Mounting Hardware: Pressure plate, twin nut and screws:

Steel, plated.

MINIATURE .188" (4.78MM) STACK SWITCHES

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

300

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

GENERAL PURPOSE STACK SWITCHES – COMPONENT SPECIFICATIONS

STACK SWITCH COMPONENT SPECIFICATIONS

1. SPRINGS - Copper alloy in most standard gauge thickness-

es of .006" (0.15 mm), .008" (0.20 mm), .010" (0.25 mm), .012"

(0.30 mm), .016" (0.40 mm) and .020" (0.50 mm), a f ew designs

can be made up to .031" (.079 mm) thick. All or any contact

point hole can be provided; spr ing can be cut at any point.

2. BRACKETS - Standard brackets are detailed on drawing.

Tools are flexible so that various lengths from same width

stock can be provided.

3. LIFTERS OR PUSHERS - .125" (3.18 mm) and .188" (4.78

mm) diameter thermoplastic in various lengths staked into

one of the contact point holds provides tandem action

between blades or to ser ve as an actuator.

4. MOUNTING HARDWARE - Pressure plates (S1293 and

S2300) twin nuts (S1008 and S1431) and scre ws a v ailab le for

mounting.

5. LEAF INSULATORS - Punched in same shape as springs

in .015" (0.38 mm) thickness of fish paper or mylar.

6. SPA CERS - Rigid plastic is standard in thicknesses of .015"

(0.38 mm), .032" (0.81 mm), .051" (1.30 mm) and .062" (1.57

mm).Thickness of .093" (2.36 mm) is a vailable for .375" (9.52

mm) mounting centers only. For longer surface creepage

paths, use both large and standard sized spacers. High tem-

perature insulation also available.

7. THERMOPLASTIC TUBING - .375" (9.52 mm) mounting

centers pass #5 screw. .250" (6.35 mm) mounting centers pass

#3 screw. .188" (4.78 mm) mounting centers pass #2 screw.

8. CAM FOLLOWERS - Two roller bracket designs (G1734

and G2298) available for springs .250" (6.35 mm) wide.

Copper alloy standard. Can be furnished in various diameters

and materials.Ther moplastic rollers also available.

9. CONTACTS - Welded cross bar contacts are commonly

used f or cost savings .Howe ver, riveted contacts are av ailab le.

Size and material depend on circuit requirements (supply

complete details).F or low le v el audio circuits, we suggest gold

alloy or palladium cross bar contacts. Springs can be

bifurcated (two contacts per spring).

HOW TO ORDER STACK SWITCHES

Careful consideration of the following suggestions will help

specify the most economical and expeditious approach to your

switching needs. On initial inquiry or order, supply the following

information:

1. Simple sketch or drawing. See “Typical Stack Assembly”

drawing. Give details checked that are available.

2. Current, voltage and type of switching load (resistive or

inductive).

3. Frequency of operation; life requirements.

4. Details of actuator.

5. Maximum and minimum movement of actuator blade.

6. Any other important specifying details.

It is recommended that data indicated above be forwarded to

Switchcraft for comments and recommendations before finalizing

your design.

GENERAL PURPOSE STACK SWITCHES (continued)

TYPICAL STACK ASSEMBLY

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

301

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MULTIPLE STATION SWITCHES

FEATURES

Switches are designed to meet performance requirements of

sophisticated equipment such as:analog and digital computers,

analyzers, transmitters and receivers, intercoms, machine and

process controls, ground support systems, scientific instruments

and test measurement and instrumentation.

STANDARD MECHANICAL FUNCTIONS

INTERLOCK - actuating a button automatically restores to

normal the button previously actuated. Lock-out feature,

which prevents the mechanical operation of more than one

button at a time, is standard on all interlock switches.

NON-LOCK - each button has momentary action. No interaction

between buttons. Lock-out available on special order only.

ALL-LOCK - all buttons, except release, lock when

depressed (accumulative lock).All buttons restored to normal

by activating release button which has momentar y action.

PUSH-LOCK/PUSH-RELEASE - pushbutton locks when

depressed and is released when again depressed.

LOCK-UP - built-in, electrically operated solenoid locks all

stations (in respective positions).Limited to operation of up to

12 stations only and energized from a remote position. Not

available in push-lock/push-release.

SPECIAL ORDER MECHANICAL FUNCTIONS

Mechanical functions on selected series can be intermixed on

the same frame on special order only. Contact factory for

details and availability.

Multi-Switch switches have been designed to readily

accommodate “special” functions at nominal cost. Special

functions are described at r ight.

Intermixed functions - the follo wing combinations of standard

functions intermixed on the same frame are available:

• Interlock and Non-Lock

• Interlock and Push-Lock/Push-Release

• All-Lock and Non-Lock

• All-Lock and Push-Lock/Push-Release

• Push-Lock/Push-Release and Non-Lock

Lock-out function - Refer to above description under

“Interlock.”

Push-release cancelling function - Speeds programming

and reprogramming of equipment.

Momentary common release function - Permits one or more

momentary common release stations on switch to facilitate

special operating and release sequences.

“Split-interlock” function - Two separate groups of inter-lock

stations on the same frame off ers e xceptional design latitude and

reduces production line time.

GANGED ASSEMBLIES (Special Order)

Multiple row switching (ganged assemblies) with interaction

between rows are available on special order. Space-saving

ganged assemblies reduce production line assembly, wir ing and

testing time. All features of single row switching, including all

standard and special features, are available. Contact Switchcraft

for specifying assistance.

PUSHBUTTONS

Illuminated and non-illuminated switches can be specified with

standard or special pushbuttons. See coverage on individual

series for information.

LEGENDS

Legends can be supplied on illuminated and non-illuminated

pushbuttons. Contact Switchcraft.

MULTIPLE STATION SWITCHES

SERIES IBS SERIES 65000

DW MULTI-SWITCH SERIES 66000, 67000

DW MULTI-SWITCH

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

302

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MULTIPLE-STATION SWITCHES

MULTIPLE-STATION SWITCHES (continued)

CHOOSING THE RIGHT MULTIPLE-STATION SWITCH

Switch

Series

35000

36000

37000

38000

65000

66000

67000

90000

92000

IBS

Mechanical

Functions1

ILO, N, A, PL/PR

ILO, N, A

I, N

Stations

(Maximum)

Switching

Per Station

(Maximum)

6PDT

4PDT

3PDT

4PDT

8PDT

2PDT

Contact

Rating2

2A AC, 200W

3A AC, 0.5A DC

0.5A 28V AC or DC

.125A, 125 VAC

or 28 VDC

Accessories3

C, G, M, P, S, PC/WW

C, G, M, P, S,

PC/WW, LWO

C, G, M, S, PC/WW

P, M

Lighting

Yes

1. I = interlock, ILO = interlock with lockout, N = non-lock (momentary), A = all-lock (special order), PL/PR = push-lock/push-release.

2. Non-inductive load.

3. C = optional switch contact, G = ganged assemblies, M = special/mixed functions, P = optional pushbuttons, S = solenoid release, PC/WW = PC and

wire-wrapping terminals, LWO = lighting wiring options.

ORDERING

Order switches by par t number in this section.

For any optional or special order feature, contact Switchcraft.

SERIES 35000

LITTEL®MULTI-SWITCH SERIES 37000, 38000

LITTEL®MULTI-SWITCH

SERIES 90000, 920000

TINI DW MULTI-SWITCH

12 - ILO, A

18 - N, PL/PR

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

303

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LITTEL MULTI-SWITCH – SERIES 35000

Specify 1 to 18 stations (non-illuminated) with a large

selection of mechanical functions, choice of pushbuttons,

and up to 6 poles of switching per station. Plungers are on

.625" (15.88 mm) centers and are made from .050" (1.27

mm) x .187" (4.75 mm) steel. A square black pushbutton,

A592, is supplied with each station. A wide variety of

special mechanical functions, features and accessories

are also available.

ORDERING INFORMATION

STANDARD SWITCHES

Order by part number from tables.

SPECIAL SWITCHES

Many special mechanical functions, features and

accessories are available. Contact Switchcraft.

• Ganged Assemblies • Pushbuttons

• Special Mechanical Functions • Legends

• Switch Stacks • Accessories

• PC and Wire-Wrapping Ter minals

LITTEL®MULTI-SWITCH

SERIES 35000 TYPICAL PANELS DIMENSIONS

SERIES 35000

MULTIPLE-STATION SWITCHES (continued)

PART NUMBERS/2-C PER STATION1

Interlock

with Lock-Out

35021K206

35041K206

35061K206

35081K206

35101K206

35121K206

Non-Lock

◊35022206

◊35042206

◊35062206

◊35082206

◊35102206

◊35122206

Push-Lock/

Push-Release

◊35027206

◊35047206

◊35067206

◊35087206

◊35107206

◊35127206

Number of

Stations2

PART NUMBERS/4-C PER STATION1

◊35021K212

◊35041K212

◊35061K212

◊35081K212

◊35101K212

◊35121K212

◊35022212

◊35042212

◊35062212

◊35082212

◊35102212

◊35122212

◊35027212

◊35047212

◊35067212

◊35087212

◊35107212

◊35127212

1. Switches with all-lock function are available on special order. Contact

Switchcraft.

2. Odd number of stations (3, 5, 7, 9, 11) are available. Switches with

13 through 18 stations are also available. Contact Switchcraft.

◊Special order only; Contact Switchcraft for price and delivery information.

SERIES 35000

FIGURE A - PANEL CUTOUT FOR

PLUNGER CLEARANCE ONLY

FIGURE B - PANEL CUTOUT FOR

SERIES A590 PUSHBUTTON CLEARANCE ONLY

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

304

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LITTEL MULTI-SWITCH – SERIES 36000, 37000 & 38000 FEATURES

SERIES 36000

Identical to Series 37000, except non-illuminated.Pushbuttons

match Series 37000 and 38000 Switching up to 6PDT.

SERIES 37000

Same as Series 35000, but features large, rectangular face

pushbuttons, illuminated by one lamp and ha ving large legend

area. Switching is up to 4PDT. Switch stations are on .625"

(15.88 mm) centers, and depth behind panel is 2.313" (58.75

mm). Black pushbutton housings have white translucent

inserts, white legend insert, two support inserts, and transpar-

ent display screen. Other pushbuttons and combinations are

possible; see pages 316 and 317.

On 2-C per station switches, each station includes two,

83P switch stacks and one H83P lighting stack, and one

convenience lighting spring. Contact ratings: 2A, 200W

maximum AC non-inductive load.

On 4-C per station switches, each station has 4, 83P switch

stacks, one H83P lighting stack, and one convenience lighting

spring. “L” and “M” lighting arrangements can be effected by

wiring directly to the H83P and H lighting stacks.

Each switch station uses an industry standard T 1-3/4 lamp

(not supplied). Special features such as ganged assemblies,

solenoid release, and T-1 lamp adapter are available; contact

Switchcraft.See pages 316 and 317 for special effects display

screen and inser ts.

SERIES 38000

Similar to Series 37000, except features twin lamp illumination

at each station for redundant or 2-color, split-face (alternate)

lighting.

On 2-C per station switches, each station includes 3, H83P

lighting s witch stacks and 1 lighting spring.This provides up to

3PDT circuitr y (1 pole is needed for lighting lamps; lamps not

supplied).Contact ratings: 2A, 200W maximum AC non-induc-

tive load.

On 4-C per station switches, each station has three, H83P,

two, 83P switching stacks and one lighting spring. This offers

LITTEL®MULTI-SWITCHES

SERIES 36000, 37000, 38000

MULTIPLE-STATION SWITCHES (continued)

SERIES 36000 - NON-ILLUMINATED SERIES 37000 - SINGLE LAMP SERIES 38000 - TWIN LAMPS

5PDT circuitry (1 pole is required f or lighting lamps).two , T 1-3/4

lamps per station are used (lamps are not supplied). Ganged

assemblies and solenoid releases are available;

contact Switchcraft. See pages 316 and 317 for special effects

display screens and inser ts.

LIGHTING

Series 37000 and 38000 can be used in control systems where

the light is either “ON”, or “OFF” or per manently “ON”.

One or any combination of the three lighting arrangements

listed below can be specified on a switch. NOTE: Standard

switches ordered from tables can be wired f or “L”, “M”or “N”type

lighting.

ORDERING

STANDARD SWITCHES

Order by part number from tables.

SPECIAL SWITCHES

Many special mechanical functions, features and accessories

are available. Contact Switchcraft for special order items.

• Ganged Assemblies • Special Mechanical Functions

• Special Color Displays • Pushbuttons

• Legends • Switch Stacks

• Wiring Lighting Options • PC and Wire-wrapping Ter minals

• Accessories

TYPE DESCRIPTION

“L” Pushbuttons light in the “IN” position.

“M” Pushbuttons light in the “OUT” position.

“N” Pushbuttons light in the “IN” and “OUT” positions.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

305

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LITTEL MULTI-SWITCH – SERIES 36000, 37000, & 38000

MULTIPLE-STATION SWITCHES (continued)

MATERIAL SPECIFICATIONS

Frame: Steel, dr y film lubricant.

Plungers, Stack Switch Mounting Brackets and Screws:

Steel, plated.

Stack Switches: Stack switch springs are made of copper

alloy. Solder lugs are hot tin-dipped.

Insulation: Stack switches: rigid plastic spacers with

plastic tubing through stack.

Lifters: Thermoplastic.

LITTEL®MULTI-SWITCHES

SERIES 36000, 37000, 38000 (continued)

Interlock

with Lock-Out

◊37021K1206

◊37041K1206

◊37061K1206

◊37081K1206

◊37101K1206

◊37121K1206

Non-Lock

◊370221206

◊370421206

◊370621206

◊370821206

◊371021206

◊371221206

Push-Lock/

Push-Release

◊370271206

◊370471206

◊370671206

◊370871206

◊371071206

◊371271206

Number of

Stations2

PART NUMBERS / 4-C PER STATION1

◊37021K1212

◊37041K1212

◊37061K1212

◊37081K1212

◊37101K1212

◊37121K1212

◊370221212

◊370421212

◊370621212

◊370821212

◊371021212

◊371221212

◊370271212

◊370471212

◊370671212

◊370871212

◊371071212

◊371271212

1. Switches with all-lock function are available on special order.

Contact Switchcraft.

2. Odd number of stations (3, 5, 7, 9, 11) are available. Switches with

13 through 18 stations also available. Contact Switchcraft.

◊Special order only; Contact Switchcraft for price and delivery information.

PART NUMBERS / 2-C PER STATION1

Interlock

with Lock-Out

◊38021K1206

◊38041K1206

◊38061K1206

◊38081K1206

◊38101K1206

◊38121K1206

Non-Lock

◊380221206

◊380421206

◊380621206

◊380821206

◊381021206

◊381221206

Push-Lock/

Push-Release

◊380271206

◊380471206

◊380671206

◊380871206

◊381071206

◊381271206

Number of

Stations2

PART NUMBERS / 4-C PER STATION1

◊38021K1212

◊38041K1212

◊38061K1212

◊38081K1212

◊38101K1212

◊38121K1212

◊380221212

◊380421212

◊380621212

◊380821212

◊381021212

◊381221212

◊380271212

◊380471212

◊380671212

◊380871212

◊381071212

◊381271212

1. Switches with all-lock function are available on special order.

Contact Switchcraft.

