OSLON SSL Ceramic package - 80 radiation pattern Lead (Pb) Free Product - RoHS Compliant LCW CQ7P.EC Released Besondere Merkmale * Gehausetyp: SMD Keramik Gehause mit Silikonverguss und Linse * Typischer Lichtstrom: 94 lm bei 350 mA und bis zu 161 lm bei 700 mA (4000 K) * Besonderheit des Bauteils: Kompakte Lichtquelle fur platzsparende Designs * Farbtemperatur: 2700 K bis 5000 K * Farbwiedergabeindex: 82 (typ.) * Abstrahlwinkel: 80 * Typischer optischer Wirkungsgrad: 84 lm/W bei 350 mA (4000 K) * Gruppierungsparameter: Lichtstrom, Farbort, Durchlassspannung * Lotmethode: Reflow Loten * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 12-mm Gurt mit 600/Rolle, o180 mm * ESD-Festigkeit: ESD-sicher bis 8 kV nach JESD22-A114-D * Erweiterte Korrosionsfestigkeit: Details siehe Seite 16 Features * package: SMD ceramic package with silicon resin with lens * typical Luminous Flux: 94 lm at 350 mA and up to 161 lm at 700 mA (4000 K) * feature of the device: small size high-flux LED for slim designs * typ. color temperature: 2700 K to 5000 K * color reproduction index: 82 (typ.) * viewing angle: 80 * typical optical efficiency: 84 lm/W at 350 mA (4000 K) * grouping parameter: luminous flux, color coordinates, forward voltage * soldering methods: reflow soldering * preconditioning: acc. to JEDEC Level 2 * taping: 12-mm tape with 600/reel, o180 mm * ESD-withstand voltage: up to 8 kV acc. to JESD22-A114-D * Superior Corrosion Robustness: details see page 16 Anwendungen * Lampen- und Leuchten-Retrofits * Spot-Lichtquellen * Schreibtischleuchten * Akzentbeleuchtung * Einbau-Deckenleuchten * Ladenbeleuchtung * Der Hersteller ubernimmt keine Haftung fur Applikationen mit hoher Luftfeuchte (beispielsweise Auenbeleuchtung) Applications * Residential retrofits & fixtures * Spot lights * Task lights * Accent lights * Professional downlights 2011-07-25 * * 1 Shop lighting The manufacturer disclaims all Liability for applications in high humidity levels at it may appear in outdoor applications LCW CQ7P.EC Released Bestellinformation Ordering Information Typ Type Farbtemperatur color temperature Lichtstrom Lichtstarke 1) Seite 23 2) Seite 23 Luminous Flux1) page 23 IF = 350 mA V(lm) Luminous Intensity2) page 23 Bestellnummer Ordering Code IF = 350 mA IV (cd) LCW CQ7P.EC-KRKT-5U8X-1 LCW CQ7P.EC-KQKS-5U8X-1 2700 K 82.0 ... 104.2 76.3 ... 97.0 52.0 (typ.) 48.5 (typ.) Q65111A0765 on request LCW CQ7P.EC-KSKU-5R8T-1 LCW CQ7P.EC-KRKT-5R8T-1 3000 K 89.2 ... 112.0 82.0 ... 104.2 56.0 (typ.) 52.0(typ.) Q65111A0760 Q65111A0763 LCW CQ7P.EC-KSKU-5O8Q-1 LCW CQ7P.EC-KRKT-5O8Q-1 3500 K 89.2 ... 112.0 82.0 ... 104.2 56.0 (typ.) 52.0(typ.) Q65111A0757 Q65111A0764 LCW CQ7P.EC-KSKU-5L7N-1 LCW CQ7P.EC-KRKT-5L7N-1 4000 K 89.2 ... 112.0 82.0 ... 104.2 56.0 (typ.) 52.0(typ.) Q65111A0756 Q65111A0758 LCW CQ7P.EC-KTLP-5J7K-1 LCW CQ7P.EC-KSKU-5J7K-1 4500 K 97.0... 121.0 89.2 ... 112.0 61.0 (typ.) 56.0 (typ.) Q65111A0749 Q65111A0754 LCW CQ7P.EC-KTLP-5H7I-1 LCW CQ7P.EC-KSKU-5H7I-1 5000 K 97.0... 121.0 89.2 ... 