Approval sheet Soft Termination_X7R (SH_10V~250V) MULTILAYER CERAMIC CAPACITORS Soft Termination Series (SH Series) X7R Dielectric 0603 to 1812 Sizes, 10V to 250V RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1 of 13 ASC_Soft termination_X7R_(SH_10V~250V)_020I_AS Oct. 2012 Approval sheet Soft Termination_X7R (SH_10V~250V) 1. INTRODUCTION WTC soft termination series MLCC is designed and with a polymer layer within end terminations of product, which can absorb mechanical stress caused by PCB handling in SMT line and reduce the mechanical impact for product. It will offer more robust and reliable performance in applications. 2. FEATURES 3. APPLICATIONS b. MLCC's termination are with a soft & flexible polymer layer to withstand high bending stress in SMT line. c. Available for any item in standard series range. a. b. c. d. Automotive industry. Power supply and related industries. Lighting industry. The other mechanical stress concerned products. 4. HOW TO ORDER SH 31 B 104 K 500 C T Series Size Dielectric Capacitance Tolerance Rated voltage Termination Packaging SH=Soft termination 18=0603 (1608) 21=0805 (2012) 31=1206 (3216) 32=1210 (3225) 43=1812 (4532) B=X7R Two significant digits J=5% followed by no. of zeros. K=10% And R is in place of M=20% decimal point. Eg. 104=10x104 =100nF Two significant C=Cu/Polymer T=7" reeled digits followed by /Ni/Sn G=13" reeled no. of zeros. And R is in place of decimal point. 100=10 VDC 160=16 VDC 250=25 VDC 500=50 VDC 101=100VDC 201=200 VDC 251=250 VDC Note 1: Please see below product range to find right termination code. Page 2 of 13 ASC_Soft termination_X7R_(SH_10V~250V)_020I_AS Oct. 2012 Approval sheet Soft Termination_X7R (SH_10V~250V) 5. EXTERNAL DIMENSIONS & CONSTRUCTIONS Size Inch (mm) 0603 (1608) L (mm) W (mm) 1.600.20 0.800.10 0.800.07 1.60 +0.20/-0.10 0.80 +0.15/-0.10 0.80 +0.15/-0.10 0.600.10 A 1.250.10 0.800.10 B 1.250.10 D # 1.250.20 0.800.10 0.950.10 I B C # 1.150.15 J # 1.250.10 D # 1.600.20 G # P # 0.950.10 1.250.10 1.600.20 2.000.20 2.500.30 1.250.10 C D G K M D # # # # # # 2.000.20 K # 2.500.30 M # 2.000.20 0805 (2012) 2.00+0.25/-0.2 1.250.20 3.20+0.4/-0.1 1.600.15 T (mm)/Symbol 1206 (3216) 3.20+0.4/-0.1 3.20+0.4/-0.1 1.600.20 1.60+0.3/0.1 1.60+0.30/-0.10 3.200.40 2.500.20 3.200.50 2.500.30 1210 (3225) 1812 (4532) 4.50+0.6/-0.4 3.200.30 3.200.40 # Reflow soldering only is recommended. Remark MB (mm) L S 0.400.15 T X W 0.500.20 MB MB Fig. 1 The outline of MLCC 0.600.20 Inner electrode Sn Cu/Ni Ag polymer Metallic termination 0.750.25 Ceramic 0.750.25 Fig. 2 The construction of Soft termination series MLCC 6. GENERAL ELECTRICAL DATA Dielectric X7R Size 0603, 0805, 1206, 1210, 1812 Capacitance* 100pF to 1uF Capacitance tolerance** J (5%), K (10%), M (20%) Rated voltage (WVDC) 10V to 250V Tan * Note 1 Insulation resistance at Ur 10G or RxC100-F whichever is smaller Dielectric strength 100V : 2.5 x WVDC ; 200~300V 2 times VDC Operating temperature -55 to +125C Capacitance characteristic 15% * Measured at 1.00.2Vrms, 1.0kHz10% for C10F, 30~70% related humidity, 25C ambient temperatur e for X7R ** Preconditioning for Class II MLCC: Perform a heat treatment at 15010C for 1 hour, then leave in a mbient condition for 242 hours before measurement. X7R Note 1: Rated vol. D.F. Exception of D.F. 3% 50V 2.5% 5% 10% 35V 3.5% 10% 