www.tracopower.com Page 1
Ordercode Input voltage Output voltage Output current max. Efficiency typ.
TEM 2-0511 5 VDC 400 mA 50 %
TEM 2-0512 5 VDC ± 10% 12 VDC 165 mA 54 %
TEM 2-0521 ± 12 VDC ± 80 m A 53 %
TEM 2-0522 ± 15 VDC ± 65 m A 51 %
TEM 2-1211 5 VDC 400 mA 50 %
TEM 2-1212 12 VDC ± 10% 12 VDC 165 mA 56 %
TEM 2-1221 ± 12 VDC ± 80 m A 59 %
TEM 2-1222 ± 15 VDC ± 65 m A 59 %
TEM 2-2411 5 VDC 400 mA 51 %
TEM 2-2412 24 VDC ± 10% 12 VDC 165 mA 61 %
TEM 2-2421 ± 12 VDC ± 80 m A 61 %
TEM 2-2422 ±15 VDC ± 60 mA 61 %
Features
DC/DC Converter
TEM 2 Series 2 Watt
Models
24–Pin DIP Plastic Package
Tightly regulated Output
Ve ry low Output Noise
Short-Circuit Protection
Internal Filter
Industry Standard Pinout
2 Year Product Warranty
The TEM-2 series is a family of isolated dc/dc converters in a
DIP-24 package. They of fer tight line/ load regulation and 500
VDC I/O-isolation. Standard features include an internal filter to
reduce reflected input ripple current and to guarantee low output
noise. This product series provides a cost effective solution by
many industrial or consumer electronics applications.
www.tracopower.com Page 2
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications
Input current (no load) 5 Vin models 80 mA typ.
12 Vin models 40 mA typ.
24 Vin models 20 mA typ.
Input current (full load) 5 Vin models 770 mA typ.
12 Vin models 300 mA typ.
24 Vin models 145 mA typ.
Surge voltage (1 sec. max.) 5 Vin models 7.5 VDC
12 Vin models 15.0 VDC
24 Vin models 30.0 VDC
Input filter Pi-Filter
Output Specifications
Voltage set accuracy ± 3 %
Regulation – Input variation Vin min. to Vin max. ± 0.3 % max.
– Load variation 10 – 100 %
– single output models ± 0.5 % max.
– dual output models balanced load ± 1.0 % max.
– dual output models un balanced load ± 3.0 % max.
Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max.
Temperature coefficient ± 0.02 % / °C
Output current limitation > 120% Iout max., constant current
Short circuit protection indefinite
Capacitive load – single output models 470 µF max.
– single output models 220 µF max.
General Specifications
Temperature ranges – Operating – 25 °C ... + 70 °C
5VDC output models: – 25 °C ... + 60 °C
– Case + 95 °C max.
– Storage – 40 °C ... + 125 °C
Humidity (non condensing) 95 % rel H max.
Reliability , calculated MTBF (MIL-HDBK-217 E) > 800’000 h @ + 25 °C
Isolation voltage Input/Output 500 VDC
Isolation capacity Input/Output 100 pF typ
Isolation resistance Input/Output (500 VDC) > 1‘000 M Ohm
Switching frequency 80 kHz typ.
DC/DC Conver ter
TEM 2 Series 2 Watt
Page 3
Specifications can be changed without notice
Outline Dimensions mm (inches)
Jenatschstrasse 1 CH-8002 Zurich Switzerland
Tel. +41-1284 2911 Fax +41-1201 1168 e-mail: sales@traco.ch internet: http://www.tracopower.com
Pin-Out
Pin Single Dual
1+Vin (Vcc) +Vin (Vcc)
2No function –Vout
3No function Common
10 –Vout Common
11 +Vout +Vout
12 –Vin (GND) –Vin (GND)
13 –Vin (GND) –Vin (GND)
14 +Vout +Vout
15 –Vout Common
22 No function Common
23 No function –Vout
24 +Vin (Vcc) +Vin (Vcc)
Rev. 11/00
Physical Specifications
Case material non conductive plastic (UL 94V-0 rating)
Weight 12 g (0.42 oz)
Soldering temperature max. 260 °C / 10 sec.
DC/DC Conver ter
TEM 2 Series 2 Watt
( ) = inches
Pin diameter ø 0.5 ±0.05 (0.02) ±0.002
Tolerances ±0.5 (0.01)
2.0
(0.079)
23
24 22
123
10.0
(0.394)
3.8
32.0
(1.26)
(0.1) (0.1)
2.54
(0.1) (0.1)
10 11 12
15 14 13
27.94
(1.1)
17.78
(0.7)
2.54 2.542.54
(0.15)
15.24
(0.394)
20.0
(0.394)
2.4
(0.094)
Bottom view