2. Odd number of stations (3, 5, 7, 9, 11) are available. Switches with

13 through 18 stations also available. Contact Switchcraft.

◊Special order only; Contact Switchcraft for price and delivery information.

SERIES 37000 SERIES 38000

TYPICAL PANEL OPENING

SERIES 37000, 38000

PART NUMBERS / 2-C PER STATION1

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

306

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

LITTEL MULTI-SWITCH – SPECIAL EFFECTS COLOR DISPLAY & INSERTS

SPECIAL EFFECTS COLOR DISPLAY SCREENS AND INSERTS

Display screens and inserts are offered in a wide choice of colors for SERIES 37000 and 38000 Littel Multi-Switch switches. Display

screens with high-lights are useful in high ambient lighting;or display screens with soft, unif orm, and diffused lighting for use under lo w

ambient lighting conditions. Order display screens, inserts and filters separately. See Part Number Chart below.

MULTIPLE-STATION SWITCHES (continued)

Part No.

◊40101

◊40103

◊40104

◊40105

◊40108

◊40112

◊40116

◊40401

Figure

Color

Red

Green

Blue

White

Yellow

Clear

“Black Screen”

Red

Part No.

◊40403

◊40404

◊40405

◊40408

◊40412

◊40201

◊40203

◊40204

◊40205

Part No.

◊40208

◊40212

◊40701

◊40703

◊40704

◊40705

◊40708

◊406

40502

40505

Figure

Color

Green

Blue

White

Yellow

Clear (retaining inser t)

Red

Green

Blue

White

Figure

◊Special order only; Contact Switchcraft for

price and delivery information.

Color

Yellow

Clear

(heat shield inser t)

Red

Green

Blue

White

Yellow

White (light divider)

Black (housing)

White

SERIES 401 DISPLAY SCREENS – Display screens with contoured

face give a better oper ation “f eel”.Rectangular shape provides greater

area for engraving legends and symbols. Entire screen is illuminated

by single or twin lamp indication. Various brightness and color

combinations are possible b y use of legend filter and split face inserts.

SERIES 404 LEGEND INSERTS – Small translucent inserts provide

special color effects. White colored inser t (40405) has a special matte

surf ace for in-the-field identification with ink, pencil or lettering transf ers.

Special color effects can be accomplished with combination of a

colored inser t with a clear display screen. IMPORTANT: Order legend

insert (40412) with ever y pushbutton.

SERIES 407 SPLIT-FACE INSER TS – Split-face inserts provide sepa-

rate control or indicating functions through the use of color. Ideal for

use on Series 38000 Littel Multi-Switch switches where each pushb utton

can serve as two indicator lights. Up to two lamps can be used per

display screen which are split lengthwise by 2-color split-face inser ts.

Inser ts may be hot-stamped. Order (406) light divider when “flip-flop”

lighting is specified; or for redundant lighting where a definite visual

indication of lamp failure is desired. A frequently used combination is

red and green.Red might indicate danger, stop, etc. Green, go , “oka y”,

etc. IMPORTANT: Use (40212) clear inser t with a split-face inser t.

SERIES 402 FILTER INSERTS – Inserts add greater color definition.

Ideal for use under low ambient lighting conditions where brightness

of illuminated pushbuttons must be minimized. A white filter insert

(40205) is useful in cutting down the brightness of a white color insert

and a white or clear display screen. However, it is omitted when color

display screen is used. Filters also diffuse light evenly over entire

face of display screen with no “hot spots” or darkened corners.

IMPORTANT: Order clear inser t (40212) for use with every color filter

inser t. Clear inser t snaps in button housing behind a color filter inser t

and ser ves as a heat shield.

406 LIGHT DIVIDER – A light divider is used in the standard pushbutton

housing to separate the illumination from the twin lamps used in the

Series 38000 Littel Multi-Switch switches. Order a light divider for

ever y pushbutton station in the Series 38000 where split-face lighting

has been specified.

Series 405 PUSHBUTTON HOUSINGS – One-piece housing for all

37000 and 38000 switches. Accepts Series 401, 402, 404, 406 and

407 components. Standard color is black. Other colors available.

ORDERING – For variations in pushbutton configurations, contact

Switchcraft.

Series 401 Display Screen

Series 404

Legend inser t recesses into display

screen. Omit when split-face

inser ts are used.

Part Number 404 05

White legend inser t has a matte

finish on one side suitable for

in-the-field marking.

Part Number 404 12

Retaining Insert

Clear inser t snaps into display

screen from rear to retain legend

inser ts. Omit when split-face

inser ts are used.

Series 407 Split-Face Insert

Use with Series 38000

Series 402 Color Filter Inserts

White inser t used with blue, white

and clear display screens; clear

inser t used with red, green and

yellow. All color filters are omitted

where split-face insert is used.

Part Number 402 12 Heat

Shield Insert

Clear filter inser t snaps into

push-button housing. Must be

used in every pushbutton assembly.

Part Number 406

Light Divider Recesses into

pushbutton housing. For use

with Series 38000.

Series 405 02 Pushbutton

Housing.

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

307

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LITTEL MULTI-SWITCH – ACCESSORIES

“TINI-STACK” SWITCHES

Many combinations of stack switches are available on special

order.Contact Switchcraft for specifying assistance , including

clearances for stack heights.

SERIES 80P - Crossbar welded palladium contacts rated: 2A,

200W maximum, AC non-inductive load. For use where

contacts of a released station will return to normal before

contacts of a newly operated station are actuated.

Not recommended for use on push-lock/push/release function.

SERIES 800P - Same as Series 80P but can be used on

push-lock/push-release function, or on other functions where

contacts of a newly operated station must be actuated before

contacts of a released station return to nor mal.

SERIES 80G - Same as Series 80P, except includes

cross-bar welded gold alloy contacts rated at 1A, 100W

maximum, AC non-inductive load.

SERIES 800G - Same as Series 80G except for push-

lock/push-release and/or other functions as described for

Series 800P.

BIFURCATED “TINI-STACK” SWITCH ST A CKS

Double reliability through use of bifurcated switch stacks

featuring bifurcated leaf springs slotted at the contact end and

parallel to the long axis of the leaf spring. Separate crossbar

gold alloy contacts are welded to leaf springs on each side,

doubling the number of contacts on each spr ing.

SERIES 60BG - Similar to Series 80P, except bifurcated leaf

springs with welded crossbar gold alloy contacts rated at 1A,

100W maximum, AC non-inductive load.

SERIES 600BG - Same as Ser ies 60BG, except for use on

push-lock/push-release function and/or functions as

described under Ser ies 800P.

LITTEL®MULTI-SWITCH ACCESSORIES

MULTIPLE-STATION SWITCHES (continued)

HIGH CURRENT “TINI-STACK” SWITCH STACKS

Heavy duty switch stacks Series 60W for use in 120V, AC

power circuits are available with large, fine silver contacts

rated at 5A, non-inductive load. Stack spacer width limits

mounting to one stack/station on each side of frame and

requires special mounting bracket.

For 10 and 15A switching, contact Switchcraft.

POSITIONING SWITCH STACKS

(SERIES 80P, 800P, 80G AND 800G ONLY)

Refer to chart below for proper balancing of the switch stacks

mechanical load at each station, “X”denotes correct positioning

of the stack on the removable switch stack bracket.

SERIES NJ SOLENOID RELEASE

Solenoid assembly attaches to end of switch frame and

provides electrical release of activated stations. Instructions

and hardware furnished. Other voltages are available on

special order ; contact Switchcraft.

Series 60BG

Bifurcated

Switch Stacks

Special

Mounting

Bracket

Mounting

Bracket

Basic Contact Forms

Other contact forms available on special order

Top

Bottom

TYPICAL MOUNTING

Top

Bottom

Series

80P Stacks 1 2 3

A B C D

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

308

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

LITTEL MULTI-SWITCH – ACCESSORIES

LAMP SOCKETS AND ADAPTERS

LAMP SOCKET T10 ◊

Standard on Series 37000, T10 accepts standard midget

flange type T1-3/4 lamps.

LAMP SOCKET T12 ◊

Standard on Series 38000, the T12 socket accepts standard

midget flange type T1-3/4 lamps.

LAMP AD APTER T1

Converts sockets that accommodate standard T 1-3/4,

(P1593) midget flange base lamps to accept T 1 subminiature

lamps. Adapter fits T 1-3/4 lamp socket. The 2-piece adapter

holds lamp securely in place to assure positive contact of

lamp circuit in most environments. If you require extra

long-life, specify a T 1 lamp adapter for each T 1-3/4 socket.

PC TERMINALS

Copper alloy PC terminals are integral with associated leaf

spring and feature shoulders for proper clearance from PC

board and for solid mounting. Contact Switchcraft for details.

◊Available on special order only; Contact factory for price and delivery information.

LITTEL®MULTI-SWITCH ACCESSORIES

MULTIPLE-STATION SWITCHES (continued)

RECOMMENDED WIRE-WRAPPING T OOLS

RECOMMENDED WIRE-WRAPPING PARAMETERS

Wire Gauge

#22 & #24

#25

#26

Wrapping Bit

500131

37006

Sleeve

18840

17611-2

(Gardner -Denver Co. Part Numbers)

Wire

Gauge

#22

#24

Number of

Connections

Wraps Per

Connection

Wire

Gauge

#25

#26

Number of

Connections

Wraps Per

Connection

SHOULDER

LAMP SOCKET T12

LAMP ADAPTER T1

SERIES 37000

WITH WIRE- WRAPPED

TERMINALS

SERIES 35000 WITH

WIRE- WRAP* TERMINALS

* Registered trademark of Gardner-Denver Co.

SERIES 37000 WITH PC TERMINALS

WIRE-WRAPPING TERMINALS

Special order wire-wrapping terminals optimize use of

semi-automated termination equipment to save production

line time.Terminal shoulders accommodate 1, 2 or 3 wrapped

connections per terminal and prevent wrapping tool from

“bottoming” (on first wrapped connection) and possibly

shorting against other metal parts on switch stack. 4-C

switching per station maximum.

NOTE: Stack height dimension will be greater when

wire-wrapping terminals are specified. Stack height for 1-A

and 1-B circuit is .516" (13.11 mm). For 1-C height is .594"

(15.09 mm).

ORDERING: Contact Switchcraft for details.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

309

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

DW MULTI-SWITCH – SERIES 65000

DW MULTI-SWITCH

SERIES 65000

Available with up to 18 non-illuminated stations in a single row.

Maximum switching per station is 4-C (4PDT). Contacts are

rated: 3A, AC, 0.5A DC, 125V, non-inductive load. Integral

blac k button is supplied with each station.Switches mount with

#6 screws and n ut (not furnished). Contact Switchcraft f or spe-

cial assemblies, with ganged assemblies, solenoid release,

PC or wire-wrapping terminals, or escutcheon modules.

MULTIPLE-STATION SWITCHES (continued)

PART NUMBERS / 2-C PER STATION1

Interlock

with Lock-Out

65021K206

65041K206

65061K206

65081K206

65101K206

65121K206

Non-Lock

◊65022206

◊65042206

◊65062206

◊65082206

◊65102206

◊65122206

Push-Lock/

Push-Release

◊65027206

◊65047206

◊65067206

◊65087206

◊65107206

◊65127206

Number of

Stations2

1. Switches with all-lock function are available on special order. Contact Switchcraft.

2. Odd number of stations (3, 5, 7, 9, 11) are available. Switches with

13 through 18 stations also available. Contact Switchcraft.

◊Special order only; Contact Switchcraft for price and delivery information.

PART NUMBERS / 4-C PER STATION1

Interlock

with Lock-Out

◊65021K212

◊65041K212

◊65061K212

◊65081K212

◊65101K212

◊65121K212

Non-Lock

◊65022212

◊65042212

◊65062212

◊65082212

◊65102212

◊65122212

Push-Lock/

Push-Release

◊65027212

◊65047212

◊65067212

◊65087212

◊65107212

◊65127212

Number of

Stations2

1. Switches with all-lock function are available on special order.

Contact Switchcraft.

2. Odd number of stations (3, 5, 7, 9, 11) are available. Switches with

13 through 18 stations also available. Contact Switchcraft.

◊Special order only; Contact Switchcraft for price and delivery information.

SERIES 65000 - Four-station with

DW Escutcheon Modules installed

PANEL CUTOUT DIMENSIONS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

310

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

DW MULTI-SWITCH – SERIES 66000 & 67000

SERIES DW40 COLOR INSERTS

Many unusual lighting effects can be created using DW40 color

inserts. Molded from dimensionally stable, high-temperature

plastic in six standard colors, inserts slip into standard Series

DW300 pushbuttons providing unusual latitude in custom

designing color and legend eff ects.With no wear from finger-tips,

legend life is vir tually unlimited.

MULTIPLE-STATION SWITCHES (continued)

NON-ILLUMINATED DW MULTI-SWITCH SWITCHES

Switchcraft offers DW Multi-Switch switches, Series 70000

and 71000 with crossbar plungers which accept a wide variety

of Switchcraft and industry pushbuttons. Contact Switchcraft

for specifying assistance.

PART NUMBERS/2-C PER STATION1

Interlock

with Lock-Out

67021K506

67041K506

67061K506

67081K506

67101K506

67121K506

Non-Lock

◊67022506

◊67042506

◊67062506

◊67082506

◊67102506

◊67122506

Push-Lock/

Push-Release

◊67027506

◊67047506

◊67067506

◊67087506

◊67107506

◊67127506

Number of

Stations2

PART NUMBERS/4-C PER STATION1

◊67021K512

◊67041K512

◊67061K512

◊67081K512

◊67101K512

◊67121K512

◊67022512

◊67042512

◊67062512

◊67082512

◊67102512

◊67122512

◊67027512

◊67047512

◊67067512

◊67087512

◊67107512

◊67127512

1. Switches with all-lock function are available on special order. Contact

Switchcraft.

2. Odd number of stations (3, 5, 7, 9, 11) are available. Switches with

13 through 18 stations also available. Contact Switchcraft.

◊Special order only; Contact Switchcraft for price and delivery information.

Part No.

◊DW41

◊DW43

Color

Red

Green

Part No.

◊DW44

◊DW45

Color

Blue

White

Part No.

◊DW47

◊DW48

Color

Orange

Yellow

Part No.

DW301

DW302

DW303

Color1

Red

Black

Green

Part No.

DW304

DW305

DW308

Color1

Blue

White

Yellow

Part No.

DW312

DW313

DW316

Color1

Clear

Amber

“Black-

Screen”

SERIES DW300 PUSHBUTTONS (DW305 supplied standard)

1 Other colors available on special order.Buttons are 0.594 (15.09) x 0.594 (15.09)

DW MULTI-SWITCH

SERIES 66000 and 67000

Squeeze upper and

lower surfaces of

pushbutton and

pull free of

plungers.

Next, grasp lamp with

lamp removal tool or

finger tips and snap-

out. Replace lamp

and pushbutton.

Finished in seconds!

◊Special order only; Contact Switchcraft for price and delivery information.