5% 25V 3.5% 7% 10% 5% 16V 3.5% 10% 10% 10V 5% 15% 15% 6.3V 10% 20% 4V 15% --- Page 3 of 13 0201(50V); 06030.047F; 08050.18F;12060.47F 12104.7F 06031F; 08051F;12064.7F; 121010F 08052.2F; 121010F 02010.01F;08051F; 121010F 06030.33F; 12064.7F 04020.10F;06030.47F; 08052.2F;12066.8F ; 121022F 02010.01F;04020.033F; 06030.15F; 08050.68F;12062.2F;12104.7F 0402 0.22uF; 06030.68F;08052.2F;12064.7F; 121022F 02010.012F;04020.33F;06030.33F; 08052.2F;12062.2F;121022F 02010.1F; 04021F 02010.1F;04021F;060310F; 08054.7F;120647F :1210100F 04022.2F --- ASC_Soft termination_X7R_(SH_10V~250V)_020I_AS Oct. 2012 Approval sheet Soft Termination_X7R (SH_10V~250V) 7. CAPACITANCE RANGE (X7R Dielectric) Capacitance DIELECTRIC SIZE RATED VOLTAGE (VDC) 100pF (101) 120pF (121) 150pF (151) 180pF (181) 220pF (221) 270pF (271) 330pF (331) 390pF (391) 470pF (471) 560pF (561) 680pF (681) 820pF (821) 1,000pF (102) 1,200pF (122) 1,500pF (152) 1,800pF (182) 2,200pF (222) 2,700pF (272) 3,300pF (332) 3,900pF (392) 4,700pF (472) 5,600pF (562) 6,800pF (682) 8,200pF (822) 0.010F (103) 0.012F (123) 0.015F (153) 0.018F (183) 0.022F (223) 0.027F (273) 0.033F (333) 0.039F (393) 0.047F (473) 0.056F (563) 0.068F (683) 0.082F (823) 0.10F (104) 0.12F (124) 0.15F (154) 0.18F (184) 0.22F (224) 0.27F (274) 0.33F (334) 0.39F (394) 0.47F (474) 0.56F (564) 0.68F (684) 0.82F (824) 1.0F (105) X7R 10 S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S X X X X X X 16 S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S X X X X X X 0603 25 S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S X X X X X X X X 50 S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S X X X X X X X 100 S S S S S S S S S S S S S S S S S S S S S S S S S 10 D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D I I I I I I I I 16 D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D I I I I I I I I 25 D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D I I I I I I I I 0805 50 D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D 100 D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D 200 D D D D D D D D D D D D D D D D D D D D D D D D D D D D D 250 D D D D D D D D D D D D D D D D D D D D D D D D D D D D D 1. The letter in cell is expressed the symbol of product thickness. 2. For more information about products with special capacitance or other data, please contact WTC local representative. Page 4 of 13 ASC_Soft termination_X7R_(SH_10V~250V)_020I_AS Oct. 2012 Approval sheet Soft Termination_X7R (SH_10V~250V) CAPACITANCE RANGE (X7R Dielectric) Capacitance DIELECTRIC SIZE RATED VOLTAGE (VDC) 10 100pF (101) 120pF (121) 150pF (151) D 180pF (181) D 220pF (221) D 270pF (271) D 330pF (331) D 390pF (391) D 470pF (471) D 560pF (561) D 680pF (681) D 820pF (821) D 1,000pF (102) D 1,200pF (122) D 1,500pF (152) D 1,800pF (182) D 2,200pF (222) D 2,700pF (272) D 3,300pF (332) D 3,900pF (392) D 4,700pF (472) D 5,600pF (562) D 6,800pF (682) D 8,200pF (822) D 0.010F (103) D 0.012F (123) D 0.015F (153) D 0.018F (183) D 0.022F (223) D 0.027F (273) D 0.033F (333) D 0.039F (393) D 0.047F (473) D 0.056F (563) D 0.068F (683) D 0.082F (823) D 0.10F (104) D 0.12F (124) D 0.15F (154) C 0.18F (184) C 0.22F (224) C 0.27F (274) C 0.33F (334) C 0.39F (394) C 0.47F (474) J 0.56F (564) J 0.68F (684) J 0.82F (824) J 1.0F (105) J 16 1206 25 50 100 200 250 