BPS 0.5-08-00 - BIAS Power

BPS 0.5 Series Data Sheet, Page 1 of 5

BIAS Power Revised 01/26/2011 www.biaspower.com

Specifications subject to change

BIAS 1/2 Watt Power Supply

BPS 0.5 Series Data Sheet

Single (Vo) or Dual (Vo & Vr) Output

BPS 0.5-08-00, -08-33, -08-50

BPS 0.5-14-00, -14-33, -14-50

Features

• Universal Input (85-265 VAC, 50/60Hz)

• Small Size—0.55in

[9.0cm

]

• Low no-load input power <30mW

• Constant power mode, not current limit

• 3,000 VAC Isolation

• Up to 75% efficiency

• EN 55022, Class B; FCC Part 15, Class B

• Meets UL/CSA and EN Product Safety (ITE)

The BPS Power Supply Module is an ideal solution for numerous

control applications in lighting, sensing, smart building/home and

power distribution. This low-cost supply provides up to one-half

watt of output power at 8 or 14 VDC (Vo) and an optional 3.3 or 5

VDC (Vr) output for microprocessors, logic, timing circuits, transceiv-

ers, sensors or other control functions. A patented design incorpo-

rating a custom integrated circuit into a small package (0.55 in

[9.0

]) the BIAS Module provides an immediate “drop-in” solution,

requiring no additional external components.

Operating Specifications

(@120VAC / 60 Hz / 25°C unless otherwise specified)

Electrical

Input Voltage Range

85 - 265 VAC (50/60Hz)

Input Surge Withstand

308V, < 30 sec

Output Power (Pmax)

0.5 W min. (60Hz)

0.43 W min. (50Hz)

Efficiency

70% nom.

Output Vo (Peak)

8 or 14 VDC nom. +/- 5%

Line / Load Regulation Vo (Peak)

+/- 1% Po < Pmax

Temperature Regulation Vo (Peak)

+/- 2% Po < Pmax

Ripple Vo (@120 Hz)

(@ 100 kHz)

1.00 V p:p

0.25 V p:p

Output Vr, 3.3 volt (+/- 5%)

For Vo = 8V, Ir out 53mA max, Io+Ir ≤ 63mA*

For Vo = 14V, Ir out 23mA max, Io+Ir ≤ 36mA*

No-load Consumption

30 mW typical @ Vin=120 VAC

Isolation

3000 VAC (meets UL / CSA &

EN Product Safety)

Earth Leakage @ 120 VAC

< 10 uA

Short Circuit Protection

Continuous, Pin ≤ 0.6 w @ Vin = 120 VAC

Reliability @ 25° C, MIL HDBK-217F

> 500 Khr MTBF

Thermal

Operating Temperature

-30 to +70° C

Operating Relative Humidity

0 – 95%, non-condensing

Storage Temperature

-40 to +105° C

Mechanical

Package Size

(L x W x H)

1.10 x 0.92 x 0.55 inches

[27.94 x 23.24 x 13.97 mm]

Safety

Safety Compliance

UL / EN 60950-1 2

Ed. (CB Report Available)

EMI Emissions

EN 55022, Class B, FCC Part 15, Class B

Output Vr, 5.0 volt (+/- 5%)

For Vo = 8V, Ir out 63mA max, Io+Ir ≤ 63mA*

For Vo = 14V, Ir out 28mA max, Io+Ir ≤ 36mA*

Actual Size

Bias Power AC/DC power supplies are designed to be

applied in two major categories of applications…

Auxiliary, where the Bias supply is one of two or more sup-

plies and provides power for standby, housekeeping, bias-

ing or other requirements. Generally, these supply 3.3V or

5.0V requirements from the Vr output. In some cases a

small amount of Vo power is used.

Second is as a main or utility supply where Bias is the only

supply and provides all power necessary for the product or

system. Both Vr and Vo supplies are often utilized for opti-

mum system performance.

The characteristics of the Vo and Vr outputs are different

and each has application-specific benefits which can pro-

vide high value to the system designer.

Vo is a voltage-regulated output which has a constant

power mode instead of a conventional current limit. This

output is best suited to drive mechanical relays, solenoids,

SSRs, capacitive loads, indicating lights, LEDs and as a

source for isolated DC utility power which may be used

directly or post-regulated with either a linear regulator or a

DC/DC converter. Vo is self protecting, cannot be over-

loaded and can be shorted indefinitely. The graceful transi-

tion from voltage regulation to constant power along with

the wide range of product ratings, allows the designer to

select a supply tightly matched to the design load. There is

no need to oversize a Bias Power supply. Unlike design-

your-own, or partially complete modules where significant

design margin is required, to stay far away from current

limit, Bias’s constant power alternative requires no such

over-spec’ing.

Vr is also a voltage-regulated output and is thermally pro-

tected from overload. It has very low output ripple capable

of driving microprocessors , logic, transceivers, sensors and

other elements which require a low-noise, tightly-regulated

supply. In addition, Vr is supplied internally by Vo. This

means that any capacitance added to Vo can increase the

hold-up time of Vr as well.

*Note: maximum currents specified for constant voltage

range only. See V-I curve on page 2 for Vo in constant

power range.