112.0 61.0 (typ.) 56.0 (typ.) Q65111A0783 Q65111A0751 2011-07-25 2 LCW CQ7P.EC Released Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 11 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LCW CQ7P.EC-KRKT-5U8X-1 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen KR, KS oder KT enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Farbortgruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Farbortgruppe geliefert. Z.B.: LCW CQ7P.EC-KRKT-5U8X-1 bedeutet, dass auf dem Gurt nur eine der Farbortgruppen -5U bis -8X enthalten ist (siehe Seite 6 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Farbortgruppen nicht bestellt werden. Gleiches gilt fur die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Durchlassspannungsgruppe geliefert. Z.B.: LCW CQ7P.EC-KRKT-5U8X-1 bedeutet, dass nach Durchlassspannung gruppiert wird. Auf einem Gurt ist nur eine der Durchlasspannungsgruppen -3, -4 oder -5 enthalten (siehe Seite 11 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Durchlassspannungsgruppen nicht direkt bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 11 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g.LCW CQ7P.EC-KRKT-5U8X-1means that only one group KR, KS or KT will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where chromaticity coordinate groups are measured and binned, single chromaticity coordinate groups will be shipped on any one reel. E.g. LCW CQ7P.EC-KRKT-5U8X-1 means that only 1 chromaticity coordinate group -5U to -8X will be shippable (see page 6 for explanation). In order to ensure availability, single chromaticity coordinate groups will not be orderable. In a similar manner for LED, where forward voltage groups are measured and binned, single forward voltage groups will be shipped on any one reel. E.g. LCW CQ7P.EC-KRKT-5U8X-1 means that only 1 forward voltage group -3, -4 or -5 will be shippable. In order to ensure availability, single forward voltage groups will not be orderable(see page 11 for explanation). 2011-07-25 3 LCW CQ7P.EC Released Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebstemperatur Operating temperature range Top - 40 ... + 110 C Lagertemperatur Storage temperature range Tstg - 40 ... + 110 C Sperrschichttemperatur Junction temperature Tj 125 C (min.) IF (max.) IF 100 800 mA mA mA Durchlassstrom Forward current (TS=25C) Stostrom Surge current t 50 ms, D = 0.016, TS=25C IFM 2000 Sperrspannung Reverse voltage (TS=25C) VR not designed for V reverse operation 2011-07-25 4 LCW CQ7P.EC Released Kennwerte Characteristics (TS = 25 C) Bezeichnung Parameter Symbol Symbol Wert Value Farbkoordinate x nach CIE 19313) Seite 23 (typ.) Chromaticity coordinate x acc. to CIE 19313) page 23 IF = 350 mA x 0.42 - Farbkoordinate y nach CIE 19313) Seite 23 (typ.) Chromaticity coordinate y acc. to CIE 19313) page 23 IF = 350 mA y 0.40 - Farbtemperatur 2) Seite 23) Color temperature 2) page 23 IF = 350 mA (min.) T 2700 K (max.) T 5000 K (typ.) 2 80 Durchlassspannung 4) Seite 23) Forward voltage4) page 23 IF = 350 mA (min.) (typ.) (max.) VF VF VF 2.75 3.2 3.5 Sperrstrom Reverse current (max.) IR Abstrahlwinkel bei 50 % V (Vollwinkel) Viewing angle at 50 % V Warmewiderstand Thermal resistance Sperrschicht/Lotpad Junction/solder point Rth JS Rth JS (typ.) (max.) *Rth(max) basiert auf statistischen Werten Rth(max) is based on statistic values 2011-07-25 5 Einheit Unit Grad deg. V V V not designed for reverse operation A 7 9.4* K/W K/W LCW CQ7P.EC Released Farbortgruppen3) Seite 23 3) page 23 Chromaticity Coordinate Groups 0.56 Cy 0.54 0.52 0.9 0.50 520 530 Cy 0.8 0.48 540 510 0.46 550 0.7 0.44 560 0.6 500 0.5 0.4 E 0.3 490 0.38 0 8 7 6 5 4500 K 5000 K 0.36 0.32 2700 K 4000 K 0.40 480 470 460 450 0.1 0 580 590 600 610 620 630 0.34 0.2 3000 K 3500 K 0.42 570 7 6 5 + H I J K L M N O P Q T UV RS WX 0.30 0.28 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Cx 0.26 0.48 0.50 0.46 0.42 0.44 0.38 0.40 0.36 0.32 0.22 0.34 0.24 Cx OHA04327 2011-07-25 6 LCW CQ7P.EC Released Farbtemperatur 2700 K Color temperature 2700K Gruppe Group 5U 6U 7U 8U 5V 6V 2011-07-25 Cx Cy 0.437 0.389 0.442 0.398 Gruppe Group 7V Cx Cy 0.453 0.409 0.458 0.418 Gruppe Group 8W Cx Cy 0.464 0.420 0.469 0.429 0.448 0.400 0.464 0.420 0.475 0.430 0.443 0.391 0.459 0.410 0.470 0.421 0.442 0.398 0.447 0.408 8V 0.458 0.418 0.462 0.427 5X 0.454 0.393 0.459 0.402 0.453 0.409 0.469 0.429 0.465 0.404 0.448 0.400 0.464 0.420 0.459 0.394 0.447 0.408 0.451 0.417 5W 0.448 0.392 0.453 0.401 6X 0.459 0.402 0.464 0.412 0.458 0.418 0.459 0.402 0.470 0.413 0.453 0.409 0.454 0.393 0.465 0.404 0.451 0.417 0.456 0.426 6W 0.453 0.401 0.459 0.410 7X 0.464 0.412 0.470 0.421 0.462 0.427 0.464 0.412 0.476 0.423 0.458 0.418 0.459 0.402 0.470 0.413 0.443 0.391 0.448 0.400 6W 0.453 0.401 0.459 0.410 8X 0.4697 0.4211 0.4750 0.4304 0.453 0.401 0.464 0.412 0.4758 0.4225 0.448 0.392 0.459 0.402 0.4697 0.4211 0.448 0.400 0.459 0.410 0.453 0.409 7W 0.464 0.420 0.459 0.410 0.470 0.421 0.453 0.401 0.464 0.412 7 LCW CQ7P.EC Released Farbtemperatur 3000 K Color temperature 3000 K Gruppe Group 5R 6R 7R 8R Cx Cy 0.415 0.381 0.419 0.390 Gruppe Group 5S Cx Cy 0.422 0.384 0.426 0.393 Gruppe Group 5T Cx Cy 0.430 0.387 0.434 0.396 0.426 0.393 0.434 0.396 0.442 0.398 0.422 0.384 0.430 0.387 0.437 0.389 0.419 0.390 0.422 0.399 6S 0.426 0.393 0.430 0.402 6T 0.434 0.396 0.439 0.405 0.430 0.402 0.439 0.405 0.447 0.408 0.426 0.293 0.434 0.396 0.442 0.398 0.422 0.399 0.426 0.408 7S 0.430 0.402 0.435 0.411 7T 0.439 0.405 0.443 0.414 0.435 0.411 0.443 0.414 0.451 0.417 0.430 0.402 0.439 0.405 0.447 0.408 0.426 0.408 0.430 0.417 8S 0.435 0.411 0.439 0.420 8T 0.443 0.414 0.447 0.423 0.439 0.420 0.447 0.423 0.456 0.426 0.435 0.411 0.443 0.414 0.451 0.417 Cx Cy Cx Cy Farbtemperatur 3500 K Color temperature 3500 K Gruppe Group 5O 6O 7O 8O 2011-07-25 Cx Cy 0.389 0.369 0.392 0.377 Gruppe Group 5P 0.398 0.373 0.401 0.381 Gruppe Group 5Q 0.406 0.377 0.410 0.386 0.401 0.381 0.410 0.386 0.419 0.390 0.398 0.373 0.406 0.377 0.415 0.381 0.392 0.377 0.394 0.385 6P 0.401 0.381 0.404 0.390 6Q 0.410 0.386 0.413 0.394 0.404 0.390 0.413 0.394 0.422 0.399 0.401 0.381 0.410 0.386 0.419 