STD12NF06L STD12NF06L-1 N-channel 60V - 0.08 - 12A - DPAK - IPAK STripFETTM II Power MOSFET General features Type VDSSS RDS(on) ID STD12NF06L STD12NF06L-1 60V 60V <0.1 <0.1 12A 12A 3 3 2 1 Exceptional dv/dt capability Low gate charge DPAK 1 IPAK Description This Power MOSFET is the latest development of STMicroelectronics unique "Single Feature SizeTM" strip-based process. The resulting transistor shows extremely high packing density for low on-resistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility. Internal schematic diagram Applications Switching application Order codes Part number Marking Package Packaging STD12NF06LT4 D12NF06L DPAK Tape & reel STD12NF06L-1 D12NF06L IPAK Tube February 2007 Rev 6 1/14 www.st.com 14 Contents STD12NF06L Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2/14 ................................................ 8 STD12NF06L 1 Electrical ratings Electrical ratings Table 1. Absolute maximum ratings Symbol VDS VDGR VGS Parameter Value Unit Drain-source voltage (VGS = 0) 60 V Drain-gate voltage (RGS = 20K) 60 V 16 V Gate-source voltage ID Drain current (continuous) at TC = 25C 12 A ID Drain current (continuous) at TC=100C 8.5 A Drain current (pulsed) 48 A Total dissipation at TC = 25C 30 W Derating factor 0.2 W/C Peak diode recovery voltage slope 15 V/ns Single pulse avalanche energy 100 mJ -55 to 175 C Value Unit 5 C/W IDM (1) PTOT (2) dv/dt EAS (3) Tstg TJ Storage temperature Max. operating junction temperature 1. Pulse width limited by safe operating area 2. ISD 12A, di/dt 200A/s, VDS 40V, TJ TJMAX 3. Starting TJ = 25 oC, ID = 6A, VDD = 30V Table 2. Symbol Thermal data Parameter RthJC Thermal resistance junction-case Max RthJA Thermal resistance junction-ambient Max 100 C/W Tl Maximum lead temperature for soldering purpose 275 C 3/14 Electrical characteristics 2 STD12NF06L Electrical characteristics (TCASE=25C unless otherwise specified) Table 3. Symbol V(BR)DSS On/off states Parameter Drain-source breakdown voltage Test conditions ID = 25mA, VGS = 0 IDSS IGSS Gate body leakage current (VDS = 0) VGS = 20V VGS(th) Gate threshold voltage VDS= VGS, ID = 250A RDS(on) Static drain-source on resistance VGS = 10V, ID = 6A Symbol gfs (1) Ciss Coss Crss Qg Qgs Qgd Typ. Max. 60 1 10 A A 100 nA 2 V 0.08 0.10 0.10 0.12 Typ. Max. Unit VDS = Max rating, TC = 125C 1 VGS = 5V, ID = 6A Unit V VDS = Max rating Zero gate voltage drain current (VGS = 0) Table 4. Min. Dynamic Parameter Test conditions Forward transconductance VDS = 25V, ID = 6A Input capacitance Output capacitance Reverse transfer capacitance VDS = 25V, f = 1 MHz, VGS = 0 Total gate charge Gate-source charge Gate-drain charge Min. VDD = 48V, ID = 12A VGS = 5V 7 S 350 75 30 pF pF pF 7.5 2.5 3.0 10 nC nC nC Typ. Max. Unit 1. Pulsed: pulse duration=300s, duty cycle 1.5% Table 5. Symbol td(on) tr td(off) tf 4/14 Switching times Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions VDD = 30V, ID = 6A, RG = 4.7, VGS = 4.5V Figure 12 on page 8 Min. 10 35 20 13 ns ns ns ns STD12NF06L Electrical characteristics Table 6. Symbol ISD ISDM VSD(1) trr Qrr IRRM Source drain diode Parameter Test conditions Max Unit Source-drain current 