D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D C C C C C C D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D C C C C C J J J J J J J J J J J D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D C C C D D P P P P P P D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D G G G D D D D D D D D D D D D D D D D D D D D D D D D D D D D G G G G G G G D D D D D D D D D D D D D D D D D D D D D D D D D D D D G G G G G G G 10 X7R 1210 16 25 50 10 16 25 C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D D D D C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D D D D C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D D D D 1812 50 100 200 250 D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D K K K D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D K K K K K D D D D D D D D D D D D D D D D D D D D D D D D D D K K K K K K K 1. The letter in cell is expressed the symbol of product thickness. 2. For more information about products with special capacitance or other data, please contact WTC local representative. Page 5 of 13 ASC_Soft termination_X7R_(SH_10V~250V)_020I_AS Oct. 2012 D D D D D D D D D D D D D D D D D D D D D D D D D D K K K K K K K Approval sheet Soft Termination_X7R (SH_10V~250V) 8. PACKAGING DIMENSION AND QUANTITY Size 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3225) 1812 (4532) Thickness (mm)/Symbol Paper tape 7" reel 13" reel 7" reel Plastic tape 13" reel 0.800.07 S 4k 15k - 0.80+0.15/-0.10 X 4k 15k - - 0.800.10 B 4k 15k - - 1.250.10 D - - 3k 10k 10k 1.250.20 I - - 3k 0.800.10 B 4k 15k - - 0.950.10 C - - 3k 10k 1.150.15 J - - 3K 10K 1.250.10 D - - 3k 10k 1.600.20 G - - 2k 10k 1.60+0.30/-0.10 P - - 2k 9k 0.950.10 C - - 3k 10k 1.250.10 D - - 3k 10k 1.600.20 2.000.20 G K - - 2k 1k 6k 2.500.30 M - - 1k 6k 1.250.10 D - - 1k 5k 2.000.20 2.500.30 K M - - 1k 0.5k 3k Unit: pieces Page 6 of 13 ASC_Soft termination_X7R_(SH_10V~250V)_020I_AS Oct. 2012 Approval sheet Soft Termination_X7R (SH_10V~250V) 9. RELIABILITY TEST CONDITIONS AND REQUIREMENTS No. Item 1. Visual and Test Condition * No remarkable defect. * Dimensions to conform to individual specification sheet. Class I: NP0 * Shall not exceed the limits given in the detailed spec. Mechanical 2. Capacitance 3. Q/ D.F. (Dissipation Cap1000pF 1.00.2Vrms, 1MHz10% Factor) Requirements --- Cap>1000pF 1.00.2Vrms, 1KHz10% Class II: X7R,X7E, X5R,Y5V Cap10F, 1.00.2Vrms, 1kHz10% ** Cap>10F, 0.50.2Vrms, 120Hz20% NP0: Cap30pF, Q1000; Cap<30pF,Q400+20C X7R, X5R: Rated D.F. vol. Exception of D.F. 3% 0201(50V); 06030.047F; 08050.18F;12060.47F 50V 2.5% 5% 12104.7F 10% 06031F; 08051F;12064.7F; 121010F ** Test condition: 0.50.2Vrms1KHz10% 35V X7R: 0603225(10V), 0805=106(6.3V&10V) 25V X5R: 01R5103, 0201224 (6.3V), 0402475 (6.3V), 0402225(10V), 0603=106 (6.3V), TT18X475(10V) , TT15X series 16V 10V 6.3V 4V 4a. Dielectric Strength *To apply voltage(100V) 250%. 