Series 66000 (non-illuminated) and 67000 (illuminated) can

be supplied with up to 18 stations, including a square white

pushbutton P art Number DW305 at each station.Contacts and

ratings are the same as for Series 65000. Lamp sockets

(67000) at each station accept 6V to 28V T 1-3/4 flange base

lamps (not supplied). Mounts with 2 #6-32 machine screws

(not supplied).See page 310 for pushb utton data.Accessories

include solenoid release, ganged assemblies, T1 lamp

adapter, and metal barriers (between stations). PC and

wire-wrapping terminals are also av ailable.Contact Switchcraft.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

311

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

DW SWITCH – ACCESSORIES

SPECIAL SWITCHING FORMS

In addition to 2-C and 4-C switching, other circuit forms can

be supplied on special order. They are: 1-A, 2-A, 3-A, 4-A,

1-B, 2-B, 3-B, 4-B, 1-C, 3-C, 1-D, 2-D, 3-D, and 4-D.

BARRIERS (SERIES 67000 ONLY)

As an option, (field installable) barriers can be specified and

installed. Sturdy wire barriers fit between pushbuttons and

prevent accidental simultaneous actuation of adjacent

push-buttons. When a pushbutton is depressed, the fingertip

is guided aw a y from adjacent pushb uttons, and all pressure is

applied to the correct pushbutton.

Switchcraft Part Number ◊P2359 Barriers (package of 25)

SOLENOID RELEASE

Solenoids provide electromechanical assistance in releasing loc k ed

switch stations in switches with up to 12 stations. Release can be

eff ected from a local or remote position.Solenoids are av ailable f or use

with switches having inter-lock, all-lock, or push-lock/push-release

mechanical functions. All solenoids are “pull-type”. When ordered

separately, solenoids are supplied with all mounting hardware.Brass

terminals accept “push-on” type clips (ARK-LES #3500M20C), or

wiring can be soldered directly to the lugs.

SPECIFICATIONS

Frame, Latch Bar, and Switch Housing: Steel, plated.

Mounting Studs (Series 66000 and 67000):

Same as frame above.

Pushbutton Actuators (Series 65000): Molded thermoplastic.

Pushbuttons (Series 66000 and 67000):

Molded thermoplastic.

Terminals: Copper alloy, silver-plated.

Contactors: Copper alloy, plated.

Terminal Board: Rigid plastic.

Lamp Socket (Series 67000): Copper alloy, plated.

DW MULTI-SWITCH ACCESSORIES

MULTIPLE-STATION SWITCHES (continued)

Series DW-100

(without barrier)

◊DW101

DW102

DW05

Series DW-200

(with barrier)

◊DW201

DW202

DW205

Color*

Red

Black

White

Part

Number

◊DW1

◊DW3

◊DW4

◊DW7

Mounting*

Left

Right

Left

Right

Voltage

115 AC,

60 Hz

115 AC,

60 Hz

24 DC

Coil Res.

(Ohms)

361

130

14.2

8.96

Duty

Cycle

20%

10%

20%

10%

* Direction indicates side of switch frame solenoid is mounted on

(solenoid terminals up).

PANEL OPENING

DW100

DW200

* Other colors available on special order.

◊Special order only; Contact Switchcraft for price and delivery information.

Switch

Function

Interlock

All-Lock

Interlock

All-Lock or

Push-

Lock/Push-

Release

ESCUTCHEON MODULES, SERIES DW100 AND DW200

Modules are available in colors to match or contrast with

Series 65000 pushbutton colors. Modules are simply slipped

over the pushbuttons before the switch is mounted on the

panel. Flanges on modules overlap the panel cutout and hold

modules securely in place while adding only 0.02" (.051 mm)

behind panel space.

One module is required for each station. Installation of the

Series DW200 Modules (with barrier) is equally simple. First,

place one Series DW100 Module over the pushbutton

actuator on one end of the row. On the adjacent actuator,

place a Series DW200 Module. Position this module so that

the barrier overlaps the edge of the Series DW100 Module.

Install the remaining Series DW200 modules in the same

manner, with the barriers overlapping. The completed

escutcheon will have barriers between adjacent pushbutton

actuators, but no barriers at the ends of the rows.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

312

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TINI DW MULTI-SWITCH – SERIES 90000 & 92000

SPECIFYING NOTE:

Series 90000 Part Numbers are given in tab le .To order Series

92000 switches, substitute “2” for “0” for second digit of Part

Number. Example; Part Number 92024B06 in the Series

92000 version 0.590" (15mm centers) of Part Number

90024B06 0.394" (10mm centers) interlock with lock-out, 2-C

switching per station.

MULTIPLE-STATION SWITCHES (continued)

Part Number

◊A6501

◊A6502

◊A6503

Color

Red

Black

Green

Color

Blue

White

Yellow

Part Number

◊A6504

◊A6505

◊A6508

PART NUMBERS/2-C PER STATION1

PUSHBUTTONS

Interlock

with Lock-Out

◊90024B06

◊90044B06

◊90064B06

◊90084B06

◊90104B06

◊90124B06

Non-Lock

◊90022B06

◊90042B06

◊90062B06

◊90082B06

◊90102B06

◊90122B06

Push-Lock/

Push-Release

◊90027B06

◊90047B06

◊90067B06

◊90087B06

◊90117B06

◊90127B06

Number of

Stations2

PART NUMBERS/4-C PER STATION1

◊90024B12

◊90044B12

◊90064B12

◊90084B12

◊90104B12

◊90124B12

◊90022B12

◊90042B12

◊90062B12

◊90082B12

◊90102B12

◊90122B12

◊90027B12

◊90047B12

◊90067B12

◊90087B12

◊90117B12

◊90127B12

1 Switches with all-lock function are available on special order. Contact Switchcraft.

2 Odd number of stations (3, 5, 7, 9, 11) are available. Switches with 13 through

18 stations also available. Contact Switchcraft.

◊Special order only; Contact Switchcraft for price and delivery information.

SERIES 92000 Switch TDW-F

Flip-Flop Pushbutton Installed

SERIES 90000 with

A-650 Pushbuttons Installed

Buttons are 0.386 (9.80 mm) x 0.386 (9.80 mm).

◊Special order only; Contact Switchcraft for price and delivery information.

TINI®DW MULTI-SWITCH – SERIES 90000, 92000

Subminiature, multiple station switches have pushbuttons on

0.394" (10mm), 0.590" (15mm), or 0.787" (20mm) centers.

Four mechanical functions: Interlock, Non-Lock, All-Lock and

Push-Lock/Push-Release. Switches mount in panels up to

.343" (8.71mm) thick. Switching per station is 2-C (2PDT),

4-C (4PDT), 6-C (6PDT) or 8-C (8PDT).Contact ratings:0.5A,

28V AC or DC non-inductive. Solder lug or PC terminals.

SERIES 90000 - Up to 18 stations on 0.394" (10mm) centers

in a row. Switch mounts with 2, #3 screws (not supplied).

SERIES 92000 - 15mm station centers. Wider spacing

permits mounting Ser ies TDWF pushbuttons.

SPECIFICATIONS

ELECTRICAL

Switching Module Rating: 0.5A, 28V AC or DC

non-inductive load.

Initial Contact Resistance: 10 milliohms.

MATERIALS

Frame Switch Housing: Steel, plated.

Latch Bar: Stainless steel on all-lock function;

zinc alloy on inter lock function.

Latch Bar Return Spring: Tinned music wire.

Plunger: Molded ther moplastic.

Plunger Return Spring: Tinned music wire.

Terminals/Contacts: Copper alloy, silver-plated.

Contact Sliders: Bifurcated bimetal (silver on copper alloy).

Terminal Board: Molded ther moplastic (UL 94V-0).

Pushbuttons: Molded thermoplastic.

Pushbuttons for Tini DW Multi-Switch switches must be specified

separately, below. Refer to page 316 for data on TWDF pushbuttons.

Series A650 pushbuttons can be specified for both Series

90000 and 92000. Legends can be specified; contact

Switchcraft.

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

313

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

TINI DW MULTI-SWITCH – SERIES 90000 & 92000

TINI®DW MULTI-SWITCH

SERIES 90000 and 92000

MULTIPLE-STATION SWITCHES (continued)

NOTE:

For Series 90000 “A” dimension is .394" (10.0mm)

For Series 92000 “A” dimension is .590" (15.0mm)

PANEL OPENING SERIES 92000

WITH TDW-F PUSHBUTTONS

RECOMMENDED

PC BOARD LAYOUT

(Component Side)

PANEL OPENING SERIES 90000

WITH SERIES A-650 PUSHBUTTONS

PANEL OPENING SERIES 92000

WITH SERIES A-650 PUSHBUTTONS

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

314

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

IBS MULTI-SWITCH – SERIES IBS

IBS MULTI-SWITCH SWITCHES

SERIES IBS

Series IBS miniature pushbutton s witches are mounted on common

frames, up to 12 stations long with center-to-center spacing of

0.394" (10mm), 0.590" (15mm) or 0.787" (20mm). Available with

interlock, non-lock (momentary) or push-lock/push-release

mechanical functions. .130" (3.30mm) x .130" (3.30mm) square

plungers accept a full line of industry standard pushbuttons.

Switches are stocked without pushbuttons due to wide variety

that can be used. Order pushbuttons separately. Switches have

.157" (4mm) long PC terminals for mounting single- or double-

sided PC boards up to .094" (2.39mm) thick. Close stacking

(centers) permits high density within minimum front panel space.

PUSHBUTTONS

Pushbuttons designed for IBS switches are available in white,

black, red, blue and gray. Others colors are available on special

order. Pushbutton faces are concave for operator convenience

and can be mounted either horizontally or vertically.

Pushbuttons must be ordered separately, but may be factory

installed, if desired, at nominal extra cost.

SPECIFICATIONS

MECHANICAL

Switch Actuation: Momentar y, interlock and push-lock/

push-release.

Plunger T ravel: .144" (3.66 mm).

Actuation Force: At .135" (3.43mm) travel: 12-15 oz.

ELECTRICAL

0.125A resistive @ 125 V AC, .25 AMP at 28V DC.

MATERIALS

Housing: Thermoplastic 94V-0.

Plunger: Ther moplastic UL 94V-0.

Contactors: Copper alloy.

Terminals: Copper alloy, solder plated. Tin-dipped

available on special order.

Contact Surfaces: Plated.

Frame: Copper alloy.

Latch Bar: Thermoplastic.

MULTIPLE-STATION SWITCHES (continued)

PART NUMBERS/0.394" (10MM) CENTERS1

Interlock

◊IBS10B02106AR

◊IBS10B04106AR

◊IBS10B06106AR

◊IBS10B08106AR

◊IBS10B10106AR

◊IBS10B12106AR

Number of Stations2

PART NUMBERS/0.590" (15MM) CENTERS1

◊IBS15B02106AR

◊IBS15B04106AR

◊IBS15B06106AR

◊IBS15B08106AR

◊IBS15B10106AR

◊IBS15B12106AR

1. Switches with all-lock function are available on special order.

Contact Switchcraft.

2. Odd number of stations (3, 5, 7, 9, 11) are available. Switches with

13 through 18 stations also available. Contact Switchcraft.

◊Special order only; Contact Switchcraft for price and delivery information.

PART NUMBERS/0.787" (20MM) CENTERS1

◊IBS20B02106AR

◊IBS20B04106AR

◊IBS20B06106AR

◊IBS20B08106AR

◊IBS20B10106AR

◊IBS20B12106AR

Type I

P2936

P2937

P2938

◊P2939

◊P2940

P2941

P2942

◊P2943

Type II

P2951

P2952

P2953

◊P2954

◊P2955

P2956

P2957

◊P2958

◊P2979

◊P2992

Color

White

Black

Red

Yellow

Green

Blue

Gray

Brown

Cream

Tangerine

PUSHBUTTON PART NUMBERS

◊Available on special order only; contact Switchcraft for price and deliver y.

IBS10B04106AR

TYPE I

0.388 (9.86) x 0.216 (5.49) TYPE II

0.464 (11.79) x 0.288 (7.32)

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

315

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

IBS MULTI-SWITCH – SERIES IBS

IBS MULTI-SWITCH SWITCHES

SERIES IBS

MULTIPLE-STATION SWITCHES (continued)

IBS XX

CENTERS

0.394" (10mm)

0.590" (15mm)

0.787" (20mm)

FRAME STYLE

A - Mounting Ears

B - No Mounting Ears

STATIONS

01 - 12

MECHANICAL

FUNCTION

1 - Interlock

2 - Non-Lock

XX1

CIRCUITS

01 - 1A

02 - 1B

03 - 1C

04 - 2A

05 - 2B

06 - 2C

TERMINAL

LENGTH

A - 0.157"

(4mm)

* 8 stations maximum on 0.787" (20mm) centers.

1. See page 269 for individual switch terminal conjunction.

STATIONS

0.394" (10mm) CENTERS

DIMENSIONS

RECOMMENDED

PC BOARD

LAYOUT

(Component Side)

(.300 x .100)

(7.62 mm) x (2.54)

0.590" (15mm) CENTERS

0.787" (20mm) CENTERS

IBS PART NUMBERING CODE

0.394" (10mm) 0.590" (15mm) 0.787" (20mm)

Dimension

* Please visit the product pages on our website for the most up-to-date product information

SWITCHES

316

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MULTI-SWITCH PUSHBUTTONS

SPECIFYING NOTE:

Most pushbuttons can be specified in red, black, green, blue,

white or yello w.“Black-Screen”, amber , clear, and other colors

are also possible .Contact Switchcraft with y our requirements.

Unique internal “flip-flop” mechanism permits button face to

change colors without electrical energy, lamps or wiring.When

pushbutton is oper ated, highly reflectiv e panels inside housing

change position and use ambient light to give a bright illumi-

nated effect. Black pushbuttons are .59" (15mm) high x .63"

(16mm) wide.Display window is .315" (8mm) x .374" (9.5mm)

wide.

NOTE: “FLIP-FLOP” PUSHBUTTONS ARE DESIGNED

FOR USE WITH SERIES 92000 SWITCHES ONLY.

Order “flip-flop” pushbuttons with Ser ies 92000 switches.

TDW-F “Flip-Flop” Pushbutton Part Numbering

MULTI-SWITCH PUSHBUTTONS

SERIES TDWF - “FLIP-FLOP” PUSHBUTTONS

MULTIPLE-STATION SWITCHES (continued)

1. Any pushbutton series can be specified with engraved legends.

2. Buttons are an integral part of switch assembly on Series 65000.

3. Switches stocked without pushbuttons due to wide variety that can be used.

Order buttons separately.

4. Display screens and inserts are also available in a wide choice of colors;

see “SPECIAL EFFECTS COLOR DISPLAY SCREENS AND INSERTS”.

5. Double width button

6. Colored inser ts are available in a wide choice of colors;

see “SERIES D W40 COLOR INSERTS”.

