1
TPV7025MOTOROLA RF DEVICE DATA
The RF Line
. . . designed for output stages in Band IV & V TV transmitter amplifiers. Internal
matching of both input and output along with use of a push–pull package
configuration aids broadband amplifier designs.
Gold metallized dice with diffused emitter ballast resistors enhances
reliability, ruggedness and linearity.
•Band IV & V (470–860 MHz)
•25 W — Pref @ –45 dB IMD
•25 V — VCC
•Push–Pull Package
•Gold Metallization for Reliability
MAXIMUM RATINGS
Rating Symbol Value Unit
Collector–Emitter Voltage VCEO 28 Vdc
Collector–Base Voltage VCBO 45 Vdc
Emitter–Base Voltage VEBO 4.0 Vdc
Operating Junction Temperature TJ200 °C
Storage Temperature Range Tstg –50 to +200 °C
Operating Case Temperature TC70 °C
THERMAL CHARACTERISTICS
Characteristic Symbol Max Unit
Thermal Resistance, Junction to Case (TC = 70°C) RθJC 1.5 °C/W
ELECTRICAL CHARACTERISTICS
Characteristic Symbol Min Typ Max Unit
OFF CHARACTERISTICS (1)
Collector–Emitter Breakdown Voltage
(IC = 120 mA, IB = 0) V(BR)CEO 28 — — Vdc
Collector–Base Breakdown Voltage
(IC = 20 mA, IE = 0) V(BR)CBO 45 — — Vdc
Emitter–Base Breakdown Voltage
(IE = 6.0 mA, IC = 0) V(BR)EBO 4.0 — — Vdc
ON CHARACTERISTICS (1)
DC Current Gain
(IC = 1.0 A, VCE = 20 V) hFE 10 — 60 —
DYNAMIC CHARACTERISTICS (1)
Output Capacitance
(VCB = 28 V, IE = 0, f = 1.0 MHz) Cob 64 — 80 pF
NOTE: (continued)
1. Each transistor chip measured separately.
Order this document
by TPV7025/D
SEMICONDUCTOR TECHNICAL DATA
25 W, 470–860 MHz
UHF LINEAR
POWER TRANSISTOR
CASE 398–03, STYLE 1
(BMA–4)
Motorola, Inc. 1994
TPV7025
2MOTOROLA RF DEVICE DATA
ELECTRICAL CHARACTERISTICS — continued
Characteristic UnitMaxTypMinSymbol
FUNCTIONAL TESTS (2)
Common–Emitter Amplifier Power Gain
(VCE = 25 V, Pout = 25 W, f = 860 MHz, ICQ = 3.2 A) GPE 9.0 — 10.5 dB
Load Mismatch
(VCE = 25 V, Pout = 24 W, f = 860 MHz,
Load VSWR = ∞:1, All Phase Angles)
ψNo Degradation in Output Power
Overdrive (f = 470 MHz, 2 tones, VCE = 25 V, IC = 3.2 A)
(No Degradation) Pinover 24 — — W
Intermodulation Distortion, 3 Tone
(f = 860 MHz, VCE = 25 V, IE = 3.2 A, Pref = 25 W,
Vision Carrier = –8.0 dB, Sound Carrier = –7.0 dB,
Sideband Signal = –16 dB, Specification TV05001)
IMD1— — –45 dB
Cross Modulation Distortion
(Pref = 25 W, f = 860 MHz, ∆% Sound = (–7.0 dB),
Vision 0 – Peak)
XMOD — — 20 %
NOTE:
2. Both transistor chips operating in push–pull amplifier.
Figure 1. IMD versus Output Power Figure 2. IMD versus Frequency
–45
–55
–65 5 6.25 8 10 12.5 16 20 25 28
Pout, OUTPUT POWER (WATTS)
IMD, INTERMODULATION DISTORTION (dB)
–48
–50
–52
500 f, FREQUENCY (MHz)
IMD, INTERMODULATION DISTORTION (dB)
600 700 800
f = 860 MHz
VCE = 25 V
IC = 3.2 A
Tbp = 25
°
C
3 TONES: –8 dB, –7 dB, –17 dB
Pout = 20 W
VCE = 25 V
IC = 3.2 A
Tbp = 25
°
C
3 TONES: –8 dB, –7 dB, –17 dB
TYPICAL CHARACTERISTICS
3
TPV7025MOTOROLA RF DEVICE DATA
Figure 3. 470–860 MHz Broadband Test Circuit
C1 — 15 pF
C2 — 180 pF
C3 — 10 pF
C4 — 15 pF
C5 — 15 pF
C6 — 180 pF
C7 — 4.7 pF
C8 — 100 pF
L1 — 90 / 16 mm
L2 — 90 / 16 mm
L3 — 35 / 10 mm
L4 — 25 / 7 mm
L5 — 70 / 6 mm
L6 — 70 / 26 mm
L7 — 60 / 16 mm
R1 — 3.3 Ω
Board Material: Teflon Glass Substrate .020 In.