0.390 0.394 0.385 0.397 0.393 7P 0.404 0.390 0.407 0.398 7Q 0.413 0.394 0.416 0.403 0.407 0.398 0.416 0.403 0.426 0.408 0.404 0.390 0.413 0.394 0.422 0.399 0.397 0.393 0.400 0.401 8P 0.407 0.398 0.410 0.406 8Q 0.416 0.403 0.420 0.412 0.410 0.408 0.420 0.412 0.430 0.417 0.407 0.398 0416 0.403 0.426 0.408 8 LCW CQ7P.EC Released Farbtemperatur 4000 K Color temperature 4000 K Gruppe Group 5L 6L 7L Cx Cy 0.367 0.358 0.369 0.368 Gruppe Group 5M Cx Cy 0.375 0.362 0.377 0.373 Gruppe Group 5N Cx Cy 0.382 0.367 0.385 0.376 0.377 0.373 0.385 0.378 0.393 0.383 0.375 0.362 0.382 0.367 0.390 0.372 0.369 0.368 0.371 0.378 6M 0.377 0.373 0.380 0.383 6N 0.385 0.378 0.388 0.388 0.380 0.383 0.388 0.388 0.397 0.393 0.377 0.373 0.385 0.376 0.393 0.383 0.371 0.378 0.374 0.387 7M 0.380 0.383 0.383 0.393 7N 0.388 0.388 0.392 0.399 0.383 0.393 0.392 0.399 0.401 0.404 0.380 0.383 0.388 0.388 0.397 0.393 Farbtemperatur 4500 K Color temperature 4500 K Gruppe Group 5J 6J 7J 2011-07-25 Cx Cy 0.351 0.347 0.352 0.356 0.361 Gruppe Group Cx Cy 0.359 0.352 0.361 0.362 0.362 0.369 0.368 0.359 0.352 0.367 0.358 0.352 0.356 0.361 0.362 0.354 0.365 0.363 0.371 0.363 0.371 0.371 0.378 0.361 0.362 0.369 0.368 0.354 0.365 0.363 0.371 0.355 0.374 0.364 0.381 0.364 0.381 0.374 0.387 0.363 0.371 0.371 0.378 5K 6K 7K 9 LCW CQ7P.EC Released Farbtemperatur 5000 K Color temperature 5000 K Gruppe Group 5H 6H 7H 8H 2011-07-25 Cx Cy Gruppe Group 5I Cx Cy 0.337 0.337 0.344 0.343 0.337 0.345 0.345 0.352 0.345 0.352 0.353 0.358 0.344 0.343 0.352 0.349 0.337 0.345 0.337 6I 0.345 0.352 0.353 0.346 0.360 0.346 0.360 0.354 0.367 0.345 0.352 0.353 0.358 0.337 0.353 0.338 /I 0.346 0.360 0.362 0.346 0.369 0.346 0.369 0.355 0.376 0.346 0.360 0.354 0.367 0.338 0.362 0.338 8I 0.346 0.369 0.370 0.347 0.378 0.347 0.378 0.356 0.385 0.346 0.369 0.355 0.376 10 LCW CQ7P.EC Released Durchlassspannungsgruppen6) Seite 23 Forward Voltage Groups6) page 23 Gruppe Group Durchlassspannung Forward voltage Einheit Unit min. max. 3 2.75 3.0 V 4 3.0 3.25 V 5 3.25 3.5 V Helligkeits-Gruppierungsschema Brightness Groups Lichtstrom1) Seite 23 Luminous Flux1) page 23 V (lm) Helligkeitsgruppe Brightness Group Lichtstarke2) Seite 23 Luminous Intensity2) page 23 IV (cd) 76.3 ... 82.0 82.0 ... 89.2 89.2 ... 97.0 97.0 ... 104.2 104.2 ... 112.0 112.0 ... 121.0 KQ KR KS KT KU LP 44.0 (typ.) 48.0 (typ.) 52.0 (typ.) 56.0 (typ.) 60.0 (typ.) 97.0 (typ.) Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus nur wenigen Helligkeitsgruppen. Einzelne Helligkeitsgruppen sind nicht bestellbar. Note: The standard shipping format for serial types includes a family group of only a few individual brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: KR-5U-3 Example: KR-5U-3 Helligkeitsgruppe Brightness Group Farbortgruppe Chromaticity Coordinate Group Durchlassspannung Forward Voltage KR 5U 3 Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Helligkeitsgruppe enthalten. Note: No packing unit / tape ever contains more than one brightness group. 