12 A Source-drain current (pulsed) 48 A 1.5 V Forward on voltage ISD = 12A, VGS = 0 Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 12A, di/dt = 100A/s, VDD = 16V, TJ = 150C Min Typ. 50 65 2.5 ns C A Figure 14 on page 8 1. Pulsed: pulse duration=300s, duty cycle 1.5% 5/14 Electrical characteristics STD12NF06L 2.1 Electrical characteristics (curves) Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characteristics Figure 4. Transfer characteristics Figure 5. Transconductance Figure 6. Static drain-source on resistance 6/14 STD12NF06L Electrical characteristics Figure 7. Gate charge vs. gate-source voltage Figure 8. Figure 9. Normalized gate threshold voltage vs. temperature Capacitance variations Figure 10. Normalized on resistance vs. temperature Figure 11. Source-drain diode forward characteristics 7/14 Test circuit 3 STD12NF06L Test circuit Figure 12. Switching times test circuit for resistive load Figure 13. Gate charge test circuit Figure 14. Test circuit for inductive load Figure 15. Unclamped Inductive load test switching and diode recovery times circuit Figure 16. Unclamped inductive waveform 8/14 STD12NF06L 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 9/14 Package mechanical data STD12NF06L TO-251 (IPAK) MECHANICAL DATA mm DIM. MIN. inch MAX. MIN. A 2.2 TYP. 2.4 0.086 0.094 A1 0.9 1.1 0.035 0.043 A3 0.7 1.3 0.027 0.051 B 0.64 0.9 0.025 0.031 B2 5.2 5.4 0.204 0.212 B3 TYP. MAX. 0.85 B5 0.033 0.3 0.012 B6 0.95 C 0.45 C2 0.48 D 6 E 6.4 6.6 0.037 0.6 0.017 0.023 0.6 0.019 0.023 6.2 0.236 0.244 0.252 0.260 G 4.4 4.6 0.173 0.181 H 15.9 16.3 0.626 0.641 L 9 9.4 0.354 0.370 L1 0.8 1.2 0.031 0.047 L2 0.8 1 0.031 0.039 A1 C2 A3 A C H B B6 = 1 = 2 G = = = E B2 = 3 B5 L D B3 L2 L1 0068771-E 10/14 STD12NF06L Package mechanical data DPAK MECHANICAL DATA mm. inch DIM. MIN. A A1 A2 B b4 C C2 D D1 E E1 e e1 H L (L1) L2 L4 R V2 TYP 2.2 0.9 0.03 0.64 5.2 0.45 0.48 6 MAX. MIN. 2.4 1.1 0.23 0.9 5.4 0.6 0.6 6.2 0.086 0.035 0.001 0.025 0.204 0.017 0.019 0.236 6.6 0.252 5.1 6.4 0.260 0.173 0.368 0.039 2.8 0.8 0.181 0.397 0.110 0.031 1 0.023 0.2 0 0.094 0.043 0.009 0.035 0.212 0.023 0.023 0.244 0.185 0.090 4.6 10.1 0.6 MAX. 0.200 4.7 2.28 4.4 9.35 1 TYP. 0.039 0.008 8 0 8 0068772-F 11/14 Packaging mechanical data 5 STD12NF06L Packaging mechanical data DPAK FOOTPRINT All dimensions are in millimeters TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B DIM. mm MIN. MAX. A0 6.8 7 0.267 0.275 B0 10.4 10.6 0.409 0.417 B1 12/14 inch MIN. MAX. 12.1 0.476 1.6 0.059 0.063 D 1.5 D1 1.5 E 1.65 1.85 F 7.4 7.6 0.291 0.299 K0 2.55 2.75 0.100 0.108 P0 3.9 4.1 0.153 0.161 P1 7.9 8.1 0.311 0.319 P2 1.9 2.1 0.075 0.082 R 40 W 15.7 0.059 0.065 0.073 1.574 16.3 0.618 0.641 MAX. MIN. 330 1.5 C 12.8 D 20.2 G 16.4 N 50 T TAPE MECHANICAL DATA inch MAX. 12.992 0.059 13.2 0.504 0.520 18.4 0.645 0.724 0.795 1.968 22.4 0.881 BASE QTY BULK QTY 2500 2500 STD12NF06L 6 Revision history Revision history Table 7. Revision history Date Revision Changes 09-Sep-2004 4 Complete document 08-Aug-2006 5 New template, no content change 19-Feb-2007 6 Typo mistake on page 1 13/14 STD12NF06L Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 14/14