4b. 3.5% 10% 08052.2F; 121010F 5% 02010.01F;08051F; 121010F 3.5% 7% 06030.33F; 12064.7F 04020.10F;06030.47F; 08052.2F; 10% 12066.8F ; 121022F 02010.01F;04020.033F; 5% 08050.68F;12062.2F;12104.7F 3.5% 0402 0.22uF; 06030.68F;08052.2F; 10% 12064.7F; 121022F; TT series 02010.012F;04020.33F;06030.33F; 08052.2F; 10% 12062.2F;121022F; TT series 5% 15% 02010.1F; 04021F 02010.1F;04021F;060310F; 08054.7F; 15% 120647F :1210100F 10% 20% 04022.2F 15% --- --- *No evidence of damage or flash over during test. *Duration: 1 to 5 sec. *Charge & discharge current less than 50mA. *To apply voltage: 200V ~300V & LD series 2 times V DC 500V ~ 999V 1.5 times V DC 1000V ~ 3000V 1.2 times V DC *Cut-off, set at 10mA *TEST= 15 sec. *RAMP=0 Dielectric Strength * To apply 1500 VAC voltage. * No evidence of damage or flash over during test. (for X1/Y2 & X2/Y3) * Duration: 60 sec. 5. Insulation To apply rated voltage for max. 120 sec. Resistance 10G or RxC500-F whichever is smaller. Class II (X7R, X7E, X5R, Y5V) Insulation Resistance Rated voltage 100V: X7R 50V:06031F;08051F;12064.7F;12104.7F 35V:08052.2F;121010F 25V:04021F;06032.2F;08052.2F;120610F;121010F 16V:04020.22F;06031F;08052.2F;120610F;121047F 10V:020147nF;04020.47F;06030.47F;08052.2F; 12064.7F;121047F 6.3V ; 4V Rated Voltage: 200V ~ 630V Rated Voltage: >630V 6. Temperature Coefficient To apply rated voltage >10G or 100-F whichever is smaller. (500V max.) for 60 sec. To apply 500V for 60sec. >10G With no electrical load. T.C. Operating Temp NPO (C0G) -55~125C at 25C NPO (C0H) -55~125C at 25C NPO (C0J) -55~125C at 25C X7R -55~125C at 25C X7E -55~125C at 25C X5R -55~ 85C at 25C Y5V -25~ 85C at 20C 7. Adhesive Strength *Pressurizing force of Termination Page 7 of 13 10G or RxC100 -F whichever is smaller. T.C. NPO (C0G) NPO (C0H) NPO (C0J) X7R X7E X5R Y5V Capacitance Change Within 30ppm/C Within 60ppm/C Within 120ppm/C Within 15% Within 4.7% Within 15% Within +30%/-80% * No remarkable damage or removal of the terminations. 0201: 2N 0402 & 0603: 5N >0603: 10N *Test time10 1 sec ASC_Soft termination_X7R_(SH_10V~250V)_020I_AS Oct. 2012 Approval sheet Soft Termination_X7R (SH_10V~250V) No. Item 8. Vibration Resistance Test Condition Requirements * Vibration frequency: 10~55 Hz/min. * Total amplitude: 1.5mm * Test time: 6 hrs. (Two hrs each in three mutually perpendicular directions.) * No remarkable damage. * Cap change and Q/D.F.: To meet initial spec. * Measurement to be made after keeping at room temp. for 242 hrs. 9. Solderability * Solder temperature: 2355C 10. 11. 12. 95% min. coverage of all metalized area. * Dipping time: 20.5 sec. Bending Test *The middle part of substrate shall be pressurized by means of * No remarkable damage. the pressurizing rod at a rate of about 1 mm per second until the * Cap change deflection becomes 1 mm / SH series: 5 mm** & 3 mm*** and NP0: within 5% or 0.5pF whichever is larger X7R, X7E, X5R: within 12.5% , Y5V: within 30% then the pressure shall be maintained for 51 sec. *Measurement to be made after keeping at room temp. for 242 (This capacitance change means the change of capacitance under specified flexure of hrs. (** Thickness >1.0mm; *** Thickness1.0mm) substrate from the capacitance measured before the test.) Resistance to * Solder temperature: 2605C * No remarkable damage. Soldering * Dipping time: 101 sec * Cap change: Heat * Preheating: 120 to 150C for 1 minute before immerse the NP0: within 2.5% or 0.25pF whichever is larger capacitor in a eutectic solder. X7R, X7E, X5R: within 7.5% * Before initial measurement (Class II only): Perform Y5V: within 20% 150+0/-10C for 1 hr and then set for 484 hrs at room temp. * Q/D.F., I.R. and dielectric strength: To meet initial requirements. * Before initial measurement (Class II only): Perform * 25% max. leaching on each edge. 150+0/-10C for 1 hr and then set for 242 hrs at room temp. * Measurement to be made after keeping at room temp. for 242 hrs. Temperature * Conduct the five cycles according to the temperatures and time. * No remarkable damage. Cycle * Cap change Step Temp. (C) Time (min.) NP0: within 2.5% or 0.25pF whichever is larger 1 Min. operating temp. +0/-3 303 X7R, X7E, X5R: within 7.5% 2 Room temp. 2~3 Y5V: within 20% * Q/D.F., I.R. and dielectric strength: To meet initial requirements. 