2011-07-25 11 LCW CQ7P.EC Released Relative spektrale Emission2) Seite 23 Relative Spectral Emission2) page 23 V() = spektrale Augenempfindlichkeit / Standard eye response curve rel = f (); TS = 25 C; IF = 350 mA OHL04577 100 % rel 80 60 40 V 20 0 400 500 600 700 nm 800 Abstrahlcharakteristik2) Seite 23 Radiation Characteristic2) page 23 rel = f (); TS = 25 C 40 30 20 10 0 OHL04325 1.0 50 0.8 60 0.6 70 0.4 80 0.2 0 90 100 2011-07-25 1.0 0.8 0.6 0.4 0 12 20 40 60 80 100 120 LCW CQ7P.EC Released Durchlassstrom2) Seite 23 Forward Current2) page 23 IF = f (VF); TS = 25 C IF Relative Lichtstrom2) Seite 23 Relative Luminous Flux2) page 23 V/V(350 mA) = f (IF); TS = 25 C OHL04578 800 mA OHL04575 2.0 V V (350 mA) 1.5 600 1.0 400 0.5 200 0 2.8 3.0 3.2 3.4 3.6 V 3.8 Farbortverschiebung2) Seite 23 Chromaticity Coordinate Shift2) page 23 x, y = f (IF); TS = 25 C OHL04573 0.46 Cx, Cy 0.45 0.44 Cx 0.43 0.42 Cy 0.41 0.40 200 400 600 mA 800 IF 2011-07-25 200 400 600 mA 800 IF VF 13 LCW CQ7P.EC Released Relative Vorwartsspannung2) Seite 23 Relative Forward Voltage2) page 23 VF = VF - VF(25 C) = f (Tj); IF = 350 mA VF Relative Lichtstrom2) Seite 23 Relative Luminous Flux2) page 23 V/V(25 C) = f (Tj); IF = 350 mA OHL04428 0.3 V V (25 C) 0.2 0.1 0.8 0 0.6 -0.1 0.4 -0.2 0.2 -0.3 -40 -20 0 20 40 60 80 0 -40 -20 0 C 120 Farbortverschiebung2) Seite 23 Chromaticity Coordinate Shift2) page 23 x, y = f (Tj); IF = 350 mA OHL04574 0.50 Cx, Cy 0.40 Cx Cx 0.35 0.30 -40 -20 0 20 40 60 80 C 120 Tj 2011-07-25 20 40 60 80 C 120 Tj Tj 0.45 OHL04576 1.2 V 14 LCW CQ7P.EC Released Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (TS) OHL04652 1200 mA IF 800 600 400 200 Do not use current below 100 mA 0 0 20 40 60 80 100 C 140 TS Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TS = 85 C Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TS = 25 C IF OHL04611 2.2 A t tP T 1.8 1.6 1.4 0.5 1.0 IF D = TP 1.6 0.005 0.01 0.02 0.05 0.1 0.2 1.4 T D= 0.5 1.2 1.0 1 0.8 0.6 0.6 0.4 0.4 0.2 0.2 0.005 0.01 0.02 0.05 0.1 0.2 1 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2011-07-25 t tP 1.8 D= 1.2 0.8 IF IF D = TP OHL04611 2.2 A 15 LCW CQ7P.EC Released Mazeichnung5) Seite 23 Package Outlines5) page 23 Anm.: Die LED enthalt ein ESD-Bauteil, das parallel zum Chip geschalten ist. Note: LED is protected by ESD device which is connected in parallel to LED-Chip. Anm.: Das Gehause ist fur Ultraschallreinigung nicht geeignet Note: Package not suitable for ultra sonic cleaning Kathodenkennung: Cathode mark: Gewicht / Approx. weight: Markierung mark 2.5 mg Korrosionsfestigkeit besser als EN 60068-2-60 (method 4): mit erweitertem Korrosionstest: 40C / 90%rh / 15pp m H2S / 336h Corrosion robustness better than EN 60068-2-60 (method 4): with enhanced corrosion test: 40C / 90%rh / 15ppm H2S / 336h 2011-07-25 16 LCW CQ7P.EC Released Gurtung / Polaritat und Lage5) Seite 23 Verpackungseinheit 600/Rolle, o180 mm Method of Taping / Polarity and Orientation5) page 23 Packing unit 600/reel, o180 mm 2011-07-25 17 LCW CQ7P.EC Released Empfohlenes Lotpaddesign5) Seite 23 Recommended Solder Pad5) page 23 Reflow