TDW-F “FLIP-FLOP” PUSHBUTTON PART NUMBERING

Illuminated Non-Illuminated

Switch Series Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9

Pushbutton Series140044095DW3006A-590 E-5905A-650 TDW-F Type I Type II

35000 X-(Std.) X

37000 X (Std.) X

38000 X (Std.) X

650002

67000 X (Std.)

900003X

920003XX

IBS3XX

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

317

SWITCHES

FAX: 773 792-2129

SWITCHES

DIMENSIONS ARE FOR REFERENCE ONLY Inch

(mm)

MULTI-SWITCH PUSHBUTTONS – SERIES X, Y, & Z GLO-BUTTON

SERIES X,Y AND Z “GLO-BUTTON”

Non-illuminated pushbuttons provide a clearly visible legend

like illuminated pushbuttons - without lamps, wiring or power.

With button depressed, illuminator moves up behind front

screen, and legend “lights up” by efficient reflection of exter-

nal ambient light. With button in “out” position, illuminator

retracts and legend appears non-luminous.Series X - specify

for horizontal or vertical mount switches. Series Y - legends

marked across .625" (15.88 mm) dimension. For horizontal

mount switches. Series Z - legends marked across .75"

(19.05 mm) dimension. For ver tical mount switches.

Horizontally Mounted Switches: Three, .125" (3.18 mm)

high characters, each pushbutton.

Vertically Mounted Switches: Three, .125" (3.18 mm)

high characters, each pushbutton.

MULTI-SWITCH PUSHBUTTONS

TDWF PUSHBUTTON LEGENDS (special order)

MULTIPLE-STATION SWITCHES (continued)

Part

Number

X21248◊

X51248◊

Y21248◊

Y28248◊

Y51248◊

Z21248◊

Z28248◊

Z51248

Figure

Screen

Color

Black

White

Black

White

Black

White

Illuminator

Color

Orange-Red

Chartreuse

Orange-Red

Chartreuse

Orange-Red

Width

(12.7)

.625

(15.88)

.75

(19.05)

Height

(12.7)

.75

(19.05)

.625

(15.88)

Size inches (mm)

MULTI-SWITCH PUSHBUTTON PART NUMBERS

Use the information below to specify colors of the pushbutton series

desired. Series TDWF must be specified separately (see page 316).

PART

NUMBER

◊40001

◊40002

◊40003

◊40004

40005

◊40008

40012

◊40901

◊40902

◊40903

◊40904

◊40905

◊40908

◊40912

A591

A592

◊A593

◊A594

A595

◊A596

◊A598

◊E591

◊E592

◊E594

◊E595

◊E596

◊E598

FIGURE COLOR

Red

Black

Green

Blue

White

Yellow

Clear

Red

Black

Green

Blue

White

Yellow

Clear

Red

Black

Green

Blue

White

Brown

Yellow

Red

Black

Blue

White

Brown

Yellow

.594 (15.09)

1.219 (30.96)

.594 (15.09)

1.234 (31.34)

.974 (24.7)

.719 (18.26)

.594 (15.09)

Overall Size Inch (mm)

Width Height

◊Available on special order only; contact Switchcraft for price and deliver y.

LEGEND CHARACTERS AVAILABLE

1 through 999

.Period

- Short Dash

Arrow

# Number or Pound

$ Dollar

| Vertical Bar

A through ZZZ

“ Quotes

-- Long Dash

& Ampersand

/ Slash

¢ Cent

NOTE: Recommended minimum standoff for switches mounted with

TDW-F pushbutton is .5" (12.7mm).

* Please visit the product pages on our website for the most up-to-date product information

NOTES

318

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

319

FAX: 773 792-2129

INDEX

03BL2M................................................47

05BL3M................................................47

05BL5M................................................47

05CL3M ...............................................46

05CL5M ...............................................46

05DL3M ...............................................47

05DL5M ...............................................47

05GM3M..............................................46

05GM5M..............................................46

05YL3M................................................47

05YL5M................................................47

06AL5F.................................................48

06EL5F.................................................48

09BL4M................................................47

09CL4M ...............................................46

09DL4M ...............................................47

09GM4M..............................................46

09YL4M................................................47

101......................................................274

101S...................................................274

102......................................................274

102S...................................................274

103......................................................274

103S...................................................274

11..........................................................94

11001.................................................231

11001L...............................................231

11002.................................................231

11002L...............................................231

11003.................................................231

11003D ..............................................231

11003DL............................................231

11003L...............................................231

11004.................................................231

11004L...............................................231

11005.................................................231

11005L...............................................231

11006.................................................231

11006D ..............................................231

11006DL............................................231

11006L...............................................231

11008.................................................231

11008L...............................................231

11009.................................................231

11009L...............................................231

11012.................................................231

11012L...............................................231

111........................................................98

111PC..................................................98

111PCS..............................................100

11201.................................................231

11201L...............................................231

11202.................................................231

11202L...............................................231

11203.................................................231

11203D ..............................................231

11203DL............................................231

11203L...............................................231

11204.................................................231

11204L...............................................231

11205.................................................231

11205L...............................................231

11206.................................................231

11206D ..............................................231

11206DL............................................231

11206L...............................................231

11208.................................................231

11208L...............................................231

11209.................................................231

11209L...............................................231

11212.................................................231

11212L...............................................231

112A.....................................................98

112APC................................................98

112APCS...........................................100

112B.....................................................98

112BPC................................................98

112BPCS...........................................100

113........................................................98

113B.....................................................98

113BPC................................................98

113BPC1M..........................................98

113BPCS...........................................100

113D.....................................................98

113DPC ...............................................98

113E.....................................................98

113EPC................................................98

113EPCS...........................................100

113F.....................................................98

113FPC................................................98

113FPCS...........................................100

113PC..................................................98

113PCS..............................................100

114B.....................................................98

114BPC................................................98

114BPC1M..........................................98

114BPCS...........................................100

120......................................................108

1200 ...................................................203

12001.................................................297

12002.................................................297

12003.................................................297

12003D ..............................................297

12004.................................................297

12005.................................................297

12006.................................................297

12006D ..............................................297

12010.................................................297

12011.................................................297

12012.................................................297

12013.................................................297

12014.................................................297

12015.................................................297

12016.................................................297

12017.................................................297

12033.................................................297

12033T...............................................297

12034.................................................297

12035.................................................297

12036.................................................297

12036D ..............................................297

12037.................................................297

12037T...............................................297

121......................................................108

1230 ...................................................108

1238 ...................................................108

125......................................................109

128......................................................108

12A.......................................................94

12B.......................................................94

12BL5M................................................47

12BL6M................................................47

12CL5M ...............................................46

12DL5M ...............................................47

12DL6M ...............................................47

12GM5M..............................................46

12GM6M..............................................46

12YL5M................................................47

13..........................................................94

131......................................................108

133......................................................155

1332A.................................................203

1332B.................................................203

1334B.................................................203

1394RAPC...........................................58

1394SMT.............................................58

13A.......................................................94

13AL5F.................................................48

13AL6F.................................................48

13B.......................................................94

13E.......................................................94

13EL5F.................................................48

1400 ...................................................203

1400301.............................................203

1400315.............................................203

142A...................................................110

14B.......................................................94

151......................................................107

152......................................................107

152B...................................................107

153......................................................107

1532A.................................................203

1532A301 ..........................................203

1532B.................................................203

1532B301 ..........................................203

1534B.................................................203

154......................................................107

155......................................................107

15AL7F.................................................48

15AL8F.................................................48

15BL7M................................................47

15BL8M................................................47

15CL7M ...............................................46

15CL8M ...............................................46

15DL7M ...............................................47

15EL8F.................................................48

15GM7M..............................................46

15GM8M..............................................46

15J9068.............................................230

15J9076.............................................230

15J9077.............................................230

15J9078.............................................230

160......................................................147

1600 ...................................................212

1632A.................................................212

1632B.................................................212

1634B.................................................212

16J1055.............................................223

170......................................................147

1700 ...................................................212

172......................................................148

173......................................................152

174S...................................................152

175......................................................152

176S...................................................152

177S...................................................152

178......................................................152

1789 ...................................................212

179......................................................152

181......................................................148

182......................................................148

182QB................................................147

182QBD.............................................147

184......................................................147

184L ...................................................147

187......................................................149

187B...................................................149

187BD................................................149

187BL.................................................149

187D...................................................149

187L ...................................................149

188......................................................149

18QA18..............................................262

18QB18..............................................262

18QD18..............................................262

18QF18..............................................262

18QH18..............................................262

18QK18..............................................262

18QN18..............................................262

190......................................................151

190A...................................................151

190B...................................................151

190BL.................................................151

201......................................................274

201S...................................................274

202......................................................274

202S...................................................274

203......................................................274

203S...................................................274

20GM8M..............................................46

20Q*20**............................................262

220......................................................153

225......................................................153

226......................................................154

227......................................................153

228......................................................153

229......................................................153

22QB22..............................................263

22QD22..............................................263

22QF22..............................................263

22QK22..............................................263

22QN22..............................................263

230......................................................153

2300......................................................86

2331......................................................86

2332A...................................................86

2332B...................................................86

2333......................................................86

235......................................................153

236......................................................154

237......................................................153

238......................................................153

239......................................................153

240......................................................145

2400 ...................................................205

2432A.................................................205

2432B.................................................205

2434B.................................................205

245......................................................145

24B.....................................................109

25........................................................109

250......................................................145

2501F...................................................65

2501M..................................................65

2501MP................................................65

2532A.................................................205

2532B.................................................205

2533 ...................................................205

2533B.................................................205

2534B.................................................205

2542B.................................................205

2544B.................................................205

255......................................................145

2588 ...................................................205

2589 ...................................................205

260......................................................145

2600 ...................................................205

2600301.............................................205

2600310.............................................205

267......................................................145

269......................................................145

26U1003............................................278

26U1004............................................278

26U1005............................................278

26U1006............................................278

26U1007............................................278

26U1008............................................278

26U1009............................................278

26U1010............................................278

270..............................................145-146

2732A.................................................205

2732A301 ..........................................205

2732B.................................................205

2732B301 ..........................................205

2733B.................................................205

2734B.................................................205

2734B301 ..........................................205

2789 ...................................................205

280..............................................145-146

281..............................................145-146

282......................................................155

285..............................................145-146

285L ...................................................145

288..............................................145-146

* Please visit the product pages on our website for the most up-to-date product information