3 Max. operating temp. +3/-0 303 4 13. Room temp. 2~3 * Before initial measurement (Class II only): Perform 150+0/-10C for 1 hr and then set for 242 hrs at room temp. * Measurement to be made after keeping at room temp. for 242 hrs. Humidity * Test temp.: 402C * No remarkable damage. (Damp Heat) * Humidity: 90~95% RH * Cap change: NP0: within 5% or 0.5pF whichever is larger Steady State * Test time: 500+24/-0hrs. X7R, X7E, X5R: 10V, within 12.5%; 6.3V, within 25% *Before initial measurement (Class II only): Perform 150+0/-10C TT series & C 1uF, within 25% for 1 hr and then set for 242 hrs at room temp. Y5V: 10V, within 30%; 6.3V, within +30/-40% * Measurement to be made after keeping at room temp. for 242 * Q/D.F. value: hrs. NP0: More than 30pF Q350, 10pFC30pF, Q275+2.5C,Less than 10pF Q200+10C X7R, X5R: Rated D.F. Exception of D.F. vol. 6% 50V 3% 0201(50V);06030.047F; 08050.18F; 12060.47F 10% 12104.7F 20% 06031F; 08051F;12064.7F; 121010F 35V 5% 20% 08052.2F;121010F 10% 02010.01F;08051F; 121010F 25V 16V 10V 6.3V 4V 14% 06030.33F;12064.7F 04020.10F;06030.47F;08052.2F;12066.8F; 15% 121022F 10% 06030.15F;08050.68F;12062.2F;12104.7F 5 02010.01F;04020.033F;06030.68F;08052.2F; 15% 12064.7F; 121022F 02010.012F;04020.33F; 06030.33F; 15% 08052.2F; 12062.2F; 121022F 7.5% 20% 02010.1F ;04021F 02010.1F;04021F;060310F; 15% 30% 08054.7F;120647F;1210100F 20% ----5% *I.R.: 10V, 1G or 50 -F whichever is smaller. Class II (X7R, X7E, X5R, Y5V) Insulation Resistance Rated voltage 100V: X7R 50V:06031F;08051F;12064.7F;12104.7F 35V:08052.2F;121010F 25V:04021F;06032.2F;08052.2F;120610F;121010F 16V:04020.22F;06031F;08052.2F;120610F;121047F 10V:020147nF;04020.47F;06030.47F;08052.2F; 12064.7F;121047F 6.3V ; 4V Page 8 of 13 ASC_Soft termination_X7R_(SH_10V~250V)_020I_AS 1G or RxC 10 -F whichever is smaller. Oct. 2012 Approval sheet Soft Termination_X7R (SH_10V~250V) No Item 14 Humidity (Damp Heat) Load Test Condition * Test temp.: 402C * Humidity: 90~95%RH * Test time: 500+24/-0 hrs. * To apply voltage Rated voltage.(Max.500V) * Before initial measurement (Class II only): To apply test voltage for 1hr Requirements * No remarkable damage. Cap change: NP0: 7.5% or 0.75pF whichever is larger. X7R, X7E, X5R: 10V, within 12.5%; 6.3V, within 25%, TT series & Cap1F, within 25% Y5V: 10V, within 30%; 6.3V, within +30/-40% Q/D.F. value: NP0: C30pF,Q200;C<30pF, Q100+10/3C X7R, X5R: Rated D.F. Exception of D.F. vol. at 40C and then set for 242 hrs at 6% room temp. 50V 3% * Measurement to be made after keeping at room temp. for 242 hrs. 35V 5% 0201(50V);06030.047F; 08050.18F; 12060.47F 10% 12104.7F 20% 06031F; 08051F;12064.7F; 121010F 20% 08052.2F;121010F 10% 02010.01F;08051F; 121010F 25V 16V 10V 6.3V 4V 14% 06030.33F;12064.7F 04020.10F;06030.47F;08052.2F;12066.8F; 15% 121022F 10% 06030.15F;08050.68F;12062.2F;12104.7F 5 