IE-V850E-MC-A - NEC Electronics

User’s Manual

Target Devices

V850E1 (NB85E Core)

V850E/MA1TM

V850E/MA2TM

V850E/SV2TM

V850E/IA1TM

V850E/IA2TM

IE-V850E-MC,

IE-V850E-MC-A

In-Circuit Emulator

Document No. U14487EJ2V0UM00 (2nd edition)

Date Published September 2003 N CP(K)

Printed in Japan 1999

User’s Manual U14487EJ2V0UM

[MEMO]

User’s Manual U14487EJ2V0UM 3

V850 Series, V850E/MA1, V850E/MA2, V850E/SV2, V850E/IA1, and V850E/IA2 are trademarks of NEC

Electronics Corporation.

Windows is either a trademark or a registered trademark of Microsoft Corporation in the United States and/or

other countries.

PC/AT is a trademark of International Business Machines Corporation.

Ethernet is a trademark of Xerox Corporation.

The information in this document is current as of March, 2003. The information is subject to change

without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or

data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all

products and/or types are available in every country. Please check with an NEC Electronics sales

representative for availability and additional information.

No part of this document may be copied or reproduced in any form or by any means without the prior

written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may

appear in this document.

NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual

property rights of third parties by or arising from the use of NEC Electronics products listed in this document

or any other liability arising from the use of such products. No license, express, implied or otherwise, is

granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.

Descriptions of circuits, software and other related information in this document are provided for illustrative

purposes in semiconductor product operation and application examples. The incorporation of these

circuits, software and information in the design of a customer's equipment shall be done under the full

responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by

customers or third parties arising from the use of these circuits, software and information.

While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,

customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To

minimize risks of damage to property or injury (including death) to persons arising from defects in NEC

Electronics products, customers must incorporate sufficient safety measures in their design, such as

redundancy, fire-containment and anti-failure features.

NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and

"Specific".

The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-

designated "quality assurance program" for a specific application. The recommended applications of an NEC

Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of

each NEC Electronics product before using it in a particular application.

The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC

Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications

not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to

determine NEC Electronics' willingness to support a given application.

(Note)

•

M8E 02. 11-1

(1)

(2)

"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its

majority-owned subsidiaries.

"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as

defined above).

Computers, office equipment, communications equipment, test and measurement equipment, audio

and visual equipment, home electronic appliances, machine tools, personal electronic equipment

and industrial robots.

Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster

systems, anti-crime systems, safety equipment and medical equipment (not specifically designed

for life support).

Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life

support systems and medical equipment for life support, etc.

"Standard":

"Special":

"Specific":

User’s Manual U14487EJ2V0UM

Regional Information

• Device availability

• Ordering information

• Product release schedule

• Availability of related technical literature

• Development environment specifications (for example, specifications for third-party tools and

components, host computers, power plugs, AC supply voltages, and so forth)

• Network requirements

In addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary

from country to country.

[GLOBAL SUPPORT]

http://www.necel.com/en/support/support.html

NEC Electronics America, Inc. (U.S.)

Santa Clara, California

Tel: 408-588-6000

800-366-9782

NEC Electronics Hong Kong Ltd.

Hong Kong

Tel: 2886-9318

NEC Electronics Hong Kong Ltd.

Seoul Branch

Seoul, Korea

Tel: 02-558-3737

NEC Electronics Shanghai, Ltd.

Shanghai, P.R. China

Tel: 021-6841-1138

NEC Electronics Taiwan Ltd.

Taipei, Taiwan

Tel: 02-2719-2377

NEC Electronics Singapore Pte. Ltd.

Novena Square, Singapore

Tel: 6253-8311

J03.4

EC Electronics (Europe) GmbH

Duesseldorf, Germany

Tel: 0211-65 03 01

• Sucursal en España

Madrid, Spain

Tel: 091-504 27 87

Vélizy-Villacoublay, France

Tel: 01-30-67 58 00

• Succursale Française

• Filiale Italiana

Milano, Italy

Tel: 02-66 75 41

• Branch The Netherlands

Eindhoven, The Netherlands

Tel: 040-244 58 45

• Tyskland Filial

Taeby, Sweden

Tel: 08-63 80 820

• United Kingdom Branch

Milton Keynes, UK

Tel: 01908-691-133

Some information contained in this document may vary from country to country. Before using any NEC

Electronics product in your application, pIease contact the NEC Electronics office in your country to

obtain a list of authorized representatives and distributors. They will verify:

User’s Manual U14487EJ2V0UM 5

Major Revisions in This Edition

Page Description

Throughout • Addition of V850E/MA2, V850E/SV2, and V850E/IA2 as target devices

• Addition of IE-70000-PCI-IF-A as corresponding PC interface board

• Modification of IE-V850E-MC-A shape

p.11 1.1 Hardware Configuration

• Addition of IE-703166-MC-EM1 and IE-703114-MC-EM1 as option boards

• Addition of SWEX-xxxSD-1 as extension probe

p.13 1.3 Function Specifications

• Thorough modification

P.13 in the previous

edition

Deletion of 1.4 Hardware Configuration

p.14 1.4 System Configuration

• Addition of SWEX-xxxSD-1 as extension probe

• Addition of descriptions about connector configurations

p.17 1.6.1 When using IE-V850E-MC-A on a standalone basis for performing software

debugging

• Addition and modification of descriptions

p.18 1.6.2 When performing hardware debugging with target system

• Addition and modification of descriptions

p.21 2.2 Pod Part Names and Functions

• Thorough modification

p.24 3.1.3 Insertion of PC interface board

• Addition and modification of descriptions

p.25 3.2 Connection to Target System

• Modification of descriptions in (1)

• Figure 3-1 Connection of Connector for Target Connection and Connector for

Emulator Connection divided according to target device

p.31 3.3.1 Power adapter connection

• Addition of description to Caution

p.32 3.3.4 Additional information

• Addition of description to procedure

p.33 3.4.1 Power-on procedure

• Modification of procedure

p.33 3.4.2 Power-off procedure

• Modification of procedure

p.34 Addition of CHAPTER 4 SHIPMENT SETTINGS

p.36 Addition of APPENDIX B REVISION HISTORY

The mark shows major revised points.

User’s Manual U14487EJ2V0UM

INTRODUCTION

Target Readers This manual is intended for users who design and develop application systems using

V850E1, V850E/MA1, V850E/MA2, V850E/SV2, V850E/IA1, and V850E/IA2

microcontrollers.

Purpose Debugging can be performed efficiently with these emulators (IE-V850E-MC, IE-

V850E-MC-A) connected to a dedicated option board when designing and developing

application systems using V850E1, V850E/MA1, V850E/MA2, V850E/SV2, V850E/IA1,

and V850E/IA2 microcontrollers.

The purpose of this manual is to describe the proper operation of the IE-V850E-MC

and IE-V850E-MC-A and their basic specifications.

Organization This manual is broadly divided into the following parts.

• Overview • Connection of parts

• Names and functions of parts • Shipment settings

How to Read This Manual It is assumed that the reader of this manual has general knowledge in the fields of

electrical engineering, logic circuits, and microcontrollers.

To learn about the basic specifications and operation

→Read this manual in the order listed in CONTENTS.

To learn the operation methods, command functions, etc., of the IE-V850E-MC or IE-

V850E-MC-A

→Read the user’s manual of the debugger (sold separately) that is used.

Conventions Note: Footnote for item marked with Note in the text

Caution: Information requiring particular attention

Remark: Supplementary information

Numeral representation: Binary … ×××× or ××××B

Decimal ... ××××

Hexadecimal ... ××××H

Prefix representing a power of 2 (address space, memory capacity):

K (kilo): 210 = 1024

M (mega):220 = 10242

Terminology The meanings of terms used in this manual are listed below.

Target device This is the device to be emulated.

Target system The system (user-built system) to be debugged. This includes the target program and hardware

configured by the user.

Emulation CPU Device that performs emulation of the target device in the IE-V850E-MC, IE-V850E-MC-A.

User’s Manual U14487EJ2V0UM 7

Product Name in This Manual In this manual, unless otherwise specified, the IE-V850E-MC-A is treated as the

representative model. When this manual is used as the IE-V850E-MC manual,

replace IE-V850E-MC-A with IE-V850E-MC.

For the functional differences between the IE-V850E-MC and the IE-V850E-MC-

A, refer to CHAPTER 1 OVERVIEW.

Related Documents When using this manual, refer to the following manuals.

The related documents (user’s manuals) indicated in this publication may include

preliminary versions. However, preliminary versions are not marked as such.

Documents Related to Development Tools (User’s Manuals)

Document Name Document Number

V850E1 Architecture U14559E

V850E/MA1 Hardware U14359E

V850E/MA2 Hardware U14980E

V850E/IA1 Hardware U14492E

V850E/IA2 Hardware U15195E

V850E/SV2 Hardware U16384E

IE-V850E-MC, IE-V850E-MC-A (In-Circuit Emulator) This manual

IE-703107-MC-EM1 (In-Circuit Emulator Option Board) U14481E

IE-703114-MC-EM1 (In-Circuit Emulator Option Board) To be prepared

IE-703116-MC-EM1 (In-Circuit Emulator Option Board) U14700E

IE-703166-MC-EM1 (In-Circuit Emulator Option Board) To be prepared

IE-V850E-MC-EM1-A (In-Circuit Emulator) To be prepared

IE-V850E-MC-EM1-B, IE-V850E-MC-MM2 (In-Circuit Emulator Option Board) U14482E

V850 SeriesTM Development Tools (Supporting

32-Bit OS) WindowsTM Based (Application Note)