320

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

INDEX

290..............................................145-146

297..............................................145-146

298.............................................146, 155

299......................................................150

2BL6M..................................................47

2C1072 ..............................................134

2P-1216 .............................................148

2P1248...............................................145

2P1251...............................................147

2P1298...............................................145

2P1384...............................................157

2P1419...............................................158

2P1495...............................................145

2P1509...............................................153

2P1515...............................................162

2P1624...............................................162

2P2003...............................................143

305HJ084184....................................247

305KD084184...................................247

306HK042306...................................247

306HK084306...................................247

321........................................................27

322........................................................27

323........................................................27

324........................................................27

32HR***..............................................240

330F1.................................................161

330F2.................................................161

332A...................................................159

336A...................................................159

336B...................................................159

33HR***..............................................240

340......................................................159

345A...................................................159

349A...................................................159

350......................................................148

3501F.................................................123

3501FP ..............................................123

3501FR..............................................123

3501M................................................161

3501MC.............................................161

3502 ...................................................161

35021K206........................................303

35021K212........................................303

35022206...........................................303

35022212...........................................303

35027206...........................................303

35027212...........................................303

3502A.................................................161

3502AAU............................................161

3502ABAU.........................................161

3502RA..............................................161

3502RAAU.........................................161

3502RABAU......................................161

3503 ...................................................123

35041K206........................................303

35041K212........................................303

35042206...........................................303

35042212...........................................303

35047206...........................................303

35047212...........................................303

3504M................................................161

3505F.................................................123

35061K206........................................303

35061K212........................................303

35062206...........................................303

35062212...........................................303

35067206...........................................303

35067212...........................................303

3507 ...................................................161

35081K206........................................303

35081K212........................................303

35082206...........................................303

35082212...........................................303

35087206...........................................303

35087212...........................................303

35101K206........................................303

35101K212........................................303

35102206...........................................303

35102212...........................................303

35107206...........................................303

35107212...........................................303

35121K206........................................303

35121K212........................................303

35122206...........................................303

35122212...........................................303

35127206...........................................303

35127212...........................................303

3514PC..............................................123

3515PC..............................................123

3517PC..............................................123

352A...................................................159

35581.................................................161

35582.................................................161

35585.................................................161

35HDBAU..........................................156

35HDBAUS........................................156

35HDBN.............................................156

35HDBNS..........................................156

35HDNAU..........................................156

35HDNAUS .......................................156

35HDNN ............................................156

35HDNNS..........................................156

35HDRAAU .......................................156

35HDRABAU.....................................156

35HDRANN.......................................156

35HR***..............................................240

35PM1................................................119

35PM2A.............................................119

35RAPC2AH3...........................114, 116

35RAPC2AHN2........................114, 116

35RAPC2AHN3 ................................114

35RAPC2AV..............................114-115

35RAPC2AV4............................114-115

35RAPC2AVN4.................................114

35RAPC2BH3...........................114, 116

35RAPC2BHN2........................114, 116

35RAPC2BHN3 ................................114

35RAPC2BV4............................114-115

35RAPC2BVN4.................................114

35RAPC3BH3...........................114, 116

35RAPC3BHN2........................114, 116

35RAPC3BHN3 ................................114

35RAPC3BV4............................114-115

35RAPC3BVN4.................................114

35RAPC4BH3...........................114, 116

35RAPC4BHN2........................114, 116

35RAPC4BHN3 ................................114

35RAPC4BV4............................114-115

35RAPC4BVN4.................................114

35RAPC7J.........................................112

35RAPC7JS......................................112

35RASMT..........................................117

35RASMT2AHNTR...........................117

35RASMT2BHNTR...........................117

35RASMT3BHNTR...........................117

35RASMT4BHNTR...........................117

361A ..........................................159, 265

362A...................................................265

363......................................................159

364A...................................................159

365......................................................159

36HR***..............................................240

37021K1206......................................305

37021K1212......................................305

370221206.........................................305

370221212.........................................305

370271206.........................................305

370271212.........................................305

37041K1206......................................305

37041K1212......................................305

370421206.........................................305

370421212.........................................305

370471206.........................................305

370471212.........................................305

37061K1206......................................305

37061K1212......................................305

370621206.........................................305

370621212.........................................305

370671206.........................................305

370671212.........................................305

37081K1206......................................305

37081K1212......................................305

370821206.........................................305

370821212.........................................305

370871206.........................................305

370871212.........................................305

370A...................................................159

37101K1206......................................305

37101K1212......................................305

371021206.........................................305

371021212.........................................305

371071206.........................................305

371071212.........................................305

37121K1206......................................305

37121K1212......................................305

371221206.........................................305

371221212.........................................305

371271206.........................................305

371271212.........................................305

374......................................................159

376......................................................159

377......................................................159

380......................................................148

38021K1206......................................305

38021K1212......................................305

380221206.........................................305

380221212.........................................305

380271206.........................................305

380271212.........................................305

38041K1206......................................305

38041K1212......................................305

380421206.........................................305

380421212.........................................305

380471206.........................................305

380471212.........................................305

38061K1206......................................305

38061K1212......................................305

380621206.........................................305

380621212.........................................305

380671206.........................................305

380671212.........................................305

38081K1206......................................305

38081K1212......................................305

380821206.........................................305

380821212.........................................305

380871206.........................................305

380871212.........................................305

38101K1206......................................305

38101K1212......................................305

381021206.........................................305

381021212.........................................305

381071206.........................................305

381071212.........................................305

38121K1206......................................305

38121K1212......................................305

381221206.........................................305

381221212.........................................305

381271206.........................................305

381271212.........................................305

383A.....................................................27

384A.....................................................27

386A.....................................................28

387A.....................................................28

389........................................................28

390........................................................28

391Q13 ................................................28

391Q23 ................................................28

391Q33 ................................................28

391Q43 ................................................28

391Q53 ................................................28

391Q63 ................................................28

40........................................................147

40001.................................................317

40002.................................................317

40003.................................................317

40004.................................................317

40005.................................................317

40008.................................................317

40012.................................................317

40101.................................................306

40103.................................................306

40104.................................................306

40105.................................................306

40108.................................................306

40112.................................................306

40116.................................................306

40201.................................................306

40203.................................................306

40204.................................................306

40205.................................................306

40208.................................................306

40212.................................................306

40401.................................................306

40403.................................................306

40404.................................................306

40405.................................................306

40408.................................................306

40412.................................................306

40502.................................................306

40505.................................................306

406......................................................306

40701.................................................306

40703.................................................306

40704.................................................306

40705.................................................306

40708.................................................306

40901.................................................317

40902.................................................317

40903.................................................317

40904.................................................317

40905.................................................317

40908.................................................317

40912.................................................317

41........................................................110

411......................................................141

412......................................................141

41203.................................................298

41206.................................................298

41208.................................................298

41212.................................................298

41306.................................................298

41308.................................................298

41312.................................................298

41324.................................................298

414......................................................141

415......................................................141

420......................................................138

425......................................................138

42A.....................................................110

43A.....................................................110

44..........................................................65

46201ME ...........................................284

46201MR...........................................284

46202LE.............................................284

46202LR............................................284

46202ME ...........................................284

46202MR...........................................284

46203LE.............................................284

46203LR............................................284

46203LSE..........................................284

46203LSR..........................................284

46203ME ...........................................284

46203MR...........................................284

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

321

FAX: 773 792-2129

INDEX

46204LE.............................................284

46204LR............................................284

46204ME ...........................................284

46204MR...........................................284

46206LE.............................................284

46206LFE..........................................284

46206LFR..........................................284

46206LR............................................284

46206LSE..........................................284

46206LSR..........................................284

46206ME ...........................................284

46206MP ...........................................284

46206MR...........................................284

46256LFR..........................................284

46311LDR..........................................285

46311MDR ........................................285

46311TDR.........................................285

46313LDR..........................................285

46313MDR ........................................285

46313TDR.........................................285

47202LE.............................................286

47202LR............................................286

47203LE.............................................286

47203LR............................................286

47204LCE..........................................286

47204LCR..........................................286

47204LE.............................................286

47204LR............................................286

47206LCE..........................................286

47206LCR..........................................286

47206LE.............................................286

47206LR............................................286

47215LCR..........................................286

47215LR............................................286

47217LCR..........................................286

47217LR............................................286

47221LCR..........................................286

47221LR............................................286

47227LFE..........................................286

47227LFR..........................................286

482......................................................140

482N...................................................140

482NC................................................140

483N...................................................140

483NC................................................140

49101.................................................232

49102.................................................232

49105.................................................232

49201.................................................232

49202.................................................232

49205.................................................232

49301.................................................232

49302.................................................232

49305.................................................232

49309L...............................................287

49309LS.............................................287

49312L...............................................287

49312LS.............................................287

49329L...............................................287

49329LS.............................................287

49331L...............................................287

49331LS.............................................287

50207L...............................................287

50207M..............................................287

50208L...............................................287

50209L...............................................287

50209LS.............................................287

50209M..............................................287

50209MS ...........................................287

50212L...............................................287

50212LS.............................................287

510......................................................106

512......................................................106

515......................................................106

516-090-000-301...............................178

516-090-000-302...............................178

516-120-000-101...............................178

516-120-000-102...............................178

516-290-500......................................178

516-290-590......................................178

520......................................................106

53B.....................................................109

54A.....................................................109

54B.....................................................109

55........................................................109

5501F...................................................65

5501M..................................................65

5501MF................................................65

5501MP................................................65

55HA2F................................................50

56206L1.............................................288

56206L2.............................................288

56313L1.............................................289

56313L2.............................................289

570......................................................146

57GB3F................................................49

57GB5F................................................49

57HB3F................................................50

57HB5F................................................50

57KD3M...............................................48

57NC5F................................................50

57PC3F................................................51

57PC3FS.............................................52

57PC5F................................................51

57PC5FS.............................................52

580......................................................146

581......................................................146

585......................................................146

588......................................................146

58NC3F................................................50

590......................................................146

597......................................................146

598......................................................146

59GB3F................................................49

60........................................................151

60GB4F................................................49

60HA4F................................................50

60NC4F................................................50

60PC4F................................................51

60PC4FS.............................................52

610......................................................106

612......................................................106

615......................................................106

61GB5F................................................49

61GB6F................................................49

61HA5F................................................50

61NC5F................................................50

61PC5F................................................51

61PC5FS.............................................52

61PC6F................................................51

61PC6FS.............................................52

620......................................................106

62206L...............................................290

62GB7F................................................49

62GB8F................................................49

62HB7F................................................50

62HB8F................................................50

62NC7F................................................50

62NC8F................................................50

62PC7F................................................51

62PC7FS.............................................52

62PC8F................................................51

62PC8FS.............................................52

65021K206........................................309

65021K212........................................309

65022206...........................................309

65022212...........................................309

65027206...........................................309

65027212...........................................309

65041K206........................................309

65041K212........................................309

65042206...........................................309

65042212...........................................309

65047206...........................................309

65047212...........................................309

65061K206........................................309

65061K212........................................309

65062206...........................................309

65062212...........................................309

65067206...........................................309

65067212...........................................309

65081K206........................................309

65081K212........................................309

65082206...........................................309

65082212...........................................309

65087206...........................................309

65087212...........................................309

65101K206........................................309

65101K212........................................309

65102206...........................................309

65102212...........................................309

65107206...........................................309

65107212...........................................309

65121K206........................................309

65121K212........................................309

65122206...........................................309

65122212...........................................309

65127206...........................................309

65127212...........................................309

67021K506........................................310

67021K512........................................310

67022506...........................................310

67022512...........................................310

67027506...........................................310

67027512...........................................310

67041K506........................................310

67041K512........................................310

67042506...........................................310

67042512...........................................310

67047506...........................................310

67047512...........................................310

67061K506........................................310

67061K512........................................310

67062506...........................................310

67062512...........................................310

67067506...........................................310

67067512...........................................310

67081K506........................................310

67081K512........................................310

67082506...........................................310

67082512...........................................310

67087506...........................................310

67087512...........................................310

67101K506........................................310

67101K512........................................310

67102506...........................................310

67102512...........................................310

67107506...........................................310

67107512...........................................310

67121K506........................................310

67121K512........................................310

67122506...........................................310

67122512...........................................310

67127506...........................................310

67127512...........................................310

70........................................................147

712A...................................................134

712RA................................................134

722A...................................................134

722RA................................................134

732A...................................................134

732RA................................................134

740......................................................157

745......................................................157

750......................................................157

755......................................................157

760......................................................162

760K...................................................162

761K...................................................162

765......................................................162

765K...................................................162

766K...................................................162

770......................................................157

780......................................................157

80........................................................108

820......................................................142

830......................................................108

838......................................................108

84206.................................................296

84206L...............................................296

84212.................................................296

84212L...............................................296

84306.................................................296

84306L...............................................296

84312.................................................296

84312L...............................................296

84324.................................................296

84324L...............................................296

850.............................................121, 158

851......................................................158

852......................................................158

853......................................................158

855......................................................158

856......................................................158

857......................................................158

858......................................................158

860......................................................162

865......................................................162

88........................................................108

880......................................................158

881......................................................158

882......................................................158

883......................................................158

90........................................................151

90022B06 ..........................................312

90022B12 ..........................................312

90024B06 ..........................................312

90024B12 ..........................................312

90027B06 ..........................................312

90027B12 ..........................................312

90042B06 ..........................................312

90042B12 ..........................................312

90044B06 ..........................................312

90044B12 ..........................................312

90047B06 ..........................................312

90047B12 ..........................................312

90062B06 ..........................................312

90062B12 ..........................................312

90064B06 ..........................................312

90064B12 ..........................................312

90067B06 ..........................................312

90067B12 ..........................................312

90082B06 ..........................................312

90082B12 ..........................................312

90084B06 ..........................................312

90084B12 ..........................................312

90087B06 ..........................................312

90087B12 ..........................................312

90102B06 ..........................................312

90102B12 ..........................................312

90104B06 ..........................................312

90104B12 ..........................................312

90117B06 ..........................................312

90117B12 ..........................................312

90122B06 ..........................................312

90122B12 ..........................................312

90124B06 ..........................................312

90124B12 ..........................................312

90127B06 ..........................................312

90127B12 ..........................................312

903......................................................273

903D...................................................273

9115......................................................30

9129......................................................30

* Please visit the product pages on our website for the most up-to-date product information

