PATENTED
RGP10A THRU RGP10M
SINTERED GLASS PASSIVATED JUNCTION FAST RECOVERY RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere
FEATURES
MECHANICAL DATA
*GPRC (Glass Passivated Rectifier Chip) inside
*Glass passivated cavity-free junction
*Capable of meeting environmental standards of MIL-S-19500
*For use in high frequence rectifier circuits
*Fast switching for high efficiency
*1.0 Ampere operation at TA=55oC with no thermal runaway
*Typical IR less than 0.1uA
*High temperature soldering guaranteed: 260oC/10 seconds,
0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension
*Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
Case : JEDEC DO-204AL molded plastic over glass body
Terminals : Plated axial leads , solderable per MIL-STD-750,
Method 2026
Polarity : Color band denotes cathode end
Mounting Position : Any
Weight : 0.012 ounes , 0.3 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature
unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum average forward rectified current
0.375" (9.5mm) lead length (SEE FIG.1)
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
Maximum instantaneous forward voltage at 1.0 A
Maximum DC reverse current
at rated DC blocking voltage
TA=25oC
TA=125oC
TA=150oC
Maximum reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
SYMBOLS
VRRM
I (AV)
IFSM
VF
IR
trr
CJ
R JA
TJ,TSTG
RGP10
A B D G J JA K KA M MA
50 100 200 400 600 600 800 800 1000 1000
1.0
30
1.3
5
30
50
150 250 150 500 300 500 300
15
55
-65 to +175
UNITS
Volts
Maximum RMS voltage VRMS 35 70 140 280 420 420 560 560 700 700 Volts
Maximum DC blocking voltage VDC 50 100 200 400 600 600 800 800 1000 1000 Volts
Volts
Amps
Amps
uA
nS
pF
oC / W
oC
NOTES :(1)Reverse recovery test condition : IF 0.5A, IR=1.0A, Irr=0.25A
(2)Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3)Thermal resistance from junction to ambient at 0.375" (9.5mm) lead lengths, P.C.B. mounted.
Zowie Technology Corporation
REV. : 0
1.0(25.4)
MIN.
1.0(25.4)
MIN.
DO-204AL
*Dimensions in inches and (millimeters)
0.107(2.7)
0.034(0.86)
0.028(0.71)
0.205(5.2)
0.160(4.1)
0.080(2.0)
DIA.
DIA.
PATENTED
PATENTED
TM