SO5411 / SO5411(B) Semiconductor LED Lamp Features * Orange colored transparency lens type * 5mm(T-13/4)all plastic mold type * Low power consumption Outline Dimensions unit : STRAIGHT TYPE mm STOPPER TYPE 5.00.2 5.00.2 8.60.2 0.80.2 0.80.2 8.60.2 4.00.5 0.5 25.0 MIN 25.0 MIN 1.0 MIN 2.54 NOM 1.0 MIN 2.54 NOM 5.80.2 5.80 PIN Connections 1.Anode 2.Cathode KLO-0002-000 1 SO5411 / SO5411(B) Absolute maximum ratings Characteristic Symbol Ratings Unit Power Dissipation PD 85 mW Forward Current IF 30 mA IFP 50 mA Reverse Voltage VR 4 V Operating Temperature Topr -2585 Storage Temperature Tstg -30100 1 * Peak Forward Current 2 260 for 5 seconds * Soldering Temperature Tsol *1.Duty ratio = 1/16, Pulse width = 0.1ms *2. Keep the distance more than 2.0mm from PCB to the bottom of LED package Electrical Characteristics Characteristic Symbol Test Condition Forward Voltage VF IF= 20mA - 2.0 2.7 V Luminous Intensity IV IF= 20mA 40 100 - mcd IF= 20mA - 615 - nm IF= 20mA - 35 - nm Reverse Current P IR VR=4V - - 10 uA Half angle 1/2 IF= 20mA - 11 - deg Peak Wavelength Spectrum Bandwidth KLO-0002-000 Min. Typ. Max. Unit 2 SO5411 / SO5411(B) Characteristic Diagrams Fig. 2 IV - IF Luminous Intensity Iv [mcd] Forward Current IF [mA] Fig. 1 IF - VF Forward Voltage VF [V] Forward Current IF [mA] Fig.4 Spectrum Distribution Forward Relative Intensity [%] Current IF [mA] Fig. 3 IF - Ta Ambient Temperature Ta [] Wavelength [nm] Fig. 5 Radiation Diagram Relative Luminous Intensity Iv [%] KLO-0002-000 3