322

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

INDEX

913......................................................273

913D...................................................273

9144......................................................30

921.............................................245, 276

921K ..........................................245, 276

923......................................................273

923D...................................................273

9244......................................................30

933......................................................273

933D...................................................273

951......................................................273

952......................................................273

953......................................................273

961......................................................273

962......................................................273

963......................................................273

97GV***..............................................244

982A01R............................................269

982A03R............................................269

982A06R............................................269

99GD0726.........................................244

99GV***..............................................244

A1600.................................................212

A1632B..............................................212

A1634B..............................................212

A3F......................................................4-5

A3F01.....................................................5

A3F02.....................................................5

A3F03.....................................................5

A3F04.....................................................5

A3F05.....................................................5

A3F06.....................................................5

A3F07.....................................................5

A3F08.....................................................5

A3F09.....................................................5

A3FB.......................................................4

A3FBAU .................................................4

A3FD......................................................4

A3FL.......................................................4

A3FS.......................................................4

A3M.....................................................4-5

A3M01....................................................5

A3M02....................................................5

A3M03....................................................5

A3M04....................................................5

A3M05....................................................5

A3M06....................................................5

A3M07....................................................5

A3M08....................................................5

A3M09....................................................5

A3MB......................................................4

A3MBAU ................................................4

A3ML......................................................4

A3MS......................................................4

A4F.........................................................4

A4FB.......................................................4

A4FBAU .................................................4

A4FD......................................................4

A4FL.......................................................4

A4M........................................................4

A4MB......................................................4

A4MBAU ................................................4

A4ML......................................................4

A591...................................................317

A592...................................................317

A593...................................................317

A594...................................................317

A595...................................................317

A596...................................................317

A598...................................................317

A5F.........................................................4

A5FB.......................................................4

A5FBAU .................................................4

A5FD......................................................4

A5FL.......................................................4

A5M........................................................4

A5MB......................................................4

A5MBAU ................................................4

A5ML......................................................4

A6501.................................................312

A6502.................................................312

A6503.................................................312

A6504.................................................312

A6505.................................................312

A6508.................................................312

A6F.........................................................4

A6FB.......................................................4

A6FBAU .................................................4

A6M........................................................4

A6MBAU ................................................4

A7F.........................................................4

A7FB.......................................................4

A7FBAU .................................................4

A7M........................................................4

A7MBAU ................................................4

AA3F.......................................................4

AA3FB....................................................4

AA3FBAU...............................................4

AA3FD....................................................4

AA3FL ....................................................4

AA3FLD..................................................4

AA3M......................................................4

AA3MB...................................................4

AA3MBAU..............................................4

AA3ML....................................................4

AA4F.......................................................4

AA4FB....................................................4

AA4FD....................................................4

AA4FL ....................................................4

AA4M......................................................4

AA4ML....................................................4

AA5F.......................................................4

AA5FB....................................................4

AA5FD....................................................4

AA5FL ....................................................4

AA5M......................................................4

AA5MB...................................................4

AA5ML....................................................4

AA6F.......................................................4

AA6FB....................................................4

AA6FD....................................................4

AA6FL ....................................................4

AA6M......................................................4

AA6ML....................................................4

AA7F.......................................................4

AA7FB....................................................4

AA7FD....................................................4

AA7FL ....................................................4

AA7M......................................................4

AA7ML....................................................4

AAA*F.....................................................6

AAA*M....................................................6

AD1600..............................................212

AD1632B ...........................................212

AD1634..............................................212

AQGP322...............................................4

AQGP323...............................................4

B1600.................................................212

B1632B..............................................212

B1634B..............................................212

B1650.................................................212

B1700.................................................212

B1795.................................................212

B1796.................................................212

B3F.......................................................10

B3FB ....................................................10

B3M......................................................10

B3MB....................................................10

B4F.......................................................10

B4M......................................................10

B5F.......................................................10

B5M......................................................10

B6F.......................................................10

B6M......................................................10

B7F.......................................................10

B7M......................................................10

BD1600..............................................212

BD1632B ...........................................212

BD1634B ...........................................212

BD1650..............................................212

BD1700..............................................212

BD1795..............................................212

BD1796..............................................212

BPJF01..............................................123

BPJF01AU.........................................123

BPJF02..............................................123

BPJF02AU.........................................123

BPJF03..............................................123

BPJF03AU.........................................123

BPJF04..............................................123

BPJF04AU.........................................123

BPJF05..............................................123

BPJF05AU.........................................123

BPJF06..............................................123

BPJF06AU.........................................123

BPJJ01...............................................123

BPJJ01AU .........................................123

BPJJ02...............................................123

BPJJ02AU .........................................123

BPJJ03...............................................123

BPJJ03AU .........................................123

BPJJ04...............................................123

BPJJ04AU .........................................123

BPJJ05...............................................123

BPJJ05AU .........................................123

BPJJ06...............................................123

BPJJ06AU .........................................123

BPJR01..............................................123

BPJR01AU.........................................123

BPJR02..............................................123

BPJR02AU.........................................123

BPJR03..............................................123

BPJR03AU.........................................123

BPJR04..............................................123

BPJR04AU.........................................123

BPJR05..............................................123

BPJR05AU.........................................123

BPJR06..............................................123

BPJR06AU.........................................123

BXR011..............................................272

BXR0110 ...........................................272

BXR011PC........................................272

BXR013..............................................272

BXR013P...........................................272

BXR016..............................................272

BXR016P...........................................272

BXR021..............................................272

BXR0210 ...........................................272

BXR021PC........................................272

BXR023..............................................272

BXR023P...........................................272

BXR026..............................................272

BXR026PC........................................272

BXR03................................................272

BXR0310 ...........................................272

BXR0310PC......................................272

BXR031PC........................................272

BXR033..............................................272

BXR033PC........................................272

BXR036..............................................272

BXR036PC........................................272

BXR051..............................................272

BXR0510 ...........................................272

BXR051PC........................................272

BXR053..............................................272

BXR053PC........................................272

BXR056..............................................272

BXR056PC........................................272

C11.......................................................94

C12A ....................................................94

C12B ....................................................94

C1600.................................................212

C1634B..............................................212

C240...................................................145

C245...................................................145

C270...................................................145

C3F.......................................................10

C3M......................................................10

C46203LR..........................................284

C46204MR ........................................284

C46206LFR.......................................284

C46206LR..........................................284

C4F.......................................................10

C4M......................................................10

C55B..................................................109

C56206L1..........................................288

C56206L2..........................................288

C56313L1..........................................289

C56313L2..........................................289

C5F.......................................................10

C5M......................................................10

C62206L............................................290

C63212L............................................290

C6F.......................................................10

C6M......................................................10

C7F.......................................................10

C7M......................................................10

CB3F....................................................65

CB3M...................................................65

CD1600..............................................212

CD1634B...........................................212

CMT331...............................................83

CMT332...............................................83

CMT332A.............................................83

CMT332B.............................................83

CMT332C ............................................84

CMT333...............................................83

CMT333A.............................................83

CMT333B.............................................84

CMT334-B ...........................................83

CMT334A.............................................83

CMT334C ............................................83

CMT334E.............................................83

CMT334F.............................................83

CMT335...............................................83

CMT335A.............................................84

CMT336...............................................83

CMT336A.............................................83

CMT336B.............................................83

CMT336C ............................................83

CMT336D ............................................83

CMT336E.............................................83

CMT337...............................................83

CMT338...............................................83

CMT339...............................................83

CMT341...............................................84

CMT342B.............................................84

CMT344B.............................................84

CMT346...............................................83

CMT346C ............................................84

CMT351C ............................................83

CMT354F.............................................83

CMT356C ............................................83

CMT358...............................................83

CMT359...............................................83

CN11..................................................109

CN12A ...............................................109

CN12B ...............................................109

CN13B ...............................................109

CPC102A...........................................263

CPC102D...........................................263

CPC102F...........................................263

CPC102K...........................................263

CPC102N...........................................263

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

323

FAX: 773 792-2129

INDEX

CPC102R...........................................263

CPC102T...........................................263

CPC102U...........................................263

D1600.................................................212

D1632A..............................................212

D1632B..............................................212

D1634B..............................................212

D1700.................................................212

D1789.................................................212

D3F.........................................................9

D3FB......................................................9

D3FBAU.................................................9

D3FD......................................................9

D3FDB....................................................9

D3M........................................................9

D3MB .....................................................9

D3MBAU................................................9

D4F.........................................................9

D4FB......................................................9

D4FBAU.................................................9

D4M........................................................9

D4MB .....................................................9

D4MBAU................................................9

D5F.........................................................9

D5FB......................................................9

D5FBAU.................................................9

D5M........................................................9

D5MB .....................................................9

D5MBAU................................................9

D6F.........................................................9

D6FB......................................................9

D6FBAU.................................................9

D6FDB....................................................9

D6M........................................................9

D6MB .....................................................9

D6MBAU................................................9

D7F.........................................................9

D7FB......................................................9

D7FBAU.................................................9

D7M........................................................9

D7MB .....................................................9

D7MBAU................................................9

DA013................................................275

DA023................................................275

DA033................................................275

DA043................................................275

DA053................................................275

DA083................................................275

DMD*FRA***........................................53

DS301................................................236

DS302................................................236

DS303................................................236

DS306................................................236

DS307................................................236

DS308................................................236

DS311................................................237

DS312................................................237

DS313................................................237

DS316................................................236

DS317................................................236

DS318................................................236

DS321................................................238

DS322................................................238

DS323................................................238

DS350................................................238

DS351................................................238

DS352................................................238

DS353................................................238

DUSB...................................................56

DW05.................................................311

DW1 ...................................................311

DW101...............................................311

DW102...............................................311

DW201...............................................311

DW202...............................................311

DW205...............................................311

DW3 ...................................................311

DW301...............................................310

DW302...............................................310

DW303...............................................310

DW304...............................................310

DW305...............................................310

DW308...............................................310

DW312...............................................310

DW313...............................................310

DW316...............................................310

DW4 ...................................................311

DW41.................................................310

DW43.................................................310

DW44.................................................310

DW45.................................................310

DW47.................................................310

DW48.................................................310

DW7 ...................................................311

E*F........................................................12

E*M.......................................................12

E111L.................................................107

E112BL..............................................107

E591...................................................317

E592...................................................317

E594...................................................317

E595...................................................317

E596...................................................317

E598...................................................317

E903...................................................276

E903D................................................276

E913...................................................276

E913D................................................276

EAC225................................................71

EAC227................................................70

EAC233................................................70

EAC233S.............................................70

EAC305................................................70

EAC309................................................70

EAC311................................................70

EAC315................................................70

EAC319................................................70

EAC323................................................70

EAC325................................................70

EAC327................................................70

EAC333................................................70

EAC333S.............................................70

EAC405................................................70

EAC409................................................70

EAC411................................................70

EAC413................................................70

EAC451................................................70

EAC453................................................70

EAC455................................................70

EAC457................................................70

ED903................................................276

ED903D.............................................276

ED913................................................276

ED913D.............................................276

EH13942..............................................16

EHBNC2..............................................16

EHBNCSC...........................................16

EHCAT62.............................................16

EHRCA2..............................................16

EHRCABNC........................................16

EHUSB2...............................................16

EN3C**.................................................43

EN3CR.................................................42

EN3CRAUTO ......................................42

EN3I**...................................................45

EN3INS16............................................42

EN3INS20............................................42

EN3P**.................................................44

EN3POS16..........................................42

EN3POS20..........................................42

EP903 ................................................276

EP903D..............................................276

EP913 ................................................276

EP913D..............................................276

EPS1PC1...........................................291

EPS1PC2...........................................291

EPS1PC3...........................................291

EPS1SL1...........................................291

EPS2PC1...........................................291

EPS2PC2...........................................291

EPS2PC3...........................................291

EPS3PC1...........................................291

EPS3PC2...........................................291

EPS3PC3...........................................291

EPS3SL1...........................................291

EPS4PC1...........................................291

EPS4PC2...........................................291

EPS4PC3...........................................291

F3FRAF ...............................................23

F3FSTF................................................23

F3MRAF...............................................23

F3SM3F...............................................23

FA11.....................................................94

FAL11...................................................94

G3MS...................................................26

G4MS...................................................26

G6083 ................................................296

G6084 ................................................296

H101...................................................275

H101PC.............................................275

H102...................................................275

H102PC.............................................275

H103...................................................275

H103D................................................275

H103PC.............................................275

H201...................................................275

H201PC.............................................275

H202...................................................275

H202PC.............................................275

H203...................................................275

H203D................................................275

H203PC.............................................275

H3MS...................................................26

H4MS...................................................26

HP75BNC1..........................................66

HP75BNC10........................................66

HP75BNC12........................................66

HP75BNC2..........................................66

HP75BNC6..........................................66

HP75BNC7..........................................66

HP75BNC9..........................................66

HPCC4F...............................................38

HPCC4FRA.........................................38

HPCI4F ................................................38

HPCP*4................................................40

HPCPK112F......................................190

HPCPK112F1....................................190

HPCPK1B..........................................190

HPCPK324F......................................190

HPCPK324F1....................................190

HPCPK3B..........................................190

IBS10B02106AR...............................314

IBS10B04106AR...............................314

IBS10B06106AR...............................314

IBS10B08106AR...............................314

IBS10B10106AR...............................314

IBS10B12106AR...............................314

IBS15B02106AR...............................314

IBS15B04106AR...............................314

IBS15B06106AR...............................314

IBS15B08106AR...............................314

IBS15B10106AR...............................314

IBS15B12106AR...............................314

IBS20B02106AR...............................314

IBS20B04106AR...............................314

IBS20B06106AR...............................314

IBS20B08106AR...............................314

IBS20B10106AR...............................314

IBS20B12106AR...............................314

J3FS.....................................................26

J4MS....................................................26

JP012000...........................................207

JP012S32A........................................207

JP012S32B1 .....................................207

JP012S34B1 .....................................207

JP022000...........................................207

JP022S32A........................................207

JP022S32B........................................207

JP022S34B........................................207

JP032000...........................................207

JP032S32A........................................207

JP032S32B........................................207

JP032S34B........................................207

JP042000...........................................207

JP042S32A........................................207

JP042S32B........................................207

JP042S34B........................................207

JP052000...........................................207

JP052S32A........................................207

JP052S32B........................................207

JP052S34B........................................207

JP062000...........................................207

JP062S32A........................................207

JP062S32B........................................207

JP062S34B........................................207

JP072000...........................................207

JP072S32A........................................207

JP072S32B........................................207

JP072S34B........................................207

JP082000...........................................207

JP082S32A........................................207

JP082S32B........................................207

JP082S34B........................................207

JP092000...........................................207

JP092S32A........................................207

JP092S32B........................................207

JP092S34B........................................207

JP102000...........................................207

JP102S32A........................................207

JP102S32B........................................207

JP102S34B........................................207

JP112000...........................................207

JP112S32A........................................207

JP112S32B........................................207

JP112S34B........................................207

JP122000...........................................207

JP122S32A........................................207

JP122S32B........................................207

JP122S34B........................................207

JP312000...........................................210

JP322000...........................................210

JP9902...............................................207

JP9922...............................................207

JP9942...............................................207

JPD312000........................................210

JPD322000........................................210

K131...................................................296

K255.......................................................5

K3FS ....................................................26

K459...................................................163

K460...................................................163

K4FS ....................................................26

L11........................................................94

L112A...................................................98

L112APC..............................................98

L112B...................................................98

L113B...................................................98

L114B...................................................98

L114BPC..............................................98

L12A.....................................................94

L12B.....................................................94

L3MN....................................................30

L4MN....................................................30

L5MN....................................................30

* Please visit the product pages on our website for the most up-to-date product information