Tutorial Guide U16544E

Operation U16053E

C Language U16054E

CA850 Ver.2.50 C Compiler Package

Assembly Language U16042E

PM plus Ver.5.10 U16559E

ID850 Ver.2.50 Integrated Debugger Operation Windows based U16217E

SM850 Ver.2.50 System Simulator Operation Windows based U16218E

Basics U13430E

Installation U13410E

RX850 Ver.3.13 or Later (Real-Time OS)

Technical U13431E

Basics U13773E

Installation U13774E

RX850 Pro Ver.3.13 (Real-Time OS)

Technical U13772E

RD850 (Task Debugger)Note U11158E

RD850 Ver.3.01 Task Debugger U13737E

RD850 Pro Ver.3.01 Task Debugger U13916E

AZ850 Ver.3.10 System Performance Analyzer U14410E

PG-FP4 Flash Memory Programmer U15260E

Note ID850 (Ver.1.31 only) supported

User’s Manual U14487EJ2V0UM

CONTENTS

CHAPTER 1 OVERVIEW ................................................................................................................. 10

1.1 Hardware Configuration .......................................................................................................11

1.2 Features.................................................................................................................................. 12

1.3 Function Specifications........................................................................................................ 13

1.4 System Configuration ........................................................................................................... 14

1.5 Contents in Carton ................................................................................................................ 15

1.6 Setup....................................................................................................................................... 17

1.6.1 When using the IE-V850E-MC-A on a stand-alone basis for performing software debugging ....17

1.6.2 When performing hardware debugging with target system ......................................................... 18

CHAPTER 2 PART NAMES AND FUNCTIONS........................................................................... 19

2.1 Main Unit Part Names and Functions.................................................................................. 20

2.2 Pod Part Names and Functions ........................................................................................... 21

CHAPTER 3 CONNECTION OF COMPONENTS ......................................................................... 23

3.1 Connection to Personal Computer ...................................................................................... 23

3.1.1 Overview of connection ...............................................................................................................23

3.1.2 Connection procedure .................................................................................................................23

3.1.3 Insertion of PC interface board.................................................................................................... 24

3.1.4 Connection of PC interface cable ................................................................................................24

3.2 Connection to Target System .............................................................................................. 25

3.3 Cable Connections................................................................................................................ 31

3.3.1 Power adapter connection........................................................................................................... 31

3.3.2 PC interface cable connection.....................................................................................................31

3.3.3 External logic probe connection ..................................................................................................32

3.3.4 Additional information ..................................................................................................................32

3.4 System Power-On and Power-Off ........................................................................................ 33

3.4.1 Power-on procedure .................................................................................................................... 33

3.4.2 Power-off procedure .................................................................................................................... 33

CHAPTER 4 SHIPMENT SETTINGS................................................................................................ 34

APPENDIX A DIMENSIONS ............................................................................................................ 35

APPENDIX B REVISION HISTORY..................................................................................................36

User’s Manual U14487EJ2V0UM 9

LIST OF FIGURES

Figure No. Title Page

1-1 System Configuration (QFP Package)...................................................................................................................14

1-2 Contents in Carton.................................................................................................................................................15

1-3 Accessories ...........................................................................................................................................................16

2-1 IE-V850E-MC-A .....................................................................................................................................................19

2-2 Main Unit ...............................................................................................................................................................20

2-3 Pod (Top View)......................................................................................................................................................21

2-4 Pod (Bottom View).................................................................................................................................................22

3-1 Connecting to Target System ................................................................................................................................25

3-2. Direction Marking for Pin 1 of Connector (Top View) ............................................................................................29

3-3 Connection of IE-V850E-MC-A to Target System .................................................................................................30

3-4 Power Adapter Connection....................................................................................................................................31

3-5 PC Interface Cable Connection .............................................................................................................................31

3-6 External Logic Probe Connection (Using IC Clip)..................................................................................................32

User’s Manual U14487EJ2V0UM

CHAPTER 1 OVERVIEW

The IE-V850E-MC-A and IE-V850E-MC are in-circuit emulators that are used to efficiently debug hardware and

software during the development of systems that employ the V850E1, V850E/MA1, V850E/MA2, or V850E/SV2, and

the V850E/IA1 or V850E/IA2, respectively.

They incorporate functions such as a break/trace function using events, a coverage function for program

performance evaluation, and a timer/counter function.

To perform debugging, the option board (sold separately) corresponding to the relevant device product must be

connected.