Loten Reflow Soldering Anm.: Weitere Informationen finden Sie in der Applikationsschrift Handling and Processing Details for Ceramic LEDs" Note: For further information please refer to our Application Note Handling and Processing Details for Ceramic LEDs" 2011-07-25 18 LCW CQ7P.EC Released Lotbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering (nach J-STD-020D.01) (acc. to J-STD-020D.01) OHA04525 300 C T 250 Tp 245 C 240 C tP 217 C 200 tL 150 tS 100 50 25 C 0 0 50 100 150 200 250 s 300 t Profile Feature Pb-Free (SnAgCu) Assembly Recommendation Max. Ratings Ramp-up Rate to Preheat*) 25C to 150C 2 C / s 3 C / s Time ts from TSmin to TSmax (150C to 200C 100 s min. 60 s max. 120 s Ramp-up Rate to Peak*) 180C to T P 2 C / s 3 C / s Liquidus Temperature TL 217C Time tL above TL 80 s max. 100 s Peak Temperature TP 245 C max. 260 C Time tP within 5C of the specified peak temperature TP - 5K 20 s min. 10 s max. 30 s Ramp-down Rate* TP to 100C 3K/s 6 K / s maximum Time 25C to Peak temperature max. 8 min. All temperatures refer to the center of the package, measured on the top of the component * slope calculation T/t: t max. 5 sec; fulfillment for the whole T-range 2011-07-25 19 LCW CQ7P.EC Released Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto BIN1: XX-XX-X-XXX-X LX XXXX Semiconductors RoHS Compliant (6P) BATCH NO: 1234567890 ML Temp ST 2 260 C R (1T) LOT NO: 1234567890 (9D) D/C: 1234 Pack: R18 DEMY 022 B_R999_1880.1642 R (X) PROD NO: 123456789(Q)QTY: 9999 (G) GROUP: XX-XX-X-X OHA04563 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm Leader: 400 mm Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W P0 P1 P2 D0 E F 12 + 0.3 - 0.1 4 0.1 8 0.1 2 0.05 1.5 + 0.1 1.75 0.1 5.5 0.05 (0.157 0.004) (0.315 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.217 0.002) Reel dimensions in mm (inch) A 180 (7) 2011-07-25 W Nmin W1 W2 max 12 (0.472) 60 (2.362) 12.4 + 2 (0.488 + 0.079) 18.4 (0.724) 20 LCW CQ7P.EC Released Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print Barcode label L VE l LE see labe k, If code blan bar ). (RH . idity N s IVE RS Otain TO SIT UC TIcon SEN U < RH hum 0% e tive d C/6 kag rela are 30 _ < infr pac of 90% to ak ns ed (pe or rs e). ND Hou rs rs Hou and ject ditio cod C, 72 sing Hou e 5 bag E 48 C sub Hou con s UR ICO ces 24 6 dat 40 be time C ory ThiISTSEM pro < time . or 23 time at t will C) l with or fact ent MO . Flo time s TO at or at Flo l tica d tha or ival ure nth OP Flo 4 if: rea w Flo labe mo ices iden 5 ced equ el n e 5a is el ing, belo or 24 pro 6 Lev e dev : el cod e , unt whe Lev el re ow, see bag Lev l dat re mo bak bar ned Lev refl istu 10% re led time sea for istu ore> re ope e Mo see istu k, is or . sea is has k, Mo bef istu d 033 Mo in Flo RH blan Mo or-p blan in bag Car ing, r TDlife (if If with t. r lf 10%bak or J-S thisvapp. Yea _ eks rs < r ed icat med, C 1 Yea tem She ow, at uire not > y 1 WeHou unt DE Afte Ind 4 uire refl is red req 2. bod Mo /JE time 168 req : 2b a) Sto ices idity time or is IPC or time b) ned Flo or Hum ing ce time or