BPS 0.5 Series Data Sheet, Page 2 of 5

BIAS Power Revised 01/26/2011 www.biaspower.com

Specifications subject to change

BIAS 1/2 Watt Power Supply

BPS 0.5 Series Data Sheet

Single (Vo) or Dual (Vo & Vr) Output

BPS 0.5-08-00, -08-33, -08-50

BPS 0.5-14-00, -14-33, -14-50

No Load Pow er VS Input Voltage

110

130

150

85 110 135 160 185 210 235 260

Input Voltage (Vac)

Input Power (mW)

P eak Repetitive P ulse Loading

250

500

750

1000

1250

1500

1750

2000

0.000 2.083 4.165 6.248 8.330

Tim e(m S)

Output Current(mA)

8V M ax

Ipk

14V

max Ipk

0 50 100 150 200 250

Vo, volts

Io, mA

V-I, typical

Constant Power Region

0 8.3 16.6 24.9 33.2 41.5 49.8

Vo, volts f or 8, 14 volt ratings

Time, mSec

Output Regulation, Vo

100% Load

50% Load

25% Load

EMI, Radiated Signal Strength, typical, dBμV/m

EMI, Conducted, dBμV

BPS 0.5 Series Data Sheet, Page 3 of 5

BIAS Power Revised 01/26/2011 www.biaspower.com

Specifications subject to change

BIAS 1/2 Watt Power Supply

BPS 0.5 Series Data Sheet

Single (Vo) or Dual (Vo & Vr) Output

BPS 0.5-08-00, -08-33, -08-50

BPS 0.5-14-00, -14-33, -14-50

Typical Output Pow e r VS Tem perature

50Hz

8V Model

0.45

0.50

0.55

0.60

0.65

0.70

0 10 20 30 40 50 60 70

Tem p (C)

Output Power (W)

85Vac

120Vac

240Vac

265Vac

Minim um Output Pow er VS Tem perature

50Hz

8V Model

0.40

0.45

0.50

0.55

0.60

0.65

0 10 20 30 40 50 60 70

Te m p (C)

Output Power (W)

85Vac

120Vac

240Vac

265Vac

Typical Output Pow e r VS Te m perature

60Hz

8V Model

0.55

0.60

0.65

0.70

0.75

0.80

0.85

0 10 20 30 40 50 60 70

Tem p (C)

Output Power (W)

85Vac

120Vac

240Vac

265Vac

Minim um Output Pow er VS Te m perature

60Hz

8V Model

0.50

0.55

0.60

0.65

0.70

0.75

0 10 20 30 40 50 60 70

Tem p (C)

Output Power (W)

85Vac

120Vac

240Vac

265Vac

BPS 0.5 Series Data Sheet, Page 4 of 5

BIAS Power Revised 01/26/2011 www.biaspower.com

Specifications subject to change

BIAS 1/2 Watt Power Supply

BPS 0.5 Series Data Sheet

Single (Vo) or Dual (Vo & Vr) Output

BPS 0.5-08-00, -08-33, -08-50

BPS 0.5-14-00, -14-33, -14-50

Typical Output Pow e r VS Te m perature

50Hz

14V Model

0.50

0.55

0.60

0.65

0.70

0.75

0.80

0 10 20 30 40 50 60 70

Tem p (C)

Output Power (W)

85Vac

120Vac

240Vac

265Vac

Minim um Output Pow er VS Tem perature

50Hz

14V Model

0.40

0.45

0.50

0.55

0.60

0.65

0 10 20 30 40 50 60 70

Tem p (C)

Output Power (W)

85Vac

120Vac

240Vac

265Vac

Typical Output Pow e r VS Te m perature

60Hz

14V Model

0.60

0.65

0.70

0.75

0.80

0.85

0.90

0.95

0 10 20 30 40 50 60 70

Tem p (C)

Output Power (W)

85Vac

120Vac

240Vac

265Vac

Minim um Output Pow er VS Te m perature

60Hz

14V Model

0.45

0.50

0.55

0.60

0.65

0.70

0.75

0 10 20 30 40 50 60 70

Tem p (C)

Output Power (W)

85Vac

120Vac

240Vac

265Vac

BPS 0.5 Series Data Sheet, Page 5 of 5

BIAS Power Revised 01/26/2011 www.biaspower.com

Specifications subject to change

BIAS 1/2 Watt Power Supply

BPS 0.5 Series Data Sheet

Single (Vo) or Dual (Vo & Vr) Output

BPS 0.5-08-00, -08-33, -08-50

BPS 0.5-14-00, -14-33, -14-50

Part Number Designation

Part Number

Output Configuration

BPS 0.5-08-00

Single output

8 VDC

N/A

BPS 0.5-14-00

Single output

14 VDC

N/A

BPS 0.5-08-50

Dual Output

8 VDC

5 VDC

BPS 0.5-14-33

Dual Output

14 VDC

3.3 VDC

BPS 0.5-08-33

Dual Output

8 VDC

3.3 VDC

BPS 0.5-14-50

Dual Output

14 VDC

5 VDC

For custom configurations, contact BIAS Power.

DESIGNATOR

DESCRIPTION

L1 Input High

L2 Input Low

N/C No Connection

Vo Output

GND Ground

Vr Vr Output

N/C No Connection

NOTES

1. Pins 0.031” [0.787 mm] round

2. Pins extend 0.125” [3.175 mm]

below stand-offs

Isolation, Bottom View

Recommended Land Pattern, top view

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

BIAS Power:

BPS 0.5-05-00 BPS 0.5-05-33 BPS 0.5-08-00 BPS 0.5-08-33 BPS 0.5-08-50 BPS 0.5-12-00 BPS 0.5-12-33 BPS

0.5-12-50 BPS 0.5-14-00 BPS 0.5-14-33 BPS 0.5-14-50 BPS 0.5-24-00 BPS 0.5-24-33 BPS 0.5-24-50