The IE-V850E-MC is an in-circuit emulator for VDD = 5.0 V.

The IE-V850E-MC-A is an in-circuit emulator for VDD = 3.3 V.

CHAPTER 1 OVERVIEW

User’s Manual U14487EJ2V0UM 11

1.1 Hardware Configuration

Note For further information, contact Daimaru Kogyo., Ltd.

Tokyo Electronic Components Division (TEL +81-3-3820-7112)

Osaka Electronic Components Division (TEL +81-6-6244-6672)

Caution Be aware that, depending on the operating frequency of the emulator, use of an extension

probe may cause abnormal operation.

Option board

IE-703107-MC-EM1

IE-703114-MC-EM1

IE-703116-MC-EM1

IE-703166-MC-EM1

The IE-V850E-MC-A can be used as an in-circuit

emulator of the V850E1, V850E/MA1, V850E/MA2,

V850E/SV2, V850E/IA1, and V850E/IA2 by

connecting these boards.

Extension probe

SC-×××SDNNote

SWEX-×××SD-1Note

General-purpose extension probe. Product of

TOKYO ELETECH CORPORATION.

PC interface board

IE-70000-PCI-IF

IE-70000-PCI-IF-A

IE-70000-CD-IF-A

These boards are used to connect the IE-V850E-

MC-A to a personal computer. These boards are

added into the expansion slot of a personal

computer.

IE-70000-PCI-IF: For PCI bus (discontinued)

IE-70000-PCI-IF-A: For PCI bus

IE-70000-CD-IF-A: For PCMCIA socket

Network module

(IE-70000-MC-SV3)

This module is used when a workstation controls

the IE-V850E-MC-A via EthernetTM.

Power adapter

(IE-70000-MC-PS-B)

AC adapter dedicated to NEC Electronics in-circuit

emulators.

In-circuit emulator (IE-V850E-MC-A)

Separately sold hardware

CHAPTER 1 OVERVIEW

User’s Manual U14487EJ2V0UM

1.2 Features

{Maximum operating frequency: 50 MHz (at VDD = 3.3 V, 5.0 V)

{Extremely lightweight and compact

{Higher equivalence with target device can be achieved by omitting buffer between signal cables

{The following pins can be masked

RESET, NMI, WAIT, HLDRQ

{The dimensions and environmental conditions for operation are as follows

Parameter Value

Maximum operating frequency 50 MHz

Supply voltage (DC) 5 V

Operating voltage (DC) VDD = 3.3 V (IE-V850E-MC-A), 5.0 V (IE-V850E-MC)

Power consumption 11 W (operating frequency: 50 MHz)Note

Height 56 mm

Length 353 mm

External dimensions

(Refer to APPENDIX A DIMENSIONS)

Width 90 mm

Weight 500 g

Operating temperature range 0 to 40°C

Storage temperature range 0 to 45°C

Ambient humidity range 10 to 80% RH

Note The power consumption is 11.4 W when the option board is connected to the IE-V850E-MC-A.

CHAPTER 1 OVERVIEW

User’s Manual U14487EJ2V0UM 13

1.3 Function Specifications

Item Specification

Internal ROM 1 MB (max.)Emulation memory capacity

External memory Note

Execution/pass detection (coverage memory capacity) 1 MB (max.)

Real-time execution function Go, Execution from cursor position, Automatic Go,

Execution up to cursor position, Restart, Return out

Program execution function

Non-real-time execution function Step-in, next over, slow-motion

Break function Event detection break, software break, forced break,

break via come function, break on condition met during

step execution, failsafe break

Trace condition All trace, section trace, qualify traceTrace function

Memory capacity 168 bits × 32 K frames

Other functions Mapping function, event function, coverage

measurement function, snapshot function, stub

function, register manipulation function, memory

manipulation function, time measurement function,

real-time RAM sampling function

Note External emulation memory is not mounted on the IE-V850E-MC-A. External emulation memory is

mounted on the separately-sold option board, so refer to the option board user’s manual.

Caution Some of the functions may not be supported depending on the debugger used.

CHAPTER 1 OVERVIEW

User’s Manual U14487EJ2V0UM

1.4 System Configuration

The system configuration when connecting the option board to the IE-V850E-MC-A, which is then connected to a

personal computer (PC-9800 series, PC/ATTM or compatible) is illustrated below.

The connector configuration varies depending on the target device. For details, refer to the user’s manual of the

option board.

