Full sound spec. page 22 Product Code Duty m3/sec @ Pa 75 100 125 Nominal Speed (RPM) 0 25 50 ebm 200-21 2600 0.253 0.240 0.214 0.180 0.097 ebm 200-41 1400 0.117 0.075 0.013 - ebm 250-21 2500 0.504 0.470 0.430 ebm 250-41 1400 0.268 0.200 ebm 315-21 1410 0.678 ebm 350-41 1400 ebm 400-41 ebm 450-41 Input FLC Power (kW) (A) Controllers page 20 SC (A) dBA @ 3m Max Ambient Temp (C) Weight (kg) DOL 0.32 1.28 55 70 3 - REE 30 0.016 0.062 0.248 38 60 2.8 - - 0.14 0.6 2.4 60 60 3.8 - 0.047 0.21 0.84 44 45 0.12 0.57 2.28 49 - 0.18 0.782 3.128 - 0.3 1.353 0.47 2.2 150 175 0.076 - - 0.071 - - - - 0.370 0.241 - - 0.100 0.046 - - - 0.610 0.508 0.310 0.229 - - 0.864 0.780 0.690 0.566 - - - 1400 1.389 1.272 1.152 1.015 0.826 0.444 - 1400 1.870 1.765 1.650 1.535 1.390 1.200 0.900 0.665 Control Options Elec Trans Dimensions (mm) C D E F G H 260 7 200 215 46 73 6 312 260 7 200 215 46 73 6 RTRE2 EG 370 320 7 254 265 49 73 6 REE 30 RTRE2 EG 370 320 7 254 265 49 73 6 STET10B REE 30 RTRE2 EG 430 380 9 345 355 62 78 11 6.8 STET10B REE 30 RTRE2 EG 485 435 9 388 400 68 79 16 60 7.3 STET10B REE 30 RTRE2 EG 540 490 9 417 425 86 79 16 70 9.6 STET10B REE 30 RTRE4 EG 576 535 11 465 480 86 81 16 A B RTRE2 EG 312 REE 30 RTRE2 EG STET10B REE 30 3.4 - 70 6.8 54 60 5.412 61 8.8 57 ebm Fans Single Phase - 200mm to 450mm 2000 1000 cfm 3000 4000 wg 175 0.7" 150 0.6" 0.5" eb 0.4" m 100 -41 450 -41 400 -41 350 ebm 00-41 -41 315 ebm 21 ebm 250- ebm 2 25 ebm 200-21 0-41 50 0.3" m eb 75 ebm 25 Pressure Pa (st) 125 0.2" 0.1" 0 0 1 VOL 2 The ebm range of Plate Axial fans is based around the ebm Werke external rotor motor and an aerodynamically designed impeller to provide a very compact, efficient unit. Key features are: * * * * * * * * * * * Pressed steel blades with low noise sickle blade design Maintenance free, sealed-for-life bearings Insulation class `B' and IP44 protection (sizes 200 to 250) Insulation class `F' and IP44 protection (sizes 315 to 450) 230V, 1 Phase, 50Hz electrical supply Thermal protection (TK) 100% speed controllable motors Pressed galvanised steel wallplate, incorporating full bellmouth Corrosion resistant coating in black Inlet guard IP54 terminal box. m 3 /sec The fan performances quoted were determined to DIN Standard 24 166 in a test rig complying to DIN Standard 24 163 Part 2 (ISO 5801) Installation type `A' (DIN 24 163 Part 1. Suction pressure on inlet side with free outlet). Fans are tested in standardised laboratory conditions. Installed conditions can affect fan performance. All fans are suitable for reverse operating conditions with a reduction in performance. 2 Airflow F H oD oE A oC G J B