324

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

INDEX

L712A.................................................134

L712RA..............................................134

L722A.................................................134

L722RA..............................................134

LUS001..............................................271

LUS001PC.........................................271

LUS001ST.........................................271

M111 ....................................................97

M112A..................................................97

M112APC ............................................97

M112B..................................................97

M112BPC ............................................97

M113B..................................................97

M113E..................................................97

M113PPC1M.......................................97

M114B..................................................97

M114BPC ............................................97

M114BPC1M.......................................97

M3M .....................................................30

M4M .....................................................30

M5M .....................................................30

MBPK175T........................................201

MD10..................................................249

MD15..................................................249

MD3....................................................249

MD6....................................................249

MDPC2A............................................121

MDPC2AR.........................................121

MDPC2ARA......................................121

MDSL2A ............................................121

MDSL2ARA.......................................121

MDSMT2ARATR...............................120

MDSMT2BRATR...............................120

MDSMT3BRATR...............................120

MDSMT4BRATR...............................120

ML112B................................................97

MN111..................................................97

MN112A...............................................97

MN112APC..........................................97

MN112B...............................................97

MN112BPC..........................................97

MN113B...............................................97

MN113BPC..........................................97

MN113E...............................................97

MN114B...............................................97

MN114BPC..........................................97

MN122A...............................................97

MNL112B.............................................97

MNL113B.............................................97

MT331..................................................83

MT332..................................................83

MT332A ...............................................83

MT332B ...............................................83

MT332C...............................................83

MT333..................................................83

MT333A ...............................................84

MT333B ...............................................83

MT333E ...............................................83

MT334A ...............................................83

MT334B ...............................................83

MT334C...............................................83

MT334E ...............................................83

MT334F................................................83

MT335..................................................83

MT335A ...............................................84

MT336..................................................83

MT336A ...............................................83

MT336B ...............................................83

MT336C...............................................83

MT336D...............................................83

MT336E ...............................................83

MT337..................................................83

MT338..................................................83

MT339..................................................83

MT342B ...............................................83

MT343B ...............................................84

MT344B ...............................................83

MT346..................................................83

MT346A ...............................................84

MT346B ...............................................84

MT346C...............................................84

MT352A ...............................................83

MT354B ...............................................83

MT355..................................................83

MT356C...............................................83

MT357..................................................83

MT388..................................................85

MT389..................................................85

MT48FN.............................................184

MT48HN ............................................184

MT48K1FN........................................182

MT48K1HN........................................182

MT48K1NN........................................182

MT48K1NS........................................182

MT48K3FN........................................182

MT48K3HN........................................182

MT48K3NN........................................182

MT48NN ............................................184

MT48NS.............................................184

MT52FN.............................................184

MT52HN ............................................184

MT52K1FN........................................182

MT52K1HN........................................182

MT52K1NN........................................182

MT52K1NS........................................182

MT52K3FN........................................182

MT52K3HN........................................182

MT52K3NN........................................182

MT52NN ............................................184

MT52NS.............................................184

MTP24K7...........................................174

MTP48K1NO.....................................166

MTP48K1NS.....................................166

MTP48K3BPNS................................174

MTP48K3NO.....................................166

MTP48K3NS.....................................166

MTP48K3PBNO................................174

MTP48K3SNO..................................166

MTP52K3BPNO................................174

MTPFA48K1NO ................................164

MTPFA48K1NS.................................164

MTPH48K1NO..................................171

MTPH48K1NS...................................171

MTPH48K3NO..................................171

MTPH48K3NS...................................171

MTPH48K3SNO ...............................171

MVJ*75T............................................137

MVJ*NT..............................................137

MVP32K1*75T ..................................196

MVP32K1*NT....................................196

MVP32K3*75T ..................................196

MVP32K3*NT....................................196

N111.....................................................98

N111PC ...............................................98

N111PCS...........................................100

N112A..................................................98

N112APC.............................................98

N112APCS........................................100

N112B..................................................98

N112BPC.............................................98

N112BPCS........................................100

N113.....................................................98

N113B..................................................98

N113BPC.............................................98

N113BPCS........................................100

N114B..................................................98

N114BPC.............................................98

N114BPCS........................................100

N3MS...................................................25

NL111...................................................98

NL112A................................................98

NL112B................................................98

NL113B................................................98

NL114B................................................98

NL114BPC...........................................98

NL114BPCS......................................100

P2290.................................................230

P2315.................................................230

P2316.................................................230

P23491...............................................271

P234913.............................................271

P23492...............................................271

P23493...............................................271

P23494...............................................271

P23495...............................................271

P23497...............................................271

P23498...............................................271

P2456.................................................230

P286301...............................................91

P286302...............................................91

P286304...............................................91

P286305...............................................91

P286307...............................................91

P286308...............................................91

P286401...............................................91

P286402...............................................91

P286404...............................................91

P286405...............................................91

P286407...............................................91

P286408...............................................91

P2912.................................................297

P2936........................................270, 314

P2937........................................270, 314

P2938........................................270, 314

P2939........................................270, 314

P2940........................................270, 314

P2941........................................270, 314

P2942........................................270, 314

P2943........................................270, 314

P2951........................................270, 314

P2952........................................270, 314

P2953........................................270, 314

P2954........................................270, 314

P2955........................................270, 314

P2956........................................270, 314

P2957........................................270, 314

P2958........................................270, 314

P2979.................................................314

P2992.................................................314

P3F.........................................................8

P3M........................................................8

P4F.........................................................8

P4M........................................................8

P5F.........................................................8

P5M........................................................8

PC12A..................................................94

PC142A..............................................110

PC712A..............................................134

PC722A..............................................134

PC732A..............................................134

PCL712A ...........................................134

PCL722A ...........................................134

PD3F***................................................20

PD3M***...............................................20

PJRAN1X1U01.................................126

PJRAN1X1U02.................................126

PJRAN1X1U03.................................126

PJRAN1X1U04.................................126

PJRAN2X1U01.................................126

PJRAN2X1U02.................................126

PJRAN3X1U01.................................126

PJRAN3X1U02.................................126

PJRAS1X1S01..................................126

PJRAS1X1S02..................................126

PJRAS1X1S03..................................126

PJRAS1X1S04..................................126

PJRAS1X2S01..................................126

PJRAS1X2S02..................................126

PJRAS1X3S01..................................126

PJRAS1X3S02..................................126

PJRAS1X3U01..................................126

PJRAS2X1S01..................................126

PJRAS2X1S02..................................126

PJRAS2X2S01..................................126

PJRAS3X1S01..................................126

PJRAS3X1S02..................................126

PJRAS3X2S01..................................126

PJRAS3X2S02..................................126

PJRAS4X2U01..................................126

PL102.................................................278

PL103205 ..........................................277

PL103705 ..........................................277

PL106205 ..........................................277

PL106705 ..........................................277

PL111.................................................278

PL112205 ..........................................277

PL112705 ..........................................277

PL123705 ..........................................277

PL126205 ..........................................277

PL126705 ..........................................277

PL202.................................................278

PL203205 ..........................................277

PL203705 ..........................................277

PL206205 ..........................................277

PL206705 ..........................................277

PL211.................................................278

PL212205 ..........................................277

PL212705 ..........................................277

PL226205 ..........................................277

PL226705 ..........................................277

PL303.................................................278

PL305.................................................278

PL308.................................................278

PL403205 ..........................................277

PL403705 ..........................................277

PL406205 ..........................................277

PL406705 ..........................................277

PL412205 ..........................................277

PL412705 ..........................................277

PL501.................................................278

PL503.................................................278

PL503205 ..........................................277

PL504.................................................278

PL505.................................................278

PL506205 ..........................................277

PL506705 ..........................................277

PL508.................................................278

PL512.................................................278

PL512205 ..........................................277

PL512705 ..........................................277

PL513.................................................278

PL703705 ..........................................277

PL706205 ..........................................277

PL706705 ..........................................277

PL712205 ..........................................277

PL712705 ..........................................277

PL803205 ..........................................277

PL803705 ..........................................277

PL806205 ..........................................277

PL806705 ..........................................277

PL812205 ..........................................277

PL812705 ..........................................277

PL9105...............................................278

PL9205...............................................278

PPT ....................................................163

PQG3F***.............................................18

PQG3M***............................................18

PT1LA................................................163

PT2B..................................................163

QG3F....................................................25

QG3FD.................................................25

QG3FDPC...........................................25

QG3M...................................................25

QG4F....................................................25

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

325

FAX: 773 792-2129

INDEX

QG4FD.................................................25

QG4M...................................................25

QG5F....................................................25

QG5FD.................................................25

QG5M...................................................25

QG6F....................................................25

QG6FD.................................................25

QG6M...................................................25

QG7F....................................................25

QG7FD.................................................25

QG7M...................................................25

QGP322.................................................4

QGP323.................................................4

QGP326...............................................10

QGP327...............................................10

QGP362.................................................9

QGP363.................................................9

QGPK116FB.....................................188

QGPK116MB ....................................188

QGPK18M8FB..................................188

QGPK1B............................................188

QGPK332MFB..................................188

QGPK3B............................................188

R3FZ.......................................................8

R3MZ......................................................8

R4FZ.......................................................8

R4MZ......................................................8

R5FZ.......................................................8

R5MZ......................................................8

R6FZ.......................................................8

R6MZ......................................................8

R7FZ.......................................................8

R7MZ......................................................8

RA200................................................256

RA202................................................257

RA205................................................256

RA207................................................257

RA208................................................257

RA217................................................257

RA35..................................................255

RA353................................................247

RA354................................................247

RA355................................................247

RA356.........................................246-247

RA357................................................247

RA358................................................247

RA359................................................247

RA373................................................247

RA374.........................................246-247

RA375................................................247

RA376................................................247

RA377................................................247

RA378................................................247

RA379................................................247

RA40..................................................255

RA41..................................................255

RA49B11 ...........................................103

RA49B12A.........................................103

RA49B12B.........................................103

RA49B14B.........................................103

RA49C11...........................................103

RA49C12A.........................................103

RA49C12B.........................................103

RA49C14B.........................................103

RA700................................................254

RA70B11 ...........................................103

RA70B12A.........................................103

RA70B12B.........................................103

RA70B14B.........................................103

RA70C11...........................................103

RA70C12A.........................................103

RA70C12B.........................................103

RA70C14B.........................................103

RA710................................................254

RA712A..............................................241

RA722A..............................................241

RA760................................................241

RA765................................................241

RA850................................................253

RAPC322.............................................78

RAPC712...........................................130

RAPC722...........................................130

RAPC732...........................................130

RAPC732OF.....................................130

RAPC742...........................................130

RAPC742OF.....................................130

RAPC752...........................................130

RAPC752S........................................130

RASH712...........................................130

RASH722...........................................130

RASH732...........................................130

RASM712..........................................130

RASM722..........................................130

RASM732..........................................130

RASM742TR.....................................130

RASM752STR...................................130

RASM752TR.....................................130

RN111PC...........................................103

RN112APC........................................103

RN112BPC........................................103

RN113BPC........................................103

RN113FPC........................................103

RN114BPC........................................103

RS422H48N081................................191

RS422H4N081..................................192

RS422H4N161..................................191

RS422H4N162..........................191-192

RS422H4N242..........................191-192

RS422PH4N081........................191-192

RS422PH4N161 ...............................191

RS422PH4N162........................191-192

RS422PH4N242........................191-192

RS422PV4N081........................191-192

RS422PV4N161................................191

RS422PV4N162........................191-192

RS422PV4N242........................191-192

RS422PV4N322........................191-192

RS422V4N081...........................191-192

RS422V4N161..................................191

RS422V4N162...........................191-192

RS422V4N242...........................191-192

RS422V4N322...........................191-192

RTT34B01............................................91

RTT34B02............................................91

RTT34B04............................................91

RTT34B05............................................91

RTT34B07............................................91

RTT34B08............................................91

RTT8701..............................................91

RTT8702..............................................91

RTT8704..............................................91

RTT8705..............................................91

RTT8707..............................................91

RTT8708..............................................91

S11.......................................................94

S112BPC.............................................98

S112BPCS ........................................100

S12A.....................................................94

S12B.....................................................94

S13B.....................................................94

S230...................................................153

S250...................................................151

S260...................................................151

S267...................................................151

S280 ..........................................146, 151

S3F5M..................................................29

S3FM....................................................28

S4FM....................................................28

S580...................................................146

S5F3M..................................................29

S5FM....................................................28

S760...................................................162

S760K ................................................162

S761K ................................................162

S765...................................................162

S765K ................................................162

S766K ................................................162

S830...................................................108

SL01.....................................................61

SL02.....................................................61

SL03.....................................................61

SL04.....................................................61

SL05................................................61-62

SL102F.................................................63

SL102M................................................63

SL103F.................................................63

SL103M................................................63

SL104F.................................................63

SL104M................................................63

SL105F.................................................63

SL105M................................................63

SL172F.................................................63

SL173F.................................................63

SL173M................................................63

SL174F.................................................63

SL174M................................................63

SL175F.................................................63

SL175M................................................63

SL18.....................................................64

SL182F.................................................64

SL182M................................................64

SL183F.................................................64

SL183M................................................64

SL184F.................................................64

SL184M................................................64

SL185F.................................................64

SL185M................................................64

SL402F.................................................62

SL402M................................................62

SL403F.................................................62

SL403M................................................62

SL404F.................................................62

SL404M................................................62

SL405F.................................................62

SL405M................................................62

SL412F.................................................62

SL413F.................................................62

SL413M................................................62

SL414F.................................................62

SL414M................................................62

SL415F.................................................62

SL415M................................................62

SMD*FRA***........................................53

SN37A11 ...........................................103

SN37A12A.........................................103

SN37A12B.........................................103

SN37A14B.........................................103

SN49A11 ...........................................103

SN49A12A.........................................103

SN49A12B.........................................103

SN49A14B.........................................103

SN49B11 ...........................................103

SN49B12A.........................................103

SN49B12B.........................................103

SN49B14B.........................................103

SN49C11...........................................103

SN49C12A.........................................103

SN49C12B.........................................103

SN49C14B.........................................103

SN70B11 ...........................................103

SN70B12A.........................................103

SN70B12B.........................................103

SN70B14B.........................................103

SN70C11...........................................103

SN70C12A.........................................103

SN70C12B.........................................103

SN70C14B.........................................103

SR00.......................................................5

SR01.......................................................5

SR02.......................................................5

SR03.......................................................5

SR04.......................................................5

SR05.......................................................5

SR06.......................................................5

SR07.......................................................5

SR08.......................................................5

SR09.......................................................5

ST121.................................................257

ST125.................................................256

ST131.................................................257

ST200.................................................257

ST230.................................................257

ST303.................................................247

ST304.................................................247

ST305.................................................247

ST306.................................................247

ST307.........................................246-247

ST308.................................................247

ST309.................................................247

ST323.................................................247

ST324.........................................246-247

ST325.................................................247

ST326.................................................247

ST327.................................................247

ST328.................................................247

ST329.................................................247

ST35...................................................255

ST40...................................................255

ST60...................................................255

ST600.................................................250

ST603.................................................250

ST604.................................................250

ST605.................................................250

ST626.................................................250

ST700.................................................254

ST710.................................................254

ST740.................................................254

ST750.................................................254

ST760.................................................241

ST765.................................................241

ST850.................................................253

ST90...................................................258

ST900.................................................245

ST900F..............................................245

ST91...................................................258

SUSB....................................................56

T127410.............................................297

T12742...............................................297

T12745...............................................297

T3F .........................................................9

T3FL.......................................................9

T3FLM....................................................9

T3FM......................................................9

T4F .........................................................9

T4FL.......................................................9

T4FLM....................................................9

T4FM......................................................9

TA01 .....................................................31

TA02 .....................................................31

TA03 .....................................................31

TA04 .....................................................31

TA05 .....................................................31

TA06 .....................................................31

TA3F................................................31-32

TA3FB...................................................32

TA3FL...................................................32

TA3FLB ................................................32

TA3M...............................................31-32

TA3MB..................................................32

TA3ML..................................................32

TA4F.....................................................32

TA4FB...................................................32

TA4FL...................................................32

TA4FLB ................................................32

* Please visit the product pages on our website for the most up-to-date product information