Figure 1-1. System Configuration (QFP Package)

Remarks 1. <1> Personal computer (PC-9800 series, PC/AT or compatible)

<2> Debugger (sold separately), device file (available separately)

<3>PC interface board

(IE-70000-PCI-IF, IE-70000-PCI-IF-A, IE-70000-CD-IF-A: sold separately)

<4> PC interface cable (included)

<5> IE-V850E-MC-A (in-circuit emulator)

<6> Option board (sold separately)

<7> External logic probe (included with option board)

<8> Extension probe (SC-×××SDN, SWEX-×××SD-1: sold separately)

<9> Connector for emulator connection (YQPACK×××SD: included with option board)

<10>Connector for target connection (NQPACK×××SD: included with option board)

<11>Device mounting cover (HQPACKxxxSD: included with option board)

<12>Power adapter (IE-70000-MC-PS-B: sold separately)

<13>AC100 V power cable (sold separately: included with IE-70000-MC-PS-B)

<14>AC220 V power cable (sold separately: included with IE-70000-MC-PS-B)

2. The encircled portions show enlarged figures of the connectors for target connection.

<13>

<14> <12>

<6>

<7>

<4>

<3>

<1>, <2>

<8>

<10>

<9>

Target system

Device

Target

system

<9>

<10>

Target

system

<10>

<11>

CHAPTER 1 OVERVIEW

User’s Manual U14487EJ2V0UM 15

1.5 Contents in Carton

The carton of the IE-V850E-MC-A contains a main unit, guarantee card, packing list, and accessory bag.

Make sure that the accessory bag includes this manual and cables. In case of missing or damaged contents,

please contact an NEC Electronics sales representative or distributor.

Figure 1-2. Contents in Carton

<1> IE-V850E-MC-A × 1

<2> Accessory bag × 1

<3> Guarantee card × 1

<4> Packing list × 1

<2> Accessory bag

<3> Guarantee card

<4> Packing list

<1> IE-V850E-MC-A

CHAPTER 1 OVERVIEW

User’s Manual U14487EJ2V0UM

Check that the accessory bag contains this manual, an accessory list, and the following accessories.

(a) PC interface cable × 2 (for the IE-70000-PCI-IF, IE-70000-PCI-IF-A × 1, for the IE-70000-CD-IF-A × 1)

(b) Plastic spacer × 2 sets

(including 2 plastic screws and 2 washers)

Figure 1-3. Accessories

(a) PC interface cable (b) Plastic spacers (c) Nylon rivets

CHAPTER 1 OVERVIEW

User’s Manual U14487EJ2V0UM 17

1.6 Setup

The following two system configurations for the IE-V850E-MC-A are possible, depending on the purpose.

This section describes the setup procedure according to each purpose as follows.

Step Reference section

1.6.1 When using the IE-V850E-MC-A on a standalone basis for performing software debugging

(1) Connect interface board to PC 3.1 Connection to Personal Computer

Before connecting, make sure that the power of the PC is off (when using PCI bus).

(2) Connect option board Refer to the user’s manual of the option board

(3) Set clock operation mode of IE-V850E-MC-A Refer to the user’s manual of the option board

(4) Set CPU operating voltage range Refer to the user’s manual of the option board

Switch CPU operating voltage range.

(5) Connect cables 3.3 Cable Connections

Connect power source adapter and interface cable.

(6) Power up IE-V850E-MC-A 3.4 System Power-On and Power-Off

(7) Start debugger 3.4 System Power-On and Power-Off

CHAPTER 1 OVERVIEW

User’s Manual U14487EJ2V0UM

1.6.2 When performing hardware debugging with target system

Caution Before turning on the power of the target system, make sure that the power of the IE-V850E-

MC-A is turned on. If the target system is turned on while the IE-V850E-MC-A is off, the target

system or the IE-V850E-MC-A may be damaged.

(1) Connect interface board to PC 3.1 Connection to Personal Computer

Before connecting, make sure that the power of the PC is off (when using PCI bus).

(2) Connect option board Refer to the user’s manual of the option board

(3) Set clock operation mode of IE-V850E-MC-A Refer to the user’s manual of the option board

(4) Set CPU operating voltage range Refer to the user’s manual of the option board

Switch CPU operating voltage range.

(5) Connect cables 3.3 Cable Connections

Connect power source adapter and interface cable.

(6) Connect IE-V850E-MC-A to target system 3.2 Connection to Target System

There are two connection methods: connecting the connection tab of the option board to the target system

directly, and connecting the connection tab of the option board to the target system via an extension probe

(sold separately).

(7) Power up IE-V850E-MC-A, then target system 3.4 System Power-On and Power-Off

(8) Start debugger 3.4 System Power-On and Power-Off

User’s Manual U14487EJ2V0UM 19

CHAPTER 2 PART NAMES AND FUNCTIONS

This chapter describes the name and function of each part of the IE-V850E-MC-A, as well as switch settings.