02010.01F;04020.033F;06030.68F;08052.2F; 15% 12064.7F; 121022F 02010.012F;04020.33F; 06030.33F; 15% 08052.2F; 12062.2F; 121022F 7.5% 20% 02010.1F ;04021F 02010.1F;04021F;060310F; 15% 30% 08054.7F;120647F;1210100F 20% ----5% *I.R.: 10V, 500M or 25 -F whichever is smaller. Class II (X7R, X7E, X5R, Y5V) Rated voltage Insulation Resistance 100V: X7R 50V:06031F;08051F;12064.7F;12104.7F 35V:08052.2F;121010F 25V:04021F;06032.2F;08052.2F;120610F;121010F 16V:04020.22F;06031F;08052.2F;120610F;121047F 10V:020147nF;04020.47F;06030.47F;08052.2F; 12064.7F;121047F 6.3V ; 4V Page 9 of 13 ASC_Soft termination_X7R_(SH_10V~250V)_020I_AS 500M or RxC5 -F whichever is smaller. Oct. 2012 Approval sheet Soft Termination_X7R (SH_10V~250V) No Item 15. High Test Condition *Test temp. Temperature NP0, X7R/X7E: 1253C Load X5R, Y5V: 853C (Endurance) *Test time: 1000+24/-0 hrs. *To apply voltage: (1) 6.3V or C10F or TT series: 150% of rated voltage. (2) 10VUr<500V: 200% of rated voltage. (3) 500V: 150% of rated voltage. (4) Ur630V: 120% of rated voltage. (5) 100% of rated voltage for below range. Requirements * No remarkable damage. Cap change: NP0: 3.0% or 0.3pF whichever is larger X7R, X7E, X5R: 10V, within 12.5%; 6.3V, within 25%, TT series & Cap1F, within 25% Y5V: 10V, within 30%; 6.3V, within +30/-40% Q/D.F. value: NP0: More than 30pF, Q350; 10pFC<30pF, Q275+2.5C; Less than 10pF, Q200+10C X7R, X5R: Rated D.F. Exception of D.F. vol. 6% 50V 3% 0201(50V);06030.047F; 08050.18F; 12060.47F 10% 12104.7F 20% 06031F; 08051F;12064.7F; 121010F 35V 5% 20% 08052.2F;121010F 10% 02010.01F;08051F; 121010F Rated voltage Capacitance range X5R/X7R 6.3V,10V C0.1F X5R/X7R 6.3V,10V C1.0F 0603 X5R/X7R 6.3V,10V C4.7F 0805 X5R/X7R 6.3V C22F Size Dielectric 0201 0402 X5R/X7R 6.3V C47F NP0 3000V C1.5pF 1206 (6)150% of rated voltage for below range. 25V 16V 10V 6.3V 4V Size 0402 0603 0805 Dielectric X5R/X7R Y5V X5R/X7R Y5V X5R/X7R Y5V Rated voltage Capacitance range 10V,16V, C0.22F 25V 16V C0.47F 14% 06030.33F;12064.7F 04020.10F;06030.47F;08052.2F;12066.8F; 15% 121022F 10% 06030.15F;08050.68F;12062.2F;12104.7F 5 02010.01F;04020.033F;06030.68F;08052.2F; 15% 12064.7F; 121022F 02010.012F;04020.33F; 06030.33F; 15% 08052.2F; 12062.2F; 121022F 7.5% 20% 02010.1F ;04021F 02010.1F;04021F;060310F; 15% 30% 08054.7F;120647F;1210100F 20% ----5% *I.R.: 10V, 1G or 50 -F whichever is smaller. Class II (X7R, X7E, X5R, Y5V) Rated voltage 10V,16V C1.0F 16V 10V 16V C2.2F C4.7F C4.7F Insulation Resistance 100V: X7R 50V:06031F;08051F;12064.7F;12104.7F 35V:08052.2F;121010F 25V:04021F;06032.2F;08052.2F;120610F;121010F *Before initial measurement (Class II 16V:04020.22F;06031F;08052.2F;120610F;121047F only): To apply test voltage for 1hr at 10V:020147nF;04020.47F;06030.47F;08052.2F; 12064.7F;121047F test temp. and then set for 242 hrs 6.3V ; 4V at room temp. 1G or RxC 10 -F whichever is smaller. *Measurement to be made after keeping at room temp. for 242 hrs Page 10 of 13 ASC_Soft termination_X7R_(SH_10V~250V)_020I_AS Oct. 2012 Approval sheet Soft Termination_X7R (SH_10V~250V) APPENDIXES Tape & reel dimensions Fig. 3 The dimension of paper tape Fig. 4 The dimension of plastic tape Size Thickness A0 B0 T K0 W P0 10xP0 P1 P2 D0 D1 E F 0603 S, X 1.020.05 1.800.05 0.950.05 8.000.10 4.000.10 40.00.10 4.000.10 2.000.05 1.550.05 1.750.05 3.500.05 A 1.500.10 