Dev 2a e Flo a) ope or 3. b) bakren Flo 1 l dat Flo If 2 refe time el 2a 4. el sea 3 Lev el and Lev el re Bag e Lev re Lev istu Dat re istu re Mo istu Mo istu Mo Mo A rs C 1. AM R OS Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM Desiccant OSR OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-sensitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials 8 1 R1 Q- lti LS TO Y T6 PL 76 1+ PGR OU (G) Mu o pt rs O to uc (9D ) AM nd 21 00 21 99 8 : 4 co 44 Y: 20 (Q) SR NO mi O H H1 23 Se BA TC 3G : 12 (6P ) 5 NO T 14 2 LO ) (1T 11 00 : OD NO DE T6 PL 76 MY 1 R1 8 Q- lti LS TO Y 1+ P: PGR (G) 44 Mu 8 o : 01 99 pt rs O to ) 21 uc D/C 20 00 QT Y: (Q) M 00 (9D nd 21 : 4 SR ico A NO 23 m O H H1 Se TC 3G BA ) : 12 5 OS ) (1T NO OD (X) PR : 11 00 LO T 14 2 (6P OU Muster ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Te 2a 220 mp 3 240 ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: (X) PR C NO D/C : 01 ). QT see labe 00 l k, N TIO U A P: Muster L VE LE code (RH blan If y bar . idit RH hum 60% e tive d C/ kag rela are 30 E S s _ < infr pac OR of tainITIV 90% to ak urs CT < e). or urs ted (pe ons con NS Ho g urs SE DU Ho and jec diti cod C, 72 sin Ho urs e 5 bag E ON 48 C sub e Ho con ces is UR 24 6 dat e MIC 40 be tim C h e ThISTSE pro < tory tim . or t wit 23 tim e at t will C) or fac MO . Flo al len tim s TO at or at Flo d or iva ure el nth s tha OP ntic Flo 4 if: rea Flo , lab ow mo ice equ ide 5 ced el e 5a is el ingen bel or 24 pro 6 Lev e dev, : el cod e , unt wh Lev el re ow see bag Lev l dat re mo bak e bar ned Lev refl istu 10% re led tim sea for istu ore> re ope se Mo see 3 istu is or . sea is Mo nk, bef istu pha nk, Flo , rd -03 Mo in RH bla Mo orbag bla hin ingCa TD life (if ar If wit t. vapp. 10%baktor J-S this elf Ye ar eks , _ < ed ica med, C 1 urs Ye erow tem Sh at uire not > y 1 WeHo unt DE Aft Ind 1. e 4 uire refl red req 2. bod Mo e ity is /JE tim 168 req : e 2b a) Sto es tim or mid is IPC or tim e vic b) ned Flo or Hu tim ing ce or De e 2a Flo a) ope or 3. b) bakren Flo dat e 1 l Flo If 2 el refe tim 2a 4. el sea 3 Lev g el and Lev el re Ba te Lev re Lev istu Da re istu re Mo istu Mo istu Mo Mo DE MY Barcode label ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Tem 2a 220 3 240 p ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: Barcode label Packing Sealing label M RA OHA02044 Dimensions of transportation box in mm (inch) Breite / Width 200 5 (7,874 0,1968) 2011-07-25 Lange / length Hohe / height 200 5 (7,874 0,1968) 30 5 (1,1811 0,1968) 21 LCW CQ7P.EC Released Revision History: Previous Version: 2011-07-25 2011-03-23 Page Subjects (major changes since last revision) Date of change all Preliminary data sheet created 2010-10-27 2 Ordering codes added 2011-01-17 all Final datasheet created 2011-03-23 20 Reel dimensions corrected 2011-07-25 Patent List Patent No. US 6 066 861 US 6 277 301 US 6 245 259 Wegen der Streichung der LED aus der IEC 60825 erfolgt die Bewertung der Augensicherheit nach dem Standard IEC 62471:2006 ("photobiological safety of lamps