Figure 2-1. IE-V850E-MC-A

Pod

Main unit

CHAPTER 2 PART NAMES AND FUNCTIONS

User’s Manual U14487EJ2V0UM

2.1 Main Unit Part Names and Functions

Figure 2-2. Main Unit

PC interface connector

Power jack

LED Power switch

(1) Power switch

This is the main power ON/OFF switch of the IE-V850E-MC-A.

The ON/OFF direction is printed on the chassis of the main part.

(2) Power jack

A power adapter (IE-70000-MC-PS-B: sold separately) is connected here.

(3) PC interface connector

The PC interface cable (included) is connected here.

(4) LED

Lit when the power is on, extinguished when the power is off.

CHAPTER 2 PART NAMES AND FUNCTIONS

User’s Manual U14487EJ2V0UM 21

2.2 Pod Part Names and Functions

Figure 2-3. Pod (Top View)

Emulation CPU

TRG

GND

LD2

TP3

LD1

FPGA

Direction of A1 pin on

emulation CPU

TP2

TP1 JP2

Memory

(1) Test pins

TP1: For shipment test

TP2: Ground

TP3: Ground

(2) JP2

The setting varies depending the option board to be set. For how to set, refer to the manual of the option board

(unless specified, use this jumper with the shipment setting. After shipment, the jumper is set with 1 and 2

shorted and 7 and 8 shorted).

(3) LD1, LD2

Name Status Description

On Switch of main unit = OnLD1 (red)

Off Switch of main unit = Off

On Power supply of target system = OnLD2 (amber)

Off Power supply of target system = Off

CHAPTER 2 PART NAMES AND FUNCTIONS

User’s Manual U14487EJ2V0UM

Figure 2-4. Pod (Bottom View)

(1) Option board connection pin

Connect this pin to the PGA socket on the option board (sold separately) side.

Option board connection pin

User’s Manual U14487EJ2V0UM 23

CHAPTER 3 CONNECTION OF COMPONENTS

The IE-V850E-MC-A enables debugging and programming of target devices by connecting several components

and configuring the desired system.

This chapter describes the various components and their connection. Read this chapter when connecting system

components. For the sequence of system configuration, refer to 1.6 Setup.

For details of software startup, refer to the user’s manual of the debugger that is used.

3.1 Connection to Personal Computer

3.1.1 Overview of connection

The IE-V850E-MC-A can use a personal computer (PC-9800 series, or PC/AT compatible) as the host machine.

The connection to each type of personal computer is described below.

(1) Desktop PC

When using a desktop PC, insert the following PC interface board in the external expansion slot of the desktop

PC and connect the computer to the IE-V850E-MC-A.

•IE-70000-PCI-IF, IE-70000-PCI-IF-A: For PCI bus (can also be used in a PC98-NX series and PC/AT or

compatible)

(2) Notebook-type personal computer

When using a notebook-type personal computer, insert the PC card interface (IE-70000-CD-IF-A: sold

separately) in the PC card slot of the computer and connect the computer to the IE-V850E-MC-A.

3.1.2 Connection procedure

(1) Powering off

Perform connection while the power of each unit is off.

If the power of the IE-V850E-MC-A or the PC is on, turn off the power first.

(2) PC interface board setting

When the IE-70000-PCI-IF and IE-70000-PCI-IF-A are shipped, an 8-bit connector board is premounted.

However, when the IE-V850E-MC-A is connected, this must be changed to a 32-bit connector board.

The 32-bit connector board is supplied with the IE-70000-PCI-IF and IE-70000-PCI-IF-A. For details, refer to the

IE-70000-PCI-IF, IE-70000-PCI-IF-A User’s Manual (to be prepared).

CHAPTER 3 CONNECTION OF COMPONENTS

User’s Manual U14487EJ2V0UM

3.1.3 Insertion of PC interface board

Mount the PC interface board on the PC following the instructions described in the user’s manual of the PC.

When connecting the IE-70000-PCI-IF or IE-70000-PCI-IF-A, turn off the power to the PC first.

3.1.4 Connection of PC interface cable

Connect the PC interface cable to the interface board connector.

CHAPTER 3 CONNECTION OF COMPONENTS

User’s Manual U14487EJ2V0UM 25

3.2 Connection to Target System

There are two connection methods: connecting the connection tab of the option board to the target system directly

and connecting the connection tab of the option board to the target system via an extension probe.

(1) Connect the connectors to the target system. The connection methods vary depending on the target device, so

connect as shown in the figures below.

Figure 3-1. Connecting to Target System (1/5)

(a) When the target device is the V850E/MA1 (QFP package), V850E/IA1, V850E/IA2 (GC package)

<1> Fix to the specified position by soldering.

<2> Insert.

<3> Fix using YQGUIDE.

Caution The direction of pin 1 is indicated on the NQPACKxxxSD. Refer to Figure 3-2.

