AZ8222 SUBMINIATURE ULTRA-SENSITIVE DIP RELAY FEATURES * * * * * * * * * * * Low profile for compact board spacing DC coils to 48VDC Bifurcated crossbar contacts Ultra-sensitivity, 84mW pickup Life expectancy to 100 million operations High switching capacity, 60W, 125VA Fits standard 16 pin IC socket Epoxy sealed for automatic wave soldering and cleaning Meets FCC Part 68.302 1500V lightning surge Meets FCC Part 68.304 1000V dielectric UL, CUR file E43203 CONTACTS GENERAL DATA Arrangement DPDT (2 Form C) Ratings Resistive load: Max. switched power: 60W or 125VA Max. switched current: 2A Max. switched voltage: 120VDC or 240VAC Rated Load UL 2A at 30VDC 1A at 125VAC Life Expectancy Mechanical Electrical Minimum operations 1 x 108 1 x 105 at 2A, 30VDC Res. Operate Time (max.) 7ms at nominal coil voltage Release Time (max.) 4ms at nominal coil voltage (with no coil suppression) Material Silver nickel, gold plated Dielectric Strength 1500Vrms contact to coil (at sea level for 1 min.) 1000Vrms between open contacts 1500Vrms contact set to contact set Resistance <100 milliohms max (at 10mA, 30mV) Insulation Resistance 1000 megohms min. at 20C, 500VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage -40C (-40F) to 70C (158F) standard -40C (-40F) to 80C (176F) sensitive -40C (-40F) to 85C (185F) ultra-sensitive -40C (-40F) to 105C (221F) COIL Power At Pickup Voltage (typical) Storage 180mW standard 100mW sensitive 84mW ultra-sensitive Vibration 1.5mm DA at 10-55 Hz Max. Continuous Dissipation 1.2W at 20C (68F) Shock 20 g Temperature Rise 34C (61F) standard 23C (41F) sensitive 19C (34F) ultra-sensitive Enclosure P.B.T. polyester Terminals Tinned copper alloy Max. Solder Temp. 270C (518F) Max. Solder Time 5 seconds Max. Solvent Temp. 80C (176F) 1. All values at 20C (68F). Max. Immersion Time 30 seconds 2. Relay may pull in with less than "Must Operate" value. Weight (approx.) 5 grams Temperature Max. 105C (221F) NOTES 3. Other coil resistances and sensitivities available upon request. 4. Specifications subject to change without notice. 2/09/16 AZ8222 RELAY ORDERING DATA STANDARD COIL SPECIFICATIONS Coil Resistance 10% Must Operate VDC ORDER NUMBER Nominal Coil VDC Max. Continuous VDC 3 4.5 30 2.3 4.5 5 6 9 12 15 24 48 6.0 8.0 10.0 14.5 18.5 22.0 35.5 56.0 63 90 130 280 450 625 1600 4000 3.2 3.8 4.5 6.8 9.0 11.3 18.0 36.0 Nominal Coil VDC Max. Continuous VDC 3 6.0 45 2.3 4.5 9.0 101 3.2 AZ8222-2C-4.5DSE 5 10.0 125 3.8 AZ8222-2C-5DSE 6 12.0 180 4.5 AZ8222-2C-6DSE 9 18.0 405 6.8 AZ8222-2C-9DSE 12 24.0 720 9.0 AZ8222-2C-12DSE 15 30.0 1125 11.3 AZ8222-2C-15DSE 24 48.0 2880 18.0 AZ8222-2C-24DSE AZ8222-2C-3DME AZ8222-2C-4.5DME AZ8222-2C-5DME AZ8222-2C-6DME AZ8222-2C-9DME AZ8222-2C-12DME AZ8222-2C-15DME AZ8222-2C-24DME AZ8222-2C-48DME SENSITIVE COIL SPECIFICATIONS Coil Resistance 10% Must Operate VDC ORDER NUMBER AZ8222-2C-3DSE ULTRA-SENSITIVE COIL SPECIFICATIONS* Nominal Coil VDC Max. Continuous VDC 3 Coil Resistance 10% Must Operate VDC ORDER NUMBER 7.0 60 2.4 4.5 10.4 135 3.2 AZ8222-2C-3DSSE AZ8222-2C-4.5DSSE 5 11.5 167 4.0 AZ8222-2C-5DSSE 6 13.8 240 4.8 AZ8222-2C-6DSSE 9 20.8 540 7.2 AZ8222-2C-9DSSE 12 27.7 960 9.6 AZ8222-2C-12DSSE 15 34.6 1500 12.0 AZ8222-2C-15DSSE 24 55.2 3840 19.2 AZ8222-2C-24DSSE *Contact to contact dielectric strength is 500Vrms. MECHANICAL DATA 0.394MAX (10.0) 0.795MAX (20.2) 8X O0.035 (O0.9) 0.453MAX (11.5) 0.047 (1.2) 0.300 (7.62) 0.118 (3.0) 0.300 (7.62) 0.500 (12.7) 0.700 (17.78) PCB Layout 0.047 (1.2) 0.016 (0.4) 0.024 (0.6) 0.300 (7.62) 0.300 (7.62) 0.500 (12.7) 0.700 (17.78) (Viewed toward bottom) Wiring Diagram 1 4 6 8 16 13 1 9 Dimensions in inches with metric equivalents in parentheses. Tolerance: .010" 2/09/16