SMJ 500-3A The Communications Edge TM Preliminary Product Information Quad-Diode Mixer Product Features * * * * * Functional Diagram Input IP3 +11 dBm RF Freq 2 - 500 MHz LO Freq 2 - 500 MHz IF Freq DC - 500 MHz LO Drive Level +3 dBm 6 5 4 1 2 3 Function Ground IF RF Ground LO Pin No. 1 2 3 4-5 6 Specifications Parameters RF Frequency LO Frequency IF Frequency Units Minimum MHz MHz MHz 2 2 DC Typical dB 6.0 L-R Isolation L-I Isolation dB dB 32 30 dBm dBm +11 +3 dB dB dB 11 14 11 RF - Return Loss LO - Return Loss IF - Return Loss Comments 500 500 500 SSB Conversion Loss IIP3 LO Drive Maximum Test conditions unless otherwise noted 1. Tested in a 50 Ohm System, low Side LO. Recommended Maximum Rating Parameters Operating Case Temperature Storage Temperature RF Input Power at 25C (continuous) Rating -40 to +70 C -65 to +100 C +10 dBm Ordering Information Part No. SMJ 500-3A SMJ 500-3A-PCB Description Diode Mixer (Available in Tape & Reel) Fully Assembled Application Circuit This document contains information on a new product. Specifications and information are subject to change without notice WJ Communications, Inc * Phone 1-800-WJ1-4401 * FAX: 408-433-5649 * e-mail: sales@wj.com * Web site: www.wj.com May 2001 SMJ 500-3A Quad-Diode Mixer The Communications Edge TM Preliminary Product Information This document contains information on a new product. Specifications and information are subject to change without notice WJ Communications, Inc * Phone 1-800-WJ1-4401 * FAX: 408-433-5649 * e-mail: sales@wj.com * Web site: www.wj.com May 2001