and lamp systems") Im Risikogruppensystem dieser CIE- Norm erfullen die in diesem Datenblatt angegebenen LED die "exempt"- Gruppe (die die sich im "sichtbaren" Spektralbereich auf eine Expositionsdauer von 10000 s bezieht). Unter realen Umstanden (fur Expositionsdauer, Augenpupille, Betrachtungsabstand) geht damit von diesen Bauelementen keinerlei Augengefahrdung aus. Grundsatzlich sollte jedoch erwahnt werden, dass intensive Lichtquellen durch ihre Blendwirkung ein hohes sekundares Gefahrenpotenzial besitzen. Wie nach dem Blick in andere helle Lichtquellen (z.B. Autoscheinwerfer) auch, konnen temporar eingeschranktes Sehvermogen und Nachbilder je nach Situation zu Irritationen, Belastigungen, Beeintrachtigungen oder sogar Unfallen fuhren. Due to the cancellation of the LED from IEC 60825, the evaluation of eye safety occurs according to the standard IEC 62471:2006 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LEDs specified in this data sheet fall into the "exempt" group (relating to devices in the visible spectrum with an exposure time of 10000 s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components6) page 23 may only be used in life-support devices or systems7) page 23 with the express written approval of OSRAM OS. 2011-07-25 22 LCW CQ7P.EC Released Funoten: 1) Helligkeitswerte werden wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 8 % und einer erweiterten Messunsicherheit von +/- 11 % gemessen (gema GUM mit Erweiterungsfaktor k = 3). 2) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 3) Farbkoordinaten werden wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 0,005 und einer erweiterten Messunsicherheit von +/- 0,01 gemessen (gema GUM mit Erweiterungsfaktor k = 3). 4) Vorwartsspannungen werden wahrend eines Strompulses einer typischen Dauer von 8 ms, mit einer internen Reproduzierbarkeit von +/- 0,05 V und einer erweiterten Messunsicherheit von +/- 0,1 V gemessen (gema GUM mit Erweiterungsfaktor k=3). 5) Mae werden wie folgt angegeben: mm (inch) 6) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. 7) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: Brightness values are measured during a current pulse of typical 25 ms, with an internal reproducibility of +/- 8 % and an expanded uncertainty of +/- 11 % (acc. to GUM with a coverage factor of k = 3). 1) 2) 3) 4) 5) 6) 7) Published by OSRAM Opto Semiconductors GmbH Leibnizstrasse 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2011-07-25 23 Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Chromaticity coordinates are measured during a current pulse of typical 25 ms, with an internal reproducibility of +/- 0,005 and an expanded uncertainty of +/- 0,01 (acc. to GUM with a coverage factor of k = 3). The forward voltage is measured during a current pulse of typical 8 ms, with an internal reproducibility of +/- 0,05 V and an expanded uncertainty of +/- 0,1 V (acc. to GUM with a coverage factor of k=3). Dimensions are specified as follows: mm (inch). A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.