326

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

INDEX

TA4M....................................................32

TA4MB..................................................32

TA4ML..................................................32

TA5F.....................................................32

TA5FL...................................................32

TA5FLB ................................................32

TA5M....................................................32

TA5ML..................................................32

TA5MLB................................................32

TA6FL...................................................32

TA6ML..................................................32

TA7FL...................................................32

TA7ML..................................................32

TA8FL...................................................32

TA8ML..................................................32

TAD2...................................................142

TAD3...................................................142

TB3M....................................................33

TB3MB.................................................33

TB4M....................................................33

TB4MB.................................................33

TB5M....................................................33

TB5MB.................................................33

TB6M....................................................33

TB7M....................................................33

TB8M....................................................33

TBA03..................................................37

TBA04..................................................37

TBA05..................................................37

TBA06..................................................37

TLP4.....................................................33

TLP6.....................................................33

TQG3F.................................................37

TQG3M................................................37

TQG4F.................................................37

TQG4M................................................37

TQG5F.................................................37

TQG5M................................................37

TQG6F.................................................37

TQG6M................................................37

TR1PC...............................................121

TR2A..................................................121

TRA**M................................................34

TRA3M.................................................34

TRA6M.................................................34

TRA6MF...............................................34

TRG4M ................................................33

TRGS4F...............................................33

TT**....................................................267

TT101.................................................265

TT102.................................................265

TT103.................................................265

TT104.................................................265

TT105.................................................265

TT106.................................................265

TT107.................................................265

TT108.................................................265

TT109.................................................265

TT110.................................................265

TT111.................................................265

TT112.................................................265

TT113.................................................265

TT114.................................................265

TT115.................................................265

TT121.................................................265

TT122.................................................265

TT123.................................................265

TT124.................................................265

TT125.................................................265

TT126.................................................265

TT127.................................................265

TT128.................................................265

TT129.................................................265

TT130.................................................265

TT131.................................................265

TT132.................................................265

TT133.................................................265

TT134.................................................265

TT135.................................................265

TT141.................................................265

TT142.................................................265

TT143.................................................265

TT144.................................................265

TT145.................................................265

TT146.................................................265

TT147.................................................265

TT148.................................................265

TT149.................................................265

TT150.................................................265

TT151.................................................265

TT152.................................................265

TT153.................................................265

TT154.................................................265

TT155.................................................265

TT161.................................................265

TT162.................................................265

TT163.................................................265

TT164.................................................265

TT165.................................................265

TT166.................................................265

TT167.................................................265

TT168.................................................265

TT169.................................................265

TT170.................................................265

TT171.................................................265

TT172.................................................265

TT173.................................................265

TT174.................................................265

TT175.................................................265

TT201.................................................234

TT202.................................................234

TT203.................................................234

TT204.................................................234

TT205.................................................234

TT206.................................................234

TT207.................................................234

TT208.................................................234

TT209.................................................234

TT210.................................................234

TT251.................................................143

TT252.................................................143

TT253 ..........................................90, 143

TT253N..............................................143

TT253NC...........................................143

TT254.................................................143

TT254N..............................................143

TT254NC...........................................143

TT261.................................................144

TT263 ..........................................90, 144

TT281.................................................265

TT282.................................................265

TT283.................................................265

TT284.................................................265

TT289.................................................265

TT2W48MCF1...................................223

TT2W48MCN1..................................223

TT2W48VCF1...................................223

TT2W48VCN1...................................223

TT30.....................................................87

TT30FM ...............................................87

TT31.....................................................87

TT31DC ...............................................87

TT31FM ...............................................87

TT31FMDC..........................................87

TT32A...................................................87

TT32ADC.............................................87

TT32AFM.............................................87

TT32AFMDC.......................................87

TT32B...................................................87

TT32BDC.............................................87

TT32BFM.............................................87

TT32BFMDC.......................................87

TT32C..................................................87

TT32CDC.............................................87

TT32CFM.............................................87

TT32CFMDC.......................................87

TT33.....................................................87

TT33B...................................................87

TT33BDC.............................................87

TT33BFM.............................................87

TT33BFMDC.......................................87

TT33DC ...............................................87

TT33FM ...............................................87

TT33FMDC..........................................87

TT34A...................................................87

TT34ADC.............................................87

TT34AFM.............................................87

TT34AFMDC.......................................87

TT34B...................................................87

TT34BDC.............................................87

TT34BFM.............................................87

TT34BFMDC.......................................87

TT34C..................................................87

TT34CDC.............................................87

TT34CFM.............................................87

TT34CFMDC.......................................87

TT34F...................................................87

TT34FDC.............................................87

TT35.....................................................87

TT35DC ...............................................87

TT35FM ...............................................87

TT35FMDC..........................................87

TT36.....................................................87

TT36A...................................................87

TT36ADC.............................................87

TT36AFM.............................................87

TT36AFMDC.......................................87

TT36B...................................................87

TT36BDC.............................................87

TT36C..................................................87

TT36CDC.............................................87

TT36CFM.............................................87

TT36CFMDC.......................................87

TT36DC ...............................................87

TT36FM ...............................................87

TT36FMDC..........................................87

TT401.................................................230

TT403.................................................230

TT404.................................................230

TT405.................................................230

TT408.................................................230

TT413.................................................230

TT4506...............................................230

TT45106.............................................230

TT45124.............................................230

TT45148.............................................230

TT45206.............................................230

TT45224.............................................230

TT45248.............................................230

TT45306.............................................230

TT45324.............................................230

TT45348.............................................230

TT45406.............................................230

TT45424.............................................230

TT45448.............................................230

TT45524.............................................230

TT45548.............................................230

TT45806.............................................230

TT45824.............................................230

TT45848.............................................230

TT4W24MCF1...................................223

TT4W24MCN1..................................223

TT4W24VCF1...................................223

TT4W24VCN1...................................223

TT501.................................................236

TT502.................................................236

TT503.................................................236

TT504.................................................236

TT505.................................................212

TT506.................................................212

TT507.................................................212

TT508.................................................212

TT509.................................................212

TT51 ..........................................215, 218

TT510........................................230, 234

TT5102000........................................217

TT5102S31........................................217

TT5102S32A.....................................217

TT5102S32B.....................................217

TT5102S33B.....................................217

TT5102S34B.....................................217

TT5102W31.......................................217

TT5102W32A....................................217

TT5102W32B....................................217

TT5102W33B....................................217

TT5102W34B....................................217

TT511.................................................212

TT5121...............................................233

TT5122...............................................233

TT5123...............................................233

TT5124...............................................233

TT5125...............................................233

TT5128...............................................233

TT5131...............................................233

TT5132...............................................233

TT5133...............................................233

TT5134...............................................233

TT5135...............................................233

TT5138...............................................233

TT5141...............................................233

TT5142...............................................233

TT5143...............................................233

TT5144...............................................233

TT5145...............................................233

TT5148...............................................233

TT5151...............................................234

TT5152...............................................234

TT5155...............................................234

TT516.................................................237

TT517.................................................237

TT518.................................................237

TT519.................................................236

TT52...................................................218

TT520.................................................236

TT5202000........................................217

TT5202S31........................................217

TT5202W34B....................................217

TT521.................................................236

TT53 ..........................................215, 220

TT5302000........................................219

TT5302S95........................................219

TT5302S96........................................219

TT5302W95.......................................219

TT5302W96.......................................219

TT54 ..........................................215, 220

TT5402000........................................219

TT5402S95........................................219

TT5402W96.......................................219

TT55 ..........................................215, 218

TT5502S31........................................217

TT5502W34B....................................217

TT552000 ..........................................217

TT56 ..........................................215, 218

TT5602000........................................217

TT5602S31........................................217

TT5602W34B....................................217

TT57...................................................220

TT58 ..........................................215, 220

TT59 ..........................................215, 220

TT5902000........................................219

TT5902S89........................................219

TT5902W89.......................................219

TT60 ..........................................215, 220

TT6002000........................................219

* Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

327

FAX: 773 792-2129

INDEX

TT6002S89........................................219

TT6002W89.......................................219

TT61 ..........................................215, 220

TT6102000........................................219

TT6102S89........................................219

TT6102W89.......................................219

TT62 ..........................................215, 220

TT6202000........................................219

TT6202S89........................................219

TT6202W89.......................................219

TT631...................................................87

TT632A ................................................87

TT632B ................................................87

TT632C................................................87

TT633...................................................87

TT633B ................................................87

TT634A ................................................87

TT634B ................................................87

TT634C................................................87

TT635...................................................87

TT636...................................................87

TT636A ................................................87

TT636C................................................87

TT6W48MCF1...................................223

TT6W48MCN1..................................223

TT6W48VCF1...................................223

TT6W48VCN1...................................223

TT722.................................................264

TT724.................................................264

TT726.................................................264

TT727.................................................264

TT728.................................................264

TT729.................................................264

TT741.................................................264

TT741N0............................................264

TT742.................................................264

TT742N0............................................264

TT744.................................................264

TT744N0............................................264

TT746.................................................264

TT746N0............................................264

TT747.................................................264

TT747N0............................................264

TT748.................................................264

TT749.................................................264

TT861.................................................264

TT862.................................................264

TT864.................................................264

TT866.................................................264

TT867.................................................264

TT868.................................................264

TT869.................................................264

TT89.....................................................89

TT89DC ...............................................89

TT89FM ...............................................89

TT89FMDC..........................................89

TT91001.............................................216

TT91002.............................................216

TT91003.............................................216

TT91004.............................................216

TT91005.............................................216

TT91008.............................................216

TT91011.............................................216

TT91201.............................................216

TT91202.............................................216

TT91203.............................................216

TT91204.............................................216

TT91205.............................................216

TT91208.............................................216

TT91211.............................................216

TT91401.............................................216

TT91402.............................................216

TT91403.............................................216

TT91404.............................................216

TT91405.............................................216

TT91408.............................................216

TT91411.............................................216

TT92001.............................................216

TT92002.............................................216

TT92003.............................................216

TT92004.............................................216

TT92005.............................................216

TT92008.............................................216

TT92011.............................................216

TT92201.............................................216

TT92202.............................................216

TT92203.............................................216

TT92204.............................................216

TT92205.............................................216

TT92208.............................................216

TT92211.............................................216

TT92401.............................................216

TT92402.............................................216

TT92403.............................................216

TT92404.............................................216

TT92405.............................................216

TT92408.............................................216

TT92411.............................................216

TT93001.............................................216

TT93002.............................................216

TT93003.............................................216

TT93004.............................................216

TT93005.............................................216

TT93008.............................................216

TT93011.............................................216

TT93301.............................................216

TT93302.............................................216

TT93303.............................................216

TT93304.............................................216

TT93305.............................................216

TT93308.............................................216

TT93311.............................................216

TT93601.............................................216

TT93602.............................................216

TT93603.............................................216

TT93604.............................................216

TT93605.............................................216

TT93608.............................................216

TT93611.............................................216

TT95.....................................................90

TT95DC ...............................................90

TT95FM ...............................................90

TT95FMDC..........................................90

TT96EDACNO...................................178

TT96EDACNS...................................178

TT96FM ...............................................90

TT96FMDC..........................................90

TTD**..................................................267

TTD5102000 .....................................217

TTD5102S31.....................................217

TTD5102W34B.................................217

TTD5202000 .....................................217

TTD520231........................................217

TTD5202W34B.................................217

TTD5302000 .....................................219

TTD5302S95.....................................219

TTD5302W96....................................219

TTD5402000 .....................................219

TTD5402S95.....................................219

TTD5402W96....................................219

TTD5902000 .....................................219

TTD5902S89.....................................219

TTD5902W89....................................219

TTD6002000 .....................................219

TTD6002S89.....................................219

TTD6002W89....................................219

TTEZN***...........................................177

TTP96ASFN......................................186

TTP96ASHN......................................186

TTP96ASNN......................................186

TTP96K1FN ......................................180

TTP96K1HN......................................180

TTP96K1NN......................................180

TTP96K3BPNS.................................174

TTP96K3FN ......................................180

TTP96K3HN......................................180

TTP96K3NN......................................180

TTP96K3NS......................................168

TTP96K5BPNS.................................174

TTPFA96K1NO.................................164

TTPFA96K1NS..................................164

TTPH96K1NO...................................171

TTPH96K1NS ...................................171

TTPH96K3NO...................................171

TTPH96K3NS ...................................171

TY3F.....................................................37

TY3FPC...............................................37

TY4F.....................................................37

TY4FPC...............................................37

TY5F.....................................................37

TY5FPC...............................................37

TYEF01................................................37

TYEF02................................................37

TYEF03................................................37

TYEF04................................................37

TYEF05................................................37

TYEF08................................................37

TYEF11................................................37

UJ1.......................................................93

UJ2A.....................................................93

UJ2B.....................................................93

UJ4B.....................................................93

US001................................................271

US001PC...........................................271

US001ST...........................................271

VAPK1HD*75T ..........................199-200

VAPK1HD*NT....................................199

VAPK1SD*75T..................................199

VAPK1SD*NT....................................199

VAPK3HD*75T ..........................199-200

VAPK3HD*NT....................................199

VAPK3SD*75T..................................199

VAPK3SD*NT....................................199

VJHD*75T..........................................136

VJHD*75TX.......................................195

VJHD*NT...........................................136

VJHD*NTX.........................................195

VJSD*75T..........................................136

VJSD*75TX .......................................195

VJSD*NT ...........................................136

VJSD*NTX.........................................195

VMAFN..............................................199

VMP**.................................................266

VMVHD*75T......................................199

VMVHD*NT.......................................199

VMVSD*75T......................................199

VMVSD*NT .......................................199

VP**....................................................266

VPP24K1HD*75T .............................193

VPP24K1HD*NT...............................193

VPP24K1SD*75T..............................193

VPP24K1SD*NT...............................193

VPP24K3HD*75T .............................193

VPP24K3HD*NT...............................193

VPP24K3SD*75T..............................193

VPP24K3SD*NT...............................193

VPP26K1HD*75T .............................193

VPP26K1HD*NT...............................193

VPP26K1SD*75T..............................193

VPP26K1SD*NT...............................193

VPP26K3HD*75T .............................193

VPP26K3HD*NT...............................193

VPP26K3SD*75T..............................193

VPP26K3SD*NT...............................193

W11003..............................................231

W11003L ...........................................231

W11006..............................................231

W11006L ...........................................231

W11012..............................................231

W11012L ...........................................231

W11203..............................................231

W11203L ...........................................231

W11206..............................................231

W11206L ...........................................231

W11212..............................................231

W11212L ...........................................231

W1332A.............................................203

W1334B.............................................203

W1532A301.......................................203

W1532B301.......................................203

W1534B.............................................203

W1534B301.......................................203

W1632B.............................................212

W1634B.............................................212

W1789................................................212

W2532A.............................................205

W2533B.............................................205

W2732A301.......................................205

W2732B.............................................205

W2732B301.......................................205

W2734B301.......................................205

W2789................................................205

W3M.....................................................25

W4M.....................................................25

WA1634B...........................................212

WAD1634B........................................212

WB1650.............................................212

WB1795.............................................212

WB1796.............................................212

WBD1634B........................................212

WBD1650..........................................212

WBD1795..........................................212

WC1634B..........................................212

WCD1634B .......................................212

WCMT331............................................83

WCMT332A.........................................84

WCMT332B.........................................83

WCMT333............................................84

WCMT334B.........................................83

WCMT335............................................84

WCMT335A.........................................84

WCMT336............................................83

WCMT336A.........................................83

WCMT336B.........................................84

WCMT336C.........................................83

WCMT336D.........................................83

WCMT336E.........................................84

WD1632B..........................................212

WD1634B..........................................212

WD1789.............................................212

WMT331..............................................83

WMT332A............................................84

WMT332B............................................83

WMT332C............................................84

WMT333..............................................84

WMT333B............................................84

WMT333E............................................84

WMT334A............................................84

WMT334B............................................83

WMT334C............................................84

WMT334E............................................84

WMT334F............................................84

WMT335..............................................84

WMT335A............................................84

WMT336..............................................83

WMT336A............................................83

WMT336B............................................84

WMT336C............................................83

WMT336D............................................83

WMT336E............................................84

WMT342B............................................83

WMT344B............................................84

WMT388..............................................85

WMT389..............................................85

* Please visit the product pages on our website for the most up-to-date product information

328

www.switchcraft.com ® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

PHONE: 773 792-2700

INDEX

WTT31 .................................................87

WTT31DC............................................87

WTT31FM............................................87

WTT31FMDC......................................87

WTT32A...............................................87

WTT32ADC.........................................87

WTT32AFM.........................................87

WTT32AFMDC....................................87

WTT32B...............................................87

WTT32BDC.........................................87

WTT32BFM.........................................87

WTT32BFMDC....................................87

WTT32C...............................................87

WTT32CDC.........................................87

WTT32CFM.........................................87

WTT32CFMDC...................................87

WTT33 .................................................87

WTT33B...............................................87

WTT33BDC.........................................87

WTT33BFM.........................................87

WTT33BFMDC....................................87

WTT33DC............................................87

WTT33FM............................................87

WTT33FMDC......................................87

WTT34A...............................................87

WTT34ADC.........................................87

WTT34AFM.........................................87

WTT34AFMDC....................................87

WTT34B...............................................87

WTT34BDC.........................................87

WTT34BFM.........................................87

WTT34BFMDC....................................87

WTT35 .................................................87

WTT35DC............................................87

WTT35FM............................................87

WTT35FMDC......................................87

WTT36 .................................................87

WTT36A...............................................87

WTT36ADC.........................................87

WTT36AFM.........................................87

WTT36AFMDC....................................87

WTT36C...............................................87

WTT36CDC.........................................87

WTT36CFM.........................................87

WTT36CFMDC...................................87

WTT36DC............................................87

WTT36FM............................................87

WTT36FMDC......................................87

WTT631...............................................87

WTT632A.............................................87

WTT632B.............................................87

WTT632C ............................................87

WTT633...............................................87

WTT633B.............................................87

WTT634A.............................................87

WTT634B.............................................87

WTT634C ............................................87

WTT635...............................................87

WTT636...............................................87

WTT636A.............................................87

WTT636C ............................................87

WTT89 .................................................89

WTT89DC............................................89

WTT89FM............................................89

WTT89FMDC......................................89

WTT95 .................................................90

WTT95DC............................................90

WTT95FM............................................90

WTT95FMDC......................................90

WTT96FM............................................90

WTT96FMDC......................................90

X1332A..............................................203

X1332B..............................................203

X1334B..............................................203

X1532A..............................................203

X1532B301........................................203

X1534B..............................................203

X1542B315........................................203

X21248...............................................317

X2432A..............................................205

X2432B..............................................205

X2434B..............................................205

X2532A..............................................205

X2532B..............................................205

X2534B..............................................205

X2732A..............................................205

X2732A301........................................205

X2732B..............................................205

X2732B301........................................205

X2734B..............................................205

X2734B301........................................205

X2832A..............................................205

X2932A..............................................205

X51248...............................................317

XMT332A.............................................84

XMT332B.............................................84

XMT334B.............................................84

Y21248...............................................317

Y28248...............................................317

Y3F.......................................................22

Y3FD....................................................22

Y3FPC..................................................22

Y3MPC.................................................22

Y51248...............................................317

YEF01..................................................22

YEF02..................................................22

YEF03..................................................22

YEF04..................................................22

YEF05..................................................22

YEF08..................................................22

YMT332A.............................................84

YMT332B.............................................84

YMT334B.............................................84

Z15J ...................................................108

Z21248...............................................317

Z28248...............................................317

Z51248...............................................317

* Please visit the product pages on our website for the most up-to-date product information