2.300.10 0.750.05 8.000.10 4.000.10 40.00.10 4.000.10 2.000.05 1.550.05 1.750.05 3.500.05 0805 B 1.500.10 2.300.10 0.950.05 8.000.10 4.000.10 40.00.10 4.000.10 2.000.05 1.550.05 1.750.05 3.500.05 C, D, I <1.57 <2.40 0.230.05 <2.50 8.000.10 4.000.10 40.00.10 4.000.10 2.000.05 1.500.05 1.000.10 1.750.10 3.500.05 Size Reel size C W1 A N B 2.000.10 3.500.10 0.950.05 8.000.10 4.000.10 40.00.10 4.000.10 2.000.05 1.500.05 1.750.10 3.500.05 1206 C, J, D <1.85 <3.46 0.230.05 <2.50 8.000.10 4.000.10 40.00.10 4.000.10 2.000.05 1.500.05 1.000.10 1.750.10 3.500.05 G <1.95 <3.67 0.230.05 <2.50 8.000.10 4.000.10 40.00.10 4.000.10 2.000.05 1.500.05 1.000.10 1.750.10 3.500.05 1210 C, D, G M <2.97 <2.97 <3.73 <3.73 0.230.05 0.230.05 <2.50 <3.00 8.000.10 8.000.10 4.000.100 4.000.10 40.00.10 40.00.10 4.000.10 4.000.10 2.000.05 2.000.05 1.500.05 1.500.05 1.000.10 1.000.10 1.750.10 1.750.10 3.500.05 3.500.05 0402, 0603, 0805, 1206, 1210 7" 10" 13" 13.0+0.5/-0.2 13.0+0.5/-0.2 13.0+0.5/-0.2 8.4+1.5/-0 8.4+1.5/-0 8.4+1.5/-0 178.00.10 250.01.0 330.01.0 60.0+1.0/-0 100.01.0 1001.0 1812 D, K <3.81 <5.30 0.250.05 <2.50 12.00.20 4.000.10 40.00.10 8.000.10 2.000.05 1.500.05 1.500.10 1.750.10 5.500.05 1812 7" 13.0+0.5/-0.2 12.4+2.0/-0 178.00.10 60.0+1.0/-0 Fig. 5 The dimension of reel Page 11 of 13 ASC_Soft termination_X7R_(SH_10V~250V)_020I_AS Oct. 2012 Approval sheet Soft Termination_X7R (SH_10V~250V) Description of customer label a. Customer name b. WTC order series and item number c. Customer P/O d. Customer P/N e. Description of product f. Quantity g. Bar code including quantity & WTC P/N or customer h. WTC P/N i. Shipping date j. Order bar code including series and item numbers k. Serial number of label Storage and handling conditions (1) To store products at 5 to 40C ambient temperature and 20 to 70%. related humidity conditions. (2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life extension is needed. Cautions: a. The corrosive gas reacts on the terminal electrodes of capacitors, and results in the poor solderability. Do not store the capacitors in the ambience of corrosive gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas etc.) b. In corrosive atmosphere, solderability might be degraded, and silver migration might occur to cause low reliability. c. Due to the dewing by rapid humidity change, or the photochemical change of the terminal electrode by direct sunlight,the solderability and electrical performance may deteriorate. Do not store capacitors under direct sunlight or dewing condition. To store products on the shelf and avoid exposure to moisture. Page 12 of 13 ASC_Soft termination_X7R_(SH_10V~250V)_020I_AS Oct. 2012 Approval sheet Soft Termination_X7R (SH_10V~250V) Recommended soldering conditions The lead-free termination MLCCs are not only to be used on SMT against lead-free solder paste, but also suitable against lead-containing solder paste. If the optimized solder joint is requested, increasing soldering time, temperature and concentration of N2 within oven are recommended. 4 / sec max Over 60sec at least by natural cooling Fig. 6 Recommended reflow soldering profile for SMT process with SnAgCu series solder paste. Page 13 of 13 Fig. 7 Recommended wave soldering profile for SMT process with SnAgCu series solder. ASC_Soft termination_X7R_(SH_10V~250V)_020I_AS Oct. 2012