YQGUIDE

YQPACKxxxSD

NQPACKxxxSD

<1>

<2>

<3> <3>

Target system

CHAPTER 3 CONNECTION OF COMPONENTS

User’s Manual U14487EJ2V0UM

Figure 3-1. Connecting to Target System (2/5)

(b) When the target device is the V850E/MA2

<1> Fix to the specified position by soldering.

<2> Insert.

<3> Fix using YQGUIDE.

<4> Insert the VP-V850E/MA1-MA2.

Caution The direction of pin 1 is indicated on the NQPACK100SD. Refer to Figure 3-2.

YQGUIDE

YQPACK100SD

NQPACK100SD

<1>

<2>

<3> <3>

Target system

<4>

VP-V850E/MA1-MA2

CHAPTER 3 CONNECTION OF COMPONENTS

User’s Manual U14487EJ2V0UM 27

Figure 3-1. Connecting to Target System (3/5)

YQGUIDE

YQPACK100SD

NQPACK100SD

<1>

<2>

<3> <3>

Target system

<4>

NEXB-2R100SD/RB

<1> Fix to the specified position by soldering.

<2> Insert.

<3> Fix using YQGUIDE.

<4> Insert the NEXB-2R100SD/RB.

Caution The direction of pin 1 is indicated on the NQPACK100RB. Refer to Figure 3-2.

CHAPTER 3 CONNECTION OF COMPONENTS

User’s Manual U14487EJ2V0UM

Figure 3-1. Connecting to Target System (4/5)

(d) When the target device is the V850E/MA1 (BGA package)

<1> Fix to the specified position by soldering.

(Align the misinsertion prevention pins of both the CSSOCKET and the target

system sides.)

<2> Insert LSPACK in CSSOCKET.

<3>, <4> Fix CSICE using YQGUIDE.

Caution The target connection connector is a guideless type. If a guide is required, use

the part whose part number is not suffixed with N.

LSPACK161A1413N01

CSSOCKET161A1413N01N

Note

CSICE161A1413N02

<1>

<2>

<3>

<4> <4>

YQGUIDE

CHAPTER 3 CONNECTION OF COMPONENTS

User’s Manual U14487EJ2V0UM 29

Figure 3-1. Connecting to Target System (5/5)

(e) When the target device is the V850E/SV2

<1> Fix to the specified position by soldering.

(Align the misinsertion prevention pins of both the BSSOCKET and the target

system sides.)

<2> Insert CSICE in BSSOCKET.

Figure 3-2. Direction Marking for Pin 1 of Connector (Top View)

Pin 1 direction

Connection tab

of option board

Connector for target connection

(NQPACK×××SD)

CSICE257B2014N01

BSSOCKET257B2014N01

<1>

<2>

Target system

CHAPTER 3 CONNECTION OF COMPONENTS

User’s Manual U14487EJ2V0UM

(2) Connect the connection tab of the option board to the target system directly or via the extension probe.

In either case, make sure that the pin 1 position (cutout corner of connector) is aligned.

The connection procedure is as follows.

Caution Be careful not to break or bend the pins of connector, socket, and extension probe when

connecting.

(a) When connecting to target system directly

<1> Turn off the power of the IE-V850E-MC-A (power switch OFF).

<2> Connect the IE-V850E-MC-A to the option board.

<3> Connect the connection tab of the option board to the target system.

(b) When connecting to target system via extension probe

<1> Turn off the power of the IE-V850E-MC-A (power switch OFF).

<2> Connect the IE-V850E-MC-A to the option board.

<3> Connect the extension probe to the option board.

<4> Connect the top of the extension probe to the target system.

Figure 3-3. Connection of IE-V850E-MC-A to Target System

When using

extension probe

When directly connecting

target system

Target system

CHAPTER 3 CONNECTION OF COMPONENTS

User’s Manual U14487EJ2V0UM 31

3.3 Cable Connections

3.3.1 Power adapter connection

Insert the cable of the power supply adapter (IE-70000-MC-PS-B: sold separately) to the power jack of the IE-

V850E-MC-A main unit.

Caution Use only the IE-70000-MC-PS-B for supplying power. Use of other power supplies may damage

the IE-V850E-MC-A due to differences in the power jack polarity, voltage, and power supply

capacitance.

Figure 3-4. Power Adapter Connection

Power jack

Power adapter (IE-70000-MC-PS-B)

3.3.2 PC interface cable connection

Connect the PC interface cable to the PC interface connector of the IE-V850E-MC-A main unit.

Figure 3-5. PC Interface Cable Connection

PC interface connector

PC interface cable

CHAPTER 3 CONNECTION OF COMPONENTS

User’s Manual U14487EJ2V0UM

3.3.3 External logic probe connection

When using the external logic probe, connect it to the option board connector.