Note: L1 to L7 dimension given in length/width.
VBB VCC
C2
R1
C6
C1
C1 C3 C4 C5 C7
C8
C8 BALUN
C6
R1
C2
VBB VCC
D.U.T.
L1 L2
L6
L5
L3
L3
L4
L4
L7
L7
L5
L1 L2
L6 25
Ω
/ 45 mm
25
Ω
/ 45 mm
50
Ω
BALUN
PRINTED–BALUN
VCE
(Volts)
IC
(A)
f
(GHz)
S11 S21 S12 S22
VCE
(Volts)
IC
(A)
f
(GHz)
Mag ±φMag ±φMag ±φMag ±φ
25 2 x 1.8 0.44
0.46
0.48
0.50
0.52
0.54
0.56
0.58
0.60
0.62
0.64
0.66
0.68
0.70
0.72
0.74
0.76
0.78
0.80
0.82
0.84
0.86
0.88
1.0
1.0
1.0
0.99
0.98
0.97
0.97
0.94
0.92
0.89
0.86
0.82
0.79
0.79
0.79
0.82
0.84
0.86
0.88
0.89
0.90
0.90
0.90
178
176
174
173
171
173
171
169
164
163
163
164
166
169
171
172
172
172
171
170
170
169
168
1.25
1.25
1.30
1.39
1.42
1.52
1.67
1.77
1.93
2.05
2.19
2.29
2.29
2.16
1.99
1.80
1.59
1.38
1.23
1.10
0.99
0.89
0.80
80
84
81
75
70
65
67
49
40
30
18
4.0
–11
–26
–40
–52
–63
–74
–82
–88
–94
–100
–107
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.04
0.04
0.05
0.05
0.05
0.05
0.05
0.05
0.04
0.04
0.03
0.03
0.03
0.03
0.03
29
31
30
29
26
17
12
8.0
0
–9.0
–19
–30
–42
–55
–66
–76
–87
–96
–102
–106
–110
–115
–119
0.89
0.78
0.70
0.65
0.59
0.53
0.46
0.39
0.31
0.23
0.21
0.30
0.43
0.57
0.68
0.77
0.83
0.86
0.88
0.88
0.89
0.88
0.87
156
151
148
145
142
140
139
138
142
157
–173
–150
–147
–150
–155
–161
–168
–173
–178
178
175
172
170
Table 1. Common Emitter S–Parameters
TPV7025
4MOTOROLA RF DEVICE DATA
PACKAGE DIMENSIONS
CASE 398–03
ISSUE C
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
STYLE 1:
PIN 1. COLLECTOR
2. COLLECTOR
3. BASE
4. BASE
5. EMITTER
–A–
U
K
N
G
D
E
J
H
C
1 2
3 4
SEATING
PLANE
Q
–B–
–T–
M
A
M
0.025 (0.010) B M
T
5
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A1.094 1.110 27.79 28.19
B0.457 0.465 11.61 11.81
C0.165 0.182 4.25 4.62
D0.121 0.131 3.08 3.32
E0.055 0.065 1.40 1.65
G0.177 0.185 4.50 4.69
H0.081 0.091 2.06 2.31
J0.002 0.004 0.06 0.10
K0.142 0.163 3.60 4.14
N0.510 0.520 12.95 13.21
Q0.125 0.135 3.18 3.42
U0.844 BSC 21.44 BSC
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty , representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit,
and specifically disclaims any and all liability , including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different
applications. All operating parameters, including “T ypicals” must be validated for each customer application by customer’s technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body , or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer .
Literature Distribution Centers:
USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036.
EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England.
JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan.
ASIA PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Center , No. 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong.
TPV7025/D
*TPV7025/D*
◊
