2300 SERIES
MICRO-DIP PRINTED
CIRCUIT BOARD SWITCHES
An EECO innovation, the 2300 Series MICRO-
DIP® family includes the industry’s only double
pole rotary DIP switch.
Ideal for CMOS applications, the 2300 Series double
pole switch offers a unique output arrangement in
which all four bits are always connected to one of
the two commons, allowing the use of a single pull-
up resistor instead of 4 as required by conventional
DIP switches. The 2300 Series includes 10 and 16
position double pole models, plus a 10 single pole
right angle version. The double pole switches are
available with process seals for wave soldering, and
all 2300 Series are color coded for easy
identification. The 2300 Series is covered by
EECO’s exclusive Lifetime Warranty.
All 2300 Series products are Lead-Free and fully
RoHS compliant.
SPECIFICATIONS
MECHANICAL
No. of Switching Positions 10 & 16
Life 10,000 Detents at +250C
Rotational Torque (Initial) 1.0 - 2.5 Inch/Ounces
Terminal Strength Pull 3 Pounds, Push 3 Pounds, for 15 Seconds
Weight 0.03 Oz (.85 Gr.).
ELECTRICAL
Maximum Electrical Current, Non-Switching 1A
Maximum Rated Load, Switching 100 mA at 5 VDC Resistive
Contact Resistance (Initial) 100 m Maximum
Insulation Resistance 1,000 M Minimum At 100 VDC
Dielectric Withstanding Voltage 250 VAC (RMS)
ENVIRONMENTAL
Operating Temperature -250C To +850C
Storage Temperature -550C To +1000C
Seal (DP Models) Top: Removable Plastic
Bottom: Epoxy
MATERIALS
Housing and Base Glass Reinforced 6/6 Nylon, UL 94 V0
Contact Copper Alloy Base, Gold Over Nickel Plate
Terminal Matte Tin With Whisker Inhibitors Over Nickel Plate
LEAD-FREE!