For details, refer to the option board user’s manual.

3.3.4 Additional information

The IE-V850E-MC-A can perform real-time tracing of the emulation CPU bus cycle. In addition, an external logic

probe is included with the option board for the following three functions.

For details on its use, refer to the debugger user’s manual.

(1) Any eight signals can be traced in real time.

(2) Tracer start/stop is enabled using any eight signals.

(3) Break setting is enabled using any eight signals.

Cautions 1. Connect the external logic probe only to a TTL-level signal line. The high level and low level

cannot be detected correctly if connected to lines other than TTL-level signal lines. Note that

the sensor of the IE-V850E-MC-A and option board may be damaged by an excessive voltage

level.

2. When connecting the external logic probe, use a commercially available IC clip.

Procedure

(1) Turn off the power of the target system.

(2) Turn off the power of the IE-V850E-MC-A.

(3) Attach an IC clip to any device on the target system.

(4) Connect the external logic probe to the attached IC clip.

(5) Connect the GND of the external logic probe to the ground of the target system.

Figure 3-6. External Logic Probe Connection (Using IC Clip)

Target system External logic probe

IC clip

CHAPTER 3 CONNECTION OF COMPONENTS

User’s Manual U14487EJ2V0UM 33

3.4 System Power-On and Power-Off

After connecting the IE-V850E-MC-A and each system component (PC, target system, etc.), start up and shut

down the system using the following procedure.

3.4.1 Power-on procedure

Make sure that the IE-V850E-MC-A is correctly connected to the PC before powering on.

If the IE-V850E-MC-A is powered on using a procedure other than the following one, the IE-V850E-MC-A or the

target system may be damaged.

(1) Turn on the power switch of the IE-V850E-MC-A.

Set the power switch to “ON” after connecting the power adapter to the power jack of the IE-V850E-MC-A and

the plug to the power outlet.

(2) Turn on the power of the target system.

(3) Start the debugger.

3.4.2 Power-off procedure

(1) Terminate the debugger.

(2) Turn off the power switch of the target system.

(3) Turn off the power switch of the IE-V850E-MC-A.

User’s Manual U14487EJ2V0UM

CHAPTER 4 SHIPMENT SETTINGS

Item Setting Description

JP2

After shipment, the jumper is set with 1 and 2

shorted and 7 and 8 shorted.

The setting varies depending on the option board,

so for how to set, refer to the user’s manual of the

option board.

Unless specified in the user’s manual of the option

board, use the jumper with the shipment setting.

User’s Manual U14487EJ2V0UM 35

APPENDIX A DIMENSIONS

(Unit: mm)

353

55166

58.8

9927

132

Top View

Side View

Bottom View

User’s Manual U14487EJ2V0UM

APPENDIX B REVISION HISTORY

A history of the revisions up to this edition is shown below. “Applied to:” indicates the chapters to which the

revision was applied.

Edition Contents Applied to:

• Addition of V850E/MA2, V850E/SV2, and V850E/IA2 as target devices

• Addition of IE-70000-PCI-IF-A as corresponding PC interface board

• Modification of IE-V850E-MC-A shape

Throughout

1.1 Hardware Configuration

• Addition of IE-703166-MC-EM1 and IE-703114-MC-EM1 as option boards

• Addition of SWEX-xxxSD-1 as extension probe

1.3 Function Specifications

• Thorough modification

Deletion of 1.4 Hardware Configuration

1.4 System Configuration

• Addition of SWEX-xxxSD-1 as extension probe

• Addition of descriptions about connector configurations

1.6.1 When using IE-V850E-MC-A on a standalone basis for performing

software debugging

• Addition and modification of descriptions

1.6.2 When performing hardware debugging with target system

• Addition and modification of descriptions

CHAPTER 1 OVERVIEW

2.2 Pod Part Names and Functions

• Thorough modification

CHAPTER 2 PART NAMES

AND FUNCTIONS

3.1.3 Insertion of PC interface board

• Addition and modification of descriptions

3.2 Connection to Target System

• Modification of descriptions in (1)

• Figure 3-1 Connection of Connector for Target Connection and

Connector for Emulator Connection divided according to target device

3.3.1 Power adapter connection

• Addition of description to Caution

3.3.4 Additional information

• Addition of description to procedure

3.4.1 Power-on procedure

• Modification of procedure

3.4.2 Power-off procedure

• Modification of procedure

CHAPTER 3 CONNECTION

OF COMPONENTS

Addition of CHAPTER 4 SHIPMENT SETTINGS CHAPTER 4 SHIPMENT

SETTINGS

2nd edition

Addition of APPENDIX B REVISION HISTORY APPENDIX B REVISION

HISTORY